Change qemu driver to use hostdev common library instead of APIs in qemu_hostdev.[ch] Signed-off-by: Chunyan Liu <cyliu@suse.com> --- po/POTFILES.in | 1 - src/Makefile.am | 1 - src/qemu/qemu_command.c | 1 - src/qemu/qemu_conf.h | 9 +- src/qemu/qemu_driver.c | 72 +--- src/qemu/qemu_hostdev.c | 1289 ----------------------------------------------- src/qemu/qemu_hostdev.h | 72 --- src/qemu/qemu_hotplug.c | 126 ++--- src/qemu/qemu_process.c | 34 +- 9 files changed, 87 insertions(+), 1518 deletions(-) delete mode 100644 src/qemu/qemu_hostdev.c delete mode 100644 src/qemu/qemu_hostdev.h diff --git a/po/POTFILES.in b/po/POTFILES.in index d01cb99..2fc7e67 100644 --- a/po/POTFILES.in +++ b/po/POTFILES.in @@ -99,7 +99,6 @@ src/qemu/qemu_command.c src/qemu/qemu_conf.c src/qemu/qemu_domain.c src/qemu/qemu_driver.c -src/qemu/qemu_hostdev.c src/qemu/qemu_hotplug.c src/qemu/qemu_migration.c src/qemu/qemu_monitor.c diff --git a/src/Makefile.am b/src/Makefile.am index e563960..c3a8ba0 100644 --- a/src/Makefile.am +++ b/src/Makefile.am @@ -654,7 +654,6 @@ QEMU_DRIVER_SOURCES = \ qemu/qemu_command.c qemu/qemu_command.h \ qemu/qemu_domain.c qemu/qemu_domain.h \ qemu/qemu_cgroup.c qemu/qemu_cgroup.h \ - qemu/qemu_hostdev.c qemu/qemu_hostdev.h \ qemu/qemu_hotplug.c qemu/qemu_hotplug.h \ qemu/qemu_hotplugpriv.h \ qemu/qemu_conf.c qemu/qemu_conf.h \ diff --git a/src/qemu/qemu_command.c b/src/qemu/qemu_command.c index 1521431..3abb88d 100644 --- a/src/qemu/qemu_command.c +++ b/src/qemu/qemu_command.c @@ -24,7 +24,6 @@ #include <config.h> #include "qemu_command.h" -#include "qemu_hostdev.h" #include "qemu_capabilities.h" #include "qemu_bridge_filter.h" #include "cpu/cpu.h" diff --git a/src/qemu/qemu_conf.h b/src/qemu/qemu_conf.h index 206f2c6..97c8501 100644 --- a/src/qemu/qemu_conf.h +++ b/src/qemu/qemu_conf.h @@ -52,6 +52,7 @@ # error "Port me" # endif +# define QEMU_DRIVER_NAME "QEMU" typedef struct _virQEMUDriver virQEMUDriver; typedef virQEMUDriver *virQEMUDriverPtr; @@ -204,14 +205,6 @@ struct _virQEMUDriver { /* Immutable pointer. self-locking APIs */ virSecurityManagerPtr securityManager; - /* Immutable pointers. Requires locks to be held before - * calling APIs. activePciHostdevs must be locked before - * inactivePciHostdevs */ - virPCIDeviceListPtr activePciHostdevs; - virPCIDeviceListPtr inactivePciHostdevs; - virUSBDeviceListPtr activeUsbHostdevs; - virSCSIDeviceListPtr activeScsiHostdevs; - /* Immutable pointer. Unsafe APIs. XXX */ virHashTablePtr sharedDevices; diff --git a/src/qemu/qemu_driver.c b/src/qemu/qemu_driver.c index bbf2d23..b289a30 100644 --- a/src/qemu/qemu_driver.c +++ b/src/qemu/qemu_driver.c @@ -50,7 +50,6 @@ #include "qemu_capabilities.h" #include "qemu_command.h" #include "qemu_cgroup.h" -#include "qemu_hostdev.h" #include "qemu_hotplug.h" #include "qemu_monitor.h" #include "qemu_bridge_filter.h" @@ -94,11 +93,10 @@ #include "virstring.h" #include "viraccessapicheck.h" #include "viraccessapicheckqemu.h" +#include "virhostdev.h" #define VIR_FROM_THIS VIR_FROM_QEMU -#define QEMU_DRIVER_NAME "QEMU" - #define QEMU_NB_MEM_PARAM 3 #define QEMU_NB_BLOCK_IO_TUNE_PARAM 6 @@ -691,18 +689,6 @@ qemuStateInitialize(bool privileged, if (qemuSecurityInit(qemu_driver) < 0) goto error; - if ((qemu_driver->activePciHostdevs = virPCIDeviceListNew()) == NULL) - goto error; - - if ((qemu_driver->activeUsbHostdevs = virUSBDeviceListNew()) == NULL) - goto error; - - if ((qemu_driver->inactivePciHostdevs = virPCIDeviceListNew()) == NULL) - goto error; - - if ((qemu_driver->activeScsiHostdevs = virSCSIDeviceListNew()) == NULL) - goto error; - if (!(qemu_driver->sharedDevices = virHashCreate(30, qemuSharedDeviceEntryFree))) goto error; @@ -983,9 +969,6 @@ qemuStateCleanup(void) { virNWFilterUnRegisterCallbackDriver(&qemuCallbackDriver); virObjectUnref(qemu_driver->config); - virObjectUnref(qemu_driver->activePciHostdevs); - virObjectUnref(qemu_driver->inactivePciHostdevs); - virObjectUnref(qemu_driver->activeUsbHostdevs); virHashFree(qemu_driver->sharedDevices); virObjectUnref(qemu_driver->caps); virQEMUCapsCacheFree(qemu_driver->qemuCapsCache); @@ -10689,12 +10672,12 @@ qemuNodeDeviceDetachFlags(virNodeDevicePtr dev, const char *driverName, unsigned int flags) { - virQEMUDriverPtr driver = dev->conn->privateData; virPCIDevicePtr pci = NULL; unsigned domain = 0, bus = 0, slot = 0, function = 0; int ret = -1; virNodeDeviceDefPtr def = NULL; char *xml = NULL; + virHostdevManagerPtr hostdev_mgr; virCheckFlags(0, -1); @@ -10728,18 +10711,12 @@ qemuNodeDeviceDetachFlags(virNodeDevicePtr dev, goto cleanup; } - virObjectLock(driver->activePciHostdevs); - virObjectLock(driver->inactivePciHostdevs); - - if (virPCIDeviceDetach(pci, driver->activePciHostdevs, - driver->inactivePciHostdevs) < 0) { - goto out; + hostdev_mgr = virHostdevManagerGetDefault(); + if (virHostdevPciNodeDeviceDetach(hostdev_mgr, pci) < 0) { + goto cleanup; } ret = 0; -out: - virObjectUnlock(driver->inactivePciHostdevs); - virObjectUnlock(driver->activePciHostdevs); cleanup: virPCIDeviceFree(pci); virNodeDeviceDefFree(def); @@ -10756,13 +10733,12 @@ qemuNodeDeviceDettach(virNodeDevicePtr dev) static int qemuNodeDeviceReAttach(virNodeDevicePtr dev) { - virQEMUDriverPtr driver = dev->conn->privateData; virPCIDevicePtr pci = NULL; - virPCIDevicePtr other; unsigned domain = 0, bus = 0, slot = 0, function = 0; int ret = -1; virNodeDeviceDefPtr def = NULL; char *xml = NULL; + virHostdevManagerPtr hostdev_mgr; xml = virNodeDeviceGetXMLDesc(dev, 0); if (!xml) @@ -10782,33 +10758,12 @@ qemuNodeDeviceReAttach(virNodeDevicePtr dev) if (!pci) goto cleanup; - virObjectLock(driver->activePciHostdevs); - virObjectLock(driver->inactivePciHostdevs); - other = virPCIDeviceListFind(driver->activePciHostdevs, pci); - if (other) { - const char *other_name = virPCIDeviceGetUsedBy(other); - - if (other_name) - virReportError(VIR_ERR_OPERATION_INVALID, - _("PCI device %s is still in use by domain %s"), - virPCIDeviceGetName(pci), other_name); - else - virReportError(VIR_ERR_OPERATION_INVALID, - _("PCI device %s is still in use"), - virPCIDeviceGetName(pci)); - goto out; - } - - virPCIDeviceReattachInit(pci); - - if (virPCIDeviceReattach(pci, driver->activePciHostdevs, - driver->inactivePciHostdevs) < 0) + hostdev_mgr = virHostdevManagerGetDefault(); + if (virHostdevPciNodeDeviceReAttach(hostdev_mgr, pci) < 0) goto out; ret = 0; out: - virObjectUnlock(driver->inactivePciHostdevs); - virObjectUnlock(driver->activePciHostdevs); virPCIDeviceFree(pci); cleanup: virNodeDeviceDefFree(def); @@ -10819,12 +10774,12 @@ cleanup: static int qemuNodeDeviceReset(virNodeDevicePtr dev) { - virQEMUDriverPtr driver = dev->conn->privateData; virPCIDevicePtr pci; unsigned domain = 0, bus = 0, slot = 0, function = 0; int ret = -1; virNodeDeviceDefPtr def = NULL; char *xml = NULL; + virHostdevManagerPtr hostdev_mgr; xml = virNodeDeviceGetXMLDesc(dev, 0); if (!xml) @@ -10844,17 +10799,12 @@ qemuNodeDeviceReset(virNodeDevicePtr dev) if (!pci) goto cleanup; - virObjectLock(driver->activePciHostdevs); - virObjectLock(driver->inactivePciHostdevs); - - if (virPCIDeviceReset(pci, driver->activePciHostdevs, - driver->inactivePciHostdevs) < 0) + hostdev_mgr = virHostdevManagerGetDefault(); + if (virHostdevPciNodeDeviceReset(hostdev_mgr, pci) < 0) goto out; ret = 0; out: - virObjectUnlock(driver->inactivePciHostdevs); - virObjectUnlock(driver->activePciHostdevs); virPCIDeviceFree(pci); cleanup: virNodeDeviceDefFree(def); diff --git a/src/qemu/qemu_hostdev.c b/src/qemu/qemu_hostdev.c deleted file mode 100644 index 21fe47f..0000000 --- a/src/qemu/qemu_hostdev.c +++ /dev/null @@ -1,1289 +0,0 @@ -/* - * qemu_hostdev.c: QEMU hostdev management - * - * Copyright (C) 2006-2007, 2009-2013 Red Hat, Inc. - * Copyright (C) 2006 Daniel P. Berrange - * - * This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU Lesser General Public - * License as published by the Free Software Foundation; either - * version 2.1 of the License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * Lesser General Public License for more details. - * - * You should have received a copy of the GNU Lesser General Public - * License along with this library. If not, see - * <http://www.gnu.org/licenses/>. - * - * Author: Daniel P. Berrange <berrange@redhat.com> - */ - -#include <config.h> - -#include "qemu_hostdev.h" -#include "virlog.h" -#include "virerror.h" -#include "viralloc.h" -#include "virpci.h" -#include "virusb.h" -#include "virscsi.h" -#include "virnetdev.h" - -#define VIR_FROM_THIS VIR_FROM_QEMU - -static virPCIDeviceListPtr -qemuGetPciHostDeviceList(virDomainHostdevDefPtr *hostdevs, int nhostdevs) -{ - virPCIDeviceListPtr list; - size_t i; - - if (!(list = virPCIDeviceListNew())) - return NULL; - - for (i = 0; i < nhostdevs; i++) { - virDomainHostdevDefPtr hostdev = hostdevs[i]; - virPCIDevicePtr dev; - - if (hostdev->mode != VIR_DOMAIN_HOSTDEV_MODE_SUBSYS) - continue; - if (hostdev->source.subsys.type != VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_PCI) - continue; - - dev = virPCIDeviceNew(hostdev->source.subsys.u.pci.addr.domain, - hostdev->source.subsys.u.pci.addr.bus, - hostdev->source.subsys.u.pci.addr.slot, - hostdev->source.subsys.u.pci.addr.function); - if (!dev) { - virObjectUnref(list); - return NULL; - } - - if (virPCIDeviceListAdd(list, dev) < 0) { - virPCIDeviceFree(dev); - virObjectUnref(list); - return NULL; - } - - virPCIDeviceSetManaged(dev, hostdev->managed); - if (hostdev->source.subsys.u.pci.backend - == VIR_DOMAIN_HOSTDEV_PCI_BACKEND_VFIO) { - if (virPCIDeviceSetStubDriver(dev, "vfio-pci") < 0) { - virObjectUnref(list); - return NULL; - } - } else { - if (virPCIDeviceSetStubDriver(dev, "pci-stub") < 0) { - virObjectUnref(list); - return NULL; - } - } - } - - return list; -} - -/* - * qemuGetActivePciHostDeviceList - make a new list with a *copy* of - * every virPCIDevice object that is found on the activePciHostdevs - * list *and* is in the hostdev list for this domain. - * - * Return the new list, or NULL if there was a failure. - * - * Pre-condition: driver->activePciHostdevs is locked - */ -static virPCIDeviceListPtr -qemuGetActivePciHostDeviceList(virQEMUDriverPtr driver, - virDomainHostdevDefPtr *hostdevs, - int nhostdevs) -{ - virPCIDeviceListPtr list; - size_t i; - - if (!(list = virPCIDeviceListNew())) - return NULL; - - for (i = 0; i < nhostdevs; i++) { - virDomainHostdevDefPtr hostdev = hostdevs[i]; - virDevicePCIAddressPtr addr; - virPCIDevicePtr activeDev; - - if (hostdev->mode != VIR_DOMAIN_HOSTDEV_MODE_SUBSYS) - continue; - if (hostdev->source.subsys.type != VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_PCI) - continue; - - addr = &hostdev->source.subsys.u.pci.addr; - activeDev = virPCIDeviceListFindByIDs(driver->activePciHostdevs, - addr->domain, addr->bus, - addr->slot, addr->function); - if (activeDev && virPCIDeviceListAddCopy(list, activeDev) < 0) { - virObjectUnref(list); - return NULL; - } - } - - return list; -} - -int qemuUpdateActivePciHostdevs(virQEMUDriverPtr driver, - virDomainDefPtr def) -{ - virDomainHostdevDefPtr hostdev = NULL; - virPCIDevicePtr dev = NULL; - size_t i; - int ret = -1; - - if (!def->nhostdevs) - return 0; - - virObjectLock(driver->activePciHostdevs); - virObjectLock(driver->inactivePciHostdevs); - - for (i = 0; i < def->nhostdevs; i++) { - hostdev = def->hostdevs[i]; - - if (hostdev->mode != VIR_DOMAIN_HOSTDEV_MODE_SUBSYS) - continue; - if (hostdev->source.subsys.type != VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_PCI) - continue; - - dev = virPCIDeviceNew(hostdev->source.subsys.u.pci.addr.domain, - hostdev->source.subsys.u.pci.addr.bus, - hostdev->source.subsys.u.pci.addr.slot, - hostdev->source.subsys.u.pci.addr.function); - - if (!dev) - goto cleanup; - - virPCIDeviceSetManaged(dev, hostdev->managed); - if (hostdev->source.subsys.u.pci.backend - == VIR_DOMAIN_HOSTDEV_PCI_BACKEND_VFIO) { - if (virPCIDeviceSetStubDriver(dev, "vfio-pci") < 0) - goto cleanup; - } else { - if (virPCIDeviceSetStubDriver(dev, "pci-stub") < 0) - goto cleanup; - - } - virPCIDeviceSetUsedBy(dev, def->name); - - /* Setup the original states for the PCI device */ - virPCIDeviceSetUnbindFromStub(dev, hostdev->origstates.states.pci.unbind_from_stub); - virPCIDeviceSetRemoveSlot(dev, hostdev->origstates.states.pci.remove_slot); - virPCIDeviceSetReprobe(dev, hostdev->origstates.states.pci.reprobe); - - if (virPCIDeviceListAdd(driver->activePciHostdevs, dev) < 0) - goto cleanup; - dev = NULL; - } - - ret = 0; -cleanup: - virPCIDeviceFree(dev); - virObjectUnlock(driver->activePciHostdevs); - virObjectUnlock(driver->inactivePciHostdevs); - return ret; -} - -int -qemuUpdateActiveUsbHostdevs(virQEMUDriverPtr driver, - virDomainDefPtr def) -{ - virDomainHostdevDefPtr hostdev = NULL; - size_t i; - int ret = -1; - - if (!def->nhostdevs) - return 0; - - virObjectLock(driver->activeUsbHostdevs); - for (i = 0; i < def->nhostdevs; i++) { - virUSBDevicePtr usb = NULL; - hostdev = def->hostdevs[i]; - - if (hostdev->mode != VIR_DOMAIN_HOSTDEV_MODE_SUBSYS) - continue; - if (hostdev->source.subsys.type != VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_USB) - continue; - - usb = virUSBDeviceNew(hostdev->source.subsys.u.usb.bus, - hostdev->source.subsys.u.usb.device, - NULL); - if (!usb) { - VIR_WARN("Unable to reattach USB device %03d.%03d on domain %s", - hostdev->source.subsys.u.usb.bus, - hostdev->source.subsys.u.usb.device, - def->name); - continue; - } - - virUSBDeviceSetUsedBy(usb, def->name); - - if (virUSBDeviceListAdd(driver->activeUsbHostdevs, usb) < 0) { - virUSBDeviceFree(usb); - goto cleanup; - } - } - ret = 0; -cleanup: - virObjectUnlock(driver->activeUsbHostdevs); - return ret; -} - -int -qemuUpdateActiveScsiHostdevs(virQEMUDriverPtr driver, - virDomainDefPtr def) -{ - virDomainHostdevDefPtr hostdev = NULL; - size_t i; - int ret = -1; - - if (!def->nhostdevs) - return 0; - - virObjectLock(driver->activeScsiHostdevs); - for (i = 0; i < def->nhostdevs; i++) { - virSCSIDevicePtr scsi = NULL; - hostdev = def->hostdevs[i]; - - if (hostdev->mode != VIR_DOMAIN_HOSTDEV_MODE_SUBSYS || - hostdev->source.subsys.type != VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_SCSI) - continue; - - if (!(scsi = virSCSIDeviceNew(hostdev->source.subsys.u.scsi.adapter, - hostdev->source.subsys.u.scsi.bus, - hostdev->source.subsys.u.scsi.target, - hostdev->source.subsys.u.scsi.unit, - hostdev->readonly))) - goto cleanup; - - virSCSIDeviceSetUsedBy(scsi, def->name); - - if (virSCSIDeviceListAdd(driver->activeScsiHostdevs, scsi) < 0) { - virSCSIDeviceFree(scsi); - goto cleanup; - } - } - ret = 0; - -cleanup: - virObjectUnlock(driver->activeScsiHostdevs); - return ret; -} - -static int -qemuDomainHostdevPciSysfsPath(virDomainHostdevDefPtr hostdev, char **sysfs_path) -{ - virPCIDeviceAddress config_address; - - config_address.domain = hostdev->source.subsys.u.pci.addr.domain; - config_address.bus = hostdev->source.subsys.u.pci.addr.bus; - config_address.slot = hostdev->source.subsys.u.pci.addr.slot; - config_address.function = hostdev->source.subsys.u.pci.addr.function; - - return virPCIDeviceAddressGetSysfsFile(&config_address, sysfs_path); -} - -int -qemuDomainHostdevIsVirtualFunction(virDomainHostdevDefPtr hostdev) -{ - char *sysfs_path = NULL; - int ret = -1; - - if (qemuDomainHostdevPciSysfsPath(hostdev, &sysfs_path) < 0) - return ret; - - ret = virPCIIsVirtualFunction(sysfs_path); - - VIR_FREE(sysfs_path); - - return ret; -} - -static int -qemuDomainHostdevNetDevice(virDomainHostdevDefPtr hostdev, char **linkdev, - int *vf) -{ - int ret = -1; - char *sysfs_path = NULL; - - if (qemuDomainHostdevPciSysfsPath(hostdev, &sysfs_path) < 0) - return ret; - - if (virPCIIsVirtualFunction(sysfs_path) == 1) { - if (virPCIGetVirtualFunctionInfo(sysfs_path, linkdev, - vf) < 0) - goto cleanup; - } else { - if (virPCIGetNetName(sysfs_path, linkdev) < 0) - goto cleanup; - *vf = -1; - } - - ret = 0; - -cleanup: - VIR_FREE(sysfs_path); - - return ret; -} - -static int -qemuDomainHostdevNetConfigVirtPortProfile(const char *linkdev, int vf, - virNetDevVPortProfilePtr virtPort, - const virMacAddrPtr macaddr, - const unsigned char *uuid, - bool associate) -{ - int ret = -1; - - if (!virtPort) - return ret; - - switch (virtPort->virtPortType) { - case VIR_NETDEV_VPORT_PROFILE_NONE: - case VIR_NETDEV_VPORT_PROFILE_OPENVSWITCH: - case VIR_NETDEV_VPORT_PROFILE_8021QBG: - case VIR_NETDEV_VPORT_PROFILE_LAST: - virReportError(VIR_ERR_CONFIG_UNSUPPORTED, - _("virtualport type %s is " - "currently not supported on interfaces of type " - "hostdev"), - virNetDevVPortTypeToString(virtPort->virtPortType)); - break; - - case VIR_NETDEV_VPORT_PROFILE_8021QBH: - if (associate) - ret = virNetDevVPortProfileAssociate(NULL, virtPort, macaddr, - linkdev, vf, uuid, - VIR_NETDEV_VPORT_PROFILE_OP_CREATE, false); - else - ret = virNetDevVPortProfileDisassociate(NULL, virtPort, - macaddr, linkdev, vf, - VIR_NETDEV_VPORT_PROFILE_OP_DESTROY); - break; - } - - return ret; -} - -int -qemuDomainHostdevNetConfigReplace(virDomainHostdevDefPtr hostdev, - const unsigned char *uuid, - char *stateDir) -{ - char *linkdev = NULL; - virNetDevVlanPtr vlan; - virNetDevVPortProfilePtr virtPort; - int ret = -1; - int vf = -1; - int vlanid = -1; - bool port_profile_associate = true; - int isvf; - - isvf = qemuDomainHostdevIsVirtualFunction(hostdev); - if (isvf <= 0) { - virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s", - _("Interface type hostdev is currently supported on" - " SR-IOV Virtual Functions only")); - return ret; - } - - if (qemuDomainHostdevNetDevice(hostdev, &linkdev, &vf) < 0) - return ret; - - vlan = virDomainNetGetActualVlan(hostdev->parent.data.net); - virtPort = virDomainNetGetActualVirtPortProfile( - hostdev->parent.data.net); - if (virtPort) { - if (vlan) { - virReportError(VIR_ERR_CONFIG_UNSUPPORTED, - _("direct setting of the vlan tag is not allowed " - "for hostdev devices using %s mode"), - virNetDevVPortTypeToString(virtPort->virtPortType)); - goto cleanup; - } - ret = qemuDomainHostdevNetConfigVirtPortProfile(linkdev, vf, - virtPort, &hostdev->parent.data.net->mac, uuid, - port_profile_associate); - } else { - /* Set only mac and vlan */ - if (vlan) { - if (vlan->nTags != 1 || vlan->trunk) { - virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s", - _("vlan trunking is not supported " - "by SR-IOV network devices")); - goto cleanup; - } - if (vf == -1) { - virReportError(VIR_ERR_CONFIG_UNSUPPORTED, - _("vlan can only be set for SR-IOV VFs, but " - "%s is not a VF"), linkdev); - goto cleanup; - } - vlanid = vlan->tag[0]; - } else if (vf >= 0) { - vlanid = 0; /* assure any current vlan tag is reset */ - } - - ret = virNetDevReplaceNetConfig(linkdev, vf, - &hostdev->parent.data.net->mac, - vlanid, stateDir); - } -cleanup: - VIR_FREE(linkdev); - return ret; -} - -int -qemuDomainHostdevNetConfigRestore(virDomainHostdevDefPtr hostdev, - char *stateDir) -{ - char *linkdev = NULL; - virNetDevVPortProfilePtr virtPort; - int ret = -1; - int vf = -1; - bool port_profile_associate = false; - int isvf; - - isvf = qemuDomainHostdevIsVirtualFunction(hostdev); - if (isvf <= 0) { - virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s", - _("Interface type hostdev is currently supported on" - " SR-IOV Virtual Functions only")); - return ret; - } - - if (qemuDomainHostdevNetDevice(hostdev, &linkdev, &vf) < 0) - return ret; - - virtPort = virDomainNetGetActualVirtPortProfile( - hostdev->parent.data.net); - if (virtPort) - ret = qemuDomainHostdevNetConfigVirtPortProfile(linkdev, vf, virtPort, - &hostdev->parent.data.net->mac, NULL, - port_profile_associate); - else - ret = virNetDevRestoreNetConfig(linkdev, vf, stateDir); - - VIR_FREE(linkdev); - - return ret; -} - -int qemuPrepareHostdevPCIDevices(virQEMUDriverPtr driver, - const char *name, - const unsigned char *uuid, - virDomainHostdevDefPtr *hostdevs, - int nhostdevs) -{ - virPCIDeviceListPtr pcidevs; - int last_processed_hostdev_vf = -1; - size_t i; - int ret = -1; - virQEMUDriverConfigPtr cfg = virQEMUDriverGetConfig(driver); - - virObjectLock(driver->activePciHostdevs); - virObjectLock(driver->inactivePciHostdevs); - - if (!(pcidevs = qemuGetPciHostDeviceList(hostdevs, nhostdevs))) - goto cleanup; - - /* We have to use 9 loops here. *All* devices must - * be detached before we reset any of them, because - * in some cases you have to reset the whole PCI, - * which impacts all devices on it. Also, all devices - * must be reset before being marked as active. - */ - - /* Loop 1: validate that non-managed device isn't in use, eg - * by checking that device is either un-bound, or bound - * to pci-stub.ko - */ - - for (i = 0; i < virPCIDeviceListCount(pcidevs); i++) { - virPCIDevicePtr dev = virPCIDeviceListGet(pcidevs, i); - virPCIDevicePtr other; - - if (!virPCIDeviceIsAssignable(dev, !cfg->relaxedACS)) { - virReportError(VIR_ERR_OPERATION_INVALID, - _("PCI device %s is not assignable"), - virPCIDeviceGetName(dev)); - goto cleanup; - } - /* The device is in use by other active domain if - * the dev is in list driver->activePciHostdevs. - */ - if ((other = virPCIDeviceListFind(driver->activePciHostdevs, dev))) { - const char *other_name = virPCIDeviceGetUsedBy(other); - - if (other_name) - virReportError(VIR_ERR_OPERATION_INVALID, - _("PCI device %s is in use by domain %s"), - virPCIDeviceGetName(dev), other_name); - else - virReportError(VIR_ERR_OPERATION_INVALID, - _("PCI device %s is already in use"), - virPCIDeviceGetName(dev)); - goto cleanup; - } - } - - /* Loop 2: detach managed devices (i.e. bind to appropriate stub driver) */ - for (i = 0; i < virPCIDeviceListCount(pcidevs); i++) { - virPCIDevicePtr dev = virPCIDeviceListGet(pcidevs, i); - if (virPCIDeviceGetManaged(dev) && - virPCIDeviceDetach(dev, driver->activePciHostdevs, NULL) < 0) - goto reattachdevs; - } - - /* Loop 3: Now that all the PCI hostdevs have been detached, we - * can safely reset them */ - for (i = 0; i < virPCIDeviceListCount(pcidevs); i++) { - virPCIDevicePtr dev = virPCIDeviceListGet(pcidevs, i); - - if (virPCIDeviceReset(dev, driver->activePciHostdevs, - driver->inactivePciHostdevs) < 0) - goto reattachdevs; - } - - /* Loop 4: For SRIOV network devices, Now that we have detached the - * the network device, set the netdev config */ - for (i = 0; i < nhostdevs; i++) { - virDomainHostdevDefPtr hostdev = hostdevs[i]; - if (hostdev->mode != VIR_DOMAIN_HOSTDEV_MODE_SUBSYS) - continue; - if (hostdev->source.subsys.type != VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_PCI) - continue; - if (hostdev->parent.type == VIR_DOMAIN_DEVICE_NET && - hostdev->parent.data.net) { - if (qemuDomainHostdevNetConfigReplace(hostdev, uuid, - cfg->stateDir) < 0) { - goto resetvfnetconfig; - } - } - last_processed_hostdev_vf = i; - } - - /* Loop 5: Now mark all the devices as active */ - for (i = 0; i < virPCIDeviceListCount(pcidevs); i++) { - virPCIDevicePtr dev = virPCIDeviceListGet(pcidevs, i); - if (virPCIDeviceListAdd(driver->activePciHostdevs, dev) < 0) - goto inactivedevs; - } - - /* Loop 6: Now remove the devices from inactive list. */ - for (i = 0; i < virPCIDeviceListCount(pcidevs); i++) { - virPCIDevicePtr dev = virPCIDeviceListGet(pcidevs, i); - virPCIDeviceListDel(driver->inactivePciHostdevs, dev); - } - - /* Loop 7: Now set the used_by_domain of the device in - * driver->activePciHostdevs as domain name. - */ - for (i = 0; i < virPCIDeviceListCount(pcidevs); i++) { - virPCIDevicePtr dev, activeDev; - - dev = virPCIDeviceListGet(pcidevs, i); - activeDev = virPCIDeviceListFind(driver->activePciHostdevs, dev); - - if (activeDev) - virPCIDeviceSetUsedBy(activeDev, name); - } - - /* Loop 8: Now set the original states for hostdev def */ - for (i = 0; i < nhostdevs; i++) { - virPCIDevicePtr dev; - virPCIDevicePtr pcidev; - virDomainHostdevDefPtr hostdev = hostdevs[i]; - - if (hostdev->mode != VIR_DOMAIN_HOSTDEV_MODE_SUBSYS) - continue; - if (hostdev->source.subsys.type != VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_PCI) - continue; - - dev = virPCIDeviceNew(hostdev->source.subsys.u.pci.addr.domain, - hostdev->source.subsys.u.pci.addr.bus, - hostdev->source.subsys.u.pci.addr.slot, - hostdev->source.subsys.u.pci.addr.function); - - /* original states "unbind_from_stub", "remove_slot", - * "reprobe" were already set by pciDettachDevice in - * loop 2. - */ - if ((pcidev = virPCIDeviceListFind(pcidevs, dev))) { - hostdev->origstates.states.pci.unbind_from_stub = - virPCIDeviceGetUnbindFromStub(pcidev); - hostdev->origstates.states.pci.remove_slot = - virPCIDeviceGetRemoveSlot(pcidev); - hostdev->origstates.states.pci.reprobe = - virPCIDeviceGetReprobe(pcidev); - } - - virPCIDeviceFree(dev); - } - - /* Loop 9: Now steal all the devices from pcidevs */ - while (virPCIDeviceListCount(pcidevs) > 0) - virPCIDeviceListStealIndex(pcidevs, 0); - - ret = 0; - goto cleanup; - -inactivedevs: - /* Only steal all the devices from driver->activePciHostdevs. We will - * free them in virObjectUnref(). - */ - for (i = 0; i < virPCIDeviceListCount(pcidevs); i++) { - virPCIDevicePtr dev = virPCIDeviceListGet(pcidevs, i); - virPCIDeviceListSteal(driver->activePciHostdevs, dev); - } - -resetvfnetconfig: - for (i = 0; last_processed_hostdev_vf != -1 && - i < last_processed_hostdev_vf; i++) { - virDomainHostdevDefPtr hostdev = hostdevs[i]; - if (hostdev->parent.type == VIR_DOMAIN_DEVICE_NET && - hostdev->parent.data.net) { - qemuDomainHostdevNetConfigRestore(hostdev, cfg->stateDir); - } - } - -reattachdevs: - for (i = 0; i < virPCIDeviceListCount(pcidevs); i++) { - virPCIDevicePtr dev = virPCIDeviceListGet(pcidevs, i); - - /* NB: This doesn't actually re-bind to original driver, just - * unbinds from the stub driver - */ - virPCIDeviceReattach(dev, driver->activePciHostdevs, NULL); - } - -cleanup: - virObjectUnlock(driver->activePciHostdevs); - virObjectUnlock(driver->inactivePciHostdevs); - virObjectUnref(pcidevs); - virObjectUnref(cfg); - return ret; -} - -int -qemuPrepareHostdevUSBDevices(virQEMUDriverPtr driver, - const char *name, - virUSBDeviceListPtr list) -{ - size_t i, j; - unsigned int count; - virUSBDevicePtr tmp; - - virObjectLock(driver->activeUsbHostdevs); - count = virUSBDeviceListCount(list); - - for (i = 0; i < count; i++) { - virUSBDevicePtr usb = virUSBDeviceListGet(list, i); - if ((tmp = virUSBDeviceListFind(driver->activeUsbHostdevs, usb))) { - const char *other_name = virUSBDeviceGetUsedBy(tmp); - - if (other_name) - virReportError(VIR_ERR_OPERATION_INVALID, - _("USB device %s is in use by domain %s"), - virUSBDeviceGetName(tmp), other_name); - else - virReportError(VIR_ERR_OPERATION_INVALID, - _("USB device %s is already in use"), - virUSBDeviceGetName(tmp)); - goto error; - } - - virUSBDeviceSetUsedBy(usb, name); - VIR_DEBUG("Adding %03d.%03d dom=%s to activeUsbHostdevs", - virUSBDeviceGetBus(usb), virUSBDeviceGetDevno(usb), name); - /* - * The caller is responsible to steal these usb devices - * from the virUSBDeviceList that passed in on success, - * perform rollback on failure. - */ - if (virUSBDeviceListAdd(driver->activeUsbHostdevs, usb) < 0) - goto error; - } - - virObjectUnlock(driver->activeUsbHostdevs); - return 0; - -error: - for (j = 0; j < i; j++) { - tmp = virUSBDeviceListGet(list, i); - virUSBDeviceListSteal(driver->activeUsbHostdevs, tmp); - } - virObjectUnlock(driver->activeUsbHostdevs); - return -1; -} - -int -qemuFindHostdevUSBDevice(virDomainHostdevDefPtr hostdev, - bool mandatory, - virUSBDevicePtr *usb) -{ - unsigned vendor = hostdev->source.subsys.u.usb.vendor; - unsigned product = hostdev->source.subsys.u.usb.product; - unsigned bus = hostdev->source.subsys.u.usb.bus; - unsigned device = hostdev->source.subsys.u.usb.device; - bool autoAddress = hostdev->source.subsys.u.usb.autoAddress; - int rc; - - *usb = NULL; - - if (vendor && bus) { - rc = virUSBDeviceFind(vendor, product, bus, device, - NULL, - autoAddress ? false : mandatory, - usb); - if (rc < 0) { - return -1; - } else if (!autoAddress) { - goto out; - } else { - VIR_INFO("USB device %x:%x could not be found at previous" - " address (bus:%u device:%u)", - vendor, product, bus, device); - } - } - - /* When vendor is specified, its USB address is either unspecified or the - * device could not be found at the USB device where it had been - * automatically found before. - */ - if (vendor) { - virUSBDeviceListPtr devs; - - rc = virUSBDeviceFindByVendor(vendor, product, NULL, mandatory, &devs); - if (rc < 0) - return -1; - - if (rc == 1) { - *usb = virUSBDeviceListGet(devs, 0); - virUSBDeviceListSteal(devs, *usb); - } - virObjectUnref(devs); - - if (rc == 0) { - goto out; - } else if (rc > 1) { - if (autoAddress) { - virReportError(VIR_ERR_OPERATION_FAILED, - _("Multiple USB devices for %x:%x were found," - " but none of them is at bus:%u device:%u"), - vendor, product, bus, device); - } else { - virReportError(VIR_ERR_OPERATION_FAILED, - _("Multiple USB devices for %x:%x, " - "use <address> to specify one"), - vendor, product); - } - return -1; - } - - hostdev->source.subsys.u.usb.bus = virUSBDeviceGetBus(*usb); - hostdev->source.subsys.u.usb.device = virUSBDeviceGetDevno(*usb); - hostdev->source.subsys.u.usb.autoAddress = true; - - if (autoAddress) { - VIR_INFO("USB device %x:%x found at bus:%u device:%u (moved" - " from bus:%u device:%u)", - vendor, product, - hostdev->source.subsys.u.usb.bus, - hostdev->source.subsys.u.usb.device, - bus, device); - } - } else if (!vendor && bus) { - if (virUSBDeviceFindByBus(bus, device, NULL, mandatory, usb) < 0) - return -1; - } - -out: - if (!*usb) - hostdev->missing = true; - return 0; -} - -static int -qemuPrepareHostUSBDevices(virQEMUDriverPtr driver, - virDomainDefPtr def, - bool coldBoot) -{ - size_t i; - int ret = -1; - virUSBDeviceListPtr list; - virUSBDevicePtr tmp; - virDomainHostdevDefPtr *hostdevs = def->hostdevs; - int nhostdevs = def->nhostdevs; - - /* To prevent situation where USB device is assigned to two domains - * we need to keep a list of currently assigned USB devices. - * This is done in several loops which cannot be joined into one big - * loop. See qemuPrepareHostdevPCIDevices() - */ - if (!(list = virUSBDeviceListNew())) - goto cleanup; - - /* Loop 1: build temporary list - */ - for (i = 0; i < nhostdevs; i++) { - virDomainHostdevDefPtr hostdev = hostdevs[i]; - bool required = true; - virUSBDevicePtr usb; - - if (hostdev->mode != VIR_DOMAIN_HOSTDEV_MODE_SUBSYS) - continue; - if (hostdev->source.subsys.type != VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_USB) - continue; - - if (hostdev->startupPolicy == VIR_DOMAIN_STARTUP_POLICY_OPTIONAL || - (hostdev->startupPolicy == VIR_DOMAIN_STARTUP_POLICY_REQUISITE && - !coldBoot)) - required = false; - - if (qemuFindHostdevUSBDevice(hostdev, required, &usb) < 0) - goto cleanup; - - if (usb && virUSBDeviceListAdd(list, usb) < 0) { - virUSBDeviceFree(usb); - goto cleanup; - } - } - - /* Mark devices in temporary list as used by @name - * and add them do driver list. However, if something goes - * wrong, perform rollback. - */ - if (qemuPrepareHostdevUSBDevices(driver, def->name, list) < 0) - goto cleanup; - - /* Loop 2: Temporary list was successfully merged with - * driver list, so steal all items to avoid freeing them - * in cleanup label. - */ - while (virUSBDeviceListCount(list) > 0) { - tmp = virUSBDeviceListGet(list, 0); - virUSBDeviceListSteal(list, tmp); - } - - ret = 0; - -cleanup: - virObjectUnref(list); - return ret; -} - -int -qemuPrepareHostdevSCSIDevices(virQEMUDriverPtr driver, - const char *name, - virDomainHostdevDefPtr *hostdevs, - int nhostdevs) -{ - size_t i, j; - int count; - virSCSIDeviceListPtr list; - virSCSIDevicePtr tmp; - - /* Loop 1: Add the shared scsi host device to shared device - * table. - */ - for (i = 0; i < nhostdevs; i++) { - virDomainDeviceDef dev; - - dev.type = VIR_DOMAIN_DEVICE_HOSTDEV; - dev.data.hostdev = hostdevs[i]; - - if (qemuAddSharedDevice(driver, &dev, name) < 0) - return -1; - - if (qemuSetUnprivSGIO(&dev) < 0) - return -1; - } - - /* To prevent situation where SCSI device is assigned to two domains - * we need to keep a list of currently assigned SCSI devices. - * This is done in several loops which cannot be joined into one big - * loop. See qemuPrepareHostdevPCIDevices() - */ - if (!(list = virSCSIDeviceListNew())) - goto cleanup; - - /* Loop 2: build temporary list */ - for (i = 0; i < nhostdevs; i++) { - virDomainHostdevDefPtr hostdev = hostdevs[i]; - virSCSIDevicePtr scsi; - - if (hostdev->mode != VIR_DOMAIN_HOSTDEV_MODE_SUBSYS || - hostdev->source.subsys.type != VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_SCSI) - continue; - - if (hostdev->managed) { - virReportError(VIR_ERR_XML_ERROR, "%s", - _("SCSI host device doesn't support managed mode")); - goto cleanup; - } - - if (!(scsi = virSCSIDeviceNew(hostdev->source.subsys.u.scsi.adapter, - hostdev->source.subsys.u.scsi.bus, - hostdev->source.subsys.u.scsi.target, - hostdev->source.subsys.u.scsi.unit, - hostdev->readonly))) - goto cleanup; - - if (scsi && virSCSIDeviceListAdd(list, scsi) < 0) { - virSCSIDeviceFree(scsi); - goto cleanup; - } - } - - /* Loop 3: Mark devices in temporary list as used by @name - * and add them to driver list. However, if something goes - * wrong, perform rollback. - */ - virObjectLock(driver->activeScsiHostdevs); - count = virSCSIDeviceListCount(list); - - for (i = 0; i < count; i++) { - virSCSIDevicePtr scsi = virSCSIDeviceListGet(list, i); - if ((tmp = virSCSIDeviceListFind(driver->activeScsiHostdevs, scsi))) { - const char *other_name = virSCSIDeviceGetUsedBy(tmp); - - if (other_name) - virReportError(VIR_ERR_OPERATION_INVALID, - _("SCSI device %s is in use by domain %s"), - virSCSIDeviceGetName(tmp), other_name); - else - virReportError(VIR_ERR_OPERATION_INVALID, - _("SCSI device %s is already in use"), - virSCSIDeviceGetName(tmp)); - goto error; - } - - virSCSIDeviceSetUsedBy(scsi, name); - VIR_DEBUG("Adding %s to activeScsiHostdevs", virSCSIDeviceGetName(scsi)); - - if (virSCSIDeviceListAdd(driver->activeScsiHostdevs, scsi) < 0) - goto error; - } - - virObjectUnlock(driver->activeScsiHostdevs); - - /* Loop 4: Temporary list was successfully merged with - * driver list, so steal all items to avoid freeing them - * when freeing temporary list. - */ - while (virSCSIDeviceListCount(list) > 0) { - tmp = virSCSIDeviceListGet(list, 0); - virSCSIDeviceListSteal(list, tmp); - } - - virObjectUnref(list); - return 0; - -error: - for (j = 0; j < i; j++) { - tmp = virSCSIDeviceListGet(list, i); - virSCSIDeviceListSteal(driver->activeScsiHostdevs, tmp); - } - virObjectUnlock(driver->activeScsiHostdevs); -cleanup: - virObjectUnref(list); - return -1; -} - -int qemuPrepareHostDevices(virQEMUDriverPtr driver, - virDomainDefPtr def, - bool coldBoot) -{ - if (!def->nhostdevs) - return 0; - - if (qemuPrepareHostdevPCIDevices(driver, def->name, def->uuid, - def->hostdevs, def->nhostdevs) < 0) - return -1; - - if (qemuPrepareHostUSBDevices(driver, def, coldBoot) < 0) - return -1; - - if (qemuPrepareHostdevSCSIDevices(driver, def->name, - def->hostdevs, def->nhostdevs) < 0) - return -1; - - return 0; -} - - -/* - * Pre-condition: driver->inactivePciHostdevs & driver->activePciHostdevs - * are locked - */ -void qemuReattachPciDevice(virPCIDevicePtr dev, virQEMUDriverPtr driver) -{ - int retries = 100; - - /* If the device is not managed and was attached to guest - * successfully, it must have been inactive. - */ - if (!virPCIDeviceGetManaged(dev)) { - if (virPCIDeviceListAdd(driver->inactivePciHostdevs, dev) < 0) - virPCIDeviceFree(dev); - return; - } - - while (virPCIDeviceWaitForCleanup(dev, "kvm_assigned_device") - && retries) { - usleep(100*1000); - retries--; - } - - if (virPCIDeviceReattach(dev, driver->activePciHostdevs, - driver->inactivePciHostdevs) < 0) { - virErrorPtr err = virGetLastError(); - VIR_ERROR(_("Failed to re-attach PCI device: %s"), - err ? err->message : _("unknown error")); - virResetError(err); - } - virPCIDeviceFree(dev); -} - - -void qemuDomainReAttachHostdevDevices(virQEMUDriverPtr driver, - const char *name, - virDomainHostdevDefPtr *hostdevs, - int nhostdevs) -{ - virPCIDeviceListPtr pcidevs; - size_t i; - virQEMUDriverConfigPtr cfg = virQEMUDriverGetConfig(driver); - - virObjectLock(driver->activePciHostdevs); - virObjectLock(driver->inactivePciHostdevs); - - if (!(pcidevs = qemuGetActivePciHostDeviceList(driver, - hostdevs, - nhostdevs))) { - virErrorPtr err = virGetLastError(); - VIR_ERROR(_("Failed to allocate PCI device list: %s"), - err ? err->message : _("unknown error")); - virResetError(err); - goto cleanup; - } - - /* Again 4 loops; mark all devices as inactive before reset - * them and reset all the devices before re-attach. - * Attach mac and port profile parameters to devices - */ - for (i = 0; i < virPCIDeviceListCount(pcidevs); i++) { - virPCIDevicePtr dev = virPCIDeviceListGet(pcidevs, i); - virPCIDevicePtr activeDev = NULL; - - /* delete the copy of the dev from pcidevs if it's used by - * other domain. Or delete it from activePciHostDevs if it had - * been used by this domain. - */ - activeDev = virPCIDeviceListFind(driver->activePciHostdevs, dev); - if (activeDev && - STRNEQ_NULLABLE(name, virPCIDeviceGetUsedBy(activeDev))) { - virPCIDeviceListDel(pcidevs, dev); - continue; - } - - virPCIDeviceListDel(driver->activePciHostdevs, dev); - } - - /* At this point, any device that had been used by the guest is in - * pcidevs, but has been removed from activePciHostdevs. - */ - - /* - * For SRIOV net host devices, unset mac and port profile before - * reset and reattach device - */ - for (i = 0; i < nhostdevs; i++) { - virDomainHostdevDefPtr hostdev = hostdevs[i]; - if (hostdev->mode != VIR_DOMAIN_HOSTDEV_MODE_SUBSYS) - continue; - if (hostdev->source.subsys.type != VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_PCI) - continue; - if (hostdev->parent.type == VIR_DOMAIN_DEVICE_NET && - hostdev->parent.data.net) { - qemuDomainHostdevNetConfigRestore(hostdev, cfg->stateDir); - } - } - - for (i = 0; i < virPCIDeviceListCount(pcidevs); i++) { - virPCIDevicePtr dev = virPCIDeviceListGet(pcidevs, i); - - if (virPCIDeviceReset(dev, driver->activePciHostdevs, - driver->inactivePciHostdevs) < 0) { - virErrorPtr err = virGetLastError(); - VIR_ERROR(_("Failed to reset PCI device: %s"), - err ? err->message : _("unknown error")); - virResetError(err); - } - } - - while (virPCIDeviceListCount(pcidevs) > 0) { - virPCIDevicePtr dev = virPCIDeviceListStealIndex(pcidevs, 0); - qemuReattachPciDevice(dev, driver); - } - - virObjectUnref(pcidevs); -cleanup: - virObjectUnlock(driver->activePciHostdevs); - virObjectUnlock(driver->inactivePciHostdevs); - virObjectUnref(cfg); -} - -static void -qemuDomainReAttachHostUsbDevices(virQEMUDriverPtr driver, - const char *name, - virDomainHostdevDefPtr *hostdevs, - int nhostdevs) -{ - size_t i; - - virObjectLock(driver->activeUsbHostdevs); - for (i = 0; i < nhostdevs; i++) { - virDomainHostdevDefPtr hostdev = hostdevs[i]; - virUSBDevicePtr usb, tmp; - const char *used_by = NULL; - - if (hostdev->mode != VIR_DOMAIN_HOSTDEV_MODE_SUBSYS) - continue; - if (hostdev->source.subsys.type != VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_USB) - continue; - if (hostdev->missing) - continue; - - usb = virUSBDeviceNew(hostdev->source.subsys.u.usb.bus, - hostdev->source.subsys.u.usb.device, - NULL); - - if (!usb) { - VIR_WARN("Unable to reattach USB device %03d.%03d on domain %s", - hostdev->source.subsys.u.usb.bus, - hostdev->source.subsys.u.usb.device, - name); - continue; - } - - /* Delete only those USB devices which belongs - * to domain @name because qemuProcessStart() might - * have failed because USB device is already taken. - * Therefore we want to steal only those devices from - * the list which were taken by @name */ - - tmp = virUSBDeviceListFind(driver->activeUsbHostdevs, usb); - virUSBDeviceFree(usb); - - if (!tmp) { - VIR_WARN("Unable to find device %03d.%03d " - "in list of active USB devices", - hostdev->source.subsys.u.usb.bus, - hostdev->source.subsys.u.usb.device); - continue; - } - - used_by = virUSBDeviceGetUsedBy(tmp); - if (STREQ_NULLABLE(used_by, name)) { - VIR_DEBUG("Removing %03d.%03d dom=%s from activeUsbHostdevs", - hostdev->source.subsys.u.usb.bus, - hostdev->source.subsys.u.usb.device, - name); - - virUSBDeviceListDel(driver->activeUsbHostdevs, tmp); - } - } - virObjectUnlock(driver->activeUsbHostdevs); -} - -void -qemuDomainReAttachHostScsiDevices(virQEMUDriverPtr driver, - const char *name, - virDomainHostdevDefPtr *hostdevs, - int nhostdevs) -{ - size_t i; - - virObjectLock(driver->activeScsiHostdevs); - for (i = 0; i < nhostdevs; i++) { - virDomainHostdevDefPtr hostdev = hostdevs[i]; - virSCSIDevicePtr scsi, tmp; - const char *used_by = NULL; - virDomainDeviceDef dev; - - dev.type = VIR_DOMAIN_DEVICE_HOSTDEV; - dev.data.hostdev = hostdev; - - ignore_value(qemuRemoveSharedDevice(driver, &dev, name)); - - if (hostdev->mode != VIR_DOMAIN_HOSTDEV_MODE_SUBSYS || - hostdev->source.subsys.type != VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_SCSI) - continue; - - if (!(scsi = virSCSIDeviceNew(hostdev->source.subsys.u.scsi.adapter, - hostdev->source.subsys.u.scsi.bus, - hostdev->source.subsys.u.scsi.target, - hostdev->source.subsys.u.scsi.unit, - hostdev->readonly))) { - VIR_WARN("Unable to reattach SCSI device %s:%d:%d:%d on domain %s", - hostdev->source.subsys.u.scsi.adapter, - hostdev->source.subsys.u.scsi.bus, - hostdev->source.subsys.u.scsi.target, - hostdev->source.subsys.u.scsi.unit, - name); - continue; - } - - /* Only delete the devices which are marked as being used by @name, - * because qemuProcessStart could fail on the half way. */ - - tmp = virSCSIDeviceListFind(driver->activeScsiHostdevs, scsi); - virSCSIDeviceFree(scsi); - - if (!tmp) { - VIR_WARN("Unable to find device %s:%d:%d:%d " - "in list of active SCSI devices", - hostdev->source.subsys.u.scsi.adapter, - hostdev->source.subsys.u.scsi.bus, - hostdev->source.subsys.u.scsi.target, - hostdev->source.subsys.u.scsi.unit); - continue; - } - - used_by = virSCSIDeviceGetUsedBy(tmp); - if (STREQ_NULLABLE(used_by, name)) { - VIR_DEBUG("Removing %s:%d:%d:%d dom=%s from activeScsiHostdevs", - hostdev->source.subsys.u.scsi.adapter, - hostdev->source.subsys.u.scsi.bus, - hostdev->source.subsys.u.scsi.target, - hostdev->source.subsys.u.scsi.unit, - name); - - virSCSIDeviceListDel(driver->activeScsiHostdevs, tmp); - } - } - virObjectUnlock(driver->activeScsiHostdevs); -} - -void qemuDomainReAttachHostDevices(virQEMUDriverPtr driver, - virDomainDefPtr def) -{ - if (!def->nhostdevs) - return; - - qemuDomainReAttachHostdevDevices(driver, def->name, def->hostdevs, - def->nhostdevs); - - qemuDomainReAttachHostUsbDevices(driver, def->name, def->hostdevs, - def->nhostdevs); - - qemuDomainReAttachHostScsiDevices(driver, def->name, def->hostdevs, - def->nhostdevs); -} diff --git a/src/qemu/qemu_hostdev.h b/src/qemu/qemu_hostdev.h deleted file mode 100644 index 327d4d5..0000000 --- a/src/qemu/qemu_hostdev.h +++ /dev/null @@ -1,72 +0,0 @@ -/* - * qemu_hostdev.h: QEMU hostdev management - * - * Copyright (C) 2006-2007, 2009-2010 Red Hat, Inc. - * Copyright (C) 2006 Daniel P. Berrange - * - * This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU Lesser General Public - * License as published by the Free Software Foundation; either - * version 2.1 of the License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * Lesser General Public License for more details. - * - * You should have received a copy of the GNU Lesser General Public - * License along with this library. If not, see - * <http://www.gnu.org/licenses/>. - * - * Author: Daniel P. Berrange <berrange@redhat.com> - */ - -#ifndef __QEMU_HOSTDEV_H__ -# define __QEMU_HOSTDEV_H__ - -# include "qemu_conf.h" -# include "domain_conf.h" - -int qemuUpdateActivePciHostdevs(virQEMUDriverPtr driver, - virDomainDefPtr def); -int qemuUpdateActiveUsbHostdevs(virQEMUDriverPtr driver, - virDomainDefPtr def); -int qemuUpdateActiveScsiHostdevs(virQEMUDriverPtr driver, - virDomainDefPtr def); -int qemuPrepareHostdevPCIDevices(virQEMUDriverPtr driver, - const char *name, - const unsigned char *uuid, - virDomainHostdevDefPtr *hostdevs, - int nhostdevs); -int qemuFindHostdevUSBDevice(virDomainHostdevDefPtr hostdev, - bool mandatory, - virUSBDevicePtr *usb); -int qemuPrepareHostdevUSBDevices(virQEMUDriverPtr driver, - const char *name, - virUSBDeviceListPtr list); -int qemuPrepareHostdevSCSIDevices(virQEMUDriverPtr driver, - const char *name, - virDomainHostdevDefPtr *hostdevs, - int nhostdevs); -int qemuPrepareHostDevices(virQEMUDriverPtr driver, - virDomainDefPtr def, - bool coldBoot); -void qemuDomainReAttachHostScsiDevices(virQEMUDriverPtr driver, - const char *name, - virDomainHostdevDefPtr *hostdevs, - int nhostdevs); -void qemuReattachPciDevice(virPCIDevicePtr dev, virQEMUDriverPtr driver); -void qemuDomainReAttachHostdevDevices(virQEMUDriverPtr driver, - const char *name, - virDomainHostdevDefPtr *hostdevs, - int nhostdevs); -void qemuDomainReAttachHostDevices(virQEMUDriverPtr driver, - virDomainDefPtr def); -int qemuDomainHostdevIsVirtualFunction(virDomainHostdevDefPtr hostdev); -int qemuDomainHostdevNetConfigReplace(virDomainHostdevDefPtr hostdev, - const unsigned char *uuid, - char *stateDir); -int qemuDomainHostdevNetConfigRestore(virDomainHostdevDefPtr hostdev, - char *stateDir); - -#endif /* __QEMU_HOSTDEV_H__ */ diff --git a/src/qemu/qemu_hotplug.c b/src/qemu/qemu_hotplug.c index 6cdee44..e659def 100644 --- a/src/qemu/qemu_hotplug.c +++ b/src/qemu/qemu_hotplug.c @@ -30,7 +30,7 @@ #include "qemu_domain.h" #include "qemu_command.h" #include "qemu_bridge_filter.h" -#include "qemu_hostdev.h" +#include "qemu_conf.h" #include "domain_audit.h" #include "domain_nwfilter.h" #include "virlog.h" @@ -50,6 +50,7 @@ #include "virstoragefile.h" #include "virstring.h" #include "virtime.h" +#include "virhostdev.h" #define VIR_FROM_THIS VIR_FROM_QEMU #define CHANGE_MEDIA_RETRIES 10 @@ -1134,12 +1135,19 @@ int qemuDomainAttachHostPciDevice(virQEMUDriverPtr driver, int configfd = -1; char *configfd_name = NULL; bool releaseaddr = false; + virQEMUDriverConfigPtr cfg = virQEMUDriverGetConfig(driver); + virHostdevManagerPtr hostdev_mgr; + unsigned int flags = 0; if (VIR_REALLOC_N(vm->def->hostdevs, vm->def->nhostdevs + 1) < 0) return -1; - if (qemuPrepareHostdevPCIDevices(driver, vm->def->name, vm->def->uuid, - &hostdev, 1) < 0) + hostdev_mgr = virHostdevManagerGetDefault(); + if (!cfg->relaxedACS) + flags |= VIR_STRICT_ACS_CHECK; + if (virHostdevPreparePciHostdevs(hostdev_mgr, QEMU_DRIVER_NAME, + vm->def->name, vm->def->uuid, + &hostdev, 1, flags) < 0) return -1; if (hostdev->source.subsys.u.pci.backend @@ -1223,7 +1231,8 @@ error: if (releaseaddr) qemuDomainReleaseDeviceAddress(vm, hostdev->info, NULL); - qemuDomainReAttachHostdevDevices(driver, vm->def->name, &hostdev, 1); + virHostdevReAttachPciHostdevs(hostdev_mgr, QEMU_DRIVER_NAME, + vm->def->name, &hostdev, 1); VIR_FREE(devstr); VIR_FREE(configfd_name); @@ -1408,26 +1417,21 @@ int qemuDomainAttachHostUsbDevice(virQEMUDriverPtr driver, virDomainHostdevDefPtr hostdev) { qemuDomainObjPrivatePtr priv = vm->privateData; - virUSBDeviceList *list = NULL; virUSBDevicePtr usb = NULL; char *devstr = NULL; bool added = false; int ret = -1; + virHostdevManagerPtr hostdev_mgr; - if (qemuFindHostdevUSBDevice(hostdev, true, &usb) < 0) - return -1; - - if (!(list = virUSBDeviceListNew())) - goto cleanup; - - if (virUSBDeviceListAdd(list, usb) < 0) - goto cleanup; - - if (qemuPrepareHostdevUSBDevices(driver, vm->def->name, list) < 0) + hostdev_mgr = virHostdevManagerGetDefault(); + if (virHostdevPrepareUsbHostdevs(hostdev_mgr, + QEMU_DRIVER_NAME, + vm->def->name, + &hostdev, + 1, 0) < 0) goto cleanup; added = true; - virUSBDeviceListSteal(list, usb); if (virQEMUCapsGet(priv->qemuCaps, QEMU_CAPS_DEVICE)) { if (qemuAssignDeviceHostdevAlias(vm->def, hostdev, -1) < 0) @@ -1456,9 +1460,9 @@ int qemuDomainAttachHostUsbDevice(virQEMUDriverPtr driver, ret = 0; cleanup: if (added) - virUSBDeviceListSteal(driver->activeUsbHostdevs, usb); + virHostdevReAttachUsbHostdevs(hostdev_mgr, QEMU_DRIVER_NAME, + vm->def->name, &hostdev, 1); virUSBDeviceFree(usb); - virObjectUnref(list); VIR_FREE(devstr); return ret; } @@ -1472,6 +1476,7 @@ qemuDomainAttachHostScsiDevice(virQEMUDriverPtr driver, qemuDomainObjPrivatePtr priv = vm->privateData; char *devstr = NULL; char *drvstr = NULL; + virHostdevManagerPtr hostdev_mgr; if (!virQEMUCapsGet(priv->qemuCaps, QEMU_CAPS_DRIVE) || !virQEMUCapsGet(priv->qemuCaps, QEMU_CAPS_DEVICE) || @@ -1481,8 +1486,11 @@ qemuDomainAttachHostScsiDevice(virQEMUDriverPtr driver, return -1; } - if (qemuPrepareHostdevSCSIDevices(driver, vm->def->name, - &hostdev, 1)) { + hostdev_mgr = virHostdevManagerGetDefault(); + if (virHostdevPrepareScsiHostdevs(hostdev_mgr, + QEMU_DRIVER_NAME, + vm->def->name, + &hostdev, 1) < 0) { virReportError(VIR_ERR_INTERNAL_ERROR, _("Unable to prepare scsi hostdev: %s:%d:%d:%d"), hostdev->source.subsys.u.scsi.adapter, @@ -1530,7 +1538,8 @@ qemuDomainAttachHostScsiDevice(virQEMUDriverPtr driver, ret = 0; cleanup: if (ret < 0) - qemuDomainReAttachHostScsiDevices(driver, vm->def->name, &hostdev, 1); + virHostdevReAttachScsiHostdevs(hostdev_mgr, QEMU_DRIVER_NAME, + vm->def->name, &hostdev, 1); VIR_FREE(drvstr); VIR_FREE(devstr); return ret; @@ -2495,71 +2504,38 @@ qemuDomainRemoveNetDevice(virQEMUDriverPtr driver, static void -qemuDomainRemovePCIHostDevice(virQEMUDriverPtr driver, - virDomainObjPtr vm, +qemuDomainRemovePCIHostDevice(virDomainObjPtr vm, virDomainHostdevDefPtr hostdev) { - virQEMUDriverConfigPtr cfg = virQEMUDriverGetConfig(driver); - virDomainHostdevSubsysPtr subsys = &hostdev->source.subsys; - virPCIDevicePtr pci; - virPCIDevicePtr activePci; + virHostdevManagerPtr hostdev_mgr; - /* - * For SRIOV net host devices, unset mac and port profile before - * reset and reattach device - */ - if (hostdev->parent.data.net) - qemuDomainHostdevNetConfigRestore(hostdev, cfg->stateDir); - - virObjectLock(driver->activePciHostdevs); - virObjectLock(driver->inactivePciHostdevs); - pci = virPCIDeviceNew(subsys->u.pci.addr.domain, subsys->u.pci.addr.bus, - subsys->u.pci.addr.slot, subsys->u.pci.addr.function); - if (pci) { - activePci = virPCIDeviceListSteal(driver->activePciHostdevs, pci); - if (activePci && - virPCIDeviceReset(activePci, driver->activePciHostdevs, - driver->inactivePciHostdevs) == 0) { - qemuReattachPciDevice(activePci, driver); - } else { - /* reset of the device failed, treat it as if it was returned */ - virPCIDeviceFree(activePci); - } - virPCIDeviceFree(pci); - } - virObjectUnlock(driver->activePciHostdevs); - virObjectUnlock(driver->inactivePciHostdevs); + hostdev_mgr = virHostdevManagerGetDefault(); + virHostdevReAttachPciHostdevs(hostdev_mgr, QEMU_DRIVER_NAME, + vm->def->name, &hostdev, 1); qemuDomainReleaseDeviceAddress(vm, hostdev->info, NULL); - virObjectUnref(cfg); } static void -qemuDomainRemoveUSBHostDevice(virQEMUDriverPtr driver, - virDomainObjPtr vm ATTRIBUTE_UNUSED, +qemuDomainRemoveUSBHostDevice(virDomainObjPtr vm, virDomainHostdevDefPtr hostdev) { - virDomainHostdevSubsysPtr subsys = &hostdev->source.subsys; - virUSBDevicePtr usb; - - usb = virUSBDeviceNew(subsys->u.usb.bus, subsys->u.usb.device, NULL); - if (usb) { - virObjectLock(driver->activeUsbHostdevs); - virUSBDeviceListDel(driver->activeUsbHostdevs, usb); - virObjectUnlock(driver->activeUsbHostdevs); - virUSBDeviceFree(usb); - } else { - VIR_WARN("Unable to find device %03d.%03d in list of used USB devices", - subsys->u.usb.bus, subsys->u.usb.device); - } + virHostdevManagerPtr hostdev_mgr; + + hostdev_mgr = virHostdevManagerGetDefault(); + virHostdevReAttachPciHostdevs(hostdev_mgr, QEMU_DRIVER_NAME, + vm->def->name, &hostdev, 1); } static void -qemuDomainRemoveSCSIHostDevice(virQEMUDriverPtr driver, - virDomainObjPtr vm, +qemuDomainRemoveSCSIHostDevice(virDomainObjPtr vm, virDomainHostdevDefPtr hostdev) { - qemuDomainReAttachHostScsiDevices(driver, vm->def->name, &hostdev, 1); + virHostdevManagerPtr hostdev_mgr; + + hostdev_mgr = virHostdevManagerGetDefault(); + virHostdevReAttachScsiHostdevs(hostdev_mgr, QEMU_DRIVER_NAME, + vm->def->name, &hostdev, 1); } static void @@ -2600,13 +2576,13 @@ qemuDomainRemoveHostDevice(virQEMUDriverPtr driver, switch ((enum virDomainHostdevSubsysType) hostdev->source.subsys.type) { case VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_PCI: - qemuDomainRemovePCIHostDevice(driver, vm, hostdev); + qemuDomainRemovePCIHostDevice(vm, hostdev); break; case VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_USB: - qemuDomainRemoveUSBHostDevice(driver, vm, hostdev); + qemuDomainRemoveUSBHostDevice(vm, hostdev); break; case VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_SCSI: - qemuDomainRemoveSCSIHostDevice(driver, vm, hostdev); + qemuDomainRemoveSCSIHostDevice(vm, hostdev); break; case VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_LAST: break; diff --git a/src/qemu/qemu_process.c b/src/qemu/qemu_process.c index c7cec5a..cb64f70 100644 --- a/src/qemu/qemu_process.c +++ b/src/qemu/qemu_process.c @@ -39,10 +39,10 @@ #include "qemu_capabilities.h" #include "qemu_monitor.h" #include "qemu_command.h" -#include "qemu_hostdev.h" #include "qemu_hotplug.h" #include "qemu_bridge_filter.h" #include "qemu_migration.h" +#include "qemu_conf.h" #include "datatypes.h" #include "virlog.h" @@ -65,6 +65,7 @@ #include "viratomic.h" #include "virnuma.h" #include "virstring.h" +#include "virhostdev.h" #define VIR_FROM_THIS VIR_FROM_QEMU @@ -3046,6 +3047,8 @@ qemuProcessReconnect(void *opaque) int reason; virQEMUDriverConfigPtr cfg; size_t i; + virHostdevManagerPtr hostdev_mgr; + unsigned int flags; memcpy(&oldjob, &data->oldjob, sizeof(oldjob)); @@ -3077,14 +3080,11 @@ qemuProcessReconnect(void *opaque) priv->agentError = true; } - if (qemuUpdateActivePciHostdevs(driver, obj->def) < 0) { - goto error; - } - - if (qemuUpdateActiveUsbHostdevs(driver, obj->def) < 0) - goto error; - if (qemuUpdateActiveScsiHostdevs(driver, obj->def) < 0) + hostdev_mgr = virHostdevManagerGetDefault(); + flags = VIR_SP_PCI_HOSTDEV | VIR_SP_USB_HOSTDEV | VIR_SP_SCSI_HOSTDEV; + if (virHostdevPrepareDomainHostdevs(hostdev_mgr, QEMU_DRIVER_NAME, + obj->def, flags) < 0) goto error; if (qemuConnectCgroup(driver, obj) < 0) @@ -3481,6 +3481,8 @@ int qemuProcessStart(virConnectPtr conn, unsigned int stop_flags; virQEMUDriverConfigPtr cfg; virCapsPtr caps = NULL; + virHostdevManagerPtr hostdev_mgr; + unsigned int hostdev_flags; /* Okay, these are just internal flags, * but doesn't hurt to check */ @@ -3559,7 +3561,14 @@ int qemuProcessStart(virConnectPtr conn, /* Must be run before security labelling */ VIR_DEBUG("Preparing host devices"); - if (qemuPrepareHostDevices(driver, vm->def, !migrateFrom) < 0) + hostdev_mgr = virHostdevManagerGetDefault(); + hostdev_flags = VIR_SP_PCI_HOSTDEV | VIR_SP_USB_HOSTDEV | VIR_SP_SCSI_HOSTDEV; + if (!migrateFrom) + hostdev_flags |= VIR_COLD_BOOT; + if (!cfg->relaxedACS) + hostdev_flags |= VIR_STRICT_ACS_CHECK; + if (virHostdevPrepareDomainHostdevs(hostdev_mgr, QEMU_DRIVER_NAME, + vm->def, hostdev_flags) < 0) goto cleanup; VIR_DEBUG("Preparing chr devices"); @@ -4101,6 +4110,8 @@ void qemuProcessStop(virQEMUDriverPtr driver, char *timestamp; char ebuf[1024]; virQEMUDriverConfigPtr cfg = virQEMUDriverGetConfig(driver); + virHostdevManagerPtr hostdev_mgr; + unsigned int hostdev_flags; VIR_DEBUG("Shutting down VM '%s' pid=%d flags=%x", vm->def->name, vm->pid, flags); @@ -4243,7 +4254,10 @@ void qemuProcessStop(virQEMUDriverPtr driver, priv->ccwaddrs = NULL; } - qemuDomainReAttachHostDevices(driver, vm->def); + hostdev_mgr = virHostdevManagerGetDefault(); + hostdev_flags = VIR_SP_PCI_HOSTDEV | VIR_SP_USB_HOSTDEV | VIR_SP_SCSI_HOSTDEV; + virHostdevReAttachDomainHostdevs(hostdev_mgr, QEMU_DRIVER_NAME, + vm->def, hostdev_flags); def = vm->def; for (i = 0; i < def->nnets; i++) { -- 1.6.0.2