It's out ! As planned I tagged it in git and made available signed tarball and rpms at the usual place: ftp://libvirt.org/libvirt/ I also pushed a libvirt-python-2.0.0 release that can be found at: ftp://libvirt.org/libvirt/python/ Independantly of the major bump in numbering scheme (see the document at http://libvirt.org/downloads.html#numbering for new mechanism) this is a major release in terms of the number of commits included, more than 500. This includes user visible changes and APIs, a very large amount of bug fixes and massive set of improvements: Features: - Many improvements in Xen support (Jim Fehlig, Philipp Hahn, Chunyan Liu) - Many improvements in OpenVZ support (Nikolay Shirokovskiy, mfeoktistov(a)virtuozzo.com) - Guest agent vCPU APIs (Peter Krempa) - storage lifecycle event APIs (Jovanka Gulicoska) - CPU type detection (Jiri Denemark) Documentation: - Document to not rely on virConnectGetMaxVcpus API (Shivaprasad G Bhat) - add help document relevant to default mapping of credentials to machines (yuelongguang) - docs: Fix whitespace in output (John Ferlan) - util: fix a typo (Chen Hanxiao) - docs: virsh: Added note for the dump command (Jaroslav Suchanek) - docs: Add at least some docs and fix schema entry for perf events (Peter Krempa) - virsh: Fix help string for net-dumpxml (sannyshao) - doc: Fix explanation of S3 and S4 states (Jingjing Shao) - docs: Clarify chardev protocol (John Ferlan) - docs: Document our event loop (Michal Privoznik) Portability: - libvirt.spec.in: Use libnl-devel for RHEL-6 (Jean-Marc Liger) - qemuDomainDeviceDefValidate: Drop unused qemuCaps (Jiri Denemark) - vz: Fix indentation in prlsdkGetNetAddresses() (Andrea Bolognani) - Revert "util: new function virNetDevIPInfoAddToDev" (Ján Tomko) - Revert "conf: allow setting peer address in <ip> element of <interface>" (Ján Tomko) - Revert "conf: support host-side IP/route information in <interface>" (Ján Tomko) - Revert "util: support setting peer for virNetDevIPInfo addresses" (Ján Tomko) - Revert "lxc: support setting host-side IP addresses/routes" (Ján Tomko) - Revert "qemu: support setting host-side IP addresses/routes" (Ján Tomko) - Clean up after virNetDevIP creation (Andrea Bolognani) - util: netdevip: Include vircommand.h (Andrea Bolognani) - qemu: support setting host-side IP addresses/routes (Laine Stump) - lxc: support setting host-side IP addresses/routes (Laine Stump) - util: support setting peer for virNetDevIPInfo addresses (Laine Stump) - conf: support host-side IP/route information in <interface> (Laine Stump) - conf: allow setting peer address in <ip> element of <interface> (Vasiliy Tolstov) - util: new function virNetDevIPInfoAddToDev (Laine Stump) - lxc: move debug/error log when adding IP addresses to virNetDevIPAddrAdd (Laine Stump) - conf: clean up after adding calls to virNetDevIPInfo helpers (Laine Stump) - qemu: forbid setting guest-side IP address/route info of <interface> (Laine Stump) - conf: use virNetDevIPInfo for guest-side <interface> config (Laine Stump) - conf: use virNetDevIPInfo in virDomainHostdevCaps (Laine Stump) - conf: single object containing list of IP addresses, list of routes (Laine Stump) - util: move IP route & address object-related functions to virnetdevip.c (Laine Stump) - util: new files virnetdevip.[ch] for IP-related netdev functions (Laine Stump) - conf/openvz: eliminate incorrect/undocumented use of <source dev='blah'/> (Laine Stump) - qemu: eliminate memory leaks when converting NetDefs to type='ethernet' (Laine Stump) - qemu: don't set/clear NetDef IP addresses in qemuConnectDomainXMLToNative() (Laine Stump) - conf: new function virDomainNetDefClear (Laine Stump) - virHostCPUGetInfo: Fix build on non-Unix like systems (Michal Privoznik) - Fix build without xen (Martin Kletzander) - bhyve: add missing virhost(cpu|mem).h headers (Roman Bogorodskiy) - hostcpu: fix build on FreeBSD (Roman Bogorodskiy) - nodeinfo: fix build on non-Linux (Roman Bogorodskiy) - domain_conf: silence gcc warnings (Pavel Hrdina) - vz: fixed build by including necessary headers (Maxim Nestratov) - nodeinfo: remove FreeBSD specific code for getting memory (Daniel P. Berrange) - util: Alter virCryptoEncryptData for non GNUTLS builds (John Ferlan) Bug Fixes: - conf: Don't free the constructed string in virDomainGetBlkioParametersAssignFromDef (Peter Krempa) - conf: def: Avoid unnecessary allocation of 'perf' events definition (Peter Krempa) - docs: Warn against locked memory limit too high (Jiri Denemark) - qemu: SCSI hostdev hot-plug: Fix automatic creation of SCSI controllers (Marc Hartmayer) - qemu: hot-plug: Fix broken SCSI disk hot-plug (Marc Hartmayer) - qemu: Let empty default VNC password work as documented (Jiri Denemark) - admin: fix virt-admin startup crash by calling virAdmInitialize (Erik Skultety) - Fix possible invalid read in adminClientGetInfo (Ján Tomko) - virStorageTranslateDiskSourcePool: Avoid double free (Michal Privoznik) - logging: fixing log level initialization from cmdline (Jaroslav Suchanek) - vz: fix build for virNetDev* changes (Olga Krishtal) - libvirtd.conf: Fix invalid default of max_anonymous_clients (Michal Privoznik) - lxc: eliminate extraneous free of netDef->ifname_guest (Laine Stump) - vz: fix memory leaks in attach/detach functions (Nikolay Shirokovskiy) - Fix error detection in virStorageBackendISCSIGetHostNumber (Ján Tomko) - virStorageBackendISCSIGetHostNumber: correctly use virDirOpen (Ján Tomko) - storage: Fix coverity warning (Cole Robinson) - Don't allow raneming domains to empty strings (Martin Kletzander) - Revert "virnetsocket: Provide socket address format in a more standard form" (Ján Tomko) - Allow configs to start with a dot (Ján Tomko) - Do not skip hidden entries when looking for a stable path (Ján Tomko) - Do not ignore hidden files in /sys and /proc (Ján Tomko) - tests: genericxml2xml: Fix test file name (Peter Krempa) - qemu: command: Error on accel2d (Cole Robinson) - qemu: command: Error on accel3d with non-virtio (Cole Robinson) - Allow virDomain(SG)etGuestVcpus on read-write connection only (Peter Krempa) - libxl: use serial device for console when targetType is serial (Jim Fehlig) - conf: Remove redundant free in virCPUDefFree (Jiri Denemark) - qemu: Fix reference leak in qemuDomainDefPostParse (Jiri Denemark) - tests: Adjust tests for encrypted storage (John Ferlan) - conf: limit chassisNr, and busNr to a minimum value of 1, not 0 (Laine Stump) - virsh migrate: Fix positional parameters (Jiri Denemark) - util: Make failure to get supplementary group list for a uid non-fatal (Peter Krempa) - tools: virt-login-shell: Fix group list bounds checking (Peter Krempa) - conf: Fix memory leak in graphics XML parser (Peter Krempa) - qemu: restore non-pci hostdev labels after detach (Ján Tomko) - configure: define preprocessor macros for SCSI and MPATH (Ján Tomko) - spec: Make driver-qemu require driver-storage (Martin Kletzander) - conf: Remove pre-calculation of initial memory size (Peter Krempa) - conf: Fix perf event parser (Peter Krempa) - qemu: perf: Don't set state of first event for every other event (Peter Krempa) - xenconfig: fix conversion of <driver> to backendtype (Jim Fehlig) - util: fix missing broadcast address in bridge and tap device IP addresses (Laine Stump) - qemu: Shorten domain name for watchdog coredump (Martin Kletzander) - util: Fix broken syntax-check (John Ferlan) - docs: document rng backend path restrictions of older libvirt (Ján Tomko) - docs: Fix syntax-check (John Ferlan) - Fix renumbering once again (Martin Kletzander) - qemu: Allow ACPI shutdown only for running domains (Martin Kletzander) - virt-host-validate: fix build with clang (Roman Bogorodskiy) - tests: fix CPUID detection tests compilation failure (Wei Liu) - apparmor: Don't scrub environment of virtlogd process (Guido Günther) - bhyve: fix bhyvexml2arg test (Roman Bogorodskiy) - vz: fix crash when parsing unexpected disk configuration (Maxim Nestratov) - vz: return correct result for unimplemented ChangeState actions (Maxim Nestratov) - qemuMonitorJSONAttachCharDev: Teach spicevmc (Michal Privoznik) - qemu: Yet another check for blkdeviotune values (Martin Kletzander) - qemu: Generate channel target paths on hotplug as well (Martin Kletzander) - virsh-domain: fix memory leak in cmdDomDisplay (Pavel Hrdina) - virsh-network: Avoid possible NULL deref in cmdNetworkDHCPLeases (Michal Privoznik) - virsh: domdisplay: if listen is 0.0.0.0 or [::] print address from URI (Pavel Hrdina) - qemu_process: don't print empty line if qemu exits without any error (Pavel Hrdina) - virschematest: Link with libxml2 (Michal Privoznik) - virschematest: Access the right directory containing XMLs (Michal Privoznik) - qemu: process: Call disk startup policy check after cloning domain def (Peter Krempa) - qemu: driver: Unset log file watcher after restoring a VM save file (Peter Krempa) - test: Remove executable permission from Xen xm files (Philipp Hahn) - qemu: process: Append the "shutting down" message using the new APIs (Peter Krempa) - Do not VIR_STRDUP the string in udevGetDeviceProperty (Ján Tomko) - systemd: directly notify systemd instead of using sd_notify (Daniel P. Berrange) Improvements: - dist: Speed up distribution compression (Martin Kletzander) - tests: Add test cases for SCSI disk hot-plug with QEMU (Marc Hartmayer) - qemu: Use proper async job to refresh virtio channels (Jiri Denemark) - lxc: use correct prefix when setting veth IP address (Laine Stump) - util: allow calling virSocketAddrGetIPPrefix with NULL netmask or address (Laine Stump) - tests: mock virNetDevSetIPAddress (Laine Stump) - conf: clean up virDomainNetIPParseXML() (Laine Stump) - global: consistently use IP rather than Ip in identifiers (Laine Stump) - util: move virInterface(State|Link)/virNetDevFeature from conf to util (Laine Stump) - util: move virNetDevLinkDump to virnetlink.c (Laine Stump) - spec: distribute admin API within libvirt-client package (Erik Skultety) - examples: admin: Add some examples for the new admin APIs (Erik Skultety) - admin: enable both admin API functionality and tarball distribution (Erik Skultety) - vz: always pass graphics address to sdk (Nikolay Shirokovskiy) - vz: support vnc password (Nikolay Shirokovskiy) - vz: remove exlicitly setting zeros in dumping graphics (Nikolay Shirokovskiy) - vz: support attach/detach/update/ of graphics device (Nikolay Shirokovskiy) - vz: move getting container video devices out from vnc code (Nikolay Shirokovskiy) - vz: trustGuestRxFilters fixes (Nikolay Shirokovskiy) - vz: fix minor type safey issues with net union usage (Nikolay Shirokovskiy) - vz: fix updating to no gateways (Nikolay Shirokovskiy) - vz: dump route info in domain xml (Nikolay Shirokovskiy) - vz: dump ip addresses to domain xml (Nikolay Shirokovskiy) - vz: give nice report if network device not found (Nikolay Shirokovskiy) - vz: move disks checks to device post parse (Nikolay Shirokovskiy) - vz: leverage disks parameters check on disks updates too (Nikolay Shirokovskiy) - vz: add device updates (Nikolay Shirokovskiy) - vz: reuse edit config frame in for attach/detach functions (Nikolay Shirokovskiy) - vz: make prlsdkGetDisk more generic (Nikolay Shirokovskiy) - vz: remove disk cache mode hunk (Nikolay Shirokovskiy) - cpu_map.xml: add cmt/mbm feature to x86 (Qiaowei Ren) - cpu: Consolidate ARM drivers (Jiri Denemark) - util: fix build in virNetDevTapGetRealDeviceName (Roman Bogorodskiy) - storage: Introduce virStoragePoolObjBuildTempFilePath (John Ferlan) - Promote storage pool refresh lifecycle event to top level event (Daniel P. Berrange) - util: Add 'luks' to the FileTypeInfo (John Ferlan) - util: Modify the FileTypeInfo to add a version size (John Ferlan) - util: Introduce virReadBufInt16LE and virReadBufInt16BE (John Ferlan) - qemu: Remove authdef from secret setup (John Ferlan) - qemu: Change protocol parameter for secret setup (John Ferlan) - qemu: check the kvm host cpu max limits in virConnectGetDomainCapabilities (Shivaprasad G Bhat) - qemu: Make qemuBuildSecretInfoProps global (John Ferlan) - qemu: Remove type from qemuBuildSecretInfoProps (John Ferlan) - Rename kvmGetMaxVCPUs() to virHostCPUGetKVMMaxVCPUs() (Shivaprasad G Bhat) - conf: Allow disks with identical WWN or serial (Peter Krempa) - build: increase xz compression level (Ján Tomko) - openvz: do not open-code STRSKIP (Ján Tomko) - Replace some uses STREQLEN with STRPREFIX (Ján Tomko) - qemu: Check for VFIO too where legacy passthrough is checked (Shivaprasad G Bhat) - Prohibit opendir in syntax-check (Ján Tomko) - Use virDirOpenQuiet (Ján Tomko) - Introduce virDirOpenQuiet (Ján Tomko) - Use virDirOpenIfExists (Ján Tomko) - Add virDirOpenIfExists (Ján Tomko) - Use virDirOpen (Ján Tomko) - Introduce virDirOpen (Ján Tomko) - openvz: split single-line if (Ján Tomko) - qemu: Use stricter checks in virQEMUCapsFillDomainDeviceDiskCaps() (Andrea Bolognani) - qemu: Introduce qemuDomainMachineIsPSeries() (Andrea Bolognani) - qemu: Add architecture checks to qemuDomainMachineIsVirt() (Andrea Bolognani) - qemu: Remove redundant arguments to qemuBuildSerialChrDeviceStr() (Andrea Bolognani) - Add support for VirtualBox 5 (Martin Pietsch) - Rename virNetClient*AddrString (Ján Tomko) - Rename virNetServerClient*AddrString (Ján Tomko) - Add SASL to virNetSocket{Local,Remote}AddrString (Ján Tomko) - virNetSocket: rename AddrStr to AddrStrSASL (Ján Tomko) - virnetsockettest: fix error messages (Ján Tomko) - Introduce virNetServerClientRemoteAddrStringURI (Ján Tomko) - Introduce virNetSocketRemoteAddrStringURI (Ján Tomko) - Do not skip files starting with a dot in leases directory (Ján Tomko) - Fix comment in virStorageBackendFileSystemRefresh (Ján Tomko) - Do not check for '.' and '..' after virDirRead (Ján Tomko) - Skip '.' and '..' in virDirRead (Ján Tomko) - Introduce VIR_DIR_CLOSE (Ján Tomko) - Do not check the return value of closedir (Ján Tomko) - Do not save errno in virUSBDeviceSearch (Ján Tomko) - tests: utils: Fail XML file comparison if input file doesn't exist (Peter Krempa) - qemu: Add new secret info type (John Ferlan) - util: Introduce virSecretLookupFormatSecret (John Ferlan) - util: Move and rename virStorageAuthDefParseSecret (John Ferlan) - secret: Move virStorageSecretType and rename (John Ferlan) - storage: Remove redundant refreshPool check (Cole Robinson) - qemu: make monitor command API available during async jobs (Nikolay Shirokovskiy) - prohibit-duplicate-header: print file name and line (Ján Tomko) - syntax-check: rewrite prohibit-duplicate-header in perl (Ján Tomko) - Do not ignore perl scripts in build-aux (Ján Tomko) - Add newDomain parameter to qemuDomainAssignAddresses (Ján Tomko) - Add a USB hub to controller order test (Ján Tomko) - conf: Remove dead console compat formatting (Cole Robinson) - Use for instead of code duplication when parsing USB port (Ján Tomko) - Split out USB port parsing (Ján Tomko) - Add a test for long USB port paths (Ján Tomko) - Report auto convergence throttle rate in migration stats (Jiri Denemark) - qemu: Implement auto convergence migration parameters (Jiri Denemark) - qemu: Add support for cpu throttling parameters (Jiri Denemark) - qemu: Introduce qemuMigrationSetParams (Jiri Denemark) - Add auto convergence migration parameters (Jiri Denemark) - test: Rework qemuMonitorJSONGetMigrationParams test (Jiri Denemark) - qemu: Rework qemuMonitorJSONSetMigrationParams (Jiri Denemark) - qemu: Rework qemuMonitorJSONGetMigrationParams (Jiri Denemark) - qemu: Rename qemuMonitorMigrationCompression (Jiri Denemark) - qemu: Decouple migration parameters from compression settings (Jiri Denemark) - qemu: Make qemuMonitorSetMigrationCompression saner (Jiri Denemark) - conf: Simplify conditions in CPU parser/formatter (Jiri Denemark) - qemucapsprobe: Don't put empty line at EOF (Jiri Denemark) - qemu: Hide virQEMUCapsNewForBinary (Jiri Denemark) - qemu: Implement virDomainSetGuestVcpus (Peter Krempa) - qemu: Implement virDomainGetGuestVcpus (Peter Krempa) - qemu: agent: Make setting of vcpus more robust (Peter Krempa) - virsh: Add command 'guestvcpus' implementing virDomain(GS)etGuestVcpus (Peter Krempa) - lib: Add API to set individual vcpu usage in the guest via guest agent (Peter Krempa) - lib: Add API to query guest vcpu info using guest agent (Peter Krempa) - rpcgen: Add support for generating funcs returning alloc'd typed params (Peter Krempa) - storage: Use virSecretGetSecretString (John Ferlan) - storage: Create helper to set options for CreateQemuImg code (John Ferlan) - storage: Create helper to set backing for CreateQemuImg code (John Ferlan) - storage: Adjust qemu-img switches check (John Ferlan) - Do not call postParse with ABI_UPDATE when parsing cmdline (Ján Tomko) - Fix USB port in input-usbmouse test (Ján Tomko) - test-wrap-argv: add --check parameter (Ján Tomko) - test-wrap-argv: add --in-place parameter (Ján Tomko) - test-wrap-argv: hold a copy of the original file in an array (Ján Tomko) - test-wrap-argv: return a string in rewrap_line (Ján Tomko) - test-wrap-argv: use map and join instead of a for cycle (Ján Tomko) - test-wrap-argv: return a string in rewrap_arg (Ján Tomko) - test-wrap-argv: split out rewrap_arg (Ján Tomko) - test-wrap-argv: split out rewrap_line (Ján Tomko) - vsh: remove namespace poisoning (Ján Tomko) - vbox: remove duplicate macros (Ján Tomko) - Remove unused SOL_NETLINK macro (Ján Tomko) - qemu: Fix typo pci-extender-bus -> pci-expander-bus (Andrea Bolognani) - Mark virsh-optparse as expensive (Ján Tomko) - Drop virrandomtest (Ján Tomko) - Remove virsh-synopsis (Ján Tomko) - Introduce virsh self-test (Ján Tomko) - tests: mock gnutls_dh_params_generate2 (Ján Tomko) - Remove virsh-all (Ján Tomko) - util: Add option not to report errors in virGetUserEnt (Peter Krempa) - tools: virt-login-shell: Fix cut'n'paste mistake in error message (Peter Krempa) - conf: Fix label name in virDomainGraphicsListensParseXML (Peter Krempa) - Allow disjunct ranges in VIR_TEST_RANGE (Ján Tomko) - Introduce virBitmapParseUnlimited (Ján Tomko) - Remove separator argument from virBitmapParse (Ján Tomko) - Introduce virBitmapParseSeparator (Ján Tomko) - Do not return number of set bits in virBitmapParse (Ján Tomko) - qemu: Don't use legacy USB for aarch64 mach-virt guests (Andrea Bolognani) - qemu_hotplug: Use a helper variable consistently (Tomasz Flendrich) - virsh: Introduce pool-event command (Jovanka Gulicoska) - libxl: add USB to hostdev domcapabilities (Jim Fehlig) - Remove stray space in cmdHelp (Ján Tomko) - qemu: Permit PCI-free aarch64 mach-virt guests (Andrea Bolognani) - qemuDomainDetachDeviceConfig: Allow cold unplug of redirdevs (Michal Privoznik) - qemuDomainAttachDeviceConfig: Allow redirdev coldplug (Michal Privoznik) - virDomainDeviceInfoIterateInternal: Iterate through redirdevs too (Michal Privoznik) - virDomainRedirdevDef: Introduce find & remove routines (Michal Privoznik) - domain_conf: Validate redirdev after parsing (Michal Privoznik) - configure: remove definition of HAVE_GLIBC_RPCGEN (Ján Tomko) - configure: error out when asked for mpath on non-Linux (Ján Tomko) - qemu: Fix alignment in virDomainDefAddController() call (Andrea Bolognani) - tests: schema: Remove useless perf schema data (Peter Krempa) - docs: virsh: Add minimal documentation for 'mbmt' and 'mbml' perf events (Peter Krempa) - cpu_x86: Use signature in CPU detection code (Jiri Denemark) - cpu: Add Skylake-Client x86 CPU model (Jiri Denemark) - conf: Rename virDomainDefGetMemoryActual to virDomainDefGetMemoryTotal (Peter Krempa) - qemu: don't add pci-bridge to Q35/arm domains unless it's needed (Laine Stump) - qemu: don't be as insistent about adding dmi-to-pci-bridge or pci-bridge (Laine Stump) - util: remove redundant comments (Chen Hanxiao) - event-test: support storage lifecycle event APIs (Jovanka Gulicoska) - storage: implement storage lifecycle event APIs (Jovanka Gulicoska) - remote: implement storage lifecycle event APIs (Jovanka Gulicoska) - test: implement storage lifecycle event APIs (Jovanka Gulicoska) - conf: add storage_event handling (Jovanka Gulicoska) - Introduce storage lifecycle event APIs (Jovanka Gulicoska) - qemu: Remove useless block in processWatchdogEvent (Martin Kletzander) - qemu: Follow coding style convention (Martin Kletzander) - qemu: Unify automatic coredump filenames (Martin Kletzander) - qemu: Add cfg pointer to various command line helpers (John Ferlan) - qemu: Make qemuBuildShmemBackendStr private (John Ferlan) - qemu: migration: use consistent error message (Cole Robinson) - qemu: More usage of qemuDomainDiskBlockJobIsActive (Cole Robinson) - add default mapping of credentials to machine (yuelongguang) - syntax-check: drop prohibit_undesirable_word_seq (Ján Tomko) - maint: Switch to xz compressed PAX release archives (Andrea Bolognani) - vz: get rid of unused home state variable in private domain obj (Nikolay Shirokovskiy) - check-spacing: fix error message (Ján Tomko) - check-spacing: use non-capturing groups (Ján Tomko) - check-spacing: remove virAssertCmpInt exception (Ján Tomko) - check-spacing: simplify keyword spacing check (Ján Tomko) - check-spacing: rewrite regex for checking the closing parenthesis (Ján Tomko) - check-spacing: rewrite whitespace check before (semi)colon (Ján Tomko) - Rename bracket-spacing.pl to check-spacing.pl (Ján Tomko) - Rename virAssertCmpInt to testAssertEq (Ján Tomko) - maint: remove whitespace from closing parentheses (Ján Tomko) - vbox: reformat multi-line error reports (Ján Tomko) - cfg.mk: use a single regex for all non-reentrant functions (Ján Tomko) - xlconfigtest: add test for USB config conversion (Chunyan Liu) - Add conversion of domxml USB config to/from xl.cfg (Chunyan Liu) - libxl: support hotplug USB host device (Chunyan Liu) - libxl: support creating guest with USB hostdev (Chunyan Liu) - qemu: Refactor qemuDomainAttachChrDevice error paths (John Ferlan) - caps: Add capability for tls-x509-creds (John Ferlan) - Change 1.3.6 occurrences to 2.0.0 to follow version bump (Martin Kletzander) - qemu: Obtain job before checking if domain is live (Martin Kletzander) - Bump release to 2.0.0 and document release schedule & versioning (Daniel P. Berrange) - cputest: Get rid of the array of test functions (Jiri Denemark) - qemu: Add support for zero-detection writes (Martin Kletzander) - conf: Add support of zero-detection for disks (Martin Kletzander) - libxl: Add support for ovmf firmware (Jim Fehlig) - xenconfig: support bios=ovmf xl.cfg (Jim Fehlig) - libxl: implement connectGetDomainCapabilities (Jim Fehlig) - libxl: introduce libxl_capabilities.{ch} (Jim Fehlig) - libxl: add default firmwares to driver config object (Jim Fehlig) - driver config: Introduce virFirmware object (Jim Fehlig) - libxl: fix vm lock overwritten bug (Wang Yufei) - virt-host-validate: improve tests for arm/aarch64 (Riku Voipio) - virt-login-shell: mark as Linux only (Roman Bogorodskiy) - vz: implementation of domainSetUserPassword callback (Mikhail Feoktistov) - vz: remove unused macro logPrlEventError (Maxim Nestratov) - vz: keep subscription to performance events thru domain lifetime (Nikolay Shirokovskiy) - vz: use consistent naming for different domain object in vz_driver.c (Nikolay Shirokovskiy) - Export virDomainRedirdevDefFree (Michal Privoznik) - virt-login-shell: add ability to join the container cgroups (Daniel P. Berrange) - virt-login-shell: add ability to auto-detect shell from container (Daniel P. Berrange) - virt-login-shell: fully reset container environment (Daniel P. Berrange) - virt-login-shell: avoid loosing error during cleanup (Daniel P. Berrange) - virt-login-shell: allow shell to be a simple string argument (Daniel P. Berrange) - virt-login-shell: change way we request a login shell (Daniel P. Berrange) - virt-login-shell: honour the -c option to launch commands (Daniel P. Berrange) - virsh: make lxc-enter-namespace also join the cgroups (Daniel P. Berrange) - libvirt-lxc: add virDomainLxcEnterCGroup API (Daniel P. Berrange) - util: add function for looking up the user shell (Daniel P. Berrange) - nodeinfo: move host memory APIs out into virhostmem file (Daniel P. Berrange) - nodeinfo: move host CPU APIs out into virhostcpu.c file (Daniel P. Berrange) - nodeinfo: rename all CPU APIs to have a virHostCPU prefix (Daniel P. Berrange) - nodeinfo: rename all memory APIs to have a virHostMem prefix (Daniel P. Berrange) - nodeinfo: split CPU info retrieval out of nodeGetInfo (Daniel P. Berrange) - nodeinfo: make nodeGetInfo() call nodeGetMemory for memory size (Daniel P. Berrange) - nodeinfo: remove sysfs_prefix from all methods (Daniel P. Berrange) - vnc: add support for listen type none (Pavel Hrdina) - spice: introduce listen type none (Pavel Hrdina) - spice: introduce spice_auto_unix_socket config option (Pavel Hrdina) - spice: add support for listen type socket (Pavel Hrdina) - qemu_capabilites: add QEMU_CAPS_SPICE_UNIX (Pavel Hrdina) - vnc: add support for listen type 'socket' (Pavel Hrdina) - graphics: introduce new listen type 'socket' (Pavel Hrdina) - vnc: move generation of socket path to qemuProcessGraphicsSetupListen (Pavel Hrdina) - vnc: rename socketAutogenerated to socketFromConfig (Pavel Hrdina) - qemu_command: move websocket code into else part for address listen (Pavel Hrdina) - qemuhotplugtest: Test live data (Martin Kletzander) - qemu: Move channel path generation out of command creation (Martin Kletzander) - cputest: Rename nehalem-force to penryn-force (Jiri Denemark) - cpu: Add ARAT x86 CPU feature (Jiri Denemark) - cpu: Add x86 feature flags for CPUID leaf 0xd, sub leaf 1 (Jiri Denemark) - cpu: Sort CPU map features on eax_in (Jiri Denemark) - cpu: Shorten eax_in values in CPU map (Jiri Denemark) - cpu_x86: Add full support for ecx_in CPUID parameter (Jiri Denemark) - cpu_x86: Prepare for ecx_in CPUID parameter (Jiri Denemark) - qemumonitorjsontest: Add getcpu test data (Jiri Denemark) - tests: Add CPU detection test for Intel Xeon X5460 (Jiri Denemark) - tests: Add CPU detection test for Intel Xeon W3520 (Jiri Denemark) - tests: Add CPU detection test for Intel Xeon E7-4820 (Jiri Denemark) - tests: Add CPU detection test for Intel Xeon E5-2650 (Jiri Denemark) - tests: Add CPU detection test for Intel Xeon E5-2630 (Jiri Denemark) - tests: Add CPU detection test for Intel Xeon E3-1245 (Jiri Denemark) - tests: Add CPU detection test for Intel Xeon 5110 (Jiri Denemark) - tests: Add CPU detection test for AMD Phenom II X4 B95 (Jiri Denemark) - tests: Add CPU detection test for Intel Pentium P6100 (Jiri Denemark) - tests: Add CPU detection test for AMD Opteron 6282 SE (Jiri Denemark) - tests: Add CPU detection test for AMD Opteron 6234 (Jiri Denemark) - tests: Add CPU detection test for AMD Opteron 2350 (Jiri Denemark) - tests: Add CPU detection test for AMD Opteron 1352 (Jiri Denemark) - tests: Add CPU detection test for AMD FX 8150 (Jiri Denemark) - tests: Add CPU detection test for Intel Core2 Quad Q9500 (Jiri Denemark) - tests: Add CPU detection test for Intel Core2 Duo E6850 (Jiri Denemark) - tests: Add CPU detection test for Intel Core i7-5600U (Jiri Denemark) - tests: Add CPU detection test for Intel Core i7-4600U (Jiri Denemark) - tests: Add CPU detection test for Intel Core i7-3770 (Jiri Denemark) - tests: Add CPU detection test for Intel Core i7-3740QM (Jiri Denemark) - tests: Add CPU detection test for Intel Core i7-3520M (Jiri Denemark) - tests: Add CPU detection test for Intel Core i7-2600 (Jiri Denemark) - tests: Add CPU detection test for Intel Core i5-6600 (Jiri Denemark) - tests: Add CPU detection test for Intel Core i5-4670T (Jiri Denemark) - tests: Add CPU detection test for Intel Core i5-2540M (Jiri Denemark) - tests: Add CPU detection test for Intel Core i5-2500 (Jiri Denemark) - tests: Add CPU detection test for Intel Atom N450 (Jiri Denemark) - tests: Add CPU detection test for Intel Atom D510 (Jiri Denemark) - tests: Add CPU detection test for AMD A10-5800K (Jiri Denemark) - tests: Add CPU detection tests (Jiri Denemark) - cpu_x86: Refactor internal KVM features (Jiri Denemark) - cpu_ppc64: Avoid unnecessary pointer to virCPUppc64Data (Jiri Denemark) - cpu_x86: Avoid unnecessary pointers to virCPUx86Data (Jiri Denemark) - tests: Create simple monitor in qemuMonitorTestNewFromFile (Jiri Denemark) - tests: Fix "Reponse" typo (Jiri Denemark) - tests: Introduce qemuMonitorTestNewFromFile (Jiri Denemark) - qemu: Refactor qemuMonitorJSONGetCPUx86Data (Jiri Denemark) - cpu_x86: Rename CPUID function to eax_in (Jiri Denemark) - cpu: Detect arch when parsing CPU data (Jiri Denemark) - cpu_x86: Fix CPU data parser (Jiri Denemark) - cpu_x86: Propagate vendor to guest's virCPUData (Jiri Denemark) - Fix typo in virNetDevGetEthtoolGFeatures stub (Ján Tomko) - tests: Rename virtTestMain to virTestMain. (Tomáš Ryšavý) - tests: Rename virtTestErrorFuncQuiet to virTestErrorFuncQuiet. (Tomáš Ryšavý) - tests: Rename virtTestCounterNext to virTestCounterNext. (Tomáš Ryšavý) - tests: Rename virtTestCaptureProgramOutput to virTestCaptureProgramOutput. (Tomáš Ryšavý) - tests: Rename virtTestDifferenceBin to virTestDifferenceBin. (Tomáš Ryšavý) - tests: Rename virtTestCaptureProgramExecChild to virTestCaptureProgramExecChild. (Tomáš Ryšavý) - tests: Rename virtTestDifferenceFullInternal to virTestDifferenceFullInternal. (Tomáš Ryšavý) - tests: Rename virtTestDifferenceFullNoRegenerate. (Tomáš Ryšavý) - tests: Rename virtTestQuiesceLibvirtErrors to virTestQuiesceLibvirtErrors. (Tomáš Ryšavý) - tests: Rename virtTestUseTerminalColors to virTestUseTerminalColors. (Tomáš Ryšavý) - tests: Rename virtTestLogContentAndReset to virTestLogContentAndReset. (Tomáš Ryšavý) - tests: Rename virtTestCounterReset to virTestCounterReset. (Tomáš Ryšavý) - tests: Rename virtTest00MActive to virTest00MActive. (Tomáš Ryšavý) - tests: Rename virtTestClearCommandPath to virTestClearCommandPath. (Tomáš Ryšavý) - Rename virtTestDifferenceFull to virTestDifferenceFull. (Tomáš Ryšavý) - tests: Rename virtTestCompareToFile to virTestCompareToFile. (Tomáš Ryšavý) - Rename virtTestLoadFile to virTestLoadFile. (Tomáš Ryšavý) - Rename virtTestDifference to virTestDifference. (Tomáš Ryšavý) - tests: Rename virtTestRun to virTestRun. (Tomáš Ryšavý) - virschematest: call va_end even on OOM (Ján Tomko) - node_device: Replace VIR_ERROR with standard vir*Error in state driver init (Jovanka Gulicoska) - lxc: simplify lxcDomainGetBlkioParameters (Ján Tomko) - Export virDomainGetBlkioParametersAssignFromDef (Ján Tomko) - Use virDomainObjGetDefs in lxcDomainGetBlkioParameters (Ján Tomko) - Use virDomainObjGetDefs in lxcDomainSetBlkioParameters (Ján Tomko) - Use virDomainObjGetDefs in lxcDomainGetMemoryParameters (Ján Tomko) - Use virDomainObjGetDefs in lxcDomainGetSchedulerParametersFlags (Ján Tomko) - Use virDomainObjGetDefs in lxcDomainSetSchedulerParametersFlags (Ján Tomko) - Use virDomainObjGetDefs in lxcDomainSetMemoryFlags (Ján Tomko) - lxc: rename vmdef to persistentDef (Ján Tomko) - Use @SYSTEM priority for TLS on Fedora >= 21 (Daniel P. Berrange) - remote: allow TLS priority to be customized (Daniel P. Berrange) - Pass config file object through to driver open methods (Daniel P. Berrange) - remote: allow TLS protocol/cipher priority override in URI (Daniel P. Berrange) - libvirtd: add config option for TLS priority (Daniel P. Berrange) - rpc: allow priority string to be passed to TLS context (Daniel P. Berrange) - configure: allow setting default TLS priority string (Daniel P. Berrange) - rpc: set gnutls log function at global init time (Daniel P. Berrange) - tls: remove support for gnutls 1.x.x, require 2.2.0 (Daniel P. Berrange) - qemu_monitor: rephrase error message if qemu closes monitor (Pavel Hrdina) - Introduce virschematest (Ján Tomko) - Introduce virXMLValidatorValidate (Ján Tomko) - Introduce virXMLValidatorInit (Ján Tomko) - Introduce virXMLValidatorFree (Ján Tomko) - Introduce virXMLValidator structure (Ján Tomko) - qemu: domain: Sanitize return value handling in disk presence checker (Peter Krempa) - xen: test for driver=tap2 sub-type in xen-xm (Philipp Hahn) - xen: Also add sub-type for driver=tap2 in xen-xm (Philipp Hahn) - qemu: Replace VIR_ERROR with standard vir*Error in state driver init (Jovanka Gulicoska) - xen: Replace VIR_ERROR with standard vir*Error in state driver init (Jovanka Gulicoska) - uml: Replace VIR_ERROR with standard vir*Error in state driver init (Jovanka Gulicoska) - qemu: migration: Add VM log entry on start of migration (Peter Krempa) - qemu: domain: Implement helper for one-shot log entries to the VM log file (Peter Krempa) - log: daemon: Add remote protocol handling for the log appending API (Peter Krempa) - log: handler: Add new API to append to logging files (Peter Krempa) - util: Perform proper virRandomBytes return value checking (John Ferlan) - Reindent virNetDevSendEthtoolIoctl (Ján Tomko) - Reuse the socket in virNetDevGetFeatures (Ján Tomko) - Return bool in virNetDevFeatureAvailable (Ján Tomko) - Split out virNetDevGetEthtoolGFeatures (Ján Tomko) - Split out virNetDevGetEthtoolFeatures (Ján Tomko) - Move struct elem out of virNetDevGetFeatures (Ján Tomko) - Reindent comment of virNetDevFeatureAvailable (Ján Tomko) - qemu: process: Allow VIR_QEMU_PROCESS_START_NEW in qemuProcessLaunch (Peter Krempa) - Add nomatch filters when enumerating udev devices (Ján Tomko) - node_device_udev: rename labels to cleanup (Ján Tomko) - node_device_udev: remove unnecessary ret variables (Ján Tomko) - qemu: Move check that validates 'min_guarantee' to qemuDomainDefValidate (Peter Krempa) - conf: Move validation of disk LUN device to the appropriate place (Peter Krempa) - conf: Move disk info validator to the domain conf validator (Peter Krempa) - qemu: process: Call the domain config validator when starting a new VM (Peter Krempa) - qemu: process: Convert multiple boolean args to a single flag (Peter Krempa) - qemu: process: Unexport qemuProcessStartValidate (Peter Krempa) - conf: Add device def validation callback (Peter Krempa) - conf: drop 'def' from struct virDomainDefPostParseDeviceIteratorData (Peter Krempa) - conf: Add infrastructure for adding configuration validation (Peter Krempa) - conf: Rename VIR_DOMAIN_DEF_PARSE_VALIDATE to VIR_DOMAIN_DEF_PARSE_VALIDATE_SCHEMA (Peter Krempa) - node_device_udev: remove yoda condition (Ján Tomko) - udevSetupSystemDev: return if allocation fails (Ján Tomko) - Reformat udevProcessRemoveableMedia (Ján Tomko) - udevProcessStorage: trim all whitespace from model and vendor (Ján Tomko) - node_device_udev: switch to using virReportError (Ján Tomko) - Remove PROPERTY_* constants (Ján Tomko) - Only return two values in udevGetUintSysfsAttr (Ján Tomko) - Only return two values in udevGetIntSysfsAttr (Ján Tomko) - Only return two values in udevGetStringSysfsAttr (Ján Tomko) - Remove extra allocation in udevGetDeviceSysfsAttr (Ján Tomko) - Only return two values in udevGetUintProperty (Ján Tomko) - Only return two values in udevGetStringProperty (Ján Tomko) - qemu: Add support to QXL's max_outputs parameter (Martin Kletzander) - qemu: Check for qxl's max_outputs parameter (Martin Kletzander) - Rewrite disk type checking in udevProcessStorage (Ján Tomko) - Fix the return value in udevKludgeStorageType (Ján Tomko) - udevProcessFloppy; remove unnecessary allocation (Ján Tomko) - Move udevHasDeviceProperty earlier (Ján Tomko) - Remove udevStrToLong_i (Ján Tomko) - Remove udevStrToLong_ui (Ján Tomko) - Remove udevStrToLong_ull (Ján Tomko) - Rewrite usage of StrToLong_ui in udevProcess{PCI,SCSI} (Ján Tomko) - udevProcessSCSIHost: use STRSKIP (Ján Tomko) - udevGetDMIData: remove unused variable (Ján Tomko) - Assign node device driver private data earlier (Ján Tomko) - Do not call nodeStateCleanup on early initialization error (Ján Tomko) - Reformat nodeStateCleanup (Ján Tomko) - node_device_udev: initialize libpciaccess after the driver lock (Ján Tomko) - Split out pciaccess (de)initialization (Ján Tomko) - Initialize ret to -1 in nodeStateInitialize (Ján Tomko) - qemu: Move and rename qemuBuildObjectCommandlineFromJSON (John Ferlan) - storage: Create helper to set input for CreateQemuImg code (John Ferlan) - storage: Split out a helper for encryption checks (John Ferlan) - storage: Split out setting default secret for encryption (John Ferlan) - util: Clean up code formatting in virstorageencryption (John Ferlan) - Do not check for domain liveness in virDomainObjSetDefTransient (Ján Tomko) - Check if the domain is active in virDomainObjGetPersistentDef (Ján Tomko) - Clean up redundant usage of virDomainObjSetDefTransient (Ján Tomko) - Post-release version bump to 1.3.6 (Ján Tomko) Thanks everyone for contributing to this release, with bug reports, patches, reviews, documentation etc ... Enjoy ! Daniel -- Daniel Veillard | Open Source and Standards, Red Hat veillard(a)redhat.com | libxml Gnome XML XSLT toolkit http://xmlsoft.org/ http://veillard.com/ | virtualization library http://libvirt.org/