(gdb) p/x QEMUD_CMD_FLAG_VNET_HOST $7 = 0xffffffff80000000 Oops - that meant we were incorrectly setting QEMU_CMD_FLAG_RTC_TD_HACK for qemu-kvm-0.12.3 (and probably botching a few other settings as well). * src/qemu/qemu_conf.h (QEMUD_CMD_FLAG_VNET_HOST): Avoid sign extension. * tests/qemuhelpdata/qemu-kvm-0.12.3: New file. * tests/qemuhelptest.c (mymain): Add another case. --- It didn't help that the test was truncating output to 31 bits, and getting confused with sign extension as well. src/qemu/qemu_conf.h | 8 +- tests/qemuhelpdata/qemu-kvm-0.12.3 | 216 ++++++++++++++++++++++++++++++++++++ tests/qemuhelptest.c | 39 ++++++- 3 files changed, 255 insertions(+), 8 deletions(-) create mode 100644 tests/qemuhelpdata/qemu-kvm-0.12.3 diff --git a/src/qemu/qemu_conf.h b/src/qemu/qemu_conf.h index b2820f0..a101e47 100644 --- a/src/qemu/qemu_conf.h +++ b/src/qemu/qemu_conf.h @@ -1,7 +1,7 @@ /* * qemu_conf.h: QEMU configuration management * - * Copyright (C) 2006, 2007, 2009, 2010 Red Hat, Inc. + * Copyright (C) 2006-2007, 2009-2010 Red Hat, Inc. * Copyright (C) 2006 Daniel P. Berrange * * This library is free software; you can redistribute it and/or @@ -64,7 +64,7 @@ enum qemud_cmd_flags { QEMUD_CMD_FLAG_DRIVE_FORMAT = (1 << 14), /* Is -drive format= avail */ QEMUD_CMD_FLAG_VGA = (1 << 15), /* Is -vga avail */ - /* features added in qemu-0.10.0 */ + /* features added in qemu-0.10.0 or later */ QEMUD_CMD_FLAG_0_10 = (1 << 16), QEMUD_CMD_FLAG_NET_NAME = QEMUD_CMD_FLAG_0_10, /* -net ...,name=str */ QEMUD_CMD_FLAG_HOST_NET_ADD = QEMUD_CMD_FLAG_0_10, /* host_net_add monitor command */ @@ -83,8 +83,8 @@ enum qemud_cmd_flags { QEMUD_CMD_FLAG_SMP_TOPOLOGY = (1 << 28), /* Is sockets=s,cores=c,threads=t available for -smp? */ QEMUD_CMD_FLAG_NETDEV = (1 << 29), /* The -netdev flag & netdev_add/remove monitor commands */ QEMUD_CMD_FLAG_RTC = (1 << 30), /* The -rtc flag for clock options */ - QEMUD_CMD_FLAG_VNET_HOST = (1 << 31), /* vnet-host support is available in qemu */ - QEMUD_CMD_FLAG_RTC_TD_HACK = (1LL << 32), /* -rtd-td-hack available */ + QEMUD_CMD_FLAG_VNET_HOST = (1LL << 31), /* vnet-host support is available in qemu */ + QEMUD_CMD_FLAG_RTC_TD_HACK = (1LL << 32), /* -rtc-td-hack available */ QEMUD_CMD_FLAG_NO_HPET = (1LL << 33), /* -no-hpet flag is supported */ QEMUD_CMD_FLAG_NO_KVM_PIT = (1LL << 34), /* -no-kvm-pit-reinjection supported */ QEMUD_CMD_FLAG_TDF = (1LL << 35), /* -tdf flag (user-mode pit catchup) */ diff --git a/tests/qemuhelpdata/qemu-kvm-0.12.3 b/tests/qemuhelpdata/qemu-kvm-0.12.3 new file mode 100644 index 0000000..54a804f --- /dev/null +++ b/tests/qemuhelpdata/qemu-kvm-0.12.3 @@ -0,0 +1,216 @@ +QEMU PC emulator version 0.12.3 (qemu-kvm-0.12.3), Copyright (c) 2003-2008 Fabrice Bellard +usage: qemu [options] [disk_image] + +'disk_image' is a raw hard image image for IDE hard disk 0 + +Standard options: +-h or -help display this help and exit +-version display version information and exit +-M machine select emulated machine (-M ? for list) +-cpu cpu select CPU (-cpu ? for list) +-smp n[,maxcpus=cpus][,cores=cores][,threads=threads][,sockets=sockets] + set the number of CPUs to 'n' [default=1] + maxcpus= maximum number of total cpus, including + offline CPUs for hotplug etc. + cores= number of CPU cores on one socket + threads= number of threads on one CPU core + sockets= number of discrete sockets in the system +-numa node[,mem=size][,cpus=cpu[-cpu]][,nodeid=node] +-fda/-fdb file use 'file' as floppy disk 0/1 image +-hda/-hdb file use 'file' as IDE hard disk 0/1 image +-hdc/-hdd file use 'file' as IDE hard disk 2/3 image +-cdrom file use 'file' as IDE cdrom image (cdrom is ide1 master) +-drive [file=file][,if=type][,bus=n][,unit=m][,media=d][,index=i] + [,cyls=c,heads=h,secs=s[,trans=t]][,snapshot=on|off] + [,cache=writethrough|writeback|none][,format=f][,serial=s] + [,addr=A][,id=name][,aio=threads|native] + [,boot=on|off] + use 'file' as a drive image +-set group.id.arg=value + set <arg> parameter for item <id> of type <group> + i.e. -set drive.$id.file=/path/to/image +-global driver.property=value + set a global default for a driver property +-mtdblock file use 'file' as on-board Flash memory image +-sd file use 'file' as SecureDigital card image +-pflash file use 'file' as a parallel flash image +-boot [order=drives][,once=drives][,menu=on|off] + 'drives': floppy (a), hard disk (c), CD-ROM (d), network (n) +-snapshot write to temporary files instead of disk image files +-m megs set virtual RAM size to megs MB [default=128] +-k language use keyboard layout (for example 'fr' for French) +-audio-help print list of audio drivers and their options +-soundhw c1,... enable audio support + and only specified sound cards (comma separated list) + use -soundhw ? to get the list of supported cards + use -soundhw all to enable all of them +-usb enable the USB driver (will be the default soon) +-usbdevice name add the host or guest USB device 'name' +-device driver[,options] add device +-name string1[,process=string2] set the name of the guest + string1 sets the window title and string2 the process name (on Linux) +-uuid %08x-%04x-%04x-%04x-%012x + specify machine UUID + +Display options: +-nographic disable graphical output and redirect serial I/Os to console +-curses use a curses/ncurses interface instead of SDL +-no-frame open SDL window without a frame and window decorations +-alt-grab use Ctrl-Alt-Shift to grab mouse (instead of Ctrl-Alt) +-ctrl-grab use Right-Ctrl to grab mouse (instead of Ctrl-Alt) +-no-quit disable SDL window close capability +-sdl enable SDL +-portrait rotate graphical output 90 deg left (only PXA LCD) +-vga [std|cirrus|vmware|xenfb|none] + select video card type +-full-screen start in full screen +-vnc display start a VNC server on display + +1 target only: +-win2k-hack use it when installing Windows 2000 to avoid a disk full bug +-no-fd-bootchk disable boot signature checking for floppy disks +-no-acpi disable ACPI +-no-hpet disable HPET +-balloon none disable balloon device +-balloon virtio[,addr=str] + enable virtio balloon device (default) +-acpitable [sig=str][,rev=n][,oem_id=str][,oem_table_id=str][,oem_rev=n][,asl_compiler_id=str][,asl_compiler_rev=n][,data=file1[:file2]...] + ACPI table description +-smbios file=binary + Load SMBIOS entry from binary file +-smbios type=0[,vendor=str][,version=str][,date=str][,release=%d.%d] + Specify SMBIOS type 0 fields +-smbios type=1[,manufacturer=str][,product=str][,version=str][,serial=str] + [,uuid=uuid][,sku=str][,family=str] + Specify SMBIOS type 1 fields + +Network options: +-net nic[,vlan=n][,macaddr=mac][,model=type][,name=str][,addr=str][,vectors=v] + create a new Network Interface Card and connect it to VLAN 'n' +-net user[,vlan=n][,name=str][,net=addr[/mask]][,host=addr][,restrict=y|n] + [,hostname=host][,dhcpstart=addr][,dns=addr][,tftp=dir][,bootfile=f] + [,hostfwd=rule][,guestfwd=rule][,smb=dir[,smbserver=addr]] + connect the user mode network stack to VLAN 'n', configure its + DHCP server and enabled optional services +-net tap[,vlan=n][,name=str][,fd=h][,ifname=name][,script=file][,downscript=dfile][,sndbuf=nbytes][,vnet_hdr=on|off][,vhost=on|off][,vhostfd=h] + connect the host TAP network interface to VLAN 'n' and use the + network scripts 'file' (default=/etc/qemu-ifup) + and 'dfile' (default=/etc/qemu-ifdown); + use '[down]script=no' to disable script execution; + use 'fd=h' to connect to an already opened TAP interface + use 'sndbuf=nbytes' to limit the size of the send buffer; the + default of 'sndbuf=1048576' can be disabled using 'sndbuf=0' + use vnet_hdr=off to avoid enabling the IFF_VNET_HDR tap flag; use + vnet_hdr=on to make the lack of IFF_VNET_HDR support an error condition + use vhost=on to enable experimental in kernel accelerator + use 'vhostfd=h' to connect to an already opened vhost net device +-net socket[,vlan=n][,name=str][,fd=h][,listen=[host]:port][,connect=host:port] + connect the vlan 'n' to another VLAN using a socket connection +-net socket[,vlan=n][,name=str][,fd=h][,mcast=maddr:port] + connect the vlan 'n' to multicast maddr and port +-net dump[,vlan=n][,file=f][,len=n] + dump traffic on vlan 'n' to file 'f' (max n bytes per packet) +-net none use it alone to have zero network devices; if no -net option + is provided, the default is '-net nic -net user' +-netdev [user|tap|socket],id=str[,option][,option][,...] + +Character device options: +-chardev null,id=id +-chardev socket,id=id[,host=host],port=host[,to=to][,ipv4][,ipv6][,nodelay] + [,server][,nowait][,telnet] (tcp) +-chardev socket,id=id,path=path[,server][,nowait][,telnet] (unix) +-chardev udp,id=id[,host=host],port=port[,localaddr=localaddr] + [,localport=localport][,ipv4][,ipv6] +-chardev msmouse,id=id +-chardev vc,id=id[[,width=width][,height=height]][[,cols=cols][,rows=rows]] +-chardev file,id=id,path=path +-chardev pipe,id=id,path=path +-chardev pty,id=id +-chardev stdio,id=id +-chardev tty,id=id,path=path +-chardev parport,id=id,path=path + +Bluetooth(R) options: +-bt hci,null dumb bluetooth HCI - doesn't respond to commands +-bt hci,host[:id] + use host's HCI with the given name +-bt hci[,vlan=n] + emulate a standard HCI in virtual scatternet 'n' +-bt vhci[,vlan=n] + add host computer to virtual scatternet 'n' using VHCI +-bt device:dev[,vlan=n] + emulate a bluetooth device 'dev' in scatternet 'n' + +Linux/Multiboot boot specific: +-kernel bzImage use 'bzImage' as kernel image +-append cmdline use 'cmdline' as kernel command line +-initrd file use 'file' as initial ram disk + +Debug/Expert options: +-serial dev redirect the serial port to char device 'dev' +-parallel dev redirect the parallel port to char device 'dev' +-monitor dev redirect the monitor to char device 'dev' +-qmp dev like -monitor but opens in 'control' mode. +-mon chardev=[name][,mode=readline|control][,default] +-pidfile file write PID to 'file' +-singlestep always run in singlestep mode +-S freeze CPU at startup (use 'c' to start execution) +-gdb dev wait for gdb connection on 'dev' +-s shorthand for -gdb tcp::1234 +-d item1,... output log to /tmp/qemu.log (use -d ? for a list of log items) +-hdachs c,h,s[,t] + force hard disk 0 physical geometry and the optional BIOS + translation (t=none or lba) (usually qemu can guess them) +-L path set the directory for the BIOS, VGA BIOS and keymaps +-bios file set the filename for the BIOS +-no-reboot exit instead of rebooting +-no-shutdown stop before shutdown +-loadvm [tag|id] + start right away with a saved state (loadvm in monitor) +-daemonize daemonize QEMU after initializing +-option-rom rom load a file, rom, into the option ROM space +-clock force the use of the given methods for timer alarm. + To see what timers are available use -clock ? +-rtc [base=utc|localtime|date][,clock=host|vm][,driftfix=none|slew] + set the RTC base and clock, enable drift fix for clock ticks +-icount [N|auto] + enable virtual instruction counter with 2^N clock ticks per + instruction +-watchdog i6300esb|ib700 + enable virtual hardware watchdog [default=none] +-watchdog-action reset|shutdown|poweroff|pause|debug|none + action when watchdog fires [default=reset] +-echr chr set terminal escape character instead of ctrl-a +-virtioconsole c + set virtio console +-show-cursor show cursor +-tb-size n set TB size +-incoming p prepare for incoming migration, listen on port p +-nodefaults don't create default devices. +-chroot dir Chroot to dir just before starting the VM. +-runas user Change to user id user just before starting the VM. +-readconfig <file> +-writeconfig <file> + read/write config file +-no-kvm disable KVM hardware virtualization +-no-kvm-irqchip disable KVM kernel mode PIC/IOAPIC/LAPIC +-no-kvm-pit disable KVM kernel mode PIT +-no-kvm-pit-reinjection disable KVM kernel mode PIT interrupt reinjection +-pcidevice host=bus:dev.func[,dma=none][,name=string] + expose a PCI device to the guest OS. + dma=none: don't perform any dma translations (default is to use an iommu) + 'string' is used in log output. +-enable-nesting enable support for running a VM inside the VM (AMD only) +-nvram FILE provide ia64 nvram contents +-tdf enable guest time drift compensation +-kvm-shadow-memory MEGABYTES + allocate MEGABYTES for kvm mmu shadowing +-mem-path FILE provide backing storage for guest RAM +-mem-prealloc preallocate guest memory (use with -mempath) + +During emulation, the following keys are useful: +ctrl-alt-f toggle full screen +ctrl-alt-n switch to virtual console 'n' +ctrl-alt toggle mouse and keyboard grab + +When using -nographic, press 'ctrl-a h' to get some help. diff --git a/tests/qemuhelptest.c b/tests/qemuhelptest.c index b8c4b91..517a8fe 100644 --- a/tests/qemuhelptest.c +++ b/tests/qemuhelptest.c @@ -21,13 +21,14 @@ struct testInfo { static char *progname; static char *abs_srcdir; -static void printMismatchedFlags(int got, int expect) +static void printMismatchedFlags(unsigned long long got, + unsigned long long expect) { int i; - for (i = 0 ; i < (sizeof(got)*8) ; i++) { - int gotFlag = (got & (1 << i)); - int expectFlag = (expect & (1 << i)); + for (i = 0 ; i < (sizeof(got)*CHAR_BIT) ; i++) { + unsigned long long gotFlag = (got & (1LL << i)); + unsigned long long expectFlag = (expect & (1LL << i)); if (gotFlag && !expectFlag) fprintf(stderr, "Extra flag %i\n", i); if (!gotFlag && expectFlag) @@ -245,6 +246,36 @@ mymain(int argc, char **argv) QEMUD_CMD_FLAG_RTC | QEMUD_CMD_FLAG_NO_HPET, 12001, 0, 0); + DO_TEST("qemu-kvm-0.12.3", + QEMUD_CMD_FLAG_VNC_COLON | + QEMUD_CMD_FLAG_NO_REBOOT | + QEMUD_CMD_FLAG_DRIVE | + QEMUD_CMD_FLAG_DRIVE_BOOT | + QEMUD_CMD_FLAG_NAME | + QEMUD_CMD_FLAG_UUID | + QEMUD_CMD_FLAG_VNET_HDR | + QEMUD_CMD_FLAG_MIGRATE_QEMU_TCP | + QEMUD_CMD_FLAG_MIGRATE_QEMU_EXEC | + QEMUD_CMD_FLAG_DRIVE_CACHE_V2 | + QEMUD_CMD_FLAG_KVM | + QEMUD_CMD_FLAG_DRIVE_FORMAT | + QEMUD_CMD_FLAG_DRIVE_SERIAL | + QEMUD_CMD_FLAG_VGA | + QEMUD_CMD_FLAG_0_10 | + QEMUD_CMD_FLAG_PCIDEVICE | + QEMUD_CMD_FLAG_MEM_PATH | + QEMUD_CMD_FLAG_SDL | + QEMUD_CMD_FLAG_MIGRATE_QEMU_UNIX | + QEMUD_CMD_FLAG_CHARDEV | + QEMUD_CMD_FLAG_BALLOON | + QEMUD_CMD_FLAG_DEVICE | + QEMUD_CMD_FLAG_SMP_TOPOLOGY | + QEMUD_CMD_FLAG_RTC | + QEMUD_CMD_FLAG_VNET_HOST | + QEMUD_CMD_FLAG_NO_HPET | + QEMUD_CMD_FLAG_NO_KVM_PIT | + QEMUD_CMD_FLAG_TDF, + 12003, 1, 0); return ret == 0 ? EXIT_SUCCESS : EXIT_FAILURE; } -- 1.7.0.1