[libvirt] [PATCHv6 0/5]Write separate module for hostdev passthrough

These patches implements a separate module for hostdev passthrough so that it could be shared by different drivers and can maintain a global state of a host device. Plus, add passthrough to libxl driver, and change qemu driver and lxc driver to use hostdev common library instead of their own hostdev APIs. --- Changes to v5: * For upgrade concern, check netconfig file in old stateDir xxx/qemu/ if it's not found in new location xxx/hostdevmgr/, since if there is existing VM, then after upgrade, NetConfigRestore should find the netconfig file from old stateDir place. * Rebase to new qemu_hostdev changes, e.g, prefer VFIO, and add CheckSupport. * Put into separate patches for adding a pci backend type for xen and other hostdev common library stuff * Other fixes according to Daniel's comments. v5 is here: http://www.redhat.com/archives/libvir-list/2013-September/msg00745.html Chunyan Liu (5): Add a hostdev PCI backend type Add hostdev passthrough common library Add pci passthrough to libxl driver Change qemu driver to use hostdev common library Change lxc driver to use hostdev common library docs/schemas/domaincommon.rng | 1 + po/POTFILES.in | 3 +- src/Makefile.am | 3 +- src/conf/domain_conf.c | 3 +- src/conf/domain_conf.h | 1 + src/libvirt_private.syms | 20 + src/libxl/libxl_conf.c | 63 ++ src/libxl/libxl_conf.h | 4 + src/libxl/libxl_domain.c | 9 + src/libxl/libxl_driver.c | 448 +++++++++++- src/lxc/lxc_conf.h | 4 - src/lxc/lxc_driver.c | 47 +- src/lxc/lxc_hostdev.c | 413 ---------- src/lxc/lxc_hostdev.h | 43 -- src/lxc/lxc_process.c | 24 +- src/qemu/qemu_command.c | 4 +- src/qemu/qemu_conf.h | 9 +- src/qemu/qemu_domain.c | 22 + src/qemu/qemu_driver.c | 77 +-- src/qemu/qemu_hostdev.c | 1453 ----------------------------------- src/qemu/qemu_hostdev.h | 74 -- src/qemu/qemu_hotplug.c | 133 ++-- src/qemu/qemu_process.c | 40 +- src/util/virhostdev.c | 1671 +++++++++++++++++++++++++++++++++++++++++ src/util/virhostdev.h | 129 ++++ src/util/virpci.c | 30 +- src/util/virpci.h | 9 +- src/util/virscsi.c | 28 +- src/util/virscsi.h | 8 +- src/util/virusb.c | 29 +- src/util/virusb.h | 8 +- 31 files changed, 2607 insertions(+), 2203 deletions(-) delete mode 100644 src/lxc/lxc_hostdev.c delete mode 100644 src/lxc/lxc_hostdev.h delete mode 100644 src/qemu/qemu_hostdev.c delete mode 100644 src/qemu/qemu_hostdev.h create mode 100644 src/util/virhostdev.c create mode 100644 src/util/virhostdev.h

Add VIR_DOMAIN_HOSTDEV_PCI_BACKEND_XEN. For legacy xen, it will use "pciback" as stub driver. Signed-off-by: Chunyan Liu <cyliu@suse.com> --- docs/schemas/domaincommon.rng | 1 + src/conf/domain_conf.c | 3 ++- src/conf/domain_conf.h | 1 + src/libxl/libxl_domain.c | 9 +++++++++ src/qemu/qemu_command.c | 3 +-- src/qemu/qemu_hotplug.c | 4 +--- 6 files changed, 15 insertions(+), 6 deletions(-) diff --git a/docs/schemas/domaincommon.rng b/docs/schemas/domaincommon.rng index 14b6700..c096c09 100644 --- a/docs/schemas/domaincommon.rng +++ b/docs/schemas/domaincommon.rng @@ -3318,6 +3318,7 @@ <choice> <value>kvm</value> <value>vfio</value> + <value>xen</value> </choice> </attribute> <empty/> diff --git a/src/conf/domain_conf.c b/src/conf/domain_conf.c index 51c4e29..3c87464 100644 --- a/src/conf/domain_conf.c +++ b/src/conf/domain_conf.c @@ -615,7 +615,8 @@ VIR_ENUM_IMPL(virDomainHostdevSubsysPciBackend, VIR_DOMAIN_HOSTDEV_PCI_BACKEND_TYPE_LAST, "default", "kvm", - "vfio") + "vfio", + "xen") VIR_ENUM_IMPL(virDomainHostdevCaps, VIR_DOMAIN_HOSTDEV_CAPS_TYPE_LAST, "storage", diff --git a/src/conf/domain_conf.h b/src/conf/domain_conf.h index 4520ae4..471c645 100644 --- a/src/conf/domain_conf.h +++ b/src/conf/domain_conf.h @@ -402,6 +402,7 @@ typedef enum { VIR_DOMAIN_HOSTDEV_PCI_BACKEND_DEFAULT, /* detect automaticaly, prefer VFIO */ VIR_DOMAIN_HOSTDEV_PCI_BACKEND_KVM, /* force legacy kvm style */ VIR_DOMAIN_HOSTDEV_PCI_BACKEND_VFIO, /* force vfio */ + VIR_DOMAIN_HOSTDEV_PCI_BACKEND_XEN, /* force legacy xen style, use pciback */ VIR_DOMAIN_HOSTDEV_PCI_BACKEND_TYPE_LAST } virDomainHostdevSubsysPciBackendType; diff --git a/src/libxl/libxl_domain.c b/src/libxl/libxl_domain.c index 68009db..32e798b 100644 --- a/src/libxl/libxl_domain.c +++ b/src/libxl/libxl_domain.c @@ -393,6 +393,15 @@ libxlDomainDeviceDefPostParse(virDomainDeviceDefPtr dev, STRNEQ(def->os.type, "hvm")) dev->data.chr->targetType = VIR_DOMAIN_CHR_CONSOLE_TARGET_TYPE_XEN; + if (dev->type == VIR_DOMAIN_DEVICE_HOSTDEV) { + virDomainHostdevDefPtr hostdev = dev->data.hostdev; + + if (hostdev->mode == VIR_DOMAIN_HOSTDEV_MODE_SUBSYS && + hostdev->source.subsys.type == VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_PCI && + hostdev->source.subsys.u.pci.backend == VIR_DOMAIN_HOSTDEV_PCI_BACKEND_DEFAULT) + hostdev->source.subsys.u.pci.backend = VIR_DOMAIN_HOSTDEV_PCI_BACKEND_XEN; + } + return 0; } diff --git a/src/qemu/qemu_command.c b/src/qemu/qemu_command.c index 63e235d..2e3c2df 100644 --- a/src/qemu/qemu_command.c +++ b/src/qemu/qemu_command.c @@ -5500,8 +5500,7 @@ qemuBuildPCIHostdevDevStr(virDomainDefPtr def, virBufferAddLit(&buf, "vfio-pci"); break; - case VIR_DOMAIN_HOSTDEV_PCI_BACKEND_DEFAULT: - case VIR_DOMAIN_HOSTDEV_PCI_BACKEND_TYPE_LAST: + default: virReportError(VIR_ERR_INTERNAL_ERROR, _("invalid PCI passthrough type '%s'"), virDomainHostdevSubsysPciBackendTypeToString(backend)); diff --git a/src/qemu/qemu_hotplug.c b/src/qemu/qemu_hotplug.c index e9424d9..a72e1f1 100644 --- a/src/qemu/qemu_hotplug.c +++ b/src/qemu/qemu_hotplug.c @@ -1164,9 +1164,7 @@ int qemuDomainAttachHostPciDevice(virQEMUDriverPtr driver, break; - case VIR_DOMAIN_HOSTDEV_PCI_BACKEND_DEFAULT: - case VIR_DOMAIN_HOSTDEV_PCI_BACKEND_KVM: - case VIR_DOMAIN_HOSTDEV_PCI_BACKEND_TYPE_LAST: + default: break; } -- 1.6.0.2

Add hostdev passthrough common library so that it could be shared by all drivers and maintain a global hostdev state. Signed-off-by: Chunyan Liu <cyliu@suse.com> --- po/POTFILES.in | 1 + src/Makefile.am | 1 + src/libvirt_private.syms | 20 + src/qemu/qemu_domain.c | 22 + src/qemu/qemu_hotplug.c | 2 - src/util/virhostdev.c | 1671 ++++++++++++++++++++++++++++++++++++++++++++++ src/util/virhostdev.h | 129 ++++ src/util/virpci.c | 30 +- src/util/virpci.h | 9 +- src/util/virscsi.c | 28 +- src/util/virscsi.h | 8 +- src/util/virusb.c | 29 +- src/util/virusb.h | 8 +- 13 files changed, 1928 insertions(+), 30 deletions(-) create mode 100644 src/util/virhostdev.c create mode 100644 src/util/virhostdev.h diff --git a/po/POTFILES.in b/po/POTFILES.in index 15afdec..384204b 100644 --- a/po/POTFILES.in +++ b/po/POTFILES.in @@ -159,6 +159,7 @@ src/util/vireventpoll.c src/util/virfile.c src/util/virhash.c src/util/virhook.c +src/util/virhostdev.c src/util/viridentity.c src/util/virinitctl.c src/util/viriptables.c diff --git a/src/Makefile.am b/src/Makefile.am index 21b9caf..c2dc46f 100644 --- a/src/Makefile.am +++ b/src/Makefile.am @@ -152,6 +152,7 @@ UTIL_SOURCES = \ util/virutil.c util/virutil.h \ util/viruuid.c util/viruuid.h \ util/virxml.c util/virxml.h \ + util/virhostdev.c util/virhostdev.h \ $(NULL) diff --git a/src/libvirt_private.syms b/src/libvirt_private.syms index 675835f..dee4135 100644 --- a/src/libvirt_private.syms +++ b/src/libvirt_private.syms @@ -1243,6 +1243,26 @@ virHookInitialize; virHookPresent; +#util/virhostdev.h +virHostdevHostSupportsPassthroughVFIO; +virHostdevManagerGetDefault; +virHostdevPciNodeDeviceDetach; +virHostdevPciNodeDeviceReAttach; +virHostdevPciNodeDeviceReset; +virHostdevPrepareDomainHostdevs; +virHostdevPreparePciHostdevs; +virHostdevPrepareScsiHostdevs; +virHostdevPrepareUsbHostdevs; +virHostdevReAttachDomainHostdevs; +virHostdevReAttachPciHostdevs; +virHostdevReAttachScsiHostdevs; +virHostdevReAttachUsbHostdevs; +virHostdevUpdateActiveHostdevs; +virHostdevUpdateActivePciHostdevs; +virHostdevUpdateActiveScsiHostdevs; +virHostdevUpdateActiveUsbHostdevs; + + # util/viridentity.h virIdentityGetAttr; virIdentityGetCurrent; diff --git a/src/qemu/qemu_domain.c b/src/qemu/qemu_domain.c index 81d0ba9..52697a9 100644 --- a/src/qemu/qemu_domain.c +++ b/src/qemu/qemu_domain.c @@ -38,6 +38,7 @@ #include "virtime.h" #include "virstoragefile.h" #include "virstring.h" +#include "virhostdev.h" #include <sys/time.h> #include <fcntl.h> @@ -814,6 +815,7 @@ qemuDomainDeviceDefPostParse(virDomainDeviceDefPtr dev, int ret = -1; virQEMUDriverPtr driver = opaque; virQEMUDriverConfigPtr cfg = NULL; + virQEMUCapsPtr qemuCaps = NULL; if (dev->type == VIR_DOMAIN_DEVICE_NET && dev->data.net->type != VIR_DOMAIN_NET_TYPE_HOSTDEV && @@ -892,6 +894,26 @@ qemuDomainDeviceDefPostParse(virDomainDeviceDefPtr dev, dev->data.chr->source.data.nix.listen = true; } + if (dev->type == VIR_DOMAIN_DEVICE_HOSTDEV) { + virDomainHostdevDefPtr hostdev = dev->data.hostdev; + bool supportsPassthroughVFIO = virHostdevHostSupportsPassthroughVFIO(); + if (!(qemuCaps = virQEMUCapsCacheLookupCopy(driver->qemuCapsCache, + def->emulator))) + goto cleanup; + + if (hostdev->mode == VIR_DOMAIN_HOSTDEV_MODE_SUBSYS && + hostdev->source.subsys.type == VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_PCI && + hostdev->source.subsys.u.pci.backend == VIR_DOMAIN_HOSTDEV_PCI_BACKEND_DEFAULT) { + if (supportsPassthroughVFIO && + virQEMUCapsGet(qemuCaps, QEMU_CAPS_DEVICE_VFIO_PCI)) + hostdev->source.subsys.u.pci.backend = VIR_DOMAIN_HOSTDEV_PCI_BACKEND_VFIO; + else + hostdev->source.subsys.u.pci.backend = VIR_DOMAIN_HOSTDEV_PCI_BACKEND_KVM; + } + + virObjectUnref(qemuCaps); + } + ret = 0; cleanup: diff --git a/src/qemu/qemu_hotplug.c b/src/qemu/qemu_hotplug.c index a72e1f1..c6a3134 100644 --- a/src/qemu/qemu_hotplug.c +++ b/src/qemu/qemu_hotplug.c @@ -2547,8 +2547,6 @@ qemuDomainRemoveHostDevice(virQEMUDriverPtr driver, virDomainAuditHostdev(vm, hostdev, "detach", true); - qemuDomainHostdevNetConfigRestore(hostdev, cfg->stateDir); - switch ((enum virDomainHostdevSubsysType) hostdev->source.subsys.type) { case VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_PCI: qemuDomainRemovePCIHostDevice(driver, vm, hostdev); diff --git a/src/util/virhostdev.c b/src/util/virhostdev.c new file mode 100644 index 0000000..9147894 --- /dev/null +++ b/src/util/virhostdev.c @@ -0,0 +1,1671 @@ +/* virhostdev.c: hostdev management + * + * Copyright (C) 2013 SUSE LINUX Products GmbH, Nuernberg, Germany. + * Copyright (C) 2006-2007, 2009-2013 Red Hat, Inc. + * Copyright (C) 2006 Daniel P. Berrange + * + * This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public + * License as published by the Free Software Foundation; either + * version 2.1 of the License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this library. If not, see + * <http://www.gnu.org/licenses/>. + * + * Author: Chunyan Liu <cyliu@suse.com> + * Author: Daniel P. Berrange <berrange@redhat.com> + */ + +#include <config.h> + +#include <dirent.h> +#include <fcntl.h> +#include <sys/ioctl.h> +#include <sys/types.h> +#include <sys/stat.h> +#include <unistd.h> +#include <stdlib.h> +#include <stdio.h> + +#include "virhostdev.h" +#include "viralloc.h" +#include "virstring.h" +#include "virfile.h" +#include "virerror.h" +#include "virlog.h" +#include "virpci.h" +#include "virusb.h" +#include "virscsi.h" +#include "virnetdev.h" +#include "virutil.h" +#include "configmake.h" + +#define VIR_FROM_THIS VIR_FROM_NONE + +#define HOSTDEV_STATE_DIR LOCALSTATEDIR "/run/libvirt/hostdevmgr" + +/* for upgrade, may need to find netconfig file in old qemu state dir */ +#define QEMU_STATE_DIR LOCALSTATEDIR "/run/libvirt/qemu" + +struct _virHostdevManager{ + char *stateDir; + + virPCIDeviceListPtr activePciHostdevs; + virPCIDeviceListPtr inactivePciHostdevs; + virUSBDeviceListPtr activeUsbHostdevs; + virSCSIDeviceListPtr activeScsiHostdevs; +}; + +static virHostdevManagerPtr hostdevMgr; + +static void +virHostdevManagerCleanup(void) +{ + if (!hostdevMgr) + return; + + virObjectUnref(hostdevMgr->activePciHostdevs); + virObjectUnref(hostdevMgr->inactivePciHostdevs); + virObjectUnref(hostdevMgr->activeUsbHostdevs); + VIR_FREE(hostdevMgr->stateDir); + + VIR_FREE(hostdevMgr); +} + +static int +virHostdevOnceInit(void) +{ + if (VIR_ALLOC(hostdevMgr) < 0) + goto error; + + if ((hostdevMgr->activePciHostdevs = virPCIDeviceListNew()) == NULL) + goto error; + + if ((hostdevMgr->activeUsbHostdevs = virUSBDeviceListNew()) == NULL) + goto error; + + if ((hostdevMgr->inactivePciHostdevs = virPCIDeviceListNew()) == NULL) + goto error; + + if ((hostdevMgr->activeScsiHostdevs = virSCSIDeviceListNew()) == NULL) + goto error; + + if (VIR_STRDUP(hostdevMgr->stateDir, HOSTDEV_STATE_DIR) < 0) + goto error; + + if (virFileMakePath(hostdevMgr->stateDir) < 0) { + virReportError(VIR_ERR_OPERATION_FAILED, + _("Failed to create state dir '%s'"), + hostdevMgr->stateDir); + goto error; + } + + return 0; + +error: + virHostdevManagerCleanup(); + return -1; +} + +VIR_ONCE_GLOBAL_INIT(virHostdev) + +virHostdevManagerPtr +virHostdevManagerGetDefault(void) +{ + if (virHostdevInitialize() < 0) + return NULL; + return hostdevMgr; +} + +static int +virHostdevPciSysfsPath(virDomainHostdevDefPtr hostdev, char **sysfs_path) +{ + virPCIDeviceAddress config_address; + + config_address.domain = hostdev->source.subsys.u.pci.addr.domain; + config_address.bus = hostdev->source.subsys.u.pci.addr.bus; + config_address.slot = hostdev->source.subsys.u.pci.addr.slot; + config_address.function = hostdev->source.subsys.u.pci.addr.function; + + return virPCIDeviceAddressGetSysfsFile(&config_address, sysfs_path); +} + +static int +virHostdevIsVirtualFunction(virDomainHostdevDefPtr hostdev) +{ + char *sysfs_path = NULL; + int ret = -1; + + if (virHostdevPciSysfsPath(hostdev, &sysfs_path) < 0) + return ret; + + ret = virPCIIsVirtualFunction(sysfs_path); + + VIR_FREE(sysfs_path); + + return ret; +} + +static int +virHostdevNetDevice(virDomainHostdevDefPtr hostdev, + char **linkdev, + int *vf) +{ + int ret = -1; + char *sysfs_path = NULL; + + if (virHostdevPciSysfsPath(hostdev, &sysfs_path) < 0) + return ret; + + if (virPCIIsVirtualFunction(sysfs_path) == 1) { + if (virPCIGetVirtualFunctionInfo(sysfs_path, linkdev, vf) < 0) + goto cleanup; + } else { + if (virPCIGetNetName(sysfs_path, linkdev) < 0) + goto cleanup; + *vf = -1; + } + + ret = 0; + +cleanup: + VIR_FREE(sysfs_path); + + return ret; +} + +static int +virHostdevNetConfigVirtPortProfile(const char *linkdev, int vf, + virNetDevVPortProfilePtr virtPort, + const virMacAddr *macaddr, + const unsigned char *uuid, + int associate) +{ + int ret = -1; + + if (!virtPort) + return ret; + + switch (virtPort->virtPortType) { + case VIR_NETDEV_VPORT_PROFILE_NONE: + case VIR_NETDEV_VPORT_PROFILE_OPENVSWITCH: + case VIR_NETDEV_VPORT_PROFILE_8021QBG: + case VIR_NETDEV_VPORT_PROFILE_LAST: + virReportError(VIR_ERR_CONFIG_UNSUPPORTED, + _("virtualport type %s is " + "currently not supported on interfaces of type " + "hostdev"), + virNetDevVPortTypeToString(virtPort->virtPortType)); + break; + + case VIR_NETDEV_VPORT_PROFILE_8021QBH: + if (associate) + ret = virNetDevVPortProfileAssociate(NULL, virtPort, macaddr, + linkdev, vf, uuid, + VIR_NETDEV_VPORT_PROFILE_OP_CREATE, false); + else + ret = virNetDevVPortProfileDisassociate(NULL, virtPort, + macaddr, linkdev, vf, + VIR_NETDEV_VPORT_PROFILE_OP_DESTROY); + break; + } + + return ret; +} + +static int +virHostdevNetConfigReplace(virDomainHostdevDefPtr hostdev, + const unsigned char *uuid, + char *stateDir) +{ + char *linkdev = NULL; + virNetDevVlanPtr vlan; + virNetDevVPortProfilePtr virtPort; + int ret = -1; + int vf = -1; + int vlanid = -1; + int port_profile_associate = 1; + int isvf; + + isvf = virHostdevIsVirtualFunction(hostdev); + if (isvf <= 0) { + virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s", + _("Interface type hostdev is currently supported on " + "SR-IOV Virtual Functions only")); + return ret; + } + + if (virHostdevNetDevice(hostdev, &linkdev, &vf) < 0) + return ret; + + vlan = virDomainNetGetActualVlan(hostdev->parent.data.net); + virtPort = virDomainNetGetActualVirtPortProfile(hostdev->parent.data.net); + if (virtPort) { + if (vlan) { + virReportError(VIR_ERR_CONFIG_UNSUPPORTED, + _("direct setting of the vlan tag is not allowed " + "for hostdev devices using %s mode"), + virNetDevVPortTypeToString(virtPort->virtPortType)); + goto cleanup; + } + ret = virHostdevNetConfigVirtPortProfile(linkdev, vf, + virtPort, + &hostdev->parent.data.net->mac, + uuid, + port_profile_associate); + } else { + /* Set only mac and vlan */ + if (vlan) { + if (vlan->nTags != 1 || vlan->trunk) { + virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s", + _("vlan trunking is not supported " + "by SR-IOV network devices")); + goto cleanup; + } + if (vf == -1) { + virReportError(VIR_ERR_CONFIG_UNSUPPORTED, + _("vlan can only be set for SR-IOV VFs, but " + "%s is not a VF"), linkdev); + goto cleanup; + } + vlanid = vlan->tag[0]; + } else if (vf >= 0) { + vlanid = 0; /* assure any current vlan tag is reset */ + } + + ret = virNetDevReplaceNetConfig(linkdev, vf, + &hostdev->parent.data.net->mac, + vlanid, stateDir); + } +cleanup: + VIR_FREE(linkdev); + return ret; +} + +/* oldStateDir: + * For upgrade, if there is an existing VM on QEMU, the hostdev netconfig file + * is previously stored in /var/run/libvirt/qemu. With new version, it tries to + * find in hostdevManager->stateDir location but certainly it cannot find it. In + * this case, we should find in the old state dir. + */ +static int +virHostdevNetConfigRestore(virDomainHostdevDefPtr hostdev, + char *stateDir, + char *oldStateDir) +{ + char *linkdev = NULL; + virNetDevVPortProfilePtr virtPort; + int ret = -1; + int vf = -1; + int port_profile_associate = 0; + int isvf; + + /* This is only needed for PCI devices that have been defined + * using <interface type='hostdev'>. For all others, it is a NOP. + */ + if (hostdev->mode != VIR_DOMAIN_HOSTDEV_MODE_SUBSYS || + hostdev->source.subsys.type != VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_PCI || + hostdev->parent.type != VIR_DOMAIN_DEVICE_NET || + !hostdev->parent.data.net) + return 0; + + isvf = virHostdevIsVirtualFunction(hostdev); + if (isvf <= 0) { + virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s", + _("Interface type hostdev is currently supported on " + "SR-IOV Virtual Functions only")); + return ret; + } + + if (virHostdevNetDevice(hostdev, &linkdev, &vf) < 0) + return ret; + + virtPort = virDomainNetGetActualVirtPortProfile(hostdev->parent.data.net); + if (virtPort) + ret = virHostdevNetConfigVirtPortProfile(linkdev, vf, virtPort, + &hostdev->parent.data.net->mac, + NULL, port_profile_associate); + else { + ret = virNetDevRestoreNetConfig(linkdev, vf, stateDir); + if (ret < 0 && oldStateDir != NULL) + ret = virNetDevRestoreNetConfig(linkdev, vf, oldStateDir); + } + + VIR_FREE(linkdev); + + return ret; +} + +static virPCIDeviceListPtr +virHostdevGetPciHostDeviceList(virDomainHostdevDefPtr *hostdevs, int nhostdevs) +{ + virPCIDeviceListPtr list; + size_t i; + + if (!(list = virPCIDeviceListNew())) + return NULL; + + for (i = 0; i < nhostdevs; i++) { + virDomainHostdevDefPtr hostdev = hostdevs[i]; + virPCIDevicePtr dev; + + if (hostdev->mode != VIR_DOMAIN_HOSTDEV_MODE_SUBSYS) + continue; + if (hostdev->source.subsys.type != VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_PCI) + continue; + + dev = virPCIDeviceNew(hostdev->source.subsys.u.pci.addr.domain, + hostdev->source.subsys.u.pci.addr.bus, + hostdev->source.subsys.u.pci.addr.slot, + hostdev->source.subsys.u.pci.addr.function); + if (!dev) { + virObjectUnref(list); + return NULL; + } + + if (virPCIDeviceListAdd(list, dev) < 0) { + virPCIDeviceFree(dev); + virObjectUnref(list); + return NULL; + } + + virPCIDeviceSetManaged(dev, hostdev->managed); + + switch (hostdev->source.subsys.u.pci.backend) { + case VIR_DOMAIN_HOSTDEV_PCI_BACKEND_VFIO: + if (virPCIDeviceSetStubDriver(dev, "vfio-pci") < 0) { + virObjectUnref(list); + return NULL; + } + break; + + case VIR_DOMAIN_HOSTDEV_PCI_BACKEND_XEN : + if (virPCIDeviceSetStubDriver(dev, "pciback") < 0) { + virObjectUnref(list); + return NULL; + } + break; + + case VIR_DOMAIN_HOSTDEV_PCI_BACKEND_KVM : + case VIR_DOMAIN_HOSTDEV_PCI_BACKEND_DEFAULT: + if (virPCIDeviceSetStubDriver(dev, "pci-stub") < 0) { + virObjectUnref(list); + return NULL; + } + break; + } + } + + return list; +} + +bool +virHostdevHostSupportsPassthroughVFIO(void) +{ + DIR *iommuDir = NULL; + struct dirent *iommuGroup = NULL; + bool ret = false; + + /* condition 1 - /sys/kernel/iommu_groups/ contains entries */ + if (!(iommuDir = opendir("/sys/kernel/iommu_groups/"))) + goto cleanup; + + while ((iommuGroup = readdir(iommuDir))) { + /* skip ./ ../ */ + if (STRPREFIX(iommuGroup->d_name, ".")) + continue; + + /* assume we found a group */ + break; + } + + if (!iommuGroup) + goto cleanup; + /* okay, iommu is on and recognizes groups */ + + /* condition 2 - /dev/vfio/vfio exists */ + if (!virFileExists("/dev/vfio/vfio")) + goto cleanup; + + ret = true; + +cleanup: + if (iommuDir) + closedir(iommuDir); + + return ret; +} + + +#if HAVE_LINUX_KVM_H +# include <linux/kvm.h> +static bool +virHostdevHostSupportsPassthroughKVM(void) +{ + int kvmfd = -1; + bool ret = false; + + if ((kvmfd = open("/dev/kvm", O_RDONLY)) < 0) + goto cleanup; + +# ifdef KVM_CAP_IOMMU + if ((ioctl(kvmfd, KVM_CHECK_EXTENSION, KVM_CAP_IOMMU)) <= 0) + goto cleanup; + + ret = true; +# endif + +cleanup: + VIR_FORCE_CLOSE(kvmfd); + + return ret; +} +#else +static bool +virHostdevHostSupportsPassthroughKVM(void) +{ + return false; +} +#endif + +static bool +virHostdevPCICheckSupport(virDomainHostdevDefPtr *hostdevs, + size_t nhostdevs) +{ + bool supportsPassthroughVFIO = virHostdevHostSupportsPassthroughVFIO(); + bool supportsPassthroughKVM = virHostdevHostSupportsPassthroughKVM(); + size_t i; + + /* assign defaults for hostdev passthrough */ + for (i = 0; i < nhostdevs; i++) { + virDomainHostdevDefPtr hostdev = hostdevs[i]; + int *backend = &hostdev->source.subsys.u.pci.backend; + + if (hostdev->mode != VIR_DOMAIN_HOSTDEV_MODE_SUBSYS) + continue; + if (hostdev->source.subsys.type != VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_PCI) + continue; + + switch ((virDomainHostdevSubsysPciBackendType) *backend) { + case VIR_DOMAIN_HOSTDEV_PCI_BACKEND_VFIO: + if (!supportsPassthroughVFIO) { + virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s", + _("host doesn't support VFIO PCI passthrough")); + return false; + } + break; + + case VIR_DOMAIN_HOSTDEV_PCI_BACKEND_DEFAULT: + case VIR_DOMAIN_HOSTDEV_PCI_BACKEND_KVM: + if (!supportsPassthroughKVM) { + virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s", + _("host doesn't support legacy PCI passthrough")); + return false; + } + + break; + + default: + break; + } + } + + return true; +} +int +virHostdevPreparePciHostdevs(virHostdevManagerPtr mgr, + const char *drv_name, + const char *dom_name, + const unsigned char *uuid, + virDomainHostdevDefPtr *hostdevs, + int nhostdevs, + unsigned int flags) +{ + virPCIDeviceListPtr pcidevs = NULL; + int last_processed_hostdev_vf = -1; + size_t i; + int ret = -1; + + virObjectLock(mgr->activePciHostdevs); + virObjectLock(mgr->inactivePciHostdevs); + + if (!virHostdevPCICheckSupport(hostdevs, nhostdevs)) + goto cleanup; + + if (!(pcidevs = virHostdevGetPciHostDeviceList(hostdevs, nhostdevs))) + goto cleanup; + + /* We have to use 9 loops here. *All* devices must + * be detached before we reset any of them, because + * in some cases you have to reset the whole PCI, + * which impacts all devices on it. Also, all devices + * must be reset before being marked as active. + */ + + /* Loop 1: validate that non-managed device isn't in use, eg + * by checking that device is either un-bound, or bound + * to stub driver + */ + + for (i = 0; i < virPCIDeviceListCount(pcidevs); i++) { + virPCIDevicePtr dev = virPCIDeviceListGet(pcidevs, i); + virPCIDevicePtr other; + bool strict_acs_check = (flags & VIR_STRICT_ACS_CHECK)?true:false; + + if (!virPCIDeviceIsAssignable(dev, strict_acs_check)) { + virReportError(VIR_ERR_OPERATION_INVALID, + _("PCI device %s is not assignable"), + virPCIDeviceGetName(dev)); + goto cleanup; + } + /* The device is in use by other active domain if + * the dev is in list activePciHostdevs. + */ + if ((other = virPCIDeviceListFind(mgr->activePciHostdevs, dev))) { + const char *other_drvname; + const char *other_domname; + + virPCIDeviceGetUsedBy(other, &other_drvname, &other_domname); + if (other_drvname && other_domname) + virReportError(VIR_ERR_OPERATION_INVALID, + _("PCI device %s is in use by driver %s,domain %s"), + virPCIDeviceGetName(dev), other_drvname, + other_domname); + else + virReportError(VIR_ERR_OPERATION_INVALID, + _("PCI device %s is already in use"), + virPCIDeviceGetName(dev)); + goto cleanup; + } + } + + /* Loop 2: detach managed devices */ + for (i = 0; i < virPCIDeviceListCount(pcidevs); i++) { + virPCIDevicePtr dev = virPCIDeviceListGet(pcidevs, i); + if (virPCIDeviceGetManaged(dev) && + virPCIDeviceDetach(dev, mgr->activePciHostdevs, NULL) < 0) + goto reattachdevs; + } + + /* Loop 3: Now that all the PCI hostdevs have been detached, we + * can safely reset them */ + for (i = 0; i < virPCIDeviceListCount(pcidevs); i++) { + virPCIDevicePtr dev = virPCIDeviceListGet(pcidevs, i); + if (virPCIDeviceReset(dev, mgr->activePciHostdevs, + mgr->inactivePciHostdevs) < 0) + goto reattachdevs; + } + + /* Loop 4: For SRIOV network devices, Now that we have detached the + * the network device, set the netdev config */ + for (i = 0; i < nhostdevs; i++) { + virDomainHostdevDefPtr hostdev = hostdevs[i]; + if (hostdev->mode != VIR_DOMAIN_HOSTDEV_MODE_SUBSYS) + continue; + if (hostdev->source.subsys.type != VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_PCI) + continue; + if (hostdev->parent.type == VIR_DOMAIN_DEVICE_NET && + hostdev->parent.data.net) { + if (virHostdevNetConfigReplace(hostdev, uuid, mgr->stateDir) < 0) + goto resetvfnetconfig; + } + last_processed_hostdev_vf = i; + } + + /* Loop 5: Now mark all the devices as active */ + for (i = 0; i < virPCIDeviceListCount(pcidevs); i++) { + virPCIDevicePtr dev = virPCIDeviceListGet(pcidevs, i); + if (virPCIDeviceListAdd(mgr->activePciHostdevs, dev) < 0) + goto inactivedevs; + } + + /* Loop 6: Now remove the devices from inactive list. */ + for (i = 0; i < virPCIDeviceListCount(pcidevs); i++) { + virPCIDevicePtr dev = virPCIDeviceListGet(pcidevs, i); + virPCIDeviceListDel(mgr->inactivePciHostdevs, dev); + } + + /* Loop 7: Now set the used_by_domain of the device in + * driver->activePciHostdevs as domain name. + */ + for (i = 0; i < virPCIDeviceListCount(pcidevs); i++) { + virPCIDevicePtr dev, activeDev; + + dev = virPCIDeviceListGet(pcidevs, i); + activeDev = virPCIDeviceListFind(mgr->activePciHostdevs, dev); + + if (activeDev) + virPCIDeviceSetUsedBy(activeDev, drv_name, dom_name); + } + + /* Loop 8: Now set the original states for hostdev def */ + for (i = 0; i < nhostdevs; i++) { + virPCIDevicePtr dev; + virPCIDevicePtr pcidev; + virDomainHostdevDefPtr hostdev = hostdevs[i]; + + if (hostdev->mode != VIR_DOMAIN_HOSTDEV_MODE_SUBSYS) + continue; + if (hostdev->source.subsys.type != VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_PCI) + continue; + + dev = virPCIDeviceNew(hostdev->source.subsys.u.pci.addr.domain, + hostdev->source.subsys.u.pci.addr.bus, + hostdev->source.subsys.u.pci.addr.slot, + hostdev->source.subsys.u.pci.addr.function); + + /* original states "unbind_from_stub", "remove_slot", + * "reprobe" were already set by pciDettachDevice in + * loop 2. + */ + if ((pcidev = virPCIDeviceListFind(pcidevs, dev))) { + hostdev->origstates.states.pci.unbind_from_stub = + virPCIDeviceGetUnbindFromStub(pcidev); + hostdev->origstates.states.pci.remove_slot = + virPCIDeviceGetRemoveSlot(pcidev); + hostdev->origstates.states.pci.reprobe = + virPCIDeviceGetReprobe(pcidev); + } + + virPCIDeviceFree(dev); + } + + /* Loop 9: Now steal all the devices from pcidevs */ + while (virPCIDeviceListCount(pcidevs) > 0) + virPCIDeviceListStealIndex(pcidevs, 0); + + ret = 0; + goto cleanup; + +inactivedevs: + /* Only steal all the devices from driver->activePciHostdevs. We will + * free them in virObjectUnref(). + */ + while (virPCIDeviceListCount(pcidevs) > 0) { + virPCIDevicePtr dev = virPCIDeviceListGet(pcidevs, 0); + virPCIDeviceListSteal(mgr->activePciHostdevs, dev); + } + +resetvfnetconfig: + for (i = 0; + last_processed_hostdev_vf != -1 && i < last_processed_hostdev_vf; i++) + virHostdevNetConfigRestore(hostdevs[i], mgr->stateDir, NULL); + +reattachdevs: + for (i = 0; i < virPCIDeviceListCount(pcidevs); i++) { + virPCIDevicePtr dev = virPCIDeviceListGet(pcidevs, i); + virPCIDeviceReattach(dev, mgr->activePciHostdevs, NULL); + } + +cleanup: + virObjectUnlock(mgr->activePciHostdevs); + virObjectUnlock(mgr->inactivePciHostdevs); + virObjectUnref(pcidevs); + return ret; +} + +static int +virHostdevFindUSBDevice(virDomainHostdevDefPtr hostdev, + bool mandatory, + virUSBDevicePtr *usb) +{ + unsigned vendor = hostdev->source.subsys.u.usb.vendor; + unsigned product = hostdev->source.subsys.u.usb.product; + unsigned bus = hostdev->source.subsys.u.usb.bus; + unsigned device = hostdev->source.subsys.u.usb.device; + bool autoAddress = hostdev->source.subsys.u.usb.autoAddress; + int rc; + + *usb = NULL; + + if (vendor && bus) { + rc = virUSBDeviceFind(vendor, product, bus, device, + NULL, + autoAddress ? false : mandatory, + usb); + if (rc < 0) { + return -1; + } else if (!autoAddress) { + goto out; + } else { + VIR_INFO("USB device %x:%x could not be found at previous" + " address (bus:%u device:%u)", + vendor, product, bus, device); + } + } + + /* When vendor is specified, its USB address is either unspecified or the + * device could not be found at the USB device where it had been + * automatically found before. + */ + if (vendor) { + virUSBDeviceListPtr devs; + + rc = virUSBDeviceFindByVendor(vendor, product, NULL, mandatory, &devs); + if (rc < 0) + return -1; + + if (rc == 1) { + *usb = virUSBDeviceListGet(devs, 0); + virUSBDeviceListSteal(devs, *usb); + } + virObjectUnref(devs); + + if (rc == 0) { + goto out; + } else if (rc > 1) { + if (autoAddress) { + virReportError(VIR_ERR_OPERATION_FAILED, + _("Multiple USB devices for %x:%x were found, " + "but none of them is at bus:%u device:%u"), + vendor, product, bus, device); + } else { + virReportError(VIR_ERR_OPERATION_FAILED, + _("Multiple USB devices for %x:%x, " + "use <address> to specify one"), + vendor, product); + } + return -1; + } + + hostdev->source.subsys.u.usb.bus = virUSBDeviceGetBus(*usb); + hostdev->source.subsys.u.usb.device = virUSBDeviceGetDevno(*usb); + hostdev->source.subsys.u.usb.autoAddress = true; + + if (autoAddress) { + VIR_INFO("USB device %x:%x found at bus:%u device:%u (moved" + " from bus:%u device:%u)", + vendor, product, + hostdev->source.subsys.u.usb.bus, + hostdev->source.subsys.u.usb.device, + bus, device); + } + } else if (!vendor && bus) { + if (virUSBDeviceFindByBus(bus, device, NULL, mandatory, usb) < 0) + return -1; + } + +out: + if (!*usb) + hostdev->missing = true; + return 0; +} + +static int +virHostdevMarkUsbHostdevs(virHostdevManagerPtr mgr, + const char *drv_name, + const char *dom_name, + virUSBDeviceListPtr list) +{ + size_t i, j; + unsigned int count; + virUSBDevicePtr tmp; + + virObjectLock(mgr->activeUsbHostdevs); + count = virUSBDeviceListCount(list); + + for (i = 0; i < count; i++) { + virUSBDevicePtr usb = virUSBDeviceListGet(list, i); + if ((tmp = virUSBDeviceListFind(mgr->activeUsbHostdevs, usb))) { + const char *other_drvname; + const char *other_domname; + + virUSBDeviceGetUsedBy(tmp, &other_drvname, &other_domname); + if (other_drvname && other_domname) + virReportError(VIR_ERR_OPERATION_INVALID, + _("USB device %s is in use by " + "driver %s,domain %s"), + virUSBDeviceGetName(tmp), + other_drvname, other_domname); + else + virReportError(VIR_ERR_OPERATION_INVALID, + _("USB device %s is already in use"), + virUSBDeviceGetName(tmp)); + goto error; + } + + virUSBDeviceSetUsedBy(usb, drv_name, dom_name); + VIR_DEBUG("Adding %03d.%03d driver= %s dom=%s to activeUsbHostdevs", + virUSBDeviceGetBus(usb), virUSBDeviceGetDevno(usb), + drv_name, dom_name); + /* + * The caller is responsible to steal these usb devices + * from the virUSBDeviceList that passed in on success, + * perform rollback on failure. + */ + if (virUSBDeviceListAdd(mgr->activeUsbHostdevs, usb) < 0) + goto error; + } + + virObjectUnlock(mgr->activeUsbHostdevs); + return 0; + +error: + for (j = 0; j < i; j++) { + tmp = virUSBDeviceListGet(list, j); + virUSBDeviceListSteal(mgr->activeUsbHostdevs, tmp); + } + virObjectUnlock(mgr->activeUsbHostdevs); + return -1; +} + +int +virHostdevPrepareUsbHostdevs(virHostdevManagerPtr mgr, + const char *drv_name, + const char *dom_name, + virDomainHostdevDefPtr *hostdevs, + int nhostdevs, + bool coldBoot) +{ + size_t i; + int ret = -1; + virUSBDeviceListPtr list; + virUSBDevicePtr tmp; + + /* To prevent situation where USB device is assigned to two domains + * we need to keep a list of currently assigned USB devices. + * This is done in several loops which cannot be joined into one + * big loop. + */ + if (!(list = virUSBDeviceListNew())) + goto cleanup; + + /* Loop 1: build temporary list + */ + for (i = 0; i < nhostdevs; i++) { + virDomainHostdevDefPtr hostdev = hostdevs[i]; + bool required = true; + virUSBDevicePtr usb; + + if (hostdev->mode != VIR_DOMAIN_HOSTDEV_MODE_SUBSYS) + continue; + if (hostdev->source.subsys.type != VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_USB) + continue; + + if (hostdev->startupPolicy == VIR_DOMAIN_STARTUP_POLICY_OPTIONAL || + (hostdev->startupPolicy == VIR_DOMAIN_STARTUP_POLICY_REQUISITE && + !coldBoot)) + required = false; + + if (virHostdevFindUSBDevice(hostdev, required, &usb) < 0) + goto cleanup; + + if (usb && virUSBDeviceListAdd(list, usb) < 0) { + virUSBDeviceFree(usb); + goto cleanup; + } + } + + /* Mark devices in temporary list as used by @name + * and add them do active list. However, if something goes + * wrong, perform rollback. + */ + if (virHostdevMarkUsbHostdevs(mgr, drv_name, dom_name, list) < 0) + goto cleanup; + + /* Loop 2: Temporary list was successfully merged with + * active list, so steal all items to avoid freeing them + * in cleanup label. + */ + while (virUSBDeviceListCount(list) > 0) { + tmp = virUSBDeviceListGet(list, 0); + virUSBDeviceListSteal(list, tmp); + } + + ret = 0; + +cleanup: + virObjectUnref(list); + return ret; +} + +int +virHostdevPrepareScsiHostdevs(virHostdevManagerPtr mgr, + const char *drv_name, + const char *dom_name, + virDomainHostdevDefPtr *hostdevs, + int nhostdevs) +{ + size_t i, j; + int count; + virSCSIDeviceListPtr list; + virSCSIDevicePtr tmp; + + /* To prevent situation where SCSI device is assigned to two domains + * we need to keep a list of currently assigned SCSI devices. + */ + if (!(list = virSCSIDeviceListNew())) + goto cleanup; + + /* Loop 1: build temporary list */ + for (i = 0; i < nhostdevs; i++) { + virDomainHostdevDefPtr hostdev = hostdevs[i]; + virSCSIDevicePtr scsi; + + if (hostdev->mode != VIR_DOMAIN_HOSTDEV_MODE_SUBSYS || + hostdev->source.subsys.type != VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_SCSI) + continue; + + if (hostdev->managed) { + virReportError(VIR_ERR_XML_ERROR, "%s", + _("SCSI host device doesn't support managed mode")); + goto cleanup; + } + + if (!(scsi = virSCSIDeviceNew(hostdev->source.subsys.u.scsi.adapter, + hostdev->source.subsys.u.scsi.bus, + hostdev->source.subsys.u.scsi.target, + hostdev->source.subsys.u.scsi.unit, + hostdev->readonly))) + goto cleanup; + + if (scsi && virSCSIDeviceListAdd(list, scsi) < 0) { + virSCSIDeviceFree(scsi); + goto cleanup; + } + } + + /* Loop 2: Mark devices in temporary list as used by + * and add them to driver list. However, if something goes + * wrong, perform rollback. + */ + virObjectLock(mgr->activeScsiHostdevs); + count = virSCSIDeviceListCount(list); + + for (i = 0; i < count; i++) { + virSCSIDevicePtr scsi = virSCSIDeviceListGet(list, i); + if ((tmp = virSCSIDeviceListFind(mgr->activeScsiHostdevs, scsi))) { + const char *other_drvname; + const char *other_domname; + + virSCSIDeviceGetUsedBy(tmp, &other_drvname, &other_domname); + if (other_drvname && other_domname) + virReportError(VIR_ERR_OPERATION_INVALID, + _("SCSI device %s is in use by " + "driver %s domain %s"), + virSCSIDeviceGetName(tmp), + other_drvname, other_domname); + else + virReportError(VIR_ERR_OPERATION_INVALID, + _("SCSI device %s is already in use"), + virSCSIDeviceGetName(tmp)); + goto error; + } + + virSCSIDeviceSetUsedBy(scsi, drv_name, dom_name); + VIR_DEBUG("Adding %s to activeScsiHostdevs", virSCSIDeviceGetName(scsi)); + + if (virSCSIDeviceListAdd(mgr->activeScsiHostdevs, scsi) < 0) + goto error; + } + + virObjectUnlock(mgr->activeScsiHostdevs); + + /* Loop 3: Temporary list was successfully merged with + * driver list, so steal all items to avoid freeing them + * when freeing temporary list. + */ + while (virSCSIDeviceListCount(list) > 0) { + tmp = virSCSIDeviceListGet(list, 0); + virSCSIDeviceListSteal(list, tmp); + } + + virObjectUnref(list); + return 0; + +error: + for (j = 0; j < i; j++) { + tmp = virSCSIDeviceListGet(list, j); + virSCSIDeviceListSteal(mgr->activeScsiHostdevs, tmp); + } + virObjectUnlock(mgr->activeScsiHostdevs); +cleanup: + virObjectUnref(list); + return -1; +} + +int +virHostdevPrepareDomainHostdevs(virHostdevManagerPtr mgr, + const char *driver, + virDomainDefPtr def, + unsigned int flags) +{ + if (!def->nhostdevs) + return 0; + + if (flags & VIR_SP_PCI_HOSTDEV) { + if (virHostdevPreparePciHostdevs(mgr, driver, + def->name, def->uuid, + def->hostdevs, + def->nhostdevs, + flags) < 0) + return -1; + } + + if (flags & VIR_SP_USB_HOSTDEV) { + bool coldBoot = (flags & VIR_COLD_BOOT)?true:false; + if (virHostdevPrepareUsbHostdevs(mgr, driver, def->name, + def->hostdevs, def->nhostdevs, + coldBoot) < 0) + return -1; + } + + if (flags & VIR_SP_SCSI_HOSTDEV) { + if (virHostdevPrepareScsiHostdevs(mgr, driver, def->name, + def->hostdevs, def->nhostdevs) < 0) + return -1; + } + + return 0; +} + +/* + * Pre-condition: mgr->inactivePciHostdevs & mgr->activePciHostdevs + * are locked + */ +static void +virHostdevReAttachPciDevice(virHostdevManagerPtr mgr, virPCIDevicePtr dev) +{ + /* If the device is not managed and was attached to guest + * successfully, it must have been inactive. + */ + if (!virPCIDeviceGetManaged(dev)) { + if (virPCIDeviceListAdd(mgr->inactivePciHostdevs, dev) < 0) + virPCIDeviceFree(dev); + return; + } + + /* Wait for device cleanup if it is qemu/kvm */ + if (STREQ(virPCIDeviceGetStubDriver(dev), "pci-stub")) { + int retries = 100; + while (virPCIDeviceWaitForCleanup(dev, "kvm_assigned_device") + && retries) { + usleep(100*1000); + retries--; + } + } + + if (virPCIDeviceReattach(dev, mgr->activePciHostdevs, + mgr->inactivePciHostdevs) < 0) { + virErrorPtr err = virGetLastError(); + VIR_ERROR(_("Failed to re-attach PCI device: %s"), + err ? err->message : _("unknown error")); + virResetError(err); + } + virPCIDeviceFree(dev); +} + +/* + * Pre-condition: mgr->activePciHostdevs is locked + */ +static virPCIDeviceListPtr +virHostdevGetActivePciHostDeviceList(virHostdevManagerPtr mgr, + virDomainHostdevDefPtr *hostdevs, + int nhostdevs) +{ + virPCIDeviceListPtr list; + size_t i; + + if (!(list = virPCIDeviceListNew())) + return NULL; + + for (i = 0; i < nhostdevs; i++) { + virDomainHostdevDefPtr hostdev = hostdevs[i]; + virPCIDevicePtr dev; + virPCIDevicePtr activeDev; + + if (hostdev->mode != VIR_DOMAIN_HOSTDEV_MODE_SUBSYS) + continue; + if (hostdev->source.subsys.type != VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_PCI) + continue; + + dev = virPCIDeviceNew(hostdev->source.subsys.u.pci.addr.domain, + hostdev->source.subsys.u.pci.addr.bus, + hostdev->source.subsys.u.pci.addr.slot, + hostdev->source.subsys.u.pci.addr.function); + if (!dev) { + virObjectUnref(list); + return NULL; + } + + if ((activeDev = virPCIDeviceListFind(mgr->activePciHostdevs, dev))) { + if (virPCIDeviceListAdd(list, activeDev) < 0) { + virPCIDeviceFree(dev); + virObjectUnref(list); + return NULL; + } + } + + virPCIDeviceFree(dev); + } + + return list; +} + +int +virHostdevUpdateActivePciHostdevs(virHostdevManagerPtr mgr, + virDomainHostdevDefPtr *hostdevs, + int nhostdevs, + const char *drv_name, + const char *dom_name) +{ + virDomainHostdevDefPtr hostdev = NULL; + virPCIDevicePtr dev = NULL; + size_t i; + int ret = -1; + + if (!nhostdevs) + return 0; + + virObjectLock(mgr->activePciHostdevs); + virObjectLock(mgr->inactivePciHostdevs); + + for (i = 0; i < nhostdevs; i++) { + hostdev = hostdevs[i]; + + if (hostdev->mode != VIR_DOMAIN_HOSTDEV_MODE_SUBSYS) + continue; + if (hostdev->source.subsys.type != VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_PCI) + continue; + + dev = virPCIDeviceNew(hostdev->source.subsys.u.pci.addr.domain, + hostdev->source.subsys.u.pci.addr.bus, + hostdev->source.subsys.u.pci.addr.slot, + hostdev->source.subsys.u.pci.addr.function); + + if (!dev) + goto cleanup; + + virPCIDeviceSetManaged(dev, hostdev->managed); + switch (hostdev->source.subsys.u.pci.backend) { + case VIR_DOMAIN_HOSTDEV_PCI_BACKEND_VFIO: + if (virPCIDeviceSetStubDriver(dev, "vfio-pci") < 0) + goto cleanup; + break; + + case VIR_DOMAIN_HOSTDEV_PCI_BACKEND_XEN : + if (virPCIDeviceSetStubDriver(dev, "pciback") < 0) + goto cleanup; + break; + + case VIR_DOMAIN_HOSTDEV_PCI_BACKEND_KVM : + case VIR_DOMAIN_HOSTDEV_PCI_BACKEND_DEFAULT: + if (virPCIDeviceSetStubDriver(dev, "pci-stub") < 0) + goto cleanup; + break; + } + virPCIDeviceSetUsedBy(dev, drv_name, dom_name); + + /* Setup the original states for the PCI device */ + virPCIDeviceSetUnbindFromStub(dev, hostdev->origstates.states.pci.unbind_from_stub); + virPCIDeviceSetRemoveSlot(dev, hostdev->origstates.states.pci.remove_slot); + virPCIDeviceSetReprobe(dev, hostdev->origstates.states.pci.reprobe); + + if (virPCIDeviceListAdd(mgr->activePciHostdevs, dev) < 0) + goto cleanup; + dev = NULL; + } + + ret = 0; +cleanup: + virPCIDeviceFree(dev); + virObjectUnlock(mgr->activePciHostdevs); + virObjectUnlock(mgr->inactivePciHostdevs); + return ret; +} + + +int +virHostdevUpdateActiveUsbHostdevs(virHostdevManagerPtr mgr, + virDomainHostdevDefPtr *hostdevs, + int nhostdevs, + const char *drv_name, + const char *dom_name) +{ + virDomainHostdevDefPtr hostdev = NULL; + size_t i; + int ret = -1; + + if (!nhostdevs) + return 0; + + virObjectLock(mgr->activeUsbHostdevs); + for (i = 0; i < nhostdevs; i++) { + virUSBDevicePtr usb = NULL; + hostdev = hostdevs[i]; + + if (hostdev->mode != VIR_DOMAIN_HOSTDEV_MODE_SUBSYS) + continue; + if (hostdev->source.subsys.type != VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_USB) + continue; + + usb = virUSBDeviceNew(hostdev->source.subsys.u.usb.bus, + hostdev->source.subsys.u.usb.device, + NULL); + if (!usb) { + VIR_WARN("Unable to reattach USB device %03d.%03d " + "on driver %s domain %s", + hostdev->source.subsys.u.usb.bus, + hostdev->source.subsys.u.usb.device, + drv_name, dom_name); + continue; + } + + virUSBDeviceSetUsedBy(usb, drv_name, dom_name); + + if (virUSBDeviceListAdd(mgr->activeUsbHostdevs, usb) < 0) { + virUSBDeviceFree(usb); + goto cleanup; + } + } + ret = 0; +cleanup: + virObjectUnlock(mgr->activeUsbHostdevs); + return ret; +} + +int +virHostdevUpdateActiveScsiHostdevs(virHostdevManagerPtr mgr, + virDomainHostdevDefPtr *hostdevs, + int nhostdevs, + const char *drv_name, + const char *dom_name) +{ + virDomainHostdevDefPtr hostdev = NULL; + size_t i; + int ret = -1; + + if (!nhostdevs) + return 0; + + virObjectLock(mgr->activeScsiHostdevs); + for (i = 0; i < nhostdevs; i++) { + virSCSIDevicePtr scsi = NULL; + hostdev = hostdevs[i]; + + if (hostdev->mode != VIR_DOMAIN_HOSTDEV_MODE_SUBSYS || + hostdev->source.subsys.type != VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_SCSI) + continue; + + if (!(scsi = virSCSIDeviceNew(hostdev->source.subsys.u.scsi.adapter, + hostdev->source.subsys.u.scsi.bus, + hostdev->source.subsys.u.scsi.target, + hostdev->source.subsys.u.scsi.unit, + hostdev->readonly))) + goto cleanup; + + virSCSIDeviceSetUsedBy(scsi, drv_name, dom_name); + + if (virSCSIDeviceListAdd(mgr->activeScsiHostdevs, scsi) < 0) { + virSCSIDeviceFree(scsi); + goto cleanup; + } + } + ret = 0; + +cleanup: + virObjectUnlock(mgr->activeScsiHostdevs); + return ret; +} + +int +virHostdevUpdateActiveHostdevs(virHostdevManagerPtr mgr, + const char *driver, + virDomainDefPtr def, + unsigned int flags) +{ + if (!def->nhostdevs) + return 0; + + if (flags & VIR_SP_PCI_HOSTDEV) { + if (virHostdevUpdateActivePciHostdevs(mgr, + def->hostdevs, + def->nhostdevs, + driver, def->name) < 0) + return -1; + } + + if (flags & VIR_SP_USB_HOSTDEV) { + if (virHostdevUpdateActiveUsbHostdevs(mgr, + def->hostdevs, + def->nhostdevs, + driver, def->name) < 0) + return -1; + } + + if (flags & VIR_SP_SCSI_HOSTDEV) { + if (virHostdevUpdateActiveScsiHostdevs(mgr, + def->hostdevs, + def->nhostdevs, + driver, def->name) < 0) + return -1; + } + + return 0; +} + + +void +virHostdevReAttachPciHostdevs(virHostdevManagerPtr mgr, + const char *drv_name, + const char *dom_name, + virDomainHostdevDefPtr *hostdevs, + int nhostdevs) +{ + virPCIDeviceListPtr pcidevs; + size_t i; + char *oldStateDir = NULL; + + virObjectLock(mgr->activePciHostdevs); + virObjectLock(mgr->inactivePciHostdevs); + + /* for upgrade, if netconfig file is not found in mgr->stateDir, + * find in old state dir */ + if (VIR_STRDUP(oldStateDir, QEMU_STATE_DIR) < 0) + goto cleanup; + + if (!(pcidevs = virHostdevGetActivePciHostDeviceList(mgr, + hostdevs, + nhostdevs))) { + virErrorPtr err = virGetLastError(); + VIR_ERROR(_("Failed to allocate PCI device list: %s"), + err ? err->message : _("unknown error")); + virResetError(err); + goto cleanup; + } + + /* Again 4 loops; mark all devices as inactive before reset + * them and reset all the devices before re-attach. + * Attach mac and port profile parameters to devices + */ + for (i = 0; i < virPCIDeviceListCount(pcidevs); i++) { + virPCIDevicePtr dev = virPCIDeviceListGet(pcidevs, i); + virPCIDevicePtr activeDev = NULL; + const char *usedby_drvname; + const char *usedby_domname; + + /* Never delete the dev from list driver->activePciHostdevs + * if it's used by other domain. + */ + activeDev = virPCIDeviceListFind(mgr->activePciHostdevs, dev); + if (activeDev) { + virPCIDeviceGetUsedBy(activeDev, &usedby_drvname, &usedby_domname); + if (STRNEQ_NULLABLE(drv_name, usedby_drvname) || + STRNEQ_NULLABLE(dom_name, usedby_domname)) { + virPCIDeviceListSteal(pcidevs, dev); + continue; + } + } + + virPCIDeviceListSteal(mgr->activePciHostdevs, dev); + } + + /* + * For SRIOV net host devices, unset mac and port profile before + * reset and reattach device + */ + for (i = 0; i < nhostdevs; i++) + virHostdevNetConfigRestore(hostdevs[i], mgr->stateDir, oldStateDir); + + for (i = 0; i < virPCIDeviceListCount(pcidevs); i++) { + virPCIDevicePtr dev = virPCIDeviceListGet(pcidevs, i); + if (virPCIDeviceReset(dev, mgr->activePciHostdevs, + mgr->inactivePciHostdevs) < 0) { + virErrorPtr err = virGetLastError(); + VIR_ERROR(_("Failed to reset PCI device: %s"), + err ? err->message : _("unknown error")); + virResetError(err); + } + } + + while (virPCIDeviceListCount(pcidevs) > 0) { + virPCIDevicePtr dev = virPCIDeviceListStealIndex(pcidevs, 0); + virHostdevReAttachPciDevice(mgr, dev); + } + + virObjectUnref(pcidevs); +cleanup: + VIR_FREE(oldStateDir); + virObjectUnlock(mgr->activePciHostdevs); + virObjectUnlock(mgr->inactivePciHostdevs); +} + +void +virHostdevReAttachUsbHostdevs(virHostdevManagerPtr mgr, + const char *drv_name, + const char *dom_name, + virDomainHostdevDefPtr *hostdevs, + int nhostdevs) +{ + size_t i; + + virObjectLock(mgr->activeUsbHostdevs); + for (i = 0; i < nhostdevs; i++) { + virDomainHostdevDefPtr hostdev = hostdevs[i]; + virUSBDevicePtr usb, tmp; + const char *usedby_drvname; + const char *usedby_domname; + + if (hostdev->mode != VIR_DOMAIN_HOSTDEV_MODE_SUBSYS) + continue; + if (hostdev->source.subsys.type != VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_USB) + continue; + if (hostdev->missing) + continue; + + usb = virUSBDeviceNew(hostdev->source.subsys.u.usb.bus, + hostdev->source.subsys.u.usb.device, + NULL); + + if (!usb) { + VIR_WARN("Unable to reattach USB device %03d.%03d " + "on driver %s domain %s", + hostdev->source.subsys.u.usb.bus, + hostdev->source.subsys.u.usb.device, + drv_name, dom_name); + continue; + } + + /* Delete only those USB devices which belongs + * to domain. Therefore we want to steal only + * those devices from the list which were taken + * by domain */ + + tmp = virUSBDeviceListFind(mgr->activeUsbHostdevs, usb); + virUSBDeviceFree(usb); + + if (!tmp) { + VIR_WARN("Unable to find device %03d.%03d " + "in list of active USB devices", + hostdev->source.subsys.u.usb.bus, + hostdev->source.subsys.u.usb.device); + continue; + } + + virUSBDeviceGetUsedBy(tmp, &usedby_drvname, &usedby_domname); + if (STREQ_NULLABLE(drv_name, usedby_drvname) && + STREQ_NULLABLE(dom_name, usedby_domname)) { + VIR_DEBUG("Removing %03d.%03d dom=%s:%s", + hostdev->source.subsys.u.usb.bus, + hostdev->source.subsys.u.usb.device, + drv_name, dom_name); + virUSBDeviceListDel(mgr->activeUsbHostdevs, tmp); + } + + } + + virObjectUnlock(mgr->activeUsbHostdevs); +} + +void +virHostdevReAttachScsiHostdevs(virHostdevManagerPtr mgr, + const char *drv_name, + const char *dom_name, + virDomainHostdevDefPtr *hostdevs, + int nhostdevs) +{ + size_t i; + + virObjectLock(mgr->activeScsiHostdevs); + for (i = 0; i < nhostdevs; i++) { + virDomainHostdevDefPtr hostdev = hostdevs[i]; + virSCSIDevicePtr scsi, tmp; + const char *usedby_drvname; + const char *usedby_domname; + + if (hostdev->mode != VIR_DOMAIN_HOSTDEV_MODE_SUBSYS || + hostdev->source.subsys.type != VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_SCSI) + continue; + + if (!(scsi = virSCSIDeviceNew(hostdev->source.subsys.u.scsi.adapter, + hostdev->source.subsys.u.scsi.bus, + hostdev->source.subsys.u.scsi.target, + hostdev->source.subsys.u.scsi.unit, + hostdev->readonly))) { + VIR_WARN("Unable to reattach SCSI device %s:%d:%d:%d on driver %s domain %s", + hostdev->source.subsys.u.scsi.adapter, + hostdev->source.subsys.u.scsi.bus, + hostdev->source.subsys.u.scsi.target, + hostdev->source.subsys.u.scsi.unit, + drv_name, dom_name); + continue; + } + + tmp = virSCSIDeviceListFind(mgr->activeScsiHostdevs, scsi); + virSCSIDeviceFree(scsi); + + if (!tmp) { + VIR_WARN("Unable to find device %s:%d:%d:%d " + "in list of active SCSI devices", + hostdev->source.subsys.u.scsi.adapter, + hostdev->source.subsys.u.scsi.bus, + hostdev->source.subsys.u.scsi.target, + hostdev->source.subsys.u.scsi.unit); + continue; + } + + virSCSIDeviceGetUsedBy(tmp, &usedby_drvname, &usedby_domname); + if (STREQ_NULLABLE(usedby_drvname, drv_name) && + STREQ_NULLABLE(usedby_domname, dom_name)) { + VIR_DEBUG("Removing %s:%d:%d:%d driver:%s dom:%s from activeScsiHostdevs", + hostdev->source.subsys.u.scsi.adapter, + hostdev->source.subsys.u.scsi.bus, + hostdev->source.subsys.u.scsi.target, + hostdev->source.subsys.u.scsi.unit, + drv_name, dom_name); + virSCSIDeviceListDel(mgr->activeScsiHostdevs, tmp); + } + } + + virObjectUnlock(mgr->activeScsiHostdevs); +} + +void +virHostdevReAttachDomainHostdevs(virHostdevManagerPtr mgr, + const char *driver, + virDomainDefPtr def, + unsigned int flags) +{ + if (!def->nhostdevs) + return; + + if (flags & VIR_SP_PCI_HOSTDEV) { + virHostdevReAttachPciHostdevs(mgr, driver, def->name, + def->hostdevs, def->nhostdevs); + } + + if (flags & VIR_SP_USB_HOSTDEV) { + virHostdevReAttachUsbHostdevs(mgr, driver, def->name, + def->hostdevs, def->nhostdevs); + } + + if (flags & VIR_SP_SCSI_HOSTDEV) { + virHostdevReAttachScsiHostdevs(mgr, driver, def->name, + def->hostdevs, def->nhostdevs); + } +} + +/* following functions are used by NodeDevDetach/Reattach/Reset */ +int +virHostdevPciNodeDeviceDetach(virHostdevManagerPtr mgr, + virPCIDevicePtr pci) +{ + int ret; + + virObjectLock(mgr->activePciHostdevs); + virObjectLock(mgr->inactivePciHostdevs); + if (virPCIDeviceDetach(pci, mgr->activePciHostdevs, + mgr->inactivePciHostdevs) < 0) + ret = -1; + else + ret = 0; + + virObjectUnlock(mgr->inactivePciHostdevs); + virObjectUnlock(mgr->activePciHostdevs); + return ret; +} + +int +virHostdevPciNodeDeviceReAttach(virHostdevManagerPtr mgr, + virPCIDevicePtr pci) +{ + int ret = -1; + + virPCIDevicePtr other; + + virObjectLock(mgr->activePciHostdevs); + virObjectLock(mgr->inactivePciHostdevs); + other = virPCIDeviceListFind(mgr->activePciHostdevs, pci); + if (other) { + const char *other_drvname; + const char *other_domname; + + virPCIDeviceGetUsedBy(other, &other_drvname, &other_domname); + if (other_drvname && other_domname) + virReportError(VIR_ERR_OPERATION_INVALID, + _("PCI device %s is still in use by driver %s, domain %s"), + virPCIDeviceGetName(pci), other_drvname, other_domname); + else + virReportError(VIR_ERR_OPERATION_INVALID, + _("PCI device %s is still in use"), + virPCIDeviceGetName(pci)); + goto out; + } + + virPCIDeviceReattachInit(pci); + + if (virPCIDeviceReattach(pci, mgr->activePciHostdevs, + mgr->inactivePciHostdevs) < 0) + goto out; + + ret = 0; +out: + virObjectUnlock(mgr->inactivePciHostdevs); + virObjectUnlock(mgr->activePciHostdevs); + return ret; +} + +int +virHostdevPciNodeDeviceReset(virHostdevManagerPtr mgr, + virPCIDevicePtr pci) +{ + int ret; + + virObjectLock(mgr->activePciHostdevs); + virObjectLock(mgr->inactivePciHostdevs); + if (virPCIDeviceReset(pci, mgr->activePciHostdevs, + mgr->inactivePciHostdevs) < 0) + ret = -1; + else + ret = 0; + + virObjectUnlock(mgr->inactivePciHostdevs); + virObjectUnlock(mgr->activePciHostdevs); + return ret; +} diff --git a/src/util/virhostdev.h b/src/util/virhostdev.h new file mode 100644 index 0000000..138e634 --- /dev/null +++ b/src/util/virhostdev.h @@ -0,0 +1,129 @@ +/* virhostdev.h: hostdev management + * + * Copyright (C) 2013 SUSE LINUX Products GmbH, Nuernberg, Germany. + * Copyright (C) 2006-2007, 2009-2013 Red Hat, Inc. + * Copyright (C) 2006 Daniel P. Berrange + * + * This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public + * License as published by the Free Software Foundation; either + * version 2.1 of the License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this library. If not, see + * <http://www.gnu.org/licenses/>. + * + * Author: Chunyan Liu <cyliu@suse.com> + * Author: Daniel P. Berrange <berrange@redhat.com> + */ + +#ifndef __VIR_HOSTDEV_H__ +# define __VIR_HOSTDEV_H__ + +# include "internal.h" + +# include "domain_conf.h" +# include "virpci.h" + +typedef enum { + VIR_SP_PCI_HOSTDEV = (1 << 0), /* support pci passthrough */ + VIR_SP_USB_HOSTDEV = (1 << 1), /* support usb passthrough */ + VIR_SP_SCSI_HOSTDEV = (1 << 2), /* support scsi passthrough */ + + VIR_COLD_BOOT = (1 << 8), /* cold boot */ + VIR_STRICT_ACS_CHECK = (1 << 9), /* strict acs check */ +} virHostdevManagerFlag; + +typedef struct _virHostdevManager virHostdevManager; +typedef virHostdevManager *virHostdevManagerPtr; + +struct virHostdevNameList { + char **names; + size_t nnames; +}; +typedef struct virHostdevNameList *virHostdevNameListPtr; + +virHostdevManagerPtr virHostdevManagerGetDefault(void); + +bool virHostdevHostSupportsPassthroughVFIO(void); + +/* functions used to prepare/unprepare hostdevs for domain */ +int virHostdevPrepareDomainHostdevs(virHostdevManagerPtr mgr, + const char *driver, + virDomainDefPtr def, + unsigned int flags); +void virHostdevReAttachDomainHostdevs(virHostdevManagerPtr mgr, + const char *driver, + virDomainDefPtr def, + unsigned int flags); +int virHostdevPreparePciHostdevs(virHostdevManagerPtr mgr, + const char *drv_name, + const char *dom_name, + const unsigned char *uuid, + virDomainHostdevDefPtr *hostdevs, + int nhostdevs, + unsigned int flags); +int virHostdevPrepareUsbHostdevs(virHostdevManagerPtr mgr, + const char *drv_name, + const char *dom_name, + virDomainHostdevDefPtr *hostdevs, + int nhostdevs, + bool coldBoot); +int virHostdevPrepareScsiHostdevs(virHostdevManagerPtr mgr, + const char *drv_name, + const char *dom_name, + virDomainHostdevDefPtr *hostdevs, + int nhostdevs); +void virHostdevReAttachPciHostdevs(virHostdevManagerPtr mgr, + const char *drv_name, + const char *dom_name, + virDomainHostdevDefPtr *hostdevs, + int nhostdevs); +void virHostdevReAttachUsbHostdevs(virHostdevManagerPtr mgr, + const char *drv_name, + const char *dom_name, + virDomainHostdevDefPtr *hostdevs, + int nhostdevs); +void virHostdevReAttachScsiHostdevs(virHostdevManagerPtr mgr, + const char *drv_name, + const char *dom_name, + virDomainHostdevDefPtr *hostdevs, + int nhostdevs); +int +virHostdevUpdateActivePciHostdevs(virHostdevManagerPtr mgr, + virDomainHostdevDefPtr *hostdevs, + int nhostdevs, + const char *drv_name, + const char *dom_name); +int +virHostdevUpdateActiveUsbHostdevs(virHostdevManagerPtr mgr, + virDomainHostdevDefPtr *hostdevs, + int nhostdevs, + const char *drv_name, + const char *dom_name); +int +virHostdevUpdateActiveScsiHostdevs(virHostdevManagerPtr mgr, + virDomainHostdevDefPtr *hostdevs, + int nhostdevs, + const char *drv_name, + const char *dom_name); +int +virHostdevUpdateActiveHostdevs(virHostdevManagerPtr mgr, + const char *driver, + virDomainDefPtr def, + unsigned int flags); + +/* functions used by NodeDevDetach/Reattach/Reset */ +int virHostdevPciNodeDeviceDetach(virHostdevManagerPtr mgr, + virPCIDevicePtr pci); +int virHostdevPciNodeDeviceReAttach(virHostdevManagerPtr mgr, + virPCIDevicePtr pci); +int virHostdevPciNodeDeviceReset(virHostdevManagerPtr mgr, + virPCIDevicePtr pci); + +#endif /* __VIR_HOSTDEV_H__ */ diff --git a/src/util/virpci.c b/src/util/virpci.c index 65d7168..76ba0fe 100644 --- a/src/util/virpci.c +++ b/src/util/virpci.c @@ -62,7 +62,10 @@ struct _virPCIDevice { char name[PCI_ADDR_LEN]; /* domain:bus:slot.function */ char id[PCI_ID_LEN]; /* product vendor */ char *path; - const char *used_by; /* The domain which uses the device */ + + /* The driver:domain which uses the device */ + char *used_by_drvname; + char *used_by_domname; unsigned int pcie_cap_pos; unsigned int pci_pm_cap_pos; @@ -1572,6 +1575,8 @@ virPCIDeviceFree(virPCIDevicePtr dev) VIR_DEBUG("%s %s: freeing", dev->id, dev->name); VIR_FREE(dev->path); VIR_FREE(dev->stubDriver); + VIR_FREE(dev->used_by_drvname); + VIR_FREE(dev->used_by_domname); VIR_FREE(dev); } @@ -1641,16 +1646,27 @@ virPCIDeviceSetReprobe(virPCIDevicePtr dev, bool reprobe) dev->reprobe = reprobe; } -void -virPCIDeviceSetUsedBy(virPCIDevicePtr dev, const char *name) +int +virPCIDeviceSetUsedBy(virPCIDevicePtr dev, + const char *drv_name, + const char *dom_name) { - dev->used_by = name; + if (VIR_STRDUP(dev->used_by_drvname, drv_name) < 0) + return -1; + + if (VIR_STRDUP(dev->used_by_domname, dom_name) < 0) + return -1; + + return 0; } -const char * -virPCIDeviceGetUsedBy(virPCIDevicePtr dev) +void +virPCIDeviceGetUsedBy(virPCIDevicePtr dev, + const char **drv_name, + const char **dom_name) { - return dev->used_by; + *drv_name = dev->used_by_drvname; + *dom_name = dev->used_by_domname; } void virPCIDeviceReattachInit(virPCIDevicePtr pci) diff --git a/src/util/virpci.h b/src/util/virpci.h index 0aa6fee..f3f9e08 100644 --- a/src/util/virpci.h +++ b/src/util/virpci.h @@ -65,9 +65,12 @@ unsigned int virPCIDeviceGetManaged(virPCIDevice *dev); int virPCIDeviceSetStubDriver(virPCIDevicePtr dev, const char *driver); const char *virPCIDeviceGetStubDriver(virPCIDevicePtr dev); -void virPCIDeviceSetUsedBy(virPCIDevice *dev, - const char *used_by); -const char *virPCIDeviceGetUsedBy(virPCIDevice *dev); +int virPCIDeviceSetUsedBy(virPCIDevice *dev, + const char *drv_name, + const char *dom_name); +void virPCIDeviceGetUsedBy(virPCIDevice *dev, + const char **drv_name, + const char **dom_name); unsigned int virPCIDeviceGetUnbindFromStub(virPCIDevicePtr dev); void virPCIDeviceSetUnbindFromStub(virPCIDevice *dev, bool unbind); diff --git a/src/util/virscsi.c b/src/util/virscsi.c index 7aca9e6..062e8bd 100644 --- a/src/util/virscsi.c +++ b/src/util/virscsi.c @@ -55,7 +55,10 @@ struct _virSCSIDevice { char *name; /* adapter:bus:target:unit */ char *id; /* model:vendor */ char *sg_path; /* e.g. /dev/sg2 */ - const char *used_by; /* name of the domain using this dev */ + + /* driver:domain using this dev */ + char *used_by_drvname; + char *used_by_domname; bool readonly; }; @@ -259,20 +262,31 @@ virSCSIDeviceFree(virSCSIDevicePtr dev) VIR_FREE(dev->id); VIR_FREE(dev->name); VIR_FREE(dev->sg_path); + VIR_FREE(dev->used_by_drvname); + VIR_FREE(dev->used_by_domname); VIR_FREE(dev); } -void +int virSCSIDeviceSetUsedBy(virSCSIDevicePtr dev, - const char *name) + const char *drvname, + const char *domname) { - dev->used_by = name; + if (VIR_STRDUP(dev->used_by_drvname, drvname) < 0) + return -1; + if (VIR_STRDUP(dev->used_by_domname, domname) < 0) + return -1; + + return 0; } -const char * -virSCSIDeviceGetUsedBy(virSCSIDevicePtr dev) +void +virSCSIDeviceGetUsedBy(virSCSIDevicePtr dev, + const char **drvname, + const char **domname) { - return dev->used_by; + *drvname = dev->used_by_drvname; + *domname = dev->used_by_domname; } const char * diff --git a/src/util/virscsi.h b/src/util/virscsi.h index cce5df4..263b175 100644 --- a/src/util/virscsi.h +++ b/src/util/virscsi.h @@ -49,8 +49,12 @@ virSCSIDevicePtr virSCSIDeviceNew(const char *adapter, bool readonly); void virSCSIDeviceFree(virSCSIDevicePtr dev); -void virSCSIDeviceSetUsedBy(virSCSIDevicePtr dev, const char *name); -const char *virSCSIDeviceGetUsedBy(virSCSIDevicePtr dev); +int virSCSIDeviceSetUsedBy(virSCSIDevicePtr dev, + const char *drvname, + const char *domname); +void virSCSIDeviceGetUsedBy(virSCSIDevicePtr dev, + const char **drvname, + const char **domname); const char *virSCSIDeviceGetName(virSCSIDevicePtr dev); unsigned int virSCSIDeviceGetAdapter(virSCSIDevicePtr dev); unsigned int virSCSIDeviceGetBus(virSCSIDevicePtr dev); diff --git a/src/util/virusb.c b/src/util/virusb.c index e901618..4adc928 100644 --- a/src/util/virusb.c +++ b/src/util/virusb.c @@ -55,7 +55,10 @@ struct _virUSBDevice { char name[USB_ADDR_LEN]; /* domain:bus:slot.function */ char id[USB_ID_LEN]; /* product vendor */ char *path; - const char *used_by; /* name of the domain using this dev */ + + /* driver:domain using this dev */ + char *used_by_drvname; + char *used_by_domname; }; struct _virUSBDeviceList { @@ -375,19 +378,31 @@ virUSBDeviceFree(virUSBDevicePtr dev) return; VIR_DEBUG("%s %s: freeing", dev->id, dev->name); VIR_FREE(dev->path); + VIR_FREE(dev->used_by_drvname); + VIR_FREE(dev->used_by_domname); VIR_FREE(dev); } - -void virUSBDeviceSetUsedBy(virUSBDevicePtr dev, - const char *name) +int +virUSBDeviceSetUsedBy(virUSBDevicePtr dev, + const char *drv_name, + const char *dom_name) { - dev->used_by = name; + if (VIR_STRDUP(dev->used_by_drvname, drv_name) < 0) + return -1; + if (VIR_STRDUP(dev->used_by_domname, dom_name) < 0) + return -1; + + return 0; } -const char * virUSBDeviceGetUsedBy(virUSBDevicePtr dev) +void +virUSBDeviceGetUsedBy(virUSBDevicePtr dev, + const char **drv_name, + const char **dom_name) { - return dev->used_by; + *drv_name = dev->used_by_drvname; + *dom_name = dev->used_by_domname; } const char *virUSBDeviceGetName(virUSBDevicePtr dev) diff --git a/src/util/virusb.h b/src/util/virusb.h index aa59d12..41e680f 100644 --- a/src/util/virusb.h +++ b/src/util/virusb.h @@ -60,8 +60,12 @@ int virUSBDeviceFind(unsigned int vendor, virUSBDevicePtr *usb); void virUSBDeviceFree(virUSBDevicePtr dev); -void virUSBDeviceSetUsedBy(virUSBDevicePtr dev, const char *name); -const char *virUSBDeviceGetUsedBy(virUSBDevicePtr dev); +int virUSBDeviceSetUsedBy(virUSBDevicePtr dev, + const char *drv_name, + const char *dom_name); +void virUSBDeviceGetUsedBy(virUSBDevicePtr dev, + const char **drv_name, + const char **dom_name); const char *virUSBDeviceGetName(virUSBDevicePtr dev); unsigned int virUSBDeviceGetBus(virUSBDevicePtr dev); -- 1.6.0.2

Add pci passthrough to libxl driver, support attach-device, detach-device and start a vm with pci hostdev specified. Signed-off-by: Chunyan Liu <cyliu@suse.com> --- src/libxl/libxl_conf.c | 63 +++++++ src/libxl/libxl_conf.h | 4 + src/libxl/libxl_driver.c | 448 +++++++++++++++++++++++++++++++++++++++++++++- 3 files changed, 514 insertions(+), 1 deletions(-) diff --git a/src/libxl/libxl_conf.c b/src/libxl/libxl_conf.c index d4226b8..31d8f8a 100644 --- a/src/libxl/libxl_conf.c +++ b/src/libxl/libxl_conf.c @@ -1128,6 +1128,66 @@ libxlDriverConfigGet(libxlDriverPrivatePtr driver) return cfg; } +int +libxlMakePci(virDomainHostdevDefPtr hostdev, libxl_device_pci *pcidev) +{ + if (hostdev->mode != VIR_DOMAIN_HOSTDEV_MODE_SUBSYS) + return -1; + if (hostdev->source.subsys.type != VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_PCI) + return -1; + + pcidev->domain = hostdev->source.subsys.u.pci.addr.domain; + pcidev->bus = hostdev->source.subsys.u.pci.addr.bus; + pcidev->dev = hostdev->source.subsys.u.pci.addr.slot; + pcidev->func = hostdev->source.subsys.u.pci.addr.function; + + return 0; +} + +static int +libxlMakePciList(virDomainDefPtr def, libxl_domain_config *d_config) +{ + virDomainHostdevDefPtr *l_hostdevs = def->hostdevs; + size_t nhostdevs = def->nhostdevs; + size_t npcidevs = 0; + libxl_device_pci *x_pcidevs; + size_t i, j; + + if (nhostdevs == 0) + return 0; + + if (VIR_ALLOC_N(x_pcidevs, nhostdevs) < 0) + return -1; + + for (i = 0, j = 0; i < nhostdevs; i++) { + if (l_hostdevs[i]->mode != VIR_DOMAIN_HOSTDEV_MODE_SUBSYS) + continue; + if (l_hostdevs[i]->source.subsys.type != VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_PCI) + continue; + + libxl_device_pci_init(&x_pcidevs[j]); + + if (libxlMakePci(l_hostdevs[i], &x_pcidevs[j]) < 0) + goto error; + + npcidevs++; + j++; + } + + VIR_SHRINK_N(x_pcidevs, nhostdevs, nhostdevs - npcidevs); + d_config->pcidevs = x_pcidevs; + d_config->num_pcidevs = npcidevs; + + return 0; + +error: + for (i = 0; i < npcidevs; i++) + libxl_device_pci_dispose(&x_pcidevs[i]); + + VIR_FREE(x_pcidevs); + return -1; +} + virCapsPtr libxlMakeCapabilities(libxl_ctx *ctx) { @@ -1176,6 +1236,9 @@ libxlBuildDomainConfig(libxlDriverPrivatePtr driver, if (libxlMakeVfbList(driver, def, d_config) < 0) return -1; + if (libxlMakePciList(def, d_config) < 0) + return -1; + d_config->on_reboot = def->onReboot; d_config->on_poweroff = def->onPoweroff; d_config->on_crash = def->onCrash; diff --git a/src/libxl/libxl_conf.h b/src/libxl/libxl_conf.h index 8ba0ee4..31a955a 100644 --- a/src/libxl/libxl_conf.h +++ b/src/libxl/libxl_conf.h @@ -38,6 +38,7 @@ # include "virchrdev.h" +# define LIBXL_DRIVER_NAME "xenlight" # define LIBXL_VNC_PORT_MIN 5900 # define LIBXL_VNC_PORT_MAX 65535 @@ -148,6 +149,9 @@ libxlMakeVfb(libxlDriverPrivatePtr driver, virDomainGraphicsDefPtr l_vfb, libxl_device_vfb *x_vfb); int +libxlMakePci(virDomainHostdevDefPtr hostdev, libxl_device_pci *pcidev); + +int libxlBuildDomainConfig(libxlDriverPrivatePtr driver, virDomainObjPtr vm, libxl_domain_config *d_config); diff --git a/src/libxl/libxl_driver.c b/src/libxl/libxl_driver.c index 4928695..cc4c2e0 100644 --- a/src/libxl/libxl_driver.c +++ b/src/libxl/libxl_driver.c @@ -52,6 +52,7 @@ #include "virsysinfo.h" #include "viraccessapicheck.h" #include "viratomic.h" +#include "virhostdev.h" #define VIR_FROM_THIS VIR_FROM_LIBXL @@ -328,6 +329,7 @@ libxlVmReap(libxlDriverPrivatePtr driver, virDomainShutoffReason reason) { libxlDomainObjPrivatePtr priv = vm->privateData; + virHostdevManagerPtr hostdev_mgr; if (libxl_domain_destroy(priv->ctx, vm->def->id, NULL) < 0) { virReportError(VIR_ERR_INTERNAL_ERROR, @@ -335,6 +337,11 @@ libxlVmReap(libxlDriverPrivatePtr driver, return -1; } + hostdev_mgr = virHostdevManagerGetDefault(); + if (hostdev_mgr != NULL) + virHostdevReAttachDomainHostdevs(hostdev_mgr, LIBXL_DRIVER_NAME, + vm->def, VIR_SP_PCI_HOSTDEV); + libxlVmCleanup(driver, vm, reason); return 0; } @@ -555,6 +562,7 @@ libxlVmStart(libxlDriverPrivatePtr driver, virDomainObjPtr vm, int managed_save_fd = -1; libxlDomainObjPrivatePtr priv = vm->privateData; libxlDriverConfigPtr cfg = libxlDriverConfigGet(driver); + virHostdevManagerPtr hostdev_mgr; if (libxlDomainObjPrivateInitCtx(vm) < 0) goto error; @@ -613,6 +621,13 @@ libxlVmStart(libxlDriverPrivatePtr driver, virDomainObjPtr vm, goto error; } + VIR_DEBUG("Preparing host PCI devices"); + hostdev_mgr = virHostdevManagerGetDefault(); + if (hostdev_mgr == NULL || + virHostdevPrepareDomainHostdevs(hostdev_mgr, LIBXL_DRIVER_NAME, + vm->def, VIR_SP_PCI_HOSTDEV) < 0) + goto error; + /* use as synchronous operations => ao_how = NULL and no intermediate reports => ao_progress = NULL */ if (restore_fd < 0) @@ -708,6 +723,7 @@ libxlReconnectDomain(virDomainObjPtr vm, libxl_dominfo d_info; int len; uint8_t *data = NULL; + virHostdevManagerPtr hostdev_mgr; virObjectLock(vm); @@ -731,6 +747,14 @@ libxlReconnectDomain(virDomainObjPtr vm, /* Update domid in case it changed (e.g. reboot) while we were gone? */ vm->def->id = d_info.domid; + + /* Update hostdev state */ + hostdev_mgr = virHostdevManagerGetDefault(); + if (hostdev_mgr == NULL || + virHostdevUpdateActiveHostdevs(hostdev_mgr, LIBXL_DRIVER_NAME, + vm->def, VIR_SP_PCI_HOSTDEV) < 0) + goto out; + virDomainObjSetState(vm, VIR_DOMAIN_RUNNING, VIR_DOMAIN_RUNNING_UNKNOWN); if (virAtomicIntInc(&driver->nactive) == 1 && driver->inhibitCallback) @@ -2898,6 +2922,95 @@ cleanup: } static int +libxlDomainAttachHostPciDevice(libxlDomainObjPrivatePtr priv, + virDomainObjPtr vm, + virDomainHostdevDefPtr hostdev) +{ + libxl_device_pci pcidev; + virDomainHostdevDefPtr found; + virHostdevManagerPtr hostdev_mgr; + + if (hostdev->source.subsys.type != VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_PCI) + return -1; + + if (virDomainHostdevFind(vm->def, hostdev, &found) >= 0) { + virReportError(VIR_ERR_OPERATION_FAILED, + _("target pci device %.4x:%.2x:%.2x.%.1x already exists"), + hostdev->source.subsys.u.pci.addr.domain, + hostdev->source.subsys.u.pci.addr.bus, + hostdev->source.subsys.u.pci.addr.slot, + hostdev->source.subsys.u.pci.addr.function); + return -1; + } + + if (VIR_REALLOC_N(vm->def->hostdevs, vm->def->nhostdevs + 1) < 0) + return -1; + + hostdev_mgr = virHostdevManagerGetDefault(); + if (hostdev_mgr == NULL || + virHostdevPreparePciHostdevs(hostdev_mgr, LIBXL_DRIVER_NAME, + vm->def->name, vm->def->uuid, + &hostdev, 1, 0) < 0) + goto cleanup; + + if (libxlMakePci(hostdev, &pcidev) < 0) + goto reattach_hostdev; + + if (libxl_device_pci_add(priv->ctx, vm->def->id, &pcidev, 0) < 0) { + virReportError(VIR_ERR_INTERNAL_ERROR, + _("libxenlight failed to attach pci device %.4x:%.2x:%.2x.%.1x"), + hostdev->source.subsys.u.pci.addr.domain, + hostdev->source.subsys.u.pci.addr.bus, + hostdev->source.subsys.u.pci.addr.slot, + hostdev->source.subsys.u.pci.addr.function); + goto reattach_hostdev; + } + + vm->def->hostdevs[vm->def->nhostdevs++] = hostdev; + return 0; + +reattach_hostdev: + virHostdevReAttachPciHostdevs(hostdev_mgr, LIBXL_DRIVER_NAME, + vm->def->name, &hostdev, 1); + +cleanup: + return -1; +} + +static int +libxlDomainAttachHostDevice(libxlDomainObjPrivatePtr priv, + virDomainObjPtr vm, + virDomainDeviceDefPtr dev) +{ + virDomainHostdevDefPtr hostdev = dev->data.hostdev; + + if (hostdev->mode != VIR_DOMAIN_HOSTDEV_MODE_SUBSYS) { + virReportError(VIR_ERR_CONFIG_UNSUPPORTED, + _("hostdev mode '%s' not supported"), + virDomainHostdevModeTypeToString(hostdev->mode)); + return -1; + } + + switch (hostdev->source.subsys.type) { + case VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_PCI: + if (libxlDomainAttachHostPciDevice(priv, vm, hostdev) < 0) + goto error; + break; + + default: + virReportError(VIR_ERR_CONFIG_UNSUPPORTED, + _("hostdev subsys type '%s' not supported"), + virDomainHostdevSubsysTypeToString(hostdev->source.subsys.type)); + goto error; + } + + return 0; + +error: + return -1; +} + +static int libxlDomainDetachDeviceDiskLive(libxlDomainObjPrivatePtr priv, virDomainObjPtr vm, virDomainDeviceDefPtr dev) { @@ -2964,6 +3077,12 @@ libxlDomainAttachDeviceLive(libxlDomainObjPrivatePtr priv, virDomainObjPtr vm, dev->data.disk = NULL; break; + case VIR_DOMAIN_DEVICE_HOSTDEV: + ret = libxlDomainAttachHostDevice(priv, vm, dev); + if (!ret) + dev->data.hostdev = NULL; + break; + default: virReportError(VIR_ERR_CONFIG_UNSUPPORTED, _("device type '%s' cannot be attached"), @@ -2978,6 +3097,8 @@ static int libxlDomainAttachDeviceConfig(virDomainDefPtr vmdef, virDomainDeviceDefPtr dev) { virDomainDiskDefPtr disk; + virDomainHostdevDefPtr hostdev; + virDomainHostdevDefPtr found; switch (dev->type) { case VIR_DOMAIN_DEVICE_DISK: @@ -2992,6 +3113,25 @@ libxlDomainAttachDeviceConfig(virDomainDefPtr vmdef, virDomainDeviceDefPtr dev) /* vmdef has the pointer. Generic codes for vmdef will do all jobs */ dev->data.disk = NULL; break; + case VIR_DOMAIN_DEVICE_HOSTDEV: + hostdev = dev->data.hostdev; + + if (hostdev->source.subsys.type != VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_PCI) + return -1; + + if (virDomainHostdevFind(vmdef, hostdev, &found) >= 0) { + virReportError(VIR_ERR_OPERATION_FAILED, + _("target pci device %.4x:%.2x:%.2x.%.1x\ + already exists"), + hostdev->source.subsys.u.pci.addr.domain, + hostdev->source.subsys.u.pci.addr.bus, + hostdev->source.subsys.u.pci.addr.slot, + hostdev->source.subsys.u.pci.addr.function); + return -1; + } + + virDomainHostdevInsert(vmdef, hostdev); + break; default: virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s", @@ -3002,6 +3142,125 @@ libxlDomainAttachDeviceConfig(virDomainDefPtr vmdef, virDomainDeviceDefPtr dev) } static int +libxlComparePCIDevice(virDomainDefPtr def ATTRIBUTE_UNUSED, + virDomainDeviceDefPtr device ATTRIBUTE_UNUSED, + virDomainDeviceInfoPtr info1, + void *opaque) +{ + virDomainDeviceInfoPtr info2 = opaque; + + if (info1->type != VIR_DOMAIN_DEVICE_ADDRESS_TYPE_PCI || + info2->type != VIR_DOMAIN_DEVICE_ADDRESS_TYPE_PCI) + return 0; + + if (info1->addr.pci.domain == info2->addr.pci.domain && + info1->addr.pci.bus == info2->addr.pci.bus && + info1->addr.pci.slot == info2->addr.pci.slot && + info1->addr.pci.function != info2->addr.pci.function) + return -1; + return 0; +} + +static bool +libxlIsMultiFunctionDevice(virDomainDefPtr def, + virDomainDeviceInfoPtr dev) +{ + if (virDomainDeviceInfoIterate(def, libxlComparePCIDevice, dev) < 0) + return true; + return false; +} + +static int +libxlDomainDetachHostPciDevice(libxlDomainObjPrivatePtr priv, + virDomainObjPtr vm, + virDomainHostdevDefPtr hostdev) +{ + virDomainHostdevSubsysPtr subsys = &hostdev->source.subsys; + libxl_device_pci pcidev; + virDomainHostdevDefPtr detach; + int idx; + virHostdevManagerPtr hostdev_mgr; + + if (subsys->type != VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_PCI) + return -1; + + idx = virDomainHostdevFind(vm->def, hostdev, &detach); + if (idx < 0) { + virReportError(VIR_ERR_OPERATION_FAILED, + _("host pci device %.4x:%.2x:%.2x.%.1x not found"), + subsys->u.pci.addr.domain, subsys->u.pci.addr.bus, + subsys->u.pci.addr.slot, subsys->u.pci.addr.function); + return -1; + } + + if (libxlIsMultiFunctionDevice(vm->def, detach->info)) { + virReportError(VIR_ERR_OPERATION_FAILED, + _("cannot hot unplug multifunction PCI device: %.4x:%.2x:%.2x.%.1x"), + subsys->u.pci.addr.domain, subsys->u.pci.addr.bus, + subsys->u.pci.addr.slot, subsys->u.pci.addr.function); + goto cleanup; + } + + + libxl_device_pci_init(&pcidev); + + if (libxlMakePci(detach, &pcidev) < 0) + goto cleanup; + + if (libxl_device_pci_remove(priv->ctx, vm->def->id, &pcidev, 0) < 0) { + virReportError(VIR_ERR_INTERNAL_ERROR, + _("libxenlight failed to detach pci device\ + %.4x:%.2x:%.2x.%.1x"), + subsys->u.pci.addr.domain, subsys->u.pci.addr.bus, + subsys->u.pci.addr.slot, subsys->u.pci.addr.function); + goto cleanup; + } + + libxl_device_pci_dispose(&pcidev); + + virDomainHostdevRemove(vm->def, idx); + + hostdev_mgr = virHostdevManagerGetDefault(); + if (hostdev_mgr != NULL) + virHostdevReAttachPciHostdevs(hostdev_mgr, LIBXL_DRIVER_NAME, + vm->def->name, &hostdev, 1); + + return 0; + +cleanup: + virDomainHostdevDefFree(detach); + return -1; +} + +static int +libxlDomainDetachHostDevice(libxlDomainObjPrivatePtr priv, + virDomainObjPtr vm, + virDomainDeviceDefPtr dev) +{ + virDomainHostdevDefPtr hostdev = dev->data.hostdev; + virDomainHostdevSubsysPtr subsys = &hostdev->source.subsys; + + if (hostdev->mode != VIR_DOMAIN_HOSTDEV_MODE_SUBSYS) { + virReportError(VIR_ERR_CONFIG_UNSUPPORTED, + _("hostdev mode '%s' not supported"), + virDomainHostdevModeTypeToString(hostdev->mode)); + return -1; + } + + switch (subsys->type) { + case VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_PCI: + return libxlDomainDetachHostPciDevice(priv, vm, hostdev); + + default: + virReportError(VIR_ERR_INTERNAL_ERROR, + _("unexpected hostdev type %d"), subsys->type); + break; + } + + return -1; +} + +static int libxlDomainDetachDeviceLive(libxlDomainObjPrivatePtr priv, virDomainObjPtr vm, virDomainDeviceDefPtr dev) { @@ -3012,6 +3271,10 @@ libxlDomainDetachDeviceLive(libxlDomainObjPrivatePtr priv, virDomainObjPtr vm, ret = libxlDomainDetachDeviceDiskLive(priv, vm, dev); break; + case VIR_DOMAIN_DEVICE_HOSTDEV: + ret = libxlDomainDetachHostDevice(priv, vm, dev); + break; + default: virReportError(VIR_ERR_CONFIG_UNSUPPORTED, _("device type '%s' cannot be detached"), @@ -3022,6 +3285,7 @@ libxlDomainDetachDeviceLive(libxlDomainObjPrivatePtr priv, virDomainObjPtr vm, return ret; } + static int libxlDomainDetachDeviceConfig(virDomainDefPtr vmdef, virDomainDeviceDefPtr dev) { @@ -4182,10 +4446,188 @@ libxlConnectSupportsFeature(virConnectPtr conn, int feature) } } +static int +libxlNodeDeviceGetPciInfo(virNodeDeviceDefPtr def, + unsigned *domain, + unsigned *bus, + unsigned *slot, + unsigned *function) +{ + virNodeDevCapsDefPtr cap; + int ret = -1; + + cap = def->caps; + while (cap) { + if (cap->type == VIR_NODE_DEV_CAP_PCI_DEV) { + *domain = cap->data.pci_dev.domain; + *bus = cap->data.pci_dev.bus; + *slot = cap->data.pci_dev.slot; + *function = cap->data.pci_dev.function; + break; + } + + cap = cap->next; + } + + if (!cap) { + virReportError(VIR_ERR_INVALID_ARG, + _("device %s is not a PCI device"), def->name); + goto out; + } + + ret = 0; +out: + return ret; +} + +static int +libxlNodeDeviceDetachFlags(virNodeDevicePtr dev, + const char *driverName, + unsigned int flags) +{ + virPCIDevicePtr pci = NULL; + unsigned domain = 0, bus = 0, slot = 0, function = 0; + int ret = -1; + virNodeDeviceDefPtr def = NULL; + char *xml = NULL; + virHostdevManagerPtr hostdev_mgr; + + virCheckFlags(0, -1); + + xml = virNodeDeviceGetXMLDesc(dev, 0); + if (!xml) + goto cleanup; + + def = virNodeDeviceDefParseString(xml, EXISTING_DEVICE, NULL); + if (!def) + goto cleanup; + + if (virNodeDeviceDetachFlagsEnsureACL(dev->conn, def) < 0) + goto cleanup; + + if (libxlNodeDeviceGetPciInfo(def, &domain, &bus, &slot, &function) < 0) + goto cleanup; + + pci = virPCIDeviceNew(domain, bus, slot, function); + if (!pci) + goto cleanup; + + if (!driverName || STREQ(driverName, "xen")) { + if (virPCIDeviceSetStubDriver(pci, "pciback") < 0) + goto cleanup; + } else { + virReportError(VIR_ERR_INVALID_ARG, + _("unsupported driver name '%s'"), driverName); + goto cleanup; + } + + hostdev_mgr = virHostdevManagerGetDefault(); + if (hostdev_mgr == NULL || + virHostdevPciNodeDeviceDetach(hostdev_mgr, pci) < 0) + goto cleanup; + + ret = 0; +cleanup: + virPCIDeviceFree(pci); + virNodeDeviceDefFree(def); + VIR_FREE(xml); + return ret; +} + +static int +libxlNodeDeviceDettach(virNodeDevicePtr dev) +{ + return libxlNodeDeviceDetachFlags(dev, NULL, 0); +} + +static int +libxlNodeDeviceReAttach(virNodeDevicePtr dev) +{ + virPCIDevicePtr pci = NULL; + unsigned domain = 0, bus = 0, slot = 0, function = 0; + int ret = -1; + virNodeDeviceDefPtr def = NULL; + char *xml = NULL; + virHostdevManagerPtr hostdev_mgr; + + xml = virNodeDeviceGetXMLDesc(dev, 0); + if (!xml) + goto cleanup; + + def = virNodeDeviceDefParseString(xml, EXISTING_DEVICE, NULL); + if (!def) + goto cleanup; + + if (virNodeDeviceReAttachEnsureACL(dev->conn, def) < 0) + goto cleanup; + + if (libxlNodeDeviceGetPciInfo(def, &domain, &bus, &slot, &function) < 0) + goto cleanup; + + pci = virPCIDeviceNew(domain, bus, slot, function); + if (!pci) + goto cleanup; + + hostdev_mgr = virHostdevManagerGetDefault(); + if (hostdev_mgr == NULL || + virHostdevPciNodeDeviceReAttach(hostdev_mgr, pci) < 0) + goto out; + + ret = 0; +out: + virPCIDeviceFree(pci); +cleanup: + virNodeDeviceDefFree(def); + VIR_FREE(xml); + return ret; +} + +static int +libxlNodeDeviceReset(virNodeDevicePtr dev) +{ + virPCIDevicePtr pci; + unsigned domain = 0, bus = 0, slot = 0, function = 0; + int ret = -1; + virNodeDeviceDefPtr def = NULL; + char *xml = NULL; + virHostdevManagerPtr hostdev_mgr; + + xml = virNodeDeviceGetXMLDesc(dev, 0); + if (!xml) + goto cleanup; + + def = virNodeDeviceDefParseString(xml, EXISTING_DEVICE, NULL); + if (!def) + goto cleanup; + + if (virNodeDeviceResetEnsureACL(dev->conn, def) < 0) + goto cleanup; + + if (libxlNodeDeviceGetPciInfo(def, &domain, &bus, &slot, &function) < 0) + goto cleanup; + + pci = virPCIDeviceNew(domain, bus, slot, function); + if (!pci) + goto cleanup; + + hostdev_mgr = virHostdevManagerGetDefault(); + if (hostdev_mgr == NULL || + virHostdevPciNodeDeviceReset(hostdev_mgr, pci) < 0) + goto out; + + ret = 0; +out: + virPCIDeviceFree(pci); +cleanup: + virNodeDeviceDefFree(def); + VIR_FREE(xml); + return ret; +} + static virDriver libxlDriver = { .no = VIR_DRV_LIBXL, - .name = "xenlight", + .name = LIBXL_DRIVER_NAME, .connectOpen = libxlConnectOpen, /* 0.9.0 */ .connectClose = libxlConnectClose, /* 0.9.0 */ .connectGetType = libxlConnectGetType, /* 0.9.0 */ @@ -4266,6 +4708,10 @@ static virDriver libxlDriver = { .connectDomainEventDeregisterAny = libxlConnectDomainEventDeregisterAny, /* 0.9.0 */ .connectIsAlive = libxlConnectIsAlive, /* 0.9.8 */ .connectSupportsFeature = libxlConnectSupportsFeature, /* 1.1.1 */ + .nodeDeviceDettach = libxlNodeDeviceDettach, /* 1.1.3 */ + .nodeDeviceDetachFlags = libxlNodeDeviceDetachFlags, /* 1.1.3 */ + .nodeDeviceReAttach = libxlNodeDeviceReAttach, /* 1.1.3 */ + .nodeDeviceReset = libxlNodeDeviceReset, /* 1.1.3 */ }; static virStateDriver libxlStateDriver = { -- 1.6.0.2

Change qemu driver to use hostdev common library instead of APIs in qemu_hostdev.[ch] Signed-off-by: Chunyan Liu <cyliu@suse.com> --- po/POTFILES.in | 1 - src/Makefile.am | 1 - src/qemu/qemu_command.c | 1 - src/qemu/qemu_conf.h | 9 +- src/qemu/qemu_driver.c | 77 +-- src/qemu/qemu_hostdev.c | 1453 ----------------------------------------------- src/qemu/qemu_hostdev.h | 74 --- src/qemu/qemu_hotplug.c | 127 ++--- src/qemu/qemu_process.c | 40 +- 9 files changed, 102 insertions(+), 1681 deletions(-) delete mode 100644 src/qemu/qemu_hostdev.c delete mode 100644 src/qemu/qemu_hostdev.h diff --git a/po/POTFILES.in b/po/POTFILES.in index 384204b..272fbe9 100644 --- a/po/POTFILES.in +++ b/po/POTFILES.in @@ -99,7 +99,6 @@ src/qemu/qemu_command.c src/qemu/qemu_conf.c src/qemu/qemu_domain.c src/qemu/qemu_driver.c -src/qemu/qemu_hostdev.c src/qemu/qemu_hotplug.c src/qemu/qemu_migration.c src/qemu/qemu_monitor.c diff --git a/src/Makefile.am b/src/Makefile.am index c2dc46f..ba6a661 100644 --- a/src/Makefile.am +++ b/src/Makefile.am @@ -664,7 +664,6 @@ QEMU_DRIVER_SOURCES = \ qemu/qemu_command.c qemu/qemu_command.h \ qemu/qemu_domain.c qemu/qemu_domain.h \ qemu/qemu_cgroup.c qemu/qemu_cgroup.h \ - qemu/qemu_hostdev.c qemu/qemu_hostdev.h \ qemu/qemu_hotplug.c qemu/qemu_hotplug.h \ qemu/qemu_hotplugpriv.h \ qemu/qemu_conf.c qemu/qemu_conf.h \ diff --git a/src/qemu/qemu_command.c b/src/qemu/qemu_command.c index 2e3c2df..1c658df 100644 --- a/src/qemu/qemu_command.c +++ b/src/qemu/qemu_command.c @@ -24,7 +24,6 @@ #include <config.h> #include "qemu_command.h" -#include "qemu_hostdev.h" #include "qemu_capabilities.h" #include "qemu_bridge_filter.h" #include "cpu/cpu.h" diff --git a/src/qemu/qemu_conf.h b/src/qemu/qemu_conf.h index f9ff7af..bb38e9e 100644 --- a/src/qemu/qemu_conf.h +++ b/src/qemu/qemu_conf.h @@ -52,6 +52,7 @@ # error "Port me" # endif +# define QEMU_DRIVER_NAME "QEMU" typedef struct _virQEMUDriver virQEMUDriver; typedef virQEMUDriver *virQEMUDriverPtr; @@ -212,14 +213,6 @@ struct _virQEMUDriver { /* Immutable pointer. self-locking APIs */ virSecurityManagerPtr securityManager; - /* Immutable pointers. Requires locks to be held before - * calling APIs. activePciHostdevs must be locked before - * inactivePciHostdevs */ - virPCIDeviceListPtr activePciHostdevs; - virPCIDeviceListPtr inactivePciHostdevs; - virUSBDeviceListPtr activeUsbHostdevs; - virSCSIDeviceListPtr activeScsiHostdevs; - /* Immutable pointer. Unsafe APIs. XXX */ virHashTablePtr sharedDevices; diff --git a/src/qemu/qemu_driver.c b/src/qemu/qemu_driver.c index 9c3daad..2dc0847 100644 --- a/src/qemu/qemu_driver.c +++ b/src/qemu/qemu_driver.c @@ -50,7 +50,6 @@ #include "qemu_capabilities.h" #include "qemu_command.h" #include "qemu_cgroup.h" -#include "qemu_hostdev.h" #include "qemu_hotplug.h" #include "qemu_monitor.h" #include "qemu_bridge_filter.h" @@ -94,11 +93,10 @@ #include "virstring.h" #include "viraccessapicheck.h" #include "viraccessapicheckqemu.h" +#include "virhostdev.h" #define VIR_FROM_THIS VIR_FROM_QEMU -#define QEMU_DRIVER_NAME "QEMU" - #define QEMU_NB_MEM_PARAM 3 #define QEMU_NB_BLOCK_IO_TUNE_PARAM 6 @@ -695,18 +693,6 @@ qemuStateInitialize(bool privileged, if (qemuSecurityInit(qemu_driver) < 0) goto error; - if ((qemu_driver->activePciHostdevs = virPCIDeviceListNew()) == NULL) - goto error; - - if ((qemu_driver->activeUsbHostdevs = virUSBDeviceListNew()) == NULL) - goto error; - - if ((qemu_driver->inactivePciHostdevs = virPCIDeviceListNew()) == NULL) - goto error; - - if ((qemu_driver->activeScsiHostdevs = virSCSIDeviceListNew()) == NULL) - goto error; - if (!(qemu_driver->sharedDevices = virHashCreate(30, qemuSharedDeviceEntryFree))) goto error; @@ -986,10 +972,6 @@ qemuStateCleanup(void) { virNWFilterUnRegisterCallbackDriver(&qemuCallbackDriver); virObjectUnref(qemu_driver->config); - virObjectUnref(qemu_driver->activePciHostdevs); - virObjectUnref(qemu_driver->inactivePciHostdevs); - virObjectUnref(qemu_driver->activeUsbHostdevs); - virObjectUnref(qemu_driver->activeScsiHostdevs); virHashFree(qemu_driver->sharedDevices); virObjectUnref(qemu_driver->caps); virQEMUCapsCacheFree(qemu_driver->qemuCapsCache); @@ -10702,12 +10684,12 @@ qemuNodeDeviceDetachFlags(virNodeDevicePtr dev, const char *driverName, unsigned int flags) { - virQEMUDriverPtr driver = dev->conn->privateData; virPCIDevicePtr pci = NULL; unsigned domain = 0, bus = 0, slot = 0, function = 0; int ret = -1; virNodeDeviceDefPtr def = NULL; char *xml = NULL; + virHostdevManagerPtr hostdev_mgr; virCheckFlags(0, -1); @@ -10741,18 +10723,12 @@ qemuNodeDeviceDetachFlags(virNodeDevicePtr dev, goto cleanup; } - virObjectLock(driver->activePciHostdevs); - virObjectLock(driver->inactivePciHostdevs); - - if (virPCIDeviceDetach(pci, driver->activePciHostdevs, - driver->inactivePciHostdevs) < 0) { - goto out; - } + hostdev_mgr = virHostdevManagerGetDefault(); + if (hostdev_mgr == NULL || + virHostdevPciNodeDeviceDetach(hostdev_mgr, pci) < 0) + goto cleanup; ret = 0; -out: - virObjectUnlock(driver->inactivePciHostdevs); - virObjectUnlock(driver->activePciHostdevs); cleanup: virPCIDeviceFree(pci); virNodeDeviceDefFree(def); @@ -10769,13 +10745,12 @@ qemuNodeDeviceDettach(virNodeDevicePtr dev) static int qemuNodeDeviceReAttach(virNodeDevicePtr dev) { - virQEMUDriverPtr driver = dev->conn->privateData; virPCIDevicePtr pci = NULL; - virPCIDevicePtr other; unsigned domain = 0, bus = 0, slot = 0, function = 0; int ret = -1; virNodeDeviceDefPtr def = NULL; char *xml = NULL; + virHostdevManagerPtr hostdev_mgr; xml = virNodeDeviceGetXMLDesc(dev, 0); if (!xml) @@ -10795,33 +10770,13 @@ qemuNodeDeviceReAttach(virNodeDevicePtr dev) if (!pci) goto cleanup; - virObjectLock(driver->activePciHostdevs); - virObjectLock(driver->inactivePciHostdevs); - other = virPCIDeviceListFind(driver->activePciHostdevs, pci); - if (other) { - const char *other_name = virPCIDeviceGetUsedBy(other); - - if (other_name) - virReportError(VIR_ERR_OPERATION_INVALID, - _("PCI device %s is still in use by domain %s"), - virPCIDeviceGetName(pci), other_name); - else - virReportError(VIR_ERR_OPERATION_INVALID, - _("PCI device %s is still in use"), - virPCIDeviceGetName(pci)); - goto out; - } - - virPCIDeviceReattachInit(pci); - - if (virPCIDeviceReattach(pci, driver->activePciHostdevs, - driver->inactivePciHostdevs) < 0) + hostdev_mgr = virHostdevManagerGetDefault(); + if (hostdev_mgr == NULL || + virHostdevPciNodeDeviceReAttach(hostdev_mgr, pci) < 0) goto out; ret = 0; out: - virObjectUnlock(driver->inactivePciHostdevs); - virObjectUnlock(driver->activePciHostdevs); virPCIDeviceFree(pci); cleanup: virNodeDeviceDefFree(def); @@ -10832,12 +10787,12 @@ cleanup: static int qemuNodeDeviceReset(virNodeDevicePtr dev) { - virQEMUDriverPtr driver = dev->conn->privateData; virPCIDevicePtr pci; unsigned domain = 0, bus = 0, slot = 0, function = 0; int ret = -1; virNodeDeviceDefPtr def = NULL; char *xml = NULL; + virHostdevManagerPtr hostdev_mgr; xml = virNodeDeviceGetXMLDesc(dev, 0); if (!xml) @@ -10857,17 +10812,13 @@ qemuNodeDeviceReset(virNodeDevicePtr dev) if (!pci) goto cleanup; - virObjectLock(driver->activePciHostdevs); - virObjectLock(driver->inactivePciHostdevs); - - if (virPCIDeviceReset(pci, driver->activePciHostdevs, - driver->inactivePciHostdevs) < 0) + hostdev_mgr = virHostdevManagerGetDefault(); + if (hostdev_mgr == NULL || + virHostdevPciNodeDeviceReset(hostdev_mgr, pci) < 0) goto out; ret = 0; out: - virObjectUnlock(driver->inactivePciHostdevs); - virObjectUnlock(driver->activePciHostdevs); virPCIDeviceFree(pci); cleanup: virNodeDeviceDefFree(def); diff --git a/src/qemu/qemu_hostdev.c b/src/qemu/qemu_hostdev.c deleted file mode 100644 index 57ab28c..0000000 --- a/src/qemu/qemu_hostdev.c +++ /dev/null @@ -1,1453 +0,0 @@ -/* - * qemu_hostdev.c: QEMU hostdev management - * - * Copyright (C) 2006-2007, 2009-2013 Red Hat, Inc. - * Copyright (C) 2006 Daniel P. Berrange - * - * This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU Lesser General Public - * License as published by the Free Software Foundation; either - * version 2.1 of the License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * Lesser General Public License for more details. - * - * You should have received a copy of the GNU Lesser General Public - * License along with this library. If not, see - * <http://www.gnu.org/licenses/>. - * - * Author: Daniel P. Berrange <berrange@redhat.com> - */ - -#include <config.h> - -#include <dirent.h> -#include <fcntl.h> -#include <sys/ioctl.h> -#include <errno.h> - -#include "qemu_hostdev.h" -#include "virlog.h" -#include "virerror.h" -#include "viralloc.h" -#include "virpci.h" -#include "virusb.h" -#include "virscsi.h" -#include "virnetdev.h" -#include "virfile.h" - -#define VIR_FROM_THIS VIR_FROM_QEMU - -static virPCIDeviceListPtr -qemuGetPciHostDeviceList(virDomainHostdevDefPtr *hostdevs, int nhostdevs) -{ - virPCIDeviceListPtr list; - size_t i; - - if (!(list = virPCIDeviceListNew())) - return NULL; - - for (i = 0; i < nhostdevs; i++) { - virDomainHostdevDefPtr hostdev = hostdevs[i]; - virPCIDevicePtr dev; - - if (hostdev->mode != VIR_DOMAIN_HOSTDEV_MODE_SUBSYS) - continue; - if (hostdev->source.subsys.type != VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_PCI) - continue; - - dev = virPCIDeviceNew(hostdev->source.subsys.u.pci.addr.domain, - hostdev->source.subsys.u.pci.addr.bus, - hostdev->source.subsys.u.pci.addr.slot, - hostdev->source.subsys.u.pci.addr.function); - if (!dev) { - virObjectUnref(list); - return NULL; - } - - if (virPCIDeviceListAdd(list, dev) < 0) { - virPCIDeviceFree(dev); - virObjectUnref(list); - return NULL; - } - - virPCIDeviceSetManaged(dev, hostdev->managed); - if (hostdev->source.subsys.u.pci.backend - == VIR_DOMAIN_HOSTDEV_PCI_BACKEND_VFIO) { - if (virPCIDeviceSetStubDriver(dev, "vfio-pci") < 0) { - virObjectUnref(list); - return NULL; - } - } else { - if (virPCIDeviceSetStubDriver(dev, "pci-stub") < 0) { - virObjectUnref(list); - return NULL; - } - } - } - - return list; -} - - -/* - * qemuGetActivePciHostDeviceList - make a new list with a *copy* of - * every virPCIDevice object that is found on the activePciHostdevs - * list *and* is in the hostdev list for this domain. - * - * Return the new list, or NULL if there was a failure. - * - * Pre-condition: driver->activePciHostdevs is locked - */ -static virPCIDeviceListPtr -qemuGetActivePciHostDeviceList(virQEMUDriverPtr driver, - virDomainHostdevDefPtr *hostdevs, - int nhostdevs) -{ - virPCIDeviceListPtr list; - size_t i; - - if (!(list = virPCIDeviceListNew())) - return NULL; - - for (i = 0; i < nhostdevs; i++) { - virDomainHostdevDefPtr hostdev = hostdevs[i]; - virDevicePCIAddressPtr addr; - virPCIDevicePtr activeDev; - - if (hostdev->mode != VIR_DOMAIN_HOSTDEV_MODE_SUBSYS) - continue; - if (hostdev->source.subsys.type != VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_PCI) - continue; - - addr = &hostdev->source.subsys.u.pci.addr; - activeDev = virPCIDeviceListFindByIDs(driver->activePciHostdevs, - addr->domain, addr->bus, - addr->slot, addr->function); - if (activeDev && virPCIDeviceListAddCopy(list, activeDev) < 0) { - virObjectUnref(list); - return NULL; - } - } - - return list; -} - - -int -qemuUpdateActivePciHostdevs(virQEMUDriverPtr driver, - virDomainDefPtr def) -{ - virDomainHostdevDefPtr hostdev = NULL; - virPCIDevicePtr dev = NULL; - size_t i; - int ret = -1; - - if (!def->nhostdevs) - return 0; - - virObjectLock(driver->activePciHostdevs); - virObjectLock(driver->inactivePciHostdevs); - - for (i = 0; i < def->nhostdevs; i++) { - hostdev = def->hostdevs[i]; - - if (hostdev->mode != VIR_DOMAIN_HOSTDEV_MODE_SUBSYS) - continue; - if (hostdev->source.subsys.type != VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_PCI) - continue; - - dev = virPCIDeviceNew(hostdev->source.subsys.u.pci.addr.domain, - hostdev->source.subsys.u.pci.addr.bus, - hostdev->source.subsys.u.pci.addr.slot, - hostdev->source.subsys.u.pci.addr.function); - - if (!dev) - goto cleanup; - - virPCIDeviceSetManaged(dev, hostdev->managed); - if (hostdev->source.subsys.u.pci.backend - == VIR_DOMAIN_HOSTDEV_PCI_BACKEND_VFIO) { - if (virPCIDeviceSetStubDriver(dev, "vfio-pci") < 0) - goto cleanup; - } else { - if (virPCIDeviceSetStubDriver(dev, "pci-stub") < 0) - goto cleanup; - - } - virPCIDeviceSetUsedBy(dev, def->name); - - /* Setup the original states for the PCI device */ - virPCIDeviceSetUnbindFromStub(dev, hostdev->origstates.states.pci.unbind_from_stub); - virPCIDeviceSetRemoveSlot(dev, hostdev->origstates.states.pci.remove_slot); - virPCIDeviceSetReprobe(dev, hostdev->origstates.states.pci.reprobe); - - if (virPCIDeviceListAdd(driver->activePciHostdevs, dev) < 0) - goto cleanup; - dev = NULL; - } - - ret = 0; -cleanup: - virPCIDeviceFree(dev); - virObjectUnlock(driver->activePciHostdevs); - virObjectUnlock(driver->inactivePciHostdevs); - return ret; -} - - -int -qemuUpdateActiveUsbHostdevs(virQEMUDriverPtr driver, - virDomainDefPtr def) -{ - virDomainHostdevDefPtr hostdev = NULL; - size_t i; - int ret = -1; - - if (!def->nhostdevs) - return 0; - - virObjectLock(driver->activeUsbHostdevs); - for (i = 0; i < def->nhostdevs; i++) { - virUSBDevicePtr usb = NULL; - hostdev = def->hostdevs[i]; - - if (hostdev->mode != VIR_DOMAIN_HOSTDEV_MODE_SUBSYS) - continue; - if (hostdev->source.subsys.type != VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_USB) - continue; - - usb = virUSBDeviceNew(hostdev->source.subsys.u.usb.bus, - hostdev->source.subsys.u.usb.device, - NULL); - if (!usb) { - VIR_WARN("Unable to reattach USB device %03d.%03d on domain %s", - hostdev->source.subsys.u.usb.bus, - hostdev->source.subsys.u.usb.device, - def->name); - continue; - } - - virUSBDeviceSetUsedBy(usb, def->name); - - if (virUSBDeviceListAdd(driver->activeUsbHostdevs, usb) < 0) { - virUSBDeviceFree(usb); - goto cleanup; - } - } - ret = 0; -cleanup: - virObjectUnlock(driver->activeUsbHostdevs); - return ret; -} - -int -qemuUpdateActiveScsiHostdevs(virQEMUDriverPtr driver, - virDomainDefPtr def) -{ - virDomainHostdevDefPtr hostdev = NULL; - size_t i; - int ret = -1; - - if (!def->nhostdevs) - return 0; - - virObjectLock(driver->activeScsiHostdevs); - for (i = 0; i < def->nhostdevs; i++) { - virSCSIDevicePtr scsi = NULL; - hostdev = def->hostdevs[i]; - - if (hostdev->mode != VIR_DOMAIN_HOSTDEV_MODE_SUBSYS || - hostdev->source.subsys.type != VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_SCSI) - continue; - - if (!(scsi = virSCSIDeviceNew(hostdev->source.subsys.u.scsi.adapter, - hostdev->source.subsys.u.scsi.bus, - hostdev->source.subsys.u.scsi.target, - hostdev->source.subsys.u.scsi.unit, - hostdev->readonly))) - goto cleanup; - - virSCSIDeviceSetUsedBy(scsi, def->name); - - if (virSCSIDeviceListAdd(driver->activeScsiHostdevs, scsi) < 0) { - virSCSIDeviceFree(scsi); - goto cleanup; - } - } - ret = 0; - -cleanup: - virObjectUnlock(driver->activeScsiHostdevs); - return ret; -} - - -static int -qemuDomainHostdevPciSysfsPath(virDomainHostdevDefPtr hostdev, - char **sysfs_path) -{ - virPCIDeviceAddress config_address; - - config_address.domain = hostdev->source.subsys.u.pci.addr.domain; - config_address.bus = hostdev->source.subsys.u.pci.addr.bus; - config_address.slot = hostdev->source.subsys.u.pci.addr.slot; - config_address.function = hostdev->source.subsys.u.pci.addr.function; - - return virPCIDeviceAddressGetSysfsFile(&config_address, sysfs_path); -} - - -int -qemuDomainHostdevIsVirtualFunction(virDomainHostdevDefPtr hostdev) -{ - char *sysfs_path = NULL; - int ret = -1; - - if (qemuDomainHostdevPciSysfsPath(hostdev, &sysfs_path) < 0) - return ret; - - ret = virPCIIsVirtualFunction(sysfs_path); - - VIR_FREE(sysfs_path); - - return ret; -} - - -static int -qemuDomainHostdevNetDevice(virDomainHostdevDefPtr hostdev, char **linkdev, - int *vf) -{ - int ret = -1; - char *sysfs_path = NULL; - - if (qemuDomainHostdevPciSysfsPath(hostdev, &sysfs_path) < 0) - return ret; - - if (virPCIIsVirtualFunction(sysfs_path) == 1) { - if (virPCIGetVirtualFunctionInfo(sysfs_path, linkdev, - vf) < 0) - goto cleanup; - } else { - if (virPCIGetNetName(sysfs_path, linkdev) < 0) - goto cleanup; - *vf = -1; - } - - ret = 0; - -cleanup: - VIR_FREE(sysfs_path); - - return ret; -} - - -static int -qemuDomainHostdevNetConfigVirtPortProfile(const char *linkdev, int vf, - virNetDevVPortProfilePtr virtPort, - const virMacAddr *macaddr, - const unsigned char *uuid, - bool associate) -{ - int ret = -1; - - if (!virtPort) - return ret; - - switch (virtPort->virtPortType) { - case VIR_NETDEV_VPORT_PROFILE_NONE: - case VIR_NETDEV_VPORT_PROFILE_OPENVSWITCH: - case VIR_NETDEV_VPORT_PROFILE_8021QBG: - case VIR_NETDEV_VPORT_PROFILE_LAST: - virReportError(VIR_ERR_CONFIG_UNSUPPORTED, - _("virtualport type %s is " - "currently not supported on interfaces of type " - "hostdev"), - virNetDevVPortTypeToString(virtPort->virtPortType)); - break; - - case VIR_NETDEV_VPORT_PROFILE_8021QBH: - if (associate) - ret = virNetDevVPortProfileAssociate(NULL, virtPort, macaddr, - linkdev, vf, uuid, - VIR_NETDEV_VPORT_PROFILE_OP_CREATE, false); - else - ret = virNetDevVPortProfileDisassociate(NULL, virtPort, - macaddr, linkdev, vf, - VIR_NETDEV_VPORT_PROFILE_OP_DESTROY); - break; - } - - return ret; -} - - -int -qemuDomainHostdevNetConfigReplace(virDomainHostdevDefPtr hostdev, - const unsigned char *uuid, - char *stateDir) -{ - char *linkdev = NULL; - virNetDevVlanPtr vlan; - virNetDevVPortProfilePtr virtPort; - int ret = -1; - int vf = -1; - int vlanid = -1; - bool port_profile_associate = true; - int isvf; - - isvf = qemuDomainHostdevIsVirtualFunction(hostdev); - if (isvf <= 0) { - virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s", - _("Interface type hostdev is currently supported on" - " SR-IOV Virtual Functions only")); - return ret; - } - - if (qemuDomainHostdevNetDevice(hostdev, &linkdev, &vf) < 0) - return ret; - - vlan = virDomainNetGetActualVlan(hostdev->parent.data.net); - virtPort = virDomainNetGetActualVirtPortProfile( - hostdev->parent.data.net); - if (virtPort) { - if (vlan) { - virReportError(VIR_ERR_CONFIG_UNSUPPORTED, - _("direct setting of the vlan tag is not allowed " - "for hostdev devices using %s mode"), - virNetDevVPortTypeToString(virtPort->virtPortType)); - goto cleanup; - } - ret = qemuDomainHostdevNetConfigVirtPortProfile(linkdev, vf, - virtPort, &hostdev->parent.data.net->mac, uuid, - port_profile_associate); - } else { - /* Set only mac and vlan */ - if (vlan) { - if (vlan->nTags != 1 || vlan->trunk) { - virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s", - _("vlan trunking is not supported " - "by SR-IOV network devices")); - goto cleanup; - } - if (vf == -1) { - virReportError(VIR_ERR_CONFIG_UNSUPPORTED, - _("vlan can only be set for SR-IOV VFs, but " - "%s is not a VF"), linkdev); - goto cleanup; - } - vlanid = vlan->tag[0]; - } else if (vf >= 0) { - vlanid = 0; /* assure any current vlan tag is reset */ - } - - ret = virNetDevReplaceNetConfig(linkdev, vf, - &hostdev->parent.data.net->mac, - vlanid, stateDir); - } -cleanup: - VIR_FREE(linkdev); - return ret; -} - - -int -qemuDomainHostdevNetConfigRestore(virDomainHostdevDefPtr hostdev, - char *stateDir) -{ - char *linkdev = NULL; - virNetDevVPortProfilePtr virtPort; - int ret = -1; - int vf = -1; - bool port_profile_associate = false; - int isvf; - - /* This is only needed for PCI devices that have been defined - * using <interface type='hostdev'>. For all others, it is a NOP. - */ - if (hostdev->mode != VIR_DOMAIN_HOSTDEV_MODE_SUBSYS || - hostdev->source.subsys.type != VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_PCI || - hostdev->parent.type != VIR_DOMAIN_DEVICE_NET || - !hostdev->parent.data.net) - return 0; - - isvf = qemuDomainHostdevIsVirtualFunction(hostdev); - if (isvf <= 0) { - virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s", - _("Interface type hostdev is currently supported on" - " SR-IOV Virtual Functions only")); - return ret; - } - - if (qemuDomainHostdevNetDevice(hostdev, &linkdev, &vf) < 0) - return ret; - - virtPort = virDomainNetGetActualVirtPortProfile( - hostdev->parent.data.net); - if (virtPort) - ret = qemuDomainHostdevNetConfigVirtPortProfile(linkdev, vf, virtPort, - &hostdev->parent.data.net->mac, NULL, - port_profile_associate); - else - ret = virNetDevRestoreNetConfig(linkdev, vf, stateDir); - - VIR_FREE(linkdev); - - return ret; -} - - -static bool -qemuHostdevHostSupportsPassthroughVFIO(void) -{ - DIR *iommuDir = NULL; - struct dirent *iommuGroup = NULL; - bool ret = false; - - /* condition 1 - /sys/kernel/iommu_groups/ contains entries */ - if (!(iommuDir = opendir("/sys/kernel/iommu_groups/"))) - goto cleanup; - - while ((iommuGroup = readdir(iommuDir))) { - /* skip ./ ../ */ - if (STRPREFIX(iommuGroup->d_name, ".")) - continue; - - /* assume we found a group */ - break; - } - - if (!iommuGroup) - goto cleanup; - /* okay, iommu is on and recognizes groups */ - - /* condition 2 - /dev/vfio/vfio exists */ - if (!virFileExists("/dev/vfio/vfio")) - goto cleanup; - - ret = true; - -cleanup: - if (iommuDir) - closedir(iommuDir); - - return ret; -} - - -#if HAVE_LINUX_KVM_H -# include <linux/kvm.h> -static bool -qemuHostdevHostSupportsPassthroughLegacy(void) -{ - int kvmfd = -1; - bool ret = false; - - if ((kvmfd = open("/dev/kvm", O_RDONLY)) < 0) - goto cleanup; - -# ifdef KVM_CAP_IOMMU - if ((ioctl(kvmfd, KVM_CHECK_EXTENSION, KVM_CAP_IOMMU)) <= 0) - goto cleanup; - - ret = true; -# endif - -cleanup: - VIR_FORCE_CLOSE(kvmfd); - - return ret; -} -#else -static bool -qemuHostdevHostSupportsPassthroughLegacy(void) -{ - return false; -} -#endif - - -static bool -qemuPrepareHostdevPCICheckSupport(virDomainHostdevDefPtr *hostdevs, - size_t nhostdevs, - virQEMUCapsPtr qemuCaps) -{ - bool supportsPassthroughKVM = qemuHostdevHostSupportsPassthroughLegacy(); - bool supportsPassthroughVFIO = qemuHostdevHostSupportsPassthroughVFIO(); - size_t i; - - /* assign defaults for hostdev passthrough */ - for (i = 0; i < nhostdevs; i++) { - virDomainHostdevDefPtr hostdev = hostdevs[i]; - int *backend = &hostdev->source.subsys.u.pci.backend; - - if (hostdev->mode != VIR_DOMAIN_HOSTDEV_MODE_SUBSYS) - continue; - if (hostdev->source.subsys.type != VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_PCI) - continue; - - switch ((virDomainHostdevSubsysPciBackendType) *backend) { - case VIR_DOMAIN_HOSTDEV_PCI_BACKEND_DEFAULT: - if (supportsPassthroughVFIO && - virQEMUCapsGet(qemuCaps, QEMU_CAPS_DEVICE_VFIO_PCI)) { - *backend = VIR_DOMAIN_HOSTDEV_PCI_BACKEND_VFIO; - } else if (supportsPassthroughKVM && - (virQEMUCapsGet(qemuCaps, QEMU_CAPS_PCIDEVICE) || - virQEMUCapsGet(qemuCaps, QEMU_CAPS_DEVICE))) { - *backend = VIR_DOMAIN_HOSTDEV_PCI_BACKEND_KVM; - } else { - virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s", - _("host doesn't support passthrough of " - "host PCI devices")); - return false; - } - - break; - - case VIR_DOMAIN_HOSTDEV_PCI_BACKEND_VFIO: - if (!supportsPassthroughVFIO) { - virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s", - _("host doesn't support VFIO PCI passthrough")); - return false; - } - break; - - case VIR_DOMAIN_HOSTDEV_PCI_BACKEND_KVM: - if (!supportsPassthroughKVM) { - virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s", - _("host doesn't support legacy PCI passthrough")); - return false; - } - - break; - - case VIR_DOMAIN_HOSTDEV_PCI_BACKEND_TYPE_LAST: - break; - } - } - - return true; -} - - -int -qemuPrepareHostdevPCIDevices(virQEMUDriverPtr driver, - const char *name, - const unsigned char *uuid, - virDomainHostdevDefPtr *hostdevs, - int nhostdevs, - virQEMUCapsPtr qemuCaps) -{ - virPCIDeviceListPtr pcidevs = NULL; - int last_processed_hostdev_vf = -1; - size_t i; - int ret = -1; - virQEMUDriverConfigPtr cfg = virQEMUDriverGetConfig(driver); - - if (!qemuPrepareHostdevPCICheckSupport(hostdevs, nhostdevs, qemuCaps)) - goto cleanup; - - virObjectLock(driver->activePciHostdevs); - virObjectLock(driver->inactivePciHostdevs); - - if (!(pcidevs = qemuGetPciHostDeviceList(hostdevs, nhostdevs))) - goto cleanup; - - /* We have to use 9 loops here. *All* devices must - * be detached before we reset any of them, because - * in some cases you have to reset the whole PCI, - * which impacts all devices on it. Also, all devices - * must be reset before being marked as active. - */ - - /* Loop 1: validate that non-managed device isn't in use, eg - * by checking that device is either un-bound, or bound - * to pci-stub.ko - */ - - for (i = 0; i < virPCIDeviceListCount(pcidevs); i++) { - virPCIDevicePtr dev = virPCIDeviceListGet(pcidevs, i); - virPCIDevicePtr other; - - if (!virPCIDeviceIsAssignable(dev, !cfg->relaxedACS)) { - virReportError(VIR_ERR_OPERATION_INVALID, - _("PCI device %s is not assignable"), - virPCIDeviceGetName(dev)); - goto cleanup; - } - /* The device is in use by other active domain if - * the dev is in list driver->activePciHostdevs. - */ - if ((other = virPCIDeviceListFind(driver->activePciHostdevs, dev))) { - const char *other_name = virPCIDeviceGetUsedBy(other); - - if (other_name) - virReportError(VIR_ERR_OPERATION_INVALID, - _("PCI device %s is in use by domain %s"), - virPCIDeviceGetName(dev), other_name); - else - virReportError(VIR_ERR_OPERATION_INVALID, - _("PCI device %s is already in use"), - virPCIDeviceGetName(dev)); - goto cleanup; - } - } - - /* Loop 2: detach managed devices (i.e. bind to appropriate stub driver) */ - for (i = 0; i < virPCIDeviceListCount(pcidevs); i++) { - virPCIDevicePtr dev = virPCIDeviceListGet(pcidevs, i); - if (virPCIDeviceGetManaged(dev) && - virPCIDeviceDetach(dev, driver->activePciHostdevs, NULL) < 0) - goto reattachdevs; - } - - /* Loop 3: Now that all the PCI hostdevs have been detached, we - * can safely reset them */ - for (i = 0; i < virPCIDeviceListCount(pcidevs); i++) { - virPCIDevicePtr dev = virPCIDeviceListGet(pcidevs, i); - - if (virPCIDeviceReset(dev, driver->activePciHostdevs, - driver->inactivePciHostdevs) < 0) - goto reattachdevs; - } - - /* Loop 4: For SRIOV network devices, Now that we have detached the - * the network device, set the netdev config */ - for (i = 0; i < nhostdevs; i++) { - virDomainHostdevDefPtr hostdev = hostdevs[i]; - if (hostdev->mode != VIR_DOMAIN_HOSTDEV_MODE_SUBSYS) - continue; - if (hostdev->source.subsys.type != VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_PCI) - continue; - if (hostdev->parent.type == VIR_DOMAIN_DEVICE_NET && - hostdev->parent.data.net) { - if (qemuDomainHostdevNetConfigReplace(hostdev, uuid, - cfg->stateDir) < 0) { - goto resetvfnetconfig; - } - } - last_processed_hostdev_vf = i; - } - - /* Loop 5: Now mark all the devices as active */ - for (i = 0; i < virPCIDeviceListCount(pcidevs); i++) { - virPCIDevicePtr dev = virPCIDeviceListGet(pcidevs, i); - if (virPCIDeviceListAdd(driver->activePciHostdevs, dev) < 0) - goto inactivedevs; - } - - /* Loop 6: Now remove the devices from inactive list. */ - for (i = 0; i < virPCIDeviceListCount(pcidevs); i++) { - virPCIDevicePtr dev = virPCIDeviceListGet(pcidevs, i); - virPCIDeviceListDel(driver->inactivePciHostdevs, dev); - } - - /* Loop 7: Now set the used_by_domain of the device in - * driver->activePciHostdevs as domain name. - */ - for (i = 0; i < virPCIDeviceListCount(pcidevs); i++) { - virPCIDevicePtr dev, activeDev; - - dev = virPCIDeviceListGet(pcidevs, i); - activeDev = virPCIDeviceListFind(driver->activePciHostdevs, dev); - - if (activeDev) - virPCIDeviceSetUsedBy(activeDev, name); - } - - /* Loop 8: Now set the original states for hostdev def */ - for (i = 0; i < nhostdevs; i++) { - virPCIDevicePtr dev; - virPCIDevicePtr pcidev; - virDomainHostdevDefPtr hostdev = hostdevs[i]; - - if (hostdev->mode != VIR_DOMAIN_HOSTDEV_MODE_SUBSYS) - continue; - if (hostdev->source.subsys.type != VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_PCI) - continue; - - dev = virPCIDeviceNew(hostdev->source.subsys.u.pci.addr.domain, - hostdev->source.subsys.u.pci.addr.bus, - hostdev->source.subsys.u.pci.addr.slot, - hostdev->source.subsys.u.pci.addr.function); - - /* original states "unbind_from_stub", "remove_slot", - * "reprobe" were already set by pciDettachDevice in - * loop 2. - */ - if ((pcidev = virPCIDeviceListFind(pcidevs, dev))) { - hostdev->origstates.states.pci.unbind_from_stub = - virPCIDeviceGetUnbindFromStub(pcidev); - hostdev->origstates.states.pci.remove_slot = - virPCIDeviceGetRemoveSlot(pcidev); - hostdev->origstates.states.pci.reprobe = - virPCIDeviceGetReprobe(pcidev); - } - - virPCIDeviceFree(dev); - } - - /* Loop 9: Now steal all the devices from pcidevs */ - while (virPCIDeviceListCount(pcidevs) > 0) - virPCIDeviceListStealIndex(pcidevs, 0); - - ret = 0; - goto cleanup; - -inactivedevs: - /* Only steal all the devices from driver->activePciHostdevs. We will - * free them in virObjectUnref(). - */ - for (i = 0; i < virPCIDeviceListCount(pcidevs); i++) { - virPCIDevicePtr dev = virPCIDeviceListGet(pcidevs, i); - virPCIDeviceListSteal(driver->activePciHostdevs, dev); - } - -resetvfnetconfig: - for (i = 0; - last_processed_hostdev_vf != -1 && i < last_processed_hostdev_vf; i++) - qemuDomainHostdevNetConfigRestore(hostdevs[i], cfg->stateDir); - -reattachdevs: - for (i = 0; i < virPCIDeviceListCount(pcidevs); i++) { - virPCIDevicePtr dev = virPCIDeviceListGet(pcidevs, i); - - /* NB: This doesn't actually re-bind to original driver, just - * unbinds from the stub driver - */ - virPCIDeviceReattach(dev, driver->activePciHostdevs, NULL); - } - -cleanup: - virObjectUnlock(driver->activePciHostdevs); - virObjectUnlock(driver->inactivePciHostdevs); - virObjectUnref(pcidevs); - virObjectUnref(cfg); - return ret; -} - - -int -qemuPrepareHostdevUSBDevices(virQEMUDriverPtr driver, - const char *name, - virUSBDeviceListPtr list) -{ - size_t i, j; - unsigned int count; - virUSBDevicePtr tmp; - - virObjectLock(driver->activeUsbHostdevs); - count = virUSBDeviceListCount(list); - - for (i = 0; i < count; i++) { - virUSBDevicePtr usb = virUSBDeviceListGet(list, i); - if ((tmp = virUSBDeviceListFind(driver->activeUsbHostdevs, usb))) { - const char *other_name = virUSBDeviceGetUsedBy(tmp); - - if (other_name) - virReportError(VIR_ERR_OPERATION_INVALID, - _("USB device %s is in use by domain %s"), - virUSBDeviceGetName(tmp), other_name); - else - virReportError(VIR_ERR_OPERATION_INVALID, - _("USB device %s is already in use"), - virUSBDeviceGetName(tmp)); - goto error; - } - - virUSBDeviceSetUsedBy(usb, name); - VIR_DEBUG("Adding %03d.%03d dom=%s to activeUsbHostdevs", - virUSBDeviceGetBus(usb), virUSBDeviceGetDevno(usb), name); - /* - * The caller is responsible to steal these usb devices - * from the virUSBDeviceList that passed in on success, - * perform rollback on failure. - */ - if (virUSBDeviceListAdd(driver->activeUsbHostdevs, usb) < 0) - goto error; - } - - virObjectUnlock(driver->activeUsbHostdevs); - return 0; - -error: - for (j = 0; j < i; j++) { - tmp = virUSBDeviceListGet(list, i); - virUSBDeviceListSteal(driver->activeUsbHostdevs, tmp); - } - virObjectUnlock(driver->activeUsbHostdevs); - return -1; -} - - -int -qemuFindHostdevUSBDevice(virDomainHostdevDefPtr hostdev, - bool mandatory, - virUSBDevicePtr *usb) -{ - unsigned vendor = hostdev->source.subsys.u.usb.vendor; - unsigned product = hostdev->source.subsys.u.usb.product; - unsigned bus = hostdev->source.subsys.u.usb.bus; - unsigned device = hostdev->source.subsys.u.usb.device; - bool autoAddress = hostdev->source.subsys.u.usb.autoAddress; - int rc; - - *usb = NULL; - - if (vendor && bus) { - rc = virUSBDeviceFind(vendor, product, bus, device, - NULL, - autoAddress ? false : mandatory, - usb); - if (rc < 0) { - return -1; - } else if (!autoAddress) { - goto out; - } else { - VIR_INFO("USB device %x:%x could not be found at previous" - " address (bus:%u device:%u)", - vendor, product, bus, device); - } - } - - /* When vendor is specified, its USB address is either unspecified or the - * device could not be found at the USB device where it had been - * automatically found before. - */ - if (vendor) { - virUSBDeviceListPtr devs; - - rc = virUSBDeviceFindByVendor(vendor, product, NULL, mandatory, &devs); - if (rc < 0) - return -1; - - if (rc == 1) { - *usb = virUSBDeviceListGet(devs, 0); - virUSBDeviceListSteal(devs, *usb); - } - virObjectUnref(devs); - - if (rc == 0) { - goto out; - } else if (rc > 1) { - if (autoAddress) { - virReportError(VIR_ERR_OPERATION_FAILED, - _("Multiple USB devices for %x:%x were found," - " but none of them is at bus:%u device:%u"), - vendor, product, bus, device); - } else { - virReportError(VIR_ERR_OPERATION_FAILED, - _("Multiple USB devices for %x:%x, " - "use <address> to specify one"), - vendor, product); - } - return -1; - } - - hostdev->source.subsys.u.usb.bus = virUSBDeviceGetBus(*usb); - hostdev->source.subsys.u.usb.device = virUSBDeviceGetDevno(*usb); - hostdev->source.subsys.u.usb.autoAddress = true; - - if (autoAddress) { - VIR_INFO("USB device %x:%x found at bus:%u device:%u (moved" - " from bus:%u device:%u)", - vendor, product, - hostdev->source.subsys.u.usb.bus, - hostdev->source.subsys.u.usb.device, - bus, device); - } - } else if (!vendor && bus) { - if (virUSBDeviceFindByBus(bus, device, NULL, mandatory, usb) < 0) - return -1; - } - -out: - if (!*usb) - hostdev->missing = true; - return 0; -} - - -static int -qemuPrepareHostUSBDevices(virQEMUDriverPtr driver, - virDomainDefPtr def, - bool coldBoot) -{ - size_t i; - int ret = -1; - virUSBDeviceListPtr list; - virUSBDevicePtr tmp; - virDomainHostdevDefPtr *hostdevs = def->hostdevs; - int nhostdevs = def->nhostdevs; - - /* To prevent situation where USB device is assigned to two domains - * we need to keep a list of currently assigned USB devices. - * This is done in several loops which cannot be joined into one big - * loop. See qemuPrepareHostdevPCIDevices() - */ - if (!(list = virUSBDeviceListNew())) - goto cleanup; - - /* Loop 1: build temporary list - */ - for (i = 0; i < nhostdevs; i++) { - virDomainHostdevDefPtr hostdev = hostdevs[i]; - bool required = true; - virUSBDevicePtr usb; - - if (hostdev->mode != VIR_DOMAIN_HOSTDEV_MODE_SUBSYS) - continue; - if (hostdev->source.subsys.type != VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_USB) - continue; - - if (hostdev->startupPolicy == VIR_DOMAIN_STARTUP_POLICY_OPTIONAL || - (hostdev->startupPolicy == VIR_DOMAIN_STARTUP_POLICY_REQUISITE && - !coldBoot)) - required = false; - - if (qemuFindHostdevUSBDevice(hostdev, required, &usb) < 0) - goto cleanup; - - if (usb && virUSBDeviceListAdd(list, usb) < 0) { - virUSBDeviceFree(usb); - goto cleanup; - } - } - - /* Mark devices in temporary list as used by @name - * and add them do driver list. However, if something goes - * wrong, perform rollback. - */ - if (qemuPrepareHostdevUSBDevices(driver, def->name, list) < 0) - goto cleanup; - - /* Loop 2: Temporary list was successfully merged with - * driver list, so steal all items to avoid freeing them - * in cleanup label. - */ - while (virUSBDeviceListCount(list) > 0) { - tmp = virUSBDeviceListGet(list, 0); - virUSBDeviceListSteal(list, tmp); - } - - ret = 0; - -cleanup: - virObjectUnref(list); - return ret; -} - - -int -qemuPrepareHostdevSCSIDevices(virQEMUDriverPtr driver, - const char *name, - virDomainHostdevDefPtr *hostdevs, - int nhostdevs) -{ - size_t i, j; - int count; - virSCSIDeviceListPtr list; - virSCSIDevicePtr tmp; - - /* Loop 1: Add the shared scsi host device to shared device - * table. - */ - for (i = 0; i < nhostdevs; i++) { - virDomainDeviceDef dev; - - dev.type = VIR_DOMAIN_DEVICE_HOSTDEV; - dev.data.hostdev = hostdevs[i]; - - if (qemuAddSharedDevice(driver, &dev, name) < 0) - return -1; - - if (qemuSetUnprivSGIO(&dev) < 0) - return -1; - } - - /* To prevent situation where SCSI device is assigned to two domains - * we need to keep a list of currently assigned SCSI devices. - * This is done in several loops which cannot be joined into one big - * loop. See qemuPrepareHostdevPCIDevices() - */ - if (!(list = virSCSIDeviceListNew())) - goto cleanup; - - /* Loop 2: build temporary list */ - for (i = 0; i < nhostdevs; i++) { - virDomainHostdevDefPtr hostdev = hostdevs[i]; - virSCSIDevicePtr scsi; - - if (hostdev->mode != VIR_DOMAIN_HOSTDEV_MODE_SUBSYS || - hostdev->source.subsys.type != VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_SCSI) - continue; - - if (hostdev->managed) { - virReportError(VIR_ERR_XML_ERROR, "%s", - _("SCSI host device doesn't support managed mode")); - goto cleanup; - } - - if (!(scsi = virSCSIDeviceNew(hostdev->source.subsys.u.scsi.adapter, - hostdev->source.subsys.u.scsi.bus, - hostdev->source.subsys.u.scsi.target, - hostdev->source.subsys.u.scsi.unit, - hostdev->readonly))) - goto cleanup; - - if (scsi && virSCSIDeviceListAdd(list, scsi) < 0) { - virSCSIDeviceFree(scsi); - goto cleanup; - } - } - - /* Loop 3: Mark devices in temporary list as used by @name - * and add them to driver list. However, if something goes - * wrong, perform rollback. - */ - virObjectLock(driver->activeScsiHostdevs); - count = virSCSIDeviceListCount(list); - - for (i = 0; i < count; i++) { - virSCSIDevicePtr scsi = virSCSIDeviceListGet(list, i); - if ((tmp = virSCSIDeviceListFind(driver->activeScsiHostdevs, scsi))) { - const char *other_name = virSCSIDeviceGetUsedBy(tmp); - - if (other_name) - virReportError(VIR_ERR_OPERATION_INVALID, - _("SCSI device %s is in use by domain %s"), - virSCSIDeviceGetName(tmp), other_name); - else - virReportError(VIR_ERR_OPERATION_INVALID, - _("SCSI device %s is already in use"), - virSCSIDeviceGetName(tmp)); - goto error; - } - - virSCSIDeviceSetUsedBy(scsi, name); - VIR_DEBUG("Adding %s to activeScsiHostdevs", virSCSIDeviceGetName(scsi)); - - if (virSCSIDeviceListAdd(driver->activeScsiHostdevs, scsi) < 0) - goto error; - } - - virObjectUnlock(driver->activeScsiHostdevs); - - /* Loop 4: Temporary list was successfully merged with - * driver list, so steal all items to avoid freeing them - * when freeing temporary list. - */ - while (virSCSIDeviceListCount(list) > 0) { - tmp = virSCSIDeviceListGet(list, 0); - virSCSIDeviceListSteal(list, tmp); - } - - virObjectUnref(list); - return 0; - -error: - for (j = 0; j < i; j++) { - tmp = virSCSIDeviceListGet(list, i); - virSCSIDeviceListSteal(driver->activeScsiHostdevs, tmp); - } - virObjectUnlock(driver->activeScsiHostdevs); -cleanup: - virObjectUnref(list); - return -1; -} - - -int -qemuPrepareHostDevices(virQEMUDriverPtr driver, - virDomainDefPtr def, - virQEMUCapsPtr qemuCaps, - bool coldBoot) -{ - if (!def->nhostdevs) - return 0; - - if (qemuPrepareHostdevPCIDevices(driver, def->name, def->uuid, - def->hostdevs, def->nhostdevs, - qemuCaps) < 0) - return -1; - - if (qemuPrepareHostUSBDevices(driver, def, coldBoot) < 0) - return -1; - - if (qemuPrepareHostdevSCSIDevices(driver, def->name, - def->hostdevs, def->nhostdevs) < 0) - return -1; - - return 0; -} - - -/* - * Pre-condition: driver->inactivePciHostdevs & driver->activePciHostdevs - * are locked - */ -void -qemuReattachPciDevice(virPCIDevicePtr dev, virQEMUDriverPtr driver) -{ - int retries = 100; - - /* If the device is not managed and was attached to guest - * successfully, it must have been inactive. - */ - if (!virPCIDeviceGetManaged(dev)) { - if (virPCIDeviceListAdd(driver->inactivePciHostdevs, dev) < 0) - virPCIDeviceFree(dev); - return; - } - - while (virPCIDeviceWaitForCleanup(dev, "kvm_assigned_device") - && retries) { - usleep(100*1000); - retries--; - } - - if (virPCIDeviceReattach(dev, driver->activePciHostdevs, - driver->inactivePciHostdevs) < 0) { - virErrorPtr err = virGetLastError(); - VIR_ERROR(_("Failed to re-attach PCI device: %s"), - err ? err->message : _("unknown error")); - virResetError(err); - } - virPCIDeviceFree(dev); -} - - -void -qemuDomainReAttachHostdevDevices(virQEMUDriverPtr driver, - const char *name, - virDomainHostdevDefPtr *hostdevs, - int nhostdevs) -{ - virPCIDeviceListPtr pcidevs; - size_t i; - virQEMUDriverConfigPtr cfg = virQEMUDriverGetConfig(driver); - - virObjectLock(driver->activePciHostdevs); - virObjectLock(driver->inactivePciHostdevs); - - if (!(pcidevs = qemuGetActivePciHostDeviceList(driver, - hostdevs, - nhostdevs))) { - virErrorPtr err = virGetLastError(); - VIR_ERROR(_("Failed to allocate PCI device list: %s"), - err ? err->message : _("unknown error")); - virResetError(err); - goto cleanup; - } - - /* Again 4 loops; mark all devices as inactive before reset - * them and reset all the devices before re-attach. - * Attach mac and port profile parameters to devices - */ - for (i = 0; i < virPCIDeviceListCount(pcidevs); i++) { - virPCIDevicePtr dev = virPCIDeviceListGet(pcidevs, i); - virPCIDevicePtr activeDev = NULL; - - /* delete the copy of the dev from pcidevs if it's used by - * other domain. Or delete it from activePciHostDevs if it had - * been used by this domain. - */ - activeDev = virPCIDeviceListFind(driver->activePciHostdevs, dev); - if (activeDev && - STRNEQ_NULLABLE(name, virPCIDeviceGetUsedBy(activeDev))) { - virPCIDeviceListDel(pcidevs, dev); - continue; - } - - virPCIDeviceListDel(driver->activePciHostdevs, dev); - } - - /* At this point, any device that had been used by the guest is in - * pcidevs, but has been removed from activePciHostdevs. - */ - - /* - * For SRIOV net host devices, unset mac and port profile before - * reset and reattach device - */ - for (i = 0; i < nhostdevs; i++) - qemuDomainHostdevNetConfigRestore(hostdevs[i], cfg->stateDir); - - for (i = 0; i < virPCIDeviceListCount(pcidevs); i++) { - virPCIDevicePtr dev = virPCIDeviceListGet(pcidevs, i); - - if (virPCIDeviceReset(dev, driver->activePciHostdevs, - driver->inactivePciHostdevs) < 0) { - virErrorPtr err = virGetLastError(); - VIR_ERROR(_("Failed to reset PCI device: %s"), - err ? err->message : _("unknown error")); - virResetError(err); - } - } - - while (virPCIDeviceListCount(pcidevs) > 0) { - virPCIDevicePtr dev = virPCIDeviceListStealIndex(pcidevs, 0); - qemuReattachPciDevice(dev, driver); - } - - virObjectUnref(pcidevs); -cleanup: - virObjectUnlock(driver->activePciHostdevs); - virObjectUnlock(driver->inactivePciHostdevs); - virObjectUnref(cfg); -} - - -static void -qemuDomainReAttachHostUsbDevices(virQEMUDriverPtr driver, - const char *name, - virDomainHostdevDefPtr *hostdevs, - int nhostdevs) -{ - size_t i; - - virObjectLock(driver->activeUsbHostdevs); - for (i = 0; i < nhostdevs; i++) { - virDomainHostdevDefPtr hostdev = hostdevs[i]; - virUSBDevicePtr usb, tmp; - const char *used_by = NULL; - - if (hostdev->mode != VIR_DOMAIN_HOSTDEV_MODE_SUBSYS) - continue; - if (hostdev->source.subsys.type != VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_USB) - continue; - if (hostdev->missing) - continue; - - usb = virUSBDeviceNew(hostdev->source.subsys.u.usb.bus, - hostdev->source.subsys.u.usb.device, - NULL); - - if (!usb) { - VIR_WARN("Unable to reattach USB device %03d.%03d on domain %s", - hostdev->source.subsys.u.usb.bus, - hostdev->source.subsys.u.usb.device, - name); - continue; - } - - /* Delete only those USB devices which belongs - * to domain @name because qemuProcessStart() might - * have failed because USB device is already taken. - * Therefore we want to steal only those devices from - * the list which were taken by @name */ - - tmp = virUSBDeviceListFind(driver->activeUsbHostdevs, usb); - virUSBDeviceFree(usb); - - if (!tmp) { - VIR_WARN("Unable to find device %03d.%03d " - "in list of active USB devices", - hostdev->source.subsys.u.usb.bus, - hostdev->source.subsys.u.usb.device); - continue; - } - - used_by = virUSBDeviceGetUsedBy(tmp); - if (STREQ_NULLABLE(used_by, name)) { - VIR_DEBUG("Removing %03d.%03d dom=%s from activeUsbHostdevs", - hostdev->source.subsys.u.usb.bus, - hostdev->source.subsys.u.usb.device, - name); - - virUSBDeviceListDel(driver->activeUsbHostdevs, tmp); - } - } - virObjectUnlock(driver->activeUsbHostdevs); -} - - -void -qemuDomainReAttachHostScsiDevices(virQEMUDriverPtr driver, - const char *name, - virDomainHostdevDefPtr *hostdevs, - int nhostdevs) -{ - size_t i; - - virObjectLock(driver->activeScsiHostdevs); - for (i = 0; i < nhostdevs; i++) { - virDomainHostdevDefPtr hostdev = hostdevs[i]; - virSCSIDevicePtr scsi, tmp; - const char *used_by = NULL; - virDomainDeviceDef dev; - - dev.type = VIR_DOMAIN_DEVICE_HOSTDEV; - dev.data.hostdev = hostdev; - - ignore_value(qemuRemoveSharedDevice(driver, &dev, name)); - - if (hostdev->mode != VIR_DOMAIN_HOSTDEV_MODE_SUBSYS || - hostdev->source.subsys.type != VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_SCSI) - continue; - - if (!(scsi = virSCSIDeviceNew(hostdev->source.subsys.u.scsi.adapter, - hostdev->source.subsys.u.scsi.bus, - hostdev->source.subsys.u.scsi.target, - hostdev->source.subsys.u.scsi.unit, - hostdev->readonly))) { - VIR_WARN("Unable to reattach SCSI device %s:%d:%d:%d on domain %s", - hostdev->source.subsys.u.scsi.adapter, - hostdev->source.subsys.u.scsi.bus, - hostdev->source.subsys.u.scsi.target, - hostdev->source.subsys.u.scsi.unit, - name); - continue; - } - - /* Only delete the devices which are marked as being used by @name, - * because qemuProcessStart could fail on the half way. */ - - tmp = virSCSIDeviceListFind(driver->activeScsiHostdevs, scsi); - virSCSIDeviceFree(scsi); - - if (!tmp) { - VIR_WARN("Unable to find device %s:%d:%d:%d " - "in list of active SCSI devices", - hostdev->source.subsys.u.scsi.adapter, - hostdev->source.subsys.u.scsi.bus, - hostdev->source.subsys.u.scsi.target, - hostdev->source.subsys.u.scsi.unit); - continue; - } - - used_by = virSCSIDeviceGetUsedBy(tmp); - if (STREQ_NULLABLE(used_by, name)) { - VIR_DEBUG("Removing %s:%d:%d:%d dom=%s from activeScsiHostdevs", - hostdev->source.subsys.u.scsi.adapter, - hostdev->source.subsys.u.scsi.bus, - hostdev->source.subsys.u.scsi.target, - hostdev->source.subsys.u.scsi.unit, - name); - - virSCSIDeviceListDel(driver->activeScsiHostdevs, tmp); - } - } - virObjectUnlock(driver->activeScsiHostdevs); -} - -void -qemuDomainReAttachHostDevices(virQEMUDriverPtr driver, - virDomainDefPtr def) -{ - if (!def->nhostdevs) - return; - - qemuDomainReAttachHostdevDevices(driver, def->name, def->hostdevs, - def->nhostdevs); - - qemuDomainReAttachHostUsbDevices(driver, def->name, def->hostdevs, - def->nhostdevs); - - qemuDomainReAttachHostScsiDevices(driver, def->name, def->hostdevs, - def->nhostdevs); -} diff --git a/src/qemu/qemu_hostdev.h b/src/qemu/qemu_hostdev.h deleted file mode 100644 index 272086e..0000000 --- a/src/qemu/qemu_hostdev.h +++ /dev/null @@ -1,74 +0,0 @@ -/* - * qemu_hostdev.h: QEMU hostdev management - * - * Copyright (C) 2006-2007, 2009-2010 Red Hat, Inc. - * Copyright (C) 2006 Daniel P. Berrange - * - * This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU Lesser General Public - * License as published by the Free Software Foundation; either - * version 2.1 of the License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * Lesser General Public License for more details. - * - * You should have received a copy of the GNU Lesser General Public - * License along with this library. If not, see - * <http://www.gnu.org/licenses/>. - * - * Author: Daniel P. Berrange <berrange@redhat.com> - */ - -#ifndef __QEMU_HOSTDEV_H__ -# define __QEMU_HOSTDEV_H__ - -# include "qemu_conf.h" -# include "domain_conf.h" - -int qemuUpdateActivePciHostdevs(virQEMUDriverPtr driver, - virDomainDefPtr def); -int qemuUpdateActiveUsbHostdevs(virQEMUDriverPtr driver, - virDomainDefPtr def); -int qemuUpdateActiveScsiHostdevs(virQEMUDriverPtr driver, - virDomainDefPtr def); -int qemuPrepareHostdevPCIDevices(virQEMUDriverPtr driver, - const char *name, - const unsigned char *uuid, - virDomainHostdevDefPtr *hostdevs, - int nhostdevs, - virQEMUCapsPtr qemuCaps); -int qemuFindHostdevUSBDevice(virDomainHostdevDefPtr hostdev, - bool mandatory, - virUSBDevicePtr *usb); -int qemuPrepareHostdevUSBDevices(virQEMUDriverPtr driver, - const char *name, - virUSBDeviceListPtr list); -int qemuPrepareHostdevSCSIDevices(virQEMUDriverPtr driver, - const char *name, - virDomainHostdevDefPtr *hostdevs, - int nhostdevs); -int qemuPrepareHostDevices(virQEMUDriverPtr driver, - virDomainDefPtr def, - virQEMUCapsPtr qemuCaps, - bool coldBoot); -void qemuDomainReAttachHostScsiDevices(virQEMUDriverPtr driver, - const char *name, - virDomainHostdevDefPtr *hostdevs, - int nhostdevs); -void qemuReattachPciDevice(virPCIDevicePtr dev, virQEMUDriverPtr driver); -void qemuDomainReAttachHostdevDevices(virQEMUDriverPtr driver, - const char *name, - virDomainHostdevDefPtr *hostdevs, - int nhostdevs); -void qemuDomainReAttachHostDevices(virQEMUDriverPtr driver, - virDomainDefPtr def); -int qemuDomainHostdevIsVirtualFunction(virDomainHostdevDefPtr hostdev); -int qemuDomainHostdevNetConfigReplace(virDomainHostdevDefPtr hostdev, - const unsigned char *uuid, - char *stateDir); -int qemuDomainHostdevNetConfigRestore(virDomainHostdevDefPtr hostdev, - char *stateDir); - -#endif /* __QEMU_HOSTDEV_H__ */ diff --git a/src/qemu/qemu_hotplug.c b/src/qemu/qemu_hotplug.c index c6a3134..482c9f0 100644 --- a/src/qemu/qemu_hotplug.c +++ b/src/qemu/qemu_hotplug.c @@ -30,7 +30,7 @@ #include "qemu_domain.h" #include "qemu_command.h" #include "qemu_bridge_filter.h" -#include "qemu_hostdev.h" +#include "qemu_conf.h" #include "domain_audit.h" #include "domain_nwfilter.h" #include "virlog.h" @@ -50,6 +50,7 @@ #include "virstoragefile.h" #include "virstring.h" #include "virtime.h" +#include "virhostdev.h" #define VIR_FROM_THIS VIR_FROM_QEMU #define CHANGE_MEDIA_RETRIES 10 @@ -1135,12 +1136,20 @@ int qemuDomainAttachHostPciDevice(virQEMUDriverPtr driver, char *configfd_name = NULL; bool releaseaddr = false; int backend = hostdev->source.subsys.u.pci.backend; + virQEMUDriverConfigPtr cfg = virQEMUDriverGetConfig(driver); + virHostdevManagerPtr hostdev_mgr; + unsigned int flags = 0; if (VIR_REALLOC_N(vm->def->hostdevs, vm->def->nhostdevs + 1) < 0) return -1; - if (qemuPrepareHostdevPCIDevices(driver, vm->def->name, vm->def->uuid, - &hostdev, 1, priv->qemuCaps) < 0) + hostdev_mgr = virHostdevManagerGetDefault(); + if (!cfg->relaxedACS) + flags |= VIR_STRICT_ACS_CHECK; + if (hostdev_mgr == NULL || + virHostdevPreparePciHostdevs(hostdev_mgr, QEMU_DRIVER_NAME, + vm->def->name, vm->def->uuid, + &hostdev, 1, flags) < 0) return -1; switch ((virDomainHostdevSubsysPciBackendType) backend) { @@ -1226,7 +1235,8 @@ error: if (releaseaddr) qemuDomainReleaseDeviceAddress(vm, hostdev->info, NULL); - qemuDomainReAttachHostdevDevices(driver, vm->def->name, &hostdev, 1); + virHostdevReAttachPciHostdevs(hostdev_mgr, QEMU_DRIVER_NAME, + vm->def->name, &hostdev, 1); VIR_FREE(devstr); VIR_FREE(configfd_name); @@ -1411,26 +1421,21 @@ int qemuDomainAttachHostUsbDevice(virQEMUDriverPtr driver, virDomainHostdevDefPtr hostdev) { qemuDomainObjPrivatePtr priv = vm->privateData; - virUSBDeviceList *list = NULL; - virUSBDevicePtr usb = NULL; char *devstr = NULL; bool added = false; int ret = -1; - - if (qemuFindHostdevUSBDevice(hostdev, true, &usb) < 0) + virHostdevManagerPtr hostdev_mgr; + + hostdev_mgr = virHostdevManagerGetDefault(); + if (hostdev_mgr == NULL || + virHostdevPrepareUsbHostdevs(hostdev_mgr, + QEMU_DRIVER_NAME, + vm->def->name, + &hostdev, + 1, 0) < 0) return -1; - if (!(list = virUSBDeviceListNew())) - goto cleanup; - - if (virUSBDeviceListAdd(list, usb) < 0) - goto cleanup; - - if (qemuPrepareHostdevUSBDevices(driver, vm->def->name, list) < 0) - goto cleanup; - added = true; - virUSBDeviceListSteal(list, usb); if (virQEMUCapsGet(priv->qemuCaps, QEMU_CAPS_DEVICE)) { if (qemuAssignDeviceHostdevAlias(vm->def, hostdev, -1) < 0) @@ -1459,9 +1464,8 @@ int qemuDomainAttachHostUsbDevice(virQEMUDriverPtr driver, ret = 0; cleanup: if (added) - virUSBDeviceListSteal(driver->activeUsbHostdevs, usb); - virUSBDeviceFree(usb); - virObjectUnref(list); + virHostdevReAttachUsbHostdevs(hostdev_mgr, QEMU_DRIVER_NAME, + vm->def->name, &hostdev, 1); VIR_FREE(devstr); return ret; } @@ -1475,6 +1479,7 @@ qemuDomainAttachHostScsiDevice(virQEMUDriverPtr driver, qemuDomainObjPrivatePtr priv = vm->privateData; char *devstr = NULL; char *drvstr = NULL; + virHostdevManagerPtr hostdev_mgr; if (!virQEMUCapsGet(priv->qemuCaps, QEMU_CAPS_DRIVE) || !virQEMUCapsGet(priv->qemuCaps, QEMU_CAPS_DEVICE) || @@ -1484,8 +1489,12 @@ qemuDomainAttachHostScsiDevice(virQEMUDriverPtr driver, return -1; } - if (qemuPrepareHostdevSCSIDevices(driver, vm->def->name, - &hostdev, 1)) { + hostdev_mgr = virHostdevManagerGetDefault(); + if (hostdev_mgr == NULL || + virHostdevPrepareScsiHostdevs(hostdev_mgr, + QEMU_DRIVER_NAME, + vm->def->name, + &hostdev, 1) < 0) { virReportError(VIR_ERR_INTERNAL_ERROR, _("Unable to prepare scsi hostdev: %s:%d:%d:%d"), hostdev->source.subsys.u.scsi.adapter, @@ -1533,7 +1542,8 @@ qemuDomainAttachHostScsiDevice(virQEMUDriverPtr driver, ret = 0; cleanup: if (ret < 0) - qemuDomainReAttachHostScsiDevices(driver, vm->def->name, &hostdev, 1); + virHostdevReAttachScsiHostdevs(hostdev_mgr, QEMU_DRIVER_NAME, + vm->def->name, &hostdev, 1); VIR_FREE(drvstr); VIR_FREE(devstr); return ret; @@ -2452,62 +2462,41 @@ qemuDomainRemoveControllerDevice(virQEMUDriverPtr driver, static void -qemuDomainRemovePCIHostDevice(virQEMUDriverPtr driver, - virDomainObjPtr vm, +qemuDomainRemovePCIHostDevice(virDomainObjPtr vm, virDomainHostdevDefPtr hostdev) { - virDomainHostdevSubsysPtr subsys = &hostdev->source.subsys; - virPCIDevicePtr pci; - virPCIDevicePtr activePci; - - virObjectLock(driver->activePciHostdevs); - virObjectLock(driver->inactivePciHostdevs); - pci = virPCIDeviceNew(subsys->u.pci.addr.domain, subsys->u.pci.addr.bus, - subsys->u.pci.addr.slot, subsys->u.pci.addr.function); - if (pci) { - activePci = virPCIDeviceListSteal(driver->activePciHostdevs, pci); - if (activePci && - virPCIDeviceReset(activePci, driver->activePciHostdevs, - driver->inactivePciHostdevs) == 0) { - qemuReattachPciDevice(activePci, driver); - } else { - /* reset of the device failed, treat it as if it was returned */ - virPCIDeviceFree(activePci); - } - virPCIDeviceFree(pci); - } - virObjectUnlock(driver->activePciHostdevs); - virObjectUnlock(driver->inactivePciHostdevs); + virHostdevManagerPtr hostdev_mgr; + + hostdev_mgr = virHostdevManagerGetDefault(); + if (hostdev_mgr != NULL) + virHostdevReAttachPciHostdevs(hostdev_mgr, QEMU_DRIVER_NAME, + vm->def->name, &hostdev, 1); qemuDomainReleaseDeviceAddress(vm, hostdev->info, NULL); } static void -qemuDomainRemoveUSBHostDevice(virQEMUDriverPtr driver, - virDomainObjPtr vm ATTRIBUTE_UNUSED, +qemuDomainRemoveUSBHostDevice(virDomainObjPtr vm, virDomainHostdevDefPtr hostdev) { - virDomainHostdevSubsysPtr subsys = &hostdev->source.subsys; - virUSBDevicePtr usb; - - usb = virUSBDeviceNew(subsys->u.usb.bus, subsys->u.usb.device, NULL); - if (usb) { - virObjectLock(driver->activeUsbHostdevs); - virUSBDeviceListDel(driver->activeUsbHostdevs, usb); - virObjectUnlock(driver->activeUsbHostdevs); - virUSBDeviceFree(usb); - } else { - VIR_WARN("Unable to find device %03d.%03d in list of used USB devices", - subsys->u.usb.bus, subsys->u.usb.device); - } + virHostdevManagerPtr hostdev_mgr; + + hostdev_mgr = virHostdevManagerGetDefault(); + if (hostdev_mgr != NULL) + virHostdevReAttachUsbHostdevs(hostdev_mgr, QEMU_DRIVER_NAME, + vm->def->name, &hostdev, 1); } static void -qemuDomainRemoveSCSIHostDevice(virQEMUDriverPtr driver, - virDomainObjPtr vm, +qemuDomainRemoveSCSIHostDevice(virDomainObjPtr vm, virDomainHostdevDefPtr hostdev) { - qemuDomainReAttachHostScsiDevices(driver, vm->def->name, &hostdev, 1); + virHostdevManagerPtr hostdev_mgr; + + hostdev_mgr = virHostdevManagerGetDefault(); + if (hostdev_mgr != NULL) + virHostdevReAttachScsiHostdevs(hostdev_mgr, QEMU_DRIVER_NAME, + vm->def->name, &hostdev, 1); } static void @@ -2549,13 +2538,13 @@ qemuDomainRemoveHostDevice(virQEMUDriverPtr driver, switch ((enum virDomainHostdevSubsysType) hostdev->source.subsys.type) { case VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_PCI: - qemuDomainRemovePCIHostDevice(driver, vm, hostdev); + qemuDomainRemovePCIHostDevice(vm, hostdev); break; case VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_USB: - qemuDomainRemoveUSBHostDevice(driver, vm, hostdev); + qemuDomainRemoveUSBHostDevice(vm, hostdev); break; case VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_SCSI: - qemuDomainRemoveSCSIHostDevice(driver, vm, hostdev); + qemuDomainRemoveSCSIHostDevice(vm, hostdev); break; case VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_LAST: break; diff --git a/src/qemu/qemu_process.c b/src/qemu/qemu_process.c index 7c23eb4..802ab6a 100644 --- a/src/qemu/qemu_process.c +++ b/src/qemu/qemu_process.c @@ -39,10 +39,10 @@ #include "qemu_capabilities.h" #include "qemu_monitor.h" #include "qemu_command.h" -#include "qemu_hostdev.h" #include "qemu_hotplug.h" #include "qemu_bridge_filter.h" #include "qemu_migration.h" +#include "qemu_conf.h" #include "datatypes.h" #include "virlog.h" @@ -65,6 +65,7 @@ #include "viratomic.h" #include "virnuma.h" #include "virstring.h" +#include "virhostdev.h" #define VIR_FROM_THIS VIR_FROM_QEMU @@ -3063,6 +3064,8 @@ qemuProcessReconnect(void *opaque) int reason; virQEMUDriverConfigPtr cfg; size_t i; + virHostdevManagerPtr hostdev_mgr; + unsigned int flags; memcpy(&oldjob, &data->oldjob, sizeof(oldjob)); @@ -3094,14 +3097,12 @@ qemuProcessReconnect(void *opaque) priv->agentError = true; } - if (qemuUpdateActivePciHostdevs(driver, obj->def) < 0) { - goto error; - } - - if (qemuUpdateActiveUsbHostdevs(driver, obj->def) < 0) - goto error; - if (qemuUpdateActiveScsiHostdevs(driver, obj->def) < 0) + hostdev_mgr = virHostdevManagerGetDefault(); + flags = VIR_SP_PCI_HOSTDEV | VIR_SP_USB_HOSTDEV | VIR_SP_SCSI_HOSTDEV; + if (hostdev_mgr == NULL || + virHostdevUpdateActiveHostdevs(hostdev_mgr, QEMU_DRIVER_NAME, + obj->def, flags) < 0) goto error; if (qemuConnectCgroup(driver, obj) < 0) @@ -3499,6 +3500,9 @@ int qemuProcessStart(virConnectPtr conn, virQEMUDriverConfigPtr cfg; virCapsPtr caps = NULL; + virHostdevManagerPtr hostdev_mgr; + unsigned int hostdev_flags; + VIR_DEBUG("vm=%p name=%s id=%d pid=%llu", vm, vm->def->name, vm->def->id, (unsigned long long)vm->pid); @@ -3587,8 +3591,16 @@ int qemuProcessStart(virConnectPtr conn, /* Must be run before security labelling */ VIR_DEBUG("Preparing host devices"); - if (qemuPrepareHostDevices(driver, vm->def, priv->qemuCaps, - !migrateFrom) < 0) + hostdev_mgr = virHostdevManagerGetDefault(); + if (hostdev_mgr == NULL) + goto cleanup; + hostdev_flags = VIR_SP_PCI_HOSTDEV | VIR_SP_USB_HOSTDEV | VIR_SP_SCSI_HOSTDEV; + if (!migrateFrom) + hostdev_flags |= VIR_COLD_BOOT; + if (!cfg->relaxedACS) + hostdev_flags |= VIR_STRICT_ACS_CHECK; + if (virHostdevPrepareDomainHostdevs(hostdev_mgr, QEMU_DRIVER_NAME, + vm->def, hostdev_flags) < 0) goto cleanup; VIR_DEBUG("Preparing chr devices"); @@ -4118,6 +4130,8 @@ void qemuProcessStop(virQEMUDriverPtr driver, char *timestamp; char ebuf[1024]; virQEMUDriverConfigPtr cfg = virQEMUDriverGetConfig(driver); + virHostdevManagerPtr hostdev_mgr; + unsigned int hostdev_flags; VIR_DEBUG("Shutting down vm=%p name=%s id=%d pid=%llu flags=%x", vm, vm->def->name, vm->def->id, @@ -4261,7 +4275,11 @@ void qemuProcessStop(virQEMUDriverPtr driver, priv->ccwaddrs = NULL; } - qemuDomainReAttachHostDevices(driver, vm->def); + hostdev_mgr = virHostdevManagerGetDefault(); + hostdev_flags = VIR_SP_PCI_HOSTDEV | VIR_SP_USB_HOSTDEV | VIR_SP_SCSI_HOSTDEV; + if (hostdev_mgr != NULL) + virHostdevReAttachDomainHostdevs(hostdev_mgr, QEMU_DRIVER_NAME, + vm->def, hostdev_flags); def = vm->def; for (i = 0; i < def->nnets; i++) { -- 1.6.0.2

Change lxc driver to use hostdev common library instead of its own APIs in lxc_hostdev.[ch] Signed-off-by: Chunyan Liu <cyliu@suse.com> --- po/POTFILES.in | 1 - src/Makefile.am | 1 - src/lxc/lxc_conf.h | 4 - src/lxc/lxc_driver.c | 47 ++++--- src/lxc/lxc_hostdev.c | 413 ------------------------------------------------- src/lxc/lxc_hostdev.h | 43 ----- src/lxc/lxc_process.c | 24 +++- 7 files changed, 48 insertions(+), 485 deletions(-) delete mode 100644 src/lxc/lxc_hostdev.c delete mode 100644 src/lxc/lxc_hostdev.h diff --git a/po/POTFILES.in b/po/POTFILES.in index 272fbe9..bef9e25 100644 --- a/po/POTFILES.in +++ b/po/POTFILES.in @@ -61,7 +61,6 @@ src/locking/lock_manager.c src/locking/sanlock_helper.c src/lxc/lxc_cgroup.c src/lxc/lxc_fuse.c -src/lxc/lxc_hostdev.c src/lxc/lxc_container.c src/lxc/lxc_conf.c src/lxc/lxc_controller.c diff --git a/src/Makefile.am b/src/Makefile.am index ba6a661..0fdf18f 100644 --- a/src/Makefile.am +++ b/src/Makefile.am @@ -610,7 +610,6 @@ LXC_DRIVER_SOURCES = \ lxc/lxc_container.c lxc/lxc_container.h \ lxc/lxc_cgroup.c lxc/lxc_cgroup.h \ lxc/lxc_domain.c lxc/lxc_domain.h \ - lxc/lxc_hostdev.c lxc/lxc_hostdev.h \ lxc/lxc_monitor.c lxc/lxc_monitor.h \ lxc/lxc_process.c lxc/lxc_process.h \ lxc/lxc_fuse.c lxc/lxc_fuse.h \ diff --git a/src/lxc/lxc_conf.h b/src/lxc/lxc_conf.h index a6208a2..05f2a80 100644 --- a/src/lxc/lxc_conf.h +++ b/src/lxc/lxc_conf.h @@ -92,10 +92,6 @@ struct _virLXCDriver { /* Immutable pointer, self-locking APIs */ virDomainObjListPtr domains; - /* Immutable pointer. Requires lock to be held before - * calling APIs. */ - virUSBDeviceListPtr activeUsbHostdevs; - /* Immutable pointer, self-locking APIs */ virDomainEventStatePtr domainEventState; diff --git a/src/lxc/lxc_driver.c b/src/lxc/lxc_driver.c index 61a90ca..9e20bfe 100644 --- a/src/lxc/lxc_driver.c +++ b/src/lxc/lxc_driver.c @@ -70,6 +70,7 @@ #include "virstring.h" #include "viraccessapicheck.h" #include "viraccessapichecklxc.h" +#include "virhostdev.h" #define VIR_FROM_THIS VIR_FROM_LXC @@ -1417,9 +1418,6 @@ static int lxcStateInitialize(bool privileged, if (!(lxc_driver->securityManager = lxcSecurityInit(cfg))) goto cleanup; - if ((lxc_driver->activeUsbHostdevs = virUSBDeviceListNew()) == NULL) - goto cleanup; - if ((virLXCDriverGetCapabilities(lxc_driver, true)) == NULL) goto cleanup; @@ -1534,7 +1532,6 @@ static int lxcStateCleanup(void) virSysinfoDefFree(lxc_driver->hostsysinfo); - virObjectUnref(lxc_driver->activeUsbHostdevs); virObjectUnref(lxc_driver->caps); virObjectUnref(lxc_driver->securityManager); virObjectUnref(lxc_driver->xmlopt); @@ -3172,6 +3169,7 @@ lxcDomainAttachDeviceHostdevSubsysUSBLive(virLXCDriverPtr driver, mode_t mode; bool created = false; virUSBDevicePtr usb = NULL; + virHostdevManagerPtr hostdev_mgr; if (virDomainHostdevFind(vm->def, def, NULL) >= 0) { virReportError(VIR_ERR_OPERATION_FAILED, "%s", @@ -3179,6 +3177,14 @@ lxcDomainAttachDeviceHostdevSubsysUSBLive(virLXCDriverPtr driver, return -1; } + hostdev_mgr = virHostdevManagerGetDefault(); + if (hostdev_mgr == NULL || + virHostdevPrepareUsbHostdevs(hostdev_mgr, + LXC_DRIVER_NAME, + vm->def->name, + &def, 1, 0) < 0) + return -1; + if (virAsprintf(&vroot, "/proc/%llu/root", (unsigned long long)priv->initpid) < 0) goto cleanup; @@ -3254,6 +3260,11 @@ lxcDomainAttachDeviceHostdevSubsysUSBLive(virLXCDriverPtr driver, ret = 0; cleanup: + virHostdevReAttachUsbHostdevs(hostdev_mgr, + LXC_DRIVER_NAME, + vm->def->name, + &def, + 1); virDomainAuditHostdev(vm, def, "attach", ret == 0); if (ret < 0 && created) unlink(dstfile); @@ -3716,8 +3727,7 @@ cleanup: static int -lxcDomainDetachDeviceHostdevUSBLive(virLXCDriverPtr driver, - virDomainObjPtr vm, +lxcDomainDetachDeviceHostdevUSBLive(virDomainObjPtr vm, virDomainDeviceDefPtr dev) { virLXCDomainObjPrivatePtr priv = vm->privateData; @@ -3726,6 +3736,7 @@ lxcDomainDetachDeviceHostdevUSBLive(virLXCDriverPtr driver, char *dst = NULL; char *vroot = NULL; virUSBDevicePtr usb = NULL; + virHostdevManagerPtr hostdev_mgr; if ((idx = virDomainHostdevFind(vm->def, dev->data.hostdev, @@ -3770,9 +3781,10 @@ lxcDomainDetachDeviceHostdevUSBLive(virLXCDriverPtr driver, VIR_WARN("cannot deny device %s for domain %s", dst, vm->def->name); - virObjectLock(driver->activeUsbHostdevs); - virUSBDeviceListDel(driver->activeUsbHostdevs, usb); - virObjectUnlock(driver->activeUsbHostdevs); + hostdev_mgr = virHostdevManagerGetDefault(); + if (hostdev_mgr != NULL) + virHostdevReAttachPciHostdevs(hostdev_mgr, LXC_DRIVER_NAME, + vm->def->name, &def, 1); virDomainHostdevRemove(vm->def, idx); virDomainHostdevDefFree(def); @@ -3906,13 +3918,12 @@ cleanup: static int -lxcDomainDetachDeviceHostdevSubsysLive(virLXCDriverPtr driver, - virDomainObjPtr vm, +lxcDomainDetachDeviceHostdevSubsysLive(virDomainObjPtr vm, virDomainDeviceDefPtr dev) { switch (dev->data.hostdev->source.subsys.type) { case VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_USB: - return lxcDomainDetachDeviceHostdevUSBLive(driver, vm, dev); + return lxcDomainDetachDeviceHostdevUSBLive(vm, dev); default: virReportError(VIR_ERR_CONFIG_UNSUPPORTED, @@ -3944,8 +3955,7 @@ lxcDomainDetachDeviceHostdevCapsLive(virDomainObjPtr vm, static int -lxcDomainDetachDeviceHostdevLive(virLXCDriverPtr driver, - virDomainObjPtr vm, +lxcDomainDetachDeviceHostdevLive(virDomainObjPtr vm, virDomainDeviceDefPtr dev) { virLXCDomainObjPrivatePtr priv = vm->privateData; @@ -3958,7 +3968,7 @@ lxcDomainDetachDeviceHostdevLive(virLXCDriverPtr driver, switch (dev->data.hostdev->mode) { case VIR_DOMAIN_HOSTDEV_MODE_SUBSYS: - return lxcDomainDetachDeviceHostdevSubsysLive(driver, vm, dev); + return lxcDomainDetachDeviceHostdevSubsysLive(vm, dev); case VIR_DOMAIN_HOSTDEV_MODE_CAPABILITIES: return lxcDomainDetachDeviceHostdevCapsLive(vm, dev); @@ -3973,8 +3983,7 @@ lxcDomainDetachDeviceHostdevLive(virLXCDriverPtr driver, static int -lxcDomainDetachDeviceLive(virLXCDriverPtr driver, - virDomainObjPtr vm, +lxcDomainDetachDeviceLive(virDomainObjPtr vm, virDomainDeviceDefPtr dev) { int ret = -1; @@ -3989,7 +3998,7 @@ lxcDomainDetachDeviceLive(virLXCDriverPtr driver, break; case VIR_DOMAIN_DEVICE_HOSTDEV: - ret = lxcDomainDetachDeviceHostdevLive(driver, vm, dev); + ret = lxcDomainDetachDeviceHostdevLive(vm, dev); break; default: @@ -4322,7 +4331,7 @@ static int lxcDomainDetachDeviceFlags(virDomainPtr dom, if (virDomainDefCompatibleDevice(vm->def, dev_copy) < 0) goto cleanup; - if ((ret = lxcDomainDetachDeviceLive(driver, vm, dev_copy)) < 0) + if ((ret = lxcDomainDetachDeviceLive(vm, dev_copy)) < 0) goto cleanup; /* * update domain status forcibly because the domain status may be diff --git a/src/lxc/lxc_hostdev.c b/src/lxc/lxc_hostdev.c deleted file mode 100644 index 3b371fc..0000000 --- a/src/lxc/lxc_hostdev.c +++ /dev/null @@ -1,413 +0,0 @@ -/* - * virLXC_hostdev.c: VIRLXC hostdev management - * - * Copyright (C) 2006-2007, 2009-2012 Red Hat, Inc. - * Copyright (C) 2006 Daniel P. Berrange - * - * This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU Lesser General Public - * License as published by the Free Software Foundation; either - * version 2.1 of the License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * Lesser General Public License for more details. - * - * You should have received a copy of the GNU Lesser General Public - * License along with this library. If not, see - * <http://www.gnu.org/licenses/>. - * - * Author: Daniel P. Berrange <berrange@redhat.com> - */ - -#include <config.h> - -#include "lxc_hostdev.h" -#include "viralloc.h" -#include "virlog.h" -#include "virerror.h" - -#define VIR_FROM_THIS VIR_FROM_LXC - -int -virLXCUpdateActiveUsbHostdevs(virLXCDriverPtr driver, - virDomainDefPtr def) -{ - virDomainHostdevDefPtr hostdev = NULL; - size_t i; - - if (!def->nhostdevs) - return 0; - - for (i = 0; i < def->nhostdevs; i++) { - virUSBDevicePtr usb = NULL; - hostdev = def->hostdevs[i]; - - if (hostdev->mode != VIR_DOMAIN_HOSTDEV_MODE_SUBSYS) - continue; - if (hostdev->source.subsys.type != VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_USB) - continue; - - usb = virUSBDeviceNew(hostdev->source.subsys.u.usb.bus, - hostdev->source.subsys.u.usb.device, - NULL); - if (!usb) { - VIR_WARN("Unable to reattach USB device %03d.%03d on domain %s", - hostdev->source.subsys.u.usb.bus, - hostdev->source.subsys.u.usb.device, - def->name); - continue; - } - - virUSBDeviceSetUsedBy(usb, def->name); - - virObjectLock(driver->activeUsbHostdevs); - if (virUSBDeviceListAdd(driver->activeUsbHostdevs, usb) < 0) { - virObjectUnlock(driver->activeUsbHostdevs); - virUSBDeviceFree(usb); - return -1; - } - virObjectUnlock(driver->activeUsbHostdevs); - } - - return 0; -} - - -int -virLXCPrepareHostdevUSBDevices(virLXCDriverPtr driver, - const char *name, - virUSBDeviceList *list) -{ - size_t i, j; - unsigned int count; - virUSBDevicePtr tmp; - - count = virUSBDeviceListCount(list); - - virObjectLock(driver->activeUsbHostdevs); - for (i = 0; i < count; i++) { - virUSBDevicePtr usb = virUSBDeviceListGet(list, i); - if ((tmp = virUSBDeviceListFind(driver->activeUsbHostdevs, usb))) { - const char *other_name = virUSBDeviceGetUsedBy(tmp); - - if (other_name) - virReportError(VIR_ERR_OPERATION_INVALID, - _("USB device %s is in use by domain %s"), - virUSBDeviceGetName(tmp), other_name); - else - virReportError(VIR_ERR_OPERATION_INVALID, - _("USB device %s is already in use"), - virUSBDeviceGetName(tmp)); - goto error; - } - - virUSBDeviceSetUsedBy(usb, name); - VIR_DEBUG("Adding %03d.%03d dom=%s to activeUsbHostdevs", - virUSBDeviceGetBus(usb), virUSBDeviceGetDevno(usb), name); - /* - * The caller is responsible to steal these usb devices - * from the virUSBDeviceList that passed in on success, - * perform rollback on failure. - */ - if (virUSBDeviceListAdd(driver->activeUsbHostdevs, usb) < 0) - goto error; - } - virObjectUnlock(driver->activeUsbHostdevs); - return 0; - -error: - for (j = 0; j < i; j++) { - tmp = virUSBDeviceListGet(list, i); - virUSBDeviceListSteal(driver->activeUsbHostdevs, tmp); - } - virObjectUnlock(driver->activeUsbHostdevs); - return -1; -} - -int -virLXCFindHostdevUSBDevice(virDomainHostdevDefPtr hostdev, - bool mandatory, - virUSBDevicePtr *usb) -{ - unsigned vendor = hostdev->source.subsys.u.usb.vendor; - unsigned product = hostdev->source.subsys.u.usb.product; - unsigned bus = hostdev->source.subsys.u.usb.bus; - unsigned device = hostdev->source.subsys.u.usb.device; - bool autoAddress = hostdev->source.subsys.u.usb.autoAddress; - int rc; - - *usb = NULL; - - if (vendor && bus) { - rc = virUSBDeviceFind(vendor, product, bus, device, - NULL, - autoAddress ? false : mandatory, - usb); - if (rc < 0) { - return -1; - } else if (!autoAddress) { - goto out; - } else { - VIR_INFO("USB device %x:%x could not be found at previous" - " address (bus:%u device:%u)", - vendor, product, bus, device); - } - } - - /* When vendor is specified, its USB address is either unspecified or the - * device could not be found at the USB device where it had been - * automatically found before. - */ - if (vendor) { - virUSBDeviceList *devs; - - rc = virUSBDeviceFindByVendor(vendor, product, - NULL, - mandatory, &devs); - if (rc < 0) - return -1; - - if (rc == 1) { - *usb = virUSBDeviceListGet(devs, 0); - virUSBDeviceListSteal(devs, *usb); - } - virObjectUnref(devs); - - if (rc == 0) { - goto out; - } else if (rc > 1) { - if (autoAddress) { - virReportError(VIR_ERR_OPERATION_FAILED, - _("Multiple USB devices for %x:%x were found," - " but none of them is at bus:%u device:%u"), - vendor, product, bus, device); - } else { - virReportError(VIR_ERR_OPERATION_FAILED, - _("Multiple USB devices for %x:%x, " - "use <address> to specify one"), - vendor, product); - } - return -1; - } - - hostdev->source.subsys.u.usb.bus = virUSBDeviceGetBus(*usb); - hostdev->source.subsys.u.usb.device = virUSBDeviceGetDevno(*usb); - hostdev->source.subsys.u.usb.autoAddress = true; - - if (autoAddress) { - VIR_INFO("USB device %x:%x found at bus:%u device:%u (moved" - " from bus:%u device:%u)", - vendor, product, - hostdev->source.subsys.u.usb.bus, - hostdev->source.subsys.u.usb.device, - bus, device); - } - } else if (!vendor && bus) { - if (virUSBDeviceFindByBus(bus, device, - NULL, - mandatory, usb) < 0) - return -1; - } - -out: - if (!*usb) - hostdev->missing = true; - return 0; -} - -static int -virLXCPrepareHostUSBDevices(virLXCDriverPtr driver, - virDomainDefPtr def) -{ - size_t i; - int ret = -1; - virUSBDeviceList *list; - virUSBDevicePtr tmp; - virDomainHostdevDefPtr *hostdevs = def->hostdevs; - int nhostdevs = def->nhostdevs; - - /* To prevent situation where USB device is assigned to two domains - * we need to keep a list of currently assigned USB devices. - * This is done in several loops which cannot be joined into one big - * loop. See virLXCPrepareHostdevPCIDevices() - */ - if (!(list = virUSBDeviceListNew())) - goto cleanup; - - /* Loop 1: build temporary list - */ - for (i = 0; i < nhostdevs; i++) { - virDomainHostdevDefPtr hostdev = hostdevs[i]; - bool required = true; - virUSBDevicePtr usb; - - if (hostdev->mode != VIR_DOMAIN_HOSTDEV_MODE_SUBSYS) - continue; - if (hostdev->source.subsys.type != VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_USB) - continue; - - if (hostdev->startupPolicy == VIR_DOMAIN_STARTUP_POLICY_OPTIONAL) - required = false; - - if (virLXCFindHostdevUSBDevice(hostdev, required, &usb) < 0) - goto cleanup; - - if (usb && virUSBDeviceListAdd(list, usb) < 0) { - virUSBDeviceFree(usb); - goto cleanup; - } - } - - /* Mark devices in temporary list as used by @name - * and add them do driver list. However, if something goes - * wrong, perform rollback. - */ - if (virLXCPrepareHostdevUSBDevices(driver, def->name, list) < 0) - goto cleanup; - - /* Loop 2: Temporary list was successfully merged with - * driver list, so steal all items to avoid freeing them - * in cleanup label. - */ - while (virUSBDeviceListCount(list) > 0) { - tmp = virUSBDeviceListGet(list, 0); - virUSBDeviceListSteal(list, tmp); - } - - ret = 0; - -cleanup: - virObjectUnref(list); - return ret; -} - - -int virLXCPrepareHostDevices(virLXCDriverPtr driver, - virDomainDefPtr def) -{ - size_t i; - - if (!def->nhostdevs) - return 0; - - /* Sanity check for supported configurations only */ - for (i = 0; i < def->nhostdevs; i++) { - virDomainHostdevDefPtr dev = def->hostdevs[i]; - - switch (dev->mode) { - case VIR_DOMAIN_HOSTDEV_MODE_SUBSYS: - switch (dev->source.subsys.type) { - case VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_USB: - break; - default: - virReportError(VIR_ERR_CONFIG_UNSUPPORTED, - _("Unsupported hostdev type %s"), - virDomainHostdevSubsysTypeToString(dev->source.subsys.type)); - return -1; - } - break; - - case VIR_DOMAIN_HOSTDEV_MODE_CAPABILITIES: - switch (dev->source.subsys.type) { - case VIR_DOMAIN_HOSTDEV_CAPS_TYPE_STORAGE: - case VIR_DOMAIN_HOSTDEV_CAPS_TYPE_MISC: - case VIR_DOMAIN_HOSTDEV_CAPS_TYPE_NET: - break; - default: - virReportError(VIR_ERR_CONFIG_UNSUPPORTED, - _("Unsupported hostdev type %s"), - virDomainHostdevSubsysTypeToString(dev->source.subsys.type)); - return -1; - } - break; - - - default: - virReportError(VIR_ERR_CONFIG_UNSUPPORTED, - _("Unsupported hostdev mode %s"), - virDomainHostdevModeTypeToString(dev->mode)); - return -1; - } - } - - if (virLXCPrepareHostUSBDevices(driver, def) < 0) - return -1; - - return 0; -} - - -static void -virLXCDomainReAttachHostUsbDevices(virLXCDriverPtr driver, - const char *name, - virDomainHostdevDefPtr *hostdevs, - int nhostdevs) -{ - size_t i; - - virObjectLock(driver->activeUsbHostdevs); - for (i = 0; i < nhostdevs; i++) { - virDomainHostdevDefPtr hostdev = hostdevs[i]; - virUSBDevicePtr usb, tmp; - const char *used_by = NULL; - - if (hostdev->mode != VIR_DOMAIN_HOSTDEV_MODE_SUBSYS) - continue; - if (hostdev->source.subsys.type != VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_USB) - continue; - if (hostdev->missing) - continue; - - usb = virUSBDeviceNew(hostdev->source.subsys.u.usb.bus, - hostdev->source.subsys.u.usb.device, - NULL); - - if (!usb) { - VIR_WARN("Unable to reattach USB device %03d.%03d on domain %s", - hostdev->source.subsys.u.usb.bus, - hostdev->source.subsys.u.usb.device, - name); - continue; - } - - /* Delete only those USB devices which belongs - * to domain @name because virLXCProcessStart() might - * have failed because USB device is already taken. - * Therefore we want to steal only those devices from - * the list which were taken by @name */ - - tmp = virUSBDeviceListFind(driver->activeUsbHostdevs, usb); - virUSBDeviceFree(usb); - - if (!tmp) { - VIR_WARN("Unable to find device %03d.%03d " - "in list of active USB devices", - hostdev->source.subsys.u.usb.bus, - hostdev->source.subsys.u.usb.device); - continue; - } - - used_by = virUSBDeviceGetUsedBy(tmp); - if (STREQ_NULLABLE(used_by, name)) { - VIR_DEBUG("Removing %03d.%03d dom=%s from activeUsbHostdevs", - hostdev->source.subsys.u.usb.bus, - hostdev->source.subsys.u.usb.device, - name); - - virUSBDeviceListDel(driver->activeUsbHostdevs, tmp); - } - } - virObjectUnlock(driver->activeUsbHostdevs); -} - -void virLXCDomainReAttachHostDevices(virLXCDriverPtr driver, - virDomainDefPtr def) -{ - if (!def->nhostdevs) - return; - - virLXCDomainReAttachHostUsbDevices(driver, def->name, def->hostdevs, - def->nhostdevs); -} diff --git a/src/lxc/lxc_hostdev.h b/src/lxc/lxc_hostdev.h deleted file mode 100644 index 41bb178..0000000 --- a/src/lxc/lxc_hostdev.h +++ /dev/null @@ -1,43 +0,0 @@ -/* - * virLXC_hostdev.h: VIRLXC hostdev management - * - * Copyright (C) 2006-2007, 2009-2010 Red Hat, Inc. - * Copyright (C) 2006 Daniel P. Berrange - * - * This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU Lesser General Public - * License as published by the Free Software Foundation; either - * version 2.1 of the License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * Lesser General Public License for more details. - * - * You should have received a copy of the GNU Lesser General Public - * License along with this library. If not, see - * <http://www.gnu.org/licenses/>. - * - * Author: Daniel P. Berrange <berrange@redhat.com> - */ - -#ifndef __LXC_HOSTDEV_H__ -# define __LXC_HOSTDEV_H__ - -# include "lxc_conf.h" -# include "domain_conf.h" - -int virLXCUpdateActiveUsbHostdevs(virLXCDriverPtr driver, - virDomainDefPtr def); -int virLXCFindHostdevUSBDevice(virDomainHostdevDefPtr hostdev, - bool mandatory, - virUSBDevicePtr *usb); -int virLXCPrepareHostdevUSBDevices(virLXCDriverPtr driver, - const char *name, - virUSBDeviceListPtr list); -int virLXCPrepareHostDevices(virLXCDriverPtr driver, - virDomainDefPtr def); -void virLXCDomainReAttachHostDevices(virLXCDriverPtr driver, - virDomainDefPtr def); - -#endif /* __LXC_HOSTDEV_H__ */ diff --git a/src/lxc/lxc_process.c b/src/lxc/lxc_process.c index c51c4d5..c65f10b 100644 --- a/src/lxc/lxc_process.c +++ b/src/lxc/lxc_process.c @@ -45,7 +45,7 @@ #include "virerror.h" #include "virlog.h" #include "vircommand.h" -#include "lxc_hostdev.h" +#include "virhostdev.h" #include "virhook.h" #include "virstring.h" #include "viratomic.h" @@ -152,6 +152,7 @@ static void virLXCProcessCleanup(virLXCDriverPtr driver, virLXCDomainObjPrivatePtr priv = vm->privateData; virNetDevVPortProfilePtr vport = NULL; virLXCDriverConfigPtr cfg = virLXCDriverGetConfig(driver); + virHostdevManagerPtr hostdev_mgr; VIR_DEBUG("Stopping VM name=%s pid=%d reason=%d", vm->def->name, (int)vm->pid, (int)reason); @@ -187,7 +188,12 @@ static void virLXCProcessCleanup(virLXCDriverPtr driver, if (virAtomicIntDecAndTest(&driver->nactive) && driver->inhibitCallback) driver->inhibitCallback(false, driver->inhibitOpaque); - virLXCDomainReAttachHostDevices(driver, vm->def); + hostdev_mgr = virHostdevManagerGetDefault(); + if (hostdev_mgr != NULL) + virHostdevReAttachDomainHostdevs(hostdev_mgr, + LXC_DRIVER_NAME, + vm->def, + VIR_SP_USB_HOSTDEV); for (i = 0; i < vm->def->nnets; i++) { virDomainNetDefPtr iface = vm->def->nets[i]; @@ -995,6 +1001,7 @@ int virLXCProcessStart(virConnectPtr conn, virLXCDriverConfigPtr cfg = virLXCDriverGetConfig(driver); virCgroupPtr selfcgroup; int status; + virHostdevManagerPtr hostdev_mgr; if (virCgroupNewSelf(&selfcgroup) < 0) return -1; @@ -1080,7 +1087,12 @@ int virLXCProcessStart(virConnectPtr conn, /* Must be run before security labelling */ VIR_DEBUG("Preparing host devices"); - if (virLXCPrepareHostDevices(driver, vm->def) < 0) + hostdev_mgr = virHostdevManagerGetDefault(); + if (hostdev_mgr == NULL || + virHostdevPrepareDomainHostdevs(hostdev_mgr, + LXC_DRIVER_NAME, + vm->def, + VIR_SP_USB_HOSTDEV) < 0) goto cleanup; /* Here we open all the PTYs we need on the host OS side. @@ -1434,6 +1446,7 @@ virLXCProcessReconnectDomain(virDomainObjPtr vm, { virLXCDriverPtr driver = opaque; virLXCDomainObjPrivatePtr priv; + virHostdevManagerPtr hostdev_mgr; int ret = -1; virObjectLock(vm); @@ -1466,7 +1479,10 @@ virLXCProcessReconnectDomain(virDomainObjPtr vm, goto error; } - if (virLXCUpdateActiveUsbHostdevs(driver, vm->def) < 0) + hostdev_mgr = virHostdevManagerGetDefault(); + if (hostdev_mgr == NULL || + virHostdevUpdateActiveHostdevs(hostdev_mgr, LXC_DRIVER_NAME, + vm->def, VIR_SP_USB_HOSTDEV) < 0) goto error; if (virSecurityManagerReserveLabel(driver->securityManager, -- 1.6.0.2

Chunyan Liu wrote:
Change qemu driver to use hostdev common library instead of APIs in qemu_hostdev.[ch]
Signed-off-by: Chunyan Liu <cyliu@suse.com> --- po/POTFILES.in | 1 - src/Makefile.am | 1 - src/qemu/qemu_command.c | 1 - src/qemu/qemu_conf.h | 9 +- src/qemu/qemu_driver.c | 77 +-- src/qemu/qemu_hostdev.c | 1453 ----------------------------------------------- src/qemu/qemu_hostdev.h | 74 --- src/qemu/qemu_hotplug.c | 127 ++--- src/qemu/qemu_process.c | 40 +- 9 files changed, 102 insertions(+), 1681 deletions(-) delete mode 100644 src/qemu/qemu_hostdev.c delete mode 100644 src/qemu/qemu_hostdev.h
FYI, on git master from Friday, this patch causes qemuhotplugtest to fail when running 'make check'. I didn't check to see if was due to my rebase, since you'll need a v7 anyhow. Regards, Jim

Chunyan Liu wrote:
Add hostdev passthrough common library so that it could be shared by all drivers and maintain a global hostdev state.
Hi Chunyan, Looks like you addressed all of Daniel's comments from v5. One bug fix and a few additional comments below...
Signed-off-by: Chunyan Liu <cyliu@suse.com> --- po/POTFILES.in | 1 + src/Makefile.am | 1 + src/libvirt_private.syms | 20 + src/qemu/qemu_domain.c | 22 + src/qemu/qemu_hotplug.c | 2 - src/util/virhostdev.c | 1671 ++++++++++++++++++++++++++++++++++++++++++++++ src/util/virhostdev.h | 129 ++++ src/util/virpci.c | 30 +- src/util/virpci.h | 9 +- src/util/virscsi.c | 28 +- src/util/virscsi.h | 8 +- src/util/virusb.c | 29 +- src/util/virusb.h | 8 +- 13 files changed, 1928 insertions(+), 30 deletions(-) create mode 100644 src/util/virhostdev.c create mode 100644 src/util/virhostdev.h
diff --git a/po/POTFILES.in b/po/POTFILES.in index 15afdec..384204b 100644 --- a/po/POTFILES.in +++ b/po/POTFILES.in @@ -159,6 +159,7 @@ src/util/vireventpoll.c src/util/virfile.c src/util/virhash.c src/util/virhook.c +src/util/virhostdev.c src/util/viridentity.c src/util/virinitctl.c src/util/viriptables.c diff --git a/src/Makefile.am b/src/Makefile.am index 21b9caf..c2dc46f 100644 --- a/src/Makefile.am +++ b/src/Makefile.am @@ -152,6 +152,7 @@ UTIL_SOURCES = \ util/virutil.c util/virutil.h \ util/viruuid.c util/viruuid.h \ util/virxml.c util/virxml.h \ + util/virhostdev.c util/virhostdev.h \ $(NULL)
diff --git a/src/libvirt_private.syms b/src/libvirt_private.syms index 675835f..dee4135 100644 --- a/src/libvirt_private.syms +++ b/src/libvirt_private.syms @@ -1243,6 +1243,26 @@ virHookInitialize; virHookPresent;
+#util/virhostdev.h +virHostdevHostSupportsPassthroughVFIO; +virHostdevManagerGetDefault; +virHostdevPciNodeDeviceDetach; +virHostdevPciNodeDeviceReAttach; +virHostdevPciNodeDeviceReset; +virHostdevPrepareDomainHostdevs; +virHostdevPreparePciHostdevs; +virHostdevPrepareScsiHostdevs; +virHostdevPrepareUsbHostdevs; +virHostdevReAttachDomainHostdevs; +virHostdevReAttachPciHostdevs; +virHostdevReAttachScsiHostdevs; +virHostdevReAttachUsbHostdevs; +virHostdevUpdateActiveHostdevs; +virHostdevUpdateActivePciHostdevs; +virHostdevUpdateActiveScsiHostdevs; +virHostdevUpdateActiveUsbHostdevs; + + # util/viridentity.h virIdentityGetAttr; virIdentityGetCurrent; diff --git a/src/qemu/qemu_domain.c b/src/qemu/qemu_domain.c index 81d0ba9..52697a9 100644 --- a/src/qemu/qemu_domain.c +++ b/src/qemu/qemu_domain.c @@ -38,6 +38,7 @@ #include "virtime.h" #include "virstoragefile.h" #include "virstring.h" +#include "virhostdev.h"
#include <sys/time.h> #include <fcntl.h> @@ -814,6 +815,7 @@ qemuDomainDeviceDefPostParse(virDomainDeviceDefPtr dev, int ret = -1; virQEMUDriverPtr driver = opaque; virQEMUDriverConfigPtr cfg = NULL; + virQEMUCapsPtr qemuCaps = NULL;
if (dev->type == VIR_DOMAIN_DEVICE_NET && dev->data.net->type != VIR_DOMAIN_NET_TYPE_HOSTDEV && @@ -892,6 +894,26 @@ qemuDomainDeviceDefPostParse(virDomainDeviceDefPtr dev, dev->data.chr->source.data.nix.listen = true; }
+ if (dev->type == VIR_DOMAIN_DEVICE_HOSTDEV) { + virDomainHostdevDefPtr hostdev = dev->data.hostdev; + bool supportsPassthroughVFIO = virHostdevHostSupportsPassthroughVFIO(); + if (!(qemuCaps = virQEMUCapsCacheLookupCopy(driver->qemuCapsCache, + def->emulator))) + goto cleanup; + + if (hostdev->mode == VIR_DOMAIN_HOSTDEV_MODE_SUBSYS && + hostdev->source.subsys.type == VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_PCI && + hostdev->source.subsys.u.pci.backend == VIR_DOMAIN_HOSTDEV_PCI_BACKEND_DEFAULT) { + if (supportsPassthroughVFIO && + virQEMUCapsGet(qemuCaps, QEMU_CAPS_DEVICE_VFIO_PCI)) + hostdev->source.subsys.u.pci.backend = VIR_DOMAIN_HOSTDEV_PCI_BACKEND_VFIO; + else + hostdev->source.subsys.u.pci.backend = VIR_DOMAIN_HOSTDEV_PCI_BACKEND_KVM; + } + + virObjectUnref(qemuCaps); + } + ret = 0;
cleanup: diff --git a/src/qemu/qemu_hotplug.c b/src/qemu/qemu_hotplug.c index a72e1f1..c6a3134 100644 --- a/src/qemu/qemu_hotplug.c +++ b/src/qemu/qemu_hotplug.c @@ -2547,8 +2547,6 @@ qemuDomainRemoveHostDevice(virQEMUDriverPtr driver,
virDomainAuditHostdev(vm, hostdev, "detach", true);
- qemuDomainHostdevNetConfigRestore(hostdev, cfg->stateDir); - switch ((enum virDomainHostdevSubsysType) hostdev->source.subsys.type) { case VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_PCI: qemuDomainRemovePCIHostDevice(driver, vm, hostdev); diff --git a/src/util/virhostdev.c b/src/util/virhostdev.c new file mode 100644 index 0000000..9147894 --- /dev/null +++ b/src/util/virhostdev.c @@ -0,0 +1,1671 @@ +/* virhostdev.c: hostdev management + * + * Copyright (C) 2013 SUSE LINUX Products GmbH, Nuernberg, Germany. + * Copyright (C) 2006-2007, 2009-2013 Red Hat, Inc. + * Copyright (C) 2006 Daniel P. Berrange + * + * This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public + * License as published by the Free Software Foundation; either + * version 2.1 of the License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this library. If not, see + * <http://www.gnu.org/licenses/>. + * + * Author: Chunyan Liu <cyliu@suse.com> + * Author: Daniel P. Berrange <berrange@redhat.com> + */ + +#include <config.h> + +#include <dirent.h> +#include <fcntl.h> +#include <sys/ioctl.h> +#include <sys/types.h> +#include <sys/stat.h> +#include <unistd.h> +#include <stdlib.h> +#include <stdio.h> + +#include "virhostdev.h" +#include "viralloc.h" +#include "virstring.h" +#include "virfile.h" +#include "virerror.h" +#include "virlog.h" +#include "virpci.h" +#include "virusb.h" +#include "virscsi.h" +#include "virnetdev.h" +#include "virutil.h" +#include "configmake.h" + +#define VIR_FROM_THIS VIR_FROM_NONE + +#define HOSTDEV_STATE_DIR LOCALSTATEDIR "/run/libvirt/hostdevmgr" + +/* for upgrade, may need to find netconfig file in old qemu state dir */ +#define QEMU_STATE_DIR LOCALSTATEDIR "/run/libvirt/qemu" + +struct _virHostdevManager{ + char *stateDir; + + virPCIDeviceListPtr activePciHostdevs; + virPCIDeviceListPtr inactivePciHostdevs; + virUSBDeviceListPtr activeUsbHostdevs; + virSCSIDeviceListPtr activeScsiHostdevs; +}; + +static virHostdevManagerPtr hostdevMgr; + +static void +virHostdevManagerCleanup(void) +{ + if (!hostdevMgr) + return; + + virObjectUnref(hostdevMgr->activePciHostdevs); + virObjectUnref(hostdevMgr->inactivePciHostdevs); + virObjectUnref(hostdevMgr->activeUsbHostdevs); + VIR_FREE(hostdevMgr->stateDir); + + VIR_FREE(hostdevMgr); +} + +static int +virHostdevOnceInit(void) +{ + if (VIR_ALLOC(hostdevMgr) < 0) + goto error; + + if ((hostdevMgr->activePciHostdevs = virPCIDeviceListNew()) == NULL) + goto error; + + if ((hostdevMgr->activeUsbHostdevs = virUSBDeviceListNew()) == NULL) + goto error; + + if ((hostdevMgr->inactivePciHostdevs = virPCIDeviceListNew()) == NULL) + goto error; + + if ((hostdevMgr->activeScsiHostdevs = virSCSIDeviceListNew()) == NULL) + goto error; + + if (VIR_STRDUP(hostdevMgr->stateDir, HOSTDEV_STATE_DIR) < 0) + goto error; + + if (virFileMakePath(hostdevMgr->stateDir) < 0) { + virReportError(VIR_ERR_OPERATION_FAILED, + _("Failed to create state dir '%s'"), + hostdevMgr->stateDir); + goto error; + } + + return 0; + +error: + virHostdevManagerCleanup(); + return -1; +} + +VIR_ONCE_GLOBAL_INIT(virHostdev) + +virHostdevManagerPtr +virHostdevManagerGetDefault(void) +{ + if (virHostdevInitialize() < 0) + return NULL; + return hostdevMgr; +} + +static int +virHostdevPciSysfsPath(virDomainHostdevDefPtr hostdev, char **sysfs_path) +{ + virPCIDeviceAddress config_address; + + config_address.domain = hostdev->source.subsys.u.pci.addr.domain; + config_address.bus = hostdev->source.subsys.u.pci.addr.bus; + config_address.slot = hostdev->source.subsys.u.pci.addr.slot; + config_address.function = hostdev->source.subsys.u.pci.addr.function; + + return virPCIDeviceAddressGetSysfsFile(&config_address, sysfs_path); +} + +static int +virHostdevIsVirtualFunction(virDomainHostdevDefPtr hostdev) +{ + char *sysfs_path = NULL; + int ret = -1; + + if (virHostdevPciSysfsPath(hostdev, &sysfs_path) < 0) + return ret; + + ret = virPCIIsVirtualFunction(sysfs_path); + + VIR_FREE(sysfs_path); + + return ret; +} + +static int +virHostdevNetDevice(virDomainHostdevDefPtr hostdev, + char **linkdev, + int *vf) +{ + int ret = -1; + char *sysfs_path = NULL; + + if (virHostdevPciSysfsPath(hostdev, &sysfs_path) < 0) + return ret; + + if (virPCIIsVirtualFunction(sysfs_path) == 1) { + if (virPCIGetVirtualFunctionInfo(sysfs_path, linkdev, vf) < 0) + goto cleanup; + } else { + if (virPCIGetNetName(sysfs_path, linkdev) < 0) + goto cleanup; + *vf = -1; + } + + ret = 0; + +cleanup: + VIR_FREE(sysfs_path); + + return ret; +} + +static int +virHostdevNetConfigVirtPortProfile(const char *linkdev, int vf, + virNetDevVPortProfilePtr virtPort, + const virMacAddr *macaddr, + const unsigned char *uuid, + int associate) +{ + int ret = -1; + + if (!virtPort) + return ret; + + switch (virtPort->virtPortType) { + case VIR_NETDEV_VPORT_PROFILE_NONE: + case VIR_NETDEV_VPORT_PROFILE_OPENVSWITCH: + case VIR_NETDEV_VPORT_PROFILE_8021QBG: + case VIR_NETDEV_VPORT_PROFILE_LAST: + virReportError(VIR_ERR_CONFIG_UNSUPPORTED, + _("virtualport type %s is " + "currently not supported on interfaces of type " + "hostdev"), + virNetDevVPortTypeToString(virtPort->virtPortType)); + break; + + case VIR_NETDEV_VPORT_PROFILE_8021QBH: + if (associate) + ret = virNetDevVPortProfileAssociate(NULL, virtPort, macaddr, + linkdev, vf, uuid, + VIR_NETDEV_VPORT_PROFILE_OP_CREATE, false); + else + ret = virNetDevVPortProfileDisassociate(NULL, virtPort, + macaddr, linkdev, vf, + VIR_NETDEV_VPORT_PROFILE_OP_DESTROY); + break; + } + + return ret; +} + +static int +virHostdevNetConfigReplace(virDomainHostdevDefPtr hostdev, + const unsigned char *uuid, + char *stateDir) +{ + char *linkdev = NULL; + virNetDevVlanPtr vlan; + virNetDevVPortProfilePtr virtPort; + int ret = -1; + int vf = -1; + int vlanid = -1; + int port_profile_associate = 1; + int isvf; + + isvf = virHostdevIsVirtualFunction(hostdev); + if (isvf <= 0) { + virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s", + _("Interface type hostdev is currently supported on " + "SR-IOV Virtual Functions only")); + return ret; + } + + if (virHostdevNetDevice(hostdev, &linkdev, &vf) < 0) + return ret; + + vlan = virDomainNetGetActualVlan(hostdev->parent.data.net); + virtPort = virDomainNetGetActualVirtPortProfile(hostdev->parent.data.net); + if (virtPort) { + if (vlan) { + virReportError(VIR_ERR_CONFIG_UNSUPPORTED, + _("direct setting of the vlan tag is not allowed " + "for hostdev devices using %s mode"), + virNetDevVPortTypeToString(virtPort->virtPortType)); + goto cleanup; + } + ret = virHostdevNetConfigVirtPortProfile(linkdev, vf, + virtPort, + &hostdev->parent.data.net->mac, + uuid, + port_profile_associate); + } else { + /* Set only mac and vlan */ + if (vlan) { + if (vlan->nTags != 1 || vlan->trunk) { + virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s", + _("vlan trunking is not supported " + "by SR-IOV network devices")); + goto cleanup; + } + if (vf == -1) { + virReportError(VIR_ERR_CONFIG_UNSUPPORTED, + _("vlan can only be set for SR-IOV VFs, but " + "%s is not a VF"), linkdev); + goto cleanup; + } + vlanid = vlan->tag[0]; + } else if (vf >= 0) { + vlanid = 0; /* assure any current vlan tag is reset */ + } + + ret = virNetDevReplaceNetConfig(linkdev, vf, + &hostdev->parent.data.net->mac, + vlanid, stateDir); + } +cleanup: + VIR_FREE(linkdev); + return ret; +} + +/* oldStateDir: + * For upgrade, if there is an existing VM on QEMU, the hostdev netconfig file + * is previously stored in /var/run/libvirt/qemu. With new version, it tries to + * find in hostdevManager->stateDir location but certainly it cannot find it. In + * this case, we should find in the old state dir. + */ +static int +virHostdevNetConfigRestore(virDomainHostdevDefPtr hostdev, + char *stateDir, + char *oldStateDir) +{ + char *linkdev = NULL; + virNetDevVPortProfilePtr virtPort; + int ret = -1; + int vf = -1; + int port_profile_associate = 0; + int isvf; + + /* This is only needed for PCI devices that have been defined + * using <interface type='hostdev'>. For all others, it is a NOP. + */ + if (hostdev->mode != VIR_DOMAIN_HOSTDEV_MODE_SUBSYS || + hostdev->source.subsys.type != VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_PCI || + hostdev->parent.type != VIR_DOMAIN_DEVICE_NET || + !hostdev->parent.data.net) + return 0; + + isvf = virHostdevIsVirtualFunction(hostdev); + if (isvf <= 0) { + virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s", + _("Interface type hostdev is currently supported on " + "SR-IOV Virtual Functions only")); + return ret; + } + + if (virHostdevNetDevice(hostdev, &linkdev, &vf) < 0) + return ret; + + virtPort = virDomainNetGetActualVirtPortProfile(hostdev->parent.data.net); + if (virtPort) + ret = virHostdevNetConfigVirtPortProfile(linkdev, vf, virtPort, + &hostdev->parent.data.net->mac, + NULL, port_profile_associate); + else { + ret = virNetDevRestoreNetConfig(linkdev, vf, stateDir); + if (ret < 0 && oldStateDir != NULL) + ret = virNetDevRestoreNetConfig(linkdev, vf, oldStateDir); + } + + VIR_FREE(linkdev); + + return ret; +} + +static virPCIDeviceListPtr +virHostdevGetPciHostDeviceList(virDomainHostdevDefPtr *hostdevs, int nhostdevs) +{ + virPCIDeviceListPtr list; + size_t i; + + if (!(list = virPCIDeviceListNew())) + return NULL; + + for (i = 0; i < nhostdevs; i++) { + virDomainHostdevDefPtr hostdev = hostdevs[i]; + virPCIDevicePtr dev; + + if (hostdev->mode != VIR_DOMAIN_HOSTDEV_MODE_SUBSYS) + continue; + if (hostdev->source.subsys.type != VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_PCI) + continue; + + dev = virPCIDeviceNew(hostdev->source.subsys.u.pci.addr.domain, + hostdev->source.subsys.u.pci.addr.bus, + hostdev->source.subsys.u.pci.addr.slot, + hostdev->source.subsys.u.pci.addr.function); + if (!dev) { + virObjectUnref(list); + return NULL; + } + + if (virPCIDeviceListAdd(list, dev) < 0) { + virPCIDeviceFree(dev); + virObjectUnref(list); + return NULL; + } + + virPCIDeviceSetManaged(dev, hostdev->managed); + + switch (hostdev->source.subsys.u.pci.backend) { + case VIR_DOMAIN_HOSTDEV_PCI_BACKEND_VFIO: + if (virPCIDeviceSetStubDriver(dev, "vfio-pci") < 0) { + virObjectUnref(list); + return NULL; + } + break; + + case VIR_DOMAIN_HOSTDEV_PCI_BACKEND_XEN : + if (virPCIDeviceSetStubDriver(dev, "pciback") < 0) { + virObjectUnref(list); + return NULL; + } + break; + + case VIR_DOMAIN_HOSTDEV_PCI_BACKEND_KVM : + case VIR_DOMAIN_HOSTDEV_PCI_BACKEND_DEFAULT: + if (virPCIDeviceSetStubDriver(dev, "pci-stub") < 0) { + virObjectUnref(list); + return NULL; + } + break; + } + } + + return list; +} + +bool +virHostdevHostSupportsPassthroughVFIO(void) +{ + DIR *iommuDir = NULL; + struct dirent *iommuGroup = NULL; + bool ret = false; + + /* condition 1 - /sys/kernel/iommu_groups/ contains entries */ + if (!(iommuDir = opendir("/sys/kernel/iommu_groups/"))) + goto cleanup; + + while ((iommuGroup = readdir(iommuDir))) { + /* skip ./ ../ */ + if (STRPREFIX(iommuGroup->d_name, ".")) + continue; + + /* assume we found a group */ + break; + } + + if (!iommuGroup) + goto cleanup; + /* okay, iommu is on and recognizes groups */ + + /* condition 2 - /dev/vfio/vfio exists */ + if (!virFileExists("/dev/vfio/vfio")) + goto cleanup; + + ret = true; + +cleanup: + if (iommuDir) + closedir(iommuDir); + + return ret; +} + + +#if HAVE_LINUX_KVM_H +# include <linux/kvm.h> +static bool +virHostdevHostSupportsPassthroughKVM(void) +{ + int kvmfd = -1; + bool ret = false; + + if ((kvmfd = open("/dev/kvm", O_RDONLY)) < 0) + goto cleanup; + +# ifdef KVM_CAP_IOMMU + if ((ioctl(kvmfd, KVM_CHECK_EXTENSION, KVM_CAP_IOMMU)) <= 0)
This should be '< 0'.
+ goto cleanup; + + ret = true; +# endif + +cleanup: + VIR_FORCE_CLOSE(kvmfd); + + return ret; +} +#else +static bool +virHostdevHostSupportsPassthroughKVM(void) +{ + return false; +} +#endif + +static bool +virHostdevPCICheckSupport(virDomainHostdevDefPtr *hostdevs, + size_t nhostdevs) +{ + bool supportsPassthroughVFIO = virHostdevHostSupportsPassthroughVFIO(); + bool supportsPassthroughKVM = virHostdevHostSupportsPassthroughKVM(); + size_t i; + + /* assign defaults for hostdev passthrough */ + for (i = 0; i < nhostdevs; i++) { + virDomainHostdevDefPtr hostdev = hostdevs[i]; + int *backend = &hostdev->source.subsys.u.pci.backend; + + if (hostdev->mode != VIR_DOMAIN_HOSTDEV_MODE_SUBSYS) + continue; + if (hostdev->source.subsys.type != VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_PCI) + continue; + + switch ((virDomainHostdevSubsysPciBackendType) *backend) { + case VIR_DOMAIN_HOSTDEV_PCI_BACKEND_VFIO: + if (!supportsPassthroughVFIO) { + virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s", + _("host doesn't support VFIO PCI passthrough")); + return false; + } + break; + + case VIR_DOMAIN_HOSTDEV_PCI_BACKEND_DEFAULT: + case VIR_DOMAIN_HOSTDEV_PCI_BACKEND_KVM: + if (!supportsPassthroughKVM) { + virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s", + _("host doesn't support legacy PCI passthrough")); + return false; + } + + break; + + default: + break; + } + } + + return true; +} +int +virHostdevPreparePciHostdevs(virHostdevManagerPtr mgr, + const char *drv_name, + const char *dom_name, + const unsigned char *uuid, + virDomainHostdevDefPtr *hostdevs, + int nhostdevs, + unsigned int flags) +{ + virPCIDeviceListPtr pcidevs = NULL; + int last_processed_hostdev_vf = -1; + size_t i; + int ret = -1; + + virObjectLock(mgr->activePciHostdevs); + virObjectLock(mgr->inactivePciHostdevs); + + if (!virHostdevPCICheckSupport(hostdevs, nhostdevs)) + goto cleanup; + + if (!(pcidevs = virHostdevGetPciHostDeviceList(hostdevs, nhostdevs))) + goto cleanup; + + /* We have to use 9 loops here. *All* devices must + * be detached before we reset any of them, because + * in some cases you have to reset the whole PCI, + * which impacts all devices on it. Also, all devices + * must be reset before being marked as active. + */ + + /* Loop 1: validate that non-managed device isn't in use, eg + * by checking that device is either un-bound, or bound + * to stub driver + */ + + for (i = 0; i < virPCIDeviceListCount(pcidevs); i++) { + virPCIDevicePtr dev = virPCIDeviceListGet(pcidevs, i); + virPCIDevicePtr other; + bool strict_acs_check = (flags & VIR_STRICT_ACS_CHECK)?true:false;
Needs some whitespace, e.g. bool coldBoot = (flags & VIR_COLD_BOOT) ? true : false;
+ + if (!virPCIDeviceIsAssignable(dev, strict_acs_check)) { + virReportError(VIR_ERR_OPERATION_INVALID, + _("PCI device %s is not assignable"), + virPCIDeviceGetName(dev)); + goto cleanup; + } + /* The device is in use by other active domain if + * the dev is in list activePciHostdevs. + */ + if ((other = virPCIDeviceListFind(mgr->activePciHostdevs, dev))) { + const char *other_drvname; + const char *other_domname; + + virPCIDeviceGetUsedBy(other, &other_drvname, &other_domname); + if (other_drvname && other_domname) + virReportError(VIR_ERR_OPERATION_INVALID, + _("PCI device %s is in use by driver %s,domain %s"), + virPCIDeviceGetName(dev), other_drvname, + other_domname); + else + virReportError(VIR_ERR_OPERATION_INVALID, + _("PCI device %s is already in use"), + virPCIDeviceGetName(dev)); + goto cleanup; + } + } + + /* Loop 2: detach managed devices */ + for (i = 0; i < virPCIDeviceListCount(pcidevs); i++) { + virPCIDevicePtr dev = virPCIDeviceListGet(pcidevs, i); + if (virPCIDeviceGetManaged(dev) && + virPCIDeviceDetach(dev, mgr->activePciHostdevs, NULL) < 0) + goto reattachdevs; + } + + /* Loop 3: Now that all the PCI hostdevs have been detached, we + * can safely reset them */ + for (i = 0; i < virPCIDeviceListCount(pcidevs); i++) { + virPCIDevicePtr dev = virPCIDeviceListGet(pcidevs, i); + if (virPCIDeviceReset(dev, mgr->activePciHostdevs, + mgr->inactivePciHostdevs) < 0) + goto reattachdevs; + } + + /* Loop 4: For SRIOV network devices, Now that we have detached the + * the network device, set the netdev config */ + for (i = 0; i < nhostdevs; i++) { + virDomainHostdevDefPtr hostdev = hostdevs[i]; + if (hostdev->mode != VIR_DOMAIN_HOSTDEV_MODE_SUBSYS) + continue; + if (hostdev->source.subsys.type != VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_PCI) + continue; + if (hostdev->parent.type == VIR_DOMAIN_DEVICE_NET && + hostdev->parent.data.net) { + if (virHostdevNetConfigReplace(hostdev, uuid, mgr->stateDir) < 0) + goto resetvfnetconfig; + } + last_processed_hostdev_vf = i; + } + + /* Loop 5: Now mark all the devices as active */ + for (i = 0; i < virPCIDeviceListCount(pcidevs); i++) { + virPCIDevicePtr dev = virPCIDeviceListGet(pcidevs, i); + if (virPCIDeviceListAdd(mgr->activePciHostdevs, dev) < 0) + goto inactivedevs; + } + + /* Loop 6: Now remove the devices from inactive list. */ + for (i = 0; i < virPCIDeviceListCount(pcidevs); i++) { + virPCIDevicePtr dev = virPCIDeviceListGet(pcidevs, i); + virPCIDeviceListDel(mgr->inactivePciHostdevs, dev); + } + + /* Loop 7: Now set the used_by_domain of the device in + * driver->activePciHostdevs as domain name. + */ + for (i = 0; i < virPCIDeviceListCount(pcidevs); i++) { + virPCIDevicePtr dev, activeDev; + + dev = virPCIDeviceListGet(pcidevs, i); + activeDev = virPCIDeviceListFind(mgr->activePciHostdevs, dev); + + if (activeDev) + virPCIDeviceSetUsedBy(activeDev, drv_name, dom_name); + } + + /* Loop 8: Now set the original states for hostdev def */ + for (i = 0; i < nhostdevs; i++) { + virPCIDevicePtr dev; + virPCIDevicePtr pcidev; + virDomainHostdevDefPtr hostdev = hostdevs[i]; + + if (hostdev->mode != VIR_DOMAIN_HOSTDEV_MODE_SUBSYS) + continue; + if (hostdev->source.subsys.type != VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_PCI) + continue; + + dev = virPCIDeviceNew(hostdev->source.subsys.u.pci.addr.domain, + hostdev->source.subsys.u.pci.addr.bus, + hostdev->source.subsys.u.pci.addr.slot, + hostdev->source.subsys.u.pci.addr.function); + + /* original states "unbind_from_stub", "remove_slot", + * "reprobe" were already set by pciDettachDevice in + * loop 2. + */ + if ((pcidev = virPCIDeviceListFind(pcidevs, dev))) { + hostdev->origstates.states.pci.unbind_from_stub = + virPCIDeviceGetUnbindFromStub(pcidev); + hostdev->origstates.states.pci.remove_slot = + virPCIDeviceGetRemoveSlot(pcidev); + hostdev->origstates.states.pci.reprobe = + virPCIDeviceGetReprobe(pcidev); + } + + virPCIDeviceFree(dev); + } + + /* Loop 9: Now steal all the devices from pcidevs */ + while (virPCIDeviceListCount(pcidevs) > 0) + virPCIDeviceListStealIndex(pcidevs, 0); + + ret = 0; + goto cleanup; + +inactivedevs: + /* Only steal all the devices from driver->activePciHostdevs. We will + * free them in virObjectUnref(). + */ + while (virPCIDeviceListCount(pcidevs) > 0) { + virPCIDevicePtr dev = virPCIDeviceListGet(pcidevs, 0); + virPCIDeviceListSteal(mgr->activePciHostdevs, dev); + } + +resetvfnetconfig: + for (i = 0; + last_processed_hostdev_vf != -1 && i < last_processed_hostdev_vf; i++) + virHostdevNetConfigRestore(hostdevs[i], mgr->stateDir, NULL); + +reattachdevs: + for (i = 0; i < virPCIDeviceListCount(pcidevs); i++) { + virPCIDevicePtr dev = virPCIDeviceListGet(pcidevs, i); + virPCIDeviceReattach(dev, mgr->activePciHostdevs, NULL); + } + +cleanup: + virObjectUnlock(mgr->activePciHostdevs); + virObjectUnlock(mgr->inactivePciHostdevs); + virObjectUnref(pcidevs); + return ret; +} + +static int +virHostdevFindUSBDevice(virDomainHostdevDefPtr hostdev, + bool mandatory, + virUSBDevicePtr *usb) +{ + unsigned vendor = hostdev->source.subsys.u.usb.vendor; + unsigned product = hostdev->source.subsys.u.usb.product; + unsigned bus = hostdev->source.subsys.u.usb.bus; + unsigned device = hostdev->source.subsys.u.usb.device; + bool autoAddress = hostdev->source.subsys.u.usb.autoAddress; + int rc; + + *usb = NULL; + + if (vendor && bus) { + rc = virUSBDeviceFind(vendor, product, bus, device, + NULL, + autoAddress ? false : mandatory, + usb); + if (rc < 0) { + return -1; + } else if (!autoAddress) { + goto out; + } else { + VIR_INFO("USB device %x:%x could not be found at previous" + " address (bus:%u device:%u)", + vendor, product, bus, device); + } + } + + /* When vendor is specified, its USB address is either unspecified or the + * device could not be found at the USB device where it had been + * automatically found before. + */ + if (vendor) { + virUSBDeviceListPtr devs; + + rc = virUSBDeviceFindByVendor(vendor, product, NULL, mandatory, &devs); + if (rc < 0) + return -1; + + if (rc == 1) { + *usb = virUSBDeviceListGet(devs, 0); + virUSBDeviceListSteal(devs, *usb); + } + virObjectUnref(devs); + + if (rc == 0) { + goto out; + } else if (rc > 1) { + if (autoAddress) { + virReportError(VIR_ERR_OPERATION_FAILED, + _("Multiple USB devices for %x:%x were found, " + "but none of them is at bus:%u device:%u"), + vendor, product, bus, device); + } else { + virReportError(VIR_ERR_OPERATION_FAILED, + _("Multiple USB devices for %x:%x, " + "use <address> to specify one"), + vendor, product); + } + return -1; + } + + hostdev->source.subsys.u.usb.bus = virUSBDeviceGetBus(*usb); + hostdev->source.subsys.u.usb.device = virUSBDeviceGetDevno(*usb); + hostdev->source.subsys.u.usb.autoAddress = true; + + if (autoAddress) { + VIR_INFO("USB device %x:%x found at bus:%u device:%u (moved" + " from bus:%u device:%u)", + vendor, product, + hostdev->source.subsys.u.usb.bus, + hostdev->source.subsys.u.usb.device, + bus, device); + } + } else if (!vendor && bus) { + if (virUSBDeviceFindByBus(bus, device, NULL, mandatory, usb) < 0) + return -1; + } + +out: + if (!*usb) + hostdev->missing = true; + return 0; +} + +static int +virHostdevMarkUsbHostdevs(virHostdevManagerPtr mgr, + const char *drv_name, + const char *dom_name, + virUSBDeviceListPtr list) +{ + size_t i, j; + unsigned int count; + virUSBDevicePtr tmp; + + virObjectLock(mgr->activeUsbHostdevs); + count = virUSBDeviceListCount(list); + + for (i = 0; i < count; i++) { + virUSBDevicePtr usb = virUSBDeviceListGet(list, i); + if ((tmp = virUSBDeviceListFind(mgr->activeUsbHostdevs, usb))) { + const char *other_drvname; + const char *other_domname; + + virUSBDeviceGetUsedBy(tmp, &other_drvname, &other_domname); + if (other_drvname && other_domname) + virReportError(VIR_ERR_OPERATION_INVALID, + _("USB device %s is in use by " + "driver %s,domain %s"), + virUSBDeviceGetName(tmp), + other_drvname, other_domname); + else + virReportError(VIR_ERR_OPERATION_INVALID, + _("USB device %s is already in use"), + virUSBDeviceGetName(tmp)); + goto error; + } + + virUSBDeviceSetUsedBy(usb, drv_name, dom_name); + VIR_DEBUG("Adding %03d.%03d driver= %s dom=%s to activeUsbHostdevs", + virUSBDeviceGetBus(usb), virUSBDeviceGetDevno(usb), + drv_name, dom_name); + /* + * The caller is responsible to steal these usb devices + * from the virUSBDeviceList that passed in on success, + * perform rollback on failure. + */ + if (virUSBDeviceListAdd(mgr->activeUsbHostdevs, usb) < 0) + goto error; + } + + virObjectUnlock(mgr->activeUsbHostdevs); + return 0; + +error: + for (j = 0; j < i; j++) { + tmp = virUSBDeviceListGet(list, j); + virUSBDeviceListSteal(mgr->activeUsbHostdevs, tmp); + } + virObjectUnlock(mgr->activeUsbHostdevs); + return -1; +} + +int +virHostdevPrepareUsbHostdevs(virHostdevManagerPtr mgr, + const char *drv_name, + const char *dom_name, + virDomainHostdevDefPtr *hostdevs, + int nhostdevs, + bool coldBoot) +{ + size_t i; + int ret = -1; + virUSBDeviceListPtr list; + virUSBDevicePtr tmp; + + /* To prevent situation where USB device is assigned to two domains + * we need to keep a list of currently assigned USB devices. + * This is done in several loops which cannot be joined into one + * big loop. + */ + if (!(list = virUSBDeviceListNew())) + goto cleanup; + + /* Loop 1: build temporary list + */ + for (i = 0; i < nhostdevs; i++) { + virDomainHostdevDefPtr hostdev = hostdevs[i]; + bool required = true; + virUSBDevicePtr usb; + + if (hostdev->mode != VIR_DOMAIN_HOSTDEV_MODE_SUBSYS) + continue; + if (hostdev->source.subsys.type != VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_USB) + continue; + + if (hostdev->startupPolicy == VIR_DOMAIN_STARTUP_POLICY_OPTIONAL || + (hostdev->startupPolicy == VIR_DOMAIN_STARTUP_POLICY_REQUISITE && + !coldBoot)) + required = false; + + if (virHostdevFindUSBDevice(hostdev, required, &usb) < 0) + goto cleanup; + + if (usb && virUSBDeviceListAdd(list, usb) < 0) { + virUSBDeviceFree(usb); + goto cleanup; + } + } + + /* Mark devices in temporary list as used by @name + * and add them do active list. However, if something goes + * wrong, perform rollback. + */ + if (virHostdevMarkUsbHostdevs(mgr, drv_name, dom_name, list) < 0) + goto cleanup; + + /* Loop 2: Temporary list was successfully merged with + * active list, so steal all items to avoid freeing them + * in cleanup label. + */ + while (virUSBDeviceListCount(list) > 0) { + tmp = virUSBDeviceListGet(list, 0); + virUSBDeviceListSteal(list, tmp); + } + + ret = 0; + +cleanup: + virObjectUnref(list); + return ret; +} + +int +virHostdevPrepareScsiHostdevs(virHostdevManagerPtr mgr, + const char *drv_name, + const char *dom_name, + virDomainHostdevDefPtr *hostdevs, + int nhostdevs) +{ + size_t i, j; + int count; + virSCSIDeviceListPtr list; + virSCSIDevicePtr tmp; + + /* To prevent situation where SCSI device is assigned to two domains + * we need to keep a list of currently assigned SCSI devices. + */ + if (!(list = virSCSIDeviceListNew())) + goto cleanup; + + /* Loop 1: build temporary list */ + for (i = 0; i < nhostdevs; i++) { + virDomainHostdevDefPtr hostdev = hostdevs[i]; + virSCSIDevicePtr scsi; + + if (hostdev->mode != VIR_DOMAIN_HOSTDEV_MODE_SUBSYS || + hostdev->source.subsys.type != VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_SCSI) + continue; + + if (hostdev->managed) { + virReportError(VIR_ERR_XML_ERROR, "%s", + _("SCSI host device doesn't support managed mode")); + goto cleanup; + } + + if (!(scsi = virSCSIDeviceNew(hostdev->source.subsys.u.scsi.adapter, + hostdev->source.subsys.u.scsi.bus, + hostdev->source.subsys.u.scsi.target, + hostdev->source.subsys.u.scsi.unit, + hostdev->readonly))) + goto cleanup; + + if (scsi && virSCSIDeviceListAdd(list, scsi) < 0) { + virSCSIDeviceFree(scsi); + goto cleanup; + } + } + + /* Loop 2: Mark devices in temporary list as used by + * and add them to driver list. However, if something goes + * wrong, perform rollback. + */ + virObjectLock(mgr->activeScsiHostdevs); + count = virSCSIDeviceListCount(list); + + for (i = 0; i < count; i++) { + virSCSIDevicePtr scsi = virSCSIDeviceListGet(list, i); + if ((tmp = virSCSIDeviceListFind(mgr->activeScsiHostdevs, scsi))) { + const char *other_drvname; + const char *other_domname; + + virSCSIDeviceGetUsedBy(tmp, &other_drvname, &other_domname); + if (other_drvname && other_domname) + virReportError(VIR_ERR_OPERATION_INVALID, + _("SCSI device %s is in use by " + "driver %s domain %s"), + virSCSIDeviceGetName(tmp), + other_drvname, other_domname); + else + virReportError(VIR_ERR_OPERATION_INVALID, + _("SCSI device %s is already in use"), + virSCSIDeviceGetName(tmp)); + goto error; + } + + virSCSIDeviceSetUsedBy(scsi, drv_name, dom_name); + VIR_DEBUG("Adding %s to activeScsiHostdevs", virSCSIDeviceGetName(scsi)); + + if (virSCSIDeviceListAdd(mgr->activeScsiHostdevs, scsi) < 0) + goto error; + } + + virObjectUnlock(mgr->activeScsiHostdevs); + + /* Loop 3: Temporary list was successfully merged with + * driver list, so steal all items to avoid freeing them + * when freeing temporary list. + */ + while (virSCSIDeviceListCount(list) > 0) { + tmp = virSCSIDeviceListGet(list, 0); + virSCSIDeviceListSteal(list, tmp); + } + + virObjectUnref(list); + return 0; + +error: + for (j = 0; j < i; j++) { + tmp = virSCSIDeviceListGet(list, j); + virSCSIDeviceListSteal(mgr->activeScsiHostdevs, tmp); + } + virObjectUnlock(mgr->activeScsiHostdevs); +cleanup: + virObjectUnref(list); + return -1; +} + +int +virHostdevPrepareDomainHostdevs(virHostdevManagerPtr mgr, + const char *driver, + virDomainDefPtr def, + unsigned int flags) +{ + if (!def->nhostdevs) + return 0; + + if (flags & VIR_SP_PCI_HOSTDEV) { + if (virHostdevPreparePciHostdevs(mgr, driver, + def->name, def->uuid, + def->hostdevs, + def->nhostdevs, + flags) < 0) + return -1; + } + + if (flags & VIR_SP_USB_HOSTDEV) { + bool coldBoot = (flags & VIR_COLD_BOOT)?true:false; + if (virHostdevPrepareUsbHostdevs(mgr, driver, def->name, + def->hostdevs, def->nhostdevs, + coldBoot) < 0) + return -1; + } + + if (flags & VIR_SP_SCSI_HOSTDEV) { + if (virHostdevPrepareScsiHostdevs(mgr, driver, def->name, + def->hostdevs, def->nhostdevs) < 0) + return -1; + } + + return 0; +} + +/* + * Pre-condition: mgr->inactivePciHostdevs & mgr->activePciHostdevs + * are locked + */ +static void +virHostdevReAttachPciDevice(virHostdevManagerPtr mgr, virPCIDevicePtr dev) +{ + /* If the device is not managed and was attached to guest + * successfully, it must have been inactive. + */ + if (!virPCIDeviceGetManaged(dev)) { + if (virPCIDeviceListAdd(mgr->inactivePciHostdevs, dev) < 0) + virPCIDeviceFree(dev); + return; + } + + /* Wait for device cleanup if it is qemu/kvm */ + if (STREQ(virPCIDeviceGetStubDriver(dev), "pci-stub")) { + int retries = 100; + while (virPCIDeviceWaitForCleanup(dev, "kvm_assigned_device") + && retries) { + usleep(100*1000); + retries--; + } + } + + if (virPCIDeviceReattach(dev, mgr->activePciHostdevs, + mgr->inactivePciHostdevs) < 0) { + virErrorPtr err = virGetLastError(); + VIR_ERROR(_("Failed to re-attach PCI device: %s"), + err ? err->message : _("unknown error")); + virResetError(err); + } + virPCIDeviceFree(dev); +} + +/* + * Pre-condition: mgr->activePciHostdevs is locked + */ +static virPCIDeviceListPtr +virHostdevGetActivePciHostDeviceList(virHostdevManagerPtr mgr, + virDomainHostdevDefPtr *hostdevs, + int nhostdevs) +{ + virPCIDeviceListPtr list; + size_t i; + + if (!(list = virPCIDeviceListNew())) + return NULL; + + for (i = 0; i < nhostdevs; i++) { + virDomainHostdevDefPtr hostdev = hostdevs[i]; + virPCIDevicePtr dev; + virPCIDevicePtr activeDev; + + if (hostdev->mode != VIR_DOMAIN_HOSTDEV_MODE_SUBSYS) + continue; + if (hostdev->source.subsys.type != VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_PCI) + continue; + + dev = virPCIDeviceNew(hostdev->source.subsys.u.pci.addr.domain, + hostdev->source.subsys.u.pci.addr.bus, + hostdev->source.subsys.u.pci.addr.slot, + hostdev->source.subsys.u.pci.addr.function); + if (!dev) { + virObjectUnref(list); + return NULL; + } + + if ((activeDev = virPCIDeviceListFind(mgr->activePciHostdevs, dev))) { + if (virPCIDeviceListAdd(list, activeDev) < 0) { + virPCIDeviceFree(dev); + virObjectUnref(list); + return NULL; + } + } + + virPCIDeviceFree(dev); + } + + return list; +} + +int +virHostdevUpdateActivePciHostdevs(virHostdevManagerPtr mgr, + virDomainHostdevDefPtr *hostdevs, + int nhostdevs, + const char *drv_name, + const char *dom_name) +{ + virDomainHostdevDefPtr hostdev = NULL; + virPCIDevicePtr dev = NULL; + size_t i; + int ret = -1; + + if (!nhostdevs) + return 0; + + virObjectLock(mgr->activePciHostdevs); + virObjectLock(mgr->inactivePciHostdevs); + + for (i = 0; i < nhostdevs; i++) { + hostdev = hostdevs[i]; + + if (hostdev->mode != VIR_DOMAIN_HOSTDEV_MODE_SUBSYS) + continue; + if (hostdev->source.subsys.type != VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_PCI) + continue; + + dev = virPCIDeviceNew(hostdev->source.subsys.u.pci.addr.domain, + hostdev->source.subsys.u.pci.addr.bus, + hostdev->source.subsys.u.pci.addr.slot, + hostdev->source.subsys.u.pci.addr.function); + + if (!dev) + goto cleanup; + + virPCIDeviceSetManaged(dev, hostdev->managed); + switch (hostdev->source.subsys.u.pci.backend) { + case VIR_DOMAIN_HOSTDEV_PCI_BACKEND_VFIO: + if (virPCIDeviceSetStubDriver(dev, "vfio-pci") < 0) + goto cleanup; + break; + + case VIR_DOMAIN_HOSTDEV_PCI_BACKEND_XEN : + if (virPCIDeviceSetStubDriver(dev, "pciback") < 0) + goto cleanup; + break; + + case VIR_DOMAIN_HOSTDEV_PCI_BACKEND_KVM : + case VIR_DOMAIN_HOSTDEV_PCI_BACKEND_DEFAULT: + if (virPCIDeviceSetStubDriver(dev, "pci-stub") < 0) + goto cleanup; + break; + } + virPCIDeviceSetUsedBy(dev, drv_name, dom_name); + + /* Setup the original states for the PCI device */ + virPCIDeviceSetUnbindFromStub(dev, hostdev->origstates.states.pci.unbind_from_stub); + virPCIDeviceSetRemoveSlot(dev, hostdev->origstates.states.pci.remove_slot); + virPCIDeviceSetReprobe(dev, hostdev->origstates.states.pci.reprobe); + + if (virPCIDeviceListAdd(mgr->activePciHostdevs, dev) < 0) + goto cleanup; + dev = NULL; + } + + ret = 0; +cleanup: + virPCIDeviceFree(dev); + virObjectUnlock(mgr->activePciHostdevs); + virObjectUnlock(mgr->inactivePciHostdevs); + return ret; +} + + +int +virHostdevUpdateActiveUsbHostdevs(virHostdevManagerPtr mgr, + virDomainHostdevDefPtr *hostdevs, + int nhostdevs, + const char *drv_name, + const char *dom_name) +{ + virDomainHostdevDefPtr hostdev = NULL; + size_t i; + int ret = -1; + + if (!nhostdevs) + return 0; + + virObjectLock(mgr->activeUsbHostdevs); + for (i = 0; i < nhostdevs; i++) { + virUSBDevicePtr usb = NULL; + hostdev = hostdevs[i]; + + if (hostdev->mode != VIR_DOMAIN_HOSTDEV_MODE_SUBSYS) + continue; + if (hostdev->source.subsys.type != VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_USB) + continue; + + usb = virUSBDeviceNew(hostdev->source.subsys.u.usb.bus, + hostdev->source.subsys.u.usb.device, + NULL); + if (!usb) { + VIR_WARN("Unable to reattach USB device %03d.%03d " + "on driver %s domain %s", + hostdev->source.subsys.u.usb.bus, + hostdev->source.subsys.u.usb.device, + drv_name, dom_name); + continue; + } + + virUSBDeviceSetUsedBy(usb, drv_name, dom_name); + + if (virUSBDeviceListAdd(mgr->activeUsbHostdevs, usb) < 0) { + virUSBDeviceFree(usb); + goto cleanup; + } + } + ret = 0; +cleanup: + virObjectUnlock(mgr->activeUsbHostdevs); + return ret; +} + +int +virHostdevUpdateActiveScsiHostdevs(virHostdevManagerPtr mgr, + virDomainHostdevDefPtr *hostdevs, + int nhostdevs, + const char *drv_name, + const char *dom_name) +{ + virDomainHostdevDefPtr hostdev = NULL; + size_t i; + int ret = -1; + + if (!nhostdevs) + return 0; + + virObjectLock(mgr->activeScsiHostdevs); + for (i = 0; i < nhostdevs; i++) { + virSCSIDevicePtr scsi = NULL; + hostdev = hostdevs[i]; + + if (hostdev->mode != VIR_DOMAIN_HOSTDEV_MODE_SUBSYS || + hostdev->source.subsys.type != VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_SCSI) + continue; + + if (!(scsi = virSCSIDeviceNew(hostdev->source.subsys.u.scsi.adapter, + hostdev->source.subsys.u.scsi.bus, + hostdev->source.subsys.u.scsi.target, + hostdev->source.subsys.u.scsi.unit, + hostdev->readonly))) + goto cleanup; + + virSCSIDeviceSetUsedBy(scsi, drv_name, dom_name); + + if (virSCSIDeviceListAdd(mgr->activeScsiHostdevs, scsi) < 0) { + virSCSIDeviceFree(scsi); + goto cleanup; + } + } + ret = 0; + +cleanup: + virObjectUnlock(mgr->activeScsiHostdevs); + return ret; +} + +int +virHostdevUpdateActiveHostdevs(virHostdevManagerPtr mgr, + const char *driver, + virDomainDefPtr def, + unsigned int flags) +{ + if (!def->nhostdevs) + return 0; + + if (flags & VIR_SP_PCI_HOSTDEV) { + if (virHostdevUpdateActivePciHostdevs(mgr, + def->hostdevs, + def->nhostdevs, + driver, def->name) < 0) + return -1; + } + + if (flags & VIR_SP_USB_HOSTDEV) { + if (virHostdevUpdateActiveUsbHostdevs(mgr, + def->hostdevs, + def->nhostdevs, + driver, def->name) < 0) + return -1; + } + + if (flags & VIR_SP_SCSI_HOSTDEV) { + if (virHostdevUpdateActiveScsiHostdevs(mgr, + def->hostdevs, + def->nhostdevs, + driver, def->name) < 0) + return -1; + } + + return 0; +} + + +void +virHostdevReAttachPciHostdevs(virHostdevManagerPtr mgr, + const char *drv_name, + const char *dom_name, + virDomainHostdevDefPtr *hostdevs, + int nhostdevs) +{ + virPCIDeviceListPtr pcidevs; + size_t i; + char *oldStateDir = NULL; + + virObjectLock(mgr->activePciHostdevs); + virObjectLock(mgr->inactivePciHostdevs); + + /* for upgrade, if netconfig file is not found in mgr->stateDir, + * find in old state dir */ + if (VIR_STRDUP(oldStateDir, QEMU_STATE_DIR) < 0) + goto cleanup; + + if (!(pcidevs = virHostdevGetActivePciHostDeviceList(mgr, + hostdevs, + nhostdevs))) { + virErrorPtr err = virGetLastError(); + VIR_ERROR(_("Failed to allocate PCI device list: %s"), + err ? err->message : _("unknown error")); + virResetError(err); + goto cleanup; + } + + /* Again 4 loops; mark all devices as inactive before reset + * them and reset all the devices before re-attach. + * Attach mac and port profile parameters to devices + */ + for (i = 0; i < virPCIDeviceListCount(pcidevs); i++) { + virPCIDevicePtr dev = virPCIDeviceListGet(pcidevs, i); + virPCIDevicePtr activeDev = NULL; + const char *usedby_drvname; + const char *usedby_domname; + + /* Never delete the dev from list driver->activePciHostdevs + * if it's used by other domain. + */ + activeDev = virPCIDeviceListFind(mgr->activePciHostdevs, dev); + if (activeDev) { + virPCIDeviceGetUsedBy(activeDev, &usedby_drvname, &usedby_domname); + if (STRNEQ_NULLABLE(drv_name, usedby_drvname) || + STRNEQ_NULLABLE(dom_name, usedby_domname)) { + virPCIDeviceListSteal(pcidevs, dev); + continue; + } + } + + virPCIDeviceListSteal(mgr->activePciHostdevs, dev); + } + + /* + * For SRIOV net host devices, unset mac and port profile before + * reset and reattach device + */ + for (i = 0; i < nhostdevs; i++) + virHostdevNetConfigRestore(hostdevs[i], mgr->stateDir, oldStateDir); + + for (i = 0; i < virPCIDeviceListCount(pcidevs); i++) { + virPCIDevicePtr dev = virPCIDeviceListGet(pcidevs, i); + if (virPCIDeviceReset(dev, mgr->activePciHostdevs, + mgr->inactivePciHostdevs) < 0) { + virErrorPtr err = virGetLastError(); + VIR_ERROR(_("Failed to reset PCI device: %s"), + err ? err->message : _("unknown error")); + virResetError(err); + } + } + + while (virPCIDeviceListCount(pcidevs) > 0) { + virPCIDevicePtr dev = virPCIDeviceListStealIndex(pcidevs, 0); + virHostdevReAttachPciDevice(mgr, dev); + } + + virObjectUnref(pcidevs); +cleanup: + VIR_FREE(oldStateDir); + virObjectUnlock(mgr->activePciHostdevs); + virObjectUnlock(mgr->inactivePciHostdevs); +} + +void +virHostdevReAttachUsbHostdevs(virHostdevManagerPtr mgr, + const char *drv_name, + const char *dom_name, + virDomainHostdevDefPtr *hostdevs, + int nhostdevs) +{ + size_t i; + + virObjectLock(mgr->activeUsbHostdevs); + for (i = 0; i < nhostdevs; i++) { + virDomainHostdevDefPtr hostdev = hostdevs[i]; + virUSBDevicePtr usb, tmp; + const char *usedby_drvname; + const char *usedby_domname; + + if (hostdev->mode != VIR_DOMAIN_HOSTDEV_MODE_SUBSYS) + continue; + if (hostdev->source.subsys.type != VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_USB) + continue; + if (hostdev->missing) + continue; + + usb = virUSBDeviceNew(hostdev->source.subsys.u.usb.bus, + hostdev->source.subsys.u.usb.device, + NULL); + + if (!usb) { + VIR_WARN("Unable to reattach USB device %03d.%03d " + "on driver %s domain %s", + hostdev->source.subsys.u.usb.bus, + hostdev->source.subsys.u.usb.device, + drv_name, dom_name); + continue; + } + + /* Delete only those USB devices which belongs + * to domain. Therefore we want to steal only + * those devices from the list which were taken + * by domain */ + + tmp = virUSBDeviceListFind(mgr->activeUsbHostdevs, usb); + virUSBDeviceFree(usb); + + if (!tmp) { + VIR_WARN("Unable to find device %03d.%03d " + "in list of active USB devices", + hostdev->source.subsys.u.usb.bus, + hostdev->source.subsys.u.usb.device); + continue; + } + + virUSBDeviceGetUsedBy(tmp, &usedby_drvname, &usedby_domname); + if (STREQ_NULLABLE(drv_name, usedby_drvname) && + STREQ_NULLABLE(dom_name, usedby_domname)) { + VIR_DEBUG("Removing %03d.%03d dom=%s:%s", + hostdev->source.subsys.u.usb.bus, + hostdev->source.subsys.u.usb.device, + drv_name, dom_name); + virUSBDeviceListDel(mgr->activeUsbHostdevs, tmp); + } + + } + + virObjectUnlock(mgr->activeUsbHostdevs); +} + +void +virHostdevReAttachScsiHostdevs(virHostdevManagerPtr mgr, + const char *drv_name, + const char *dom_name, + virDomainHostdevDefPtr *hostdevs, + int nhostdevs) +{ + size_t i; + + virObjectLock(mgr->activeScsiHostdevs); + for (i = 0; i < nhostdevs; i++) { + virDomainHostdevDefPtr hostdev = hostdevs[i]; + virSCSIDevicePtr scsi, tmp; + const char *usedby_drvname; + const char *usedby_domname; + + if (hostdev->mode != VIR_DOMAIN_HOSTDEV_MODE_SUBSYS || + hostdev->source.subsys.type != VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_SCSI) + continue; + + if (!(scsi = virSCSIDeviceNew(hostdev->source.subsys.u.scsi.adapter, + hostdev->source.subsys.u.scsi.bus, + hostdev->source.subsys.u.scsi.target, + hostdev->source.subsys.u.scsi.unit, + hostdev->readonly))) { + VIR_WARN("Unable to reattach SCSI device %s:%d:%d:%d on driver %s domain %s", + hostdev->source.subsys.u.scsi.adapter, + hostdev->source.subsys.u.scsi.bus, + hostdev->source.subsys.u.scsi.target, + hostdev->source.subsys.u.scsi.unit, + drv_name, dom_name); + continue; + } + + tmp = virSCSIDeviceListFind(mgr->activeScsiHostdevs, scsi); + virSCSIDeviceFree(scsi); + + if (!tmp) { + VIR_WARN("Unable to find device %s:%d:%d:%d " + "in list of active SCSI devices", + hostdev->source.subsys.u.scsi.adapter, + hostdev->source.subsys.u.scsi.bus, + hostdev->source.subsys.u.scsi.target, + hostdev->source.subsys.u.scsi.unit); + continue; + } + + virSCSIDeviceGetUsedBy(tmp, &usedby_drvname, &usedby_domname); + if (STREQ_NULLABLE(usedby_drvname, drv_name) && + STREQ_NULLABLE(usedby_domname, dom_name)) { + VIR_DEBUG("Removing %s:%d:%d:%d driver:%s dom:%s from activeScsiHostdevs", + hostdev->source.subsys.u.scsi.adapter, + hostdev->source.subsys.u.scsi.bus, + hostdev->source.subsys.u.scsi.target, + hostdev->source.subsys.u.scsi.unit, + drv_name, dom_name); + virSCSIDeviceListDel(mgr->activeScsiHostdevs, tmp); + } + } + + virObjectUnlock(mgr->activeScsiHostdevs); +} + +void +virHostdevReAttachDomainHostdevs(virHostdevManagerPtr mgr, + const char *driver, + virDomainDefPtr def, + unsigned int flags) +{ + if (!def->nhostdevs) + return; + + if (flags & VIR_SP_PCI_HOSTDEV) { + virHostdevReAttachPciHostdevs(mgr, driver, def->name, + def->hostdevs, def->nhostdevs); + } + + if (flags & VIR_SP_USB_HOSTDEV) { + virHostdevReAttachUsbHostdevs(mgr, driver, def->name, + def->hostdevs, def->nhostdevs); + } + + if (flags & VIR_SP_SCSI_HOSTDEV) { + virHostdevReAttachScsiHostdevs(mgr, driver, def->name, + def->hostdevs, def->nhostdevs); + } +} + +/* following functions are used by NodeDevDetach/Reattach/Reset */ +int +virHostdevPciNodeDeviceDetach(virHostdevManagerPtr mgr, + virPCIDevicePtr pci) +{ + int ret; + + virObjectLock(mgr->activePciHostdevs); + virObjectLock(mgr->inactivePciHostdevs); + if (virPCIDeviceDetach(pci, mgr->activePciHostdevs, + mgr->inactivePciHostdevs) < 0) + ret = -1; + else + ret = 0; + + virObjectUnlock(mgr->inactivePciHostdevs); + virObjectUnlock(mgr->activePciHostdevs); + return ret; +} + +int +virHostdevPciNodeDeviceReAttach(virHostdevManagerPtr mgr, + virPCIDevicePtr pci) +{ + int ret = -1; + + virPCIDevicePtr other; + + virObjectLock(mgr->activePciHostdevs); + virObjectLock(mgr->inactivePciHostdevs); + other = virPCIDeviceListFind(mgr->activePciHostdevs, pci); + if (other) { + const char *other_drvname; + const char *other_domname; + + virPCIDeviceGetUsedBy(other, &other_drvname, &other_domname); + if (other_drvname && other_domname) + virReportError(VIR_ERR_OPERATION_INVALID, + _("PCI device %s is still in use by driver %s, domain %s"), + virPCIDeviceGetName(pci), other_drvname, other_domname); + else + virReportError(VIR_ERR_OPERATION_INVALID, + _("PCI device %s is still in use"), + virPCIDeviceGetName(pci)); + goto out; + } + + virPCIDeviceReattachInit(pci); + + if (virPCIDeviceReattach(pci, mgr->activePciHostdevs, + mgr->inactivePciHostdevs) < 0) + goto out; + + ret = 0; +out: + virObjectUnlock(mgr->inactivePciHostdevs); + virObjectUnlock(mgr->activePciHostdevs); + return ret; +} + +int +virHostdevPciNodeDeviceReset(virHostdevManagerPtr mgr, + virPCIDevicePtr pci) +{ + int ret; + + virObjectLock(mgr->activePciHostdevs); + virObjectLock(mgr->inactivePciHostdevs); + if (virPCIDeviceReset(pci, mgr->activePciHostdevs, + mgr->inactivePciHostdevs) < 0) + ret = -1; + else + ret = 0; + + virObjectUnlock(mgr->inactivePciHostdevs); + virObjectUnlock(mgr->activePciHostdevs); + return ret; +} diff --git a/src/util/virhostdev.h b/src/util/virhostdev.h new file mode 100644 index 0000000..138e634 --- /dev/null +++ b/src/util/virhostdev.h @@ -0,0 +1,129 @@ +/* virhostdev.h: hostdev management + * + * Copyright (C) 2013 SUSE LINUX Products GmbH, Nuernberg, Germany. + * Copyright (C) 2006-2007, 2009-2013 Red Hat, Inc. + * Copyright (C) 2006 Daniel P. Berrange + * + * This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public + * License as published by the Free Software Foundation; either + * version 2.1 of the License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this library. If not, see + * <http://www.gnu.org/licenses/>. + * + * Author: Chunyan Liu <cyliu@suse.com> + * Author: Daniel P. Berrange <berrange@redhat.com> + */ + +#ifndef __VIR_HOSTDEV_H__ +# define __VIR_HOSTDEV_H__ + +# include "internal.h" + +# include "domain_conf.h" +# include "virpci.h" + +typedef enum { + VIR_SP_PCI_HOSTDEV = (1 << 0), /* support pci passthrough */ + VIR_SP_USB_HOSTDEV = (1 << 1), /* support usb passthrough */ + VIR_SP_SCSI_HOSTDEV = (1 << 2), /* support scsi passthrough */ + + VIR_COLD_BOOT = (1 << 8), /* cold boot */ + VIR_STRICT_ACS_CHECK = (1 << 9), /* strict acs check */ +} virHostdevManagerFlag; + +typedef struct _virHostdevManager virHostdevManager; +typedef virHostdevManager *virHostdevManagerPtr; + +struct virHostdevNameList { + char **names; + size_t nnames; +}; +typedef struct virHostdevNameList *virHostdevNameListPtr; + +virHostdevManagerPtr virHostdevManagerGetDefault(void); + +bool virHostdevHostSupportsPassthroughVFIO(void); + +/* functions used to prepare/unprepare hostdevs for domain */ +int virHostdevPrepareDomainHostdevs(virHostdevManagerPtr mgr, + const char *driver, + virDomainDefPtr def, + unsigned int flags); +void virHostdevReAttachDomainHostdevs(virHostdevManagerPtr mgr, + const char *driver, + virDomainDefPtr def, + unsigned int flags); +int virHostdevPreparePciHostdevs(virHostdevManagerPtr mgr, + const char *drv_name, + const char *dom_name, + const unsigned char *uuid, + virDomainHostdevDefPtr *hostdevs, + int nhostdevs, + unsigned int flags); +int virHostdevPrepareUsbHostdevs(virHostdevManagerPtr mgr, + const char *drv_name, + const char *dom_name, + virDomainHostdevDefPtr *hostdevs, + int nhostdevs, + bool coldBoot); +int virHostdevPrepareScsiHostdevs(virHostdevManagerPtr mgr, + const char *drv_name, + const char *dom_name, + virDomainHostdevDefPtr *hostdevs, + int nhostdevs); +void virHostdevReAttachPciHostdevs(virHostdevManagerPtr mgr, + const char *drv_name, + const char *dom_name, + virDomainHostdevDefPtr *hostdevs, + int nhostdevs); +void virHostdevReAttachUsbHostdevs(virHostdevManagerPtr mgr, + const char *drv_name, + const char *dom_name, + virDomainHostdevDefPtr *hostdevs, + int nhostdevs); +void virHostdevReAttachScsiHostdevs(virHostdevManagerPtr mgr, + const char *drv_name, + const char *dom_name, + virDomainHostdevDefPtr *hostdevs, + int nhostdevs); +int +virHostdevUpdateActivePciHostdevs(virHostdevManagerPtr mgr, + virDomainHostdevDefPtr *hostdevs, + int nhostdevs, + const char *drv_name, + const char *dom_name); +int +virHostdevUpdateActiveUsbHostdevs(virHostdevManagerPtr mgr, + virDomainHostdevDefPtr *hostdevs, + int nhostdevs, + const char *drv_name, + const char *dom_name); +int +virHostdevUpdateActiveScsiHostdevs(virHostdevManagerPtr mgr, + virDomainHostdevDefPtr *hostdevs, + int nhostdevs, + const char *drv_name, + const char *dom_name); +int +virHostdevUpdateActiveHostdevs(virHostdevManagerPtr mgr, + const char *driver, + virDomainDefPtr def, + unsigned int flags); + +/* functions used by NodeDevDetach/Reattach/Reset */ +int virHostdevPciNodeDeviceDetach(virHostdevManagerPtr mgr, + virPCIDevicePtr pci); +int virHostdevPciNodeDeviceReAttach(virHostdevManagerPtr mgr, + virPCIDevicePtr pci); +int virHostdevPciNodeDeviceReset(virHostdevManagerPtr mgr, + virPCIDevicePtr pci); + +#endif /* __VIR_HOSTDEV_H__ */ diff --git a/src/util/virpci.c b/src/util/virpci.c index 65d7168..76ba0fe 100644 --- a/src/util/virpci.c +++ b/src/util/virpci.c @@ -62,7 +62,10 @@ struct _virPCIDevice { char name[PCI_ADDR_LEN]; /* domain:bus:slot.function */ char id[PCI_ID_LEN]; /* product vendor */ char *path; - const char *used_by; /* The domain which uses the device */ + + /* The driver:domain which uses the device */ + char *used_by_drvname; + char *used_by_domname;
Whitespace should be consistent with the other structure members.
unsigned int pcie_cap_pos; unsigned int pci_pm_cap_pos; @@ -1572,6 +1575,8 @@ virPCIDeviceFree(virPCIDevicePtr dev) VIR_DEBUG("%s %s: freeing", dev->id, dev->name); VIR_FREE(dev->path); VIR_FREE(dev->stubDriver); + VIR_FREE(dev->used_by_drvname); + VIR_FREE(dev->used_by_domname); VIR_FREE(dev); }
@@ -1641,16 +1646,27 @@ virPCIDeviceSetReprobe(virPCIDevicePtr dev, bool reprobe) dev->reprobe = reprobe; }
-void -virPCIDeviceSetUsedBy(virPCIDevicePtr dev, const char *name) +int +virPCIDeviceSetUsedBy(virPCIDevicePtr dev, + const char *drv_name, + const char *dom_name) { - dev->used_by = name; + if (VIR_STRDUP(dev->used_by_drvname, drv_name) < 0) + return -1; + + if (VIR_STRDUP(dev->used_by_domname, dom_name) < 0) + return -1; + + return 0; }
-const char * -virPCIDeviceGetUsedBy(virPCIDevicePtr dev) +void +virPCIDeviceGetUsedBy(virPCIDevicePtr dev, + const char **drv_name, + const char **dom_name) { - return dev->used_by; + *drv_name = dev->used_by_drvname; + *dom_name = dev->used_by_domname; }
void virPCIDeviceReattachInit(virPCIDevicePtr pci) diff --git a/src/util/virpci.h b/src/util/virpci.h index 0aa6fee..f3f9e08 100644 --- a/src/util/virpci.h +++ b/src/util/virpci.h @@ -65,9 +65,12 @@ unsigned int virPCIDeviceGetManaged(virPCIDevice *dev); int virPCIDeviceSetStubDriver(virPCIDevicePtr dev, const char *driver); const char *virPCIDeviceGetStubDriver(virPCIDevicePtr dev); -void virPCIDeviceSetUsedBy(virPCIDevice *dev, - const char *used_by); -const char *virPCIDeviceGetUsedBy(virPCIDevice *dev); +int virPCIDeviceSetUsedBy(virPCIDevice *dev, + const char *drv_name, + const char *dom_name); +void virPCIDeviceGetUsedBy(virPCIDevice *dev, + const char **drv_name, + const char **dom_name); unsigned int virPCIDeviceGetUnbindFromStub(virPCIDevicePtr dev); void virPCIDeviceSetUnbindFromStub(virPCIDevice *dev, bool unbind); diff --git a/src/util/virscsi.c b/src/util/virscsi.c index 7aca9e6..062e8bd 100644 --- a/src/util/virscsi.c +++ b/src/util/virscsi.c @@ -55,7 +55,10 @@ struct _virSCSIDevice { char *name; /* adapter:bus:target:unit */ char *id; /* model:vendor */ char *sg_path; /* e.g. /dev/sg2 */ - const char *used_by; /* name of the domain using this dev */ + + /* driver:domain using this dev */ + char *used_by_drvname; + char *used_by_domname;
bool readonly; }; @@ -259,20 +262,31 @@ virSCSIDeviceFree(virSCSIDevicePtr dev) VIR_FREE(dev->id); VIR_FREE(dev->name); VIR_FREE(dev->sg_path); + VIR_FREE(dev->used_by_drvname); + VIR_FREE(dev->used_by_domname); VIR_FREE(dev); }
-void +int virSCSIDeviceSetUsedBy(virSCSIDevicePtr dev, - const char *name) + const char *drvname, + const char *domname) { - dev->used_by = name; + if (VIR_STRDUP(dev->used_by_drvname, drvname) < 0) + return -1; + if (VIR_STRDUP(dev->used_by_domname, domname) < 0) + return -1; + + return 0; }
-const char * -virSCSIDeviceGetUsedBy(virSCSIDevicePtr dev) +void +virSCSIDeviceGetUsedBy(virSCSIDevicePtr dev, + const char **drvname, + const char **domname) { - return dev->used_by; + *drvname = dev->used_by_drvname; + *domname = dev->used_by_domname; }
const char * diff --git a/src/util/virscsi.h b/src/util/virscsi.h index cce5df4..263b175 100644 --- a/src/util/virscsi.h +++ b/src/util/virscsi.h @@ -49,8 +49,12 @@ virSCSIDevicePtr virSCSIDeviceNew(const char *adapter, bool readonly);
void virSCSIDeviceFree(virSCSIDevicePtr dev); -void virSCSIDeviceSetUsedBy(virSCSIDevicePtr dev, const char *name); -const char *virSCSIDeviceGetUsedBy(virSCSIDevicePtr dev); +int virSCSIDeviceSetUsedBy(virSCSIDevicePtr dev, + const char *drvname, + const char *domname); +void virSCSIDeviceGetUsedBy(virSCSIDevicePtr dev, + const char **drvname, + const char **domname); const char *virSCSIDeviceGetName(virSCSIDevicePtr dev); unsigned int virSCSIDeviceGetAdapter(virSCSIDevicePtr dev); unsigned int virSCSIDeviceGetBus(virSCSIDevicePtr dev); diff --git a/src/util/virusb.c b/src/util/virusb.c index e901618..4adc928 100644 --- a/src/util/virusb.c +++ b/src/util/virusb.c @@ -55,7 +55,10 @@ struct _virUSBDevice { char name[USB_ADDR_LEN]; /* domain:bus:slot.function */ char id[USB_ID_LEN]; /* product vendor */ char *path; - const char *used_by; /* name of the domain using this dev */ + + /* driver:domain using this dev */ + char *used_by_drvname; + char *used_by_domname;
Whitespace should be consistent with the other structure members. Regards, Jim
};
struct _virUSBDeviceList { @@ -375,19 +378,31 @@ virUSBDeviceFree(virUSBDevicePtr dev) return; VIR_DEBUG("%s %s: freeing", dev->id, dev->name); VIR_FREE(dev->path); + VIR_FREE(dev->used_by_drvname); + VIR_FREE(dev->used_by_domname); VIR_FREE(dev); }
- -void virUSBDeviceSetUsedBy(virUSBDevicePtr dev, - const char *name) +int +virUSBDeviceSetUsedBy(virUSBDevicePtr dev, + const char *drv_name, + const char *dom_name) { - dev->used_by = name; + if (VIR_STRDUP(dev->used_by_drvname, drv_name) < 0) + return -1; + if (VIR_STRDUP(dev->used_by_domname, dom_name) < 0) + return -1; + + return 0; }
-const char * virUSBDeviceGetUsedBy(virUSBDevicePtr dev) +void +virUSBDeviceGetUsedBy(virUSBDevicePtr dev, + const char **drv_name, + const char **dom_name) { - return dev->used_by; + *drv_name = dev->used_by_drvname; + *dom_name = dev->used_by_domname; }
const char *virUSBDeviceGetName(virUSBDevicePtr dev) diff --git a/src/util/virusb.h b/src/util/virusb.h index aa59d12..41e680f 100644 --- a/src/util/virusb.h +++ b/src/util/virusb.h @@ -60,8 +60,12 @@ int virUSBDeviceFind(unsigned int vendor, virUSBDevicePtr *usb);
void virUSBDeviceFree(virUSBDevicePtr dev); -void virUSBDeviceSetUsedBy(virUSBDevicePtr dev, const char *name); -const char *virUSBDeviceGetUsedBy(virUSBDevicePtr dev); +int virUSBDeviceSetUsedBy(virUSBDevicePtr dev, + const char *drv_name, + const char *dom_name); +void virUSBDeviceGetUsedBy(virUSBDevicePtr dev, + const char **drv_name, + const char **dom_name); const char *virUSBDeviceGetName(virUSBDevicePtr dev);
unsigned int virUSBDeviceGetBus(virUSBDevicePtr dev);

On 11/22/2013 03:02 PM, Jim Fehlig wrote:
Chunyan Liu wrote:
Add hostdev passthrough common library so that it could be shared by all drivers and maintain a global hostdev state.
Hi Chunyan,
Looks like you addressed all of Daniel's comments from v5. One bug fix and a few additional comments below...
+ bool strict_acs_check = (flags & VIR_STRICT_ACS_CHECK)?true:false;
Needs some whitespace, e.g.
bool coldBoot = (flags & VIR_COLD_BOOT) ? true : false;
Or even simpler: bool coldBoot = !!(flags & VIR_COLD_BOOT); [Technically, we can go one further, if we could rely on 'bool' actually obeying C99: bool coldBoot = flags & VIR_COLD_BOOT; but that still gives me the willies, because we are using gnulib's <stdbool.h> as needed for portability. Gnulib documents that when it is working around the more blatant bugs in fringe/old compilers, it can no longer guarantee the C99 semantics of assignment to bool implicitly flattening non-zero values to 'true'. In fact, I suspect RHEL 5 gcc may be one such compiler that doesn't have full C99 bool rule compliance] -- Eric Blake eblake redhat com +1-919-301-3266 Libvirt virtualization library http://libvirt.org

Jim Fehlig wrote:
Chunyan Liu wrote:
Add hostdev passthrough common library so that it could be shared by all drivers and maintain a global hostdev state.
Hi Chunyan,
Looks like you addressed all of Daniel's comments from v5. One bug fix and a few additional comments below...
I forgot to mention that this patch causes failures of qemuxml2argvtest, qemuxml2xmltest, and qemuargv2xmltest when doing 'make check'. Speaking of the unit tests, as Laine noted we should look at providing improved unit tests for this new common library. Can you expand the series with a patch testing the virhostdev interface? Regards, Jim

2013/11/26 Jim Fehlig <jfehlig@suse.com>
Jim Fehlig wrote:
Chunyan Liu wrote:
Add hostdev passthrough common library so that it could be shared by all drivers and maintain a global hostdev state.
Hi Chunyan,
Looks like you addressed all of Daniel's comments from v5. One bug fix and a few additional comments below...
I forgot to mention that this patch causes failures of qemuxml2argvtest, qemuxml2xmltest, and qemuargv2xmltest when doing 'make check'.
Speaking of the unit tests, as Laine noted we should look at providing improved unit tests for this new common library. Can you expand the series with a patch testing the virhostdev interface?
OK. No problem. Will do that.
Regards, Jim

Chunyan Liu wrote:
Add VIR_DOMAIN_HOSTDEV_PCI_BACKEND_XEN. For legacy xen, it will use "pciback" as stub driver.
Sorry for the long delay in helping review these patches. I finally have some time to work on libvirt :). With the pending release, this series will have to wait for the next cycle, but hopefully we can get it in early for prolonged testing. It plugs a big hole in the libxl dirver, so thanks for your work and perseverance :). I've applied your patches to latest git master and testing looks good so far, after fixing a small issue in 2/5. See the individual patches for further comments.
Signed-off-by: Chunyan Liu <cyliu@suse.com> --- docs/schemas/domaincommon.rng | 1 + src/conf/domain_conf.c | 3 ++- src/conf/domain_conf.h | 1 + src/libxl/libxl_domain.c | 9 +++++++++ src/qemu/qemu_command.c | 3 +-- src/qemu/qemu_hotplug.c | 4 +--- 6 files changed, 15 insertions(+), 6 deletions(-)
diff --git a/docs/schemas/domaincommon.rng b/docs/schemas/domaincommon.rng index 14b6700..c096c09 100644 --- a/docs/schemas/domaincommon.rng +++ b/docs/schemas/domaincommon.rng @@ -3318,6 +3318,7 @@ <choice> <value>kvm</value> <value>vfio</value> + <value>xen</value> </choice> </attribute> <empty/> diff --git a/src/conf/domain_conf.c b/src/conf/domain_conf.c index 51c4e29..3c87464 100644 --- a/src/conf/domain_conf.c +++ b/src/conf/domain_conf.c @@ -615,7 +615,8 @@ VIR_ENUM_IMPL(virDomainHostdevSubsysPciBackend, VIR_DOMAIN_HOSTDEV_PCI_BACKEND_TYPE_LAST, "default", "kvm", - "vfio") + "vfio", + "xen")
VIR_ENUM_IMPL(virDomainHostdevCaps, VIR_DOMAIN_HOSTDEV_CAPS_TYPE_LAST, "storage", diff --git a/src/conf/domain_conf.h b/src/conf/domain_conf.h index 4520ae4..471c645 100644 --- a/src/conf/domain_conf.h +++ b/src/conf/domain_conf.h @@ -402,6 +402,7 @@ typedef enum { VIR_DOMAIN_HOSTDEV_PCI_BACKEND_DEFAULT, /* detect automaticaly, prefer VFIO */ VIR_DOMAIN_HOSTDEV_PCI_BACKEND_KVM, /* force legacy kvm style */ VIR_DOMAIN_HOSTDEV_PCI_BACKEND_VFIO, /* force vfio */ + VIR_DOMAIN_HOSTDEV_PCI_BACKEND_XEN, /* force legacy xen style, use pciback */
VIR_DOMAIN_HOSTDEV_PCI_BACKEND_TYPE_LAST } virDomainHostdevSubsysPciBackendType; diff --git a/src/libxl/libxl_domain.c b/src/libxl/libxl_domain.c index 68009db..32e798b 100644 --- a/src/libxl/libxl_domain.c +++ b/src/libxl/libxl_domain.c @@ -393,6 +393,15 @@ libxlDomainDeviceDefPostParse(virDomainDeviceDefPtr dev, STRNEQ(def->os.type, "hvm")) dev->data.chr->targetType = VIR_DOMAIN_CHR_CONSOLE_TARGET_TYPE_XEN;
+ if (dev->type == VIR_DOMAIN_DEVICE_HOSTDEV) { + virDomainHostdevDefPtr hostdev = dev->data.hostdev; + + if (hostdev->mode == VIR_DOMAIN_HOSTDEV_MODE_SUBSYS && + hostdev->source.subsys.type == VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_PCI && + hostdev->source.subsys.u.pci.backend == VIR_DOMAIN_HOSTDEV_PCI_BACKEND_DEFAULT) + hostdev->source.subsys.u.pci.backend = VIR_DOMAIN_HOSTDEV_PCI_BACKEND_XEN; + } + return 0; }
Shouldn't this hunk be in 3/5? Regards, Jim
diff --git a/src/qemu/qemu_command.c b/src/qemu/qemu_command.c index 63e235d..2e3c2df 100644 --- a/src/qemu/qemu_command.c +++ b/src/qemu/qemu_command.c @@ -5500,8 +5500,7 @@ qemuBuildPCIHostdevDevStr(virDomainDefPtr def, virBufferAddLit(&buf, "vfio-pci"); break;
- case VIR_DOMAIN_HOSTDEV_PCI_BACKEND_DEFAULT: - case VIR_DOMAIN_HOSTDEV_PCI_BACKEND_TYPE_LAST: + default: virReportError(VIR_ERR_INTERNAL_ERROR, _("invalid PCI passthrough type '%s'"), virDomainHostdevSubsysPciBackendTypeToString(backend)); diff --git a/src/qemu/qemu_hotplug.c b/src/qemu/qemu_hotplug.c index e9424d9..a72e1f1 100644 --- a/src/qemu/qemu_hotplug.c +++ b/src/qemu/qemu_hotplug.c @@ -1164,9 +1164,7 @@ int qemuDomainAttachHostPciDevice(virQEMUDriverPtr driver,
break;
- case VIR_DOMAIN_HOSTDEV_PCI_BACKEND_DEFAULT: - case VIR_DOMAIN_HOSTDEV_PCI_BACKEND_KVM: - case VIR_DOMAIN_HOSTDEV_PCI_BACKEND_TYPE_LAST: + default: break; }

On 11/22/2013 11:08 PM, Jim Fehlig wrote:
Chunyan Liu wrote:
Add VIR_DOMAIN_HOSTDEV_PCI_BACKEND_XEN. For legacy xen, it will use "pciback" as stub driver.
Sorry for the long delay in helping review these patches. I finally have some time to work on libvirt :).
With the pending release, this series will have to wait for the next cycle, but hopefully we can get it in early for prolonged testing. It plugs a big hole in the libxl dirver, so thanks for your work and perseverance :).
I've applied your patches to latest git master and testing looks good so far, after fixing a small issue in 2/5. See the individual patches for further comments.
The part that has made me nervous about this series from the beginning is that it is moving the implementation of some pretty hairy code from qemu-specific to a general library while that code has itself been getting fairly frequently bugfix tweaks. Fortunately we now have several more unit tests on this code, but before pushing we still should do a bit of extra due diligence to make sure that no recent bugfixes to the qemu-specific version of the code are missing in the new versions. (BTW, for this reason I think it is a very good idea to switch qemu and lxc over to this new library immediately, rather than waiting as was done in an earlier version of the patch series.)

Laine Stump wrote:
On 11/22/2013 11:08 PM, Jim Fehlig wrote:
Chunyan Liu wrote:
Add VIR_DOMAIN_HOSTDEV_PCI_BACKEND_XEN. For legacy xen, it will use "pciback" as stub driver.
Sorry for the long delay in helping review these patches. I finally have some time to work on libvirt :).
With the pending release, this series will have to wait for the next cycle, but hopefully we can get it in early for prolonged testing. It plugs a big hole in the libxl dirver, so thanks for your work and perseverance :).
I've applied your patches to latest git master and testing looks good so far, after fixing a small issue in 2/5. See the individual patches for further comments.
The part that has made me nervous about this series from the beginning is that it is moving the implementation of some pretty hairy code from qemu-specific to a general library while that code has itself been getting fairly frequently bugfix tweaks.
When Chunyan originally submitted the patch adding PCI passthrough support in the libxl driver, it was noted that a lot of the code is not qemu-specific, based on the amount of copy-and-paste, and hence the request for common code :-). Do you think a lot of the bugs in this code are specific to the qemu driver? I don't have a feel for the number of common vs hypervisor-specific bugs.
Fortunately we now have several more unit tests on this code, but before pushing we still should do a bit of extra due diligence to make sure that no recent bugfixes to the qemu-specific version of the code are missing in the new versions.
Agreed. I'd suggest unit tests for the virhostdev interface introduced in 2/5. Chunyan, tests/virpcitest.c should provide some ideas for virhostdev unit tests.
(BTW, for this reason I think it is a very good idea to switch qemu and lxc over to this new library immediately, rather than waiting as was done in an earlier version of the patch series.)
I think her original post was only an RFC to get consensus on a virhostdev interface, one which hopefully prevents hypervisor-specific code from trickling into the common code. But definitely agree that the qemu and lxc drivers should switch immediately. Regards, Jim

On 11/26/2013 04:09 AM, Jim Fehlig wrote:
When Chunyan originally submitted the patch adding PCI passthrough support in the libxl driver, it was noted that a lot of the code is not qemu-specific, based on the amount of copy-and-paste, and hence the request for common code :-).
Yes. It's definitely the right way to do it.
Do you think a lot of the bugs in this code are specific to the qemu driver? I don't have a feel for the number of common vs hypervisor-specific bugs.
The bugs that I was thinking of were related to either vfio and/or to binding/unbinding drivers to the devices, so they would be hypervisor-agnostic.
participants (4)
-
Chunyan Liu
-
Eric Blake
-
Jim Fehlig
-
Laine Stump