[libvirt] [PATCH] tests: Test for nwfilter
This is a repost of a previously posted patch. Attached is a test for automatic testing of of the nwfilter rules as the are instantiated in form of ebtables, iptables and ip6tables rules on running VMs. The test automatically starts libvirtd from the build directory unless it finds libvirtd running. My hope is that one won't notice this. It uses virsh from the build directory to create two dummy VMs with random name suffixes. The VMs don't boot any OS but just stop in the BIOS. This is enough to run the nwfilter tests. Afterwards the nwfilter of the one VM are continuously modified and the instantiation is checked. The instantiation of rules of the 2nd VM are also continously checked to verify that the modifications on the 1st VM has had no effect on the instantiated rules of the 2nd VM. The test has a couple of command line options. Run it as follows nwfilter2vmtest.sh --noattach --libvirt-test to get the expected libvirt test suite output: TEST: nwfilter2vmtest.sh ........................................ 40 [...] ..................... 821 OK nwfilter2vmtest.sh --noattach --verbose to get lots of this kind of output: PASS nwfilterxml2xmlin/ah-ipv6-test.xml : ip6tables -L FI-testvm8328 -n PASS nwfilterxml2xmlin/ah-ipv6-test.xml : ip6tables -L FO-testvm8328 -n [...] My installation currently has problems with attaching interfaces to VMs, so I have to use the --noattach option to avoid tests on interface attachments (ymmv). Signed-off-by: Stefan Berger <stefanb@us.ibm.com> --- tests/nwfilter2vmtest.sh | 461 ++++++++++++++++++ tests/nwfilterxml2fwallout/ah-ipv6-test.fwall | 28 + tests/nwfilterxml2fwallout/ah-test.fwall | 26 + tests/nwfilterxml2fwallout/all-ipv6-test.fwall | 28 + tests/nwfilterxml2fwallout/all-test.fwall | 26 + tests/nwfilterxml2fwallout/arp-test.fwall | 9 tests/nwfilterxml2fwallout/conntrack-test.fwall | 24 tests/nwfilterxml2fwallout/esp-ipv6-test.fwall | 28 + tests/nwfilterxml2fwallout/esp-test.fwall | 26 + tests/nwfilterxml2fwallout/hex-data-test.fwall | 68 ++ tests/nwfilterxml2fwallout/icmp-direction-test.fwall | 23 tests/nwfilterxml2fwallout/icmp-direction2-test.fwall | 23 tests/nwfilterxml2fwallout/icmp-direction3-test.fwall | 23 tests/nwfilterxml2fwallout/icmp-test.fwall | 23 tests/nwfilterxml2fwallout/icmpv6-test.fwall | 26 + tests/nwfilterxml2fwallout/igmp-test.fwall | 26 + tests/nwfilterxml2fwallout/ip-test.fwall | 12 tests/nwfilterxml2fwallout/ipt-no-macspoof-test.fwall | 19 tests/nwfilterxml2fwallout/ipv6-test.fwall | 13 tests/nwfilterxml2fwallout/mac-test.fwall | 12 tests/nwfilterxml2fwallout/rarp-test.fwall | 9 tests/nwfilterxml2fwallout/sctp-ipv6-test.fwall | 28 + tests/nwfilterxml2fwallout/sctp-ipv6-test.xml | 29 + tests/nwfilterxml2fwallout/sctp-test.fwall | 26 + tests/nwfilterxml2fwallout/tcp-ipv6-test.fwall | 28 + tests/nwfilterxml2fwallout/tcp-test.fwall | 26 + tests/nwfilterxml2fwallout/testvm.fwall.dat | 73 ++ tests/nwfilterxml2fwallout/udp-ipv6-test.fwall | 28 + tests/nwfilterxml2fwallout/udp-ipv6-test.xml | 29 + tests/nwfilterxml2fwallout/udp-test.fwall | 26 + tests/nwfilterxml2fwallout/udplite-ipv6-test.fwall | 28 + tests/nwfilterxml2fwallout/udplite-test.fwall | 26 + 32 files changed, 1280 insertions(+) Index: libvirt-acl/tests/nwfilterxml2fwallout/arp-test.fwall =================================================================== --- /dev/null +++ libvirt-acl/tests/nwfilterxml2fwallout/arp-test.fwall @@ -0,0 +1,9 @@ +#ebtables -t nat -L libvirt-I-vnet0 | grep -v "^Bridge" | grep -v "^$" +-p ARP -s 1:2:3:4:5:6 -d aa:bb:cc:dd:ee:ff --arp-op Request --arp-htype 12 --arp-ptype 0x22 --arp-mac-src 1:2:3:4:5:6 --arp-mac-dst a:b:c:d:e:f -j ACCEPT +-p ARP -s 1:2:3:4:5:6 --arp-op Request --arp-htype 255 --arp-ptype 0xff -j ACCEPT +-p ARP -s 1:2:3:4:5:6 --arp-op 11 --arp-htype 256 --arp-ptype 0x100 -j ACCEPT +-p ARP -s 1:2:3:4:5:6 --arp-op 65535 --arp-htype 65535 --arp-ptype 0xffff -j ACCEPT +-p ARP -s 1:2:3:4:5:6 -j ACCEPT +#ebtables -t nat -L PREROUTING | grep vnet0 +-i vnet0 -j libvirt-I-vnet0 + Index: libvirt-acl/tests/nwfilterxml2fwallout/mac-test.fwall =================================================================== --- /dev/null +++ libvirt-acl/tests/nwfilterxml2fwallout/mac-test.fwall @@ -0,0 +1,12 @@ +#ebtables -t nat -L PREROUTING | grep vnet0 | grep -v "^Bridge" | grep -v "^$" +-i vnet0 -j libvirt-I-vnet0 +#ebtables -t nat -L POSTROUTING | grep vnet0 | grep -v "^Bridge" | grep -v "^$" +-o vnet0 -j libvirt-O-vnet0 +#ebtables -t nat -L libvirt-I-vnet0 | grep -v "^Bridge" | grep -v "^$" +-p ARP -s 1:2:3:4:5:6 -j ACCEPT +#ebtables -t nat -L libvirt-O-vnet0 | grep -v "^Bridge" | grep -v "^$" +-p IPv4 -d aa:bb:cc:dd:ee:ff -j ACCEPT +-p 0x600 -d aa:bb:cc:dd:ee:ff -j ACCEPT +-d aa:bb:cc:dd:ee:ff -j ACCEPT +-p 0xffff -d aa:bb:cc:dd:ee:ff -j ACCEPT + Index: libvirt-acl/tests/nwfilterxml2fwallout/ip-test.fwall =================================================================== --- /dev/null +++ libvirt-acl/tests/nwfilterxml2fwallout/ip-test.fwall @@ -0,0 +1,12 @@ +#ebtables -t nat -L PREROUTING | grep vnet0 +-i vnet0 -j libvirt-I-vnet0 +#ebtables -t nat -L POSTROUTING | grep vnet0 +-o vnet0 -j libvirt-O-vnet0 +#ebtables -t nat -L libvirt-I-vnet0 | grep -v "^Bridge" | grep -v "^$" +-p IPv4 -s 1:2:3:4:5:6 -d aa:bb:cc:dd:ee:ff --ip-src 10.1.2.3 --ip-dst 10.1.2.3 --ip-proto udp --ip-sport 20:22 --ip-dport 100:101 -j ACCEPT +-p IPv4 --ip-src 10.1.0.0/17 --ip-dst 10.1.2.0/24 --ip-tos 0x3F --ip-proto udp -j ACCEPT +-p IPv4 --ip-src 10.1.2.2/31 --ip-dst 10.1.2.3 -j ACCEPT +#ebtables -t nat -L libvirt-O-vnet0 | grep -v "^Bridge" | grep -v "^$" +-p IPv4 --ip-src 10.1.2.2/31 --ip-dst 10.1.2.0/25 --ip-proto 255 -j ACCEPT +-p IPv4 --ip-src 10.1.2.3 --ip-dst 10.1.2.2/31 -j ACCEPT + Index: libvirt-acl/tests/nwfilterxml2fwallout/ipv6-test.fwall =================================================================== --- /dev/null +++ libvirt-acl/tests/nwfilterxml2fwallout/ipv6-test.fwall @@ -0,0 +1,13 @@ +#ebtables -t nat -L PREROUTING | grep vnet0 +-i vnet0 -j libvirt-I-vnet0 +#ebtables -t nat -L POSTROUTING | grep vnet0 +-o vnet0 -j libvirt-O-vnet0 +#ebtables -t nat -L libvirt-I-vnet0 | grep -v "^Bridge" | grep -v "^$" +-p IPv6 -s 1:2:3:4:5:6/ff:ff:ff:ff:ff:fe -d aa:bb:cc:dd:ee:80/ff:ff:ff:ff:ff:80 --ip6-src ::/ffff:fc00:: --ip6-dst ::10.1.0.0/ffff:ffff:ffff:ffff:ffff:ffff:ffff:8000 --ip6-proto udp --ip6-sport 20:22 --ip6-dport 100:101 -j ACCEPT +-p IPv6 --ip6-src a:b:c::/ffff:ffff:ffff:ffff:8000:: --ip6-dst 1::2/ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff --ip6-proto tcp --ip6-sport 100:101 --ip6-dport 20:22 -j ACCEPT +-p IPv6 --ip6-src a:b:c::/ffff:ffff:ffff:ffff:8000:: --ip6-dst 1::2/ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff --ip6-proto tcp --ip6-sport 65535 --ip6-dport 255:256 -j ACCEPT +-p IPv6 --ip6-src a:b:c::/ffff:ffff:ffff:ffff:8000:: --ip6-dst 1::2/ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff --ip6-proto mux -j ACCEPT +#ebtables -t nat -L libvirt-O-vnet0 | grep -v "^Bridge" | grep -v "^$" +-p IPv6 --ip6-src 1::2/ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff --ip6-dst a:b:c::/ffff:ffff:ffff:ffff:8000:: --ip6-proto tcp --ip6-sport 20:22 --ip6-dport 100:101 -j ACCEPT +-p IPv6 --ip6-src 1::2/ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff --ip6-dst a:b:c::/ffff:ffff:ffff:ffff:8000:: --ip6-proto tcp --ip6-sport 255:256 --ip6-dport 65535 -j ACCEPT +-p IPv6 --ip6-src 1::2/ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff --ip6-dst a:b:c::/ffff:ffff:ffff:ffff:8000:: --ip6-proto mux -j ACCEPT Index: libvirt-acl/tests/nwfilterxml2fwallout/sctp-test.fwall =================================================================== --- /dev/null +++ libvirt-acl/tests/nwfilterxml2fwallout/sctp-test.fwall @@ -0,0 +1,26 @@ +#iptables -L FI-vnet0 -n +Chain FI-vnet0 (1 references) +target prot opt source destination +RETURN sctp -- 0.0.0.0/0 10.1.2.3 MAC 01:02:03:04:05:06 DSCP match 0x02state NEW,ESTABLISHED +RETURN sctp -- 0.0.0.0/0 10.1.2.3 DSCP match 0x21sctp spts:100:1111 dpts:20:21 +RETURN sctp -- 0.0.0.0/0 10.1.2.3 DSCP match 0x3fsctp spt:65535 dpts:255:256 +#iptables -L FO-vnet0 -n +Chain FO-vnet0 (1 references) +target prot opt source destination +ACCEPT sctp -- 10.1.2.3 0.0.0.0/0 DSCP match 0x02state ESTABLISHED +ACCEPT sctp -- 10.1.2.3 0.0.0.0/0 MAC 01:02:03:04:05:06 DSCP match 0x21sctp spts:20:21 dpts:100:1111 +ACCEPT sctp -- 10.1.2.3 0.0.0.0/0 MAC 01:02:03:04:05:06 DSCP match 0x3fsctp spts:255:256 dpt:65535 +#iptables -L HI-vnet0 -n +Chain HI-vnet0 (1 references) +target prot opt source destination +ACCEPT sctp -- 0.0.0.0/0 10.1.2.3 MAC 01:02:03:04:05:06 DSCP match 0x02 +ACCEPT sctp -- 0.0.0.0/0 10.1.2.3 DSCP match 0x21sctp spts:100:1111 dpts:20:21 +ACCEPT sctp -- 0.0.0.0/0 10.1.2.3 DSCP match 0x3fsctp spt:65535 dpts:255:256 +#iptables -L libvirt-host-in -n | grep vnet0 | tr -s " " +HI-vnet0 all -- 0.0.0.0/0 0.0.0.0/0 [goto] PHYSDEV match --physdev-in vnet0 +#iptables -L libvirt-in -n | grep vnet0 | tr -s " " +FI-vnet0 all -- 0.0.0.0/0 0.0.0.0/0 [goto] PHYSDEV match --physdev-in vnet0 +#iptables -L libvirt-in-post -n | grep vnet0 +ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 PHYSDEV match --physdev-in vnet0 +#iptables -L libvirt-out -n | grep vnet0 | tr -s " " +FO-vnet0 all -- 0.0.0.0/0 0.0.0.0/0 [goto] PHYSDEV match --physdev-out vnet0 Index: libvirt-acl/tests/nwfilterxml2fwallout/tcp-test.fwall =================================================================== --- /dev/null +++ libvirt-acl/tests/nwfilterxml2fwallout/tcp-test.fwall @@ -0,0 +1,26 @@ +#iptables -L FI-vnet0 -n +Chain FI-vnet0 (1 references) +target prot opt source destination +RETURN tcp -- 0.0.0.0/0 10.1.2.3 MAC 01:02:03:04:05:06 DSCP match 0x02state NEW,ESTABLISHED +RETURN tcp -- 0.0.0.0/0 10.1.2.3 DSCP match 0x21tcp spts:100:1111 dpts:20:21 +RETURN tcp -- 0.0.0.0/0 10.1.2.3 DSCP match 0x3ftcp spt:65535 dpts:255:256 +#iptables -L FO-vnet0 -n +Chain FO-vnet0 (1 references) +target prot opt source destination +ACCEPT tcp -- 10.1.2.3 0.0.0.0/0 DSCP match 0x02state ESTABLISHED +ACCEPT tcp -- 10.1.2.3 0.0.0.0/0 MAC 01:02:03:04:05:06 DSCP match 0x21tcp spts:20:21 dpts:100:1111 +ACCEPT tcp -- 10.1.2.3 0.0.0.0/0 MAC 01:02:03:04:05:06 DSCP match 0x3ftcp spts:255:256 dpt:65535 +#iptables -L HI-vnet0 -n +Chain HI-vnet0 (1 references) +target prot opt source destination +ACCEPT tcp -- 0.0.0.0/0 10.1.2.3 MAC 01:02:03:04:05:06 DSCP match 0x02 +ACCEPT tcp -- 0.0.0.0/0 10.1.2.3 DSCP match 0x21tcp spts:100:1111 dpts:20:21 +ACCEPT tcp -- 0.0.0.0/0 10.1.2.3 DSCP match 0x3ftcp spt:65535 dpts:255:256 +#iptables -L libvirt-host-in -n | grep vnet0 | tr -s " " +HI-vnet0 all -- 0.0.0.0/0 0.0.0.0/0 [goto] PHYSDEV match --physdev-in vnet0 +#iptables -L libvirt-in -n | grep vnet0 | tr -s " " +FI-vnet0 all -- 0.0.0.0/0 0.0.0.0/0 [goto] PHYSDEV match --physdev-in vnet0 +#iptables -L libvirt-in-post -n | grep vnet0 +ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 PHYSDEV match --physdev-in vnet0 +#iptables -L libvirt-out -n | grep vnet0 | tr -s " " +FO-vnet0 all -- 0.0.0.0/0 0.0.0.0/0 [goto] PHYSDEV match --physdev-out vnet0 Index: libvirt-acl/tests/nwfilterxml2fwallout/udp-test.fwall =================================================================== --- /dev/null +++ libvirt-acl/tests/nwfilterxml2fwallout/udp-test.fwall @@ -0,0 +1,26 @@ +#iptables -L FI-vnet0 -n +Chain FI-vnet0 (1 references) +target prot opt source destination +RETURN udp -- 0.0.0.0/0 10.1.2.3 MAC 01:02:03:04:05:06 DSCP match 0x02state NEW,ESTABLISHED +RETURN udp -- 0.0.0.0/0 10.1.2.3 DSCP match 0x21udp spts:100:1111 dpts:20:21 +RETURN udp -- 0.0.0.0/0 10.1.2.3 DSCP match 0x3fudp spt:65535 dpts:255:256 +#iptables -L FO-vnet0 -n +Chain FO-vnet0 (1 references) +target prot opt source destination +ACCEPT udp -- 10.1.2.3 0.0.0.0/0 DSCP match 0x02state ESTABLISHED +ACCEPT udp -- 10.1.2.3 0.0.0.0/0 MAC 01:02:03:04:05:06 DSCP match 0x21udp spts:20:21 dpts:100:1111 +ACCEPT udp -- 10.1.2.3 0.0.0.0/0 MAC 01:02:03:04:05:06 DSCP match 0x3fudp spts:255:256 dpt:65535 +#iptables -L HI-vnet0 -n +Chain HI-vnet0 (1 references) +target prot opt source destination +ACCEPT udp -- 0.0.0.0/0 10.1.2.3 MAC 01:02:03:04:05:06 DSCP match 0x02 +ACCEPT udp -- 0.0.0.0/0 10.1.2.3 DSCP match 0x21udp spts:100:1111 dpts:20:21 +ACCEPT udp -- 0.0.0.0/0 10.1.2.3 DSCP match 0x3fudp spt:65535 dpts:255:256 +#iptables -L libvirt-host-in -n | grep vnet0 | tr -s " " +HI-vnet0 all -- 0.0.0.0/0 0.0.0.0/0 [goto] PHYSDEV match --physdev-in vnet0 +#iptables -L libvirt-in -n | grep vnet0 | tr -s " " +FI-vnet0 all -- 0.0.0.0/0 0.0.0.0/0 [goto] PHYSDEV match --physdev-in vnet0 +#iptables -L libvirt-in-post -n | grep vnet0 +ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 PHYSDEV match --physdev-in vnet0 +#iptables -L libvirt-out -n | grep vnet0 | tr -s " " +FO-vnet0 all -- 0.0.0.0/0 0.0.0.0/0 [goto] PHYSDEV match --physdev-out vnet0 Index: libvirt-acl/tests/nwfilterxml2fwallout/tcp-ipv6-test.fwall =================================================================== --- /dev/null +++ libvirt-acl/tests/nwfilterxml2fwallout/tcp-ipv6-test.fwall @@ -0,0 +1,28 @@ +#ip6tables -L FI-vnet0 -n +Chain FI-vnet0 (1 references) +target prot opt source destination +RETURN tcp ::/0 a:b:c::d:e:f/128 MAC 01:02:03:04:05:06 DSCP match 0x02state NEW,ESTABLISHED +RETURN tcp ::/0 a:b:c::/128 DSCP match 0x21tcp spts:100:1111 dpts:20:21 +RETURN tcp ::/0 ::10.1.2.3/128 DSCP match 0x3ftcp spt:65535 dpts:255:256 +#ip6tables -L FO-vnet0 -n +Chain FO-vnet0 (1 references) +target prot opt source destination +ACCEPT tcp a:b:c::d:e:f/128 ::/0 DSCP match 0x02state ESTABLISHED +ACCEPT tcp a:b:c::/128 ::/0 MAC 01:02:03:04:05:06 DSCP match 0x21tcp spts:20:21 dpts:100:1111 +ACCEPT tcp ::10.1.2.3/128 ::/0 MAC 01:02:03:04:05:06 DSCP match 0x3ftcp spts:255:256 dpt:65535 +#ip6tables -L HI-vnet0 -n +Chain HI-vnet0 (1 references) +target prot opt source destination +ACCEPT tcp ::/0 a:b:c::d:e:f/128 MAC 01:02:03:04:05:06 DSCP match 0x02 +ACCEPT tcp ::/0 a:b:c::/128 DSCP match 0x21tcp spts:100:1111 dpts:20:21 +ACCEPT tcp ::/0 ::10.1.2.3/128 DSCP match 0x3ftcp spt:65535 dpts:255:256 +#ip6tables -L INPUT -n --line-numbers | grep libvirt +1 libvirt-host-in all ::/0 ::/0 +#ip6tables -L libvirt-host-in -n | grep vnet0 | tr -s " " +HI-vnet0 all ::/0 ::/0 [goto] PHYSDEV match --physdev-in vnet0 +#ip6tables -L libvirt-in -n | grep vnet0 | tr -s " " +FI-vnet0 all ::/0 ::/0 [goto] PHYSDEV match --physdev-in vnet0 +#ip6tables -L libvirt-in-post -n | grep vnet0 +ACCEPT all ::/0 ::/0 PHYSDEV match --physdev-in vnet0 +#ip6tables -L libvirt-out -n | grep vnet0 | tr -s " " +FO-vnet0 all ::/0 ::/0 [goto] PHYSDEV match --physdev-out vnet0 Index: libvirt-acl/tests/nwfilterxml2fwallout/all-test.fwall =================================================================== --- /dev/null +++ libvirt-acl/tests/nwfilterxml2fwallout/all-test.fwall @@ -0,0 +1,26 @@ +#iptables -L FI-vnet0 -n +Chain FI-vnet0 (1 references) +target prot opt source destination +RETURN all -- 0.0.0.0/0 10.1.2.3 MAC 01:02:03:04:05:06 DSCP match 0x02state NEW,ESTABLISHED +RETURN all -- 0.0.0.0/0 10.1.0.0/22 DSCP match 0x21 +RETURN all -- 0.0.0.0/0 10.1.0.0/22 DSCP match 0x21 +#iptables -L FO-vnet0 -n +Chain FO-vnet0 (1 references) +target prot opt source destination +ACCEPT all -- 10.1.2.3 0.0.0.0/0 DSCP match 0x02state ESTABLISHED +ACCEPT all -- 10.1.0.0/22 0.0.0.0/0 MAC 01:02:03:04:05:06 DSCP match 0x21 +ACCEPT all -- 10.1.0.0/22 0.0.0.0/0 MAC 01:02:03:04:05:06 DSCP match 0x21 +#iptables -L HI-vnet0 -n +Chain HI-vnet0 (1 references) +target prot opt source destination +ACCEPT all -- 0.0.0.0/0 10.1.2.3 MAC 01:02:03:04:05:06 DSCP match 0x02 +ACCEPT all -- 0.0.0.0/0 10.1.0.0/22 DSCP match 0x21 +ACCEPT all -- 0.0.0.0/0 10.1.0.0/22 DSCP match 0x21 +#iptables -L libvirt-host-in -n | grep vnet0 | tr -s " " +HI-vnet0 all -- 0.0.0.0/0 0.0.0.0/0 [goto] PHYSDEV match --physdev-in vnet0 +#iptables -L libvirt-in -n | grep vnet0 | tr -s " " +FI-vnet0 all -- 0.0.0.0/0 0.0.0.0/0 [goto] PHYSDEV match --physdev-in vnet0 +#iptables -L libvirt-in-post -n | grep vnet0 +ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 PHYSDEV match --physdev-in vnet0 +#iptables -L libvirt-out -n | grep vnet0 | tr -s " " +FO-vnet0 all -- 0.0.0.0/0 0.0.0.0/0 [goto] PHYSDEV match --physdev-out vnet0 Index: libvirt-acl/tests/nwfilterxml2fwallout/icmp-test.fwall =================================================================== --- /dev/null +++ libvirt-acl/tests/nwfilterxml2fwallout/icmp-test.fwall @@ -0,0 +1,23 @@ +#iptables -L FI-vnet0 -n +Chain FI-vnet0 (1 references) +target prot opt source destination +RETURN icmp -- 0.0.0.0/0 10.1.2.3 MAC 01:02:03:04:05:06 DSCP match 0x02icmp type 12 code 11 state NEW,ESTABLISHED +RETURN icmp -- 0.0.0.0/0 10.1.0.0/22 DSCP match 0x21 +#iptables -L FO-vnet0 -n +Chain FO-vnet0 (1 references) +target prot opt source destination +ACCEPT icmp -- 10.1.0.0/22 0.0.0.0/0 MAC 01:02:03:04:05:06 DSCP match 0x21icmp type 255 code 255 +ACCEPT icmp -- 10.1.0.0/22 0.0.0.0/0 MAC 01:02:03:04:05:06 DSCP match 0x21 +#iptables -L HI-vnet0 -n +Chain HI-vnet0 (1 references) +target prot opt source destination +ACCEPT icmp -- 0.0.0.0/0 10.1.2.3 MAC 01:02:03:04:05:06 DSCP match 0x02icmp type 12 code 11 +ACCEPT icmp -- 0.0.0.0/0 10.1.0.0/22 DSCP match 0x21 +#iptables -L libvirt-host-in -n | grep vnet0 | tr -s " " +HI-vnet0 all -- 0.0.0.0/0 0.0.0.0/0 [goto] PHYSDEV match --physdev-in vnet0 +#iptables -L libvirt-in -n | grep vnet0 | tr -s " " +FI-vnet0 all -- 0.0.0.0/0 0.0.0.0/0 [goto] PHYSDEV match --physdev-in vnet0 +#iptables -L libvirt-in-post -n | grep vnet0 +ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 PHYSDEV match --physdev-in vnet0 +#iptables -L libvirt-out -n | grep vnet0 | tr -s " " +FO-vnet0 all -- 0.0.0.0/0 0.0.0.0/0 [goto] PHYSDEV match --physdev-out vnet0 Index: libvirt-acl/tests/nwfilterxml2fwallout/igmp-test.fwall =================================================================== --- /dev/null +++ libvirt-acl/tests/nwfilterxml2fwallout/igmp-test.fwall @@ -0,0 +1,26 @@ +#iptables -L FI-vnet0 -n +Chain FI-vnet0 (1 references) +target prot opt source destination +RETURN 2 -- 0.0.0.0/0 10.1.2.3 MAC 01:02:03:04:05:06 DSCP match 0x02state NEW,ESTABLISHED +RETURN 2 -- 0.0.0.0/0 10.1.0.0/22 DSCP match 0x21 +RETURN 2 -- 0.0.0.0/0 10.1.0.0/22 DSCP match 0x21 +#iptables -L FO-vnet0 -n +Chain FO-vnet0 (1 references) +target prot opt source destination +ACCEPT 2 -- 10.1.2.3 0.0.0.0/0 DSCP match 0x02state ESTABLISHED +ACCEPT 2 -- 10.1.0.0/22 0.0.0.0/0 MAC 01:02:03:04:05:06 DSCP match 0x21 +ACCEPT 2 -- 10.1.0.0/22 0.0.0.0/0 MAC 01:02:03:04:05:06 DSCP match 0x21 +#iptables -L HI-vnet0 -n +Chain HI-vnet0 (1 references) +target prot opt source destination +ACCEPT 2 -- 0.0.0.0/0 10.1.2.3 MAC 01:02:03:04:05:06 DSCP match 0x02 +ACCEPT 2 -- 0.0.0.0/0 10.1.0.0/22 DSCP match 0x21 +ACCEPT 2 -- 0.0.0.0/0 10.1.0.0/22 DSCP match 0x21 +#iptables -L libvirt-host-in -n | grep vnet0 | tr -s " " +HI-vnet0 all -- 0.0.0.0/0 0.0.0.0/0 [goto] PHYSDEV match --physdev-in vnet0 +#iptables -L libvirt-in -n | grep vnet0 | tr -s " " +FI-vnet0 all -- 0.0.0.0/0 0.0.0.0/0 [goto] PHYSDEV match --physdev-in vnet0 +#iptables -L libvirt-in-post -n | grep vnet0 +ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 PHYSDEV match --physdev-in vnet0 +#iptables -L libvirt-out -n | grep vnet0 | tr -s " " +FO-vnet0 all -- 0.0.0.0/0 0.0.0.0/0 [goto] PHYSDEV match --physdev-out vnet0 Index: libvirt-acl/tests/nwfilterxml2fwallout/icmpv6-test.fwall =================================================================== --- /dev/null +++ libvirt-acl/tests/nwfilterxml2fwallout/icmpv6-test.fwall @@ -0,0 +1,26 @@ +#ip6tables -L FI-vnet0 -n +Chain FI-vnet0 (1 references) +target prot opt source destination +RETURN icmpv6 f:e:d::c:b:a/127 a:b:c::d:e:f/128 MAC 01:02:03:04:05:06 DSCP match 0x02ipv6-icmp type 12 code 11 state NEW,ESTABLISHED +RETURN icmpv6 ::/0 ::10.1.2.3/128 DSCP match 0x21 +#ip6tables -L FO-vnet0 -n +Chain FO-vnet0 (1 references) +target prot opt source destination +ACCEPT icmpv6 a:b:c::/128 ::/0 MAC 01:02:03:04:05:06 DSCP match 0x21ipv6-icmp type 255 code 255 +ACCEPT icmpv6 ::10.1.2.3/128 ::/0 MAC 01:02:03:04:05:06 DSCP match 0x21 +#ip6tables -L HI-vnet0 -n +Chain HI-vnet0 (1 references) +target prot opt source destination +ACCEPT icmpv6 f:e:d::c:b:a/127 a:b:c::d:e:f/128 MAC 01:02:03:04:05:06 DSCP match 0x02ipv6-icmp type 12 code 11 +ACCEPT icmpv6 ::/0 ::10.1.2.3/128 DSCP match 0x21 +#ip6tables -L INPUT -n --line-numbers | grep libvirt +1 libvirt-host-in all ::/0 ::/0 +#ip6tables -L libvirt-host-in -n | grep vnet0 | tr -s " " +HI-vnet0 all ::/0 ::/0 [goto] PHYSDEV match --physdev-in vnet0 +#ip6tables -L libvirt-in -n | grep vnet0 | tr -s " " +FI-vnet0 all ::/0 ::/0 [goto] PHYSDEV match --physdev-in vnet0 +#ip6tables -L libvirt-in-post -n | grep vnet0 +ACCEPT all ::/0 ::/0 PHYSDEV match --physdev-in vnet0 +#ip6tables -L libvirt-out -n | grep vnet0 | tr -s " " +FO-vnet0 all ::/0 ::/0 [goto] PHYSDEV match --physdev-out vnet0 + Index: libvirt-acl/tests/nwfilterxml2fwallout/udp-ipv6-test.xml =================================================================== --- /dev/null +++ libvirt-acl/tests/nwfilterxml2fwallout/udp-ipv6-test.xml @@ -0,0 +1,29 @@ +#ip6tables -L FI-vnet0 -n +Chain FI-vnet0 (1 references) +target prot opt source destination +RETURN udp ::/0 a:b:c::d:e:f/128 MAC 01:02:03:04:05:06 DSCP match 0x02state NEW,ESTABLISHED +RETURN udp ::/0 ::/0 DSCP match 0x21udp spts:100:1111 dpts:20:21 +RETURN udp ::/0 ::10.1.2.3/128 DSCP match 0x3fudp spt:65535 dpts:255:256 +#ip6tables -L FO-vnet0 -n +Chain FO-vnet0 (1 references) +target prot opt source destination +ACCEPT udp a:b:c::d:e:f/128 ::/0 DSCP match 0x02state ESTABLISHED +ACCEPT udp ::/0 ::/0 MAC 01:02:03:04:05:06 DSCP match 0x21udp spts:20:21 dpts:100:1111 +ACCEPT udp ::10.1.2.3/128 ::/0 MAC 01:02:03:04:05:06 DSCP match 0x3fudp spts:255:256 dpt:65535 +#ip6tables -L HI-vnet0 -n +Chain HI-vnet0 (1 references) +target prot opt source destination +ACCEPT udp ::/0 a:b:c::d:e:f/128 MAC 01:02:03:04:05:06 DSCP match 0x02 +ACCEPT udp ::/0 ::/0 DSCP match 0x21udp spts:100:1111 dpts:20:21 +ACCEPT udp ::/0 ::10.1.2.3/128 DSCP match 0x3fudp spt:65535 dpts:255:256 + +#ip6tables -L INPUT -n --line-numbers | grep libvirt +1 libvirt-host-in all ::/0 ::/0 +#ip6tables -L libvirt-host-in -n | grep vnet0 +HI-vnet0 all ::/0 ::/0 [goto] PHYSDEV match --physdev-in vnet0 +#ip6tables -L libvirt-in -n | grep vnet0 +FI-vnet0 all ::/0 ::/0 [goto] PHYSDEV match --physdev-in vnet0 +#ip6tables -L libvirt-in-post -n | grep vnet0 +ACCEPT all ::/0 ::/0 PHYSDEV match --physdev-in vnet0 +#ip6tables -L libvirt-out -n | grep vnet0 +FO-vnet0 all ::/0 ::/0 [goto] PHYSDEV match --physdev-out vnet0 Index: libvirt-acl/tests/nwfilterxml2fwallout/sctp-ipv6-test.xml =================================================================== --- /dev/null +++ libvirt-acl/tests/nwfilterxml2fwallout/sctp-ipv6-test.xml @@ -0,0 +1,29 @@ +#ip6tables -L FI-vnet0 -n +Chain FI-vnet0 (1 references) +target prot opt source destination +RETURN sctp ::/0 a:b:c::d:e:f/128 MAC 01:02:03:04:05:06 DSCP match 0x02state NEW,ESTABLISHED +RETURN sctp ::/0 a:b:c::/128 DSCP match 0x21sctp spts:100:1111 dpts:20:21 +RETURN sctp ::/0 ::10.1.2.3/128 DSCP match 0x3fsctp spt:65535 dpts:255:256 +#ip6tables -L FO-vnet0 -n +Chain FO-vnet0 (1 references) +target prot opt source destination +ACCEPT sctp a:b:c::d:e:f/128 ::/0 DSCP match 0x02state ESTABLISHED +ACCEPT sctp a:b:c::/128 ::/0 MAC 01:02:03:04:05:06 DSCP match 0x21sctp spts:20:21 dpts:100:1111 +ACCEPT sctp ::10.1.2.3/128 ::/0 MAC 01:02:03:04:05:06 DSCP match 0x3fsctp spts:255:256 dpt:65535 +#ip6tables -L HI-vnet0 -n +Chain HI-vnet0 (1 references) +target prot opt source destination +ACCEPT sctp ::/0 a:b:c::d:e:f/128 MAC 01:02:03:04:05:06 DSCP match 0x02 +ACCEPT sctp ::/0 a:b:c::/128 DSCP match 0x21sctp spts:100:1111 dpts:20:21 +ACCEPT sctp ::/0 ::10.1.2.3/128 DSCP match 0x3fsctp spt:65535 dpts:255:256 + +#ip6tables -L INPUT -n --line-numbers | grep libvirt +1 libvirt-host-in all ::/0 ::/0 +#ip6tables -L libvirt-host-in -n | grep vnet0 +HI-vnet0 all ::/0 ::/0 [goto] PHYSDEV match --physdev-in vnet0 +#ip6tables -L libvirt-in -n | grep vnet0 +FI-vnet0 all ::/0 ::/0 [goto] PHYSDEV match --physdev-in vnet0 +#ip6tables -L libvirt-in-post -n | grep vnet0 +ACCEPT all ::/0 ::/0 PHYSDEV match --physdev-in vnet0 +#ip6tables -L libvirt-out -n | grep vnet0 +FO-vnet0 all ::/0 ::/0 [goto] PHYSDEV match --physdev-out vnet0 Index: libvirt-acl/tests/nwfilterxml2fwallout/ah-ipv6-test.fwall =================================================================== --- /dev/null +++ libvirt-acl/tests/nwfilterxml2fwallout/ah-ipv6-test.fwall @@ -0,0 +1,28 @@ +#ip6tables -L FI-vnet0 -n +Chain FI-vnet0 (1 references) +target prot opt source destination +RETURN ah f:e:d::c:b:a/127 a:b:c::d:e:f/128 MAC 01:02:03:04:05:06 DSCP match 0x02state NEW,ESTABLISHED +RETURN ah ::/0 a:b:c::/128 DSCP match 0x21 +RETURN ah ::/0 ::10.1.2.3/128 DSCP match 0x21 +#ip6tables -L FO-vnet0 -n +Chain FO-vnet0 (1 references) +target prot opt source destination +ACCEPT ah a:b:c::d:e:f/128 f:e:d::c:b:a/127 DSCP match 0x02state ESTABLISHED +ACCEPT ah a:b:c::/128 ::/0 MAC 01:02:03:04:05:06 DSCP match 0x21 +ACCEPT ah ::10.1.2.3/128 ::/0 MAC 01:02:03:04:05:06 DSCP match 0x21 +#ip6tables -L HI-vnet0 -n +Chain HI-vnet0 (1 references) +target prot opt source destination +ACCEPT ah f:e:d::c:b:a/127 a:b:c::d:e:f/128 MAC 01:02:03:04:05:06 DSCP match 0x02 +ACCEPT ah ::/0 a:b:c::/128 DSCP match 0x21 +ACCEPT ah ::/0 ::10.1.2.3/128 DSCP match 0x21 +#ip6tables -L INPUT -n --line-numbers | grep libvirt +1 libvirt-host-in all ::/0 ::/0 +#ip6tables -L libvirt-host-in -n | grep vnet0 | tr -s " " +HI-vnet0 all ::/0 ::/0 [goto] PHYSDEV match --physdev-in vnet0 +#ip6tables -L libvirt-in -n | grep vnet0 | tr -s " " +FI-vnet0 all ::/0 ::/0 [goto] PHYSDEV match --physdev-in vnet0 +#ip6tables -L libvirt-in-post -n | grep vnet0 +ACCEPT all ::/0 ::/0 PHYSDEV match --physdev-in vnet0 +#ip6tables -L libvirt-out -n | grep vnet0 | tr -s " " +FO-vnet0 all ::/0 ::/0 [goto] PHYSDEV match --physdev-out vnet0 Index: libvirt-acl/tests/nwfilterxml2fwallout/ah-test.fwall =================================================================== --- /dev/null +++ libvirt-acl/tests/nwfilterxml2fwallout/ah-test.fwall @@ -0,0 +1,26 @@ +#iptables -L FI-vnet0 -n +Chain FI-vnet0 (1 references) +target prot opt source destination +RETURN ah -- 0.0.0.0/0 10.1.2.3 MAC 01:02:03:04:05:06 DSCP match 0x02state NEW,ESTABLISHED +RETURN ah -- 0.0.0.0/0 10.1.0.0/22 DSCP match 0x21 +RETURN ah -- 0.0.0.0/0 10.1.0.0/22 DSCP match 0x21 +#iptables -L FO-vnet0 -n +Chain FO-vnet0 (1 references) +target prot opt source destination +ACCEPT ah -- 10.1.2.3 0.0.0.0/0 DSCP match 0x02state ESTABLISHED +ACCEPT ah -- 10.1.0.0/22 0.0.0.0/0 MAC 01:02:03:04:05:06 DSCP match 0x21 +ACCEPT ah -- 10.1.0.0/22 0.0.0.0/0 MAC 01:02:03:04:05:06 DSCP match 0x21 +#iptables -L HI-vnet0 -n +Chain HI-vnet0 (1 references) +target prot opt source destination +ACCEPT ah -- 0.0.0.0/0 10.1.2.3 MAC 01:02:03:04:05:06 DSCP match 0x02 +ACCEPT ah -- 0.0.0.0/0 10.1.0.0/22 DSCP match 0x21 +ACCEPT ah -- 0.0.0.0/0 10.1.0.0/22 DSCP match 0x21 +#iptables -L libvirt-host-in -n | grep vnet0 | tr -s " " +HI-vnet0 all -- 0.0.0.0/0 0.0.0.0/0 [goto] PHYSDEV match --physdev-in vnet0 +#iptables -L libvirt-in -n | grep vnet0 | tr -s " " +FI-vnet0 all -- 0.0.0.0/0 0.0.0.0/0 [goto] PHYSDEV match --physdev-in vnet0 +#iptables -L libvirt-in-post -n | grep vnet0 +ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 PHYSDEV match --physdev-in vnet0 +#iptables -L libvirt-out -n | grep vnet0 | tr -s " " +FO-vnet0 all -- 0.0.0.0/0 0.0.0.0/0 [goto] PHYSDEV match --physdev-out vnet0 Index: libvirt-acl/tests/nwfilterxml2fwallout/all-ipv6-test.fwall =================================================================== --- /dev/null +++ libvirt-acl/tests/nwfilterxml2fwallout/all-ipv6-test.fwall @@ -0,0 +1,28 @@ +#ip6tables -L FI-vnet0 -n +Chain FI-vnet0 (1 references) +target prot opt source destination +RETURN all f:e:d::c:b:a/127 a:b:c::d:e:f/128 MAC 01:02:03:04:05:06 DSCP match 0x02state NEW,ESTABLISHED +RETURN all ::/0 a:b:c::/128 DSCP match 0x21 +RETURN all ::/0 ::10.1.2.3/128 DSCP match 0x21 +#ip6tables -L FO-vnet0 -n +Chain FO-vnet0 (1 references) +target prot opt source destination +ACCEPT all a:b:c::d:e:f/128 f:e:d::c:b:a/127 DSCP match 0x02state ESTABLISHED +ACCEPT all a:b:c::/128 ::/0 MAC 01:02:03:04:05:06 DSCP match 0x21 +ACCEPT all ::10.1.2.3/128 ::/0 MAC 01:02:03:04:05:06 DSCP match 0x21 +#ip6tables -L HI-vnet0 -n +Chain HI-vnet0 (1 references) +target prot opt source destination +ACCEPT all f:e:d::c:b:a/127 a:b:c::d:e:f/128 MAC 01:02:03:04:05:06 DSCP match 0x02 +ACCEPT all ::/0 a:b:c::/128 DSCP match 0x21 +ACCEPT all ::/0 ::10.1.2.3/128 DSCP match 0x21 +#ip6tables -L INPUT -n --line-numbers | grep libvirt +1 libvirt-host-in all ::/0 ::/0 +#ip6tables -L libvirt-host-in -n | grep vnet0 | tr -s " " +HI-vnet0 all ::/0 ::/0 [goto] PHYSDEV match --physdev-in vnet0 +#ip6tables -L libvirt-in -n | grep vnet0 | tr -s " " +FI-vnet0 all ::/0 ::/0 [goto] PHYSDEV match --physdev-in vnet0 +#ip6tables -L libvirt-in-post -n | grep vnet0 +ACCEPT all ::/0 ::/0 PHYSDEV match --physdev-in vnet0 +#ip6tables -L libvirt-out -n | grep vnet0 | tr -s " " +FO-vnet0 all ::/0 ::/0 [goto] PHYSDEV match --physdev-out vnet0 Index: libvirt-acl/tests/nwfilterxml2fwallout/esp-ipv6-test.fwall =================================================================== --- /dev/null +++ libvirt-acl/tests/nwfilterxml2fwallout/esp-ipv6-test.fwall @@ -0,0 +1,28 @@ +#ip6tables -L FI-vnet0 -n +Chain FI-vnet0 (1 references) +target prot opt source destination +RETURN esp f:e:d::c:b:a/127 a:b:c::d:e:f/128 MAC 01:02:03:04:05:06 DSCP match 0x02state NEW,ESTABLISHED +RETURN esp ::/0 a:b:c::/128 DSCP match 0x21 +RETURN esp ::/0 ::10.1.2.3/128 DSCP match 0x21 +#ip6tables -L FO-vnet0 -n +Chain FO-vnet0 (1 references) +target prot opt source destination +ACCEPT esp a:b:c::d:e:f/128 f:e:d::c:b:a/127 DSCP match 0x02state ESTABLISHED +ACCEPT esp a:b:c::/128 ::/0 MAC 01:02:03:04:05:06 DSCP match 0x21 +ACCEPT esp ::10.1.2.3/128 ::/0 MAC 01:02:03:04:05:06 DSCP match 0x21 +#ip6tables -L HI-vnet0 -n +Chain HI-vnet0 (1 references) +target prot opt source destination +ACCEPT esp f:e:d::c:b:a/127 a:b:c::d:e:f/128 MAC 01:02:03:04:05:06 DSCP match 0x02 +ACCEPT esp ::/0 a:b:c::/128 DSCP match 0x21 +ACCEPT esp ::/0 ::10.1.2.3/128 DSCP match 0x21 +#ip6tables -L INPUT -n --line-numbers | grep libvirt +1 libvirt-host-in all ::/0 ::/0 +#ip6tables -L libvirt-host-in -n | grep vnet0 |tr -s " " +HI-vnet0 all ::/0 ::/0 [goto] PHYSDEV match --physdev-in vnet0 +#ip6tables -L libvirt-in -n | grep vnet0 | tr -s " " +FI-vnet0 all ::/0 ::/0 [goto] PHYSDEV match --physdev-in vnet0 +#ip6tables -L libvirt-in-post -n | grep vnet0 +ACCEPT all ::/0 ::/0 PHYSDEV match --physdev-in vnet0 +#ip6tables -L libvirt-out -n | grep vnet0 | tr -s " " +FO-vnet0 all ::/0 ::/0 [goto] PHYSDEV match --physdev-out vnet0 Index: libvirt-acl/tests/nwfilterxml2fwallout/esp-test.fwall =================================================================== --- /dev/null +++ libvirt-acl/tests/nwfilterxml2fwallout/esp-test.fwall @@ -0,0 +1,26 @@ +#iptables -L FI-vnet0 -n +Chain FI-vnet0 (1 references) +target prot opt source destination +RETURN esp -- 0.0.0.0/0 10.1.2.3 MAC 01:02:03:04:05:06 DSCP match 0x02state NEW,ESTABLISHED +RETURN esp -- 0.0.0.0/0 10.1.0.0/22 DSCP match 0x21 +RETURN esp -- 0.0.0.0/0 10.1.0.0/22 DSCP match 0x21 +#iptables -L FO-vnet0 -n +Chain FO-vnet0 (1 references) +target prot opt source destination +ACCEPT esp -- 10.1.2.3 0.0.0.0/0 DSCP match 0x02state ESTABLISHED +ACCEPT esp -- 10.1.0.0/22 0.0.0.0/0 MAC 01:02:03:04:05:06 DSCP match 0x21 +ACCEPT esp -- 10.1.0.0/22 0.0.0.0/0 MAC 01:02:03:04:05:06 DSCP match 0x21 +#iptables -L HI-vnet0 -n +Chain HI-vnet0 (1 references) +target prot opt source destination +ACCEPT esp -- 0.0.0.0/0 10.1.2.3 MAC 01:02:03:04:05:06 DSCP match 0x02 +ACCEPT esp -- 0.0.0.0/0 10.1.0.0/22 DSCP match 0x21 +ACCEPT esp -- 0.0.0.0/0 10.1.0.0/22 DSCP match 0x21 +#iptables -L libvirt-host-in -n | grep vnet0 | tr -s " " +HI-vnet0 all -- 0.0.0.0/0 0.0.0.0/0 [goto] PHYSDEV match --physdev-in vnet0 +#iptables -L libvirt-in -n | grep vnet0 | tr -s " " +FI-vnet0 all -- 0.0.0.0/0 0.0.0.0/0 [goto] PHYSDEV match --physdev-in vnet0 +#iptables -L libvirt-in-post -n | grep vnet0 +ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 PHYSDEV match --physdev-in vnet0 +#iptables -L libvirt-out -n | grep vnet0 | tr -s " " +FO-vnet0 all -- 0.0.0.0/0 0.0.0.0/0 [goto] PHYSDEV match --physdev-out vnet0 Index: libvirt-acl/tests/nwfilterxml2fwallout/sctp-ipv6-test.fwall =================================================================== --- /dev/null +++ libvirt-acl/tests/nwfilterxml2fwallout/sctp-ipv6-test.fwall @@ -0,0 +1,28 @@ +#ip6tables -L FI-vnet0 -n +Chain FI-vnet0 (1 references) +target prot opt source destination +RETURN sctp ::/0 a:b:c::d:e:f/128 MAC 01:02:03:04:05:06 DSCP match 0x02state NEW,ESTABLISHED +RETURN sctp ::/0 a:b:c::/128 DSCP match 0x21sctp spts:100:1111 dpts:20:21 +RETURN sctp ::/0 ::10.1.2.3/128 DSCP match 0x3fsctp spt:65535 dpts:255:256 +#ip6tables -L FO-vnet0 -n +Chain FO-vnet0 (1 references) +target prot opt source destination +ACCEPT sctp a:b:c::d:e:f/128 ::/0 DSCP match 0x02state ESTABLISHED +ACCEPT sctp a:b:c::/128 ::/0 MAC 01:02:03:04:05:06 DSCP match 0x21sctp spts:20:21 dpts:100:1111 +ACCEPT sctp ::10.1.2.3/128 ::/0 MAC 01:02:03:04:05:06 DSCP match 0x3fsctp spts:255:256 dpt:65535 +#ip6tables -L HI-vnet0 -n +Chain HI-vnet0 (1 references) +target prot opt source destination +ACCEPT sctp ::/0 a:b:c::d:e:f/128 MAC 01:02:03:04:05:06 DSCP match 0x02 +ACCEPT sctp ::/0 a:b:c::/128 DSCP match 0x21sctp spts:100:1111 dpts:20:21 +ACCEPT sctp ::/0 ::10.1.2.3/128 DSCP match 0x3fsctp spt:65535 dpts:255:256 +#ip6tables -L INPUT -n --line-numbers | grep libvirt +1 libvirt-host-in all ::/0 ::/0 +#ip6tables -L libvirt-host-in -n | grep vnet0 | tr -s " " +HI-vnet0 all ::/0 ::/0 [goto] PHYSDEV match --physdev-in vnet0 +#ip6tables -L libvirt-in -n | grep vnet0 | tr -s " " +FI-vnet0 all ::/0 ::/0 [goto] PHYSDEV match --physdev-in vnet0 +#ip6tables -L libvirt-in-post -n | grep vnet0 +ACCEPT all ::/0 ::/0 PHYSDEV match --physdev-in vnet0 +#ip6tables -L libvirt-out -n | grep vnet0 | tr -s " " +FO-vnet0 all ::/0 ::/0 [goto] PHYSDEV match --physdev-out vnet0 Index: libvirt-acl/tests/nwfilterxml2fwallout/udp-ipv6-test.fwall =================================================================== --- /dev/null +++ libvirt-acl/tests/nwfilterxml2fwallout/udp-ipv6-test.fwall @@ -0,0 +1,28 @@ +#ip6tables -L FI-vnet0 -n +Chain FI-vnet0 (1 references) +target prot opt source destination +RETURN udp ::/0 a:b:c::d:e:f/128 MAC 01:02:03:04:05:06 DSCP match 0x02state NEW,ESTABLISHED +RETURN udp ::/0 ::/0 DSCP match 0x21udp spts:100:1111 dpts:20:21 +RETURN udp ::/0 ::10.1.2.3/128 DSCP match 0x3fudp spt:65535 dpts:255:256 +#ip6tables -L FO-vnet0 -n +Chain FO-vnet0 (1 references) +target prot opt source destination +ACCEPT udp a:b:c::d:e:f/128 ::/0 DSCP match 0x02state ESTABLISHED +ACCEPT udp ::/0 ::/0 MAC 01:02:03:04:05:06 DSCP match 0x21udp spts:20:21 dpts:100:1111 +ACCEPT udp ::10.1.2.3/128 ::/0 MAC 01:02:03:04:05:06 DSCP match 0x3fudp spts:255:256 dpt:65535 +#ip6tables -L HI-vnet0 -n +Chain HI-vnet0 (1 references) +target prot opt source destination +ACCEPT udp ::/0 a:b:c::d:e:f/128 MAC 01:02:03:04:05:06 DSCP match 0x02 +ACCEPT udp ::/0 ::/0 DSCP match 0x21udp spts:100:1111 dpts:20:21 +ACCEPT udp ::/0 ::10.1.2.3/128 DSCP match 0x3fudp spt:65535 dpts:255:256 +#ip6tables -L INPUT -n --line-numbers | grep libvirt +1 libvirt-host-in all ::/0 ::/0 +#ip6tables -L libvirt-host-in -n | grep vnet0 | tr -s " " +HI-vnet0 all ::/0 ::/0 [goto] PHYSDEV match --physdev-in vnet0 +#ip6tables -L libvirt-in -n | grep vnet0 | tr -s " " +FI-vnet0 all ::/0 ::/0 [goto] PHYSDEV match --physdev-in vnet0 +#ip6tables -L libvirt-in-post -n | grep vnet0 +ACCEPT all ::/0 ::/0 PHYSDEV match --physdev-in vnet0 +#ip6tables -L libvirt-out -n | grep vnet0 | tr -s " " +FO-vnet0 all ::/0 ::/0 [goto] PHYSDEV match --physdev-out vnet0 Index: libvirt-acl/tests/nwfilterxml2fwallout/udplite-ipv6-test.fwall =================================================================== --- /dev/null +++ libvirt-acl/tests/nwfilterxml2fwallout/udplite-ipv6-test.fwall @@ -0,0 +1,28 @@ +#ip6tables -L FI-vnet0 -n +Chain FI-vnet0 (1 references) +target prot opt source destination +RETURN udplite f:e:d::c:b:a/127 a:b:c::d:e:f/128 MAC 01:02:03:04:05:06 DSCP match 0x02state NEW,ESTABLISHED +RETURN udplite ::/0 a:b:c::/128 DSCP match 0x21 +RETURN udplite ::/0 ::10.1.2.3/128 DSCP match 0x21 +#ip6tables -L FO-vnet0 -n +Chain FO-vnet0 (1 references) +target prot opt source destination +ACCEPT udplite a:b:c::d:e:f/128 f:e:d::c:b:a/127 DSCP match 0x02state ESTABLISHED +ACCEPT udplite a:b:c::/128 ::/0 MAC 01:02:03:04:05:06 DSCP match 0x21 +ACCEPT udplite ::10.1.2.3/128 ::/0 MAC 01:02:03:04:05:06 DSCP match 0x21 +#ip6tables -L HI-vnet0 -n +Chain HI-vnet0 (1 references) +target prot opt source destination +ACCEPT udplite f:e:d::c:b:a/127 a:b:c::d:e:f/128 MAC 01:02:03:04:05:06 DSCP match 0x02 +ACCEPT udplite ::/0 a:b:c::/128 DSCP match 0x21 +ACCEPT udplite ::/0 ::10.1.2.3/128 DSCP match 0x21 +#ip6tables -L INPUT -n --line-numbers | grep libvirt +1 libvirt-host-in all ::/0 ::/0 +#ip6tables -L libvirt-host-in -n | grep vnet0 | tr -s " " +HI-vnet0 all ::/0 ::/0 [goto] PHYSDEV match --physdev-in vnet0 +#ip6tables -L libvirt-in -n | grep vnet0 | tr -s " " +FI-vnet0 all ::/0 ::/0 [goto] PHYSDEV match --physdev-in vnet0 +#ip6tables -L libvirt-in-post -n | grep vnet0 +ACCEPT all ::/0 ::/0 PHYSDEV match --physdev-in vnet0 +#ip6tables -L libvirt-out -n | grep vnet0 | tr -s " " +FO-vnet0 all ::/0 ::/0 [goto] PHYSDEV match --physdev-out vnet0 Index: libvirt-acl/tests/nwfilterxml2fwallout/udplite-test.fwall =================================================================== --- /dev/null +++ libvirt-acl/tests/nwfilterxml2fwallout/udplite-test.fwall @@ -0,0 +1,26 @@ +#iptables -L FI-vnet0 -n +Chain FI-vnet0 (1 references) +target prot opt source destination +RETURN udplite-- 0.0.0.0/0 10.1.2.3 MAC 01:02:03:04:05:06 DSCP match 0x02state NEW,ESTABLISHED +RETURN udplite-- 0.0.0.0/0 10.1.0.0/22 DSCP match 0x21 +RETURN udplite-- 0.0.0.0/0 10.1.0.0/22 DSCP match 0x21 +#iptables -L FO-vnet0 -n +Chain FO-vnet0 (1 references) +target prot opt source destination +ACCEPT udplite-- 10.1.2.3 0.0.0.0/0 DSCP match 0x02state ESTABLISHED +ACCEPT udplite-- 10.1.0.0/22 0.0.0.0/0 MAC 01:02:03:04:05:06 DSCP match 0x21 +ACCEPT udplite-- 10.1.0.0/22 0.0.0.0/0 MAC 01:02:03:04:05:06 DSCP match 0x21 +#iptables -L HI-vnet0 -n +Chain HI-vnet0 (1 references) +target prot opt source destination +ACCEPT udplite-- 0.0.0.0/0 10.1.2.3 MAC 01:02:03:04:05:06 DSCP match 0x02 +ACCEPT udplite-- 0.0.0.0/0 10.1.0.0/22 DSCP match 0x21 +ACCEPT udplite-- 0.0.0.0/0 10.1.0.0/22 DSCP match 0x21 +#iptables -L libvirt-host-in -n | grep vnet0 | tr -s " " +HI-vnet0 all -- 0.0.0.0/0 0.0.0.0/0 [goto] PHYSDEV match --physdev-in vnet0 +#iptables -L libvirt-in -n | grep vnet0 | tr -s " " +FI-vnet0 all -- 0.0.0.0/0 0.0.0.0/0 [goto] PHYSDEV match --physdev-in vnet0 +#iptables -L libvirt-in-post -n | grep vnet0 +ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 PHYSDEV match --physdev-in vnet0 +#iptables -L libvirt-out -n | grep vnet0 | tr -s " " +FO-vnet0 all -- 0.0.0.0/0 0.0.0.0/0 [goto] PHYSDEV match --physdev-out vnet0 Index: libvirt-acl/tests/nwfilterxml2fwallout/ipt-no-macspoof-test.fwall =================================================================== --- /dev/null +++ libvirt-acl/tests/nwfilterxml2fwallout/ipt-no-macspoof-test.fwall @@ -0,0 +1,19 @@ +#iptables -L FI-vnet0 -n +Chain FI-vnet0 (1 references) +target prot opt source destination +#iptables -L FO-vnet0 -n +Chain FO-vnet0 (1 references) +target prot opt source destination +DROP all -- 0.0.0.0/0 0.0.0.0/0 MAC ! 12:34:56:78:9A:BC +DROP all -- 0.0.0.0/0 0.0.0.0/0 MAC ! AA:AA:AA:AA:AA:AA +#iptables -L HI-vnet0 +Chain HI-vnet0 (1 references) +target prot opt source destination +#iptables -L libvirt-host-in -n | grep vnet0 | tr -s " " +HI-vnet0 all -- 0.0.0.0/0 0.0.0.0/0 [goto] PHYSDEV match --physdev-in vnet0 +#iptables -L libvirt-in -n | grep vnet0 | tr -s " " +FI-vnet0 all -- 0.0.0.0/0 0.0.0.0/0 [goto] PHYSDEV match --physdev-in vnet0 +#iptables -L libvirt-in-post -n | grep vnet0 +ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 PHYSDEV match --physdev-in vnet0 +#iptables -L libvirt-out -n | grep vnet0 | tr -s " " +FO-vnet0 all -- 0.0.0.0/0 0.0.0.0/0 [goto] PHYSDEV match --physdev-out vnet0 Index: libvirt-acl/tests/nwfilterxml2fwallout/icmp-direction-test.fwall =================================================================== --- /dev/null +++ libvirt-acl/tests/nwfilterxml2fwallout/icmp-direction-test.fwall @@ -0,0 +1,23 @@ +#iptables -L FI-vnet0 -n +Chain FI-vnet0 (1 references) +target prot opt source destination +RETURN icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 8 state NEW,ESTABLISHED +DROP icmp -- 0.0.0.0/0 0.0.0.0/0 +#iptables -L FO-vnet0 -n +Chain FO-vnet0 (1 references) +target prot opt source destination +ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 0 +DROP icmp -- 0.0.0.0/0 0.0.0.0/0 +#iptables -L HI-vnet0 -n +Chain HI-vnet0 (1 references) +target prot opt source destination +ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 8 +DROP icmp -- 0.0.0.0/0 0.0.0.0/0 +#iptables -L libvirt-host-in -n | grep vnet0 | tr -s " " +HI-vnet0 all -- 0.0.0.0/0 0.0.0.0/0 [goto] PHYSDEV match --physdev-in vnet0 +#iptables -L libvirt-in -n | grep vnet0 | tr -s " " +FI-vnet0 all -- 0.0.0.0/0 0.0.0.0/0 [goto] PHYSDEV match --physdev-in vnet0 +#iptables -L libvirt-in-post -n | grep vnet0 +ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 PHYSDEV match --physdev-in vnet0 +#iptables -L libvirt-out -n | grep vnet0 | tr -s " " +FO-vnet0 all -- 0.0.0.0/0 0.0.0.0/0 [goto] PHYSDEV match --physdev-out vnet0 Index: libvirt-acl/tests/nwfilterxml2fwallout/icmp-direction2-test.fwall =================================================================== --- /dev/null +++ libvirt-acl/tests/nwfilterxml2fwallout/icmp-direction2-test.fwall @@ -0,0 +1,23 @@ +#iptables -L FI-vnet0 -n +Chain FI-vnet0 (1 references) +target prot opt source destination +RETURN icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 0 state NEW,ESTABLISHED +DROP icmp -- 0.0.0.0/0 0.0.0.0/0 +#iptables -L FO-vnet0 -n +Chain FO-vnet0 (1 references) +target prot opt source destination +ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 8 +DROP icmp -- 0.0.0.0/0 0.0.0.0/0 +#iptables -L HI-vnet0 -n +Chain HI-vnet0 (1 references) +target prot opt source destination +ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 0 +DROP icmp -- 0.0.0.0/0 0.0.0.0/0 +#iptables -L libvirt-host-in -n | grep vnet0 | tr -s " " +HI-vnet0 all -- 0.0.0.0/0 0.0.0.0/0 [goto] PHYSDEV match --physdev-in vnet0 +#iptables -L libvirt-in -n | grep vnet0 | tr -s " " +FI-vnet0 all -- 0.0.0.0/0 0.0.0.0/0 [goto] PHYSDEV match --physdev-in vnet0 +#iptables -L libvirt-in-post -n | grep vnet0 +ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 PHYSDEV match --physdev-in vnet0 +#iptables -L libvirt-out -n | grep vnet0 | tr -s " " +FO-vnet0 all -- 0.0.0.0/0 0.0.0.0/0 [goto] PHYSDEV match --physdev-out vnet0 Index: libvirt-acl/tests/nwfilterxml2fwallout/icmp-direction3-test.fwall =================================================================== --- /dev/null +++ libvirt-acl/tests/nwfilterxml2fwallout/icmp-direction3-test.fwall @@ -0,0 +1,23 @@ +#iptables -L FI-vnet0 -n +Chain FI-vnet0 (1 references) +target prot opt source destination +RETURN icmp -- 0.0.0.0/0 0.0.0.0/0 state NEW,ESTABLISHED +DROP all -- 0.0.0.0/0 0.0.0.0/0 +#iptables -L FO-vnet0 -n +Chain FO-vnet0 (1 references) +target prot opt source destination +ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 state ESTABLISHED +DROP all -- 0.0.0.0/0 0.0.0.0/0 +#iptables -L HI-vnet0 -n +Chain HI-vnet0 (1 references) +target prot opt source destination +ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 +DROP all -- 0.0.0.0/0 0.0.0.0/0 +#iptables -L libvirt-host-in -n | grep vnet0 | tr -s " " +HI-vnet0 all -- 0.0.0.0/0 0.0.0.0/0 [goto] PHYSDEV match --physdev-in vnet0 +#iptables -L libvirt-in -n | grep vnet0 | tr -s " " +FI-vnet0 all -- 0.0.0.0/0 0.0.0.0/0 [goto] PHYSDEV match --physdev-in vnet0 +#iptables -L libvirt-in-post -n | grep vnet0 +ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 PHYSDEV match --physdev-in vnet0 +#iptables -L libvirt-out -n | grep vnet0 | tr -s " " +FO-vnet0 all -- 0.0.0.0/0 0.0.0.0/0 [goto] PHYSDEV match --physdev-out vnet0 Index: libvirt-acl/tests/nwfilterxml2fwallout/conntrack-test.fwall =================================================================== --- /dev/null +++ libvirt-acl/tests/nwfilterxml2fwallout/conntrack-test.fwall @@ -0,0 +1,24 @@ +#iptables -L FI-vnet0 -n +Chain FI-vnet0 (1 references) +target prot opt source destination +DROP icmp -- 0.0.0.0/0 0.0.0.0/0 #conn/32 > 1 +DROP tcp -- 0.0.0.0/0 0.0.0.0/0 #conn/32 > 2 +RETURN all -- 0.0.0.0/0 0.0.0.0/0 state NEW,ESTABLISHED +#iptables -L FO-vnet0 -n +Chain FO-vnet0 (1 references) +target prot opt source destination +ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 state ESTABLISHED +#iptables -L HI-vnet0 -n +Chain HI-vnet0 (1 references) +target prot opt source destination +DROP icmp -- 0.0.0.0/0 0.0.0.0/0 #conn/32 > 1 +DROP tcp -- 0.0.0.0/0 0.0.0.0/0 #conn/32 > 2 +ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 +#iptables -L libvirt-host-in -n | grep vnet0 | tr -s " " +HI-vnet0 all -- 0.0.0.0/0 0.0.0.0/0 [goto] PHYSDEV match --physdev-in vnet0 +#iptables -L libvirt-in -n | grep vnet0 | tr -s " " +FI-vnet0 all -- 0.0.0.0/0 0.0.0.0/0 [goto] PHYSDEV match --physdev-in vnet0 +#iptables -L libvirt-in-post -n | grep vnet0 +ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 PHYSDEV match --physdev-in vnet0 +#iptables -L libvirt-out -n | grep vnet0 | tr -s " " +FO-vnet0 all -- 0.0.0.0/0 0.0.0.0/0 [goto] PHYSDEV match --physdev-out vnet0 Index: libvirt-acl/tests/nwfilterxml2fwallout/rarp-test.fwall =================================================================== --- /dev/null +++ libvirt-acl/tests/nwfilterxml2fwallout/rarp-test.fwall @@ -0,0 +1,9 @@ +#ebtables -t nat -L libvirt-I-vnet0 | sed s/0x8035/RARP/g | grep -v "^Bridge" | grep -v "^$" +-p RARP -s 1:2:3:4:5:6 -d aa:bb:cc:dd:ee:ff --arp-op Request --arp-htype 12 --arp-ptype 0x22 --arp-mac-src 1:2:3:4:5:6 --arp-mac-dst a:b:c:d:e:f -j ACCEPT +-p RARP -s 1:2:3:4:5:6 --arp-op Request --arp-htype 255 --arp-ptype 0xff -j ACCEPT +-p RARP -s 1:2:3:4:5:6 --arp-op 11 --arp-htype 256 --arp-ptype 0x100 -j ACCEPT +-p RARP -s 1:2:3:4:5:6 --arp-op 65535 --arp-htype 65535 --arp-ptype 0xffff -j ACCEPT +-p RARP -s 1:2:3:4:5:6 -j ACCEPT +#ebtables -t nat -L PREROUTING | grep vnet0 +-i vnet0 -j libvirt-I-vnet0 + Index: libvirt-acl/tests/nwfilterxml2fwallout/hex-data-test.fwall =================================================================== --- /dev/null +++ libvirt-acl/tests/nwfilterxml2fwallout/hex-data-test.fwall @@ -0,0 +1,68 @@ +#ebtables -t nat -L PREROUTING | grep vnet0 | grep -v "^Bridge" | grep -v "^$" +-i vnet0 -j libvirt-I-vnet0 +#ebtables -t nat -L POSTROUTING | grep vnet0 | grep -v "^Bridge" | grep -v "^$" +-o vnet0 -j libvirt-O-vnet0 +#ebtables -t nat -L libvirt-I-vnet0 | grep -v "^Bridge" | grep -v "^$" +-p IPv4 -s 1:2:3:4:5:6 -d aa:bb:cc:dd:ee:ff --ip-src 10.1.2.3 --ip-dst 10.1.2.3 --ip-tos 0x32 --ip-proto udp --ip-sport 291:564 --ip-dport 13398:17767 -j ACCEPT +-p IPv6 -s 1:2:3:4:5:6/ff:ff:ff:ff:ff:fe -d aa:bb:cc:dd:ee:80/ff:ff:ff:ff:ff:80 --ip6-src ::/ffff:fc00:: --ip6-dst ::10.1.0.0/ffff:ffff:ffff:ffff:ffff:ffff:ffff:8000 --ip6-proto tcp --ip6-sport 273:400 --ip6-dport 13107:65535 -j ACCEPT +-p ARP -s 1:2:3:4:5:6 -d aa:bb:cc:dd:ee:ff --arp-op Request --arp-htype 18 --arp-ptype 0x56 --arp-mac-src 1:2:3:4:5:6 --arp-mac-dst a:b:c:d:e:f -j ACCEPT +#ebtables -t nat -L libvirt-O-vnet0 | grep -v "^Bridge" | grep -v "^$" +-p 0x1234 -j ACCEPT +#iptables -L FI-vnet0 -n +Chain FI-vnet0 (1 references) +target prot opt source destination +RETURN udp -- 0.0.0.0/0 10.1.2.3 MAC 01:02:03:04:05:06 DSCP match 0x22udp spts:291:400 dpts:564:1092 state NEW,ESTABLISHED +#iptables -L FO-vnet0 -n +Chain FO-vnet0 (1 references) +target prot opt source destination +ACCEPT udp -- 10.1.2.3 0.0.0.0/0 DSCP match 0x22udp spts:564:1092 dpts:291:400 state ESTABLISHED +#iptables -L HI-vnet0 -n +Chain HI-vnet0 (1 references) +target prot opt source destination +ACCEPT udp -- 0.0.0.0/0 10.1.2.3 MAC 01:02:03:04:05:06 DSCP match 0x22udp spts:291:400 dpts:564:1092 +#iptables -L libvirt-host-in -n | grep HI-vnet0 | tr -s " " +HI-vnet0 all -- 0.0.0.0/0 0.0.0.0/0 [goto] PHYSDEV match --physdev-in vnet0 +#iptables -L libvirt-in -n | grep FI-vnet0 | tr -s " " +FI-vnet0 all -- 0.0.0.0/0 0.0.0.0/0 [goto] PHYSDEV match --physdev-in vnet0 +#iptables -L libvirt-in-post -n | grep vnet0 +ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 PHYSDEV match --physdev-in vnet0 +#iptables -L libvirt-out -n | grep vnet0 | tr -s " " +FO-vnet0 all -- 0.0.0.0/0 0.0.0.0/0 [goto] PHYSDEV match --physdev-out vnet0 +#ip6tables -L FI-vnet0 -n +Chain FI-vnet0 (1 references) +target prot opt source destination +RETURN tcp ::/0 a:b:c::/128 tcp spts:256:4369 dpts:32:33 +#ip6tables -L FO-vnet0 -n +Chain FO-vnet0 (1 references) +target prot opt source destination +ACCEPT tcp a:b:c::/128 ::/0 MAC 01:02:03:04:05:06 tcp spts:32:33 dpts:256:4369 +#ip6tables -L HI-vnet0 -n +Chain HI-vnet0 (1 references) +target prot opt source destination +ACCEPT tcp ::/0 a:b:c::/128 tcp spts:256:4369 dpts:32:33 +#ip6tables -L libvirt-host-in -n | grep vnet0 | tr -s " " +HI-vnet0 all ::/0 ::/0 [goto] PHYSDEV match --physdev-in vnet0 +#ip6tables -L libvirt-in -n | grep vnet0 | tr -s " " +FI-vnet0 all ::/0 ::/0 [goto] PHYSDEV match --physdev-in vnet0 +#ip6tables -L libvirt-in-post -n | grep vnet0 +ACCEPT all ::/0 ::/0 PHYSDEV match --physdev-in vnet0 +#ip6tables -L libvirt-out -n | grep vnet0 | tr -s " " +FO-vnet0 all ::/0 ::/0 [goto] PHYSDEV match --physdev-out vnet0 +#iptables -L libvirt-host-in -n | grep vnet0 | tr -s " " +HI-vnet0 all -- 0.0.0.0/0 0.0.0.0/0 [goto] PHYSDEV match --physdev-in vnet0 +#iptables -L libvirt-in -n | grep vnet0 | tr -s " " +FI-vnet0 all -- 0.0.0.0/0 0.0.0.0/0 [goto] PHYSDEV match --physdev-in vnet0 +#iptables -L libvirt-in-post -n | grep vnet0 +ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 PHYSDEV match --physdev-in vnet0 +#iptables -L libvirt-out -n | grep vnet0 | tr -s " " +FO-vnet0 all -- 0.0.0.0/0 0.0.0.0/0 [goto] PHYSDEV match --physdev-out vnet0 +#ip6tables -L INPUT -n --line-numbers | grep libvirt +1 libvirt-host-in all ::/0 ::/0 +#ip6tables -L libvirt-host-in -n | grep vnet0 | tr -s " " +HI-vnet0 all ::/0 ::/0 [goto] PHYSDEV match --physdev-in vnet0 +#ip6tables -L libvirt-in -n | grep vnet0 | tr -s " " +FI-vnet0 all ::/0 ::/0 [goto] PHYSDEV match --physdev-in vnet0 +#ip6tables -L libvirt-in-post -n | grep vnet0 +ACCEPT all ::/0 ::/0 PHYSDEV match --physdev-in vnet0 +#ip6tables -L libvirt-out -n | grep vnet0 | tr -s " " +FO-vnet0 all ::/0 ::/0 [goto] PHYSDEV match --physdev-out vnet0 Index: libvirt-acl/tests/nwfilter2vmtest.sh =================================================================== --- /dev/null +++ libvirt-acl/tests/nwfilter2vmtest.sh @@ -0,0 +1,459 @@ +#!/bin/bash + +ORIG_IFNAME="vnet0" +TESTFILTERNAME="nwfiltertestfilter" + +LIBVIRTD=`type -P ${PWD}/../daemon/libvirtd` +VIRSH=`type -P ${PWD}/../tools/virsh` +LD_LIBRARY_PATH="${PWD}../src/.libs/" + +# Maybe no libvirtd was built +[ -z ${LIBVIRTD} ] && exit 0; + +FLAG_WAIT="$((1<<0))" +FLAG_ATTACH="$((1<<1))" +FLAG_VERBOSE="$((1<<2))" +FLAG_LIBVIRT_TEST="$((1<<3))" + +failctr=0 +passctr=0 +attachfailctr=0 +attachctr=0 + +function usage() { + local cmd="$0" +cat <<EOF +Usage: ${cmd} [--help|-h|-?] [--noattach] [--wait] [--verbose] + [--libvirt-test] + +Options: + --help,-h,-? : Display this help screen. + --noattach : Skip tests that attach and detach a network interface + --wait : Wait for the user to press the enter key once an error + was detected + --verbose : Verbose output + --libvirt-test : Use the libvirt test output format + +This test will create two virtual machines. The one virtual machine +will use a filter called '${TESTFILTERNAME}', and reference the filter +'clean-traffic' which should be available by default with every install. +The other virtual machine will reference the filter 'testcase' and will +have its filter permanently updated. +EOF +} + + +# A wrapper for mktemp in case it does not exist +# Echos the name of a temporary file. +function mktmpfile() { + local tmp + type -P mktemp > /dev/null + if [ $? -eq 0 ]; then + tmp=$(mktemp -t nwfvmtest.XXXXXX) + echo ${tmp} + else + while :; do + tmp="/tmp/nwfvmtest.${RANDOM}" + if [ ! -f ${tmp} ]; then + touch ${tmp} + chmod 666 ${tmp} + echo ${tmp} + break + fi + done + fi + return 0 +} + + +function checkExpectedOutput() { + local xmlfile="$1" + local fwallfile="$2" + local ifname="$3" + local flags="$4" + local skipregex="$5" + local regex="s/${ORIG_IFNAME}/${ifname}/g" + local cmd line tmpfile tmpfile2 skip + + tmpfile=`mktmpfile` + tmpfile2=`mktmpfile` + + exec 4<${fwallfile} + + read <&4 + line="${REPLY}" + + while [ "x${line}x" != "xx" ]; do + cmd=`echo ${line##\#} | sed ${regex}` + + skip=0 + if [ "x${skipregex}x" != "xx" ]; then + skip=`echo ${cmd} | grep -c -E ${skipregex}` + fi + + eval ${cmd} 2>&1 | tee ${tmpfile} 1>/dev/null + + rm ${tmpfile2} 2>/dev/null + touch ${tmpfile2} + + while [ 1 ]; do + read <&4 + line="${REPLY}" + + if [ "${line:0:1}" == "#" ] || [ "x${line}x" == "xx" ]; then + + if [ ${skip} -ne 0 ]; then + break + fi + + diff ${tmpfile} ${tmpfile2} >/dev/null + + if [ $? -ne 0 ]; then + echo "FAIL ${xmlfile} : ${cmd}" + diff ${tmpfile} ${tmpfile2} + ((failctr++)) + if [ $((flags & FLAG_WAIT)) -ne 0 ]; then + echo "tmp files: $tmpfile, $tmpfile2" + echo "Press enter" + read + fi + [ $((flags & FLAG_LIBVIRT_TEST)) -ne 0 ] && \ + test_result $((passctr+failctr)) "" 1 + else + ((passctr++)) + [ $((flags & FLAG_VERBOSE)) -ne 0 ] && \ + echo "PASS ${xmlfile} : ${cmd}" + [ $((flags & FLAG_LIBVIRT_TEST)) -ne 0 ] && \ + test_result $((passctr+failctr)) "" 0 + fi + + break; + + fi + echo "${line}" | sed ${regex} >> ${tmpfile2} + done + done + + exec 4>&- + + rm -rf "${tmpfile}" "${tmpfile2}" 2>/dev/null +} + + +function doTest() { + local xmlfile="$1" + local fwallfile="$2" + local vm1name="$3" + local vm2name="$4" + local flags="$5" + local linenums ctr=0 + local tmpfile b msg rc + + if [ ! -r "${xmlfile}" ]; then + echo "FAIL : Cannot access filter XML file ${xmlfile}." + return 1 + fi + + ${VIRSH} nwfilter-define "${xmlfile}" > /dev/null + + checkExpectedOutput "${xmlfile}" "${fwallfile}" "${vm1name}" "${flags}" \ + "" + + checkExpectedOutput "${TESTFILTERNAME}" "nwfilterxml2fwallout/testvm.fwall.dat" \ + "${vm2name}" "${flags}" "" + + if [ $((flags & FLAG_ATTACH)) -ne 0 ]; then + + tmpfile=`mktmpfile` + + b=`{ ${VIRSH} dumpxml ${vm1name} | tr -d "\n"; echo; } | \ + sed "s/.*\<interface.*source bridge='\([a-zA-Z0-9_]\+\)'.*<\/interface>.*/\1/"` + + cat >>${tmpfile} <<EOF +<interface type='bridge'> + <source bridge='${b}'/> + <mac address='52:54:00:11:22:33'/> + <target dev='attach0'/> + <filterref filter='testcase'/> +</interface> +EOF + msg=`${VIRSH} attach-device "${vm1name}" "${tmpfile}" > /dev/null` + rc=$? + + ((attachctr++)) + + if [ $rc -eq 0 ]; then + checkExpectedOutput "${xmlfile}" "${fwallfile}" "${vm1name}" \ + "${flags}" "(PRE|POST)ROUTING" + msg=`${VIRSH} detach-device "${vm1name}" "${tmpfile}"` + if [ $? -ne 0 ]; then + echo "FAIL: Detach of interface failed." + fi + else + ((attachfailctr++)) + if [ $((flags & FLAG_VERBOSE)) -ne 0 ]; then + echo "FAIL: Could not attach interface to vm ${vm1name}." + if [ $((flags & FLAG_WAIT)) -ne 0 ]; then + echo "Press enter" + read + fi + fi + fi + + rm -rf ${tmpfile} + fi + + return 0 +} + + +function runTests() { + local vm1name="$1" + local vm2name="$2" + local xmldir="$3" + local fwalldir="$4" + local flags="$5" + local fwallfiles f + + pushd ${PWD} > /dev/null + cd ${fwalldir} + fwallfiles=`ls *.fwall` + popd > /dev/null + + for fil in ${fwallfiles}; do + f=${fil%%.fwall} + doTest "${xmldir}/${f}.xml" "${fwalldir}/${fil}" "${vm1name}" \ + "${vm2name}" "${flags}" + done + + if [ $((flags & FLAG_LIBVIRT_TEST)) -ne 0 ]; then + test_final $((passctr+failctr)) $failctr + else + echo "" + echo "Summary: ${failctr} failures, ${passctr} passes," + if [ ${attachctr} -ne 0 ]; then + echo " ${attachfailctr} interface attachment failures with ${attachctr} attempts" + fi + fi +} + + +function createVM() { + local vmname="$1" + local filtername="$2" + local ipaddr="$3" + local macaddr="$4" + local flags="$5" + local res + local tmpfile='mktmpfile' + + cat > ${tmpfile} << EOF + <domain type='kvm'> + <name>${vmname}</name> + <memory>131072</memory> + <currentMemory>131072</currentMemory> + <vcpu>1</vcpu> + <os> + <type arch='x86_64' machine='fedora-13'>hvm</type> + <boot dev='hd'/> + </os> + <features> + <acpi/> + <apic/> + </features> + <clock offset='utc'/> + <on_poweroff>destroy</on_poweroff> + <on_reboot>restart</on_reboot> + <on_crash>destroy</on_crash> + <devices> + <emulator>/usr/bin/qemu-kvm</emulator> + <interface type='bridge'> + <mac address='${macaddr}'/> + <source bridge='virbr0'/> + <filterref filter='${filtername}'> + <parameter name='IP' value='${ipaddr}'/> + </filterref> + <target dev='${vmname}'/> + </interface> + <console type='pty'> + </console> + <input type='mouse' bus='ps2'/> + <graphics type='vnc' port='-1' autoport='yes'/> + </devices> + </domain> +EOF + + res=$(${VIRSH} define ${tmpfile}) + if [ $? -ne 0 ]; then + echo "Could not define VM ${vmname} : ${res}" + return 1 + fi + + res=$(${VIRSH} start ${vmname}) + if [ $? -ne 0 ]; then + echo "Could not start VM ${vmname} : ${res}" + `${VIRSH} undefine ${vmname}` + return 1 + fi + + [ $((flags & FLAG_VERBOSE)) -ne 0 ] && echo "Created VM ${vmname}." + + rm -rf ${tmpfile} + + return 0 +} + + +function destroyVM() { + local vmname="$1" + local flags="$2" + local res + + res=$(${VIRSH} destroy ${vmname}) + if [ $? -ne 0 ]; then + echo "Could not destroy VM ${vmname} : ${res}" + return 1 + fi + + res=$(${VIRSH} undefine ${vmname}) + if [ $? -ne 0 ]; then + echo "Could not undefine VM ${vmname} : ${res}" + return 1 + fi + + [ $((flags & FLAG_VERBOSE)) -ne 0 ] && echo "Destroyed VM ${vmname}." + + return 0 +} + + +function createTestFilter() { + local tmpfile=`mktmpfile` + local res + + cat >${tmpfile} << EOF +<filter name="${TESTFILTERNAME}"> + <filterref filter='clean-traffic'/> + + <rule action='drop' direction='inout' priority='1000'> + <all/> + </rule> + + <rule action='drop' direction='inout' priority='1000'> + <all-ipv6/> + </rule> +</filter> +EOF + res=$(${VIRSH} nwfilter-define ${tmpfile}) + if [ $? -ne 0 ]; then + echo "Could not define filter : ${res}" + rm -rf ${tmpfile} + return 1 + fi + + rm -rf ${tmpfile} + + return 0 +} + + +function deleteTestFilter() { + local res + res=$(${VIRSH} nwfilter-undefine ${TESTFILTERNAME}) + if [ $? -ne 0 ]; then + echo "Could not undefine filter : ${res}" + return 1 + fi + return 0 +} + + +function main() { + local prgname="$0" + local vm1 vm2 + local xmldir="nwfilterxml2xmlin" + local fwalldir="nwfilterxml2fwallout" + local found=0 vms res + local filtername="testcase" + local startedlibvirtd=0 + local flags OPWD + + ((flags=${FLAG_ATTACH})) + + while [ $# -ne 0 ]; do + case "$1" in + --help|-h|-\?) usage ${prgname}; exit 0;; + --noattach) ((flags ^= FLAG_ATTACH ));; + --wait) ((flags |= FLAG_WAIT ));; + --verbose) ((flags |= FLAG_VERBOSE ));; + --libvirt-test) ((flags |= FLAG_LIBVIRT_TEST ));; + *) usage ${prgname}; exit 1;; + esac + shift 1 + done + + if [ `uname` != "Linux" ]; then + echo "This script will only run on Linux." + exit 1; + fi + + if [ $((flags & FLAG_LIBVIRT_TEST)) -ne 0 ]; then + pushd ${PWD} > /dev/null + . test-lib.sh + test_intro $this_test + popd > /dev/null + fi + + res=$(${VIRSH} capabilities 2>/dev/null 1>/dev/null) + + if [ $? -ne 0 ]; then + if [ "x${LIBVIRTD}x" == "xx" ]; then + echo "Cannot find libvirtd. Exiting." + exit 1 + fi + + ${LIBVIRTD} 2>/dev/null 1>/dev/null & + sleep 2 + + startedlibvirtd=1 + res=$(${VIRSH} capabilities 2>/dev/null 1>/dev/null) + if [ $? -ne 0 ]; then + echo "Could not start the libvirt daemon : $res" + echo "Exiting." + exit 1 + fi + fi + + vm1="testvm${RANDOM}" + vm2="testvm${RANDOM}" + + createTestFilter + if [ $? -ne 0 ]; then + exit 1; + fi + + createVM "${vm1}" "testcase" "10.2.2.2" "52:54:0:0:0:1" "${flags}" + if [ $? -ne 0 ]; then + echo "Could not create VM ${vm1}. Exiting." + exit 1 + fi + + createVM "${vm2}" "${TESTFILTERNAME}" "10.1.1.1" "52:54:0:9f:33:da" \ + "${flags}" + if [ $? -ne 0 ]; then + echo "Could not create VM ${vm2}. Exiting." + destroyVM "${vm1}" "${flags}" + exit 1 + fi + + runTests "${vm1}" "${vm2}" "${xmldir}" "${fwalldir}" "${flags}" + + destroyVM "${vm1}" "${flags}" + destroyVM "${vm2}" "${flags}" + deleteTestFilter + + [ ${startedlibvirtd} -eq 1 ] && killall lt-libvirtd + return 0 +} + +main "$@" Index: libvirt-acl/tests/nwfilterxml2fwallout/testvm.fwall.dat =================================================================== --- /dev/null +++ libvirt-acl/tests/nwfilterxml2fwallout/testvm.fwall.dat @@ -0,0 +1,73 @@ +#ebtables -t nat -L PREROUTING | grep vnet0 | grep -v "^Bridge" | grep -v "^$" +-i vnet0 -j libvirt-I-vnet0 +#ebtables -t nat -L POSTROUTING | grep vnet0 | grep -v "^Bridge" | grep -v "^$" +-o vnet0 -j libvirt-O-vnet0 +#ebtables -t nat -L libvirt-I-vnet0 | grep -v "^Bridge" | grep -v "^$" +-p IPv4 -j I-vnet0-ipv4 +-p ARP -j I-vnet0-arp +-p 0x8035 -j I-vnet0-rarp +-p 0x835 -j ACCEPT +-j DROP +#ebtables -t nat -L libvirt-O-vnet0 | grep -v "^Bridge" | grep -v "^$" +-p IPv4 -j O-vnet0-ipv4 +-p ARP -j O-vnet0-arp +-p 0x8035 -j O-vnet0-rarp +-j DROP +#ebtables -t nat -L I-vnet0-ipv4 | grep -v "^Bridge" | grep -v "^$" +-s ! 52:54:0:9f:33:da -j DROP +-p IPv4 --ip-src ! 10.1.1.1 -j DROP +#ebtables -t nat -L O-vnet0-ipv4 | grep -v "^Bridge" | grep -v "^$" +-j ACCEPT +#ebtables -t nat -L I-vnet0-arp | grep -v "^Bridge" | grep -v "^$" +-s ! 52:54:0:9f:33:da -j DROP +-p ARP --arp-mac-src ! 52:54:0:9f:33:da -j DROP +-p ARP --arp-ip-src ! 10.1.1.1 -j DROP +-p ARP --arp-op Request -j ACCEPT +-p ARP --arp-op Reply -j ACCEPT +-j DROP +#ebtables -t nat -L O-vnet0-arp | grep -v "^Bridge" | grep -v "^$" +-p ARP --arp-op Reply --arp-mac-dst ! 52:54:0:9f:33:da -j DROP +-p ARP --arp-ip-dst ! 10.1.1.1 -j DROP +-p ARP --arp-op Request -j ACCEPT +-p ARP --arp-op Reply -j ACCEPT +-j DROP +#ip6tables -L FI-vnet0 -n +Chain FI-vnet0 (1 references) +target prot opt source destination +DROP all ::/0 ::/0 +#ip6tables -L FO-vnet0 -n +Chain FO-vnet0 (1 references) +target prot opt source destination +DROP all ::/0 ::/0 +#ip6tables -L HI-vnet0 -n +Chain HI-vnet0 (1 references) +target prot opt source destination +DROP all ::/0 ::/0 +#ip6tables -L libvirt-host-in -n | grep vnet0 | tr -s " " +HI-vnet0 all ::/0 ::/0 [goto] PHYSDEV match --physdev-in vnet0 +#ip6tables -L libvirt-in -n | grep vnet0 | tr -s " " +FI-vnet0 all ::/0 ::/0 [goto] PHYSDEV match --physdev-in vnet0 +#ip6tables -L libvirt-in-post -n | grep vnet0 +ACCEPT all ::/0 ::/0 PHYSDEV match --physdev-in vnet0 +#ip6tables -L libvirt-out -n | grep vnet0 | tr -s " " +FO-vnet0 all ::/0 ::/0 [goto] PHYSDEV match --physdev-out vnet0 +#iptables -L FI-vnet0 -n +Chain FI-vnet0 (1 references) +target prot opt source destination +DROP all -- 0.0.0.0/0 0.0.0.0/0 +#iptables -L FO-vnet0 -n +Chain FO-vnet0 (1 references) +target prot opt source destination +DROP all -- 0.0.0.0/0 0.0.0.0/0 +#iptables -L HI-vnet0 -n +Chain HI-vnet0 (1 references) +target prot opt source destination +DROP all -- 0.0.0.0/0 0.0.0.0/0 +#iptables -L libvirt-host-in -n | grep vnet0 | tr -s " " +HI-vnet0 all -- 0.0.0.0/0 0.0.0.0/0 [goto] PHYSDEV match --physdev-in vnet0 +#iptables -L libvirt-in -n | grep vnet0 | tr -s " " +FI-vnet0 all -- 0.0.0.0/0 0.0.0.0/0 [goto] PHYSDEV match --physdev-in vnet0 +#iptables -L libvirt-in-post -n | grep vnet0 +ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 PHYSDEV match --physdev-in vnet0 +#iptables -L libvirt-out -n | grep vnet0 | tr -s " " +FO-vnet0 all -- 0.0.0.0/0 0.0.0.0/0 [goto] PHYSDEV match --physdev-out vnet0
On 05/07/2010 03:39 PM, Stefan Berger wrote:
This is a repost of a previously posted patch.
Attached is a test for automatic testing of of the nwfilter rules as the are instantiated in form of ebtables, iptables and ip6tables rules on running VMs.
The test automatically starts libvirtd from the build directory unless it finds libvirtd running. My hope is that one won't notice this. It uses virsh from the build directory to create two dummy VMs with random name suffixes. The VMs don't boot any OS but just stop in the BIOS. This is enough to run the nwfilter tests. Afterwards the nwfilter of the one VM are continuously modified and the instantiation is checked. The instantiation of rules of the 2nd VM are also continously checked to verify that the modifications on the 1st VM has had no effect on the instantiated rules of the 2nd VM.
I'm still a bit wary of this patch. Is this something that can be done with 'virsh -c test:///default' can do? Or can we at least copy how daemon-conf runs an instance of libvirtd pointing to an independent pid and config file, whether or not the system libvirtd is running? Or should we be trying to do this as part of libvirt-tck instead? -- Eric Blake eblake@redhat.com +1-801-349-2682 Libvirt virtualization library http://libvirt.org
Eric Blake wrote:
On 05/07/2010 03:39 PM, Stefan Berger wrote:
This is a repost of a previously posted patch.
Attached is a test for automatic testing of of the nwfilter rules as the are instantiated in form of ebtables, iptables and ip6tables rules on running VMs.
The test automatically starts libvirtd from the build directory unless it finds libvirtd running.
This is an implied race. All it takes is a parallel "make check" and two libvirtd-starting tests started at approximately the same time. But that's minor.
My hope is that one won't notice this. It uses virsh from the build directory to create two dummy VMs with random name suffixes. The VMs don't boot any OS but just stop in the BIOS. This is enough to run the nwfilter tests. Afterwards the nwfilter of the one VM are continuously modified and the instantiation is checked. The instantiation of rules of the 2nd VM are also continously checked to verify that the modifications on the 1st VM has had no effect on the instantiated rules of the 2nd VM.
I'm still a bit wary of this patch. Is this something that can be done with 'virsh -c test:///default' can do? Or can we at least copy how daemon-conf runs an instance of libvirtd pointing to an independent pid and config file, whether or not the system libvirtd is running?
Or should we be trying to do this as part of libvirt-tck instead?
I really like the idea of being able to test functionality like this via a quick "make check", and using code in the same repository. However, a test that's skipped whenever it detects a running libvirtd is less valuable than one that runs unconditionally, so libvirt-tck is probably the ideal destination. It is critically important to have an easily accessible "make check"- like process that can be used to exercise more of libvirt. I hope libvirt-tck will soon fit the bill.
On Tue, May 11, 2010 at 10:02:01PM +0200, Jim Meyering wrote:
Eric Blake wrote:
On 05/07/2010 03:39 PM, Stefan Berger wrote:
This is a repost of a previously posted patch.
Attached is a test for automatic testing of of the nwfilter rules as the are instantiated in form of ebtables, iptables and ip6tables rules on running VMs.
The test automatically starts libvirtd from the build directory unless it finds libvirtd running.
This is an implied race. All it takes is a parallel "make check" and two libvirtd-starting tests started at approximately the same time. But that's minor.
My hope is that one won't notice this. It uses virsh from the build directory to create two dummy VMs with random name suffixes. The VMs don't boot any OS but just stop in the BIOS. This is enough to run the nwfilter tests. Afterwards the nwfilter of the one VM are continuously modified and the instantiation is checked. The instantiation of rules of the 2nd VM are also continously checked to verify that the modifications on the 1st VM has had no effect on the instantiated rules of the 2nd VM.
I'm still a bit wary of this patch. Is this something that can be done with 'virsh -c test:///default' can do? Or can we at least copy how daemon-conf runs an instance of libvirtd pointing to an independent pid and config file, whether or not the system libvirtd is running?
Or should we be trying to do this as part of libvirt-tck instead?
I really like the idea of being able to test functionality like this via a quick "make check", and using code in the same repository.
I really do not think we should be running tests that alter a machines iptables rules as part of 'make check'. This kind of host level change is simply not something that people expect & the consequences of a bug here are just too bad.
However, a test that's skipped whenever it detects a running libvirtd is less valuable than one that runs unconditionally, so libvirt-tck is probably the ideal destination.
It is critically important to have an easily accessible "make check"- like process that can be used to exercise more of libvirt. I hope libvirt-tck will soon fit the bill.
It already fits that bill & is catching & preventing significant bugs in QEMU. It has been invaluable in porting libvirt to the new QEMU JSON interface for command & control - it wouldn't have been practical without it in fact. Regards, Daniel -- |: Red Hat, Engineering, London -o- http://people.redhat.com/berrange/ :| |: http://libvirt.org -o- http://virt-manager.org -o- http://deltacloud.org :| |: http://autobuild.org -o- http://search.cpan.org/~danberr/ :| |: GnuPG: 7D3B9505 -o- F3C9 553F A1DA 4AC2 5648 23C1 B3DF F742 7D3B 9505 :|
Daniel P. Berrange wrote:
On Tue, May 11, 2010 at 10:02:01PM +0200, Jim Meyering wrote: ...
However, a test that's skipped whenever it detects a running libvirtd is less valuable than one that runs unconditionally, so libvirt-tck is probably the ideal destination.
It is critically important to have an easily accessible "make check"- like process that can be used to exercise more of libvirt. I hope libvirt-tck will soon fit the bill.
It already fits that bill & is catching & preventing significant bugs in QEMU. It has been invaluable in porting libvirt to the new QEMU JSON interface for command & control - it wouldn't have been practical without it in fact.
Didn't mean to impugn libvirt-tck. On the contrary, it looks great. It's just that we need a way to be able to run -- quickly and conveniently -- "make check"-style tests, including integration tests.
On Wed, May 12, 2010 at 01:16:33PM +0200, Jim Meyering wrote:
Daniel P. Berrange wrote:
On Tue, May 11, 2010 at 10:02:01PM +0200, Jim Meyering wrote: ...
However, a test that's skipped whenever it detects a running libvirtd is less valuable than one that runs unconditionally, so libvirt-tck is probably the ideal destination.
It is critically important to have an easily accessible "make check"- like process that can be used to exercise more of libvirt. I hope libvirt-tck will soon fit the bill.
It already fits that bill & is catching & preventing significant bugs in QEMU. It has been invaluable in porting libvirt to the new QEMU JSON interface for command & control - it wouldn't have been practical without it in fact.
Didn't mean to impugn libvirt-tck. On the contrary, it looks great. It's just that we need a way to be able to run -- quickly and conveniently -- "make check"-style tests, including integration tests.
Personally I think it is sufficient to just let people invoke the tck command line tool directly, eg libvirt-tck -c /path/to/config It is not more complex to invoke that, than invoke a 'make check' command. If we really need a make command though, it could be done with something like TCK_CONFIG=$(top_srcdir)/tck.cfg tck: $(top_builddir)/daemon/libvirtd --pidfile foo.pid --config blah.cfg libvirt-tck -c $(TCK_CONFIG) kill `cat foo.pid` though this is making assumptions that we need the daemon running for the tests which is only true for certain URIs. Also, people probably do their builds as non-root, but its useful to run the tests as root (at least for qemu:///system or lxc://, but not needed for qemu:///session). Regards, Daniel -- |: Red Hat, Engineering, London -o- http://people.redhat.com/berrange/ :| |: http://libvirt.org -o- http://virt-manager.org -o- http://deltacloud.org :| |: http://autobuild.org -o- http://search.cpan.org/~danberr/ :| |: GnuPG: 7D3B9505 -o- F3C9 553F A1DA 4AC2 5648 23C1 B3DF F742 7D3B 9505 :|
Eric Blake <eblake@redhat.com> wrote on 05/11/2010 03:31:10 PM:
On 05/07/2010 03:39 PM, Stefan Berger wrote:
This is a repost of a previously posted patch.
Attached is a test for automatic testing of of the nwfilter rules as
the
are instantiated in form of ebtables, iptables and ip6tables rules on running VMs.
The test automatically starts libvirtd from the build directory unless it finds libvirtd running. My hope is that one won't notice this. It uses virsh from the build directory to create two dummy VMs with random name suffixes. The VMs don't boot any OS but just stop in the BIOS. This is enough to run the nwfilter tests. Afterwards the nwfilter of the one VM are continuously modified and the instantiation is checked. The instantiation of rules of the 2nd VM are also continously checked to verify that the modifications on the 1st VM has had no effect on the instantiated rules of the 2nd VM.
I'm still a bit wary of this patch. Is this something that can be done with 'virsh -c test:///default' can do? Or can we at least copy how
test doesn't support the functionality, so no, it cannot be used like that.
daemon-conf runs an instance of libvirtd pointing to an independent pid and config file, whether or not the system libvirtd is running?
yes, I am looking into this.
Or should we be trying to do this as part of libvirt-tck instead?
I know. Hurdle being Perl for me and I so far have had lots of problems getting that test suite to run; some problems were related just to compile the dependent libvirt perl project, others then with a perl dependency and my FC13 installation etc. Stefan
-- Eric Blake eblake@redhat.com +1-801-349-2682 Libvirt virtualization library http://libvirt.org
[attachment "signature.asc" deleted by Stefan Berger/Watson/IBM]
On Tue, May 11, 2010 at 05:28:37PM -0400, Stefan Berger wrote:
Eric Blake <eblake@redhat.com> wrote on 05/11/2010 03:31:10 PM:
On 05/07/2010 03:39 PM, Stefan Berger wrote:
This is a repost of a previously posted patch.
Attached is a test for automatic testing of of the nwfilter rules as
the
are instantiated in form of ebtables, iptables and ip6tables rules on running VMs.
The test automatically starts libvirtd from the build directory unless it finds libvirtd running. My hope is that one won't notice this. It uses virsh from the build directory to create two dummy VMs with random name suffixes. The VMs don't boot any OS but just stop in the BIOS. This is enough to run the nwfilter tests. Afterwards the nwfilter of the one VM are continuously modified and the instantiation is checked. The instantiation of rules of the 2nd VM are also continously checked to verify that the modifications on the 1st VM has had no effect on the instantiated rules of the 2nd VM.
I'm still a bit wary of this patch. Is this something that can be done with 'virsh -c test:///default' can do? Or can we at least copy how
test doesn't support the functionality, so no, it cannot be used like that.
daemon-conf runs an instance of libvirtd pointing to an independent pid and config file, whether or not the system libvirtd is running?
yes, I am looking into this.
Or should we be trying to do this as part of libvirt-tck instead?
I know. Hurdle being Perl for me and I so far have had lots of problems getting that test suite to run; some problems were related just to compile the dependent libvirt perl project, others then with a perl dependency and my FC13 installation etc.
FYI Fedora 13 has all the neccessary Perl modules required to run the TCK, so you shouldn't need to compile/install any others manually. Although I'd like all the test scripts to be written in Perl for consistency, if neccessary, it is actually possible to write the test scripts in pretty much any programming language. The only core requirement is compliance with the TAP protocol[1] for displaying success/fail status. This is an incredibly simple syntax that can be easily output from any language[2], including shell[2]. Essentially when the test starts, print out how many tests are expect to run. Then for each test, print 'ok' or 'not ok' on a new line. eg a compete test output might look like this: 1..4 ok 1 - Input file opened not ok 2 - First line of the input valid ok 3 - Read the rest of the file not ok 4 - Summarized correctly # TODO Not written yet Your current shell script could easily be made to print out this kind of syntax if you don't feel you can rewrite it in Perl easily. Regards, Daniel [1] Friendly format docs: http://search.cpan.org/~petdance/TAP-1.00/TAP.pm IETF standard: http://testanything.org/wiki/index.php/TAP_at_IETF:_Draft_Standard [2] Language support: http://testanything.org/wiki/index.php/TAP_Producers [3] Shell helper functions: http://testanything.org/wiki/index.php/Tap-functions -- |: Red Hat, Engineering, London -o- http://people.redhat.com/berrange/ :| |: http://libvirt.org -o- http://virt-manager.org -o- http://deltacloud.org :| |: http://autobuild.org -o- http://search.cpan.org/~danberr/ :| |: GnuPG: 7D3B9505 -o- F3C9 553F A1DA 4AC2 5648 23C1 B3DF F742 7D3B 9505 :|
participants (4)
-
Daniel P. Berrange -
Eric Blake -
Jim Meyering -
Stefan Berger