The "-balloon" option has been replaced by "-device virtio-balloon". It's been marked as deprecated since two releases, and nobody complained, so let's remove it now. Signed-off-by: Thomas Huth <thuth(a)redhat.com&gt; --- docs/virtio-balloon-stats.txt | 6 +++--- qemu-deprecated.texi | 5 ----- qemu-options.hx | 10 ---------- vl.c | 36 ------------------------------------ 4 files changed, 3 insertions(+), 54 deletions(-) diff --git a/docs/virtio-balloon-stats.txt b/docs/virtio-balloon-stats.txt index 9985e1d..1732cc8 100644 --- a/docs/virtio-balloon-stats.txt +++ b/docs/virtio-balloon-stats.txt @@ -61,9 +61,9 @@ It's also important to note the following: respond to the request the timer will never be re-armed, which has the same effect as disabling polling -Here are a few examples. QEMU is started with '-balloon virtio', which -generates '/machine/peripheral-anon/device[1]' as the QOM path for the -balloon device. +Here are a few examples. QEMU is started with '-device virtio-balloon', +which generates '/machine/peripheral-anon/device[1]' as the QOM path for +the balloon device. Enable polling with 2 seconds interval: diff --git a/qemu-deprecated.texi b/qemu-deprecated.texi index 67b7211..0714017 100644 --- a/qemu-deprecated.texi +++ b/qemu-deprecated.texi @@ -106,11 +106,6 @@ enabled via the ``-machine usb=on'' argument. The ``-nodefconfig`` argument is a synonym for ``-no-user-config``. -@subsection -balloon (since 2.12.0) - -The @option{--balloon virtio} argument has been superseded by -@option{--device virtio-balloon}. - @subsection -fsdev handle (since 2.12.0) The ``handle'' fsdev backend does not support symlinks and causes the 9p diff --git a/qemu-options.hx b/qemu-options.hx index 4efdedf..47c6b92 100644 --- a/qemu-options.hx +++ b/qemu-options.hx @@ -454,16 +454,6 @@ modprobe i810_audio clocking=48000 @end example ETEXI -DEF("balloon", HAS_ARG, QEMU_OPTION_balloon, - "-balloon virtio[,addr=str]\n" - " enable virtio balloon device (deprecated)\n", QEMU_ARCH_ALL) -STEXI -@item -balloon virtio[,addr=@var{addr}] -@findex -balloon -Enable virtio balloon device, optionally with PCI address @var{addr}. This -option is deprecated, use @option{-device virtio-balloon} instead. -ETEXI - DEF("device", HAS_ARG, QEMU_OPTION_device, "-device driver[,prop[=value][,...]]\n" " add device (based on driver)\n" diff --git a/vl.c b/vl.c index 16b913f..f952f01 100644 --- a/vl.c +++ b/vl.c @@ -2127,36 +2127,6 @@ static void parse_display(const char *p) } } -static int balloon_parse(const char *arg) -{ - QemuOpts *opts; - - warn_report("This option is deprecated. " - "Use '--device virtio-balloon' to enable the balloon device."); - - if (strcmp(arg, "none") == 0) { - return 0; - } - - if (!strncmp(arg, "virtio", 6)) { - if (arg[6] == ',') { - /* have params -> parse them */ - opts = qemu_opts_parse_noisily(qemu_find_opts("device"), arg + 7, - false); - if (!opts) - return -1; - } else { - /* create empty opts */ - opts = qemu_opts_create(qemu_find_opts("device"), NULL, 0, - &error_abort); - } - qemu_opt_set(opts, "driver", "virtio-balloon", &error_abort); - return 0; - } - - return -1; -} - char *qemu_find_file(int type, const char *name) { int i; @@ -3659,12 +3629,6 @@ int main(int argc, char **argv, char **envp) case QEMU_OPTION_no_hpet: no_hpet = 1; break; - case QEMU_OPTION_balloon: - if (balloon_parse(optarg) < 0) { - error_report("unknown -balloon argument %s", optarg); - exit(1); - } - break; case QEMU_OPTION_no_reboot: no_reboot = 1; break;

The "-balloon" option has been replaced by "-device virtio-balloon". It's been marked as deprecated since two releases, and nobody complained, so let's remove it now. Signed-off-by: Thomas Huth <thuth(a)redhat.com&gt;

--- docs/virtio-balloon-stats.txt | 6 +++--- qemu-deprecated.texi | 5 ----- qemu-options.hx | 10 ---------- vl.c | 36 ------------------------------------ 4 files changed, 3 insertions(+), 54 deletions(-) diff --git a/docs/virtio-balloon-stats.txt b/docs/virtio-balloon-stats.txt index 9985e1d..1732cc8 100644 --- a/docs/virtio-balloon-stats.txt +++ b/docs/virtio-balloon-stats.txt @@ -61,9 +61,9 @@ It's also important to note the following: respond to the request the timer will never be re-armed, which has the same effect as disabling polling -Here are a few examples. QEMU is started with '-balloon virtio', which -generates '/machine/peripheral-anon/device[1]' as the QOM path for the -balloon device. +Here are a few examples. QEMU is started with '-device virtio-balloon', +which generates '/machine/peripheral-anon/device[1]' as the QOM path for +the balloon device. Enable polling with 2 seconds interval: diff --git a/qemu-deprecated.texi b/qemu-deprecated.texi index 67b7211..0714017 100644 --- a/qemu-deprecated.texi +++ b/qemu-deprecated.texi @@ -106,11 +106,6 @@ enabled via the ``-machine usb=on'' argument. The ``-nodefconfig`` argument is a synonym for ``-no-user-config``. -@subsection -balloon (since 2.12.0) - -The @option{--balloon virtio} argument has been superseded by -@option{--device virtio-balloon}. - @subsection -fsdev handle (since 2.12.0) The ``handle'' fsdev backend does not support symlinks and causes the 9p diff --git a/qemu-options.hx b/qemu-options.hx index 4efdedf..47c6b92 100644 --- a/qemu-options.hx +++ b/qemu-options.hx @@ -454,16 +454,6 @@ modprobe i810_audio clocking=48000 @end example ETEXI -DEF("balloon", HAS_ARG, QEMU_OPTION_balloon, - "-balloon virtio[,addr=str]\n" - " enable virtio balloon device (deprecated)\n", QEMU_ARCH_ALL) -STEXI -@item -balloon virtio[,addr=@var{addr}] -@findex -balloon -Enable virtio balloon device, optionally with PCI address @var{addr}. This -option is deprecated, use @option{-device virtio-balloon} instead. -ETEXI - DEF("device", HAS_ARG, QEMU_OPTION_device, "-device driver[,prop[=value][,...]]\n" " add device (based on driver)\n" diff --git a/vl.c b/vl.c index 16b913f..f952f01 100644 --- a/vl.c +++ b/vl.c @@ -2127,36 +2127,6 @@ static void parse_display(const char *p) } } -static int balloon_parse(const char *arg) -{ - QemuOpts *opts; - - warn_report("This option is deprecated. " - "Use '--device virtio-balloon' to enable the balloon device."); - - if (strcmp(arg, "none") == 0) { - return 0; - } - - if (!strncmp(arg, "virtio", 6)) { - if (arg[6] == ',') { - /* have params -> parse them */ - opts = qemu_opts_parse_noisily(qemu_find_opts("device"), arg + 7, - false); - if (!opts) - return -1; - } else { - /* create empty opts */ - opts = qemu_opts_create(qemu_find_opts("device"), NULL, 0, - &error_abort); - } - qemu_opt_set(opts, "driver", "virtio-balloon", &error_abort); - return 0; - } - - return -1; -} - char *qemu_find_file(int type, const char *name) { int i; @@ -3659,12 +3629,6 @@ int main(int argc, char **argv, char **envp) case QEMU_OPTION_no_hpet: no_hpet = 1; break; - case QEMU_OPTION_balloon: - if (balloon_parse(optarg) < 0) { - error_report("unknown -balloon argument %s", optarg); - exit(1); - } - break; case QEMU_OPTION_no_reboot: no_reboot = 1; break; -- 1.8.3.1