Re: [libvirt-users] Problem with net-define using Open vSwitch bridge
On 04/08/2013 05:20 PM, Will Dennis wrote:
Thanks, Laine, for your reply. The OVS bridge named
'vl20-ovsbr0' does
exist, but it is an Open vSwitch "fake bridge" -- see
http://blog.scottlowe.org/2012/10/19/vlans-with-open-vswitch-fake-bridge
s/ for why I'm doing this.
Here's some relevant output from my system:
# ifconfig | grep encap
eth0 Link encap:Ethernet HWaddr 00:25:90:aa:bb:cc
lo Link encap:Local Loopback
ovsbr0 Link encap:Ethernet HWaddr a2:c6:37:cd:90:4a
vl10-ovsbr0 Link encap:Ethernet HWaddr b6:c4:8c:69:2b:06
vl20-ovsbr0 Link encap:Ethernet HWaddr d6:d0:be:6e:b6:fb
# ovs-vsctl --real list-br
ovsbr0
# ovs-vsctl --fake list-br
vl10-ovsbr0
vl20-ovsbr0
# ovs-vsctl show
3e0d861b-efb7-46b1-af1b-4a76cd833558
Bridge "ovsbr0"
Controller "tcp:127.0.0.1:6633"
is_connected: true
Port "ovsbr0"
Interface "ovsbr0"
type: internal
Port "vl10-ovsbr0"
tag: 10
Interface "vl10-ovsbr0"
type: internal
Port "vl20-ovsbr0"
tag: 20
Interface "vl20-ovsbr0"
type: internal
# ovs-vsctl br-to-parent vl20-ovsbr0
ovsbr0
virsh # net-dumpxml 20-net
<network>
<name>20-net</name>
<uuid>9e2c2ce7-a193-17ec-d6c0-3f115e759e29</uuid>
<forward mode='bridge'/>
<bridge name='vl20-ovsbr0' />
<virtualport type='openvswitch'/>
</network>
This looks fine.
(I have no XML from the guest, as virt-manager will not let me create it
with the desired network...)
Is the problem that libvirt only can define networks with "real" OVS
bridges? That would be a bummer, since I need the VM's port tagged with
a specific VLAN... Or is there another workable way to do this?
Since this is the first time I've heard of an ovs "fake bridge", I
can't
really say for sure if it works correctly. However, I now see from your
2nd message that the reason for your initial failure was that you were
using a version of libvirt (0.9.4) that had no OVS support at all, and
that you've since upgraded to libvirt 1.0.4.
Meanwhile, the blog post that you reference above as the reason you're
using a "fake bridge" is saying that the reason to do this is to
overcome some unnamed bug in libvirt's OVS vlan support. That blog entry
was written in October 2012, and mentions that "Kyle" (probably Kyle
Mestery) had submitted a patch for [whatever the problem was]. I'm
unable to determine which bug or which patch they're talking about from
that information, but I don't believe there are any open bugs in OVS
vlan support, so it must have been pushed and so would definitely be
fixed in libvirt 1.0.4.
So, my advice is 1) stop using "fake bridges" and 2) use libvirt's ovs
vlan support, as described here:
http://www.siliconloons.com/?p=305
(It would be useful to make these "fake bridges" work properly though.
You can probably find the error message output by ovs-vsctl by looking
in /var/log/messages or /var/log/libvirt/libvirtd.log (it will be logged
by the libvirtd process). If you can post that message to this thread,
maybe someone will understand why it's failing, and we can push a fix
for it.)