[libvirt] [PATCH for 5.1.0] news: Update for 5.1.0 release
Not exhaustive list of new features, improvements and bugfixes. Signed-off-by: Michal Privoznik <mprivozn@redhat.com> --- docs/news.xml | 201 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 201 insertions(+) diff --git a/docs/news.xml b/docs/news.xml index 9c5ae7e8a3..813f1a93e3 100644 --- a/docs/news.xml +++ b/docs/news.xml @@ -69,8 +69,104 @@ Model Specific Registers (MSRs) reads and writes. </description> </change> + <change> + <summary> + qemu: add support for encrypted VNC TLS keys + </summary> + <description> + Use the password stored in the secret driver under the uuid + specified by the vnc_tls_x509_secret_uuid option in qemu.conf. + </description> + </change> + <change> + <summary> + Add storage pool namespace options + </summary> + <description> + Allow for adjustment of RBD configuration options via Storage + Pool XML Namespace adjustments. + </description> + </change> + <change> + <summary> + qemu: Add support for setting post-copy migration bandwidth + </summary> + <description> + Users can now limit the bandwidth of post-copy migration, e.g. + via <code>virsh migrate --postcopy-bandwidth</code>. + </description> + </change> </section> <section title="Improvements"> + <change> + <summary> + Create private chains for virtual network firewall rules + </summary> + <description> + Historically firewall rules for virtual networks were added + straight into the base chains. This works but has a number of + bugs and design limitations. To address them, libvirt now puts + firewall rules into its own chains. + </description> + </change> + <change> + <summary> + Detect CEPH and GPFS as shared FS + </summary> + <description> + When starting a migration libvirt does some sanity checks to + make sure domain will be able to run on destination. One of + requirements is that disk has to either be migrated too or + live on network filesystem. CEPH and GPFS weren't detected as + a network filesystem. + </description> + </change> + <change> + <summary> + Advertise network MTU via DHCP when specified + </summary> + <description> + If network MTU is set and the network has DHCP enabled, + advertise the MTU in DHCP transaction too so that clients can + adjust their link accordingly. + </description> + </change> + <change> + <summary> + Allocate qemu memory at the configured NUMA nodes from start + </summary> + <description> + Libvirt used to just start qemu, let it allocate memory for + the guest and then use CGroups to move the memory to + configured NUMA nodes. This is suboptimal as huge chunks of + memory have to be moved. Moreover, this relies on ability to + move memory later which is not always true. Set process + affinity corretly from the start so that memory is allocated + on the configured nodes from the beginning. + </description> + </change> + <change> + <summary> + Support for newer wireshark + </summary> + <description> + Wireshark supports out of tree builds of dissectors since its + 2.5.0 release. Adapt libvirt to that. This affects minimal + required version then too. + </description> + </change> + <change> + <summary> + More use of VIR_AUTOFREE() and friends + </summary> + <description> + Usuaully, this would be viewed as an internal change that + should not concern users. However, since libvirt is written in + memory unsafe language some memory leaks might have been + actually fixed by using VIR_AUTOFREE(). It is definitely step + towards defensive programming. + </description> + </change> </section> <section title="Bug fixes"> <change> @@ -133,6 +229,111 @@ attribute of the network bridge element). </description> </change> + <change> + <summary> + Refresh block jobs on daemon restart + </summary> + <description> + In case the daemon is restarted it now fetches new state of + blockjobs. This means that libvirt does not lose track of + block jobs anymore. + </description> + </change> + <change> + <summary> + qemu: Fix i6300esb watchdog hotplug on Q35 + </summary> + <description> + Due to a bug libvirt was not allocating PCI address for + watchdog device nor it was telling it to qemu. This lead qemu + to chose one (the lowest one) which might not be hotpluggable. + </description> + </change> + <change> + <summary> + lxc: Don't reboot host on virDomainReboot + </summary> + <description> + If the container is really a simple one (init is just bash and + the whole root is passed through) then virDomainReboot and + virDomainShutdown would reboot or shutdown the host. The + solution is to use different method to reboot or shutdown the + container in that case (e.g. signal). + </description> + </change> + <change> + <summary> + rpc: Various stream fixes + </summary> + <description> + One particular race was fixed, one locking problem and error + reporting from streams was made better. + </description> + </change> + <change> + <summary> + qemu: Fix guestfwd hotplug/hotunplug + </summary> + <description> + Unaware to libvirt developers whether somebody actually uses + guestfwd, it's hotplug and hotunplug was fixed. Libvirt used + to use incorrect monitor command. + </description> + </change> + <change> + <summary> + qemu: Forbid cdroms on virtio bus + </summary> + <description> + Attempting to create an empty virtio-blk drive or attempting + to eject it results into an error. Forbid configurations + where users would attempt to use cdroms in virtio bus. + </description> + </change> + <change> + <summary> + qemu: Use 'raw' for 'volume' disks without format + </summary> + <description> + Storage pools might want to specify format of the image when + translating the volume thus libvirt can't add any default + format when parsing the XML. Add an explicit format when + starting the VM and format is not present neither by user + specifying it nor by the storage pool translation function. + </description> + </change> + <change> + <summary> + qemu: domain: Assume 'raw' default storage format also for network storage + </summary> + <description> + Post parse callback adds the 'raw' type only for local files. + Remote files can also have backing store (even local) so we + should do this also for network backed storage. + </description> + </change> + <change> + <summary> + qemu: Fix block job progress reporting and advocate for READY event + </summary> + <description> + In some cases qemu can get to 100% and still not reach the + synchronised phase. Initiating a pivot in that case will fail. + Therefore it is strongly adviced to wait for + VIR_DOMAIN_BLOCK_JOB_READY event which does not suffer from + this problem. + </description> + </change> + <change> + <summary> + qemu: Don't format image properties for empty -drive + </summary> + <description> + If a -drive has no image, using image properties makes qemu + whine that they should not be used. Stop formatting attributes + like cache/readonly/... in that case. + </description> + </change> </section> </release> <release version="v5.0.0" date="2019-01-15"> -- 2.19.2
On 2/28/19 5:43 AM, Michal Privoznik wrote:
Not exhaustive list of new features, improvements and bugfixes.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> --- docs/news.xml | 201 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 201 insertions(+)
diff --git a/docs/news.xml b/docs/news.xml index 9c5ae7e8a3..813f1a93e3 100644 --- a/docs/news.xml +++ b/docs/news.xml @@ -69,8 +69,104 @@ Model Specific Registers (MSRs) reads and writes. </description> </change> + <change> + <summary> + qemu: add support for encrypted VNC TLS keys + </summary> + <description> + Use the password stored in the secret driver under the uuid + specified by the vnc_tls_x509_secret_uuid option in qemu.conf. + </description> + </change>
Is this a new feature or improvement to current support?
+ <change> + <summary> + Add storage pool namespace options + </summary> + <description> + Allow for adjustment of RBD configuration options via Storage + Pool XML Namespace adjustments. + </description> + </change>
I deliberately left this out primarily because of the position that namespace options were not "standard" or "supported" for guests. It's more than just RDB too, one could use namespaces to add more mount options as well. Still these are only documented within the storage pool xml page (formatstorage).
+ <change> + <summary> + qemu: Add support for setting post-copy migration bandwidth + </summary> + <description> + Users can now limit the bandwidth of post-copy migration, e.g. + via <code>virsh migrate --postcopy-bandwidth</code>. + </description> + </change> </section> <section title="Improvements"> + <change> + <summary> + Create private chains for virtual network firewall rules + </summary> + <description> + Historically firewall rules for virtual networks were added + straight into the base chains. This works but has a number of + bugs and design limitations. To address them, libvirt now puts + firewall rules into its own chains. + </description> + </change> + <change> + <summary> + Detect CEPH and GPFS as shared FS + </summary> + <description> + When starting a migration libvirt does some sanity checks to + make sure domain will be able to run on destination. One of
"on the destination" "One of the"
+ requirements is that disk has to either be migrated too or
"that the disk"
+ live on network filesystem. CEPH and GPFS weren't detected as
s/live on/be accessible from a/
+ a network filesystem. + </description> + </change> + <change> + <summary> + Advertise network MTU via DHCP when specified + </summary> + <description> + If network MTU is set and the network has DHCP enabled, + advertise the MTU in DHCP transaction too so that clients can + adjust their link accordingly. + </description> + </change> + <change> + <summary> + Allocate qemu memory at the configured NUMA nodes from start
QEMU (*repeats many times - other than qemu: XXX, I think they all should be changed).
+ </summary> + <description> + Libvirt used to just start qemu, let it allocate memory for + the guest and then use CGroups to move the memory to
the guest, and then
+ configured NUMA nodes. This is suboptimal as huge chunks of + memory have to be moved. Moreover, this relies on ability to + move memory later which is not always true. Set process
A change was made to set process...
+ affinity corretly from the start so that memory is allocated
correctly
+ on the configured nodes from the beginning. + </description> + </change> + <change> + <summary> + Support for newer wireshark
Should this be Wireshark ?? It's a product, right?
+ </summary> + <description> + Wireshark supports out of tree builds of dissectors since its + 2.5.0 release. Adapt libvirt to that. This affects minimal + required version then too.
Adapt libvirt to use the more recent release requiring a source build configuration of libvirt --with-wireshark to upgrade to the more recent version. [or something similar]
+ </description> + </change> + <change> + <summary> + More use of VIR_AUTOFREE() and friends + </summary> + <description> + Usuaully, this would be viewed as an internal change that + should not concern users. However, since libvirt is written in + memory unsafe language some memory leaks might have been + actually fixed by using VIR_AUTOFREE(). It is definitely step + towards defensive programming. + </description> + </change>
Hmm.. This I thought would be characterized as cleanups that we don't advertise. It's not a feature or improvement, just something w/ code motion or alteration to make use of existing features. I think the whole <description> section would cause someone to wonder whether previous versions of libvirt had leaks. I'd just drop the whole thing. If it had to be kept, please sanitize the description to not make it seem like those changes actually removed "many" memory leaks. A few were fixed, but I think those were edge or error conditions.
</section> <section title="Bug fixes"> <change> @@ -133,6 +229,111 @@ attribute of the network bridge element). </description> </change> + <change> + <summary> + Refresh block jobs on daemon restart + </summary> + <description> + In case the daemon is restarted it now fetches new state of + blockjobs. This means that libvirt does not lose track of + block jobs anymore.
s/anymore//
+ </description> + </change> + <change> + <summary> + qemu: Fix i6300esb watchdog hotplug on Q35 + </summary> + <description> + Due to a bug libvirt was not allocating PCI address for + watchdog device nor it was telling it to qemu. This lead qemu + to chose one (the lowest one) which might not be hotpluggable.
Ensure that libvirt allocates a PCI address for the device so that QEMU did not default to an address that would not allow for device hotplug.
+ </description> + </change> + <change> + <summary> + lxc: Don't reboot host on virDomainReboot + </summary> + <description> + If the container is really a simple one (init is just bash and + the whole root is passed through) then virDomainReboot and + virDomainShutdown would reboot or shutdown the host. The + solution is to use different method to reboot or shutdown the + container in that case (e.g. signal). + </description> + </change> + <change> + <summary> + rpc: Various stream fixes + </summary> + <description> + One particular race was fixed, one locking problem and error + reporting from streams was made better. + </description> + </change> + <change> + <summary> + qemu: Fix guestfwd hotplug/hotunplug + </summary> + <description> + Unaware to libvirt developers whether somebody actually uses + guestfwd, it's hotplug and hotunplug was fixed. Libvirt used + to use incorrect monitor command.
Fixed the generation of the guestfwd hotplug/unplug command sent to QEMU to match the syntax used when creating the initial command line.
+ </description> + </change> + <change> + <summary> + qemu: Forbid cdroms on virtio bus + </summary> + <description> + Attempting to create an empty virtio-blk drive or attempting + to eject it results into an error. Forbid configurations + where users would attempt to use cdroms in virtio bus. + </description> + </change> + <change> + <summary> + qemu: Use 'raw' for 'volume' disks without format + </summary> + <description> + Storage pools might want to specify format of the image when + translating the volume thus libvirt can't add any default + format when parsing the XML. Add an explicit format when + starting the VM and format is not present neither by user + specifying it nor by the storage pool translation function. + </description> + </change> + <change> + <summary> + qemu: domain: Assume 'raw' default storage format also for network storage + </summary> + <description> + Post parse callback adds the 'raw' type only for local files. + Remote files can also have backing store (even local) so we + should do this also for network backed storage. + </description> + </change> + <change> + <summary> + qemu: Fix block job progress reporting and advocate for READY event + </summary> + <description> + In some cases qemu can get to 100% and still not reach the + synchronised phase. Initiating a pivot in that case will fail.
synchronized
+ Therefore it is strongly adviced to wait for + VIR_DOMAIN_BLOCK_JOB_READY event which does not suffer from + this problem. + </description> + </change> + <change> + <summary> + qemu: Don't format image properties for empty -drive + </summary> + <description> + If a -drive has no image, using image properties makes qemu + whine that they should not be used. Stop formatting attributes + like cache/readonly/... in that case.
Can we avoid using "whine"... "If a -drive has no image, then formatting attributes such as cache, readonly, etc. would cause errors to be reported from QEMU. This was fixed by not supplying the attributes for devices without an image." [I'm sure that can be wordsmithed too]
+ </description> + </change> </section> </release> <release version="v5.0.0" date="2019-01-15">
Assuming some level of adjustment and I'm sure you'll get more opinions anyway ;-)... Thanks for not forgetting this! Reviewed-by: John Ferlan <jferlan@redhat.com> John
On 2/28/19 1:23 PM, John Ferlan wrote:
On 2/28/19 5:43 AM, Michal Privoznik wrote:
Not exhaustive list of new features, improvements and bugfixes.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> --- docs/news.xml | 201 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 201 insertions(+)
diff --git a/docs/news.xml b/docs/news.xml index 9c5ae7e8a3..813f1a93e3 100644 --- a/docs/news.xml +++ b/docs/news.xml @@ -69,8 +69,104 @@ Model Specific Registers (MSRs) reads and writes. </description> </change> + <change> + <summary> + qemu: add support for encrypted VNC TLS keys + </summary> + <description> + Use the password stored in the secret driver under the uuid + specified by the vnc_tls_x509_secret_uuid option in qemu.conf. + </description> + </change>
Is this a new feature or improvement to current support?
+ <change> + <summary> + Add storage pool namespace options + </summary> + <description> + Allow for adjustment of RBD configuration options via Storage + Pool XML Namespace adjustments. + </description> + </change>
I deliberately left this out primarily because of the position that namespace options were not "standard" or "supported" for guests. It's more than just RDB too, one could use namespaces to add more mount options as well. Still these are only documented within the storage pool xml page (formatstorage).
It is sufficient to document feature at one place IMO. But if you don't want to advertise it I can remove this item.
+ <change> + <summary> + qemu: Add support for setting post-copy migration bandwidth + </summary> + <description> + Users can now limit the bandwidth of post-copy migration, e.g. + via <code>virsh migrate --postcopy-bandwidth</code>. + </description> + </change> </section> <section title="Improvements"> + <change> + <summary> + Create private chains for virtual network firewall rules + </summary> + <description> + Historically firewall rules for virtual networks were added + straight into the base chains. This works but has a number of + bugs and design limitations. To address them, libvirt now puts + firewall rules into its own chains. + </description> + </change> + <change> + <summary> + Detect CEPH and GPFS as shared FS + </summary> + <description> + When starting a migration libvirt does some sanity checks to + make sure domain will be able to run on destination. One of
"on the destination"
"One of the"
+ requirements is that disk has to either be migrated too or
"that the disk"
I was never friends with 'the' and 'a'. We don't have them in my mother tounge. O:-)
+ live on network filesystem. CEPH and GPFS weren't detected as
s/live on/be accessible from a/
+ a network filesystem. + </description> + </change> + <change> + <summary> + Advertise network MTU via DHCP when specified + </summary> + <description> + If network MTU is set and the network has DHCP enabled, + advertise the MTU in DHCP transaction too so that clients can + adjust their link accordingly. + </description> + </change> + <change> + <summary> + Allocate qemu memory at the configured NUMA nodes from start
QEMU (*repeats many times - other than qemu: XXX, I think they all should be changed).
+ </summary> + <description> + Libvirt used to just start qemu, let it allocate memory for + the guest and then use CGroups to move the memory to
the guest, and then
+ configured NUMA nodes. This is suboptimal as huge chunks of + memory have to be moved. Moreover, this relies on ability to + move memory later which is not always true. Set process
A change was made to set process...
+ affinity corretly from the start so that memory is allocated
correctly
surprisingly, vim spellchecker did not underline this.
+ on the configured nodes from the beginning. + </description> + </change> + <change> + <summary> + Support for newer wireshark
Should this be Wireshark ?? It's a product, right?
+ </summary> + <description> + Wireshark supports out of tree builds of dissectors since its + 2.5.0 release. Adapt libvirt to that. This affects minimal + required version then too.
Adapt libvirt to use the more recent release requiring a source build configuration of libvirt --with-wireshark to upgrade to the more recent version.
[or something similar]
+ </description> + </change> + <change> + <summary> + More use of VIR_AUTOFREE() and friends + </summary> + <description> + Usuaully, this would be viewed as an internal change that + should not concern users. However, since libvirt is written in + memory unsafe language some memory leaks might have been + actually fixed by using VIR_AUTOFREE(). It is definitely step + towards defensive programming. + </description> + </change>
Hmm.. This I thought would be characterized as cleanups that we don't advertise. It's not a feature or improvement, just something w/ code motion or alteration to make use of existing features. I think the whole <description> section would cause someone to wonder whether previous versions of libvirt had leaks.
Of course it did have them. And still does.
I'd just drop the whole thing. If it had to be kept, please sanitize the description to not make it seem like those changes actually removed "many" memory leaks. A few were fixed, but I think those were edge or error conditions.
Okay, I'll drop this section.
</section> <section title="Bug fixes"> <change>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Thanks, Michal
[...]
+ <change> + <summary> + Add storage pool namespace options + </summary> + <description> + Allow for adjustment of RBD configuration options via Storage + Pool XML Namespace adjustments. + </description> + </change>
I deliberately left this out primarily because of the position that namespace options were not "standard" or "supported" for guests. It's more than just RDB too, one could use namespaces to add more mount options as well. Still these are only documented within the storage pool xml page (formatstorage).
It is sufficient to document feature at one place IMO. But if you don't want to advertise it I can remove this item.
Coin flip... But the description should be "Added capability to alter FS mount options and some RBD configuration options via usage of Storage Pool XML namespace syntax. If someone is keen enough to learn more, then they can read the formatstorage docs. John [...] FWIW: starting with the "next" release I'm sure we'll be more vigilant about asking for news.xml updates as they occur... yeah, right ;-)
On Thu, 2019-02-28 at 11:43 +0100, Michal Privoznik wrote:
Not exhaustive list of new features, improvements and bugfixes.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> --- docs/news.xml | 201 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 201 insertions(+)
First of all, thanks for agreeing to taking care of this! And you've been more thorough than I've ever cared to be when updating release notes, too O:-) [...]
+ <change> + <summary> + qemu: add support for encrypted VNC TLS keys + </summary> + <description> + Use the password stored in the secret driver under the uuid + specified by the vnc_tls_x509_secret_uuid option in qemu.conf.
vnc_tls_x509_secret_uuid can be enclosed in <code> elements. [...]
+ <change> + <summary> + Detect CEPH and GPFS as shared FS + </summary> + <description> + When starting a migration libvirt does some sanity checks to
s/does/performs/
+ make sure domain will be able to run on destination. One of + requirements is that disk has to either be migrated too or
Please add "the" in front of the words "domain", "destination", "requirements" and "disk". [...]
+ <change> + <summary> + Allocate qemu memory at the configured NUMA nodes from start
This can be qemu: Allocate memory [...]
+ </summary> + <description> + Libvirt used to just start qemu, let it allocate memory for
s/qemu/QEMU/
+ the guest and then use CGroups to move the memory to + configured NUMA nodes. This is suboptimal as huge chunks of + memory have to be moved. Moreover, this relies on ability to + move memory later which is not always true. Set process + affinity corretly from the start so that memory is allocated
s/corretly/correctly/
+ on the configured nodes from the beginning. + </description> + </change> + <change> + <summary> + Support for newer wireshark
s/wireshark/Wireshark/ [...]
+ <change> + <summary> + More use of VIR_AUTOFREE() and friends + </summary> + <description> + Usuaully, this would be viewed as an internal change that + should not concern users. However, since libvirt is written in + memory unsafe language some memory leaks might have been + actually fixed by using VIR_AUTOFREE(). It is definitely step + towards defensive programming. + </description> + </change>
Despite your explanation, I still don't think this entry belongs to the release notes, especially without evidence that some very significant and impactful memory leak has been fixed in the process. [...]
+ <change> + <summary> + qemu: Fix i6300esb watchdog hotplug on Q35 + </summary> + <description> + Due to a bug libvirt was not allocating PCI address for + watchdog device nor it was telling it to qemu. This lead qemu
s/qemu/QEMU/g [...]
+ <change> + <summary> + qemu: Fix guestfwd hotplug/hotunplug + </summary> + <description> + Unaware to libvirt developers whether somebody actually uses + guestfwd, it's hotplug and hotunplug was fixed. Libvirt used + to use incorrect monitor command.
I'm not quite clear on what the first part of the sentence is supposed to mean... Are you trying to say that this has been broken for so long that it makes us wonder whether anyone's using the feature at all? If so, that's not really relevant to the release notes and can be left out.
+ </description> + </change> + <change> + <summary> + qemu: Forbid cdroms on virtio bus
s/cdroms/CDROMs/
+ </summary> + <description> + Attempting to create an empty virtio-blk drive or attempting + to eject it results into an error. Forbid configurations + where users would attempt to use cdroms in virtio bus.
Again here. [...]
+ <change> + <summary> + qemu: Fix block job progress reporting and advocate for READY event + </summary> + <description> + In some cases qemu can get to 100% and still not reach the
s/qemu/QEMU/
+ synchronised phase. Initiating a pivot in that case will fail.
https://www.youtube.com/watch?v=R2u0sN9stbA&t=1m9s :)
+ Therefore it is strongly adviced to wait for
s/adviced/advised/
+ VIR_DOMAIN_BLOCK_JOB_READY event which does not suffer from
VIR_DOMAIN_BLOCK_JOB_READY could have <code> around it.
+ this problem. + </description> + </change> + <change> + <summary> + qemu: Don't format image properties for empty -drive + </summary> + <description> + If a -drive has no image, using image properties makes qemu
s/qemu/QEMU/ With all of the above taken care of, Reviewed-by: Andrea Bolognani <abologna@redhat.com> -- Andrea Bolognani / Red Hat / Virtualization
On Thu, Feb 28, 2019 at 11:43:56AM +0100, Michal Privoznik wrote:
Not exhaustive list of new features, improvements and bugfixes.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> --- docs/news.xml | 201 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 201 insertions(+)
diff --git a/docs/news.xml b/docs/news.xml index 9c5ae7e8a3..813f1a93e3 100644 --- a/docs/news.xml +++ b/docs/news.xml @@ -69,8 +69,104 @@ + <change> + <summary> + Support for newer wireshark + </summary> + <description> + Wireshark supports out of tree builds of dissectors since its + 2.5.0 release. Adapt libvirt to that. This affects minimal + required version then too. + </description> + </change> + <change> + <summary> + More use of VIR_AUTOFREE() and friends + </summary> + <description> + Usuaully, this would be viewed as an internal change that + should not concern users.
Usuaully, justification for including a change goes in the commit message. ;)
However, since libvirt is written in + memory unsafe language some memory leaks might have been + actually fixed by using VIR_AUTOFREE(). It is definitely step + towards defensive programming.
I thought I was programming reasonably defensively already. Anyway I also vote against including this in the news.
+ </description> + </change> </section> <section title="Bug fixes"> <change> @@ -133,6 +229,111 @@ attribute of the network bridge element). </description> </change> + <change> + <summary> + Refresh block jobs on daemon restart + </summary> + <description> + In case the daemon is restarted it now fetches new state of + blockjobs. This means that libvirt does not lose track of + block jobs anymore. + </description> + </change>
This change is only relevant for blockdev which is not enabled yet. For "legacy" blockjobs we get the state from QEMU. So this change can be dropped. Jano
participants (4)
-
Andrea Bolognani -
John Ferlan -
Ján Tomko -
Michal Privoznik