Hi Guys, I have hit an issue on testing against our testbed, It's failed to eject cdrom media after reboot from installed the guest OS. The reproduce step: 1. Attach a block device with a ISO media and start install VM from ISO. 2. <disk type='block' device='cdrom'> <driver name='qemu' type='raw'/> <source dev='/dev/disk/by-id/pbdx-vol-cfe60dca-c271-491b-be3c-11fa8d7625a4' index='6'/> <backingStore/> <target dev='hda' bus='ide' tray='open'/> <readonly/> <alias name='ide0-0-0'/> <address type='drive' controller='0' bus='0' target='0' unit='0'/> </disk> 3. After installed the OS and reboot from system disk successful. 4. Then I want to eject CDROM through update device with the xml like below or using virsh tool 'virsh change-media iso_test hda --eject' 5. All those will failed at "internal error: unable to execute QEMU command 'blockdev-remove-medium': Tray of device 'ide0-0-0' is not open" <disk type='block' device='cdrom'> <driver name='qemu' type='raw'/> <backingStore/> <target dev='hda' bus='ide' tray='open'/> <readonly/> <alias name='ide0-0-0'/> <address type='drive' controller='0' bus='0' target='0' unit='0'/> </disk> block info looks like below: virsh qemu-monitor-command iso_test --hmp info block setlocale: No such file or directory libvirt-6-format: /dev/disk/by-id/pbdx-vol-cfe60dca-c271-491b-be3c-11fa8d7625a4 (raw, read-only) Attached to: ide0-0-0 Removable device: locked, tray closed Cache mode: writeback Reproduce envrionment: Operating system: rhat8.4 Architecture:x86 kernel version:4.18.0-305 libvirt version:v7.9.0(private build) Hypervisor and version:QEMU 5.1.0(private build) Is there any workaround? Any comments are appreciated. Thanks!