10:30 p.m.
Hi,
I was trying to add volume...I got one xml snippet and I modified it
according to my node configuration:
< volume>
<name>testNode/cluster.vmdk </name>
<allocation>0 </allocation>
<capacity unit='G'>2<capacity>
</volume>
Now when I executed "virsh vol-create datastore1 /local/new_volume.xml" one
error message came saying:
"Error: Failed to create volume from /local/new_volume.xml"
Error: internal error: Creation of raw volumes is not supported"
Can anyone tell me what is going wrong here?
Regards,
Varun
10:57 p.m.
On 08/15/2013 08:30 AM, varun bhatnagar wrote:
Hi,
I was trying to add volume...I got one xml snippet and I modified it
according to my node configuration:
< volume>
<name>testNode/cluster.vmdk </name>
<allocation>0 </allocation>
<capacity unit='G'>2<capacity>
</volume>
Now when I executed "virsh vol-create datastore1 /local/new_volume.xml" one
error message came saying:
"Error: Failed to create volume from /local/new_volume.xml"
Error: internal error: Creation of raw volumes is not supported"
What type of pool are you trying to add this volume to? This may be a
case of no one having implemented the volume creation for your
particular pool backend yet.
--
Eric Blake eblake redhat com +1-919-301-3266
Libvirt virtualization library http://libvirt.org
11:36 p.m.
I am trying to add this volume to ESX pool. I have ESX server and got
connected to it. When I listed the pool the data store of ESX server was
getting listed down. So I was adding this volume to that.
I want to create a domain but for that Matthias replied that I have to add
volume which will put my .vmdk fole there.
On 15 Aug 2013 20:27, "Eric Blake" <eblake(a)redhat.com> wrote:
On 08/15/2013 08:30 AM, varun bhatnagar wrote:
> Hi,
>
> I was trying to add volume...I got one xml snippet and I modified it
> according to my node configuration:
>
> < volume>
> <name>testNode/cluster.vmdk </name>
> <allocation>0 </allocation>
> <capacity unit='G'>2<capacity>
> </volume>
>
> Now when I executed "virsh vol-create datastore1 /local/new_volume.xml"
one
> error message came saying:
>
> "Error: Failed to create volume from /local/new_volume.xml"
> Error: internal error: Creation of raw volumes is not supported"
What type of pool are you trying to add this volume to? This may be a
case of no one having implemented the volume creation for your
particular pool backend yet.
--
Eric Blake eblake redhat com +1-919-301-3266
Libvirt virtualization library http://libvirt.org
11 p.m.
2013/8/15 varun bhatnagar <varun292006(a)gmail.com>:
Hi,
I was trying to add volume...I got one xml snippet and I modified it
according to my node configuration:
< volume>
<name>testNode/cluster.vmdk </name>
<allocation>0 </allocation>
<capacity unit='G'>2<capacity>
</volume>
Now when I executed "virsh vol-create datastore1 /local/new_volume.xml" one
error message came saying:
"Error: Failed to create volume from /local/new_volume.xml"
Error: internal error: Creation of raw volumes is not supported"
Can anyone tell me what is going wrong here?
virsh vol-create without -c option might connecto to the wrong
hypervisor. Try specifing the connection uri.
--
Matthias Bolte
http://photron.blogspot.com
11:38 p.m.
Yes Matthias I am connecting to ESX uri first and then I am adding volume
to my ESX data store.
On 15 Aug 2013 20:30, "Matthias Bolte" <matthias.bolte(a)googlemail.com>
wrote:
2013/8/15 varun bhatnagar <varun292006(a)gmail.com>:
> Hi,
>
> I was trying to add volume...I got one xml snippet and I modified it
> according to my node configuration:
>
> < volume>
> <name>testNode/cluster.vmdk </name>
> <allocation>0 </allocation>
> <capacity unit='G'>2<capacity>
> </volume>
>
> Now when I executed "virsh vol-create datastore1 /local/new_volume.xml"
one
> error message came saying:
>
> "Error: Failed to create volume from /local/new_volume.xml"
> Error: internal error: Creation of raw volumes is not supported"
>
> Can anyone tell me what is going wrong here?
virsh vol-create without -c option might connecto to the wrong
hypervisor. Try specifing the connection uri.
--
Matthias Bolte
http://photron.blogspot.com
11:46 p.m.
On 08/15/2013 04:30 PM, varun bhatnagar wrote:
Hi,
I was trying to add volume...I got one xml snippet and I modified it according
to my node configuration:
Hi,
could you try specifying the format as well?
< volume>
<name>testNode/cluster.vmdk </name>
<allocation>0 </allocation>
<capacity unit='G'>2<capacity>
<target>
<format type='vmdk'>
</target>
</volume>
Jan
2:13 p.m.
Hi Ján,
Thanks a lot for the suggestion. It worked and volume is added to the
datastore. Now if I try to start the node it gives an error saying:
Error: internal error: Could not start domain: FileNotFound - File
[datastore1] testNode/cluster.vmdk was not found."
But .vmdk file exist at this location. What is going wrong here can anyobe
plz suggest. Below is my xml:
<domain type='vmware'>
<name>testNode</name>
<uuid>50115e16-9bdc-49d7-f171-53c4d7f91710</uuid>
<memory>1048576</memory>
<currentMemory>1048576</currentMemory>
<vcpu>1</vcpu>
<os>
<type arch='x86_64'>hvm</type>
</os>
<devices>
<disk type='file' device='disk'>
<source file='[datastore1] testNode/cluster.vmdk'/>
<target dev='sda' bus='scsi'/>
<address type='drive' controller='0' bus='0'
unit='0'/>
</disk>
<controller type='scsi' index='0'/>
<interface type='bridge'>
<mac address='00:50:56:25:48:c7'/>
<source bridge='VM Network'/>
</interface>
</devices>
</domain>
On 15 Aug 2013 21:16, "Ján Tomko" <jtomko(a)redhat.com> wrote:
On 08/15/2013 04:30 PM, varun bhatnagar wrote:
> Hi,
>
> I was trying to add volume...I got one xml snippet and I modified it
according
> to my node configuration:
Hi,
could you try specifying the format as well?
>
> < volume>
> <name>testNode/cluster.vmdk </name>
> <allocation>0 </allocation>
> <capacity unit='G'>2<capacity>
<target>
<format type='vmdk'>
</target>
> </volume>
Jan
2:59 p.m.
Hi,
The below error got resolved.
Now while starting my esx domain I got the following error:
"Error: internal error: Could not start domain: GenericVmConfigFault -
Failed to start the virtual machine. "
Is this a bug?
Regards,
Varun
On 16 Aug 2013 11:43, "varun bhatnagar" <varun292006(a)gmail.com> wrote:
Hi Ján,
Thanks a lot for the suggestion. It worked and volume is added to the
datastore. Now if I try to start the node it gives an error saying:
Error: internal error: Could not start domain: FileNotFound - File
[datastore1] testNode/cluster.vmdk was not found."
But .vmdk file exist at this location. What is going wrong here can anyobe
plz suggest. Below is my xml:
<domain type='vmware'>
<name>testNode</name>
<uuid>50115e16-9bdc-49d7-f171-53c4d7f91710</uuid>
<memory>1048576</memory>
<currentMemory>1048576</currentMemory>
<vcpu>1</vcpu>
<os>
<type arch='x86_64'>hvm</type>
</os>
<devices>
<disk type='file' device='disk'>
<source file='[datastore1] testNode/cluster.vmdk'/>
<target dev='sda' bus='scsi'/>
<address type='drive' controller='0' bus='0'
unit='0'/>
</disk>
<controller type='scsi' index='0'/>
<interface type='bridge'>
<mac address='00:50:56:25:48:c7'/>
<source bridge='VM Network'/>
</interface>
</devices>
</domain>
On 15 Aug 2013 21:16, "Ján Tomko" <jtomko(a)redhat.com> wrote:
> On 08/15/2013 04:30 PM, varun bhatnagar wrote:
> > Hi,
> >
> > I was trying to add volume...I got one xml snippet and I modified it
> according
> > to my node configuration:
>
> Hi,
>
> could you try specifying the format as well?
>
> >
> > < volume>
> > <name>testNode/cluster.vmdk </name>
> > <allocation>0 </allocation>
> > <capacity unit='G'>2<capacity>
>
> <target>
> <format type='vmdk'>
> </target>
>
> > </volume>
>
> Jan
>
>
4097
days inactive
4098
days old
7 comments
4 participants
participants (4)
-
Eric Blake -
Ján Tomko -
Matthias Bolte -
varun bhatnagar