10:36 a.m.
Hi,
It looks like , when adding a channel device, that the Guest must be powered off / on to
be able to detect
the new device . ( simple reboot isn't not enough)
Is there any way to avoid this power_cycle ?
Thx.
J.P. Ribeauville
P: +33.(0).1.47.17.27.87
Puteaux 3 Etage 5 Bureau 4
jpribeauville@axway.com<mailto:jpribeauville@axway.com>
http://www.axway.com<http://www.axway.com/>
P Pensez à l'environnement avant d'imprimer.
2:06 p.m.
New subject: [libvirt-users] When adding a channel device, we need a shutdown
On 28.08.2015 10:36, Jean-Pierre Ribeauville wrote:
Hi,
It looks like , when adding a channel device, that the Guest must be powered off / on
to be able to detect
the new device . ( simple reboot isn't not enough)
Is there any way to avoid this power_cycle ?
Yes, you can hotplug the device: virsh attach-device --live ...
It's supposed to be implemented since the 1.1.1 release.
Michal
4:37 p.m.
New subject: [libvirt-users] When adding a channel device, we need a shutdown
Hi,
"Yes, you can hotplug the device: virsh attach-device --live ...
It's supposed to be implemented since the 1.1.1 release."
Does it mean that a virsh attach-device --config (AFAIK , taken in account at next
guest reboot) should work
by using release to 1.1.1 ?
Thx.
J.P.
-----Message d'origine-----
De : Michal Privoznik [mailto:mprivozn@redhat.com]
Envoyé : mercredi 2 septembre 2015 14:07
À : Jean-Pierre Ribeauville; libvirt-users(a)redhat.com
Objet : Re: [libvirt-users] When adding a channel device, we need a shutdown
On 28.08.2015 10:36, Jean-Pierre Ribeauville wrote:
Hi,
It looks like , when adding a channel device, that the Guest must be powered off / on
to be able to detect
the new device . ( simple reboot isn't not enough)
Is there any way to avoid this power_cycle ?
Yes, you can hotplug the device: virsh attach-device --live ...
It's supposed to be implemented since the 1.1.1 release.
Michal
5:07 p.m.
New subject: [libvirt-users] When adding a channel device, we need a shutdown
On 07.09.2015 16:37, Jean-Pierre Ribeauville wrote:
Hi,
"Yes, you can hotplug the device: virsh attach-device --live ...
It's supposed to be implemented since the 1.1.1 release."
Does it mean that a virsh attach-device --config (AFAIK , taken in account at next
guest reboot) should work
by using release to 1.1.1 ?
Yes. Although I think there were some fixes after that. So you should
use the latest version possible anyway.
Michal
3297
days inactive
3307
days old
3 comments
2 participants
participants (2)
-
Jean-Pierre Ribeauville -
Michal Privoznik