Although there already was an effort (b620bdee) to replace vshPrint occurrences
with vshPrintExtra due to '--quiet' flag, there were still some leftovers. So
this patch fixes them, hopefully for good.
Resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=1356881
Signed-off-by: Erik Skultety <eskultet(a)redhat.com>
---
tools/virsh-domain.c | 73 +++++++++++++++++++++++++------------------------
tools/virsh-edit.c | 4 +--
tools/virsh-interface.c | 28 +++++++++----------
tools/virsh-network.c | 37 +++++++++++++------------
tools/virsh-nwfilter.c | 6 ++--
tools/virsh-pool.c | 21 +++++++-------
tools/virsh-snapshot.c | 20 +++++++-------
tools/virsh-volume.c | 12 ++++----
tools/virt-admin.c | 4 +--
9 files changed, 104 insertions(+), 101 deletions(-)
diff --git a/tools/virsh-domain.c b/tools/virsh-domain.c
index 184f64d..91308e8 100644
--- a/tools/virsh-domain.c
+++ b/tools/virsh-domain.c
@@ -2080,9 +2080,9 @@ cmdBlockCommit(vshControl *ctl, const vshCmd *cmd)
if (!blocking) {
if (active)
- vshPrint(ctl, "%s", _("Active Block Commit started"));
+ vshPrintExtra(ctl, "%s", _("Active Block Commit
started"));
else
- vshPrint(ctl, "%s", _("Block Commit started"));
+ vshPrintExtra(ctl, "%s", _("Block Commit started"));
ret = true;
goto cleanup;
@@ -2094,12 +2094,12 @@ cmdBlockCommit(vshControl *ctl, const vshCmd *cmd)
goto cleanup;
case VIR_DOMAIN_BLOCK_JOB_CANCELED:
- vshPrint(ctl, "\n%s", _("Commit aborted"));
+ vshPrintExtra(ctl, "\n%s", _("Commit aborted"));
goto cleanup;
break;
case VIR_DOMAIN_BLOCK_JOB_FAILED:
- vshPrint(ctl, "\n%s", _("Commit failed"));
+ vshPrintExtra(ctl, "\n%s", _("Commit failed"));
goto cleanup;
break;
@@ -2116,19 +2116,20 @@ cmdBlockCommit(vshControl *ctl, const vshCmd *cmd)
goto cleanup;
}
- vshPrint(ctl, "\n%s", _("Successfully pivoted"));
+ vshPrintExtra(ctl, "\n%s", _("Successfully pivoted"));
} else if (finish) {
if (virDomainBlockJobAbort(dom, path, abort_flags) < 0) {
vshError(ctl, _("failed to finish job for disk %s"), path);
goto cleanup;
}
- vshPrint(ctl, "\n%s", _("Commit complete, overlay image
kept"));
+ vshPrintExtra(ctl, "\n%s", _("Commit complete, overlay "
+ "image kept"));
} else {
- vshPrint(ctl, "\n%s", _("Now in synchronized phase"));
+ vshPrintExtra(ctl, "\n%s", _("Now in synchronized
phase"));
}
} else {
- vshPrint(ctl, "\n%s", _("Commit complete"));
+ vshPrintExtra(ctl, "\n%s", _("Commit complete"));
}
ret = true;
@@ -2392,7 +2393,7 @@ cmdBlockCopy(vshControl *ctl, const vshCmd *cmd)
}
if (!blocking) {
- vshPrint(ctl, "%s", _("Block Copy started"));
+ vshPrintExtra(ctl, "%s", _("Block Copy started"));
ret = true;
goto cleanup;
}
@@ -2403,12 +2404,12 @@ cmdBlockCopy(vshControl *ctl, const vshCmd *cmd)
goto cleanup;
case VIR_DOMAIN_BLOCK_JOB_CANCELED:
- vshPrint(ctl, "\n%s", _("Copy aborted"));
+ vshPrintExtra(ctl, "\n%s", _("Copy aborted"));
goto cleanup;
break;
case VIR_DOMAIN_BLOCK_JOB_FAILED:
- vshPrint(ctl, "\n%s", _("Copy failed"));
+ vshPrintExtra(ctl, "\n%s", _("Copy failed"));
goto cleanup;
break;
@@ -2424,16 +2425,16 @@ cmdBlockCopy(vshControl *ctl, const vshCmd *cmd)
goto cleanup;
}
- vshPrint(ctl, "\n%s", _("Successfully pivoted"));
+ vshPrintExtra(ctl, "\n%s", _("Successfully pivoted"));
} else if (finish) {
if (virDomainBlockJobAbort(dom, path, abort_flags) < 0) {
vshError(ctl, _("failed to finish job for disk %s"), path);
goto cleanup;
}
- vshPrint(ctl, "\n%s", _("Successfully copied"));
+ vshPrintExtra(ctl, "\n%s", _("Successfully copied"));
} else {
- vshPrint(ctl, "\n%s", _("Now in mirroring phase"));
+ vshPrintExtra(ctl, "\n%s", _("Now in mirroring phase"));
}
ret = true;
@@ -2571,7 +2572,7 @@ virshBlockJobInfo(vshControl *ctl,
if (rc == 0) {
if (!raw)
- vshPrint(ctl, _("No current block job for %s"), path);
+ vshPrintExtra(ctl, _("No current block job for %s"), path);
ret = true;
goto cleanup;
}
@@ -2802,7 +2803,7 @@ cmdBlockPull(vshControl *ctl, const vshCmd *cmd)
}
if (!blocking) {
- vshPrint(ctl, "%s", _("Block Pull started"));
+ vshPrintExtra(ctl, "%s", _("Block Pull started"));
ret = true;
goto cleanup;
}
@@ -2813,18 +2814,18 @@ cmdBlockPull(vshControl *ctl, const vshCmd *cmd)
goto cleanup;
case VIR_DOMAIN_BLOCK_JOB_CANCELED:
- vshPrint(ctl, "\n%s", _("Pull aborted"));
+ vshPrintExtra(ctl, "\n%s", _("Pull aborted"));
goto cleanup;
break;
case VIR_DOMAIN_BLOCK_JOB_FAILED:
- vshPrint(ctl, "\n%s", _("Pull failed"));
+ vshPrintExtra(ctl, "\n%s", _("Pull failed"));
goto cleanup;
break;
case VIR_DOMAIN_BLOCK_JOB_READY:
case VIR_DOMAIN_BLOCK_JOB_COMPLETED:
- vshPrint(ctl, "\n%s", _("Pull complete"));
+ vshPrintExtra(ctl, "\n%s", _("Pull complete"));
break;
}
@@ -4563,18 +4564,18 @@ cmdSaveImageEdit(vshControl *ctl, const vshCmd *cmd)
#define EDIT_GET_XML \
virDomainSaveImageGetXMLDesc(priv->conn, file, getxml_flags)
-#define EDIT_NOT_CHANGED \
- do { \
- vshPrint(ctl, _("Saved image %s XML configuration " \
- "not changed.\n"), file); \
- ret = true; \
- goto edit_cleanup; \
+#define EDIT_NOT_CHANGED \
+ do { \
+ vshPrintExtra(ctl, _("Saved image %s XML configuration " \
+ "not changed.\n"), file); \
+ ret = true; \
+ goto edit_cleanup; \
} while (0)
#define EDIT_DEFINE \
(virDomainSaveImageDefineXML(priv->conn, file, doc_edited, define_flags) == 0)
#include "virsh-edit.c"
- vshPrint(ctl, _("State file %s edited.\n"), file);
+ vshPrintExtra(ctl, _("State file %s edited.\n"), file);
ret = true;
cleanup:
@@ -12041,12 +12042,12 @@ cmdEdit(vshControl *ctl, const vshCmd *cmd)
define_flags &= ~VIR_DOMAIN_DEFINE_VALIDATE;
#define EDIT_GET_XML virDomainGetXMLDesc(dom, query_flags)
-#define EDIT_NOT_CHANGED \
- do { \
- vshPrint(ctl, _("Domain %s XML configuration not changed.\n"), \
- virDomainGetName(dom)); \
- ret = true; \
- goto edit_cleanup; \
+#define EDIT_NOT_CHANGED \
+ do { \
+ vshPrintExtra(ctl, _("Domain %s XML configuration not changed.\n"), \
+ virDomainGetName(dom)); \
+ ret = true; \
+ goto edit_cleanup; \
} while (0)
#define EDIT_DEFINE \
(dom_edited = virshDomainDefine(priv->conn, doc_edited, define_flags))
@@ -12058,8 +12059,8 @@ cmdEdit(vshControl *ctl, const vshCmd *cmd)
#include "virsh-edit.c"
#undef EDIT_RELAX
- vshPrint(ctl, _("Domain %s XML configuration edited.\n"),
- virDomainGetName(dom_edited));
+ vshPrintExtra(ctl, _("Domain %s XML configuration edited.\n"),
+ virDomainGetName(dom_edited));
ret = true;
@@ -13177,7 +13178,7 @@ cmdDomFSFreeze(vshControl *ctl, const vshCmd *cmd)
goto cleanup;
}
- vshPrint(ctl, _("Froze %d filesystem(s)\n"), ret);
+ vshPrintExtra(ctl, _("Froze %d filesystem(s)\n"), ret);
cleanup:
VIR_FREE(mountpoints);
@@ -13230,7 +13231,7 @@ cmdDomFSThaw(vshControl *ctl, const vshCmd *cmd)
goto cleanup;
}
- vshPrint(ctl, _("Thawed %d filesystem(s)\n"), ret);
+ vshPrintExtra(ctl, _("Thawed %d filesystem(s)\n"), ret);
cleanup:
VIR_FREE(mountpoints);
diff --git a/tools/virsh-edit.c b/tools/virsh-edit.c
index 1b39cb7..16d6705 100644
--- a/tools/virsh-edit.c
+++ b/tools/virsh-edit.c
@@ -25,8 +25,8 @@
* EDIT_NOT_CHANGED - this action is taken if the XML wasn't changed.
* Note, that you don't want to jump to cleanup but edit_cleanup label
* where temporary variables are free()-d and temporary file is deleted:
- * #define EDIT_NOT_CHANGED vshPrint(ctl, _("Domain %s XML not changed"),
\
- * virDomainGetName(dom)); \
+ * #define EDIT_NOT_CHANGED vshPrintExtra (ctl, _("Domain %s XML not
changed"), \
+ * virDomainGetName(dom)); \
* ret = true; goto edit_cleanup;
* Note that this is a statement.
*
diff --git a/tools/virsh-interface.c b/tools/virsh-interface.c
index 7274527..9f7d1bd 100644
--- a/tools/virsh-interface.c
+++ b/tools/virsh-interface.c
@@ -125,19 +125,19 @@ cmdInterfaceEdit(vshControl *ctl, const vshCmd *cmd)
goto cleanup;
#define EDIT_GET_XML virInterfaceGetXMLDesc(iface, flags)
-#define EDIT_NOT_CHANGED \
- do { \
- vshPrint(ctl, _("Interface %s XML configuration not changed.\n"), \
- virInterfaceGetName(iface)); \
- ret = true; \
- goto edit_cleanup; \
+#define EDIT_NOT_CHANGED \
+ do { \
+ vshPrintExtra(ctl, _("Interface %s XML configuration not changed.\n"),
\
+ virInterfaceGetName(iface)); \
+ ret = true; \
+ goto edit_cleanup; \
} while (0)
#define EDIT_DEFINE \
(iface_edited = virInterfaceDefineXML(priv->conn, doc_edited, 0))
#include "virsh-edit.c"
- vshPrint(ctl, _("Interface %s XML configuration edited.\n"),
- virInterfaceGetName(iface_edited));
+ vshPrintExtra(ctl, _("Interface %s XML configuration edited.\n"),
+ virInterfaceGetName(iface_edited));
ret = true;
@@ -969,8 +969,8 @@ cmdInterfaceBridge(vshControl *ctl, const vshCmd *cmd)
goto cleanup;
}
- vshPrint(ctl, _("Created bridge %s with attached device %s\n"),
- br_name, if_name);
+ vshPrintExtra(ctl, _("Created bridge %s with attached device %s\n"),
+ br_name, if_name);
/* start it up unless requested not to */
if (!nostart) {
@@ -978,7 +978,7 @@ cmdInterfaceBridge(vshControl *ctl, const vshCmd *cmd)
vshError(ctl, _("Failed to start bridge interface %s"), br_name);
goto cleanup;
}
- vshPrint(ctl, _("Bridge interface %s started\n"), br_name);
+ vshPrintExtra(ctl, _("Bridge interface %s started\n"), br_name);
}
ret = true;
@@ -1170,8 +1170,8 @@ cmdInterfaceUnbridge(vshControl *ctl, const vshCmd *cmd)
goto cleanup;
}
- vshPrint(ctl, _("Device %s un-attached from bridge %s\n"),
- if_name, br_name);
+ vshPrintExtra(ctl, _("Device %s un-attached from bridge %s\n"),
+ if_name, br_name);
/* unless requested otherwise, undefine the bridge device */
if (!nostart) {
@@ -1179,7 +1179,7 @@ cmdInterfaceUnbridge(vshControl *ctl, const vshCmd *cmd)
vshError(ctl, _("Failed to start interface %s"), if_name);
goto cleanup;
}
- vshPrint(ctl, _("Interface %s started\n"), if_name);
+ vshPrintExtra(ctl, _("Interface %s started\n"), if_name);
}
ret = true;
diff --git a/tools/virsh-network.c b/tools/virsh-network.c
index 431a750..eacc277 100644
--- a/tools/virsh-network.c
+++ b/tools/virsh-network.c
@@ -977,20 +977,21 @@ cmdNetworkUpdate(vshControl *ctl, const vshCmd *cmd)
if (config) {
if (live)
- vshPrint(ctl, _("Updated network %s persistent config and live
state"),
- virNetworkGetName(network));
+ vshPrintExtra(ctl, _("Updated network %s persistent config and "
+ "live state"),
+ virNetworkGetName(network));
else
- vshPrint(ctl, _("Updated network %s persistent config"),
- virNetworkGetName(network));
+ vshPrintExtra(ctl, _("Updated network %s persistent config"),
+ virNetworkGetName(network));
} else if (live) {
- vshPrint(ctl, _("Updated network %s live state"),
- virNetworkGetName(network));
+ vshPrintExtra(ctl, _("Updated network %s live state"),
+ virNetworkGetName(network));
} else if (virNetworkIsActive(network)) {
- vshPrint(ctl, _("Updated network %s live state"),
- virNetworkGetName(network));
+ vshPrintExtra(ctl, _("Updated network %s live state"),
+ virNetworkGetName(network));
} else {
- vshPrint(ctl, _("Updated network %s persistent config"),
- virNetworkGetName(network));
+ vshPrintExtra(ctl, _("Updated network %s persistent config"),
+ virNetworkGetName(network));
}
ret = true;
@@ -1089,19 +1090,19 @@ cmdNetworkEdit(vshControl *ctl, const vshCmd *cmd)
goto cleanup;
#define EDIT_GET_XML virshNetworkGetXMLDesc(network)
-#define EDIT_NOT_CHANGED \
- do { \
- vshPrint(ctl, _("Network %s XML configuration not changed.\n"), \
- virNetworkGetName(network)); \
- ret = true; \
- goto edit_cleanup; \
+#define EDIT_NOT_CHANGED \
+ do { \
+ vshPrintExtra(ctl, _("Network %s XML configuration not changed.\n"), \
+ virNetworkGetName(network)); \
+ ret = true; \
+ goto edit_cleanup; \
} while (0)
#define EDIT_DEFINE \
(network_edited = virNetworkDefineXML(priv->conn, doc_edited))
#include "virsh-edit.c"
- vshPrint(ctl, _("Network %s XML configuration edited.\n"),
- virNetworkGetName(network_edited));
+ vshPrintExtra(ctl, _("Network %s XML configuration edited.\n"),
+ virNetworkGetName(network_edited));
ret = true;
diff --git a/tools/virsh-nwfilter.c b/tools/virsh-nwfilter.c
index daf58a5..d4a88b2 100644
--- a/tools/virsh-nwfilter.c
+++ b/tools/virsh-nwfilter.c
@@ -416,7 +416,7 @@ cmdNWFilterEdit(vshControl *ctl, const vshCmd *cmd)
#define EDIT_GET_XML virNWFilterGetXMLDesc(nwfilter, 0)
#define EDIT_NOT_CHANGED \
do { \
- vshPrint(ctl, _("Network filter %s XML " \
+ vshPrintExtra(ctl, _("Network filter %s XML " \
"configuration not changed.\n"), \
virNWFilterGetName(nwfilter)); \
ret = true; \
@@ -426,8 +426,8 @@ cmdNWFilterEdit(vshControl *ctl, const vshCmd *cmd)
(nwfilter_edited = virNWFilterDefineXML(priv->conn, doc_edited))
#include "virsh-edit.c"
- vshPrint(ctl, _("Network filter %s XML configuration edited.\n"),
- virNWFilterGetName(nwfilter_edited));
+ vshPrintExtra(ctl, _("Network filter %s XML configuration edited.\n"),
+ virNWFilterGetName(nwfilter_edited));
ret = true;
diff --git a/tools/virsh-pool.c b/tools/virsh-pool.c
index 3bc96b2..7118a6c 100644
--- a/tools/virsh-pool.c
+++ b/tools/virsh-pool.c
@@ -1384,8 +1384,9 @@ cmdPoolList(vshControl *ctl, const vshCmd *cmd ATTRIBUTE_UNUSED)
goto cleanup;
/* Display the header */
- vshPrint(ctl, outputStr, _("Name"), _("State"),
_("Autostart"),
- _("Persistent"), _("Capacity"),
_("Allocation"), _("Available"));
+ vshPrintExtra(ctl, outputStr, _("Name"), _("State"),
_("Autostart"),
+ _("Persistent"), _("Capacity"),
_("Allocation"),
+ _("Available"));
for (i = nameStrLength + stateStrLength + autostartStrLength
+ persistStrLength + capStrLength
+ allocStrLength + availStrLength
@@ -1865,19 +1866,19 @@ cmdPoolEdit(vshControl *ctl, const vshCmd *cmd)
}
#define EDIT_GET_XML virStoragePoolGetXMLDesc(pool, flags)
-#define EDIT_NOT_CHANGED \
- do { \
- vshPrint(ctl, _("Pool %s XML configuration not changed.\n"), \
- virStoragePoolGetName(pool)); \
- ret = true; \
- goto edit_cleanup; \
+#define EDIT_NOT_CHANGED \
+ do { \
+ vshPrintExtra(ctl, _("Pool %s XML configuration not changed.\n"), \
+ virStoragePoolGetName(pool)); \
+ ret = true; \
+ goto edit_cleanup; \
} while (0)
#define EDIT_DEFINE \
(pool_edited = virStoragePoolDefineXML(priv->conn, doc_edited, 0))
#include "virsh-edit.c"
- vshPrint(ctl, _("Pool %s XML configuration edited.\n"),
- virStoragePoolGetName(pool_edited));
+ vshPrintExtra(ctl, _("Pool %s XML configuration edited.\n"),
+ virStoragePoolGetName(pool_edited));
ret = true;
diff --git a/tools/virsh-snapshot.c b/tools/virsh-snapshot.c
index 95db096..e4d0df7 100644
--- a/tools/virsh-snapshot.c
+++ b/tools/virsh-snapshot.c
@@ -556,16 +556,16 @@ cmdSnapshotEdit(vshControl *ctl, const vshCmd *cmd)
#define EDIT_GET_XML \
virDomainSnapshotGetXMLDesc(snapshot, getxml_flags)
-#define EDIT_NOT_CHANGED \
- do { \
- /* Depending on flags, we re-edit even if XML is unchanged. */ \
- if (!(define_flags & VIR_DOMAIN_SNAPSHOT_CREATE_CURRENT)) { \
- vshPrint(ctl, \
- _("Snapshot %s XML configuration not changed.\n"), \
- name); \
- ret = true; \
- goto edit_cleanup; \
- } \
+#define EDIT_NOT_CHANGED \
+ do { \
+ /* Depending on flags, we re-edit even if XML is unchanged. */ \
+ if (!(define_flags & VIR_DOMAIN_SNAPSHOT_CREATE_CURRENT)) { \
+ vshPrintExtra(ctl, \
+ _("Snapshot %s XML configuration not changed.\n"), \
+ name); \
+ ret = true; \
+ goto edit_cleanup; \
+ } \
} while (0)
#define EDIT_DEFINE \
(strstr(doc, "<state>disk-snapshot</state>") ? \
diff --git a/tools/virsh-volume.c b/tools/virsh-volume.c
index 8831f44..96b4a7b 100644
--- a/tools/virsh-volume.c
+++ b/tools/virsh-volume.c
@@ -1123,10 +1123,10 @@ cmdVolResize(vshControl *ctl, const vshCmd *cmd)
}
if (virStorageVolResize(vol, capacity, flags) == 0) {
- vshPrint(ctl,
- delta ? _("Size of volume '%s' successfully changed by
%s\n")
- : _("Size of volume '%s' successfully changed to
%s\n"),
- virStorageVolGetName(vol), capacityStr);
+ vshPrintExtra(ctl,
+ delta ? _("Size of volume '%s' successfully changed by
%s\n")
+ : _("Size of volume '%s' successfully changed to
%s\n"),
+ virStorageVolGetName(vol), capacityStr);
ret = true;
} else {
vshError(ctl,
@@ -1502,8 +1502,8 @@ cmdVolList(vshControl *ctl, const vshCmd *cmd ATTRIBUTE_UNUSED)
goto cleanup;
/* Display the header */
- vshPrint(ctl, outputStr, _("Name"), _("Path"),
_("Type"),
- ("Capacity"), _("Allocation"));
+ vshPrintExtra(ctl, outputStr, _("Name"), _("Path"),
_("Type"),
+ _("Capacity"), _("Allocation"));
for (i = nameStrLength + pathStrLength + typeStrLength
+ capStrLength + allocStrLength
+ 10; i > 0; i--)
diff --git a/tools/virt-admin.c b/tools/virt-admin.c
index b1e0c49..70b0e51 100644
--- a/tools/virt-admin.c
+++ b/tools/virt-admin.c
@@ -391,8 +391,8 @@ cmdSrvList(vshControl *ctl, const vshCmd *cmd ATTRIBUTE_UNUSED)
goto cleanup;
}
- printf(" %-5s %-15s\n", "Id", "Name");
- printf("---------------\n");
+ vshPrintExtra(ctl, " %-5s %-15s\n", "Id", "Name");
+ vshPrintExtra(ctl, "---------------\n");
for (i = 0; i < nsrvs; i++)
vshPrint(ctl, " %-5zu %-15s\n", i, virAdmServerGetName(srvs[i]));
--
2.5.5