[libvirt] Unable to make libvirt
Hi, I am unable to compile libvirt -0.9.13 1. ./configure (Executed successfully without any errors) 2. While executing make I am getting following Error /bin/sed: can't read =/usr/lib/libnl-route.la: No such file or directory libtool: link: `=/usr/lib/libnl-route.la' is not a valid libtool archive make[3]: *** [libvirt.la] Error 1 make[3]: Leaving directory `/home/root/libvirt-0.9.13/src' make[2]: *** [all] Error 2 make[2]: Leaving directory `/home/root/libvirt-0.9.13/src' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/home/root/libvirt-0.9.13' make: *** [all] Error 2 But "=/usr/lib/libnl-route.la" file exist Please help me regarding this. Regards, Veera.
On 07/11/2012 06:52 AM, B Veera-B37207 wrote:
Hi,
I am unable to compile libvirt -0.9.13
1. ./configure (Executed successfully without any errors)
2. While executing make I am getting following Error
/bin/sed: can't read =/usr/lib/libnl-route.la: No such file or directory
That's an odd file name. Something went wrong to botch libtool up that badly. What platform are you compiling on? Can you show the error is you repeat things with 'make V=1' to get a more complete command line that was being attempted prior to the error? -- Eric Blake eblake@redhat.com +1-919-301-3266 Libvirt virtualization library http://libvirt.org
Hi Eric, I am compiling on "Power PC" Architecture Board. As you said I compiled with 'make V=1' , Output file is attached with this mail. Regards, Veera. -----Original Message----- From: Eric Blake [mailto:eblake@redhat.com] Sent: Wednesday, July 11, 2012 8:00 PM To: B Veera-B37207 Cc: libvir-list@redhat.com Subject: Re: [libvirt] Unable to make libvirt On 07/11/2012 06:52 AM, B Veera-B37207 wrote:
Hi,
I am unable to compile libvirt -0.9.13
1. ./configure (Executed successfully without any errors)
2. While executing make I am getting following Error
/bin/sed: can't read =/usr/lib/libnl-route.la: No such file or directory
That's an odd file name. Something went wrong to botch libtool up that badly. What platform are you compiling on? Can you show the error is you repeat things with 'make V=1' to get a more complete command line that was being attempted prior to the error? -- Eric Blake eblake@redhat.com +1-919-301-3266 Libvirt virtualization library http://libvirt.org
Hi, Platform : Power PC When I am doing make V=1 libtool: link: gcc -std=gnu99 -shared -fPIC -DPIC -Wl,--whole-archive ./.libs/libvirt_util.a ./.libs/libvirt_conf.a ./.libs/libvirt_cpu.a ./.libs/libvirt_v mx.a ./.libs/libvirt_driver.a ./.libs/libvirt_driver_test.a ./.libs/libvirt_driver_remote.a ./.libs/libvirt_driver_openvz.a ./.libs/libvirt_driver_vmware.a . /.libs/libvirt_driver_vbox.a ./.libs/libvirt_driver_security.a ../gnulib/lib/.libs/libgnu.a -Wl,--no-whole-archive /usr/lib/libnl-genl.so -L/usr/lib /usr/li b/libnl-nf.so /usr/lib/libnl-route.so /usr/lib/libnl.so -ldevmapper /usr/lib/libdbus-1.so -lrt -L=/usr/lib /usr/lib/libgnutls.so /usr/lib/libtasn1.so /usr/li b/libgcrypt.so /usr/lib/libgpg-error.so -lcap -lpthread -lutil /usr/lib/libxml2.so /usr/lib/libz.so -lm -ldl -O2 -Wl,--version-script=libvirt.syms -Wl,-z -W l,nodelete -Wl,-soname -Wl,libvirt.so.0 -o .libs/libvirt.so.0.9.13 libtool: link: (cd ".libs" && rm -f "libvirt.so.0" && ln -s "libvirt.so.0.9.13" "libvirt.so.0") libtool: link: (cd ".libs" && rm -f "libvirt.so" && ln -s "libvirt.so.0.9.13" "libvirt.so") libtool: link: (cd .libs/libvirt.lax/libvirt_util.a && ar x "/home/root/libvirt-0.9.13/src/./.libs/libvirt_util.a") libtool: link: (cd .libs/libvirt.lax/libvirt_conf.a && ar x "/home/root/libvirt-0.9.13/src/./.libs/libvirt_conf.a") libtool: link: (cd .libs/libvirt.lax/libvirt_cpu.a && ar x "/home/root/libvirt-0.9.13/src/./.libs/libvirt_cpu.a") libtool: link: (cd .libs/libvirt.lax/libvirt_vmx.a && ar x "/home/root/libvirt-0.9.13/src/./.libs/libvirt_vmx.a") libtool: link: (cd .libs/libvirt.lax/libvirt_driver.a && ar x "/home/root/libvirt-0.9.13/src/./.libs/libvirt_driver.a") libtool: link: (cd .libs/libvirt.lax/libvirt_driver_test.a && ar x "/home/root/libvirt-0.9.13/src/./.libs/libvirt_driver_test.a") libtool: link: (cd .libs/libvirt.lax/libvirt_driver_remote.a && ar x "/home/root/libvirt-0.9.13/src/./.libs/libvirt_driver_remote.a") libtool: link: (cd .libs/libvirt.lax/libvirt_driver_openvz.a && ar x "/home/root/libvirt-0.9.13/src/./.libs/libvirt_driver_openvz.a") libtool: link: (cd .libs/libvirt.lax/libvirt_driver_vmware.a && ar x "/home/root/libvirt-0.9.13/src/./.libs/libvirt_driver_vmware.a") libtool: link: (cd .libs/libvirt.lax/libvirt_driver_vbox.a && ar x "/home/root/libvirt-0.9.13/src/./.libs/libvirt_driver_vbox.a") libtool: link: (cd .libs/libvirt.lax/libvirt_driver_security.a && ar x "/home/root/libvirt-0.9.13/src/./.libs/libvirt_driver_security.a") libtool: link: (cd .libs/libvirt.lax/libgnu.a && ar x "/home/root/libvirt-0.9.13/src/../gnulib/lib/.libs/libgnu.a") libtool: link: ar cru .libs/libvirt.a @.libs/libvirt.libcmd libtool: link: ranlib .libs/libvirt.a libtool: link: rm -fr .libs/libvirt.lax /bin/sed: can't read =/usr/lib/libnl-route.la: No such file or directory libtool: link: `=/usr/lib/libnl-route.la' is not a valid libtool archive make[3]: *** [libvirt.la] Error 1 make[3]: Leaving directory `/home/root/libvirt-0.9.13/src' make[2]: *** [all] Error 2 make[2]: Leaving directory `/home/root/libvirt-0.9.13/src' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/home/root/libvirt-0.9.13' make: *** [all] Error 2 Regards, Veera -----Original Message----- From: Eric Blake [mailto:eblake@redhat.com] Sent: Wednesday, July 11, 2012 8:00 PM To: B Veera-B37207 Cc: libvir-list@redhat.com Subject: Re: [libvirt] Unable to make libvirt On 07/11/2012 06:52 AM, B Veera-B37207 wrote:
Hi,
I am unable to compile libvirt -0.9.13
1. ./configure (Executed successfully without any errors)
2. While executing make I am getting following Error
/bin/sed: can't read =/usr/lib/libnl-route.la: No such file or directory
That's an odd file name. Something went wrong to botch libtool up that badly. What platform are you compiling on? Can you show the error is you repeat things with 'make V=1' to get a more complete command line that was being attempted prior to the error? -- Eric Blake eblake@redhat.com +1-919-301-3266 Libvirt virtualization library http://libvirt.org
Hi, Platform : Power PC When I am doing make V=1 libtool: link: gcc -std=gnu99 -shared -fPIC -DPIC -Wl,--whole-archive ./.libs/libvirt_util.a ./.libs/libvirt_conf.a ./.libs/libvirt_cpu.a ./.libs/libvirt_v mx.a ./.libs/libvirt_driver.a ./.libs/libvirt_driver_test.a ./.libs/libvirt_driver_remote.a ./.libs/libvirt_driver_openvz.a ./.libs/libvirt_driver_vmware.a . /.libs/libvirt_driver_vbox.a ./.libs/libvirt_driver_security.a ../gnulib/lib/.libs/libgnu.a -Wl,--no-whole-archive /usr/lib/libnl-genl.so -L/usr/lib /usr/li b/libnl-nf.so /usr/lib/libnl-route.so /usr/lib/libnl.so -ldevmapper /usr/lib/libdbus-1.so -lrt -L=/usr/lib /usr/lib/libgnutls.so /usr/lib/libtasn1.so /usr/li b/libgcrypt.so /usr/lib/libgpg-error.so -lcap -lpthread -lutil /usr/lib/libxml2.so /usr/lib/libz.so -lm -ldl -O2 -Wl,--version-script=libvirt.syms -Wl,-z -W l,nodelete -Wl,-soname -Wl,libvirt.so.0 -o .libs/libvirt.so.0.9.13 libtool: link: (cd ".libs" && rm -f "libvirt.so.0" && ln -s "libvirt.so.0.9.13" "libvirt.so.0") libtool: link: (cd ".libs" && rm -f "libvirt.so" && ln -s "libvirt.so.0.9.13" "libvirt.so") libtool: link: (cd .libs/libvirt.lax/libvirt_util.a && ar x "/home/root/libvirt-0.9.13/src/./.libs/libvirt_util.a") libtool: link: (cd .libs/libvirt.lax/libvirt_conf.a && ar x "/home/root/libvirt-0.9.13/src/./.libs/libvirt_conf.a") libtool: link: (cd .libs/libvirt.lax/libvirt_cpu.a && ar x "/home/root/libvirt-0.9.13/src/./.libs/libvirt_cpu.a") libtool: link: (cd .libs/libvirt.lax/libvirt_vmx.a && ar x "/home/root/libvirt-0.9.13/src/./.libs/libvirt_vmx.a") libtool: link: (cd .libs/libvirt.lax/libvirt_driver.a && ar x "/home/root/libvirt-0.9.13/src/./.libs/libvirt_driver.a") libtool: link: (cd .libs/libvirt.lax/libvirt_driver_test.a && ar x "/home/root/libvirt-0.9.13/src/./.libs/libvirt_driver_test.a") libtool: link: (cd .libs/libvirt.lax/libvirt_driver_remote.a && ar x "/home/root/libvirt-0.9.13/src/./.libs/libvirt_driver_remote.a") libtool: link: (cd .libs/libvirt.lax/libvirt_driver_openvz.a && ar x "/home/root/libvirt-0.9.13/src/./.libs/libvirt_driver_openvz.a") libtool: link: (cd .libs/libvirt.lax/libvirt_driver_vmware.a && ar x "/home/root/libvirt-0.9.13/src/./.libs/libvirt_driver_vmware.a") libtool: link: (cd .libs/libvirt.lax/libvirt_driver_vbox.a && ar x "/home/root/libvirt-0.9.13/src/./.libs/libvirt_driver_vbox.a") libtool: link: (cd .libs/libvirt.lax/libvirt_driver_security.a && ar x "/home/root/libvirt-0.9.13/src/./.libs/libvirt_driver_security.a") libtool: link: (cd .libs/libvirt.lax/libgnu.a && ar x "/home/root/libvirt-0.9.13/src/../gnulib/lib/.libs/libgnu.a") libtool: link: ar cru .libs/libvirt.a @.libs/libvirt.libcmd libtool: link: ranlib .libs/libvirt.a libtool: link: rm -fr .libs/libvirt.lax /bin/sed: can't read =/usr/lib/libnl-route.la: No such file or directory libtool: link: `=/usr/lib/libnl-route.la' is not a valid libtool archive make[3]: *** [libvirt.la] Error 1 make[3]: Leaving directory `/home/root/libvirt-0.9.13/src' make[2]: *** [all] Error 2 make[2]: Leaving directory `/home/root/libvirt-0.9.13/src' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/home/root/libvirt-0.9.13' make: *** [all] Error 2 Regards, Veera -----Original Message----- From: Eric Blake [mailto:eblake@redhat.com] Sent: Wednesday, July 11, 2012 8:00 PM To: B Veera-B37207 Cc: libvir-list@redhat.com Subject: Re: [libvirt] Unable to make libvirt On 07/11/2012 06:52 AM, B Veera-B37207 wrote:
Hi,
I am unable to compile libvirt -0.9.13
1. ./configure (Executed successfully without any errors)
2. While executing make I am getting following Error
/bin/sed: can't read =/usr/lib/libnl-route.la: No such file or directory
That's an odd file name. Something went wrong to botch libtool up that badly. What platform are you compiling on? Can you show the error is you repeat things with 'make V=1' to get a more complete command line that was being attempted prior to the error? -- Eric Blake eblake@redhat.com +1-919-301-3266 Libvirt virtualization library http://libvirt.org
On Wed, Jul 11, 2012 at 08:29:44AM -0600, Eric Blake wrote:
On 07/11/2012 06:52 AM, B Veera-B37207 wrote:
Hi,
I am unable to compile libvirt -0.9.13
1. ./configure (Executed successfully without any errors)
2. While executing make I am getting following Error
/bin/sed: can't read =/usr/lib/libnl-route.la: No such file or directory
That's an odd file name. Something went wrong to botch libtool up that badly. What platform are you compiling on? Can you show the error is you repeat things with 'make V=1' to get a more complete command line that was being attempted prior to the error?
I expect that either some pkgconfig script was broken, or bad arguments were passed to configure. What args did you run 'configure' with ? And can you provide the configure output summary Daniel -- |: http://berrange.com -o- http://www.flickr.com/photos/dberrange/ :| |: http://libvirt.org -o- http://virt-manager.org :| |: http://autobuild.org -o- http://search.cpan.org/~danberr/ :| |: http://entangle-photo.org -o- http://live.gnome.org/gtk-vnc :|
participants (3)
-
B Veera-B37207 -
Daniel P. Berrange -
Eric Blake