The existing plugins already liberally use host pointer stuffing for passing user data which will fail when doing 64 bit guests on 32 bit hosts. We should discourage this by officially deprecating support and adding another nail to the 32 bit host coffin. Message-Id: <20240910140733.4007719-12-alex.bennee@linaro.org> Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> --- v2 - don't manually set based on CPU type, use __SIZEOF_POINTER__ --- docs/about/deprecated.rst | 11 +++++++++++ configure | 21 ++++++++++++++++++++- 2 files changed, 31 insertions(+), 1 deletion(-) diff --git a/docs/about/deprecated.rst b/docs/about/deprecated.rst index 88f0f03786..f7c7c33d39 100644 --- a/docs/about/deprecated.rst +++ b/docs/about/deprecated.rst @@ -184,6 +184,17 @@ be an effective use of its limited resources, and thus intends to discontinue it. Since all recent x86 hardware from the past >10 years is capable of the 64-bit x86 extensions, a corresponding 64-bit OS should be used instead. +TCG Plugin support not enabled by default on 32-bit hosts (since 9.2) +''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''' + +While it is still possible to enable TCG plugin support for 32-bit +hosts there are a number of potential pitfalls when instrumenting +64-bit guests. The plugin APIs typically pass most addresses as +uint64_t but practices like encoding that address in a host pointer +for passing as user-data will lose data. As most software analysis +benefits from having plenty of host memory it seems reasonable to +encourage users to use 64 bit builds of QEMU for analysis work +whatever targets they are instrumenting. System emulator CPUs -------------------- diff --git a/configure b/configure index 7f6eb6b331..f376fa24b3 100755 --- a/configure +++ b/configure @@ -516,6 +516,25 @@ case "$cpu" in ;; esac +# Now we have our CPU_CFLAGS we can check if we are targeting a 32 or +# 64 bit host. + +check_64bit_host() { +cat > $TMPC <<EOF +#if __SIZEOF_POINTER__ != 8 +#error not 64 bit system +#endif +int main(void) { return 0; } +EOF + compile_object "$1" +} + +if check_64bit_host "$CPU_CFLAGS"; then + host_bits=64 +else + host_bits=32 +fi + if test -n "$host_arch" && { ! test -d "$source_path/linux-user/include/host/$host_arch" || ! test -d "$source_path/common-user/host/$host_arch"; }; then @@ -1028,7 +1047,7 @@ if test "$static" = "yes" ; then fi plugins="no" fi -if test "$plugins" != "no"; then +if test "$plugins" != "no" && test $host_bits -eq 64; then plugins=yes subdirs="$subdirs contrib/plugins" fi -- 2.39.5

This is a simple control flow tracking plugin that uses the latest inline and conditional operations to detect and track control flow changes. It is currently an exercise at seeing how useful the changes are. Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org> Message-Id: <20240910140733.4007719-14-alex.bennee@linaro.org> Based-on: <20240312075428.244210-1-pierrick.bouvier@linaro.org> Cc: Gustavo Romero <gustavo.romero@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> --- v2 - only need a single call back - drop need for INSN_WIDTH - still don't understand the early exits v3 - move initial STORE ops to first instruction to avoid confusion with the conditional callback on the start - filter out non-branches before processing - fix off-by-one with accounting - display "sync fault" or "branch" instead of raw numbers v4 - rename hotdest to hottest (i.e. the hottest branch insn) - rename early to exception - WIP insn structure v5 - dropped #if 0 code and unused vars --- contrib/plugins/cflow.c | 384 +++++++++++++++++++++++++++++++++++++++ contrib/plugins/Makefile | 1 + 2 files changed, 385 insertions(+) create mode 100644 contrib/plugins/cflow.c diff --git a/contrib/plugins/cflow.c b/contrib/plugins/cflow.c new file mode 100644 index 0000000000..c0dc90b0fe --- /dev/null +++ b/contrib/plugins/cflow.c @@ -0,0 +1,384 @@ +/* + * Control Flow plugin + * + * This plugin will track changes to control flow and detect where + * instructions fault. + * + * Copyright (c) 2024 Linaro Ltd + * + * SPDX-License-Identifier: GPL-2.0-or-later + */ +#include <glib.h> +#include <inttypes.h> +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <unistd.h> + +#include <qemu-plugin.h> + +QEMU_PLUGIN_EXPORT int qemu_plugin_version = QEMU_PLUGIN_VERSION; + +typedef enum { + SORT_HOTTEST, /* hottest branch insn */ + SORT_EXCEPTION, /* most early exits */ + SORT_POPDEST, /* most destinations (usually ret's) */ +} ReportType; + +ReportType report = SORT_HOTTEST; +int topn = 10; + +typedef struct { + uint64_t daddr; + uint64_t dcount; +} DestData; + +/* A node is an address where we can go to multiple places */ +typedef struct { + GMutex lock; + /* address of the branch point */ + uint64_t addr; + /* array of DestData */ + GArray *dests; + /* early exit/fault count */ + uint64_t early_exit; + /* jump destination count */ + uint64_t dest_count; + /* instruction data */ + char *insn_disas; + /* symbol? */ + const char *symbol; + /* times translated as last in block? */ + int last_count; + /* times translated in the middle of block? */ + int mid_count; +} NodeData; + +typedef enum { + /* last insn in block, expected flow control */ + LAST_INSN = (1 << 0), + /* mid-block insn, can only be an exception */ + EXCP_INSN = (1 << 1), + /* multiple disassembly, may have changed */ + MULT_INSN = (1 << 2), +} InsnTypes; + +typedef struct { + /* address of the branch point */ + uint64_t addr; + /* disassembly */ + char *insn_disas; + /* symbol? */ + const char *symbol; + /* types */ + InsnTypes type_flag; +} InsnData; + +/* We use this to track the current execution state */ +typedef struct { + /* address of end of block */ + uint64_t end_block; + /* next pc after end of block */ + uint64_t pc_after_block; + /* address of last executed PC */ + uint64_t last_pc; +} VCPUScoreBoard; + +/* descriptors for accessing the above scoreboard */ +static qemu_plugin_u64 end_block; +static qemu_plugin_u64 pc_after_block; +static qemu_plugin_u64 last_pc; + + +static GMutex node_lock; +static GHashTable *nodes; +struct qemu_plugin_scoreboard *state; + +/* SORT_HOTTEST */ +static gint hottest(gconstpointer a, gconstpointer b) +{ + NodeData *na = (NodeData *) a; + NodeData *nb = (NodeData *) b; + + return na->dest_count > nb->dest_count ? -1 : + na->dest_count == nb->dest_count ? 0 : 1; +} + +static gint exception(gconstpointer a, gconstpointer b) +{ + NodeData *na = (NodeData *) a; + NodeData *nb = (NodeData *) b; + + return na->early_exit > nb->early_exit ? -1 : + na->early_exit == nb->early_exit ? 0 : 1; +} + +static gint popular(gconstpointer a, gconstpointer b) +{ + NodeData *na = (NodeData *) a; + NodeData *nb = (NodeData *) b; + + return na->dests->len > nb->dests->len ? -1 : + na->dests->len == nb->dests->len ? 0 : 1; +} + +/* Filter out non-branches - returns true to remove entry */ +static gboolean filter_non_branches(gpointer key, gpointer value, gpointer user_data) +{ + NodeData *node = (NodeData *) value; + + return node->dest_count == 0; +} + +static void plugin_exit(qemu_plugin_id_t id, void *p) +{ + g_autoptr(GString) result = g_string_new("collected "); + GList *data; + GCompareFunc sort = &hottest; + int n = 0; + + g_mutex_lock(&node_lock); + g_string_append_printf(result, "%d control flow nodes in the hash table\n", + g_hash_table_size(nodes)); + + /* remove all nodes that didn't branch */ + g_hash_table_foreach_remove(nodes, filter_non_branches, NULL); + + data = g_hash_table_get_values(nodes); + + switch (report) { + case SORT_HOTTEST: + sort = &hottest; + break; + case SORT_EXCEPTION: + sort = &exception; + break; + case SORT_POPDEST: + sort = &popular; + break; + } + + data = g_list_sort(data, sort); + + for (GList *l = data; + l != NULL && n < topn; + l = l->next, n++) { + NodeData *n = l->data; + const char *type = n->mid_count ? "sync fault" : "branch"; + g_string_append_printf(result, " addr: 0x%"PRIx64 " %s: %s (%s)\n", + n->addr, n->symbol, n->insn_disas, type); + if (n->early_exit) { + g_string_append_printf(result, " early exits %"PRId64"\n", + n->early_exit); + } + g_string_append_printf(result, " branches %"PRId64"\n", + n->dest_count); + for (int j = 0; j < n->dests->len; j++ ) { + DestData *dd = &g_array_index(n->dests, DestData, j); + g_string_append_printf(result, " to 0x%"PRIx64" (%"PRId64")\n", + dd->daddr, dd->dcount); + } + } + + qemu_plugin_outs(result->str); + + g_mutex_unlock(&node_lock); +} + +static void plugin_init(void) +{ + g_mutex_init(&node_lock); + nodes = g_hash_table_new(NULL, g_direct_equal); + state = qemu_plugin_scoreboard_new(sizeof(VCPUScoreBoard)); + + /* score board declarations */ + end_block = qemu_plugin_scoreboard_u64_in_struct(state, VCPUScoreBoard, end_block); + pc_after_block = qemu_plugin_scoreboard_u64_in_struct(state, VCPUScoreBoard, pc_after_block); + last_pc = qemu_plugin_scoreboard_u64_in_struct(state, VCPUScoreBoard, last_pc); +} + +static NodeData *create_node(uint64_t addr) +{ + NodeData *node = g_new0(NodeData, 1); + g_mutex_init(&node->lock); + node->addr = addr; + node->dests = g_array_new(true, true, sizeof(DestData)); + return node; +} + +static NodeData *fetch_node(uint64_t addr, bool create_if_not_found) +{ + NodeData *node = NULL; + + g_mutex_lock(&node_lock); + node = (NodeData *) g_hash_table_lookup(nodes, (gconstpointer) addr); + if (!node && create_if_not_found) { + node = create_node(addr); + g_hash_table_insert(nodes, (gpointer) addr, (gpointer) node); + } + g_mutex_unlock(&node_lock); + return node; +} + +/* + * Called when we detect a non-linear execution (pc != + * pc_after_block). This could be due to a fault causing some sort of + * exit exception (if last_pc != block_end) or just a taken branch. + */ +static void vcpu_tb_branched_exec(unsigned int cpu_index, void *udata) +{ + uint64_t lpc = qemu_plugin_u64_get(last_pc, cpu_index); + uint64_t ebpc = qemu_plugin_u64_get(end_block, cpu_index); + uint64_t npc = qemu_plugin_u64_get(pc_after_block, cpu_index); + uint64_t pc = GPOINTER_TO_UINT(udata); + + /* return early for address 0 */ + if (!lpc) { + return; + } + + NodeData *node = fetch_node(lpc, true); + DestData *data = NULL; + bool early_exit = (lpc != ebpc); + GArray *dests; + + /* the condition should never hit */ + g_assert(pc != npc); + + g_mutex_lock(&node->lock); + + if (early_exit) { + fprintf(stderr, "%s: pc=%"PRIx64", epbc=%"PRIx64 + " npc=%"PRIx64", lpc=%"PRIx64", \n", + __func__, pc, ebpc, npc, lpc); + node->early_exit++; + if (!node->mid_count) { + /* count now as we've only just allocated */ + node->mid_count++; + } + } + + dests = node->dests; + for (int i = 0; i < dests->len; i++) { + if (g_array_index(dests, DestData, i).daddr == pc) { + data = &g_array_index(dests, DestData, i); + } + } + + /* we've never seen this before, allocate a new entry */ + if (!data) { + DestData new_entry = { .daddr = pc }; + g_array_append_val(dests, new_entry); + data = &g_array_index(dests, DestData, dests->len - 1); + g_assert(data->daddr == pc); + } + + data->dcount++; + node->dest_count++; + + g_mutex_unlock(&node->lock); +} + +/* + * At the start of each block we need to resolve two things: + * + * - is last_pc == block_end, if not we had an early exit + * - is start of block last_pc + insn width, if not we jumped + * + * Once those are dealt with we can instrument the rest of the + * instructions for their execution. + * + */ +static void vcpu_tb_trans(qemu_plugin_id_t id, struct qemu_plugin_tb *tb) +{ + uint64_t pc = qemu_plugin_tb_vaddr(tb); + size_t insns = qemu_plugin_tb_n_insns(tb); + struct qemu_plugin_insn *first_insn = qemu_plugin_tb_get_insn(tb, 0); + struct qemu_plugin_insn *last_insn = qemu_plugin_tb_get_insn(tb, insns - 1); + + /* + * check if we are executing linearly after the last block. We can + * handle both early block exits and normal branches in the + * callback if we hit it. + */ + gpointer udata = GUINT_TO_POINTER(pc); + qemu_plugin_register_vcpu_tb_exec_cond_cb( + tb, vcpu_tb_branched_exec, QEMU_PLUGIN_CB_NO_REGS, + QEMU_PLUGIN_COND_NE, pc_after_block, pc, udata); + + /* + * Now we can set start/end for this block so the next block can + * check where we are at. Do this on the first instruction and not + * the TB so we don't get mixed up with above. + */ + qemu_plugin_register_vcpu_insn_exec_inline_per_vcpu(first_insn, + QEMU_PLUGIN_INLINE_STORE_U64, + end_block, qemu_plugin_insn_vaddr(last_insn)); + qemu_plugin_register_vcpu_insn_exec_inline_per_vcpu(first_insn, + QEMU_PLUGIN_INLINE_STORE_U64, + pc_after_block, + qemu_plugin_insn_vaddr(last_insn) + + qemu_plugin_insn_size(last_insn)); + + for (int idx = 0; idx < qemu_plugin_tb_n_insns(tb); ++idx) { + struct qemu_plugin_insn *insn = qemu_plugin_tb_get_insn(tb, idx); + uint64_t ipc = qemu_plugin_insn_vaddr(insn); + /* + * If this is a potential branch point check if we could grab + * the disassembly for it. If it is the last instruction + * always create an entry. + */ + NodeData *node = fetch_node(ipc, last_insn); + if (node) { + g_mutex_lock(&node->lock); + if (!node->insn_disas) { + node->insn_disas = qemu_plugin_insn_disas(insn); + } + if (!node->symbol) { + node->symbol = qemu_plugin_insn_symbol(insn); + } + if (last_insn == insn) { + node->last_count++; + } else { + node->mid_count++; + } + g_mutex_unlock(&node->lock); + } + + /* Store the PC of what we are about to execute */ + qemu_plugin_register_vcpu_insn_exec_inline_per_vcpu(insn, + QEMU_PLUGIN_INLINE_STORE_U64, + last_pc, ipc); + } +} + +QEMU_PLUGIN_EXPORT +int qemu_plugin_install(qemu_plugin_id_t id, const qemu_info_t *info, + int argc, char **argv) +{ + for (int i = 0; i < argc; i++) { + char *opt = argv[i]; + g_auto(GStrv) tokens = g_strsplit(opt, "=", 2); + if (g_strcmp0(tokens[0], "sort") == 0) { + if (g_strcmp0(tokens[1], "hottest") == 0) { + report = SORT_HOTTEST; + } else if (g_strcmp0(tokens[1], "early") == 0) { + report = SORT_EXCEPTION; + } else if (g_strcmp0(tokens[1], "exceptions") == 0) { + report = SORT_POPDEST; + } else { + fprintf(stderr, "failed to parse: %s\n", tokens[1]); + return -1; + } + } else { + fprintf(stderr, "option parsing failed: %s\n", opt); + return -1; + } + } + + plugin_init(); + + qemu_plugin_register_vcpu_tb_trans_cb(id, vcpu_tb_trans); + qemu_plugin_register_atexit_cb(id, plugin_exit, NULL); + return 0; +} diff --git a/contrib/plugins/Makefile b/contrib/plugins/Makefile index 05a2a45c5c..d4ac599f93 100644 --- a/contrib/plugins/Makefile +++ b/contrib/plugins/Makefile @@ -29,6 +29,7 @@ NAMES += cache NAMES += drcov NAMES += ips NAMES += stoptrigger +NAMES += cflow ifeq ($(CONFIG_WIN32),y) SO_SUFFIX := .dll -- 2.39.5

From: Pierrick Bouvier <pierrick.bouvier@linaro.org> This value can be accessed only during a memory callback, using new qemu_plugin_mem_get_value function. Returned value can be extended when QEMU will support accesses wider than 128 bits. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1719 Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2152 Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Xingtao Yao <yaoxt.fnst@fujitsu.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org> Message-Id: <20240724194708.1843704-3-pierrick.bouvier@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> --- include/qemu/qemu-plugin.h | 32 ++++++++++++++++++++++++++++++++ plugins/api.c | 33 +++++++++++++++++++++++++++++++++ plugins/qemu-plugins.symbols | 1 + 3 files changed, 66 insertions(+) diff --git a/include/qemu/qemu-plugin.h b/include/qemu/qemu-plugin.h index c71c705b69..649ce89815 100644 --- a/include/qemu/qemu-plugin.h +++ b/include/qemu/qemu-plugin.h @@ -262,6 +262,29 @@ enum qemu_plugin_mem_rw { QEMU_PLUGIN_MEM_RW, }; +enum qemu_plugin_mem_value_type { + QEMU_PLUGIN_MEM_VALUE_U8, + QEMU_PLUGIN_MEM_VALUE_U16, + QEMU_PLUGIN_MEM_VALUE_U32, + QEMU_PLUGIN_MEM_VALUE_U64, + QEMU_PLUGIN_MEM_VALUE_U128, +}; + +/* typedef qemu_plugin_mem_value - value accessed during a load/store */ +typedef struct { + enum qemu_plugin_mem_value_type type; + union { + uint8_t u8; + uint16_t u16; + uint32_t u32; + uint64_t u64; + struct { + uint64_t low; + uint64_t high; + } u128; + } data; +} qemu_plugin_mem_value; + /** * enum qemu_plugin_cond - condition to enable callback * @@ -551,6 +574,15 @@ bool qemu_plugin_mem_is_big_endian(qemu_plugin_meminfo_t info); QEMU_PLUGIN_API bool qemu_plugin_mem_is_store(qemu_plugin_meminfo_t info); +/** + * qemu_plugin_mem_get_mem_value() - return last value loaded/stored + * @info: opaque memory transaction handle + * + * Returns: memory value + */ +QEMU_PLUGIN_API +qemu_plugin_mem_value qemu_plugin_mem_get_value(qemu_plugin_meminfo_t info); + /** * qemu_plugin_get_hwaddr() - return handle for memory operation * @info: opaque memory info structure diff --git a/plugins/api.c b/plugins/api.c index 2ff13d09de..3316d4a04d 100644 --- a/plugins/api.c +++ b/plugins/api.c @@ -351,6 +351,39 @@ bool qemu_plugin_mem_is_store(qemu_plugin_meminfo_t info) return get_plugin_meminfo_rw(info) & QEMU_PLUGIN_MEM_W; } +qemu_plugin_mem_value qemu_plugin_mem_get_value(qemu_plugin_meminfo_t info) +{ + uint64_t low = current_cpu->neg.plugin_mem_value_low; + qemu_plugin_mem_value value; + + switch (qemu_plugin_mem_size_shift(info)) { + case 0: + value.type = QEMU_PLUGIN_MEM_VALUE_U8; + value.data.u8 = (uint8_t)low; + break; + case 1: + value.type = QEMU_PLUGIN_MEM_VALUE_U16; + value.data.u16 = (uint16_t)low; + break; + case 2: + value.type = QEMU_PLUGIN_MEM_VALUE_U32; + value.data.u32 = (uint32_t)low; + break; + case 3: + value.type = QEMU_PLUGIN_MEM_VALUE_U64; + value.data.u64 = low; + break; + case 4: + value.type = QEMU_PLUGIN_MEM_VALUE_U128; + value.data.u128.low = low; + value.data.u128.high = current_cpu->neg.plugin_mem_value_high; + break; + default: + g_assert_not_reached(); + } + return value; +} + /* * Virtual Memory queries */ diff --git a/plugins/qemu-plugins.symbols b/plugins/qemu-plugins.symbols index ca773d8d9f..eed9d8abd9 100644 --- a/plugins/qemu-plugins.symbols +++ b/plugins/qemu-plugins.symbols @@ -13,6 +13,7 @@ qemu_plugin_insn_size; qemu_plugin_insn_symbol; qemu_plugin_insn_vaddr; + qemu_plugin_mem_get_value; qemu_plugin_mem_is_big_endian; qemu_plugin_mem_is_sign_extended; qemu_plugin_mem_is_store; -- 2.39.5

From: Pierrick Bouvier <pierrick.bouvier@linaro.org> A specific plugin test can now read and check a plugin output, to ensure it contains expected values. Tested-by: Xingtao Yao <yaoxt.fnst@fujitsu.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org> Message-Id: <20240724194708.1843704-5-pierrick.bouvier@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> --- tests/tcg/Makefile.target | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/tests/tcg/Makefile.target b/tests/tcg/Makefile.target index c5b1c7a786..2da70b2fcf 100644 --- a/tests/tcg/Makefile.target +++ b/tests/tcg/Makefile.target @@ -90,6 +90,7 @@ CFLAGS= LDFLAGS= QEMU_OPTS= +CHECK_PLUGIN_OUTPUT_COMMAND= # If TCG debugging, or TCI is enabled things are a lot slower @@ -180,6 +181,10 @@ run-plugin-%: -plugin $(PLUGIN_LIB)/$(call extract-plugin,$@)$(PLUGIN_ARGS) \ -d plugin -D $*.pout \ $(call strip-plugin,$<)) + $(if $(CHECK_PLUGIN_OUTPUT_COMMAND), \ + $(call quiet-command, $(CHECK_PLUGIN_OUTPUT_COMMAND) $*.pout, \ + TEST, check plugin $(call extract-plugin,$@) output \ + with $(call strip-plugin,$<))) else run-%: % $(call run-test, $<, \ @@ -194,6 +199,10 @@ run-plugin-%: -plugin $(PLUGIN_LIB)/$(call extract-plugin,$@)$(PLUGIN_ARGS) \ -d plugin -D $*.pout \ $(QEMU_OPTS) $(call strip-plugin,$<)) + $(if $(CHECK_PLUGIN_OUTPUT_COMMAND), \ + $(call quiet-command, $(CHECK_PLUGIN_OUTPUT_COMMAND) $*.pout, \ + TEST, check plugin $(call extract-plugin,$@) output \ + with $(call strip-plugin,$<))) endif gdb-%: % -- 2.39.5

From: Pierrick Bouvier <pierrick.bouvier@linaro.org> Add an explicit test to check expected memory values are read/written. 8,16,32 load/store are tested for all arch. 64,128 load/store are tested for aarch64/x64. atomic operations (8,16,32,64) are tested for x64 only. By default, atomic accesses are non atomic if a single cpu is running, so we force creation of a second one by creating a new thread first. load/store helpers code path can't be triggered easily in user mode (no softmmu), so we can't test it here. Output of test-plugin-mem-access.c is the list of expected patterns in plugin output. By reading stdout, we can compare to plugins output and have a multiarch test. Can be run with: make -C build/tests/tcg/$ARCH-linux-user run-plugin-test-plugin-mem-access-with-libmem.so Tested-by: Xingtao Yao <yaoxt.fnst@fujitsu.com> Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org> Message-Id: <20240910172033.1427812-7-pierrick.bouvier@linaro.org> --- tests/tcg/multiarch/test-plugin-mem-access.c | 177 +++++++++++++++++++ tests/tcg/alpha/Makefile.target | 3 + tests/tcg/multiarch/Makefile.target | 11 ++ tests/tcg/multiarch/check-plugin-output.sh | 36 ++++ tests/tcg/ppc64/Makefile.target | 5 + 5 files changed, 232 insertions(+) create mode 100644 tests/tcg/multiarch/test-plugin-mem-access.c create mode 100755 tests/tcg/multiarch/check-plugin-output.sh diff --git a/tests/tcg/multiarch/test-plugin-mem-access.c b/tests/tcg/multiarch/test-plugin-mem-access.c new file mode 100644 index 0000000000..057b9aac9f --- /dev/null +++ b/tests/tcg/multiarch/test-plugin-mem-access.c @@ -0,0 +1,177 @@ +/* + * SPDX-License-Identifier: GPL-2.0-or-later + * + * Check if we detect all memory accesses expected using plugin API. + * Used in conjunction with ./check-plugin-mem-access.sh check script. + * Output of this program is the list of patterns expected in plugin output. + * + * 8,16,32 load/store are tested for all arch. + * 64,128 load/store are tested for aarch64/x64. + * atomic operations (8,16,32,64) are tested for x64 only. + */ + +#include <pthread.h> +#include <stdint.h> +#include <stdio.h> +#include <stdlib.h> + +#if defined(__x86_64__) +#include <emmintrin.h> +#elif defined(__aarch64__) +#include <arm_neon.h> +#endif /* __x86_64__ */ + +static void *data; + +/* ,store_u8,.*,8,store,0xf1 */ +#define PRINT_EXPECTED(function, type, value, action) \ +do { \ + printf(",%s,.*,%d,%s,%s\n", \ + #function, (int) sizeof(type) * 8, action, value); \ +} \ +while (0) + +#define DEFINE_STORE(name, type, value) \ + \ +static void print_expected_store_##name(void) \ +{ \ + PRINT_EXPECTED(store_##name, type, #value, "store"); \ +} \ + \ +static void store_##name(void) \ +{ \ + *((type *)data) = value; \ + print_expected_store_##name(); \ +} + +#define DEFINE_ATOMIC_OP(name, type, value) \ + \ +static void print_expected_atomic_op_##name(void) \ +{ \ + PRINT_EXPECTED(atomic_op_##name, type, "0x0*42", "load"); \ + PRINT_EXPECTED(atomic_op_##name, type, #value, "store"); \ +} \ + \ +static void atomic_op_##name(void) \ +{ \ + *((type *)data) = 0x42; \ + __sync_val_compare_and_swap((type *)data, 0x42, value); \ + print_expected_atomic_op_##name(); \ +} + +#define DEFINE_LOAD(name, type, value) \ + \ +static void print_expected_load_##name(void) \ +{ \ + PRINT_EXPECTED(load_##name, type, #value, "load"); \ +} \ + \ +static void load_##name(void) \ +{ \ + \ + /* volatile forces load to be generated. */ \ + volatile type src = *((type *) data); \ + volatile type dest = src; \ + (void)src, (void)dest; \ + print_expected_load_##name(); \ +} + +DEFINE_STORE(u8, uint8_t, 0xf1) +DEFINE_LOAD(u8, uint8_t, 0xf1) +DEFINE_STORE(u16, uint16_t, 0xf123) +DEFINE_LOAD(u16, uint16_t, 0xf123) +DEFINE_STORE(u32, uint32_t, 0xff112233) +DEFINE_LOAD(u32, uint32_t, 0xff112233) + +#if defined(__x86_64__) || defined(__aarch64__) +DEFINE_STORE(u64, uint64_t, 0xf123456789abcdef) +DEFINE_LOAD(u64, uint64_t, 0xf123456789abcdef) + +static void print_expected_store_u128(void) +{ + PRINT_EXPECTED(store_u128, __int128, + "0xf122334455667788f123456789abcdef", "store"); +} + +static void store_u128(void) +{ +#ifdef __x86_64__ + _mm_store_si128(data, _mm_set_epi32(0xf1223344, 0x55667788, + 0xf1234567, 0x89abcdef)); +#else + const uint32_t init[4] = {0x89abcdef, 0xf1234567, 0x55667788, 0xf1223344}; + uint32x4_t vec = vld1q_u32(init); + vst1q_u32(data, vec); +#endif /* __x86_64__ */ + print_expected_store_u128(); +} + +static void print_expected_load_u128(void) +{ + PRINT_EXPECTED(load_u128, __int128, + "0xf122334455667788f123456789abcdef", "load"); +} + +static void load_u128(void) +{ +#ifdef __x86_64__ + __m128i var = _mm_load_si128(data); +#else + uint32x4_t var = vld1q_u32(data); +#endif + (void) var; + print_expected_load_u128(); +} +#endif /* __x86_64__ || __aarch64__ */ + +#if defined(__x86_64__) +DEFINE_ATOMIC_OP(u8, uint8_t, 0xf1) +DEFINE_ATOMIC_OP(u16, uint16_t, 0xf123) +DEFINE_ATOMIC_OP(u32, uint32_t, 0xff112233) +DEFINE_ATOMIC_OP(u64, uint64_t, 0xf123456789abcdef) +#endif /* __x86_64__ */ + +static void *f(void *p) +{ + return NULL; +} + +int main(void) +{ + /* + * We force creation of a second thread to enable cpu flag CF_PARALLEL. + * This will generate atomic operations when needed. + */ + pthread_t thread; + pthread_create(&thread, NULL, &f, NULL); + pthread_join(thread, NULL); + + /* allocate storage up to 128 bits */ + data = malloc(16); + + store_u8(); + load_u8(); + + store_u16(); + load_u16(); + + store_u32(); + load_u32(); + +#if defined(__x86_64__) || defined(__aarch64__) + store_u64(); + load_u64(); + + store_u128(); + load_u128(); +#endif /* __x86_64__ || __aarch64__ */ + +#if defined(__x86_64__) + atomic_op_u8(); + atomic_op_u16(); + atomic_op_u32(); + atomic_op_u64(); +#endif /* __x86_64__ */ + + free(data); +} diff --git a/tests/tcg/alpha/Makefile.target b/tests/tcg/alpha/Makefile.target index fdd7ddf64e..36d8ed1eae 100644 --- a/tests/tcg/alpha/Makefile.target +++ b/tests/tcg/alpha/Makefile.target @@ -12,4 +12,7 @@ test-cmov: EXTRA_CFLAGS=-DTEST_CMOV test-cmov: test-cond.c $(CC) $(CFLAGS) $(EXTRA_CFLAGS) $< -o $@ $(LDFLAGS) +# Force generation of byte read/write +test-plugin-mem-access: CFLAGS+=-mbwx + run-test-cmov: test-cmov diff --git a/tests/tcg/multiarch/Makefile.target b/tests/tcg/multiarch/Makefile.target index 5e3391ec9d..78b83d5575 100644 --- a/tests/tcg/multiarch/Makefile.target +++ b/tests/tcg/multiarch/Makefile.target @@ -170,5 +170,16 @@ run-plugin-semiconsole-with-%: TESTS += semihosting semiconsole endif +# Test plugin memory access instrumentation +run-plugin-test-plugin-mem-access-with-libmem.so: \ + PLUGIN_ARGS=$(COMMA)print-accesses=true +run-plugin-test-plugin-mem-access-with-libmem.so: \ + CHECK_PLUGIN_OUTPUT_COMMAND= \ + $(SRC_PATH)/tests/tcg/multiarch/check-plugin-output.sh \ + $(QEMU) $< + +test-plugin-mem-access: CFLAGS+=-pthread -O0 +test-plugin-mem-access: LDFLAGS+=-pthread -O0 + # Update TESTS TESTS += $(MULTIARCH_TESTS) diff --git a/tests/tcg/multiarch/check-plugin-output.sh b/tests/tcg/multiarch/check-plugin-output.sh new file mode 100755 index 0000000000..80607f04b5 --- /dev/null +++ b/tests/tcg/multiarch/check-plugin-output.sh @@ -0,0 +1,36 @@ +#!/usr/bin/env bash + +# This script runs a given executable using qemu, and compare its standard +# output with an expected plugin output. +# Each line of output is searched (as a regexp) in the expected plugin output. + +set -euo pipefail + +die() +{ + echo "$@" 1>&2 + exit 1 +} + +check() +{ + file=$1 + pattern=$2 + grep "$pattern" "$file" > /dev/null || die "\"$pattern\" not found in $file" +} + +[ $# -eq 3 ] || die "usage: qemu_bin exe plugin_out_file" + +qemu_bin=$1; shift +exe=$1;shift +plugin_out=$1; shift + +expected() +{ + $qemu_bin $exe || + die "running $exe failed" +} + +expected | while read line; do + check "$plugin_out" "$line" +done diff --git a/tests/tcg/ppc64/Makefile.target b/tests/tcg/ppc64/Makefile.target index 509a20be2b..1940886c73 100644 --- a/tests/tcg/ppc64/Makefile.target +++ b/tests/tcg/ppc64/Makefile.target @@ -55,4 +55,9 @@ PPC64_TESTS += signal_save_restore_xer PPC64_TESTS += xxspltw PPC64_TESTS += test-aes +# ppc64 ABI uses function descriptors, and thus, QEMU can't find symbol for a +# given instruction. Thus, we don't check output of mem-access plugin. +run-plugin-test-plugin-mem-access-with-libmem.so: \ + CHECK_PLUGIN_OUTPUT_COMMAND= + TESTS += $(PPC64_TESTS) -- 2.39.5

While the compilers will generally happily synthesise a 64 bit value for you on 32 bit systems it doesn't exercise anything on QEMU. It also makes it hard to accurately compare the accesses to test_data when instrumenting. Message-Id: <20240910140733.4007719-21-alex.bennee@linaro.org> Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> --- v2 - >= test of __SIZEOF_POINTER__ --- tests/tcg/multiarch/system/memory.c | 26 +++++++++++++++++++------- 1 file changed, 19 insertions(+), 7 deletions(-) diff --git a/tests/tcg/multiarch/system/memory.c b/tests/tcg/multiarch/system/memory.c index 8f2371975d..28080767b2 100644 --- a/tests/tcg/multiarch/system/memory.c +++ b/tests/tcg/multiarch/system/memory.c @@ -163,6 +163,7 @@ static void init_test_data_u32(int offset) ml_printf("done %d @ %p\n", i, ptr); } +#if __SIZEOF_POINTER__ >= 8 static void init_test_data_u64(int offset) { uint8_t count = 0; @@ -187,6 +188,7 @@ static void init_test_data_u64(int offset) } ml_printf("done %d @ %p\n", i, ptr); } +#endif static bool read_test_data_u16(int offset) { @@ -254,6 +256,7 @@ static bool read_test_data_u32(int offset) return true; } +#if __SIZEOF_POINTER__ >= 8 static bool read_test_data_u64(int offset) { uint64_t word, *ptr = (uint64_t *)&test_data[offset]; @@ -307,11 +310,16 @@ static bool read_test_data_u64(int offset) ml_printf("done %d @ %p\n", i, ptr); return true; } +#endif /* Read the test data and verify at various offsets */ -read_ufn read_ufns[] = { read_test_data_u16, - read_test_data_u32, - read_test_data_u64 }; +read_ufn read_ufns[] = { + read_test_data_u16, + read_test_data_u32, +#if __SIZEOF_POINTER__ >= 8 + read_test_data_u64 +#endif +}; bool do_unsigned_reads(int start_off) { @@ -476,10 +484,14 @@ bool do_signed_reads(bool neg_first) return ok; } -init_ufn init_ufns[] = { init_test_data_u8, - init_test_data_u16, - init_test_data_u32, - init_test_data_u64 }; +init_ufn init_ufns[] = { + init_test_data_u8, + init_test_data_u16, + init_test_data_u32, +#if __SIZEOF_POINTER__ >= 8 + init_test_data_u64 +#endif +}; int main(void) { -- 2.39.5

At first I thought I could compile the user-mode test for system mode however we already have a fairly comprehensive test case for system mode in "memory" so lets use that. As tracking every access will quickly build up with "print-access" we add a new mode to track groups of reads and writes to regions. Because the test_data is 16k aligned we can be sure all accesses to it are ones we can count. First we extend the test to report where the test_data region is. Then we expand the pdot() function to track the total number of reads and writes to the region. We have to add some addition pdot() calls to take into account multiple reads/writes in the test loops. Finally we add a python script to integrate the data from the plugin and the output of the test and validate they both agree on the total counts. As some boot codes clear the bss we also add a flag to add a regions worth of writes to the expected total. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> --- v2 - aggressively align test_data on "region size" - sort the regions in the final report - ensure alpha-softmmu uses byte access when it can v3 - fix thinko while iterating through the regions - fix the LE/BE storage of values in the mirror section - add --bss-cleared to script - clean-up some long lines in the script --- tests/tcg/multiarch/system/memory.c | 50 +++-- tests/tcg/plugins/mem.c | 181 +++++++++++++++++- tests/tcg/alpha/Makefile.softmmu-target | 2 +- .../multiarch/system/Makefile.softmmu-target | 6 + .../system/validate-memory-counts.py | 129 +++++++++++++ tests/tcg/s390x/Makefile.softmmu-target | 5 + 6 files changed, 354 insertions(+), 19 deletions(-) create mode 100755 tests/tcg/multiarch/system/validate-memory-counts.py diff --git a/tests/tcg/multiarch/system/memory.c b/tests/tcg/multiarch/system/memory.c index 28080767b2..65a6038a24 100644 --- a/tests/tcg/multiarch/system/memory.c +++ b/tests/tcg/multiarch/system/memory.c @@ -14,26 +14,35 @@ #include <stdint.h> #include <stdbool.h> +#include <inttypes.h> #include <minilib.h> #ifndef CHECK_UNALIGNED # error "Target does not specify CHECK_UNALIGNED" #endif +uint32_t test_read_count; +uint32_t test_write_count; + #define MEM_PAGE_SIZE 4096 /* nominal 4k "pages" */ #define TEST_SIZE (MEM_PAGE_SIZE * 4) /* 4 pages */ #define ARRAY_SIZE(x) ((sizeof(x) / sizeof((x)[0]))) -__attribute__((aligned(MEM_PAGE_SIZE))) +__attribute__((aligned(TEST_SIZE))) static uint8_t test_data[TEST_SIZE]; typedef void (*init_ufn) (int offset); typedef bool (*read_ufn) (int offset); typedef bool (*read_sfn) (int offset, bool nf); -static void pdot(int count) +static void pdot(int count, bool write) { + if (write) { + test_write_count++; + } else { + test_read_count++; + } if (count % 128 == 0) { ml_printf("."); } @@ -67,7 +76,7 @@ static void init_test_data_u8(int unused_offset) for (i = 0; i < TEST_SIZE; i++) { *ptr++ = BYTE_NEXT(count); - pdot(i); + pdot(i, true); } ml_printf("done %d @ %p\n", i, ptr); @@ -93,8 +102,9 @@ static void init_test_data_s8(bool neg_first) neg_first ? "neg first" : "pos first"); for (i = 0; i < TEST_SIZE / 2; i++) { *ptr++ = get_byte(i, neg_first); + pdot(i, true); *ptr++ = get_byte(i, !neg_first); - pdot(i); + pdot(i, true); } ml_printf("done %d @ %p\n", i * 2, ptr); } @@ -116,6 +126,7 @@ static void reset_start_data(int offset) for (i = 0; i < offset; i++) { *ptr++ = 0; + pdot(i, true); } ml_printf("done %d @ %p\n", i, ptr); @@ -136,7 +147,7 @@ static void init_test_data_u16(int offset) uint16_t low = BYTE_NEXT(count), high = BYTE_NEXT(count); word = BYTE_SHIFT(high, 1) | BYTE_SHIFT(low, 0); *ptr++ = word; - pdot(i); + pdot(i, true); } ml_printf("done %d @ %p\n", i, ptr); } @@ -158,7 +169,7 @@ static void init_test_data_u32(int offset) word = BYTE_SHIFT(b1, 3) | BYTE_SHIFT(b2, 2) | BYTE_SHIFT(b3, 1) | BYTE_SHIFT(b4, 0); *ptr++ = word; - pdot(i); + pdot(i, true); } ml_printf("done %d @ %p\n", i, ptr); } @@ -184,7 +195,7 @@ static void init_test_data_u64(int offset) BYTE_SHIFT(b4, 4) | BYTE_SHIFT(b5, 3) | BYTE_SHIFT(b6, 2) | BYTE_SHIFT(b7, 1) | BYTE_SHIFT(b8, 0); *ptr++ = word; - pdot(i); + pdot(i, true); } ml_printf("done %d @ %p\n", i, ptr); } @@ -207,7 +218,7 @@ static bool read_test_data_u16(int offset) ml_printf("Error %d < %d\n", high, low); return false; } else { - pdot(i); + pdot(i, false); } } @@ -249,7 +260,7 @@ static bool read_test_data_u32(int offset) ml_printf("Error %d, %d, %d, %d", b1, b2, b3, b4); return false; } else { - pdot(i); + pdot(i, false); } } ml_printf("done %d @ %p\n", i, ptr); @@ -304,7 +315,7 @@ static bool read_test_data_u64(int offset) b1, b2, b3, b4, b5, b6, b7, b8); return false; } else { - pdot(i); + pdot(i, false); } } ml_printf("done %d @ %p\n", i, ptr); @@ -376,9 +387,11 @@ static bool read_test_data_s8(int offset, bool neg_first) second = *ptr++; if (neg_first && first < 0 && second > 0) { - pdot(i); + pdot(i, false); + pdot(i, false); } else if (!neg_first && first > 0 && second < 0) { - pdot(i); + pdot(i, false); + pdot(i, false); } else { ml_printf("Error %d %c %d\n", first, neg_first ? '<' : '>', second); return false; @@ -409,9 +422,9 @@ static bool read_test_data_s16(int offset, bool neg_first) int32_t data = *ptr++; if (neg_first && data < 0) { - pdot(i); + pdot(i, false); } else if (!neg_first && data > 0) { - pdot(i); + pdot(i, false); } else { ml_printf("Error %d %c 0\n", data, neg_first ? '<' : '>'); return false; @@ -442,9 +455,9 @@ static bool read_test_data_s32(int offset, bool neg_first) int64_t data = *ptr++; if (neg_first && data < 0) { - pdot(i); + pdot(i, false); } else if (!neg_first && data > 0) { - pdot(i); + pdot(i, false); } else { ml_printf("Error %d %c 0\n", data, neg_first ? '<' : '>'); return false; @@ -498,6 +511,9 @@ int main(void) int i; bool ok = true; + ml_printf("Test data start: 0x%"PRIxPTR"\n", &test_data[0]); + ml_printf("Test data end: 0x%"PRIxPTR"\n", &test_data[TEST_SIZE]); + /* Run through the unsigned tests first */ for (i = 0; i < ARRAY_SIZE(init_ufns) && ok; i++) { ok = do_unsigned_test(init_ufns[i]); @@ -513,6 +529,8 @@ int main(void) ok = do_signed_reads(true); } + ml_printf("Test data read: %"PRId32"\n", test_read_count); + ml_printf("Test data write: %"PRId32"\n", test_write_count); ml_printf("Test complete: %s\n", ok ? "PASSED" : "FAILED"); return ok ? 0 : -1; } diff --git a/tests/tcg/plugins/mem.c b/tests/tcg/plugins/mem.c index 086e6f5bdf..c28eedbed0 100644 --- a/tests/tcg/plugins/mem.c +++ b/tests/tcg/plugins/mem.c @@ -9,6 +9,7 @@ #include <stdlib.h> #include <string.h> #include <unistd.h> +#include <endian.h> #include <stdio.h> #include <glib.h> @@ -26,13 +27,46 @@ typedef struct { const char *sym; } InsnInfo; +/* + * For the "memory" system test we need to track accesses to + * individual regions. We mirror the data written to the region and + * then check when it is read that it matches up. + * + * We do this as regions rather than pages to save on complications + * with page crossing and the fact the test only cares about the + * test_data region. + */ +static uint64_t region_size = 4096 * 4; +static uint64_t region_mask; + +typedef struct { + uint64_t region_address; + uint64_t reads; + uint64_t writes; + uint8_t *data; + bool seen_all; /* Did we see every write and read with correct values? */ +} RegionInfo; + static struct qemu_plugin_scoreboard *counts; static qemu_plugin_u64 mem_count; static qemu_plugin_u64 io_count; -static bool do_inline, do_callback, do_print_accesses; +static bool do_inline, do_callback, do_print_accesses, do_region_summary; static bool do_haddr; static enum qemu_plugin_mem_rw rw = QEMU_PLUGIN_MEM_RW; + +static GMutex lock; +static GHashTable *regions; + +static gint addr_order(gconstpointer a, gconstpointer b) +{ + RegionInfo *na = (RegionInfo *) a; + RegionInfo *nb = (RegionInfo *) b; + + return na->region_address > nb->region_address ? 1 : -1; +} + + static void plugin_exit(qemu_plugin_id_t id, void *p) { g_autoptr(GString) out = g_string_new(""); @@ -46,9 +80,132 @@ static void plugin_exit(qemu_plugin_id_t id, void *p) qemu_plugin_u64_sum(io_count)); } qemu_plugin_outs(out->str); + + + if (do_region_summary) { + GList *counts = g_hash_table_get_values(regions); + + counts = g_list_sort(counts, addr_order); + + g_string_printf(out, "Region Base, Reads, Writes, Seen all\n"); + + if (counts && g_list_next(counts)) { + for (/* counts */; counts; counts = counts->next) { + RegionInfo *ri = (RegionInfo *) counts->data; + + g_string_append_printf(out, + "0x%016"PRIx64", " + "%"PRId64", %"PRId64", %s\n", + ri->region_address, + ri->reads, + ri->writes, + ri->seen_all ? "true" : "false"); + } + } + qemu_plugin_outs(out->str); + } + qemu_plugin_scoreboard_free(counts); } +/* + * Update the region tracking info for the access. We split up accesses + * that span regions even though the plugin infrastructure will deliver + * it as a single access. + */ +static void update_region_info(uint64_t region, uint64_t offset, + qemu_plugin_meminfo_t meminfo, + qemu_plugin_mem_value value, + unsigned size) +{ + bool be = qemu_plugin_mem_is_big_endian(meminfo); + bool is_store = qemu_plugin_mem_is_store(meminfo); + RegionInfo *ri; + bool unseen_data = false; + + g_assert(offset + size <= region_size); + + g_mutex_lock(&lock); + ri = (RegionInfo *) g_hash_table_lookup(regions, GUINT_TO_POINTER(region)); + + if (!ri) { + ri = g_new0(RegionInfo, 1); + ri->region_address = region; + ri->data = g_malloc0(region_size); + ri->seen_all = true; + g_hash_table_insert(regions, GUINT_TO_POINTER(region), (gpointer) ri); + } + + if (is_store) { + ri->writes++; + } else { + ri->reads++; + } + + switch (value.type) { + case QEMU_PLUGIN_MEM_VALUE_U8: + if (is_store) { + ri->data[offset] = value.data.u8; + } else if (ri->data[offset] != value.data.u8) { + unseen_data = true; + } + break; + case QEMU_PLUGIN_MEM_VALUE_U16: + { + uint16_t *p = (uint16_t *) &ri->data[offset]; + uint16_t val = be ? htobe16(value.data.u16) : htole16(value.data.u16); + if (is_store) { + *p = val; + } else if (*p != val) { + unseen_data = true; + } + break; + } + case QEMU_PLUGIN_MEM_VALUE_U32: + { + uint32_t *p = (uint32_t *) &ri->data[offset]; + uint32_t val = be ? htobe32(value.data.u32) : htole32(value.data.u32); + if (is_store) { + *p = val; + } else if (*p != val) { + unseen_data = true; + } + break; + } + case QEMU_PLUGIN_MEM_VALUE_U64: + { + uint64_t *p = (uint64_t *) &ri->data[offset]; + uint64_t val = be ? htobe64(value.data.u64) : htole64(value.data.u64); + if (is_store) { + *p = val; + } else if (*p != val) { + unseen_data = true; + } + break; + } + case QEMU_PLUGIN_MEM_VALUE_U128: + /* non in test so skip */ + break; + default: + g_assert_not_reached(); + } + + /* + * This is expected for regions initialised by QEMU (.text etc) but we + * expect to see all data read and written to the test_data region + * of the memory test. + */ + if (unseen_data && ri->seen_all) { + g_autoptr(GString) error = g_string_new("Warning: "); + g_string_append_printf(error, "0x%016"PRIx64":%"PRId64" read an un-instrumented value\n", + region, offset); + qemu_plugin_outs(error->str); + ri->seen_all = false; + } + + g_mutex_unlock(&lock); +} + static void vcpu_mem(unsigned int cpu_index, qemu_plugin_meminfo_t meminfo, uint64_t vaddr, void *udata) { @@ -63,6 +220,15 @@ static void vcpu_mem(unsigned int cpu_index, qemu_plugin_meminfo_t meminfo, } else { qemu_plugin_u64_add(mem_count, cpu_index, 1); } + + if (do_region_summary) { + uint64_t region = vaddr & ~region_mask; + uint64_t offset = vaddr & region_mask; + qemu_plugin_mem_value value = qemu_plugin_mem_get_value(meminfo); + unsigned size = 1 << qemu_plugin_mem_size_shift(meminfo); + + update_region_info(region, offset, meminfo, value, size); + } } static void print_access(unsigned int cpu_index, qemu_plugin_meminfo_t meminfo, @@ -117,7 +283,7 @@ static void vcpu_tb_trans(qemu_plugin_id_t id, struct qemu_plugin_tb *tb) QEMU_PLUGIN_INLINE_ADD_U64, mem_count, 1); } - if (do_callback) { + if (do_callback || do_region_summary) { qemu_plugin_register_vcpu_mem_cb(insn, vcpu_mem, QEMU_PLUGIN_CB_NO_REGS, rw, NULL); @@ -176,6 +342,12 @@ QEMU_PLUGIN_EXPORT int qemu_plugin_install(qemu_plugin_id_t id, fprintf(stderr, "boolean argument parsing failed: %s\n", opt); return -1; } + } else if (g_strcmp0(tokens[0], "region-summary") == 0) { + if (!qemu_plugin_bool_parse(tokens[0], tokens[1], + &do_region_summary)) { + fprintf(stderr, "boolean argument parsing failed: %s\n", opt); + return -1; + } } else { fprintf(stderr, "option parsing failed: %s\n", opt); return -1; @@ -196,6 +368,11 @@ QEMU_PLUGIN_EXPORT int qemu_plugin_install(qemu_plugin_id_t id, qemu_plugin_outs(out->str); } + if (do_region_summary) { + region_mask = (region_size - 1); + regions = g_hash_table_new(NULL, g_direct_equal); + } + counts = qemu_plugin_scoreboard_new(sizeof(CPUCount)); mem_count = qemu_plugin_scoreboard_u64_in_struct( counts, CPUCount, mem_count); diff --git a/tests/tcg/alpha/Makefile.softmmu-target b/tests/tcg/alpha/Makefile.softmmu-target index a0eca4d6ea..a944102a3c 100644 --- a/tests/tcg/alpha/Makefile.softmmu-target +++ b/tests/tcg/alpha/Makefile.softmmu-target @@ -28,7 +28,7 @@ LDFLAGS+=-static -nostdlib $(CRT_OBJS) $(MINILIB_OBJS) -lgcc %: %.c $(LINK_SCRIPT) $(CRT_OBJS) $(MINILIB_OBJS) $(CC) $(CFLAGS) $(EXTRA_CFLAGS) $< -o $@ $(LDFLAGS) -memory: CFLAGS+=-DCHECK_UNALIGNED=0 +memory: CFLAGS+=-DCHECK_UNALIGNED=0 -mbwx # Running QEMU_OPTS+=-serial chardev:output -kernel diff --git a/tests/tcg/multiarch/system/Makefile.softmmu-target b/tests/tcg/multiarch/system/Makefile.softmmu-target index 32dc0f9830..07be001102 100644 --- a/tests/tcg/multiarch/system/Makefile.softmmu-target +++ b/tests/tcg/multiarch/system/Makefile.softmmu-target @@ -65,3 +65,9 @@ endif MULTIARCH_RUNS += run-gdbstub-memory run-gdbstub-interrupt \ run-gdbstub-untimely-packet run-gdbstub-registers + +# Test plugin memory access instrumentation +run-plugin-memory-with-libmem.so: \ + PLUGIN_ARGS=$(COMMA)region-summary=true +run-plugin-memory-with-libmem.so: \ + CHECK_PLUGIN_OUTPUT_COMMAND=$(MULTIARCH_SYSTEM_SRC)/validate-memory-counts.py $@.out diff --git a/tests/tcg/multiarch/system/validate-memory-counts.py b/tests/tcg/multiarch/system/validate-memory-counts.py new file mode 100755 index 0000000000..418862d5d3 --- /dev/null +++ b/tests/tcg/multiarch/system/validate-memory-counts.py @@ -0,0 +1,129 @@ +#!/usr/bin/env python3 +# +# validate-memory-counts.py: check we instrumented memory properly +# +# This program takes two inputs: +# - the mem plugin output +# - the memory binary output +# +# Copyright (C) 2024 Linaro Ltd +# +# SPDX-License-Identifier: GPL-2.0-or-later + +import sys +from argparse import ArgumentParser + +def extract_counts(path): + """ + Load the output from path and extract the lines containing: + + Test data start: 0x40214000 + Test data end: 0x40218001 + Test data read: 2522280 + Test data write: 262111 + + From the stream of data. Extract the values for use in the + validation function. + """ + start_address = None + end_address = None + read_count = 0 + write_count = 0 + with open(path, 'r') as f: + for line in f: + if line.startswith("Test data start:"): + start_address = int(line.split(':')[1].strip(), 16) + elif line.startswith("Test data end:"): + end_address = int(line.split(':')[1].strip(), 16) + elif line.startswith("Test data read:"): + read_count = int(line.split(':')[1].strip()) + elif line.startswith("Test data write:"): + write_count = int(line.split(':')[1].strip()) + return start_address, end_address, read_count, write_count + + +def parse_plugin_output(path, start, end): + """ + Load the plugin output from path in the form of: + + Region Base, Reads, Writes, Seen all + 0x0000000040004000, 31093, 0, false + 0x0000000040214000, 2522280, 278579, true + 0x0000000040000000, 137398, 0, false + 0x0000000040210000, 54727397, 33721956, false + + And extract the ranges that match test data start and end and + return the results. + """ + total_reads = 0 + total_writes = 0 + seen_all = False + + with open(path, 'r') as f: + next(f) # Skip the header + for line in f: + + if line.startswith("Region Base"): + continue + + parts = line.strip().split(', ') + if len(parts) != 4: + continue + + region_base = int(parts[0], 16) + reads = int(parts[1]) + writes = int(parts[2]) + + if start <= region_base < end: # Checking if within range + total_reads += reads + total_writes += writes + seen_all = parts[3] == "true" + + return total_reads, total_writes, seen_all + +def main() -> None: + """ + Process the arguments, injest the program and plugin out and + verify they match up and report if they do not. + """ + parser = ArgumentParser(description="Validate memory instrumentation") + parser.add_argument('test_output', + help="The output from the test itself") + parser.add_argument('plugin_output', + help="The output from memory plugin") + parser.add_argument('--bss-cleared', + action='store_true', + help='Assume bss was cleared (and adjusts counts).') + + args = parser.parse_args() + + # Extract counts from memory binary + start, end, exp_reads, exp_writes = extract_counts(args.test_output) + + # Some targets clear BSS before running but the test doesn't know + # that so we adjust it by the size of the test region. + if args.bss_cleared: + exp_writes += 16384 + + if start is None or end is None: + print("Failed to test_data boundaries from output.") + sys.exit(1) + + # Parse plugin output + preads, pwrites, seen_all = parse_plugin_output(args.plugin_output, start, end) + + if not seen_all: + print("Fail: didn't instrument all accesses to test_data.") + sys.exit(1) + + # Compare and report + if preads == exp_reads and pwrites == exp_writes: + sys.exit(0) + else: + print("Fail: The memory reads and writes count does not match.") + print(f"Expected Reads: {exp_reads}, Actual Reads: {preads}") + print(f"Expected Writes: {exp_writes}, Actual Writes: {pwrites}") + sys.exit(1) + +if __name__ == "__main__": + main() diff --git a/tests/tcg/s390x/Makefile.softmmu-target b/tests/tcg/s390x/Makefile.softmmu-target index be242ba8f1..3227903348 100644 --- a/tests/tcg/s390x/Makefile.softmmu-target +++ b/tests/tcg/s390x/Makefile.softmmu-target @@ -47,3 +47,8 @@ $(MULTIARCH_TESTS): $(S390X_MULTIARCH_RUNTIME_OBJS) $(MULTIARCH_TESTS): LDFLAGS += $(S390X_MULTIARCH_RUNTIME_OBJS) $(MULTIARCH_TESTS): CFLAGS += $(MINILIB_INC) memory: CFLAGS += -DCHECK_UNALIGNED=0 + +# s390x clears the BSS section so we need to account for that +run-plugin-memory-with-libmem.so: \ + CHECK_PLUGIN_OUTPUT_COMMAND=$(MULTIARCH_SYSTEM_SRC)/validate-memory-counts.py \ + --bss-cleared $@.out -- 2.39.5

When we shut down a guest we disable the timers. However this can cause deadlock if the guest has queued some async work that is trying to advance system time and spins forever trying to wind time forward. Pay attention to the return code and bail early if we can't wind time forward. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reported-by: Elisha Hollander <just4now666666@gmail.com> --- util/qemu-timer.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) diff --git a/util/qemu-timer.c b/util/qemu-timer.c index 213114be68..6b1533bc2a 100644 --- a/util/qemu-timer.c +++ b/util/qemu-timer.c @@ -685,10 +685,17 @@ int64_t qemu_clock_advance_virtual_time(int64_t dest) { int64_t clock = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); AioContext *aio_context; + int64_t deadline; + aio_context = qemu_get_aio_context(); - while (clock < dest) { - int64_t deadline = qemu_clock_deadline_ns_all(QEMU_CLOCK_VIRTUAL, + + deadline = qemu_clock_deadline_ns_all(QEMU_CLOCK_VIRTUAL, QEMU_TIMER_ATTR_ALL); + /* + * A deadline of < 0 indicates this timer is not enabled, so we + * won't get far trying to run it forward. + */ + while (deadline >= 0 && clock < dest) { int64_t warp = qemu_soonest_timeout(dest - clock, deadline); qemu_virtual_clock_set_ns(qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + warp); @@ -696,6 +703,9 @@ int64_t qemu_clock_advance_virtual_time(int64_t dest) qemu_clock_run_timers(QEMU_CLOCK_VIRTUAL); timerlist_run_timers(aio_context->tlg.tl[QEMU_CLOCK_VIRTUAL]); clock = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); + + deadline = qemu_clock_deadline_ns_all(QEMU_CLOCK_VIRTUAL, + QEMU_TIMER_ATTR_ALL); } qemu_clock_notify(QEMU_CLOCK_VIRTUAL); -- 2.39.5

From: Akihiko Odaki <akihiko.odaki@daynix.com> SimPoint is a widely used tool to find the ideal microarchitecture simulation points so Valgrind[2] and Pin[3] support generating basic block vectors for use with them. Let's add a corresponding plugin to QEMU too. Note that this plugin has a different goal with tests/plugin/bb.c. This plugin creates a vector for each constant interval instead of counting the execution of basic blocks for the entire run and able to describe the change of execution behavior. Its output is also syntactically simple and better suited for parsing, while the output of tests/plugin/bb.c is more human-readable. [1] https://cseweb.ucsd.edu/~calder/simpoint/ [2] https://valgrind.org/docs/manual/bbv-manual.html [3] https://www.intel.com/content/www/us/en/developer/articles/tool/pin-a-dynami... Signed-off-by: Yotaro Nada <yotaro.nada@gmail.com> Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org> Message-Id: <20240816-bb-v3-1-b9aa4a5c75c5@daynix.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> --- docs/about/emulation.rst | 30 ++++++++ contrib/plugins/bbv.c | 158 +++++++++++++++++++++++++++++++++++++++ contrib/plugins/Makefile | 1 + 3 files changed, 189 insertions(+) create mode 100644 contrib/plugins/bbv.c diff --git a/docs/about/emulation.rst b/docs/about/emulation.rst index eea1261baa..a4470127c9 100644 --- a/docs/about/emulation.rst +++ b/docs/about/emulation.rst @@ -272,6 +272,36 @@ Behaviour can be tweaked with the following arguments: * - idle=true|false - Dump the current execution stats whenever the guest vCPU idles +Basic Block Vectors +................... + +``contrib/plugins/bbv.c`` + +The bbv plugin allows you to generate basic block vectors for use with the +`SimPoint <https://cseweb.ucsd.edu/~calder/simpoint/>`__ analysis tool. + +.. list-table:: Basic block vectors arguments + :widths: 20 80 + :header-rows: 1 + + * - Option + - Description + * - interval=N + - The interval to generate a basic block vector specified by the number of + instructions (Default: N = 100000000) + * - outfile=PATH + - The path to output files. + It will be suffixed with ``.N.bb`` where ``N`` is a vCPU index. + +Example:: + + $ qemu-aarch64 \ + -plugin contrib/plugins/libbbv.so,interval=100,outfile=sha1 \ + tests/tcg/aarch64-linux-user/sha1 + SHA1=15dd99a1991e0b3826fede3deffc1feba42278e6 + $ du sha1.0.bb + 23128 sha1.0.bb + Instruction ........... diff --git a/contrib/plugins/bbv.c b/contrib/plugins/bbv.c new file mode 100644 index 0000000000..a5256517dd --- /dev/null +++ b/contrib/plugins/bbv.c @@ -0,0 +1,158 @@ +/* + * Generate basic block vectors for use with the SimPoint analysis tool. + * SimPoint: https://cseweb.ucsd.edu/~calder/simpoint/ + * + * SPDX-License-Identifier: GPL-2.0-or-later + */ + +#include <stdio.h> +#include <glib.h> + +#include <qemu-plugin.h> + +typedef struct Bb { + uint64_t vaddr; + struct qemu_plugin_scoreboard *count; + unsigned int index; +} Bb; + +typedef struct Vcpu { + uint64_t count; + FILE *file; +} Vcpu; + +QEMU_PLUGIN_EXPORT int qemu_plugin_version = QEMU_PLUGIN_VERSION; +static GHashTable *bbs; +static GRWLock bbs_lock; +static char *filename; +static struct qemu_plugin_scoreboard *vcpus; +static uint64_t interval = 100000000; + +static void plugin_exit(qemu_plugin_id_t id, void *p) +{ + for (int i = 0; i < qemu_plugin_num_vcpus(); i++) { + fclose(((Vcpu *)qemu_plugin_scoreboard_find(vcpus, i))->file); + } + + g_hash_table_unref(bbs); + g_free(filename); + qemu_plugin_scoreboard_free(vcpus); +} + +static void free_bb(void *data) +{ + qemu_plugin_scoreboard_free(((Bb *)data)->count); + g_free(data); +} + +static qemu_plugin_u64 count_u64(void) +{ + return qemu_plugin_scoreboard_u64_in_struct(vcpus, Vcpu, count); +} + +static qemu_plugin_u64 bb_count_u64(Bb *bb) +{ + return qemu_plugin_scoreboard_u64(bb->count); +} + +static void vcpu_init(qemu_plugin_id_t id, unsigned int vcpu_index) +{ + g_autofree gchar *vcpu_filename = NULL; + Vcpu *vcpu = qemu_plugin_scoreboard_find(vcpus, vcpu_index); + + vcpu_filename = g_strdup_printf("%s.%u.bb", filename, vcpu_index); + vcpu->file = fopen(vcpu_filename, "w"); +} + +static void vcpu_interval_exec(unsigned int vcpu_index, void *udata) +{ + Vcpu *vcpu = qemu_plugin_scoreboard_find(vcpus, vcpu_index); + GHashTableIter iter; + void *value; + + if (!vcpu->file) { + return; + } + + vcpu->count -= interval; + + fputc('T', vcpu->file); + + g_rw_lock_reader_lock(&bbs_lock); + g_hash_table_iter_init(&iter, bbs); + + while (g_hash_table_iter_next(&iter, NULL, &value)) { + Bb *bb = value; + uint64_t bb_count = qemu_plugin_u64_get(bb_count_u64(bb), vcpu_index); + + if (!bb_count) { + continue; + } + + fprintf(vcpu->file, ":%u:%" PRIu64 " ", bb->index, bb_count); + qemu_plugin_u64_set(bb_count_u64(bb), vcpu_index, 0); + } + + g_rw_lock_reader_unlock(&bbs_lock); + fputc('\n', vcpu->file); +} + +static void vcpu_tb_trans(qemu_plugin_id_t id, struct qemu_plugin_tb *tb) +{ + uint64_t n_insns = qemu_plugin_tb_n_insns(tb); + uint64_t vaddr = qemu_plugin_tb_vaddr(tb); + Bb *bb; + + g_rw_lock_writer_lock(&bbs_lock); + bb = g_hash_table_lookup(bbs, &vaddr); + if (!bb) { + bb = g_new(Bb, 1); + bb->vaddr = vaddr; + bb->count = qemu_plugin_scoreboard_new(sizeof(uint64_t)); + bb->index = g_hash_table_size(bbs); + g_hash_table_replace(bbs, &bb->vaddr, bb); + } + g_rw_lock_writer_unlock(&bbs_lock); + + qemu_plugin_register_vcpu_tb_exec_inline_per_vcpu( + tb, QEMU_PLUGIN_INLINE_ADD_U64, count_u64(), n_insns); + + qemu_plugin_register_vcpu_tb_exec_inline_per_vcpu( + tb, QEMU_PLUGIN_INLINE_ADD_U64, bb_count_u64(bb), n_insns); + + qemu_plugin_register_vcpu_tb_exec_cond_cb( + tb, vcpu_interval_exec, QEMU_PLUGIN_CB_NO_REGS, + QEMU_PLUGIN_COND_GE, count_u64(), interval, NULL); +} + +QEMU_PLUGIN_EXPORT int qemu_plugin_install(qemu_plugin_id_t id, + const qemu_info_t *info, + int argc, char **argv) +{ + for (int i = 0; i < argc; i++) { + char *opt = argv[i]; + g_auto(GStrv) tokens = g_strsplit(opt, "=", 2); + if (g_strcmp0(tokens[0], "interval") == 0) { + interval = g_ascii_strtoull(tokens[1], NULL, 10); + } else if (g_strcmp0(tokens[0], "outfile") == 0) { + filename = tokens[1]; + tokens[1] = NULL; + } else { + fprintf(stderr, "option parsing failed: %s\n", opt); + return -1; + } + } + + if (!filename) { + fputs("outfile unspecified\n", stderr); + return -1; + } + + bbs = g_hash_table_new_full(g_int64_hash, g_int64_equal, NULL, free_bb); + vcpus = qemu_plugin_scoreboard_new(sizeof(Vcpu)); + qemu_plugin_register_atexit_cb(id, plugin_exit, NULL); + qemu_plugin_register_vcpu_init_cb(id, vcpu_init); + qemu_plugin_register_vcpu_tb_trans_cb(id, vcpu_tb_trans); + + return 0; +} diff --git a/contrib/plugins/Makefile b/contrib/plugins/Makefile index d4ac599f93..bbddd4800f 100644 --- a/contrib/plugins/Makefile +++ b/contrib/plugins/Makefile @@ -13,6 +13,7 @@ TOP_SRC_PATH = $(SRC_PATH)/../.. VPATH += $(SRC_PATH) NAMES := +NAMES += bbv NAMES += execlog NAMES += hotblocks NAMES += hotpages -- 2.39.5

From: Rowan Hart <rowanbhart@gmail.com> Signed-off-by: Rowan Hart <rowanbhart@gmail.com> Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org> Tested-by: Pierrick Bouvier <pierrick.bouvier@linaro.org> Message-Id: <20240827215329.248434-3-rowanbhart@gmail.com> [AJB: tweak fmt string for vaddr] Signed-off-by: Alex Bennée <alex.bennee@linaro.org> --- vAJB - tweak fmt string for PRIu64 v2 - add static to arch_syscall_info --- docs/about/emulation.rst | 14 ++++- tests/tcg/plugins/syscall.c | 117 ++++++++++++++++++++++++++++++++++++ 2 files changed, 130 insertions(+), 1 deletion(-) diff --git a/docs/about/emulation.rst b/docs/about/emulation.rst index a4470127c9..23e4949049 100644 --- a/docs/about/emulation.rst +++ b/docs/about/emulation.rst @@ -418,6 +418,19 @@ run:: 160 1 0 135 1 0 +Behaviour can be tweaked with the following arguments: + +.. list-table:: Syscall plugin arguments + :widths: 20 80 + :header-rows: 1 + + * - Option + - Description + * - print=true|false + - Print the number of times each syscall is called + * - log_writes=true|false + - Log the buffer of each write syscall in hexdump format + Test inline operations ...................... @@ -807,4 +820,3 @@ Other emulation features When running system emulation you can also enable deterministic execution which allows for repeatable record/replay debugging. See :ref:`Record/Replay<replay>` for more details. - diff --git a/tests/tcg/plugins/syscall.c b/tests/tcg/plugins/syscall.c index 72e1a5bf90..89dc7f49b1 100644 --- a/tests/tcg/plugins/syscall.c +++ b/tests/tcg/plugins/syscall.c @@ -22,8 +22,57 @@ typedef struct { int64_t errors; } SyscallStats; +struct SyscallInfo { + const char *name; + int64_t write_sysno; +}; + +static const struct SyscallInfo arch_syscall_info[] = { + { "aarch64", 64 }, + { "aarch64_be", 64 }, + { "alpha", 4 }, + { "arm", 4 }, + { "armeb", 4 }, + { "avr", -1 }, + { "cris", -1 }, + { "hexagon", 64 }, + { "hppa", -1 }, + { "i386", 4 }, + { "loongarch64", -1 }, + { "m68k", 4 }, + { "microblaze", 4 }, + { "microblazeel", 4 }, + { "mips", 1 }, + { "mips64", 1 }, + { "mips64el", 1 }, + { "mipsel", 1 }, + { "mipsn32", 1 }, + { "mipsn32el", 1 }, + { "or1k", -1 }, + { "ppc", 4 }, + { "ppc64", 4 }, + { "ppc64le", 4 }, + { "riscv32", 64 }, + { "riscv64", 64 }, + { "rx", -1 }, + { "s390x", -1 }, + { "sh4", -1 }, + { "sh4eb", -1 }, + { "sparc", 4 }, + { "sparc32plus", 4 }, + { "sparc64", 4 }, + { "tricore", -1 }, + { "x86_64", 1 }, + { "xtensa", 13 }, + { "xtensaeb", 13 }, + { NULL, -1 }, +}; + static GMutex lock; static GHashTable *statistics; +static GByteArray *memory_buffer; +static bool do_log_writes; +static int64_t write_sysno = -1; static SyscallStats *get_or_create_entry(int64_t num) { @@ -39,6 +88,44 @@ static SyscallStats *get_or_create_entry(int64_t num) return entry; } +/* + * Hex-dump a GByteArray to the QEMU plugin output in the format: + * 61 63 63 65 6c 09 09 20 20 20 66 70 75 09 09 09 | accel.....fpu... + * 20 6d 6f 64 75 6c 65 2d 63 6f 6d 6d 6f 6e 2e 63 | .module-common.c + */ +static void hexdump(const GByteArray *data) +{ + g_autoptr(GString) out = g_string_new(""); + + for (guint index = 0; index < data->len; index += 16) { + for (guint col = 0; col < 16; col++) { + if (index + col < data->len) { + g_string_append_printf(out, "%02x ", data->data[index + col]); + } else { + g_string_append(out, " "); + } + } + + g_string_append(out, " | "); + + for (guint col = 0; col < 16; col++) { + if (index + col >= data->len) { + break; + } + + if (g_ascii_isgraph(data->data[index + col])) { + g_string_append_printf(out, "%c", data->data[index + col]); + } else { + g_string_append(out, "."); + } + } + + g_string_append(out, "\n"); + } + + qemu_plugin_outs(out->str); +} + static void vcpu_syscall(qemu_plugin_id_t id, unsigned int vcpu_index, int64_t num, uint64_t a1, uint64_t a2, uint64_t a3, uint64_t a4, uint64_t a5, @@ -54,6 +141,14 @@ static void vcpu_syscall(qemu_plugin_id_t id, unsigned int vcpu_index, g_autofree gchar *out = g_strdup_printf("syscall #%" PRIi64 "\n", num); qemu_plugin_outs(out); } + + if (do_log_writes && num == write_sysno) { + if (qemu_plugin_read_memory_vaddr(a2, memory_buffer, a3)) { + hexdump(memory_buffer); + } else { + fprintf(stderr, "Error reading memory from vaddr %"PRIu64"\n", a2); + } + } } static void vcpu_syscall_ret(qemu_plugin_id_t id, unsigned int vcpu_idx, @@ -127,6 +222,10 @@ QEMU_PLUGIN_EXPORT int qemu_plugin_install(qemu_plugin_id_t id, if (!qemu_plugin_bool_parse(tokens[0], tokens[1], &do_print)) { fprintf(stderr, "boolean argument parsing failed: %s\n", opt); } + } else if (g_strcmp0(tokens[0], "log_writes") == 0) { + if (!qemu_plugin_bool_parse(tokens[0], tokens[1], &do_log_writes)) { + fprintf(stderr, "boolean argument parsing failed: %s\n", opt); + } } else { fprintf(stderr, "unsupported argument: %s\n", argv[i]); return -1; @@ -137,6 +236,24 @@ QEMU_PLUGIN_EXPORT int qemu_plugin_install(qemu_plugin_id_t id, statistics = g_hash_table_new_full(NULL, g_direct_equal, NULL, g_free); } + if (do_log_writes) { + for (const struct SyscallInfo *syscall_info = arch_syscall_info; + syscall_info->name != NULL; syscall_info++) { + + if (g_strcmp0(syscall_info->name, info->target_name) == 0) { + write_sysno = syscall_info->write_sysno; + break; + } + } + + if (write_sysno == -1) { + fprintf(stderr, "write syscall number not found\n"); + return -1; + } + + memory_buffer = g_byte_array_new(); + } + qemu_plugin_register_vcpu_syscall_cb(id, vcpu_syscall); qemu_plugin_register_vcpu_syscall_ret_cb(id, vcpu_syscall_ret); qemu_plugin_register_atexit_cb(id, plugin_exit, NULL); -- 2.39.5