I'm trying to build a setup where the VMs only have point-to-point Ethernet connections to the hypervisor, which will then act as a layer-3 router. When the VM starts, the hypervisor needs to UP the assigned tap interface and configure an IP/mask on it (that will be the VMs default gateway). So I'm currently looking at a config looking like this: <interface type='ethernet'> <script path='/sbin/vm-ifup'/> </interface> The problem I'm facing is that there appears to be no way supply information to the script by way of command-line arguments or custom environment variables. So something like: <script path='/sbin/vm-ifup 2001:db8::/64'/> ...fails because it tries to execute the whole string, space included, as the script file. The only information I have available in the script is the assigned tap device in the hypervisor (which is automatically passed in as the first argument to the script). As the device name is automatically assigned on VM start, it is useless as a lookup key of sorts for finding more information. One workaround would be to have one network script per VM that hard-codes all the necessary information, but if you have a large number of hypervisors with an even larger number of VMs, this quickly becomes impractical. So my question is, is there some other way to pass configuration information to the network script or to accomplish what I'm trying to do? Best regards, -- Tore Anderson Redpill Linpro AS - http://www.redpill-linpro.com