9:13 a.m.
This is my system info:
Debian Release: 10.5
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 5.4.60-1-pve (SMP w/16 CPU cores)
Kernel taint flags: TAINT_PROPRIETARY_MODULE, TAINT_OOT_MODULE
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE=en_US:en
(charmap=UTF-8)
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Libvirt version 5.0.0
qemu
Version: 1:3.1+dfsg-8+deb10u7
I try to get the filtering bridge to work.
This is the host, with the br0 that is connected to a trunked port
================================
ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default
qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eno1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default
qlen 1000
link/ether 34:48:ed:f0:a9:e8 brd ff:ff:ff:ff:ff:ff
inet 10.12.0.13/24 brd 10.12.0.255 scope global eno1
valid_lft forever preferred_lft forever
inet6 fe80::3648:edff:fef0:a9e8/64 scope link
valid_lft forever preferred_lft forever
3: eno2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq master br0 state UP
group default qlen 1000
link/ether 34:48:ed:f0:a9:e9 brd ff:ff:ff:ff:ff:ff
inet6 fe80::3648:edff:fef0:a9e9/64 scope link
valid_lft forever preferred_lft forever
4: br0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group
default qlen 1000
link/ether e6:67:7b:87:b5:ca brd ff:ff:ff:ff:ff:ff
inet6 fe80::e467:7bff:fe87:b5ca/64 scope link
valid_lft forever preferred_lft forever
5: virbr0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN
group default qlen 1000
link/ether 52:54:00:2b:e3:f7 brd ff:ff:ff:ff:ff:ff
inet 192.168.122.1/24 brd 192.168.122.255 scope global virbr0
valid_lft forever preferred_lft forever
6: virbr0-nic: <BROADCAST,MULTICAST> mtu 1500 qdisc pfifo_fast master virbr0 state
DOWN group default qlen 1000
link/ether 52:54:00:2b:e3:f7 brd ff:ff:ff:ff:ff:ff
19: vnet0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master br0
state UNKNOWN group default qlen 1000
link/ether fe:54:00:fc:ea:e6 brd ff:ff:ff:ff:ff:ff
inet6 fe80::fc54:ff:fefc:eae6/64 scope link
valid_lft forever preferred_lft forever
===================
bridge vlan show
port vlan ids
eno2 4
7
221
800
br0 None
virbr0 1 PVID Egress Untagged
virbr0-nic 1 PVID Egress Untagged
vnet0 800
==================
however the mac does not show up when i do
==================
brctl showmacs br0
==================
so vnet0 does not yet communicate with the bridge
inside the vm:
=============================
ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default
qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: enp1s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP
group default qlen 1000
link/ether 52:54:00:fc:ea:e6 brd ff:ff:ff:ff:ff:ff
inet 195.37.235.121/26 brd 195.37.235.127 scope global enp1s0
valid_lft forever preferred_lft forever
inet6 fe80::5054:ff:fefc:eae6/64 scope link
valid_lft forever preferred_lft forever
===============================
and
===========
ping 8.8.8.8
PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.
From 195.37.235.121 icmp_seq=1 Destination Host Unreachable
From 195.37.235.121 icmp_seq=2 Destination Host Unreachable
==============
The mac address of vnet0 and enp1s0 is the same. That means they are the same entity.
yay!
The XML describing the network part of the VM is here:
=====================
<interface type='bridge'>
<mac address='52:54:00:29:b6:e0'/>
<source bridge='br0'/>
<model type='virtio'/>
<address type='pci' domain='0x0000' bus='0x01'
slot='0x00' function='0x0'/>
</interface>
=======================
what could be the problem?
2:34 a.m.
New subject: AW: debian 10, vm cant connect to the host bridge
I should have what i want to achive.
The server is intended as a host for VMs. Our network has multiple VLANs, and the VMs will
be connected to different VLANS. The interface eno1 is for host traffic and eno2 is
connected to the trunk port of the switch, making the different VLANS availabel to the VMs
via the br0. I want to use a VLAN-aware br0, so that I specify in my VM config (on the
host side) which VM connects to which VLAN.
is it true that br0 and eno2 need to have the same mac?
Someone suggested br0 needed an IP - is that generally true? The bridge is connected to
different VLANS (and to different subnets) and would need several IPs. I would have
expected the NICs of the VMs to get the IPs and the br0 to be level3 transparent.
________________________________
Von: Schuldei, Andreas
Gesendet: Sonntag, 6. September 2020 16:13:23
An: libvirt-users(a)redhat.com
Betreff: debian 10, vm cant connect to the host bridge
This is my system info:
Debian Release: 10.5
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 5.4.60-1-pve (SMP w/16 CPU cores)
Kernel taint flags: TAINT_PROPRIETARY_MODULE, TAINT_OOT_MODULE
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE=en_US:en
(charmap=UTF-8)
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Libvirt version 5.0.0
qemu
Version: 1:3.1+dfsg-8+deb10u7
I try to get the filtering bridge to work.
This is the host, with the br0 that is connected to a trunked port
================================
ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default
qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eno1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default
qlen 1000
link/ether 34:48:ed:f0:a9:e8 brd ff:ff:ff:ff:ff:ff
inet 10.12.0.13/24 brd 10.12.0.255 scope global eno1
valid_lft forever preferred_lft forever
inet6 fe80::3648:edff:fef0:a9e8/64 scope link
valid_lft forever preferred_lft forever
3: eno2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq master br0 state UP
group default qlen 1000
link/ether 34:48:ed:f0:a9:e9 brd ff:ff:ff:ff:ff:ff
inet6 fe80::3648:edff:fef0:a9e9/64 scope link
valid_lft forever preferred_lft forever
4: br0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group
default qlen 1000
link/ether e6:67:7b:87:b5:ca brd ff:ff:ff:ff:ff:ff
inet6 fe80::e467:7bff:fe87:b5ca/64 scope link
valid_lft forever preferred_lft forever
5: virbr0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN
group default qlen 1000
link/ether 52:54:00:2b:e3:f7 brd ff:ff:ff:ff:ff:ff
inet 192.168.122.1/24 brd 192.168.122.255 scope global virbr0
valid_lft forever preferred_lft forever
6: virbr0-nic: <BROADCAST,MULTICAST> mtu 1500 qdisc pfifo_fast master virbr0 state
DOWN group default qlen 1000
link/ether 52:54:00:2b:e3:f7 brd ff:ff:ff:ff:ff:ff
19: vnet0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master br0
state UNKNOWN group default qlen 1000
link/ether fe:54:00:fc:ea:e6 brd ff:ff:ff:ff:ff:ff
inet6 fe80::fc54:ff:fefc:eae6/64 scope link
valid_lft forever preferred_lft forever
===================
bridge vlan show
port vlan ids
eno2 4
7
221
800
br0 None
virbr0 1 PVID Egress Untagged
virbr0-nic 1 PVID Egress Untagged
vnet0 800
==================
however the mac does not show up when i do
==================
brctl showmacs br0
==================
so vnet0 does not yet communicate with the bridge
inside the vm:
=============================
ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default
qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: enp1s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP
group default qlen 1000
link/ether 52:54:00:fc:ea:e6 brd ff:ff:ff:ff:ff:ff
inet 195.37.235.121/26 brd 195.37.235.127 scope global enp1s0
valid_lft forever preferred_lft forever
inet6 fe80::5054:ff:fefc:eae6/64 scope link
valid_lft forever preferred_lft forever
===============================
and
===========
ping 8.8.8.8
PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.
From 195.37.235.121 icmp_seq=1 Destination Host Unreachable
From 195.37.235.121 icmp_seq=2 Destination Host Unreachable
==============
The mac address of vnet0 and enp1s0 is the same. That means they are the same entity.
yay!
The XML describing the network part of the VM is here:
=====================
<interface type='bridge'>
<mac address='52:54:00:29:b6:e0'/>
<source bridge='br0'/>
<model type='virtio'/>
<address type='pci' domain='0x0000' bus='0x01'
slot='0x00' function='0x0'/>
</interface>
=======================
what could be the problem?
5:49 a.m.
New subject: AW: debian 10, vm cant connect to the host bridge
someone recommended that i should give br0 the same hardware address as eno2. I did that,
and restarted the vm, and it still does not work.
Here is my current host interface config:
ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default
qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eno1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default
qlen 1000
link/ether 34:48:ed:f0:a9:e8 brd ff:ff:ff:ff:ff:ff
inet 10.12.0.13/24 brd 10.12.0.255 scope global eno1
valid_lft forever preferred_lft forever
inet6 fe80::3648:edff:fef0:a9e8/64 scope link
valid_lft forever preferred_lft forever
3: eno2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq master br0 state UP
group default qlen 1000
link/ether 34:48:ed:f0:a9:e9 brd ff:ff:ff:ff:ff:ff
inet6 fe80::3648:edff:fef0:a9e9/64 scope link
valid_lft forever preferred_lft forever
4: br0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group
default qlen 1000
link/ether 34:48:ed:f0:a9:e9 brd ff:ff:ff:ff:ff:ff
inet6 fe80::e467:7bff:fe87:b5ca/64 scope link
valid_lft forever preferred_lft forever
5: virbr0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN
group default qlen 1000
link/ether 52:54:00:2b:e3:f7 brd ff:ff:ff:ff:ff:ff
inet 192.168.122.1/24 brd 192.168.122.255 scope global virbr0
valid_lft forever preferred_lft forever
6: virbr0-nic: <BROADCAST,MULTICAST> mtu 1500 qdisc pfifo_fast master virbr0 state
DOWN group default qlen 1000
link/ether 52:54:00:2b:e3:f7 brd ff:ff:ff:ff:ff:ff
20: vnet0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master br0
state UNKNOWN group default qlen 1000
link/ether fe:54:00:29:b6:e0 brd ff:ff:ff:ff:ff:ff
inet6 fe80::fc54:ff:fe29:b6e0/64 scope link
valid_lft forever preferred_lft forever
________________________________
Von: Schuldei, Andreas
Gesendet: Montag, 7. September 2020 09:34:44
An: libvirt-users(a)redhat.com
Betreff: AW: debian 10, vm cant connect to the host bridge
I should have what i want to achive.
The server is intended as a host for VMs. Our network has multiple VLANs, and the VMs will
be connected to different VLANS. The interface eno1 is for host traffic and eno2 is
connected to the trunk port of the switch, making the different VLANS availabel to the VMs
via the br0. I want to use a VLAN-aware br0, so that I specify in my VM config (on the
host side) which VM connects to which VLAN.
is it true that br0 and eno2 need to have the same mac?
Someone suggested br0 needed an IP - is that generally true? The bridge is connected to
different VLANS (and to different subnets) and would need several IPs. I would have
expected the NICs of the VMs to get the IPs and the br0 to be level3 transparent.
________________________________
Von: Schuldei, Andreas
Gesendet: Sonntag, 6. September 2020 16:13:23
An: libvirt-users(a)redhat.com
Betreff: debian 10, vm cant connect to the host bridge
This is my system info:
Debian Release: 10.5
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 5.4.60-1-pve (SMP w/16 CPU cores)
Kernel taint flags: TAINT_PROPRIETARY_MODULE, TAINT_OOT_MODULE
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE=en_US:en
(charmap=UTF-8)
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Libvirt version 5.0.0
qemu
Version: 1:3.1+dfsg-8+deb10u7
I try to get the filtering bridge to work.
This is the host, with the br0 that is connected to a trunked port
================================
ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default
qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eno1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default
qlen 1000
link/ether 34:48:ed:f0:a9:e8 brd ff:ff:ff:ff:ff:ff
inet 10.12.0.13/24 brd 10.12.0.255 scope global eno1
valid_lft forever preferred_lft forever
inet6 fe80::3648:edff:fef0:a9e8/64 scope link
valid_lft forever preferred_lft forever
3: eno2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq master br0 state UP
group default qlen 1000
link/ether 34:48:ed:f0:a9:e9 brd ff:ff:ff:ff:ff:ff
inet6 fe80::3648:edff:fef0:a9e9/64 scope link
valid_lft forever preferred_lft forever
4: br0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group
default qlen 1000
link/ether e6:67:7b:87:b5:ca brd ff:ff:ff:ff:ff:ff
inet6 fe80::e467:7bff:fe87:b5ca/64 scope link
valid_lft forever preferred_lft forever
5: virbr0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN
group default qlen 1000
link/ether 52:54:00:2b:e3:f7 brd ff:ff:ff:ff:ff:ff
inet 192.168.122.1/24 brd 192.168.122.255 scope global virbr0
valid_lft forever preferred_lft forever
6: virbr0-nic: <BROADCAST,MULTICAST> mtu 1500 qdisc pfifo_fast master virbr0 state
DOWN group default qlen 1000
link/ether 52:54:00:2b:e3:f7 brd ff:ff:ff:ff:ff:ff
19: vnet0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master br0
state UNKNOWN group default qlen 1000
link/ether fe:54:00:fc:ea:e6 brd ff:ff:ff:ff:ff:ff
inet6 fe80::fc54:ff:fefc:eae6/64 scope link
valid_lft forever preferred_lft forever
===================
bridge vlan show
port vlan ids
eno2 4
7
221
800
br0 None
virbr0 1 PVID Egress Untagged
virbr0-nic 1 PVID Egress Untagged
vnet0 800
==================
however the mac does not show up when i do
==================
brctl showmacs br0
==================
so vnet0 does not yet communicate with the bridge
inside the vm:
=============================
ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default
qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: enp1s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP
group default qlen 1000
link/ether 52:54:00:fc:ea:e6 brd ff:ff:ff:ff:ff:ff
inet 195.37.235.121/26 brd 195.37.235.127 scope global enp1s0
valid_lft forever preferred_lft forever
inet6 fe80::5054:ff:fefc:eae6/64 scope link
valid_lft forever preferred_lft forever
===============================
and
===========
ping 8.8.8.8
PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.
From 195.37.235.121 icmp_seq=1 Destination Host Unreachable
From 195.37.235.121 icmp_seq=2 Destination Host Unreachable
==============
The mac address of vnet0 and enp1s0 is the same. That means they are the same entity.
yay!
The XML describing the network part of the VM is here:
=====================
<interface type='bridge'>
<mac address='52:54:00:29:b6:e0'/>
<source bridge='br0'/>
<model type='virtio'/>
<address type='pci' domain='0x0000' bus='0x01'
slot='0x00' function='0x0'/>
</interface>
=======================
what could be the problem?
11:36 a.m.
Hi
Am 07.09.20 um 12:49 schrieb Schuldei, Andreas:
someone recommended that i should give br0 the same hardware address
as eno2.
Not in all cases. The example attached in the quotation below looks a little bit
confused.... there is more then one Bridge.
If I create an isolated guest-network with "virsh net-start default", i.e. with
NAT/netfilter and DHCP/dnsmasq, it looks like
the following example... the virtual MAC addresses are not identical to eth0.
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master br0
state UP group default qlen 1000
link/ether d0:50:12:34:56:78 brd ff:ff:ff:ff:ff:ff
10: virbr0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN
group default qlen 1000
link/ether 52:54:00:0a:cd:21 brd ff:ff:ff:ff:ff:ff
inet 192.168.122.1/24 brd 192.168.122.255 scope global virbr0
valid_lft forever preferred_lft forever
11: virbr0-nic: <BROADCAST,MULTICAST> mtu 1500 qdisc pfifo_fast master virbr0 state
DOWN group default qlen 1000
link/ether 52:54:00:0a:cd:21 brd ff:ff:ff:ff:ff:ff
If I set up the VM as an integrated LAN-Client, 'virbr0-nic' is not necessary,
because the virtual NICs are connected directly
to br0 as master. Then it looks different with the MACs, the virtual interface for the
running VM has its own MAC and the VM
itself can receive a regulare LAN-IP from LAN-DHCP-Server, e.g. from DSL-Router in
private.
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master br0
state UP group default qlen 1000
link/ether d0:50:12:34:56:78 brd ff:ff:ff:ff:ff:ff
12: br0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group
default qlen 1000
link/ether d0:50:12:34:56:78 brd ff:ff:ff:ff:ff:ff
inet 10.0.1.20/24 brd 10.10.1.255 scope global dynamic br0
valid_lft 862367sec preferred_lft 862367sec
13: vnet0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master br0
state UNKNOWN group default qlen 1000
link/ether fe:54:00:e6:57:ff brd ff:ff:ff:ff:ff:ff
Imho you have to differentiate, whether the VM is running in an isolated network or the VM
is running as a regular LAN client.
HTH & BR, Tom
ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default
qlen 1000
   link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
   inet 127.0.0.1/8 scope host lo
      valid_lft forever preferred_lft forever
   inet6 ::1/128 scope host
      valid_lft forever preferred_lft forever
2: eno1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default
qlen 1000
   link/ether 34:48:ed:f0:a9:e8 brd ff:ff:ff:ff:ff:ff
   inet 10.12.0.13/24 brd 10.12.0.255 scope global eno1
      valid_lft forever preferred_lft forever
   inet6 fe80::3648:edff:fef0:a9e8/64 scope link
      valid_lft forever preferred_lft forever
3: eno2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq master br0 state UP
group default qlen 1000
   link/ether 34:48:ed:f0:a9:e9 brd ff:ff:ff:ff:ff:ff
   inet6 fe80::3648:edff:fef0:a9e9/64 scope link
      valid_lft forever preferred_lft forever
4: br0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group
default qlen 1000
   link/ether 34:48:ed:f0:a9:e9 brd ff:ff:ff:ff:ff:ff
   inet6 fe80::e467:7bff:fe87:b5ca/64 scope link
      valid_lft forever preferred_lft forever
5: virbr0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN
group default qlen 1000
   link/ether 52:54:00:2b:e3:f7 brd ff:ff:ff:ff:ff:ff
   inet 192.168.122.1/24 brd 192.168.122.255 scope global virbr0
      valid_lft forever preferred_lft forever
6: virbr0-nic: <BROADCAST,MULTICAST> mtu 1500 qdisc pfifo_fast master virbr0 state
DOWN group default qlen 1000
   link/ether 52:54:00:2b:e3:f7 brd ff:ff:ff:ff:ff:ff
20: vnet0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master br0
state UNKNOWN group default qlen 1000
   link/ether fe:54:00:29:b6:e0 brd ff:ff:ff:ff:ff:ff
   inet6 fe80::fc54:ff:fe29:b6e0/64 scope link
      valid_lft forever preferred_lft forever
1537
days inactive
1538
days old
3 comments
2 participants
participants (2)
-
Schuldei, Andreas -
Thomas Luening