8:21 a.m.
These are the patches Debian is currently carrying on 0.9.12. Most are
straight cherry-picks. Since we're maintaining 0.9.12 for our current
stable release I'm happy to push these to v0.9.12-maint.
The only change over v2 is the adjuste commit message.
Daniel P. Berrange (2):
Don't ignore return value of qemuProcessKill
Fix race condition when destroying guests
Eric Blake (1):
build: fix virnetlink on glibc 2.11
Jiri Denemark (3):
daemon: Fix crash in virTypedParameterArrayClear
Revert "rpc: Discard non-blocking calls only when necessary"
qemu: Add support for -no-user-config
Luca Tettamanti (1):
storage: Need to also VIR_FREE(reg)
Martin Kletzander (1):
security: Fix libvirtd crash possibility
Peter Krempa (4):
qemu: Fix off-by-one error while unescaping monitor strings
rpc: Fix crash on error paths of message dispatching
conf: Remove callback from stream when freeing entries in console hash
conf: Remove console stream callback only when freeing console helper
cfg.mk | 3 +-
daemon/remote.c | 16 +-
src/conf/virconsole.c | 13 ++
src/qemu/qemu_capabilities.c | 7 +-
src/qemu/qemu_capabilities.h | 1 +
src/qemu/qemu_command.c | 11 +-
src/qemu/qemu_driver.c | 21 ++-
src/qemu/qemu_monitor.c | 11 +-
src/rpc/virnetclient.c | 21 +--
src/rpc/virnetserverclient.c | 3 +
src/rpc/virnetserverprogram.c | 11 +-
src/storage/storage_backend_logical.c | 5 +-
src/util/virnetlink.h | 2 +
tests/qemuhelpdata/qemu-1.1 | 268 ++++++++++++++++++++++++++++++++++
tests/qemuhelpdata/qemu-1.1-device | 160 ++++++++++++++++++++
tests/qemuhelptest.c | 75 ++++++++++
16 files changed, 586 insertions(+), 42 deletions(-)
create mode 100644 tests/qemuhelpdata/qemu-1.1
create mode 100644 tests/qemuhelpdata/qemu-1.1-device
--
1.8.4.rc3
8:21 a.m.
New subject: [libvirt] [v0.9.12-maint v3 01/12] daemon: Fix crash in virTypedParameterArrayClear
From: Jiri Denemark <jdenemar(a)redhat.com>
Daemon uses the following pattern when dispatching APIs with typed
parameters:
VIR_ALLOC_N(params, nparams);
virDomain*(dom, params, &nparams, flags);
virTypedParameterArrayClear(params, nparams);
In case nparams was originally set to 0, virDomain* API would fill it
with the number of typed parameters it can provide and we would use this
number (rather than zero) to clear params. Because VIR_ALLOC* returns
non-NULL pointer even if size is 0, the code would end up walking
through random memory. If we were lucky enough and the memory contained
7 (VIR_TYPED_PARAM_STRING) at the right place, we would try to free a
random pointer and crash.
Let's make sure params stays NULL when nparams is 0.
(cherry picked from commit 6039a2cb49c8af4c68460d2faf365a7e1c686c7b)
---
daemon/remote.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/daemon/remote.c b/daemon/remote.c
index 16a8a05..4ece019 100644
--- a/daemon/remote.c
+++ b/daemon/remote.c
@@ -964,7 +964,7 @@ remoteDispatchDomainGetSchedulerParameters(virNetServerPtr server
ATTRIBUTE_UNUS
virNetError(VIR_ERR_INTERNAL_ERROR, "%s", _("nparams too
large"));
goto cleanup;
}
- if (VIR_ALLOC_N(params, nparams) < 0)
+ if (nparams && VIR_ALLOC_N(params, nparams) < 0)
goto no_memory;
if (!(dom = get_nonnull_domain(priv->conn, args->dom)))
@@ -1019,7 +1019,7 @@ remoteDispatchDomainGetSchedulerParametersFlags(virNetServerPtr
server ATTRIBUTE
virNetError(VIR_ERR_INTERNAL_ERROR, "%s", _("nparams too
large"));
goto cleanup;
}
- if (VIR_ALLOC_N(params, nparams) < 0)
+ if (nparams && VIR_ALLOC_N(params, nparams) < 0)
goto no_memory;
if (!(dom = get_nonnull_domain(priv->conn, args->dom)))
@@ -1200,7 +1200,7 @@ remoteDispatchDomainBlockStatsFlags(virNetServerPtr server
ATTRIBUTE_UNUSED,
virNetError(VIR_ERR_INTERNAL_ERROR, "%s", _("nparams too
large"));
goto cleanup;
}
- if (VIR_ALLOC_N(params, nparams) < 0) {
+ if (nparams && VIR_ALLOC_N(params, nparams) < 0) {
virReportOOMError();
goto cleanup;
}
@@ -1674,7 +1674,7 @@ remoteDispatchDomainGetMemoryParameters(virNetServerPtr server
ATTRIBUTE_UNUSED,
virNetError(VIR_ERR_INTERNAL_ERROR, "%s", _("nparams too
large"));
goto cleanup;
}
- if (VIR_ALLOC_N(params, nparams) < 0) {
+ if (nparams && VIR_ALLOC_N(params, nparams) < 0) {
virReportOOMError();
goto cleanup;
}
@@ -1739,7 +1739,7 @@ remoteDispatchDomainGetNumaParameters(virNetServerPtr server
ATTRIBUTE_UNUSED,
virNetError(VIR_ERR_INTERNAL_ERROR, "%s", _("nparams too
large"));
goto cleanup;
}
- if (VIR_ALLOC_N(params, nparams) < 0) {
+ if (nparams && VIR_ALLOC_N(params, nparams) < 0) {
virReportOOMError();
goto cleanup;
}
@@ -1804,7 +1804,7 @@ remoteDispatchDomainGetBlkioParameters(virNetServerPtr server
ATTRIBUTE_UNUSED,
virNetError(VIR_ERR_INTERNAL_ERROR, "%s", _("nparams too
large"));
goto cleanup;
}
- if (VIR_ALLOC_N(params, nparams) < 0) {
+ if (nparams && VIR_ALLOC_N(params, nparams) < 0) {
virReportOOMError();
goto cleanup;
}
@@ -2064,7 +2064,7 @@ remoteDispatchDomainGetBlockIoTune(virNetServerPtr server
ATTRIBUTE_UNUSED,
goto cleanup;
}
- if (VIR_ALLOC_N(params, nparams) < 0) {
+ if (nparams && VIR_ALLOC_N(params, nparams) < 0) {
virReportOOMError();
goto cleanup;
}
@@ -3567,7 +3567,7 @@ remoteDispatchDomainGetInterfaceParameters(virNetServerPtr server
ATTRIBUTE_UNUS
virNetError(VIR_ERR_INTERNAL_ERROR, "%s", _("nparams too
large"));
goto cleanup;
}
- if (VIR_ALLOC_N(params, nparams) < 0) {
+ if (nparams && VIR_ALLOC_N(params, nparams) < 0) {
virReportOOMError();
goto cleanup;
}
--
1.8.4.rc3
8:21 a.m.
New subject: [libvirt] [v0.9.12-maint v3 02/12] security: Fix libvirtd crash possibility
From: Martin Kletzander <mkletzan(a)redhat.com>
Fix for CVE-2012-4423.
When generating RPC protocol messages, it's strictly needed to have a
continuous line of numbers or RPC messages. However in case anyone
tries backporting some functionality and will skip a number, there is
a possibility to make the daemon segfault with newer virsh (version of
the library, rpc call, etc.) even unintentionally.
The problem is that the skipped numbers will get func filled with
NULLs, but there is no check whether these are set before the daemon
tries to run them. This patch very simply enhances one check and fixes
that.
(cherry picked from commit b7ff9e696063189a715802d081d55a398663c15a)
---
src/rpc/virnetserverprogram.c | 11 +++++++++--
1 file changed, 9 insertions(+), 2 deletions(-)
diff --git a/src/rpc/virnetserverprogram.c b/src/rpc/virnetserverprogram.c
index 7f589c8..5439878 100644
--- a/src/rpc/virnetserverprogram.c
+++ b/src/rpc/virnetserverprogram.c
@@ -1,7 +1,7 @@
/*
* virnetserverprogram.c: generic network RPC server program
*
- * Copyright (C) 2006-2011 Red Hat, Inc.
+ * Copyright (C) 2006-2012 Red Hat, Inc.
* Copyright (C) 2006 Daniel P. Berrange
*
* This library is free software; you can redistribute it and/or
@@ -101,12 +101,19 @@ int virNetServerProgramMatches(virNetServerProgramPtr prog,
static virNetServerProgramProcPtr virNetServerProgramGetProc(virNetServerProgramPtr
prog,
int procedure)
{
+ virNetServerProgramProcPtr proc;
+
if (procedure < 0)
return NULL;
if (procedure >= prog->nprocs)
return NULL;
- return &prog->procs[procedure];
+ proc = &prog->procs[procedure];
+
+ if (!proc->func)
+ return NULL;
+
+ return proc;
}
unsigned int
--
1.8.4.rc3
8:21 a.m.
New subject: [libvirt] [v0.9.12-maint v3 03/12] build: fix virnetlink on glibc 2.11
From: Eric Blake <eblake(a)redhat.com>
We were being lazy - virnetlink.c was getting uint32_t as a
side-effect from glibc 2.14's <unistd.h>, but older glibc 2.11
does not provide uint32_t from <unistd.h>. In fact, POSIX states
that <unistd.h> need only provide intptr_t, not all of <stdint.h>,
so the bug really is ours. Reported by Jonathan Alescio.
* src/util/virnetlink.h: Include <stdint.h>.
(cherry picked from commit e8314e78f9c5d5ad84cfda5c61000e50d91c4a1e)
---
src/util/virnetlink.h | 2 ++
1 file changed, 2 insertions(+)
diff --git a/src/util/virnetlink.h b/src/util/virnetlink.h
index bafe8ca..8ec27c9 100644
--- a/src/util/virnetlink.h
+++ b/src/util/virnetlink.h
@@ -23,6 +23,8 @@
# include "config.h"
# include "internal.h"
+# include <stdint.h>
+
# if defined(__linux__) && defined(HAVE_LIBNL)
# include <netlink/msg.h>
--
1.8.4.rc3
8:21 a.m.
New subject: [libvirt] [v0.9.12-maint v3 04/12] Revert "rpc: Discard non-blocking calls only when necessary"
From: Jiri Denemark <jdenemar(a)redhat.com>
This reverts commit b1e374a7ac56927cfe62435179bf0bba1e08b372, which was
rather bad since I failed to consider all sides of the issue. The main
things I didn't consider properly are:
- a thread which sends a non-blocking call waits for the thread with
the buck to process the call
- the code doesn't expect non-blocking calls to remain in the queue
unless they were already partially sent
Thus, the reverted patch actually breaks more than what it fixes and
clients (which may even be libvirtd during p2p migrations) will likely
end up in a deadlock.
(cherry picked from commit 63643f67abcdeaa33a0f85ea8e54da75ea9908e4)
---
src/rpc/virnetclient.c | 21 ++++++++++++---------
1 file changed, 12 insertions(+), 9 deletions(-)
diff --git a/src/rpc/virnetclient.c b/src/rpc/virnetclient.c
index 3a60db6..d88288d 100644
--- a/src/rpc/virnetclient.c
+++ b/src/rpc/virnetclient.c
@@ -1265,13 +1265,6 @@ static void virNetClientIOEventLoopPassTheBuck(virNetClientPtr
client, virNetCli
}
client->haveTheBuck = false;
- /* Remove non-blocking calls from the dispatch list since there is no
- * call with a thread in the list which could take care of them.
- */
- virNetClientCallRemovePredicate(&client->waitDispatch,
- virNetClientIOEventLoopRemoveNonBlocking,
- thiscall);
-
VIR_DEBUG("No thread to pass the buck to");
if (client->wantClose) {
virNetClientCloseLocked(client);
@@ -1315,9 +1308,12 @@ static int virNetClientIOEventLoop(virNetClientPtr client,
if (virNetSocketHasCachedData(client->sock) || client->wantClose)
timeout = 0;
- /* If we are non-blocking, we don't want to sleep in poll()
+ /* If there are any non-blocking calls in the queue,
+ * then we don't want to sleep in poll()
*/
- if (thiscall->nonBlock)
+ if (virNetClientCallMatchPredicate(client->waitDispatch,
+ virNetClientIOEventLoopWantNonBlock,
+ NULL))
timeout = 0;
fds[0].events = fds[0].revents = 0;
@@ -1422,6 +1418,13 @@ static int virNetClientIOEventLoop(virNetClientPtr client,
virNetClientIOEventLoopRemoveDone,
thiscall);
+ /* Iterate through waiting calls and if any are
+ * non-blocking, remove them from the dispatch list...
+ */
+ virNetClientCallRemovePredicate(&client->waitDispatch,
+ virNetClientIOEventLoopRemoveNonBlocking,
+ thiscall);
+
/* Now see if *we* are done */
if (thiscall->mode == VIR_NET_CLIENT_MODE_COMPLETE) {
virNetClientCallRemove(&client->waitDispatch, thiscall);
--
1.8.4.rc3
8:21 a.m.
New subject: [libvirt] [v0.9.12-maint v3 05/12] qemu: Fix off-by-one error while unescaping monitor strings
From: Peter Krempa <pkrempa(a)redhat.com>
While unescaping the commands the commands passed through to the monitor
function qemuMonitorUnescapeArg() initialized lenght of the input string
to strlen()+1 which is fine for alloc but not for iteration of the
string.
This patch fixes the off-by-one error and drops the pointless check for
a single trailing slash that is automaticaly handled by the default
branch of switch.
(cherry picked from commit 0f4660c8787cc41fe67f869984c0ae11d680037e)
---
src/qemu/qemu_monitor.c | 11 +++--------
1 file changed, 3 insertions(+), 8 deletions(-)
diff --git a/src/qemu/qemu_monitor.c b/src/qemu/qemu_monitor.c
index 0d4319d..68ecdb9 100644
--- a/src/qemu/qemu_monitor.c
+++ b/src/qemu/qemu_monitor.c
@@ -157,20 +157,15 @@ char *qemuMonitorUnescapeArg(const char *in)
{
int i, j;
char *out;
- int len = strlen(in) + 1;
+ int len = strlen(in);
char next;
- if (VIR_ALLOC_N(out, len) < 0)
+ if (VIR_ALLOC_N(out, len + 1) < 0)
return NULL;
for (i = j = 0; i < len; ++i) {
next = in[i];
if (in[i] == '\\') {
- if (len < i + 1) {
- /* trailing backslash shouldn't be possible */
- VIR_FREE(out);
- return NULL;
- }
++i;
switch(in[i]) {
case 'r':
@@ -184,7 +179,7 @@ char *qemuMonitorUnescapeArg(const char *in)
next = in[i];
break;
default:
- /* invalid input */
+ /* invalid input (including trailing '\' at end of in) */
VIR_FREE(out);
return NULL;
}
--
1.8.4.rc3
8:21 a.m.
New subject: [libvirt] [v0.9.12-maint v3 06/12] rpc: Fix crash on error paths of message dispatching
From: Peter Krempa <pkrempa(a)redhat.com>
This patch resolves CVE-2013-0170:
https://bugzilla.redhat.com/show_bug.cgi?id=893450
When reading and dispatching of a message failed the message was freed
but wasn't removed from the message queue.
After that when the connection was about to be closed the pointer for
the message was still present in the queue and it was passed to
virNetMessageFree which tried to call the callback function from an
uninitialized pointer.
This patch removes the message from the queue before it's freed.
* rpc/virnetserverclient.c: virNetServerClientDispatchRead:
- avoid use after free of RPC messages
(cherry picked from commit 46532e3e8ed5f5a736a02f67d6c805492f9ca720)
---
src/rpc/virnetserverclient.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/src/rpc/virnetserverclient.c b/src/rpc/virnetserverclient.c
index 67600fd..3838136 100644
--- a/src/rpc/virnetserverclient.c
+++ b/src/rpc/virnetserverclient.c
@@ -840,6 +840,7 @@ readmore:
/* Decode the header so we can use it for routing decisions */
if (virNetMessageDecodeHeader(msg) < 0) {
+ virNetMessageQueueServe(&client->rx);
virNetMessageFree(msg);
client->wantClose = true;
return;
@@ -849,6 +850,7 @@ readmore:
* file descriptors */
if (msg->header.type == VIR_NET_CALL_WITH_FDS &&
virNetMessageDecodeNumFDs(msg) < 0) {
+ virNetMessageQueueServe(&client->rx);
virNetMessageFree(msg);
client->wantClose = true;
return; /* Error */
@@ -858,6 +860,7 @@ readmore:
for (i = msg->donefds ; i < msg->nfds ; i++) {
int rv;
if ((rv = virNetSocketRecvFD(client->sock, &(msg->fds[i]))) < 0)
{
+ virNetMessageQueueServe(&client->rx);
virNetMessageFree(msg);
client->wantClose = true;
return;
--
1.8.4.rc3
8:21 a.m.
New subject: [libvirt] [v0.9.12-maint v3 07/12] qemu: Add support for -no-user-config
From: Jiri Denemark <jdenemar(a)redhat.com>
Thanks to this new option we are now able to use modern CPU models (such
as Westmere) defined in external configuration file.
The qemu-1.1{,-device} data files for qemuhelptest are filled in with
qemu-1.1-rc2 output for now. I will update those files with real
qemu-1.1 output once it is released.
(cherry picked from commit 63b4243624b8fdabebaf5e6ec912095b2b5fdf5c)
---
cfg.mk | 3 +-
src/qemu/qemu_capabilities.c | 7 +-
src/qemu/qemu_capabilities.h | 1 +
src/qemu/qemu_command.c | 11 +-
src/qemu/qemu_driver.c | 2 +-
tests/qemuhelpdata/qemu-1.1 | 268 +++++++++++++++++++++++++++++++++++++
tests/qemuhelpdata/qemu-1.1-device | 160 ++++++++++++++++++++++
tests/qemuhelptest.c | 75 +++++++++++
8 files changed, 519 insertions(+), 8 deletions(-)
create mode 100644 tests/qemuhelpdata/qemu-1.1
create mode 100644 tests/qemuhelpdata/qemu-1.1-device
diff --git a/cfg.mk b/cfg.mk
index 9dab3c3..67141a9 100644
--- a/cfg.mk
+++ b/cfg.mk
@@ -823,7 +823,8 @@ exclude_file_name_regexp--sc_require_config_h = ^examples/
exclude_file_name_regexp--sc_require_config_h_first = ^examples/
-exclude_file_name_regexp--sc_trailing_blank = \.(fig|gif|ico|png)$$
+exclude_file_name_regexp--sc_trailing_blank = \
+ (/qemuhelpdata/|\.(fig|gif|ico|png)$$)
exclude_file_name_regexp--sc_unmarked_diagnostics = \
^(docs/apibuild.py|tests/virt-aa-helper-test)$$
diff --git a/src/qemu/qemu_capabilities.c b/src/qemu/qemu_capabilities.c
index 6e5165b..a3c87d1 100644
--- a/src/qemu/qemu_capabilities.c
+++ b/src/qemu/qemu_capabilities.c
@@ -161,6 +161,7 @@ VIR_ENUM_IMPL(qemuCaps, QEMU_CAPS_LAST,
"block-job-async",
"scsi-cd",
"ide-cd",
+ "no-user-config",
);
struct qemu_feature_flags {
@@ -1082,6 +1083,8 @@ qemuCapsComputeCmdFlags(const char *help,
}
if (strstr(help, "-nodefconfig"))
qemuCapsSet(flags, QEMU_CAPS_NODEFCONFIG);
+ if (strstr(help, "-no-user-config"))
+ qemuCapsSet(flags, QEMU_CAPS_NO_USER_CONFIG);
/* The trailing ' ' is important to avoid a bogus match */
if (strstr(help, "-rtc "))
qemuCapsSet(flags, QEMU_CAPS_RTC);
@@ -1634,7 +1637,9 @@ qemuCapsProbeCommand(const char *qemu,
virCommandPtr cmd = virCommandNew(qemu);
if (qemuCaps) {
- if (qemuCapsGet(qemuCaps, QEMU_CAPS_NODEFCONFIG))
+ if (qemuCapsGet(qemuCaps, QEMU_CAPS_NO_USER_CONFIG))
+ virCommandAddArg(cmd, "-no-user-config");
+ else if (qemuCapsGet(qemuCaps, QEMU_CAPS_NODEFCONFIG))
virCommandAddArg(cmd, "-nodefconfig");
}
diff --git a/src/qemu/qemu_capabilities.h b/src/qemu/qemu_capabilities.h
index 7a6c5a0..0e0899e 100644
--- a/src/qemu/qemu_capabilities.h
+++ b/src/qemu/qemu_capabilities.h
@@ -129,6 +129,7 @@ enum qemuCapsFlags {
QEMU_CAPS_BLOCKJOB_ASYNC = 91, /* qemu 1.1 block-job-cancel */
QEMU_CAPS_SCSI_CD = 92, /* -device scsi-cd */
QEMU_CAPS_IDE_CD = 93, /* -device ide-cd */
+ QEMU_CAPS_NO_USER_CONFIG = 94, /* -no-user-config */
QEMU_CAPS_LAST, /* this must always be the last item */
};
diff --git a/src/qemu/qemu_command.c b/src/qemu/qemu_command.c
index 117542f..8d14d41 100644
--- a/src/qemu/qemu_command.c
+++ b/src/qemu/qemu_command.c
@@ -4237,11 +4237,12 @@ qemuBuildCommandLine(virConnectPtr conn,
virCommandAddArg(cmd, "-nographic");
if (qemuCapsGet(qemuCaps, QEMU_CAPS_DEVICE)) {
- if (qemuCapsGet(qemuCaps, QEMU_CAPS_NODEFCONFIG))
- virCommandAddArg(cmd,
- "-nodefconfig"); /* Disable global config files
*/
- virCommandAddArg(cmd,
- "-nodefaults"); /* Disable default guest devices */
+ /* Disable global config files and default devices */
+ if (qemuCapsGet(qemuCaps, QEMU_CAPS_NO_USER_CONFIG))
+ virCommandAddArg(cmd, "-no-user-config");
+ else if (qemuCapsGet(qemuCaps, QEMU_CAPS_NODEFCONFIG))
+ virCommandAddArg(cmd, "-nodefconfig");
+ virCommandAddArg(cmd, "-nodefaults");
}
/* Serial graphics adapter */
diff --git a/src/qemu/qemu_driver.c b/src/qemu/qemu_driver.c
index 385b861..0053ed1 100644
--- a/src/qemu/qemu_driver.c
+++ b/src/qemu/qemu_driver.c
@@ -4898,7 +4898,7 @@ qemudCanonicalizeMachineDirect(virDomainDefPtr def, char
**canonical)
int i, nmachines = 0;
/* XXX we should be checking emulator capabilities and pass them instead
- * of NULL so that -nodefconfig is properly added when
+ * of NULL so that -nodefconfig or -no-user-config is properly added when
* probing machine types. Luckily, qemu does not support specifying new
* machine types in its configuration files yet, which means passing this
* additional parameter makes no difference now.
diff --git a/tests/qemuhelpdata/qemu-1.1 b/tests/qemuhelpdata/qemu-1.1
new file mode 100644
index 0000000..79bc8ba
--- /dev/null
+++ b/tests/qemuhelpdata/qemu-1.1
@@ -0,0 +1,268 @@
+QEMU emulator version 1.0.92, Copyright (c) 2003-2008 Fabrice Bellard
+usage: qemu-system-x86_64 [options] [disk_image]
+
+'disk_image' is a raw hard disk image for IDE hard disk 0
+
+Standard options:
+-h or -help display this help and exit
+-version display version information and exit
+-machine [type=]name[,prop[=value][,...]]
+ selects emulated machine (-machine ? for list)
+ property accel=accel1[:accel2[:...]] selects accelerator
+ supported accelerators are kvm, xen, tcg (default: tcg)
+ kernel_irqchip=on|off controls accelerated irqchip support
+ kvm_shadow_mem=size of KVM shadow MMU
+-cpu cpu select CPU (-cpu ? for list)
+-smp n[,maxcpus=cpus][,cores=cores][,threads=threads][,sockets=sockets]
+ set the number of CPUs to 'n' [default=1]
+ maxcpus= maximum number of total cpus, including
+ offline CPUs for hotplug, etc
+ cores= number of CPU cores on one socket
+ threads= number of threads on one CPU core
+ sockets= number of discrete sockets in the system
+-numa node[,mem=size][,cpus=cpu[-cpu]][,nodeid=node]
+-fda/-fdb file use 'file' as floppy disk 0/1 image
+-hda/-hdb file use 'file' as IDE hard disk 0/1 image
+-hdc/-hdd file use 'file' as IDE hard disk 2/3 image
+-cdrom file use 'file' as IDE cdrom image (cdrom is ide1 master)
+-drive [file=file][,if=type][,bus=n][,unit=m][,media=d][,index=i]
+ [,cyls=c,heads=h,secs=s[,trans=t]][,snapshot=on|off]
+ [,cache=writethrough|writeback|none|directsync|unsafe][,format=f]
+ [,serial=s][,addr=A][,id=name][,aio=threads|native]
+ [,readonly=on|off][,copy-on-read=on|off]
+ [[,bps=b]|[[,bps_rd=r][,bps_wr=w]]][[,iops=i]|[[,iops_rd=r][,iops_wr=w]]
+ use 'file' as a drive image
+-set group.id.arg=value
+ set <arg> parameter for item <id> of type <group>
+ i.e. -set drive.$id.file=/path/to/image
+-global driver.prop=value
+ set a global default for a driver property
+-mtdblock file use 'file' as on-board Flash memory image
+-sd file use 'file' as SecureDigital card image
+-pflash file use 'file' as a parallel flash image
+-boot [order=drives][,once=drives][,menu=on|off]
+ [,splash=sp_name][,splash-time=sp_time]
+ 'drives': floppy (a), hard disk (c), CD-ROM (d), network (n)
+ 'sp_name': the file's name that would be passed to bios as
logo picture, if menu=on
+ 'sp_time': the period that splash picture last if menu=on, unit
is ms
+-snapshot write to temporary files instead of disk image files
+-m megs set virtual RAM size to megs MB [default=128]
+-mem-path FILE provide backing storage for guest RAM
+-mem-prealloc preallocate guest memory (use with -mem-path)
+-k language use keyboard layout (for example 'fr' for French)
+-audio-help print list of audio drivers and their options
+-soundhw c1,... enable audio support
+ and only specified sound cards (comma separated list)
+ use -soundhw ? to get the list of supported cards
+ use -soundhw all to enable all of them
+-balloon none disable balloon device
+-balloon virtio[,addr=str]
+ enable virtio balloon device (default)
+-usb enable the USB driver (will be the default soon)
+-usbdevice name add the host or guest USB device 'name'
+-device driver[,prop[=value][,...]]
+ add device (based on driver)
+ prop=value,... sets driver properties
+ use -device ? to print all possible drivers
+ use -device driver,? to print all possible properties
+
+File system options:
+-fsdev
fsdriver,id=id[,path=path,][security_model={mapped-xattr|mapped-file|passthrough|none}]
+ [,writeout=immediate][,readonly][,socket=socket|sock_fd=sock_fd]
+
+Virtual File system pass-through options:
+-virtfs
local,path=path,mount_tag=tag,security_model=[mapped-xattr|mapped-file|passthrough|none]
+ [,writeout=immediate][,readonly][,socket=socket|sock_fd=sock_fd]
+-virtfs_synth Create synthetic file system image
+
+-name string1[,process=string2]
+ set the name of the guest
+ string1 sets the window title and string2 the process name (on Linux)
+-uuid %08x-%04x-%04x-%04x-%012x
+ specify machine UUID
+
+Display options:
+-display sdl[,frame=on|off][,alt_grab=on|off][,ctrl_grab=on|off]
+ [,window_close=on|off]|curses|none|
+ vnc=<display>[,<optargs>]
+ select display type
+-nographic disable graphical output and redirect serial I/Os to console
+-curses use a curses/ncurses interface instead of SDL
+-no-frame open SDL window without a frame and window decorations
+-alt-grab use Ctrl-Alt-Shift to grab mouse (instead of Ctrl-Alt)
+-ctrl-grab use Right-Ctrl to grab mouse (instead of Ctrl-Alt)
+-no-quit disable SDL window close capability
+-sdl enable SDL
+-spice <args> enable spice
+-portrait rotate graphical output 90 deg left (only PXA LCD)
+-rotate <deg> rotate graphical output some deg left (only PXA LCD)
+-vga [std|cirrus|vmware|qxl|xenfb|none]
+ select video card type
+-full-screen start in full screen
+-vnc display start a VNC server on display
+
+i386 target only:
+-win2k-hack use it when installing Windows 2000 to avoid a disk full bug
+-no-fd-bootchk disable boot signature checking for floppy disks
+-no-acpi disable ACPI
+-no-hpet disable HPET
+-acpitable
[sig=str][,rev=n][,oem_id=str][,oem_table_id=str][,oem_rev=n][,asl_compiler_id=str][,asl_compiler_rev=n][,{data|file}=file1[:file2]...]
+ ACPI table description
+-smbios file=binary
+ load SMBIOS entry from binary file
+-smbios type=0[,vendor=str][,version=str][,date=str][,release=%d.%d]
+ specify SMBIOS type 0 fields
+-smbios type=1[,manufacturer=str][,product=str][,version=str][,serial=str]
+ [,uuid=uuid][,sku=str][,family=str]
+ specify SMBIOS type 1 fields
+
+Network options:
+-net nic[,vlan=n][,macaddr=mac][,model=type][,name=str][,addr=str][,vectors=v]
+ create a new Network Interface Card and connect it to VLAN 'n'
+-net user[,vlan=n][,name=str][,net=addr[/mask]][,host=addr][,restrict=on|off]
+ [,hostname=host][,dhcpstart=addr][,dns=addr][,tftp=dir][,bootfile=f]
+ [,hostfwd=rule][,guestfwd=rule][,smb=dir[,smbserver=addr]]
+ connect the user mode network stack to VLAN 'n', configure its
+ DHCP server and enabled optional services
+-net
tap[,vlan=n][,name=str][,fd=h][,ifname=name][,script=file][,downscript=dfile][,helper=helper][,sndbuf=nbytes][,vnet_hdr=on|off][,vhost=on|off][,vhostfd=h][,vhostforce=on|off]
+ connect the host TAP network interface to VLAN 'n'
+ use network scripts 'file' (default=/etc/qemu-ifup)
+ to configure it and 'dfile' (default=/etc/qemu-ifdown)
+ to deconfigure it
+ use '[down]script=no' to disable script execution
+ use network helper 'helper'
(default=/usr/libexec/qemu-bridge-helper) to
+ configure it
+ use 'fd=h' to connect to an already opened TAP interface
+ use 'sndbuf=nbytes' to limit the size of the send buffer (the
+ default is disabled 'sndbuf=0' to enable flow control set
'sndbuf=1048576')
+ use vnet_hdr=off to avoid enabling the IFF_VNET_HDR tap flag
+ use vnet_hdr=on to make the lack of IFF_VNET_HDR support an error
condition
+ use vhost=on to enable experimental in kernel accelerator
+ (only has effect for virtio guests which use MSIX)
+ use vhostforce=on to force vhost on for non-MSIX virtio guests
+ use 'vhostfd=h' to connect to an already opened vhost net device
+-net bridge[,vlan=n][,name=str][,br=bridge][,helper=helper]
+ connects a host TAP network interface to a host bridge device
'br'
+ (default=br0) using the program 'helper'
+ (default=/usr/libexec/qemu-bridge-helper)
+-net socket[,vlan=n][,name=str][,fd=h][,listen=[host]:port][,connect=host:port]
+ connect the vlan 'n' to another VLAN using a socket connection
+-net socket[,vlan=n][,name=str][,fd=h][,mcast=maddr:port[,localaddr=addr]]
+ connect the vlan 'n' to multicast maddr and port
+ use 'localaddr=addr' to specify the host address to send packets
from
+-net socket[,vlan=n][,name=str][,fd=h][,udp=host:port][,localaddr=host:port]
+ connect the vlan 'n' to another VLAN using an UDP tunnel
+-net dump[,vlan=n][,file=f][,len=n]
+ dump traffic on vlan 'n' to file 'f' (max n bytes per
packet)
+-net none use it alone to have zero network devices. If no -net option
+ is provided, the default is '-net nic -net user'
+-netdev [user|tap|bridge|socket],id=str[,option][,option][,...]
+
+Character device options:
+-chardev null,id=id[,mux=on|off]
+-chardev socket,id=id[,host=host],port=host[,to=to][,ipv4][,ipv6][,nodelay]
+ [,server][,nowait][,telnet][,mux=on|off] (tcp)
+-chardev socket,id=id,path=path[,server][,nowait][,telnet],[mux=on|off] (unix)
+-chardev udp,id=id[,host=host],port=port[,localaddr=localaddr]
+ [,localport=localport][,ipv4][,ipv6][,mux=on|off]
+-chardev msmouse,id=id[,mux=on|off]
+-chardev vc,id=id[[,width=width][,height=height]][[,cols=cols][,rows=rows]]
+ [,mux=on|off]
+-chardev file,id=id,path=path[,mux=on|off]
+-chardev pipe,id=id,path=path[,mux=on|off]
+-chardev pty,id=id[,mux=on|off]
+-chardev stdio,id=id[,mux=on|off][,signal=on|off]
+-chardev tty,id=id,path=path[,mux=on|off]
+-chardev parport,id=id,path=path[,mux=on|off]
+-chardev spicevmc,id=id,name=name[,debug=debug]
+
+-iscsi [user=user][,password=password]
+ [,header-digest=CRC32C|CR32C-NONE|NONE-CRC32C|NONE
+ [,initiator-name=iqn]
+ iSCSI session parameters
+Bluetooth(R) options:
+-bt hci,null dumb bluetooth HCI - doesn't respond to commands
+-bt hci,host[:id]
+ use host's HCI with the given name
+-bt hci[,vlan=n]
+ emulate a standard HCI in virtual scatternet 'n'
+-bt vhci[,vlan=n]
+ add host computer to virtual scatternet 'n' using VHCI
+-bt device:dev[,vlan=n]
+ emulate a bluetooth device 'dev' in scatternet 'n'
+
+Linux/Multiboot boot specific:
+-kernel bzImage use 'bzImage' as kernel image
+-append cmdline use 'cmdline' as kernel command line
+-initrd file use 'file' as initial ram disk
+-dtb file use 'file' as device tree image
+
+Debug/Expert options:
+-serial dev redirect the serial port to char device 'dev'
+-parallel dev redirect the parallel port to char device 'dev'
+-monitor dev redirect the monitor to char device 'dev'
+-qmp dev like -monitor but opens in 'control' mode
+-mon chardev=[name][,mode=readline|control][,default]
+-debugcon dev redirect the debug console to char device 'dev'
+-pidfile file write PID to 'file'
+-singlestep always run in singlestep mode
+-S freeze CPU at startup (use 'c' to start execution)
+-gdb dev wait for gdb connection on 'dev'
+-s shorthand for -gdb tcp::1234
+-d item1,... output log to /tmp/qemu.log (use -d ? for a list of log items)
+-D logfile output log to logfile (instead of the default /tmp/qemu.log)
+-hdachs c,h,s[,t]
+ force hard disk 0 physical geometry and the optional BIOS
+ translation (t=none or lba) (usually QEMU can guess them)
+-L path set the directory for the BIOS, VGA BIOS and keymaps
+-bios file set the filename for the BIOS
+-enable-kvm enable KVM full virtualization support
+-xen-domid id specify xen guest domain id
+-xen-create create domain using xen hypercalls, bypassing xend
+ warning: should not be used when xend is in use
+-xen-attach attach to existing xen domain
+ xend will use this when starting QEMU
+-no-reboot exit instead of rebooting
+-no-shutdown stop before shutdown
+-loadvm [tag|id]
+ start right away with a saved state (loadvm in monitor)
+-daemonize daemonize QEMU after initializing
+-option-rom rom load a file, rom, into the option ROM space
+-clock force the use of the given methods for timer alarm.
+ To see what timers are available use -clock ?
+-rtc [base=utc|localtime|date][,clock=host|rt|vm][,driftfix=none|slew]
+ set the RTC base and clock, enable drift fix for clock ticks (x86 only)
+-icount [N|auto]
+ enable virtual instruction counter with 2^N clock ticks per
+ instruction
+-watchdog i6300esb|ib700
+ enable virtual hardware watchdog [default=none]
+-watchdog-action reset|shutdown|poweroff|pause|debug|none
+ action when watchdog fires [default=reset]
+-echr chr set terminal escape character instead of ctrl-a
+-virtioconsole c
+ set virtio console
+-show-cursor show cursor
+-tb-size n set TB size
+-incoming p prepare for incoming migration, listen on port p
+-nodefaults don't create default devices
+-chroot dir chroot to dir just before starting the VM
+-runas user change to user id user just before starting the VM
+-readconfig <file>
+-writeconfig <file>
+ read/write config file
+-nodefconfig
+ do not load default config files at startup
+-no-user-config
+ do not load user-provided config files at startup
+-trace [events=<file>][,file=<file>]
+ specify tracing options
+-qtest CHR specify tracing options
+-qtest-log LOG specify tracing options
+
+During emulation, the following keys are useful:
+ctrl-alt-f toggle full screen
+ctrl-alt-n switch to virtual console 'n'
+ctrl-alt toggle mouse and keyboard grab
+
+When using -nographic, press 'ctrl-a h' to get some help.
diff --git a/tests/qemuhelpdata/qemu-1.1-device b/tests/qemuhelpdata/qemu-1.1-device
new file mode 100644
index 0000000..64aacba
--- /dev/null
+++ b/tests/qemuhelpdata/qemu-1.1-device
@@ -0,0 +1,160 @@
+name "usb-storage", bus USB
+name "VGA", bus PCI
+name "scsi-hd", bus SCSI, desc "virtual SCSI disk"
+name "i82559a", bus PCI, desc "Intel i82559A Ethernet"
+name "i82559b", bus PCI, desc "Intel i82559B Ethernet"
+name "i82559c", bus PCI, desc "Intel i82559C Ethernet"
+name "sysbus-ohci", bus System, desc "OHCI USB Controller"
+name "virtio-blk-pci", bus PCI, alias "virtio-blk"
+name "qxl-vga", bus PCI, desc "Spice QXL GPU (primary, vga
compatible)"
+name "x3130-upstream", bus PCI, desc "TI X3130 Upstream Port of PCI
Express Switch"
+name "ide-drive", bus IDE, desc "virtual IDE disk or CD-ROM
(legacy)"
+name "virtio-9p-pci", bus PCI
+name "cirrus-vga", bus PCI, desc "Cirrus CLGD 54xx VGA"
+name "ide-hd", bus IDE, desc "virtual IDE disk"
+name "ES1370", bus PCI, desc "ENSONIQ AudioPCI ES1370"
+name "ioh3420", bus PCI, desc "Intel IOH device id 3420 PCIE Root
Port"
+name "sga", bus ISA, desc "Serial Graphics Adapter"
+name "scsi-block", bus SCSI, desc "SCSI block device passthrough"
+name "usb-serial", bus USB
+name "pc-sysfw", bus System, desc "PC System Firmware"
+name "usb-mouse", bus USB
+name "usb-net", bus USB
+name "usb-hub", bus USB
+name "ccid-card-emulated", bus ccid-bus, desc "emulated smartcard"
+name "ne2k_isa", bus ISA
+name "scsi-generic", bus SCSI, desc "pass through generic scsi device
(/dev/sg*)"
+name "pcnet", bus PCI
+name "lsi53c895a", bus PCI, alias "lsi"
+name "scsi-disk", bus SCSI, desc "virtual SCSI disk or CD-ROM
(legacy)"
+name "nec-usb-xhci", bus PCI
+name "xio3130-downstream", bus PCI, desc "TI X3130 Downstream Port of PCI
Express Switch"
+name "pci-ohci", bus PCI, desc "Apple USB Controller"
+name "virtserialport", bus virtio-serial-bus
+name "hda-micro", bus HDA, desc "HDA Audio Codec, duplex (speaker,
microphone)"
+name "usb-braille", bus USB
+name "scsi-cd", bus SCSI, desc "virtual SCSI CD-ROM"
+name "usb-wacom-tablet", bus USB, desc "QEMU PenPartner Tablet"
+name "isa-serial", bus ISA
+name "i82550", bus PCI, desc "Intel i82550 Ethernet"
+name "i82551", bus PCI, desc "Intel i82551 Ethernet"
+name "isa-debugcon", bus ISA
+name "ide-cd", bus IDE, desc "virtual IDE CD-ROM"
+name "SUNW,fdtwo", bus System
+name "ich9-usb-uhci1", bus PCI
+name "ich9-usb-uhci2", bus PCI
+name "ich9-usb-uhci3", bus PCI
+name "isa-parallel", bus ISA
+name "virtconsole", bus virtio-serial-bus
+name "ne2k_pci", bus PCI
+name "virtio-serial-pci", bus PCI, alias "virtio-serial"
+name "hda-duplex", bus HDA, desc "HDA Audio Codec, duplex (line-out,
line-in)"
+name "intel-hda", bus PCI, desc "Intel HD Audio Controller"
+name "i82559er", bus PCI, desc "Intel i82559ER Ethernet"
+name "hda-output", bus HDA, desc "HDA Audio Codec, output-only
(line-out)"
+name "i82562", bus PCI, desc "Intel i82562 Ethernet"
+name "sysbus-ahci", bus System
+name "usb-ccid", bus USB, desc "CCID Rev 1.1 smartcard reader"
+name "ivshmem", bus PCI
+name "AC97", bus PCI, desc "Intel 82801AA AC97 Audio"
+name "e1000", bus PCI, desc "Intel Gigabit Ethernet"
+name "sysbus-fdc", bus System
+name "usb-bt-dongle", bus USB
+name "usb-tablet", bus USB
+name "isa-vga", bus ISA
+name "usb-kbd", bus USB
+name "isa-applesmc", bus ISA
+name "ib700", bus ISA
+name "rtl8139", bus PCI
+name "qxl", bus PCI, desc "Spice QXL GPU (secondary)"
+name "i82557a", bus PCI, desc "Intel i82557A Ethernet"
+name "i82557b", bus PCI, desc "Intel i82557B Ethernet"
+name "i82557c", bus PCI, desc "Intel i82557C Ethernet"
+name "usb-audio", bus USB
+name "piix3-usb-uhci", bus PCI
+name "piix4-usb-uhci", bus PCI
+name "ccid-card-passthru", bus ccid-bus, desc "passthrough
smartcard"
+name "i82801", bus PCI, desc "Intel i82801 Ethernet"
+name "smbus-eeprom", bus I2C
+name "vmware-svga", bus PCI
+name "isa-cirrus-vga", bus ISA
+name "sb16", bus ISA, desc "Creative Sound Blaster 16"
+name "pci-bridge", bus PCI, desc "Standard PCI Bridge"
+name "usb-ehci", bus PCI
+name "vt82c686b-usb-uhci", bus PCI
+name "i82558a", bus PCI, desc "Intel i82558A Ethernet"
+name "virtio-net-pci", bus PCI, alias "virtio-net"
+name "virtio-balloon-pci", bus PCI, alias "virtio-balloon"
+name "ich9-usb-ehci1", bus PCI
+name "isa-ide", bus ISA
+name "usb-host", bus USB
+name "ich9-ahci", bus PCI, alias "ahci"
+name "i6300esb", bus PCI
+name "i82558b", bus PCI, desc "Intel i82558B Ethernet"
+name "virtio-scsi-pci", bus PCI
+virtio-blk-pci.class=hex32
+virtio-blk-pci.drive=drive
+virtio-blk-pci.logical_block_size=blocksize
+virtio-blk-pci.physical_block_size=blocksize
+virtio-blk-pci.min_io_size=uint16
+virtio-blk-pci.opt_io_size=uint32
+virtio-blk-pci.bootindex=int32
+virtio-blk-pci.discard_granularity=uint32
+virtio-blk-pci.serial=string
+virtio-blk-pci.ioeventfd=on/off
+virtio-blk-pci.vectors=uint32
+virtio-blk-pci.indirect_desc=on/off
+virtio-blk-pci.event_idx=on/off
+virtio-blk-pci.scsi=on/off
+virtio-blk-pci.addr=pci-devfn
+virtio-blk-pci.romfile=string
+virtio-blk-pci.rombar=uint32
+virtio-blk-pci.multifunction=on/off
+virtio-blk-pci.command_serr_enable=on/off
+virtio-net-pci.ioeventfd=on/off
+virtio-net-pci.vectors=uint32
+virtio-net-pci.indirect_desc=on/off
+virtio-net-pci.event_idx=on/off
+virtio-net-pci.csum=on/off
+virtio-net-pci.guest_csum=on/off
+virtio-net-pci.gso=on/off
+virtio-net-pci.guest_tso4=on/off
+virtio-net-pci.guest_tso6=on/off
+virtio-net-pci.guest_ecn=on/off
+virtio-net-pci.guest_ufo=on/off
+virtio-net-pci.host_tso4=on/off
+virtio-net-pci.host_tso6=on/off
+virtio-net-pci.host_ecn=on/off
+virtio-net-pci.host_ufo=on/off
+virtio-net-pci.mrg_rxbuf=on/off
+virtio-net-pci.status=on/off
+virtio-net-pci.ctrl_vq=on/off
+virtio-net-pci.ctrl_rx=on/off
+virtio-net-pci.ctrl_vlan=on/off
+virtio-net-pci.ctrl_rx_extra=on/off
+virtio-net-pci.mac=macaddr
+virtio-net-pci.vlan=vlan
+virtio-net-pci.netdev=netdev
+virtio-net-pci.bootindex=int32
+virtio-net-pci.x-txtimer=uint32
+virtio-net-pci.x-txburst=int32
+virtio-net-pci.tx=string
+virtio-net-pci.addr=pci-devfn
+virtio-net-pci.romfile=string
+virtio-net-pci.rombar=uint32
+virtio-net-pci.multifunction=on/off
+virtio-net-pci.command_serr_enable=on/off
+scsi-disk.drive=drive
+scsi-disk.logical_block_size=blocksize
+scsi-disk.physical_block_size=blocksize
+scsi-disk.min_io_size=uint16
+scsi-disk.opt_io_size=uint32
+scsi-disk.bootindex=int32
+scsi-disk.discard_granularity=uint32
+scsi-disk.ver=string
+scsi-disk.serial=string
+scsi-disk.removable=on/off
+scsi-disk.dpofua=on/off
+scsi-disk.channel=uint32
+scsi-disk.scsi-id=uint32
+scsi-disk.lun=uint32
diff --git a/tests/qemuhelptest.c b/tests/qemuhelptest.c
index d23b35a..57d1859 100644
--- a/tests/qemuhelptest.c
+++ b/tests/qemuhelptest.c
@@ -678,6 +678,81 @@ mymain(void)
QEMU_CAPS_SCSI_BLOCK,
QEMU_CAPS_SCSI_CD,
QEMU_CAPS_IDE_CD);
+ DO_TEST("qemu-1.1", 1000092, 0, 0,
+ QEMU_CAPS_VNC_COLON,
+ QEMU_CAPS_NO_REBOOT,
+ QEMU_CAPS_DRIVE,
+ QEMU_CAPS_NAME,
+ QEMU_CAPS_UUID,
+ QEMU_CAPS_MIGRATE_QEMU_TCP,
+ QEMU_CAPS_MIGRATE_QEMU_EXEC,
+ QEMU_CAPS_DRIVE_CACHE_V2,
+ QEMU_CAPS_DRIVE_CACHE_UNSAFE,
+ QEMU_CAPS_DRIVE_FORMAT,
+ QEMU_CAPS_DRIVE_SERIAL,
+ QEMU_CAPS_XEN_DOMID,
+ QEMU_CAPS_DRIVE_READONLY,
+ QEMU_CAPS_VGA,
+ QEMU_CAPS_0_10,
+ QEMU_CAPS_MEM_PATH,
+ QEMU_CAPS_SDL,
+ QEMU_CAPS_MIGRATE_QEMU_UNIX,
+ QEMU_CAPS_CHARDEV,
+ QEMU_CAPS_ENABLE_KVM,
+ QEMU_CAPS_MONITOR_JSON,
+ QEMU_CAPS_BALLOON,
+ QEMU_CAPS_DEVICE,
+ QEMU_CAPS_SMP_TOPOLOGY,
+ QEMU_CAPS_NETDEV,
+ QEMU_CAPS_RTC,
+ QEMU_CAPS_VHOST_NET,
+ QEMU_CAPS_NO_HPET,
+ QEMU_CAPS_NODEFCONFIG,
+ QEMU_CAPS_BOOT_MENU,
+ QEMU_CAPS_FSDEV,
+ QEMU_CAPS_NAME_PROCESS,
+ QEMU_CAPS_SMBIOS_TYPE,
+ QEMU_CAPS_VGA_QXL,
+ QEMU_CAPS_SPICE,
+ QEMU_CAPS_VGA_NONE,
+ QEMU_CAPS_MIGRATE_QEMU_FD,
+ QEMU_CAPS_BOOTINDEX,
+ QEMU_CAPS_HDA_DUPLEX,
+ QEMU_CAPS_DRIVE_AIO,
+ QEMU_CAPS_CCID_EMULATED,
+ QEMU_CAPS_CCID_PASSTHRU,
+ QEMU_CAPS_CHARDEV_SPICEVMC,
+ QEMU_CAPS_VIRTIO_TX_ALG,
+ QEMU_CAPS_DEVICE_QXL_VGA,
+ QEMU_CAPS_PCI_MULTIFUNCTION,
+ QEMU_CAPS_VIRTIO_IOEVENTFD,
+ QEMU_CAPS_SGA,
+ QEMU_CAPS_VIRTIO_BLK_EVENT_IDX,
+ QEMU_CAPS_VIRTIO_NET_EVENT_IDX,
+ QEMU_CAPS_DRIVE_CACHE_DIRECTSYNC,
+ QEMU_CAPS_PIIX3_USB_UHCI,
+ QEMU_CAPS_PIIX4_USB_UHCI,
+ QEMU_CAPS_USB_EHCI,
+ QEMU_CAPS_ICH9_USB_EHCI1,
+ QEMU_CAPS_VT82C686B_USB_UHCI,
+ QEMU_CAPS_PCI_OHCI,
+ QEMU_CAPS_USB_HUB,
+ QEMU_CAPS_NO_SHUTDOWN,
+ QEMU_CAPS_PCI_ROMBAR,
+ QEMU_CAPS_ICH9_AHCI,
+ QEMU_CAPS_NO_ACPI,
+ QEMU_CAPS_FSDEV_READONLY,
+ QEMU_CAPS_VIRTIO_BLK_SCSI,
+ QEMU_CAPS_VIRTIO_BLK_SG_IO,
+ QEMU_CAPS_DRIVE_COPY_ON_READ,
+ QEMU_CAPS_CPU_HOST,
+ QEMU_CAPS_FSDEV_WRITEOUT,
+ QEMU_CAPS_DRIVE_IOTUNE,
+ QEMU_CAPS_SCSI_DISK_CHANNEL,
+ QEMU_CAPS_SCSI_BLOCK,
+ QEMU_CAPS_SCSI_CD,
+ QEMU_CAPS_IDE_CD,
+ QEMU_CAPS_NO_USER_CONFIG);
return ret == 0 ? EXIT_SUCCESS : EXIT_FAILURE;
}
--
1.8.4.rc3
8:21 a.m.
New subject: [libvirt] [v0.9.12-maint v3 08/12] storage: Need to also VIR_FREE(reg)
From: Luca Tettamanti <ltettamanti(a)acunu.com>
Commit-id 'afc4631b' added the regfree(reg) to free resources alloc'd
during regcomp; however, reg still needed to be VIR_FREE()'d. The call
to regfree() also didn't account for possible NULL value. Reformatted
the call to be closer to usage.
(cherry picked from commit 71da3b66a8455faf8019effe3cf504a31f91f54a)
Backported to 0.9.12 with afc4631b and its revert skipped.
Signed-off-by: Luca Tettamanti <ltettamanti acunu com>
---
src/storage/storage_backend_logical.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/src/storage/storage_backend_logical.c
b/src/storage/storage_backend_logical.c
index 9a91dd9..7abb17b 100644
--- a/src/storage/storage_backend_logical.c
+++ b/src/storage/storage_backend_logical.c
@@ -204,13 +204,16 @@ virStorageBackendLogicalMakeVol(virStoragePoolObjPtr pool,
if (err != 0) {
char error[100];
regerror(err, reg, error, sizeof(error));
+ regfree(reg);
virStorageReportError(VIR_ERR_INTERNAL_ERROR,
_("Failed to compile regex %s"),
error);
goto cleanup;
}
- if (regexec(reg, groups[3], nvars, vars, 0) != 0) {
+ err = regexec(reg, groups[3], nvars, vars, 0);
+ regfree(reg);
+ if (err != 0) {
virStorageReportError(VIR_ERR_INTERNAL_ERROR, "%s",
_("malformed volume extent devices value"));
goto cleanup;
--
1.8.4.rc3
8:21 a.m.
New subject: [libvirt] [v0.9.12-maint v3 09/12] conf: Remove callback from stream when freeing entries in console hash
From: Peter Krempa <pkrempa(a)redhat.com>
When a domain has a active console connection and is destroyed the
callback is called on private data that no longer exist causing a
segfault.
(cherry picked from commit ba226d334acbc49f6751b430e0c4e00f69eef6bf)
---
src/conf/virconsole.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/src/conf/virconsole.c b/src/conf/virconsole.c
index 443d80d..e665149 100644
--- a/src/conf/virconsole.c
+++ b/src/conf/virconsole.c
@@ -222,6 +222,9 @@ static void virConsoleHashEntryFree(void *data,
const char *pty = name;
virStreamPtr st = data;
+ /* remove callback from stream */
+ virFDStreamSetInternalCloseCb(st, NULL, NULL, NULL);
+
/* free stream reference */
virStreamFree(st);
--
1.8.4.rc3
8:22 a.m.
New subject: [libvirt] [v0.9.12-maint v3 10/12] conf: Remove console stream callback only when freeing console helper
From: Peter Krempa <pkrempa(a)redhat.com>
Commit ba226d334acbc49f6751b430e0c4e00f69eef6bf tried to fix crash of
the daemon when a domain with an open console was destroyed. The fix was
wrong as it tried to remove the callback also when the stream was
aborted, where at that point the fd stream driver was already freed and
removed.
This patch clears the callbacks with a helper right before the hash is
freed, so that it doesn't interfere with other codepaths where the
stream object is freed.
(cherry picked from commit 45edefc7a7bcbec988f54331ff37fc32e4bc2718)
---
src/conf/virconsole.c | 16 +++++++++++++---
1 file changed, 13 insertions(+), 3 deletions(-)
diff --git a/src/conf/virconsole.c b/src/conf/virconsole.c
index e665149..01f1c84 100644
--- a/src/conf/virconsole.c
+++ b/src/conf/virconsole.c
@@ -222,9 +222,6 @@ static void virConsoleHashEntryFree(void *data,
const char *pty = name;
virStreamPtr st = data;
- /* remove callback from stream */
- virFDStreamSetInternalCloseCb(st, NULL, NULL, NULL);
-
/* free stream reference */
virStreamFree(st);
@@ -293,6 +290,18 @@ error:
}
/**
+ * Helper to clear stream callbacks when freeing the hash
+ */
+static void virConsoleFreeClearCallbacks(void *payload,
+ const void *name ATTRIBUTE_UNUSED,
+ void *data ATTRIBUTE_UNUSED)
+{
+ virStreamPtr st = payload;
+
+ virFDStreamSetInternalCloseCb(st, NULL, NULL, NULL);
+}
+
+/**
* Free structures for handling open console streams.
*
* @cons Pointer to the private structure.
@@ -303,6 +312,7 @@ void virConsoleFree(virConsolesPtr cons)
return;
virMutexLock(&cons->lock);
+ virHashForEach(cons->hash, virConsoleFreeClearCallbacks, NULL);
virHashFree(cons->hash);
virMutexUnlock(&cons->lock);
virMutexDestroy(&cons->lock);
--
1.8.4.rc3
8:22 a.m.
New subject: [libvirt] [v0.9.12-maint v3 11/12] Don't ignore return value of qemuProcessKill
From: "Daniel P. Berrange" <berrange(a)redhat.com>
When calling qemuProcessKill from the virDomainDestroy impl
in QEMU, do not ignore the return value. This ensures that
if QEMU fails to respond to SIGKILL, the caller will know
about the failure.
Signed-off-by: Daniel P. Berrange <berrange(a)redhat.com>
(cherry picked from commit f1b4021b38f9485c50d386af6f682ecfc8025af5)
---
src/qemu/qemu_driver.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/src/qemu/qemu_driver.c b/src/qemu/qemu_driver.c
index 0053ed1..eefdf75 100644
--- a/src/qemu/qemu_driver.c
+++ b/src/qemu/qemu_driver.c
@@ -1839,7 +1839,11 @@ qemuDomainDestroyFlags(virDomainPtr dom,
goto cleanup;
}
} else {
- ignore_value(qemuProcessKill(driver, vm, VIR_QEMU_PROCESS_KILL_FORCE));
+ if (qemuProcessKill(driver, vm, VIR_QEMU_PROCESS_KILL_FORCE) < 0) {
+ qemuReportError(VIR_ERR_OPERATION_FAILED, "%s",
+ _("failed to kill qemu process with SIGTERM"));
+ goto cleanup;
+ }
}
/* We need to prevent monitor EOF callback from doing our work (and sending
--
1.8.4.rc3
8:22 a.m.
New subject: [libvirt] [v0.9.12-maint v3 12/12] Fix race condition when destroying guests
From: "Daniel P. Berrange" <berrange(a)redhat.com>
When running virDomainDestroy, we need to make sure that no other
background thread cleans up the domain while we're doing our work.
This can happen if we release the domain object while in the
middle of work, because the monitor might detect EOF in this window.
For this reason we have a 'beingDestroyed' flag to stop the monitor
from doing its normal cleanup. Unfortunately this flag was only
being used to protect qemuDomainBeginJob, and not qemuProcessKill
This left open a race condition where either libvirtd could crash,
or alternatively report bogus error messages about the domain already
having been destroyed to the caller
Signed-off-by: Daniel P. Berrange <berrange(a)redhat.com>
(cherry picked from commit 81621f3e6e45e8681cc18ae49404736a0e772a11)
Conflicts:
src/qemu/qemu_driver.c
---
src/qemu/qemu_driver.c | 13 ++++++++-----
1 file changed, 8 insertions(+), 5 deletions(-)
diff --git a/src/qemu/qemu_driver.c b/src/qemu/qemu_driver.c
index eefdf75..c0b4707 100644
--- a/src/qemu/qemu_driver.c
+++ b/src/qemu/qemu_driver.c
@@ -1827,6 +1827,12 @@ qemuDomainDestroyFlags(virDomainPtr dom,
qemuDomainSetFakeReboot(driver, vm, false);
+
+ /* We need to prevent monitor EOF callback from doing our work (and sending
+ * misleading events) while the vm is unlocked inside BeginJob/ProcessKill API
+ */
+ priv->beingDestroyed = true;
+
/* Although qemuProcessStop does this already, there may
* be an outstanding job active. We want to make sure we
* can kill the process even if a job is active. Killing
@@ -1834,23 +1840,20 @@ qemuDomainDestroyFlags(virDomainPtr dom,
*/
if (flags & VIR_DOMAIN_DESTROY_GRACEFUL) {
if (qemuProcessKill(driver, vm, 0) < 0) {
+ priv->beingDestroyed = false;
qemuReportError(VIR_ERR_OPERATION_FAILED, "%s",
_("failed to kill qemu process with SIGTERM"));
goto cleanup;
}
} else {
if (qemuProcessKill(driver, vm, VIR_QEMU_PROCESS_KILL_FORCE) < 0) {
+ priv->beingDestroyed = false;
qemuReportError(VIR_ERR_OPERATION_FAILED, "%s",
_("failed to kill qemu process with SIGTERM"));
goto cleanup;
}
}
- /* We need to prevent monitor EOF callback from doing our work (and sending
- * misleading events) while the vm is unlocked inside BeginJob API
- */
- priv->beingDestroyed = true;
-
if (qemuDomainObjBeginJobWithDriver(driver, vm, QEMU_JOB_DESTROY) < 0)
goto cleanup;
--
1.8.4.rc3
8:59 a.m.
On 09/13/2013 07:21 AM, Guido Günther wrote:
These are the patches Debian is currently carrying on 0.9.12. Most
are
straight cherry-picks. Since we're maintaining 0.9.12 for our current
stable release I'm happy to push these to v0.9.12-maint.
The only change over v2 is the adjuste commit message.
ACK.
--
Eric Blake eblake redhat com +1-919-301-3266
Libvirt virtualization library http://libvirt.org
9:10 a.m.
On Fri, Sep 13, 2013 at 07:59:04AM -0600, Eric Blake wrote:
On 09/13/2013 07:21 AM, Guido Günther wrote:
> These are the patches Debian is currently carrying on 0.9.12. Most are
> straight cherry-picks. Since we're maintaining 0.9.12 for our current
> stable release I'm happy to push these to v0.9.12-maint.
>
> The only change over v2 is the adjuste commit message.
ACK.
Pushed. Thanks.
-- Guido
--
Eric Blake eblake redhat com +1-919-301-3266
Libvirt virtualization library http://libvirt.org
4090
days inactive
4090
days old
14 comments
2 participants
participants (2)
-
Eric Blake -
Guido Günther