hi, i want the kvm guest machine to connect to network using macvtap.. I tried this vepa mode it is also not working. My test environment Host os=rhel6.1 Guest os = rhel6.1 Libvirt=0.8.7 Kvm hypervisor I have made this entry in guest xml file <interface type='direct'> <source dev='eth0' mode='bridge'/> <model type='virtio'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> Now when I start the guest #virsh start guest Following macvtap0 is created on host and is shown below #ip link show macvtap0 51: macvtap0@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UNKNOWN qlen 500 link/ether 52:54:00:55:AE:B5brd ff:ff:ff:ff:ff:ff but when the guest is up and I try to perform # ifup eth0 eth0 has same mac address as that of macvatap0 that is 52:54:00:55:AE:B5 due to this guest is not able to get dhcp address nor static ip address is working. Please let me know how macvtap work on kvm. -----Original Message----- From: Gerhard Stenzel [mailto:gstenzel@linux.vnet.ibm.com] Sent: Thursday, December 15, 2011 3:47 PM To: Amit Tewari Cc: libvir-list@redhat.com Subject: Re: [libvirt] FW: macvtap not working on rhel 6.1 x86 machine On Thu, 2011-12-15 at 15:20 +0530, Amit Tewari wrote:

Hi all,

My test environment

Host os=rhel6.1 x86 machine

Guest os = rhel6.1

Libvirt=0.8.7

Kvm hypervisor

Hi, maybe it would help if you try to explain first, what you are trying to achieve, what your setup looks like (including your DHCP setup and switch infrastructure). Here (http://libvirt.org/formatdomain.html) you will find the following xml sample, which works: ... <devices> <interface type='direct'> <source dev='eth0' mode='vepa'/> </interface> </devices> ... This will connect your VM directly to the same network as eth0. Please be aware that, depending on your switch configuration (supports hair pin mode or not), your host might not be able to talk to your VM and vice versa. -- Best regards, Gerhard Stenzel, ----------------------------------------------------------------------------------------------------------------------------------- IBM Deutschland Research & Development GmbH Vorsitzender des Aufsichtsrats: Martin Jetter Geschäftsführung: Dirk Wittkopp Sitz der Gesellschaft: Böblingen Registergericht: Amtsgericht Stuttgart, HRB 243294 DISCLAIMER: ----------------------------------------------------------------------------------------------------------------------- The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only. It shall not attach any liability on the originator or NECHCL or its affiliates. Any views or opinions presented in this email are solely those of the author and may not necessarily reflect the opinions of NECHCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without the prior written consent of the author of this e-mail is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately. . -----------------------------------------------------------------------------------------------------------------------