5:08 p.m.
Hey all,
I am new to libvirt lxc and am trying to get a container that i can
ssh to. So far i've booted up a container and gave it an Ip address,
it can ping out and I can ping it but I cannot get ssh to work.
When i try to run an ssh command inside the container I get a command
not found error. here is my xml file
<domain type='lxc'>
<name>helloworld</name>
<memory>102400</memory>
<os>
<type>exe</type>
<init>/bin/sh</init>
</os>
<devices>
<console type='pty'/>
<filesystem type='mount'>
<source dir='/export/helloworld/config'/>
<target dir='/etc/httpd'/>
</filesystem>
<filesystem type='mount'>
<source dir='/export/helloworld/data'/>
<target dir='/var/www'/>
</filesystem>
<interface type='bridge'>
<mac address='52:54:00:5e:02:45'/>
<source bridge='br0'/>
<address type='pci' domain='0x0000' bus='0x00'
slot='0x03'
function='0x0'/>
<model type='virtio' />
</interface>
</devices>
</domain>
I havent restricted it with busybox for simplicity thinking it was
because I wasn't allowing it access to necessary ssh files, but Im not
sure what I am missing now.
surely someone has done this before.
thanks
--
Brandon Foster
Infrastructure Administrator
Liferay, Inc.
Enterprise. Open Source. For life.
6:36 p.m.
I was actually able to get ssh to work from the container but using
the full path of the command /usr/bin/ssh, and after I did that i was
able to ssh to the container, but after i logged in it closed the
connection
any ideas?
I found in another thread that I am supposed to set a $Path for my
container, but it wasnt fully explained. I assume this is why it
wouldnt read the ssh command without the full path, could someone give
me an example of where and how to set that?
On Thu, Feb 28, 2013 at 3:08 PM, Brandon Foster
<brandon.foster(a)liferay.com> wrote:
Hey all,
I am new to libvirt lxc and am trying to get a container that i can
ssh to. So far i've booted up a container and gave it an Ip address,
it can ping out and I can ping it but I cannot get ssh to work.
When i try to run an ssh command inside the container I get a command
not found error. here is my xml file
<domain type='lxc'>
<name>helloworld</name>
<memory>102400</memory>
<os>
<type>exe</type>
<init>/bin/sh</init>
</os>
<devices>
<console type='pty'/>
<filesystem type='mount'>
<source dir='/export/helloworld/config'/>
<target dir='/etc/httpd'/>
</filesystem>
<filesystem type='mount'>
<source dir='/export/helloworld/data'/>
<target dir='/var/www'/>
</filesystem>
<interface type='bridge'>
<mac address='52:54:00:5e:02:45'/>
<source bridge='br0'/>
<address type='pci' domain='0x0000' bus='0x00'
slot='0x03'
function='0x0'/>
<model type='virtio' />
</interface>
</devices>
</domain>
I havent restricted it with busybox for simplicity thinking it was
because I wasn't allowing it access to necessary ssh files, but Im not
sure what I am missing now.
surely someone has done this before.
thanks
--
Brandon Foster
Infrastructure Administrator
Liferay, Inc.
Enterprise. Open Source. For life.
--
Brandon Foster
Infrastructure Administrator
Liferay, Inc.
Enterprise. Open Source. For life.
1:59 p.m.
More information.
So to recap, i've set up a LXC guest. it has an ip, it can ping out,
other computers on the network can ping it, I can ssh to the host
machine, and I can ssh from the lxc guest (after consoling in). But i
cannot ssh to the lxc guest from the network, from the host, or from
the lxc guest itself.
to limit the number of problems ive decided to try and ssh to local
host while consoled to the lxc guest.
here are the results:
----------------------------------------------------
root@virt-host-1:/> ssh -vvv localhost
OpenSSH_5.3p1, OpenSSL 1.0.0-fips 29 Mar 2010
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: Applying options for *
debug2: ssh_connect: needpriv 0
debug1: Connecting to localhost [::1] port 22.
debug1: Connection established.
debug1: permanently_set_uid: 0/0
debug1: identity file /root/.ssh/identity type -1
debug1: identity file /root/.ssh/id_rsa type -1
debug1: identity file /root/.ssh/id_dsa type -1
debug1: Remote protocol version 2.0, remote software version OpenSSH_5.3
debug1: match: OpenSSH_5.3 pat OpenSSH*
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_5.3
debug2: fd 3 setting O_NONBLOCK
debug1: SSH2_MSG_KEXINIT sent
debug3: Wrote 792 bytes for a total of 813
debug1: SSH2_MSG_KEXINIT received
debug2: kex_parse_kexinit:
diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
debug2: kex_parse_kexinit:
aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rijndael-cbc(a)lysator.liu.se
debug2: kex_parse_kexinit:
aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rijndael-cbc(a)lysator.liu.se
debug2: kex_parse_kexinit:
hmac-md5,hmac-sha1,umac-64@openssh.com,hmac-ripemd160,hmac-ripemd160(a)openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit:
hmac-md5,hmac-sha1,umac-64@openssh.com,hmac-ripemd160,hmac-ripemd160(a)openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,zlib(a)openssh.com,zlib
debug2: kex_parse_kexinit: none,zlib(a)openssh.com,zlib
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: kex_parse_kexinit:
diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
debug2: kex_parse_kexinit:
aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rijndael-cbc(a)lysator.liu.se
debug2: kex_parse_kexinit:
aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rijndael-cbc(a)lysator.liu.se
debug2: kex_parse_kexinit:
hmac-md5,hmac-sha1,umac-64@openssh.com,hmac-ripemd160,hmac-ripemd160(a)openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit:
hmac-md5,hmac-sha1,umac-64@openssh.com,hmac-ripemd160,hmac-ripemd160(a)openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,zlib(a)openssh.com
debug2: kex_parse_kexinit: none,zlib(a)openssh.com
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: mac_setup: found hmac-md5
debug1: kex: server->client aes128-ctr hmac-md5 none
debug2: mac_setup: found hmac-md5
debug1: kex: client->server aes128-ctr hmac-md5 none
debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
debug3: Wrote 24 bytes for a total of 837
debug2: dh_gen_key: priv key bits set: 144/256
debug2: bits set: 508/1024
debug1: SSH2_MSG_KEX_DH_GEX_INIT sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY
debug3: Wrote 144 bytes for a total of 981
debug3: check_host_in_hostfile: filename /root/.ssh/known_hosts
debug3: check_host_in_hostfile: match line 2
debug1: Host 'localhost' is known and matches the RSA host key.
debug1: Found key in /root/.ssh/known_hosts:2
debug2: bits set: 528/1024
debug1: ssh_rsa_verify: signature correct
debug2: kex_derive_keys
debug2: set_newkeys: mode 1
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug3: Wrote 16 bytes for a total of 997
debug2: set_newkeys: mode 0
debug1: SSH2_MSG_NEWKEYS received
debug1: SSH2_MSG_SERVICE_REQUEST sent
debug3: Wrote 48 bytes for a total of 1045
debug2: service_accept: ssh-userauth
debug1: SSH2_MSG_SERVICE_ACCEPT received
debug2: key: /root/.ssh/identity ((nil))
debug2: key: /root/.ssh/id_rsa ((nil))
debug2: key: /root/.ssh/id_dsa ((nil))
debug3: Wrote 64 bytes for a total of 1109
debug1: Authentications that can continue: publickey,password
debug3: start over, passed a different list publickey,password
debug3: preferred
gssapi-keyex,gssapi-with-mic,publickey,keyboard-interactive,password
debug3: authmethod_lookup publickey
debug3: remaining preferred: keyboard-interactive,password
debug3: authmethod_is_enabled publickey
debug1: Next authentication method: publickey
debug1: Trying private key: /root/.ssh/identity
debug3: no such identity: /root/.ssh/identity
debug1: Trying private key: /root/.ssh/id_rsa
debug3: no such identity: /root/.ssh/id_rsa
debug1: Trying private key: /root/.ssh/id_dsa
debug3: no such identity: /root/.ssh/id_dsa
debug2: we did not send a packet, disable method
debug3: authmethod_lookup password
debug3: remaining preferred: ,password
debug3: authmethod_is_enabled password
debug1: Next authentication method: password
root@localhost's password:
debug3: packet_send2: adding 64 (len 59 padlen 5 extra_pad 64)
debug2: we sent a password packet, wait for reply
debug3: Wrote 144 bytes for a total of 1253
debug1: Authentication succeeded (password).
debug1: channel 0: new [client-session]
debug3: ssh_session2_open: channel_new: 0
debug2: channel 0: send open
debug1: Requesting no-more-sessions(a)openssh.com
debug1: Entering interactive session.
debug3: Wrote 128 bytes for a total of 1381
debug3: Wrote -1 bytes for a total of 1381
Write failed: Broken pipe
-------------------------------------------
it accepts my log in, but fails after that.
any clues?
On Thu, Feb 28, 2013 at 4:36 PM, Brandon Foster
<brandon.foster(a)liferay.com> wrote:
I was actually able to get ssh to work from the container but using
the full path of the command /usr/bin/ssh, and after I did that i was
able to ssh to the container, but after i logged in it closed the
connection
any ideas?
I found in another thread that I am supposed to set a $Path for my
container, but it wasnt fully explained. I assume this is why it
wouldnt read the ssh command without the full path, could someone give
me an example of where and how to set that?
On Thu, Feb 28, 2013 at 3:08 PM, Brandon Foster
<brandon.foster(a)liferay.com> wrote:
> Hey all,
> I am new to libvirt lxc and am trying to get a container that i can
> ssh to. So far i've booted up a container and gave it an Ip address,
> it can ping out and I can ping it but I cannot get ssh to work.
> When i try to run an ssh command inside the container I get a command
> not found error. here is my xml file
>
> <domain type='lxc'>
> <name>helloworld</name>
> <memory>102400</memory>
> <os>
> <type>exe</type>
> <init>/bin/sh</init>
> </os>
> <devices>
> <console type='pty'/>
> <filesystem type='mount'>
> <source dir='/export/helloworld/config'/>
> <target dir='/etc/httpd'/>
> </filesystem>
> <filesystem type='mount'>
> <source dir='/export/helloworld/data'/>
> <target dir='/var/www'/>
> </filesystem>
> <interface type='bridge'>
> <mac address='52:54:00:5e:02:45'/>
> <source bridge='br0'/>
> <address type='pci' domain='0x0000' bus='0x00'
slot='0x03'
> function='0x0'/>
> <model type='virtio' />
> </interface>
> </devices>
> </domain>
>
> I havent restricted it with busybox for simplicity thinking it was
> because I wasn't allowing it access to necessary ssh files, but Im not
> sure what I am missing now.
>
> surely someone has done this before.
>
> thanks
> --
> Brandon Foster
> Infrastructure Administrator
>
> Liferay, Inc.
> Enterprise. Open Source. For life.
--
Brandon Foster
Infrastructure Administrator
Liferay, Inc.
Enterprise. Open Source. For life.
--
Brandon Foster
Infrastructure Administrator
Liferay, Inc.
Enterprise. Open Source. For life.
2:05 p.m.
On Mon, Mar 4, 2013 at 11:59 AM, Brandon Foster
<brandon.foster(a)liferay.com> wrote:
More information.
So to recap, i've set up a LXC guest. it has an ip, it can ping out,
other computers on the network can ping it, I can ssh to the host
machine, and I can ssh from the lxc guest (after consoling in). But i
cannot ssh to the lxc guest from the network, from the host, or from
the lxc guest itself.
to limit the number of problems ive decided to try and ssh to local
host while consoled to the lxc guest.
here are the results:
----------------------------------------------------
root@virt-host-1:/> ssh -vvv localhost
OpenSSH_5.3p1, OpenSSL 1.0.0-fips 29 Mar 2010
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: Applying options for *
debug2: ssh_connect: needpriv 0
debug1: Connecting to localhost [::1] port 22.
debug1: Connection established.
debug1: permanently_set_uid: 0/0
debug1: identity file /root/.ssh/identity type -1
debug1: identity file /root/.ssh/id_rsa type -1
debug1: identity file /root/.ssh/id_dsa type -1
debug1: Remote protocol version 2.0, remote software version OpenSSH_5.3
debug1: match: OpenSSH_5.3 pat OpenSSH*
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_5.3
debug2: fd 3 setting O_NONBLOCK
debug1: SSH2_MSG_KEXINIT sent
debug3: Wrote 792 bytes for a total of 813
debug1: SSH2_MSG_KEXINIT received
debug2: kex_parse_kexinit:
diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
debug2: kex_parse_kexinit:
aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rijndael-cbc(a)lysator.liu.se
debug2: kex_parse_kexinit:
aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rijndael-cbc(a)lysator.liu.se
debug2: kex_parse_kexinit:
hmac-md5,hmac-sha1,umac-64@openssh.com,hmac-ripemd160,hmac-ripemd160(a)openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit:
hmac-md5,hmac-sha1,umac-64@openssh.com,hmac-ripemd160,hmac-ripemd160(a)openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,zlib(a)openssh.com,zlib
debug2: kex_parse_kexinit: none,zlib(a)openssh.com,zlib
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: kex_parse_kexinit:
diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
debug2: kex_parse_kexinit:
aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rijndael-cbc(a)lysator.liu.se
debug2: kex_parse_kexinit:
aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rijndael-cbc(a)lysator.liu.se
debug2: kex_parse_kexinit:
hmac-md5,hmac-sha1,umac-64@openssh.com,hmac-ripemd160,hmac-ripemd160(a)openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit:
hmac-md5,hmac-sha1,umac-64@openssh.com,hmac-ripemd160,hmac-ripemd160(a)openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,zlib(a)openssh.com
debug2: kex_parse_kexinit: none,zlib(a)openssh.com
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: mac_setup: found hmac-md5
debug1: kex: server->client aes128-ctr hmac-md5 none
debug2: mac_setup: found hmac-md5
debug1: kex: client->server aes128-ctr hmac-md5 none
debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
debug3: Wrote 24 bytes for a total of 837
debug2: dh_gen_key: priv key bits set: 144/256
debug2: bits set: 508/1024
debug1: SSH2_MSG_KEX_DH_GEX_INIT sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY
debug3: Wrote 144 bytes for a total of 981
debug3: check_host_in_hostfile: filename /root/.ssh/known_hosts
debug3: check_host_in_hostfile: match line 2
debug1: Host 'localhost' is known and matches the RSA host key.
debug1: Found key in /root/.ssh/known_hosts:2
debug2: bits set: 528/1024
debug1: ssh_rsa_verify: signature correct
debug2: kex_derive_keys
debug2: set_newkeys: mode 1
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug3: Wrote 16 bytes for a total of 997
debug2: set_newkeys: mode 0
debug1: SSH2_MSG_NEWKEYS received
debug1: SSH2_MSG_SERVICE_REQUEST sent
debug3: Wrote 48 bytes for a total of 1045
debug2: service_accept: ssh-userauth
debug1: SSH2_MSG_SERVICE_ACCEPT received
debug2: key: /root/.ssh/identity ((nil))
debug2: key: /root/.ssh/id_rsa ((nil))
debug2: key: /root/.ssh/id_dsa ((nil))
debug3: Wrote 64 bytes for a total of 1109
debug1: Authentications that can continue: publickey,password
debug3: start over, passed a different list publickey,password
debug3: preferred
gssapi-keyex,gssapi-with-mic,publickey,keyboard-interactive,password
debug3: authmethod_lookup publickey
debug3: remaining preferred: keyboard-interactive,password
debug3: authmethod_is_enabled publickey
debug1: Next authentication method: publickey
debug1: Trying private key: /root/.ssh/identity
debug3: no such identity: /root/.ssh/identity
debug1: Trying private key: /root/.ssh/id_rsa
debug3: no such identity: /root/.ssh/id_rsa
debug1: Trying private key: /root/.ssh/id_dsa
debug3: no such identity: /root/.ssh/id_dsa
debug2: we did not send a packet, disable method
debug3: authmethod_lookup password
debug3: remaining preferred: ,password
debug3: authmethod_is_enabled password
debug1: Next authentication method: password
root@localhost's password:
debug3: packet_send2: adding 64 (len 59 padlen 5 extra_pad 64)
debug2: we sent a password packet, wait for reply
debug3: Wrote 144 bytes for a total of 1253
debug1: Authentication succeeded (password).
debug1: channel 0: new [client-session]
debug3: ssh_session2_open: channel_new: 0
debug2: channel 0: send open
debug1: Requesting no-more-sessions(a)openssh.com
debug1: Entering interactive session.
debug3: Wrote 128 bytes for a total of 1381
debug3: Wrote -1 bytes for a total of 1381
Write failed: Broken pipe
-------------------------------------------
it accepts my log in, but fails after that.
any clues?
So i've tried many fixes that I have found in association with the
broken pipe error. changing limits.conf, and keep serveralive,
clientalive. all of that didnt affect it. The home directory is set
for the user im trying to ssh into.
no related activity in /var/log/messages or secure.
I've tried this on multiple hosts. i can ssh to the host just fine,
and console into the container.
still stuck. any suggestions appreciated.
4279
days inactive
4285
days old
3 comments
1 participants
participants (1)
-
Brandon Foster