[libvirt] RFC (v3): Add virDomainBlockPull API family to libvirt
I didn't receive too many comments on the last round. That probably means everybody has been busy with the 0.9.2 release. I think this is ready to be committed but we can wait until the qemu side has gone up (which should happen any day now). Changes since V2: - Rebased - Ensure error messages are consistent between JSON and Text interfaces - Added additional tests to the sample test bucket Changes since V1: - Rebased to incorporate changes to generator and removal of static driver structure initializers - Other small fixups suggested by Matthias Bolte To help speed the provisioning process for large domains, new QED disks are created with backing to a template image. These disks are configured with copy on read such that blocks that are read from the backing file are copied to the new disk. This reduces I/O over a potentially costly path to the backing image. In such a configuration, there is a desire to remove the dependency on the backing image as the domain runs. To accomplish this, qemu will provide an interface to perform sequential copy on read operations during normal VM operation. Once all data has been copied, the disk image's link to the backing file is removed. The virDomainBlockPull API family brings this functionality to libvirt. virDomainBlockPullAll() instructs the hypervisor to stream the entire device in the background. Progress of this operation can be checked with the function virDomainBlockPullInfo(). An ongoing stream can be cancelled with virDomainBlockPullAbort(). If a more controlled IO rate is desired, virDomainBlockPull() can be used to perform a single increment of IO. Subsequent calls to this function will automatically stream the appropriate next increment until the disk has been fully populated. An event (VIR_DOMAIN_EVENT_ID_BLOCK_PULL) will be emitted when a disk has been fully populated or if a BlockPullAll() operation was terminated due to an error. This event is useful to avoid polling on virDomainBlockPullInfo() for completion and could also be used by the security driver to revoke access to the backing file when it is no longer needed. make check: PASS make syntax-check: PASS make -C tests valgrind: PASS I am testing this API with Python Unittest (see the last patch). [PATCH 1/8] Add new API virDomainBlockPull* to headers [PATCH 2/8] virDomainBlockPull: Implement the main entry points [PATCH 3/8] Add virDomainBlockPull support to the remote driver [PATCH 4/8] Implement virDomainBlockPull for the qemu driver [PATCH 5/8] Enable the virDomainBlockPull API in virsh [PATCH 6/8] Enable virDomainBlockPull in the python API. [PATCH 7/8] Asynchronous event for BlockPull completion [PATCH 8/8] test: Python Unittests for DomainBlockPull API
Set up the types for the block pull functions and insert them into the virDriver structure definition. Symbols are exported in this patch to prevent documentation compile failures. * include/libvirt/libvirt.h.in: new API * src/driver.h: add the new entry to the driver structure * python/generator.py: fix compiler errors, the actual python bindings are implemented later * src/libvirt_public.syms: export symbols Signed-off-by: Adam Litke <agl@us.ibm.com> --- include/libvirt/libvirt.h.in | 39 +++++++++++++++++++++++++++++++++++++++ python/generator.py | 3 +++ src/driver.h | 22 ++++++++++++++++++++++ src/libvirt_public.syms | 7 +++++++ 4 files changed, 71 insertions(+), 0 deletions(-) diff --git a/include/libvirt/libvirt.h.in b/include/libvirt/libvirt.h.in index df213f1..ba547c1 100644 --- a/include/libvirt/libvirt.h.in +++ b/include/libvirt/libvirt.h.in @@ -1156,6 +1156,45 @@ int virDomainUpdateDeviceFlags(virDomainPtr domain, const char *xml, unsigned int flags); /* + * BlockPull API + */ + +/* An iterator for initiating and monitoring block pull operations */ +typedef unsigned long long virDomainBlockPullCursor; + +typedef struct _virDomainBlockPullInfo virDomainBlockPullInfo; +struct _virDomainBlockPullInfo { + /* + * The following fields provide an indication of block pull progress. @cur + * indicates the current position and will be between 0 and @end. @end is + * the final cursor position for this operation and represents completion. + * To approximate progress, divide @cur by @end. + */ + virDomainBlockPullCursor cur; + virDomainBlockPullCursor end; +}; +typedef virDomainBlockPullInfo *virDomainBlockPullInfoPtr; + +int virDomainBlockPull(virDomainPtr dom, + const char *path, + virDomainBlockPullInfoPtr info, + unsigned int flags); + +int virDomainBlockPullAll(virDomainPtr dom, + const char *path, + unsigned int flags); + +int virDomainBlockPullAbort(virDomainPtr dom, + const char *path, + unsigned int flags); + +int virDomainGetBlockPullInfo(virDomainPtr dom, + const char *path, + virDomainBlockPullInfoPtr info, + unsigned int flags); + + +/* * NUMA support */ diff --git a/python/generator.py b/python/generator.py index 7c38fdd..43e7414 100755 --- a/python/generator.py +++ b/python/generator.py @@ -178,6 +178,8 @@ def enum(type, name, value): functions_failed = [] functions_skipped = [ "virConnectListDomains", + 'virDomainBlockPull', + 'virDomainGetBlockPullInfo', ] skipped_modules = { @@ -192,6 +194,7 @@ skipped_types = { 'virConnectDomainEventIOErrorCallback': "No function types in python", 'virConnectDomainEventGraphicsCallback': "No function types in python", 'virEventAddHandleFunc': "No function types in python", + 'virDomainBlockPullInfoPtr': "Not implemented yet", } ####################################################################### diff --git a/src/driver.h b/src/driver.h index 5df798a..4b30390 100644 --- a/src/driver.h +++ b/src/driver.h @@ -615,6 +615,24 @@ typedef int unsigned long flags, int cancelled); +typedef int + (*virDrvDomainBlockPull)(virDomainPtr dom, const char *path, + virDomainBlockPullInfoPtr info, + unsigned int flags); + +typedef int + (*virDrvDomainBlockPullAll)(virDomainPtr dom, const char *path, + unsigned int flags); + +typedef int + (*virDrvDomainBlockPullAbort)(virDomainPtr dom, const char *path, + unsigned int flags); + +typedef int + (*virDrvDomainGetBlockPullInfo)(virDomainPtr dom, const char *path, + virDomainBlockPullInfoPtr info, + unsigned int flags); + /** * _virDriver: * @@ -749,6 +767,10 @@ struct _virDriver { virDrvDomainMigratePerform3 domainMigratePerform3; virDrvDomainMigrateFinish3 domainMigrateFinish3; virDrvDomainMigrateConfirm3 domainMigrateConfirm3; + virDrvDomainBlockPull domainBlockPull; + virDrvDomainBlockPullAll domainBlockPullAll; + virDrvDomainBlockPullAbort domainBlockPullAbort; + virDrvDomainGetBlockPullInfo domainGetBlockPullInfo; }; typedef int diff --git a/src/libvirt_public.syms b/src/libvirt_public.syms index 4d4299a..f2637ae 100644 --- a/src/libvirt_public.syms +++ b/src/libvirt_public.syms @@ -451,3 +451,10 @@ LIBVIRT_0.9.2 { } LIBVIRT_0.9.0; # .... define new API here using predicted next version number .... +LIBVIRT_0.9.3 { + global: + virDomainBlockPull; + virDomainBlockPullAll; + virDomainBlockPullAbort; + virDomainGetBlockPullInfo; +} LIBVIRT_0.9.2; -- 1.7.3
On Thu, Jun 09, 2011 at 12:10:07PM -0500, Adam Litke wrote:
Set up the types for the block pull functions and insert them into the virDriver structure definition. Symbols are exported in this patch to prevent documentation compile failures.
* include/libvirt/libvirt.h.in: new API * src/driver.h: add the new entry to the driver structure * python/generator.py: fix compiler errors, the actual python bindings are implemented later * src/libvirt_public.syms: export symbols
Signed-off-by: Adam Litke <agl@us.ibm.com> --- include/libvirt/libvirt.h.in | 39 +++++++++++++++++++++++++++++++++++++++ python/generator.py | 3 +++ src/driver.h | 22 ++++++++++++++++++++++ src/libvirt_public.syms | 7 +++++++ 4 files changed, 71 insertions(+), 0 deletions(-)
diff --git a/include/libvirt/libvirt.h.in b/include/libvirt/libvirt.h.in index df213f1..ba547c1 100644 --- a/include/libvirt/libvirt.h.in +++ b/include/libvirt/libvirt.h.in @@ -1156,6 +1156,45 @@ int virDomainUpdateDeviceFlags(virDomainPtr domain, const char *xml, unsigned int flags);
/* + * BlockPull API + */ + +/* An iterator for initiating and monitoring block pull operations */ +typedef unsigned long long virDomainBlockPullCursor; + +typedef struct _virDomainBlockPullInfo virDomainBlockPullInfo; +struct _virDomainBlockPullInfo { + /* + * The following fields provide an indication of block pull progress. @cur + * indicates the current position and will be between 0 and @end. @end is + * the final cursor position for this operation and represents completion. + * To approximate progress, divide @cur by @end. + */ + virDomainBlockPullCursor cur; + virDomainBlockPullCursor end; +}; +typedef virDomainBlockPullInfo *virDomainBlockPullInfoPtr; + +int virDomainBlockPull(virDomainPtr dom, + const char *path, + virDomainBlockPullInfoPtr info, + unsigned int flags); + +int virDomainBlockPullAll(virDomainPtr dom, + const char *path, + unsigned int flags); + +int virDomainBlockPullAbort(virDomainPtr dom, + const char *path, + unsigned int flags); + +int virDomainGetBlockPullInfo(virDomainPtr dom, + const char *path, + virDomainBlockPullInfoPtr info, + unsigned int flags); + + +/* * NUMA support */
diff --git a/python/generator.py b/python/generator.py index 7c38fdd..43e7414 100755 --- a/python/generator.py +++ b/python/generator.py @@ -178,6 +178,8 @@ def enum(type, name, value): functions_failed = [] functions_skipped = [ "virConnectListDomains", + 'virDomainBlockPull', + 'virDomainGetBlockPullInfo', ]
skipped_modules = { @@ -192,6 +194,7 @@ skipped_types = { 'virConnectDomainEventIOErrorCallback': "No function types in python", 'virConnectDomainEventGraphicsCallback': "No function types in python", 'virEventAddHandleFunc': "No function types in python", + 'virDomainBlockPullInfoPtr': "Not implemented yet", }
####################################################################### diff --git a/src/driver.h b/src/driver.h index 5df798a..4b30390 100644 --- a/src/driver.h +++ b/src/driver.h @@ -615,6 +615,24 @@ typedef int unsigned long flags, int cancelled);
+typedef int + (*virDrvDomainBlockPull)(virDomainPtr dom, const char *path, + virDomainBlockPullInfoPtr info, + unsigned int flags); + +typedef int + (*virDrvDomainBlockPullAll)(virDomainPtr dom, const char *path, + unsigned int flags); + +typedef int + (*virDrvDomainBlockPullAbort)(virDomainPtr dom, const char *path, + unsigned int flags); + +typedef int + (*virDrvDomainGetBlockPullInfo)(virDomainPtr dom, const char *path, + virDomainBlockPullInfoPtr info, + unsigned int flags); + /** * _virDriver: * @@ -749,6 +767,10 @@ struct _virDriver { virDrvDomainMigratePerform3 domainMigratePerform3; virDrvDomainMigrateFinish3 domainMigrateFinish3; virDrvDomainMigrateConfirm3 domainMigrateConfirm3; + virDrvDomainBlockPull domainBlockPull; + virDrvDomainBlockPullAll domainBlockPullAll; + virDrvDomainBlockPullAbort domainBlockPullAbort; + virDrvDomainGetBlockPullInfo domainGetBlockPullInfo; };
typedef int diff --git a/src/libvirt_public.syms b/src/libvirt_public.syms index 4d4299a..f2637ae 100644 --- a/src/libvirt_public.syms +++ b/src/libvirt_public.syms @@ -451,3 +451,10 @@ LIBVIRT_0.9.2 { } LIBVIRT_0.9.0;
# .... define new API here using predicted next version number .... +LIBVIRT_0.9.3 { + global: + virDomainBlockPull; + virDomainBlockPullAll; + virDomainBlockPullAbort; + virDomainGetBlockPullInfo; +} LIBVIRT_0.9.2; --
ACK Daniel -- |: http://berrange.com -o- http://www.flickr.com/photos/dberrange/ :| |: http://libvirt.org -o- http://virt-manager.org :| |: http://autobuild.org -o- http://search.cpan.org/~danberr/ :| |: http://entangle-photo.org -o- http://live.gnome.org/gtk-vnc :|
On 06/14/2011 03:47 AM, Daniel P. Berrange wrote:
On Thu, Jun 09, 2011 at 12:10:07PM -0500, Adam Litke wrote:
Set up the types for the block pull functions and insert them into the virDriver structure definition. Symbols are exported in this patch to prevent documentation compile failures.
* include/libvirt/libvirt.h.in: new API * src/driver.h: add the new entry to the driver structure * python/generator.py: fix compiler errors, the actual python bindings are implemented later * src/libvirt_public.syms: export symbols
+++ b/src/libvirt_public.syms @@ -451,3 +451,10 @@ LIBVIRT_0.9.2 { } LIBVIRT_0.9.0;
# .... define new API here using predicted next version number .... +LIBVIRT_0.9.3 { + global: + virDomainBlockPull; + virDomainBlockPullAll; + virDomainBlockPullAbort; + virDomainGetBlockPullInfo; +} LIBVIRT_0.9.2; --
Slight merge conflict here, but nothing too difficult.
ACK
Pushed. -- Eric Blake eblake@redhat.com +1-801-349-2682 Libvirt virtualization library http://libvirt.org
* src/libvirt.c: implement the main entry points Signed-off-by: Adam Litke <agl@us.ibm.com> --- src/libvirt.c | 252 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 files changed, 252 insertions(+), 0 deletions(-) diff --git a/src/libvirt.c b/src/libvirt.c index 997d4a2..71afea9 100644 --- a/src/libvirt.c +++ b/src/libvirt.c @@ -14957,3 +14957,255 @@ error: virDispatchError(conn); return -1; } + +/** + * virDomainBlockPull: + * @dom: pointer to domain object + * @path: Fully-qualified filename of disk + * @info: A pointer to a virDomainBlockPullInfo structure, or NULL + * @flags: currently unused, for future extension + * + * Populate a disk image with data from its backing image. Once all data from + * its backing image has been pulled, the disk no longer depends on a backing + * image. This function works incrementally, performing a small amount of work + * each time it is called. When successful, @info is updated with the current + * progress. + * + * Returns -1 in case of failure, 0 when successful. + */ +int virDomainBlockPull(virDomainPtr dom, + const char *path, + virDomainBlockPullInfoPtr info, + unsigned int flags) +{ + virConnectPtr conn; + + VIR_DOMAIN_DEBUG(dom, "path=%p, info=%p, flags=%u", path, info, flags); + + virResetLastError(); + + if (!VIR_IS_CONNECTED_DOMAIN (dom)) { + virLibDomainError(VIR_ERR_INVALID_DOMAIN, __FUNCTION__); + virDispatchError(NULL); + return -1; + } + conn = dom->conn; + + if (dom->conn->flags & VIR_CONNECT_RO) { + virLibDomainError(VIR_ERR_OPERATION_DENIED, __FUNCTION__); + goto error; + } + + if (!path) { + virLibDomainError(VIR_ERR_INVALID_ARG, + _("path is NULL")); + goto error; + } + + if (flags != 0) { + virLibDomainError(VIR_ERR_INVALID_ARG, + _("flags must be zero")); + goto error; + } + + if (conn->driver->domainBlockPull) { + int ret; + ret = conn->driver->domainBlockPull(dom, path, info, flags); + if (ret < 0) + goto error; + return ret; + } + + virLibDomainError(VIR_ERR_NO_SUPPORT, __FUNCTION__); + +error: + virDispatchError(dom->conn); + return -1; +} + +/** + * virDomainBlockPullAll: + * @dom: pointer to domain object + * @path: Fully-qualified filename of disk + * @flags: currently unused, for future extension + * + * Populate a disk image with data from its backing image. Once all data from + * its backing image has been pulled, the disk no longer depends on a backing + * image. This function pulls data for the entire device in the background. + * Progress of the operation can be checked with virDomainGetBlockPullInfo() and + * the operation can be aborted with virDomainBlockPullAbort(). When finished, + * an asynchronous event is raised to indicate the final status. + * + * Returns 0 if the operation has started, -1 on failure. + */ +int virDomainBlockPullAll(virDomainPtr dom, + const char *path, + unsigned int flags) +{ + virConnectPtr conn; + + VIR_DOMAIN_DEBUG(dom, "path=%p, flags=%u", path, flags); + + virResetLastError(); + + if (!VIR_IS_CONNECTED_DOMAIN (dom)) { + virLibDomainError(VIR_ERR_INVALID_DOMAIN, __FUNCTION__); + virDispatchError(NULL); + return -1; + } + conn = dom->conn; + + if (dom->conn->flags & VIR_CONNECT_RO) { + virLibDomainError(VIR_ERR_OPERATION_DENIED, __FUNCTION__); + goto error; + } + + if (!path) { + virLibDomainError(VIR_ERR_INVALID_ARG, + _("path is NULL")); + goto error; + } + + if (flags != 0) { + virLibDomainError(VIR_ERR_INVALID_ARG, + _("flags must be zero")); + goto error; + } + + if (conn->driver->domainBlockPullAll) { + int ret; + ret = conn->driver->domainBlockPullAll(dom, path, flags); + if (ret < 0) + goto error; + return ret; + } + + virLibDomainError(VIR_ERR_NO_SUPPORT, __FUNCTION__); + +error: + virDispatchError(dom->conn); + return -1; +} + +/** + * virDomainBlockPullAbort: + * @dom: pointer to domain object + * @path: fully-qualified filename of disk + * @flags: currently unused, for future extension + * + * Cancel a pull operation previously started by virDomainBlockPullAll(). + * + * Returns -1 in case of failure, 0 when successful. + */ +int virDomainBlockPullAbort(virDomainPtr dom, + const char *path, + unsigned int flags) +{ + virConnectPtr conn; + + VIR_DOMAIN_DEBUG(dom, "path=%p, flags=%u", path, flags); + + virResetLastError(); + + if (!VIR_IS_CONNECTED_DOMAIN (dom)) { + virLibDomainError(VIR_ERR_INVALID_DOMAIN, __FUNCTION__); + virDispatchError(NULL); + return -1; + } + conn = dom->conn; + + if (dom->conn->flags & VIR_CONNECT_RO) { + virLibDomainError(VIR_ERR_OPERATION_DENIED, __FUNCTION__); + goto error; + } + + if (!path) { + virLibDomainError(VIR_ERR_INVALID_ARG, + _("path is NULL")); + goto error; + } + + if (flags != 0) { + virLibDomainError(VIR_ERR_INVALID_ARG, + _("flags must be zero")); + goto error; + } + + if (conn->driver->domainBlockPullAbort) { + int ret; + ret = conn->driver->domainBlockPullAbort(dom, path, flags); + if (ret < 0) + goto error; + return ret; + } + + virLibDomainError(VIR_ERR_NO_SUPPORT, __FUNCTION__); + +error: + virDispatchError(dom->conn); + return -1; +} + +/** + * virDomainGetBlockPullInfo: + * @dom: pointer to domain object + * @path: fully-qualified filename of disk + * @info: pointer to a virDomainBlockPullInfo structure + * @flags: currently unused, for future extension + * + * Request progress information on a block pull operation that has been started + * with virDomainBlockPullAll(). If an operation is active for the given + * parameters, @info will be updated with the current progress. + * + * Returns -1 in case of failure, 0 when successful. + */ +int virDomainGetBlockPullInfo(virDomainPtr dom, + const char *path, + virDomainBlockPullInfoPtr info, + unsigned int flags) +{ + virConnectPtr conn; + + VIR_DOMAIN_DEBUG(dom, "path=%p, info=%p, flags=%u", path, info, flags); + + virResetLastError(); + + if (!VIR_IS_CONNECTED_DOMAIN (dom)) { + virLibDomainError(VIR_ERR_INVALID_DOMAIN, __FUNCTION__); + virDispatchError(NULL); + return -1; + } + conn = dom->conn; + + if (!path) { + virLibDomainError(VIR_ERR_INVALID_ARG, + _("path is NULL")); + goto error; + } + + if (!info) { + virLibDomainError(VIR_ERR_INVALID_ARG, + _("info is NULL")); + goto error; + } + + if (flags != 0) { + virLibDomainError(VIR_ERR_INVALID_ARG, + _("flags must be zero")); + goto error; + } + + if (conn->driver->domainGetBlockPullInfo) { + int ret; + ret = conn->driver->domainGetBlockPullInfo(dom, path, info, flags); + if (ret < 0) + goto error; + return ret; + } + + virLibDomainError(VIR_ERR_NO_SUPPORT, __FUNCTION__); + +error: + virDispatchError(dom->conn); + return -1; +} -- 1.7.3
On Thu, Jun 09, 2011 at 12:10:08PM -0500, Adam Litke wrote:
* src/libvirt.c: implement the main entry points
Signed-off-by: Adam Litke <agl@us.ibm.com> --- src/libvirt.c | 252 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 files changed, 252 insertions(+), 0 deletions(-)
diff --git a/src/libvirt.c b/src/libvirt.c index 997d4a2..71afea9 100644 --- a/src/libvirt.c +++ b/src/libvirt.c @@ -14957,3 +14957,255 @@ error: virDispatchError(conn); return -1; } + +/** + * virDomainBlockPull: + * @dom: pointer to domain object + * @path: Fully-qualified filename of disk + * @info: A pointer to a virDomainBlockPullInfo structure, or NULL + * @flags: currently unused, for future extension + * + * Populate a disk image with data from its backing image. Once all data from + * its backing image has been pulled, the disk no longer depends on a backing + * image. This function works incrementally, performing a small amount of work + * each time it is called. When successful, @info is updated with the current + * progress. + * + * Returns -1 in case of failure, 0 when successful. + */ +int virDomainBlockPull(virDomainPtr dom, + const char *path, + virDomainBlockPullInfoPtr info, + unsigned int flags) +{ + virConnectPtr conn; + + VIR_DOMAIN_DEBUG(dom, "path=%p, info=%p, flags=%u", path, info, flags); + + virResetLastError(); + + if (!VIR_IS_CONNECTED_DOMAIN (dom)) { + virLibDomainError(VIR_ERR_INVALID_DOMAIN, __FUNCTION__); + virDispatchError(NULL); + return -1; + } + conn = dom->conn; + + if (dom->conn->flags & VIR_CONNECT_RO) { + virLibDomainError(VIR_ERR_OPERATION_DENIED, __FUNCTION__); + goto error; + } + + if (!path) { + virLibDomainError(VIR_ERR_INVALID_ARG, + _("path is NULL")); + goto error; + } + + if (flags != 0) { + virLibDomainError(VIR_ERR_INVALID_ARG, + _("flags must be zero")); + goto error; + }
We don't want to check 'flags' in this place, because you could be a client app talking to a libvirt daemon which *does* support some flag values. Instead just have a 'virCheckFlags(0, -1)' in the QEMU driver impls. Same comment applies to all the other APIs in this patch
+ + if (conn->driver->domainBlockPull) { + int ret; + ret = conn->driver->domainBlockPull(dom, path, info, flags); + if (ret < 0) + goto error; + return ret; + } + + virLibDomainError(VIR_ERR_NO_SUPPORT, __FUNCTION__); + +error: + virDispatchError(dom->conn); + return -1; +} + +/** + * virDomainBlockPullAll: + * @dom: pointer to domain object + * @path: Fully-qualified filename of disk + * @flags: currently unused, for future extension + * + * Populate a disk image with data from its backing image. Once all data from + * its backing image has been pulled, the disk no longer depends on a backing + * image. This function pulls data for the entire device in the background. + * Progress of the operation can be checked with virDomainGetBlockPullInfo() and + * the operation can be aborted with virDomainBlockPullAbort(). When finished, + * an asynchronous event is raised to indicate the final status. + * + * Returns 0 if the operation has started, -1 on failure. + */ +int virDomainBlockPullAll(virDomainPtr dom, + const char *path, + unsigned int flags) +{ + virConnectPtr conn; + + VIR_DOMAIN_DEBUG(dom, "path=%p, flags=%u", path, flags); + + virResetLastError(); + + if (!VIR_IS_CONNECTED_DOMAIN (dom)) { + virLibDomainError(VIR_ERR_INVALID_DOMAIN, __FUNCTION__); + virDispatchError(NULL); + return -1; + } + conn = dom->conn; + + if (dom->conn->flags & VIR_CONNECT_RO) { + virLibDomainError(VIR_ERR_OPERATION_DENIED, __FUNCTION__); + goto error; + } + + if (!path) { + virLibDomainError(VIR_ERR_INVALID_ARG, + _("path is NULL")); + goto error; + } + + if (flags != 0) { + virLibDomainError(VIR_ERR_INVALID_ARG, + _("flags must be zero")); + goto error; + } + + if (conn->driver->domainBlockPullAll) { + int ret; + ret = conn->driver->domainBlockPullAll(dom, path, flags); + if (ret < 0) + goto error; + return ret; + } + + virLibDomainError(VIR_ERR_NO_SUPPORT, __FUNCTION__); + +error: + virDispatchError(dom->conn); + return -1; +} + +/** + * virDomainBlockPullAbort: + * @dom: pointer to domain object + * @path: fully-qualified filename of disk + * @flags: currently unused, for future extension + * + * Cancel a pull operation previously started by virDomainBlockPullAll(). + * + * Returns -1 in case of failure, 0 when successful. + */ +int virDomainBlockPullAbort(virDomainPtr dom, + const char *path, + unsigned int flags) +{ + virConnectPtr conn; + + VIR_DOMAIN_DEBUG(dom, "path=%p, flags=%u", path, flags); + + virResetLastError(); + + if (!VIR_IS_CONNECTED_DOMAIN (dom)) { + virLibDomainError(VIR_ERR_INVALID_DOMAIN, __FUNCTION__); + virDispatchError(NULL); + return -1; + } + conn = dom->conn; + + if (dom->conn->flags & VIR_CONNECT_RO) { + virLibDomainError(VIR_ERR_OPERATION_DENIED, __FUNCTION__); + goto error; + } + + if (!path) { + virLibDomainError(VIR_ERR_INVALID_ARG, + _("path is NULL")); + goto error; + } + + if (flags != 0) { + virLibDomainError(VIR_ERR_INVALID_ARG, + _("flags must be zero")); + goto error; + } + + if (conn->driver->domainBlockPullAbort) { + int ret; + ret = conn->driver->domainBlockPullAbort(dom, path, flags); + if (ret < 0) + goto error; + return ret; + } + + virLibDomainError(VIR_ERR_NO_SUPPORT, __FUNCTION__); + +error: + virDispatchError(dom->conn); + return -1; +} + +/** + * virDomainGetBlockPullInfo: + * @dom: pointer to domain object + * @path: fully-qualified filename of disk + * @info: pointer to a virDomainBlockPullInfo structure + * @flags: currently unused, for future extension + * + * Request progress information on a block pull operation that has been started + * with virDomainBlockPullAll(). If an operation is active for the given + * parameters, @info will be updated with the current progress. + * + * Returns -1 in case of failure, 0 when successful. + */ +int virDomainGetBlockPullInfo(virDomainPtr dom, + const char *path, + virDomainBlockPullInfoPtr info, + unsigned int flags) +{ + virConnectPtr conn; + + VIR_DOMAIN_DEBUG(dom, "path=%p, info=%p, flags=%u", path, info, flags); + + virResetLastError(); + + if (!VIR_IS_CONNECTED_DOMAIN (dom)) { + virLibDomainError(VIR_ERR_INVALID_DOMAIN, __FUNCTION__); + virDispatchError(NULL); + return -1; + } + conn = dom->conn; + + if (!path) { + virLibDomainError(VIR_ERR_INVALID_ARG, + _("path is NULL")); + goto error; + } + + if (!info) { + virLibDomainError(VIR_ERR_INVALID_ARG, + _("info is NULL")); + goto error; + } + + if (flags != 0) { + virLibDomainError(VIR_ERR_INVALID_ARG, + _("flags must be zero")); + goto error; + } + + if (conn->driver->domainGetBlockPullInfo) { + int ret; + ret = conn->driver->domainGetBlockPullInfo(dom, path, info, flags); + if (ret < 0) + goto error; + return ret; + } + + virLibDomainError(VIR_ERR_NO_SUPPORT, __FUNCTION__); + +error: + virDispatchError(dom->conn); + return -1; +}
ACK if the bogus flags test is removed. Daniel -- |: http://berrange.com -o- http://www.flickr.com/photos/dberrange/ :| |: http://libvirt.org -o- http://virt-manager.org :| |: http://autobuild.org -o- http://search.cpan.org/~danberr/ :| |: http://entangle-photo.org -o- http://live.gnome.org/gtk-vnc :|
On 06/14/2011 04:49 AM, Daniel P. Berrange wrote:
On Thu, Jun 09, 2011 at 12:10:08PM -0500, Adam Litke wrote:
+ if (flags != 0) { + virLibDomainError(VIR_ERR_INVALID_ARG, + _("flags must be zero")); + goto error; + }
We don't want to check 'flags' in this place, because you could be a client app talking to a libvirt daemon which *does* support some flag values. Instead just have a 'virCheckFlags(0, -1)' in the QEMU driver impls. Same comment applies to all the other APIs in this patch
Yep, makes sense and changed in the next version. -- Adam Litke IBM Linux Technology Center
The generator can handle DomainBlockPullAll and DomainBlockPullAbort. DomainBlockPull and DomainBlockPullInfo must be written by hand. * src/remote/remote_protocol.x: provide defines for the new entry points * src/remote/remote_driver.c daemon/remote.c: implement the client and server side * src/remote_protocol-structs: structure definitions for protocol verification Signed-off-by: Adam Litke <agl@us.ibm.com> --- daemon/remote.c | 71 ++++++++++++++++++++++++++++++++++++++++++ src/remote/remote_driver.c | 68 ++++++++++++++++++++++++++++++++++++++++ src/remote/remote_protocol.x | 40 +++++++++++++++++++++++- src/remote_protocol-structs | 28 ++++++++++++++++ 4 files changed, 206 insertions(+), 1 deletions(-) diff --git a/daemon/remote.c b/daemon/remote.c index 49058f2..e0b681c 100644 --- a/daemon/remote.c +++ b/daemon/remote.c @@ -1474,6 +1474,77 @@ cleanup: return rv; } +static int +remoteDispatchDomainBlockPull(struct qemud_server *server ATTRIBUTE_UNUSED, + struct qemud_client *client ATTRIBUTE_UNUSED, + virConnectPtr conn, + remote_message_header *hdr ATTRIBUTE_UNUSED, + remote_error * rerr, + remote_domain_block_pull_args *args, + remote_domain_block_pull_ret *ret) +{ + virDomainPtr dom = NULL; + virDomainBlockPullInfo tmp; + int rv = -1; + + if (!conn) { + virNetError(VIR_ERR_INTERNAL_ERROR, "%s", _("connection not open")); + goto cleanup; + } + + if (!(dom = get_nonnull_domain(conn, args->dom))) + goto cleanup; + + if (virDomainBlockPull(dom, args->path, &tmp, args->flags) < 0) + goto cleanup; + rv = 0; + ret->cur = tmp.cur; + ret->end = tmp.end; + +cleanup: + if (rv < 0) + remoteDispatchError(rerr); + if (dom) + virDomainFree(dom); + return rv; +} + +static int +remoteDispatchDomainGetBlockPullInfo(struct qemud_server *server ATTRIBUTE_UNUSED, + struct qemud_client *client ATTRIBUTE_UNUSED, + virConnectPtr conn, + remote_message_header *hdr ATTRIBUTE_UNUSED, + remote_error * rerr, + remote_domain_get_block_pull_info_args *args, + remote_domain_get_block_pull_info_ret *ret) +{ + virDomainPtr dom = NULL; + virDomainBlockPullInfo tmp; + int rv = -1; + + if (!conn) { + virNetError(VIR_ERR_INTERNAL_ERROR, "%s", _("connection not open")); + goto cleanup; + } + + if (!(dom = get_nonnull_domain(conn, args->dom))) + goto cleanup; + + if (virDomainGetBlockPullInfo(dom, args->path, &tmp, args->flags) < 0) + goto cleanup; + rv = 0; + ret->cur = tmp.cur; + ret->end = tmp.end; + +cleanup: + if (rv < 0) + remoteDispatchError(rerr); + if (dom) + virDomainFree(dom); + return rv; +} + + /*-------------------------------------------------------------*/ static int diff --git a/src/remote/remote_driver.c b/src/remote/remote_driver.c index 8335a1a..de9359d 100644 --- a/src/remote/remote_driver.c +++ b/src/remote/remote_driver.c @@ -2509,6 +2509,70 @@ done: return rv; } +static int remoteDomainBlockPull(virDomainPtr domain, + const char *path, + virDomainBlockPullInfoPtr info, + unsigned int flags) +{ + int rv = -1; + remote_domain_block_pull_args args; + remote_domain_block_pull_ret ret; + struct private_data *priv = domain->conn->privateData; + + remoteDriverLock(priv); + + make_nonnull_domain(&args.dom, domain); + args.path = (char *)path; + args.flags = flags; + + if (call(domain->conn, priv, 0, REMOTE_PROC_DOMAIN_BLOCK_PULL, + (xdrproc_t)xdr_remote_domain_block_pull_args, (char *)&args, + (xdrproc_t)xdr_remote_domain_block_pull_ret, (char *)&ret) == -1) + goto done; + + if (info) { + info->cur = ret.cur; + info->end = ret.end; + } + rv = 0; + +done: + remoteDriverUnlock(priv); + return rv; +} + +static int remoteDomainGetBlockPullInfo(virDomainPtr domain, + const char *path, + virDomainBlockPullInfoPtr info, + unsigned int flags) +{ + int rv = -1; + remote_domain_get_block_pull_info_args args; + remote_domain_get_block_pull_info_ret ret; + struct private_data *priv = domain->conn->privateData; + + remoteDriverLock(priv); + + make_nonnull_domain(&args.dom, domain); + args.path = (char *)path; + args.flags = flags; + + if (call(domain->conn, priv, 0, REMOTE_PROC_DOMAIN_GET_BLOCK_PULL_INFO, + (xdrproc_t)xdr_remote_domain_get_block_pull_info_args, + (char *)&args, + (xdrproc_t)xdr_remote_domain_get_block_pull_info_ret, + (char *)&ret) == -1) + goto done; + + info->cur = ret.cur; + info->end = ret.end; + rv = 0; + +done: + remoteDriverUnlock(priv); + return rv; +} + /*----------------------------------------------------------------------*/ static virDrvOpenStatus ATTRIBUTE_NONNULL (1) @@ -6337,6 +6401,10 @@ static virDriver remote_driver = { .domainMigratePerform3 = remoteDomainMigratePerform3, /* 0.9.2 */ .domainMigrateFinish3 = remoteDomainMigrateFinish3, /* 0.9.2 */ .domainMigrateConfirm3 = remoteDomainMigrateConfirm3, /* 0.9.2 */ + .domainBlockPull = remoteDomainBlockPull, /* 0.9.2 */ + .domainBlockPullAll = remoteDomainBlockPullAll, /* 0.9.2 */ + .domainBlockPullAbort = remoteDomainBlockPullAbort, /* 0.9.2 */ + .domainGetBlockPullInfo = remoteDomainGetBlockPullInfo, /* 0.9.2 */ }; static virNetworkDriver network_driver = { diff --git a/src/remote/remote_protocol.x b/src/remote/remote_protocol.x index c9b8cff..33669c2 100644 --- a/src/remote/remote_protocol.x +++ b/src/remote/remote_protocol.x @@ -911,6 +911,40 @@ struct remote_domain_set_autostart_args { int autostart; }; +struct remote_domain_block_pull_args { + remote_nonnull_domain dom; + remote_nonnull_string path; + unsigned int flags; +}; + +struct remote_domain_block_pull_ret { + unsigned hyper cur; + unsigned hyper end; +}; + +struct remote_domain_block_pull_all_args { + remote_nonnull_domain dom; + remote_nonnull_string path; + unsigned int flags; +}; + +struct remote_domain_block_pull_abort_args { + remote_nonnull_domain dom; + remote_nonnull_string path; + unsigned int flags; +}; + +struct remote_domain_get_block_pull_info_args { + remote_nonnull_domain dom; + remote_nonnull_string path; + unsigned int flags; +}; + +struct remote_domain_get_block_pull_info_ret { + unsigned hyper cur; + unsigned hyper end; +}; + /* Network calls: */ struct remote_num_of_networks_ret { @@ -2297,7 +2331,11 @@ enum remote_procedure { REMOTE_PROC_INTERFACE_CHANGE_COMMIT = 221, /* autogen autogen */ REMOTE_PROC_INTERFACE_CHANGE_ROLLBACK = 222, /* autogen autogen */ REMOTE_PROC_DOMAIN_GET_SCHEDULER_PARAMETERS_FLAGS = 223, /* skipgen autogen */ - REMOTE_PROC_DOMAIN_EVENT_CONTROL_ERROR = 224 /* skipgen skipgen */ + REMOTE_PROC_DOMAIN_EVENT_CONTROL_ERROR = 224, /* skipgen skipgen */ + REMOTE_PROC_DOMAIN_BLOCK_PULL = 225, /* skipgen skipgen */ + REMOTE_PROC_DOMAIN_BLOCK_PULL_ALL = 226, /* autogen autogen */ + REMOTE_PROC_DOMAIN_BLOCK_PULL_ABORT = 227, /* autogen autogen */ + REMOTE_PROC_DOMAIN_GET_BLOCK_PULL_INFO = 228 /* skipgen skipgen */ /* * Notice how the entries are grouped in sets of 10 ? diff --git a/src/remote_protocol-structs b/src/remote_protocol-structs index 1d90dd5..547f6e2 100644 --- a/src/remote_protocol-structs +++ b/src/remote_protocol-structs @@ -603,6 +603,34 @@ struct remote_domain_set_autostart_args { remote_nonnull_domain dom; int autostart; }; +struct remote_domain_block_pull_args { + remote_nonnull_domain dom; + remote_nonnull_string path; + u_int flags; +}; +struct remote_domain_block_pull_ret { + uint64_t cur; + uint64_t end; +}; +struct remote_domain_block_pull_all_args { + remote_nonnull_domain dom; + remote_nonnull_string path; + u_int flags; +}; +struct remote_domain_block_pull_abort_args { + remote_nonnull_domain dom; + remote_nonnull_string path; + u_int flags; +}; +struct remote_domain_get_block_pull_info_args { + remote_nonnull_domain dom; + remote_nonnull_string path; + u_int flags; +}; +struct remote_domain_get_block_pull_info_ret { + uint64_t cur; + uint64_t end; +}; struct remote_num_of_networks_ret { int num; }; -- 1.7.3
On Thu, Jun 09, 2011 at 12:10:09PM -0500, Adam Litke wrote:
The generator can handle DomainBlockPullAll and DomainBlockPullAbort. DomainBlockPull and DomainBlockPullInfo must be written by hand.
* src/remote/remote_protocol.x: provide defines for the new entry points * src/remote/remote_driver.c daemon/remote.c: implement the client and server side * src/remote_protocol-structs: structure definitions for protocol verification
Signed-off-by: Adam Litke <agl@us.ibm.com> --- daemon/remote.c | 71 ++++++++++++++++++++++++++++++++++++++++++ src/remote/remote_driver.c | 68 ++++++++++++++++++++++++++++++++++++++++ src/remote/remote_protocol.x | 40 +++++++++++++++++++++++- src/remote_protocol-structs | 28 ++++++++++++++++ 4 files changed, 206 insertions(+), 1 deletions(-)
diff --git a/daemon/remote.c b/daemon/remote.c index 49058f2..e0b681c 100644 --- a/daemon/remote.c +++ b/daemon/remote.c @@ -1474,6 +1474,77 @@ cleanup: return rv; }
+static int +remoteDispatchDomainBlockPull(struct qemud_server *server ATTRIBUTE_UNUSED, + struct qemud_client *client ATTRIBUTE_UNUSED, + virConnectPtr conn, + remote_message_header *hdr ATTRIBUTE_UNUSED, + remote_error * rerr, + remote_domain_block_pull_args *args, + remote_domain_block_pull_ret *ret) +{ + virDomainPtr dom = NULL; + virDomainBlockPullInfo tmp; + int rv = -1; + + if (!conn) { + virNetError(VIR_ERR_INTERNAL_ERROR, "%s", _("connection not open")); + goto cleanup; + } + + if (!(dom = get_nonnull_domain(conn, args->dom))) + goto cleanup; + + if (virDomainBlockPull(dom, args->path, &tmp, args->flags) < 0) + goto cleanup; + rv = 0; + ret->cur = tmp.cur; + ret->end = tmp.end;
'rv = 0' should really be the last statement before the cleanup label. Likewise for next method.
+ +cleanup: + if (rv < 0) + remoteDispatchError(rerr); + if (dom) + virDomainFree(dom); + return rv; +} + +static int +remoteDispatchDomainGetBlockPullInfo(struct qemud_server *server ATTRIBUTE_UNUSED, + struct qemud_client *client ATTRIBUTE_UNUSED, + virConnectPtr conn, + remote_message_header *hdr ATTRIBUTE_UNUSED, + remote_error * rerr, + remote_domain_get_block_pull_info_args *args, + remote_domain_get_block_pull_info_ret *ret) +{ + virDomainPtr dom = NULL; + virDomainBlockPullInfo tmp; + int rv = -1; + + if (!conn) { + virNetError(VIR_ERR_INTERNAL_ERROR, "%s", _("connection not open")); + goto cleanup; + } + + if (!(dom = get_nonnull_domain(conn, args->dom))) + goto cleanup; + + if (virDomainGetBlockPullInfo(dom, args->path, &tmp, args->flags) < 0) + goto cleanup; + rv = 0; + ret->cur = tmp.cur; + ret->end = tmp.end; + +cleanup: + if (rv < 0) + remoteDispatchError(rerr); + if (dom) + virDomainFree(dom); + return rv; +} + + /*-------------------------------------------------------------*/
static int diff --git a/src/remote/remote_driver.c b/src/remote/remote_driver.c index 8335a1a..de9359d 100644 --- a/src/remote/remote_driver.c +++ b/src/remote/remote_driver.c @@ -2509,6 +2509,70 @@ done: return rv; }
+static int remoteDomainBlockPull(virDomainPtr domain, + const char *path, + virDomainBlockPullInfoPtr info, + unsigned int flags) +{ + int rv = -1; + remote_domain_block_pull_args args; + remote_domain_block_pull_ret ret; + struct private_data *priv = domain->conn->privateData; + + remoteDriverLock(priv); + + make_nonnull_domain(&args.dom, domain); + args.path = (char *)path; + args.flags = flags; + + if (call(domain->conn, priv, 0, REMOTE_PROC_DOMAIN_BLOCK_PULL, + (xdrproc_t)xdr_remote_domain_block_pull_args, (char *)&args, + (xdrproc_t)xdr_remote_domain_block_pull_ret, (char *)&ret) == -1) + goto done; + + if (info) { + info->cur = ret.cur; + info->end = ret.end; + } + rv = 0; + +done: + remoteDriverUnlock(priv); + return rv; +} + +static int remoteDomainGetBlockPullInfo(virDomainPtr domain, + const char *path, + virDomainBlockPullInfoPtr info, + unsigned int flags) +{ + int rv = -1; + remote_domain_get_block_pull_info_args args; + remote_domain_get_block_pull_info_ret ret; + struct private_data *priv = domain->conn->privateData; + + remoteDriverLock(priv); + + make_nonnull_domain(&args.dom, domain); + args.path = (char *)path; + args.flags = flags; + + if (call(domain->conn, priv, 0, REMOTE_PROC_DOMAIN_GET_BLOCK_PULL_INFO, + (xdrproc_t)xdr_remote_domain_get_block_pull_info_args, + (char *)&args, + (xdrproc_t)xdr_remote_domain_get_block_pull_info_ret, + (char *)&ret) == -1) + goto done; + + info->cur = ret.cur; + info->end = ret.end; + rv = 0; + +done: + remoteDriverUnlock(priv); + return rv; +} + /*----------------------------------------------------------------------*/
static virDrvOpenStatus ATTRIBUTE_NONNULL (1) @@ -6337,6 +6401,10 @@ static virDriver remote_driver = { .domainMigratePerform3 = remoteDomainMigratePerform3, /* 0.9.2 */ .domainMigrateFinish3 = remoteDomainMigrateFinish3, /* 0.9.2 */ .domainMigrateConfirm3 = remoteDomainMigrateConfirm3, /* 0.9.2 */ + .domainBlockPull = remoteDomainBlockPull, /* 0.9.2 */ + .domainBlockPullAll = remoteDomainBlockPullAll, /* 0.9.2 */ + .domainBlockPullAbort = remoteDomainBlockPullAbort, /* 0.9.2 */ + .domainGetBlockPullInfo = remoteDomainGetBlockPullInfo, /* 0.9.2 */ };
These need updating to 0.9.3 Daniel -- |: http://berrange.com -o- http://www.flickr.com/photos/dberrange/ :| |: http://libvirt.org -o- http://virt-manager.org :| |: http://autobuild.org -o- http://search.cpan.org/~danberr/ :| |: http://entangle-photo.org -o- http://live.gnome.org/gtk-vnc :|
On 06/14/2011 04:49 AM, Daniel P. Berrange wrote:
On Thu, Jun 09, 2011 at 12:10:09PM -0500, Adam Litke wrote:
The generator can handle DomainBlockPullAll and DomainBlockPullAbort. DomainBlockPull and DomainBlockPullInfo must be written by hand.
* src/remote/remote_protocol.x: provide defines for the new entry points * src/remote/remote_driver.c daemon/remote.c: implement the client and server side * src/remote_protocol-structs: structure definitions for protocol verification
Signed-off-by: Adam Litke <agl@us.ibm.com> --- daemon/remote.c | 71 ++++++++++++++++++++++++++++++++++++++++++ src/remote/remote_driver.c | 68 ++++++++++++++++++++++++++++++++++++++++ src/remote/remote_protocol.x | 40 +++++++++++++++++++++++- src/remote_protocol-structs | 28 ++++++++++++++++ 4 files changed, 206 insertions(+), 1 deletions(-)
diff --git a/daemon/remote.c b/daemon/remote.c index 49058f2..e0b681c 100644 --- a/daemon/remote.c +++ b/daemon/remote.c @@ -1474,6 +1474,77 @@ cleanup: return rv; }
+static int +remoteDispatchDomainBlockPull(struct qemud_server *server ATTRIBUTE_UNUSED, + struct qemud_client *client ATTRIBUTE_UNUSED, + virConnectPtr conn, + remote_message_header *hdr ATTRIBUTE_UNUSED, + remote_error * rerr, + remote_domain_block_pull_args *args, + remote_domain_block_pull_ret *ret) +{ + virDomainPtr dom = NULL; + virDomainBlockPullInfo tmp; + int rv = -1; + + if (!conn) { + virNetError(VIR_ERR_INTERNAL_ERROR, "%s", _("connection not open")); + goto cleanup; + } + + if (!(dom = get_nonnull_domain(conn, args->dom))) + goto cleanup; + + if (virDomainBlockPull(dom, args->path, &tmp, args->flags) < 0) + goto cleanup; + rv = 0; + ret->cur = tmp.cur; + ret->end = tmp.end;
'rv = 0' should really be the last statement before the cleanup label. Likewise for next method.
Ok.
static virDrvOpenStatus ATTRIBUTE_NONNULL (1) @@ -6337,6 +6401,10 @@ static virDriver remote_driver = { .domainMigratePerform3 = remoteDomainMigratePerform3, /* 0.9.2 */ .domainMigrateFinish3 = remoteDomainMigrateFinish3, /* 0.9.2 */ .domainMigrateConfirm3 = remoteDomainMigrateConfirm3, /* 0.9.2 */ + .domainBlockPull = remoteDomainBlockPull, /* 0.9.2 */ + .domainBlockPullAll = remoteDomainBlockPullAll, /* 0.9.2 */ + .domainBlockPullAbort = remoteDomainBlockPullAbort, /* 0.9.2 */ + .domainGetBlockPullInfo = remoteDomainGetBlockPullInfo, /* 0.9.2 */ };
These need updating to 0.9.3
Ok, Got these and the qemu ones. -- Adam Litke IBM Linux Technology Center
The virDomainBlockPull* family of commands are enabled by the 'block_stream' and 'info block_stream' qemu monitor commands. * src/qemu/qemu_driver.c src/qemu/qemu_monitor_text.[ch]: implement disk streaming by using the stream and info stream text monitor commands * src/qemu/qemu_monitor_json.[ch]: implement commands using the qmp monitor Signed-off-by: Adam Litke <agl@us.ibm.com> --- src/qemu/qemu_driver.c | 108 +++++++++++++++++++++++++++++ src/qemu/qemu_monitor.c | 16 ++++ src/qemu/qemu_monitor.h | 13 ++++ src/qemu/qemu_monitor_json.c | 131 +++++++++++++++++++++++++++++++++++ src/qemu/qemu_monitor_json.h | 4 + src/qemu/qemu_monitor_text.c | 156 ++++++++++++++++++++++++++++++++++++++++++ src/qemu/qemu_monitor_text.h | 5 ++ 7 files changed, 433 insertions(+), 0 deletions(-) diff --git a/src/qemu/qemu_driver.c b/src/qemu/qemu_driver.c index 80de79a..1cbb151 100644 --- a/src/qemu/qemu_driver.c +++ b/src/qemu/qemu_driver.c @@ -7971,6 +7971,110 @@ cleanup: return ret; } +static const char * +qemuDiskPathToAlias(virDomainObjPtr vm, const char *path) { + int i; + char *ret = NULL; + + for (i = 0 ; i < vm->def->ndisks ; i++) { + virDomainDiskDefPtr disk = vm->def->disks[i]; + + if (disk->src != NULL && STREQ(disk->src, path)) { + if (virAsprintf(&ret, "drive-%s", disk->info.alias) < 0) { + virReportOOMError(); + return NULL; + } + break; + } + } + + if (!ret) { + qemuReportError(VIR_ERR_INVALID_ARG, + "%s", _("No device found for specified path")); + } + return ret; +} + +static int +qemuDomainBlockPullImpl(virDomainPtr dom, const char *path, + virDomainBlockPullInfoPtr info, + int mode) +{ + struct qemud_driver *driver = dom->conn->privateData; + virDomainObjPtr vm = NULL; + qemuDomainObjPrivatePtr priv; + char uuidstr[VIR_UUID_STRING_BUFLEN]; + const char *device = NULL; + int ret = -1; + + qemuDriverLock(driver); + virUUIDFormat(dom->uuid, uuidstr); + vm = virDomainFindByUUID(&driver->domains, dom->uuid); + if (!vm) { + qemuReportError(VIR_ERR_NO_DOMAIN, + _("no domain with matching uuid '%s'"), uuidstr); + goto cleanup; + } + + if (!virDomainObjIsActive(vm)) { + qemuReportError(VIR_ERR_OPERATION_INVALID, + "%s", _("domain is not running")); + goto cleanup; + } + + device = qemuDiskPathToAlias(vm, path); + if (!device) { + goto cleanup; + } + + if (qemuDomainObjBeginJobWithDriver(driver, vm) < 0) + goto cleanup; + qemuDomainObjEnterMonitorWithDriver(driver, vm); + priv = vm->privateData; + ret = qemuMonitorBlockPull(priv->mon, device, info, mode); + qemuDomainObjExitMonitorWithDriver(driver, vm); + if (qemuDomainObjEndJob(vm) == 0) { + vm = NULL; + goto cleanup; + } + +cleanup: + VIR_FREE(device); + if (vm) + virDomainObjUnlock(vm); + qemuDriverUnlock(driver); + return ret; +} + +static int +qemuDomainBlockPull(virDomainPtr dom, const char *path, + virDomainBlockPullInfoPtr info, unsigned int flags) +{ + virCheckFlags(0, -1); + return qemuDomainBlockPullImpl(dom, path, info, BLOCK_PULL_MODE_ONE); +} + +static int +qemuDomainBlockPullAll(virDomainPtr dom, const char *path, unsigned int flags) +{ + virCheckFlags(0, -1); + return qemuDomainBlockPullImpl(dom, path, NULL, BLOCK_PULL_MODE_ALL); +} + +static int +qemuDomainBlockPullAbort(virDomainPtr dom, const char *path, unsigned int flags) +{ + virCheckFlags(0, -1); + return qemuDomainBlockPullImpl(dom, path, NULL, BLOCK_PULL_MODE_ABORT); +} + +static int +qemuDomainGetBlockPullInfo(virDomainPtr dom, const char *path, + virDomainBlockPullInfoPtr info, unsigned int flags) +{ + virCheckFlags(0, -1); + return qemuDomainBlockPullImpl(dom, path, info, BLOCK_PULL_MODE_INFO); +} static virDriver qemuDriver = { .no = VIR_DRV_QEMU, @@ -8090,6 +8194,10 @@ static virDriver qemuDriver = { .domainMigratePerform3 = qemuDomainMigratePerform3, /* 0.9.2 */ .domainMigrateFinish3 = qemuDomainMigrateFinish3, /* 0.9.2 */ .domainMigrateConfirm3 = qemuDomainMigrateConfirm3, /* 0.9.2 */ + .domainBlockPull = qemuDomainBlockPull, /* 0.9.2 */ + .domainBlockPullAll = qemuDomainBlockPullAll, /* 0.9.2 */ + .domainBlockPullAbort = qemuDomainBlockPullAbort, /* 0.9.2 */ + .domainGetBlockPullInfo = qemuDomainGetBlockPullInfo, /* 0.9.2 */ }; diff --git a/src/qemu/qemu_monitor.c b/src/qemu/qemu_monitor.c index 26bb814..dee354e 100644 --- a/src/qemu/qemu_monitor.c +++ b/src/qemu/qemu_monitor.c @@ -2376,3 +2376,19 @@ int qemuMonitorScreendump(qemuMonitorPtr mon, ret = qemuMonitorTextScreendump(mon, file); return ret; } + +int qemuMonitorBlockPull(qemuMonitorPtr mon, + const char *path, + virDomainBlockPullInfoPtr info, + int mode) +{ + int ret; + + VIR_DEBUG("mon=%p, path=%p, info=%p, mode=%i", mon, path, info, mode); + + if (mon->json) + ret = qemuMonitorJSONBlockPull(mon, path, info, mode); + else + ret = qemuMonitorTextBlockPull(mon, path, info, mode); + return ret; +} diff --git a/src/qemu/qemu_monitor.h b/src/qemu/qemu_monitor.h index 910865b..6fea700 100644 --- a/src/qemu/qemu_monitor.h +++ b/src/qemu/qemu_monitor.h @@ -441,6 +441,19 @@ int qemuMonitorInjectNMI(qemuMonitorPtr mon); int qemuMonitorScreendump(qemuMonitorPtr mon, const char *file); +typedef enum { + BLOCK_PULL_MODE_ONE = 0, + BLOCK_PULL_MODE_ALL = 1, + BLOCK_PULL_MODE_ABORT = 2, + BLOCK_PULL_MODE_INFO = 3, +} BLOCK_PULL_MODE; + + +int qemuMonitorBlockPull(qemuMonitorPtr mon, + const char *path, + virDomainBlockPullInfoPtr info, + int mode); + /** * When running two dd process and using <> redirection, we need a * shell that will not truncate files. These two strings serve that diff --git a/src/qemu/qemu_monitor_json.c b/src/qemu/qemu_monitor_json.c index 75adf66..38b6e78 100644 --- a/src/qemu/qemu_monitor_json.c +++ b/src/qemu/qemu_monitor_json.c @@ -2641,3 +2641,134 @@ int qemuMonitorJSONScreendump(qemuMonitorPtr mon, virJSONValueFree(reply); return ret; } + +static int qemuMonitorJSONGetBlockPullInfoOne(virJSONValuePtr entry, + const char *device, + virDomainBlockPullInfoPtr info) +{ + const char *this_dev; + + if ((this_dev = virJSONValueObjectGetString(entry, "device")) == NULL) { + qemuReportError(VIR_ERR_INTERNAL_ERROR, "%s", + _("entry was missing 'device'")); + return -1; + } + if (!STREQ(this_dev, device)) + return -1; + + if (virJSONValueObjectGetNumberUlong(entry, "offset", &info->cur) < 0) { + qemuReportError(VIR_ERR_INTERNAL_ERROR, "%s", + _("entry was missing 'offset'")); + return -1; + } + + if (virJSONValueObjectGetNumberUlong(entry, "len", &info->end) < 0) { + qemuReportError(VIR_ERR_INTERNAL_ERROR, "%s", + _("entry was missing 'len'")); + return -1; + } + return 0; +} + +/** qemuMonitorJSONGetBlockPullInfo: + * Parse Block Pull information. + * The reply can be a JSON array of objects or just an object. + */ +static int qemuMonitorJSONGetBlockPullInfo(virJSONValuePtr reply, + const char *device, + virDomainBlockPullInfoPtr info) +{ + virJSONValuePtr data; + int nr_results, i = 0; + + if (!info) + return -1; + + if ((data = virJSONValueObjectGet(reply, "return")) == NULL) { + qemuReportError(VIR_ERR_INTERNAL_ERROR, "%s", + _("reply was missing block_pull progress information")); + return -1; + } + + if (data->type == VIR_JSON_TYPE_OBJECT) { + if (qemuMonitorJSONGetBlockPullInfoOne(data, device, info) != 0) + goto not_found; + else + return 0; + } else if (data->type != VIR_JSON_TYPE_ARRAY) { + qemuReportError(VIR_ERR_INTERNAL_ERROR, "%s", + _("urecognized format of block pull information")); + return -1; + } + + if ((nr_results = virJSONValueArraySize(data)) < 0) { + qemuReportError(VIR_ERR_INTERNAL_ERROR, "%s", + _("unable to determine array size")); + return -1; + } + + for (i = 0; i < nr_results; i++) { + virJSONValuePtr entry = virJSONValueArrayGet(data, i); + if (qemuMonitorJSONGetBlockPullInfoOne(entry, device, info) == 0) + return 0; + } + +not_found: + qemuReportError(VIR_ERR_OPERATION_FAILED, "%s", + _("No associated information for the specified disk")); + return -1; +} + + +int qemuMonitorJSONBlockPull(qemuMonitorPtr mon, + const char *device, + virDomainBlockPullInfoPtr info, + int mode) +{ + int ret = -1; + virJSONValuePtr cmd = NULL; + virJSONValuePtr reply = NULL; + int parse_info = 0; + + if (mode == BLOCK_PULL_MODE_ONE) { + cmd = qemuMonitorJSONMakeCommand("block_stream", "s:device", device, NULL); + parse_info = 1; + } else if (mode == BLOCK_PULL_MODE_ALL) { + cmd = qemuMonitorJSONMakeCommand("block_stream", "s:device", device, + "b:all", 1, NULL); + } else if (mode == BLOCK_PULL_MODE_ABORT) { + cmd = qemuMonitorJSONMakeCommand("block_stream", "s:device", device, + "b:stop", 1, NULL); + } else if (mode == BLOCK_PULL_MODE_INFO) { + cmd = qemuMonitorJSONMakeCommand("query-block-stream", NULL); + parse_info = 1; + } + + if (!cmd) + return -1; + + ret = qemuMonitorJSONCommand(mon, cmd, &reply); + + if (ret == 0 && virJSONValueObjectHasKey(reply, "error")) { + if (qemuMonitorJSONHasError(reply, "DeviceNotActive")) + qemuReportError(VIR_ERR_OPERATION_INVALID, + _("No active operation on device: %s"), device); + else if (qemuMonitorJSONHasError(reply, "DeviceInUse")) + qemuReportError(VIR_ERR_OPERATION_FAILED, + _("Device %s in use"), device); + else if (qemuMonitorJSONHasError(reply, "NotSupported")) + qemuReportError(VIR_ERR_OPERATION_INVALID, + _("Operation is not supported for device: %s"), device); + else + qemuReportError(VIR_ERR_INTERNAL_ERROR, "%s", + _("Unexpected error")); + ret = -1; + } + + if (ret == 0 && parse_info) + ret = qemuMonitorJSONGetBlockPullInfo(reply, device, info); + + virJSONValueFree(cmd); + virJSONValueFree(reply); + return ret; +} diff --git a/src/qemu/qemu_monitor_json.h b/src/qemu/qemu_monitor_json.h index ec79b03..393d8fc 100644 --- a/src/qemu/qemu_monitor_json.h +++ b/src/qemu/qemu_monitor_json.h @@ -217,5 +217,9 @@ int qemuMonitorJSONInjectNMI(qemuMonitorPtr mon); int qemuMonitorJSONScreendump(qemuMonitorPtr mon, const char *file); +int qemuMonitorJSONBlockPull(qemuMonitorPtr mon, + const char *device, + virDomainBlockPullInfoPtr info, + int mode); #endif /* QEMU_MONITOR_JSON_H */ diff --git a/src/qemu/qemu_monitor_text.c b/src/qemu/qemu_monitor_text.c index 3b42e7a..7980b95 100644 --- a/src/qemu/qemu_monitor_text.c +++ b/src/qemu/qemu_monitor_text.c @@ -2748,3 +2748,159 @@ cleanup: VIR_FREE(cmd); return ret; } + +static int qemuMonitorTextParseBlockPullOne(const char *text, + const char *device, + virDomainBlockPullInfoPtr info, + const char **next) +{ + virDomainBlockPullInfo tmp; + char *p; + int mismatch = 0; + + if (next == NULL) + return -1; + *next = NULL; + + /* + * Each active stream will appear on its own line in the following format: + * Streaming device <device>: Completed <cur> of <end> bytes + */ + if ((text = STRSKIP(text, "Streaming device ")) == NULL) + return -EINVAL; + + if (!STREQLEN(text, device, strlen(device))) + mismatch = 1; + + if ((text = strstr(text, ": Completed ")) == NULL) + return -EINVAL; + text += 11; + + if (virStrToLong_ull (text, &p, 10, &tmp.cur)) + return -EINVAL; + text = p; + + if (!STRPREFIX(text, " of ")) + return -EINVAL; + text += 4; + + if (virStrToLong_ull (text, &p, 10, &tmp.end)) + return -EINVAL; + text = p; + + if (!STRPREFIX(text, " bytes")) + return -EINVAL; + + if (mismatch) { + *next = STRSKIP(text, "\n"); + return -EAGAIN; + } + + if (info) { + info->cur = tmp.cur; + info->end = tmp.end; + } + return 0; +} + +static int qemuMonitorTextParseBlockPull(const char *text, + const char *device, + virDomainBlockPullInfoPtr info) +{ + const char *next = NULL; + int ret = 0; + + /* Check error: Device not found */ + if (strstr(text, "Device '") && strstr(text, "' not found")) { + qemuReportError(VIR_ERR_OPERATION_INVALID, "%s", _("Device not found")); + return -1; + } + + /* Check error: Already streaming this device */ + if (strstr(text, "Device '") && strstr(text, "' is in use")) { + qemuReportError(VIR_ERR_OPERATION_FAILED, _("Device %s in use"), + device); + return -1; + } + + /* Check error: Stop non-existent stream */ + if (strstr(text, "has not been activated")) { + qemuReportError(VIR_ERR_OPERATION_INVALID,\ + _("No active operation on device: %s"), device); + return -1; + } + + /* + * Check: No active streams when calling info block_stream + * This is not an error condition, there are just no results to report. + */ + if (strstr(text, "No active stream")) { + return -1; + } + + /* Check for unsupported operation */ + if (strstr(text, "Operation is not supported")) { + qemuReportError(VIR_ERR_OPERATION_INVALID, + _("Operation is not supported for device: %s"), device); + return -1; + } + + /* No output indicates success for BlockPullAll and BlockPullAbort */ + if (STREQ(text, "")) + return 0; + + /* Now try to parse lines of block_stream output */ + do { + ret = qemuMonitorTextParseBlockPullOne(text, device, info, &next); + text = next; + } while (text && ret == -EAGAIN); + + if (ret != 0) { + qemuReportError(VIR_ERR_OPERATION_FAILED, "%s", + _("No associated information for the specified disk")); + ret = -1; + } + return ret; +} + +int qemuMonitorTextBlockPull(qemuMonitorPtr mon, + const char *device, + virDomainBlockPullInfoPtr info, + int mode) +{ + char *cmd = NULL; + char *reply = NULL; + int ret; + + if (mode == BLOCK_PULL_MODE_ONE) + ret = virAsprintf(&cmd, "block_stream %s", device); + else if (mode == BLOCK_PULL_MODE_ALL) + ret = virAsprintf(&cmd, "block_stream -a %s", device); + else if (mode == BLOCK_PULL_MODE_ABORT) + ret = virAsprintf(&cmd, "block_stream -s %s", device); + else if (mode == BLOCK_PULL_MODE_INFO) + ret = virAsprintf(&cmd, "info block_stream"); + else + return -1; + + if (ret < 0) { + virReportOOMError(); + return -1; + } + + ret = 0; + if (qemuMonitorHMPCommand(mon, cmd, &reply) < 0) { + qemuReportError(VIR_ERR_INTERNAL_ERROR, + "%s", _("cannot run monitor command")); + ret = -1; + goto cleanup; + } + + if (qemuMonitorTextParseBlockPull(reply, device, info) != 0) + ret = -1; + +cleanup: + VIR_FREE(cmd); + VIR_FREE(reply); + return ret; +} diff --git a/src/qemu/qemu_monitor_text.h b/src/qemu/qemu_monitor_text.h index 8a69105..4fa5064 100644 --- a/src/qemu/qemu_monitor_text.h +++ b/src/qemu/qemu_monitor_text.h @@ -210,4 +210,9 @@ int qemuMonitorTextInjectNMI(qemuMonitorPtr mon); int qemuMonitorTextScreendump(qemuMonitorPtr mon, const char *file); +int qemuMonitorTextBlockPull(qemuMonitorPtr mon, + const char *device, + virDomainBlockPullInfoPtr info, + int mode); + #endif /* QEMU_MONITOR_TEXT_H */ -- 1.7.3
On Thu, Jun 09, 2011 at 12:10:10PM -0500, Adam Litke wrote:
The virDomainBlockPull* family of commands are enabled by the 'block_stream' and 'info block_stream' qemu monitor commands.
* src/qemu/qemu_driver.c src/qemu/qemu_monitor_text.[ch]: implement disk streaming by using the stream and info stream text monitor commands * src/qemu/qemu_monitor_json.[ch]: implement commands using the qmp monitor
Signed-off-by: Adam Litke <agl@us.ibm.com> --- src/qemu/qemu_driver.c | 108 +++++++++++++++++++++++++++++ src/qemu/qemu_monitor.c | 16 ++++ src/qemu/qemu_monitor.h | 13 ++++ src/qemu/qemu_monitor_json.c | 131 +++++++++++++++++++++++++++++++++++ src/qemu/qemu_monitor_json.h | 4 + src/qemu/qemu_monitor_text.c | 156 ++++++++++++++++++++++++++++++++++++++++++ src/qemu/qemu_monitor_text.h | 5 ++ 7 files changed, 433 insertions(+), 0 deletions(-)
diff --git a/src/qemu/qemu_driver.c b/src/qemu/qemu_driver.c index 80de79a..1cbb151 100644 --- a/src/qemu/qemu_driver.c +++ b/src/qemu/qemu_driver.c @@ -7971,6 +7971,110 @@ cleanup: return ret; }
+static const char * +qemuDiskPathToAlias(virDomainObjPtr vm, const char *path) { + int i; + char *ret = NULL; + + for (i = 0 ; i < vm->def->ndisks ; i++) { + virDomainDiskDefPtr disk = vm->def->disks[i]; + + if (disk->src != NULL && STREQ(disk->src, path)) {
You also rather want to check that disk->type is one of VIR_DOMAIN_DISK_TYPE_BLOCK VIR_DOMAIN_DISK_TYPE_FILE before looking at disk->src
+ if (virAsprintf(&ret, "drive-%s", disk->info.alias) < 0) { + virReportOOMError(); + return NULL; + } + break; + } + } + + if (!ret) { + qemuReportError(VIR_ERR_INVALID_ARG, + "%s", _("No device found for specified path")); + } + return ret; +} + +static int +qemuDomainBlockPullImpl(virDomainPtr dom, const char *path, + virDomainBlockPullInfoPtr info, + int mode) +{ + struct qemud_driver *driver = dom->conn->privateData; + virDomainObjPtr vm = NULL; + qemuDomainObjPrivatePtr priv; + char uuidstr[VIR_UUID_STRING_BUFLEN]; + const char *device = NULL; + int ret = -1; + + qemuDriverLock(driver); + virUUIDFormat(dom->uuid, uuidstr); + vm = virDomainFindByUUID(&driver->domains, dom->uuid); + if (!vm) { + qemuReportError(VIR_ERR_NO_DOMAIN, + _("no domain with matching uuid '%s'"), uuidstr); + goto cleanup; + } + + if (!virDomainObjIsActive(vm)) { + qemuReportError(VIR_ERR_OPERATION_INVALID, + "%s", _("domain is not running")); + goto cleanup; + } + + device = qemuDiskPathToAlias(vm, path); + if (!device) { + goto cleanup; + } + + if (qemuDomainObjBeginJobWithDriver(driver, vm) < 0) + goto cleanup; + qemuDomainObjEnterMonitorWithDriver(driver, vm); + priv = vm->privateData; + ret = qemuMonitorBlockPull(priv->mon, device, info, mode); + qemuDomainObjExitMonitorWithDriver(driver, vm); + if (qemuDomainObjEndJob(vm) == 0) { + vm = NULL; + goto cleanup; + } + +cleanup: + VIR_FREE(device); + if (vm) + virDomainObjUnlock(vm); + qemuDriverUnlock(driver); + return ret; +} + +static int +qemuDomainBlockPull(virDomainPtr dom, const char *path, + virDomainBlockPullInfoPtr info, unsigned int flags) +{ + virCheckFlags(0, -1); + return qemuDomainBlockPullImpl(dom, path, info, BLOCK_PULL_MODE_ONE); +} + +static int +qemuDomainBlockPullAll(virDomainPtr dom, const char *path, unsigned int flags) +{ + virCheckFlags(0, -1); + return qemuDomainBlockPullImpl(dom, path, NULL, BLOCK_PULL_MODE_ALL); +} + +static int +qemuDomainBlockPullAbort(virDomainPtr dom, const char *path, unsigned int flags) +{ + virCheckFlags(0, -1); + return qemuDomainBlockPullImpl(dom, path, NULL, BLOCK_PULL_MODE_ABORT); +} + +static int +qemuDomainGetBlockPullInfo(virDomainPtr dom, const char *path, + virDomainBlockPullInfoPtr info, unsigned int flags) +{ + virCheckFlags(0, -1); + return qemuDomainBlockPullImpl(dom, path, info, BLOCK_PULL_MODE_INFO); +}
static virDriver qemuDriver = { .no = VIR_DRV_QEMU, @@ -8090,6 +8194,10 @@ static virDriver qemuDriver = { .domainMigratePerform3 = qemuDomainMigratePerform3, /* 0.9.2 */ .domainMigrateFinish3 = qemuDomainMigrateFinish3, /* 0.9.2 */ .domainMigrateConfirm3 = qemuDomainMigrateConfirm3, /* 0.9.2 */ + .domainBlockPull = qemuDomainBlockPull, /* 0.9.2 */ + .domainBlockPullAll = qemuDomainBlockPullAll, /* 0.9.2 */ + .domainBlockPullAbort = qemuDomainBlockPullAbort, /* 0.9.2 */ + .domainGetBlockPullInfo = qemuDomainGetBlockPullInfo, /* 0.9.2 */ };
These want to be 0.9.3 ACK to the rest of the patch Daniel -- |: http://berrange.com -o- http://www.flickr.com/photos/dberrange/ :| |: http://libvirt.org -o- http://virt-manager.org :| |: http://autobuild.org -o- http://search.cpan.org/~danberr/ :| |: http://entangle-photo.org -o- http://live.gnome.org/gtk-vnc :|
Define three new virsh commands: * blockpull: Perform incremental block pull * blockpull: Start/stop full device block pull * blockpullinfo: Retrieve progress info for full device block pull Share print_job_progress() with the migration code. * tools/virsh.c: implement the new commands Signed-off-by: Adam Litke <agl@us.ibm.com> --- tools/virsh.c | 134 +++++++++++++++++++++++++++++++++++++++++++++++++++++++-- 1 files changed, 130 insertions(+), 4 deletions(-) diff --git a/tools/virsh.c b/tools/virsh.c index 123781f..81c2e71 100644 --- a/tools/virsh.c +++ b/tools/virsh.c @@ -4095,7 +4095,8 @@ out_sig: } static void -print_job_progress(unsigned long long remaining, unsigned long long total) +print_job_progress(const char *label, unsigned long long remaining, + unsigned long long total) { int progress; @@ -4115,7 +4116,7 @@ print_job_progress(unsigned long long remaining, unsigned long long total) } } - fprintf(stderr, "\rMigration: [%3d %%]", progress); + fprintf(stderr, "\r%s: [%3d %%]", label, progress); } static bool @@ -4202,7 +4203,7 @@ repoll: functionReturn = true; if (verbose) { /* print [100 %] */ - print_job_progress(0, 1); + print_job_progress("Migration", 0, 1); } } else functionReturn = false; @@ -4241,7 +4242,8 @@ repoll: pthread_sigmask(SIG_SETMASK, &oldsigmask, NULL); #endif if (ret == 0) - print_job_progress(jobinfo.dataRemaining, jobinfo.dataTotal); + print_job_progress("Migration", jobinfo.dataRemaining, + jobinfo.dataTotal); } } @@ -4344,6 +4346,127 @@ done: return ret; } +typedef enum { + VSH_CMD_BLOCK_PULL_ONE = 0, + VSH_CMD_BLOCK_PULL_ALL = 1, + VSH_CMD_BLOCK_PULL_ABORT = 2, + VSH_CMD_BLOCK_PULL_INFO = 3 +} VSH_CMD_BLOCK_PULL_MODE; + +static int +blockPullImpl(vshControl *ctl, const vshCmd *cmd, + virDomainBlockPullInfoPtr info, int mode) +{ + virDomainPtr dom; + const char *name, *path; + int ret = -1; + + if (!vshConnectionUsability(ctl, ctl->conn)) + return false; + + if (!(dom = vshCommandOptDomain(ctl, cmd, &name))) + return false; + + if (vshCommandOptString(cmd, "path", &path) < 0) + return false; + + if (mode == VSH_CMD_BLOCK_PULL_ONE) + ret = virDomainBlockPull(dom, path, info, 0); + else if (mode == VSH_CMD_BLOCK_PULL_ALL) + ret = virDomainBlockPullAll(dom, path, 0); + else if (mode == VSH_CMD_BLOCK_PULL_ABORT) + ret = virDomainBlockPullAbort(dom, path, 0); + else if (mode == VSH_CMD_BLOCK_PULL_INFO) + ret = virDomainGetBlockPullInfo(dom, path, info, 0); + + virDomainFree(dom); + return ret; +} + +/* + * "blockpull" command + */ +static const vshCmdInfo info_block_pull[] = { + {"help", N_("Iteratively populate a disk from its backing image.")}, + {"desc", N_("Iteratively populate a disk from its backing image.")}, + {NULL, NULL} +}; + +static const vshCmdOptDef opts_block_pull[] = { + {"domain", VSH_OT_DATA, VSH_OFLAG_REQ, N_("domain name, id or uuid")}, + {"path", VSH_OT_DATA, VSH_OFLAG_REQ, N_("Fully-qualified path of disk")}, + {NULL, 0, 0, NULL} +}; + +static bool +cmdBlockPull(vshControl *ctl, const vshCmd *cmd) +{ + virDomainBlockPullInfo info; + + if (blockPullImpl(ctl, cmd, &info, VSH_CMD_BLOCK_PULL_ONE) != 0) + return false; + print_job_progress("Block pull", info.end - info.cur, info.end); + return true; +} + +/* + * "blockpullall" command + */ +static const vshCmdInfo info_block_pull_all[] = { + {"help", N_("Start or stop populating a disk from its backing image.")}, + {"desc", N_("Start or stop populating a disk from its backing image.")}, + {NULL, NULL} +}; + +static const vshCmdOptDef opts_block_pull_all[] = { + {"domain", VSH_OT_DATA, VSH_OFLAG_REQ, N_("domain name, id or uuid")}, + {"path", VSH_OT_DATA, VSH_OFLAG_REQ, N_("Fully-qualified path of disk")}, + {"abort", VSH_OT_BOOL, VSH_OFLAG_NONE, N_("Abort the current operation")}, + {NULL, 0, 0, NULL} +}; + +static bool +cmdBlockPullAll(vshControl *ctl, const vshCmd *cmd) +{ + int mode; + + if (vshCommandOptBool (cmd, "abort")) + mode = VSH_CMD_BLOCK_PULL_ABORT; + else + mode = VSH_CMD_BLOCK_PULL_ALL; + + if (blockPullImpl(ctl, cmd, NULL, mode) != 0) + return false; + return true; +} + +/* + * "blockpullinfo" command + */ +static const vshCmdInfo info_block_pull_info[] = { + {"help", N_("Check progress of an active block pull operation.")}, + {"desc", N_("Check progress of an active block pull operation.")}, + {NULL, NULL} +}; + +static const vshCmdOptDef opts_block_pull_info[] = { + {"domain", VSH_OT_DATA, VSH_OFLAG_REQ, N_("domain name, id or uuid")}, + {"path", VSH_OT_DATA, VSH_OFLAG_REQ, N_("Fully-qualified path of disk")}, + {NULL, 0, 0, NULL} +}; + +static bool +cmdBlockPullInfo(vshControl *ctl, const vshCmd *cmd) +{ + virDomainBlockPullInfo info; + + if (blockPullImpl(ctl, cmd, &info, VSH_CMD_BLOCK_PULL_INFO) != 0) + return false; + print_job_progress("Block pull", info.end - info.cur, info.end); + return true; +} + + /* * "net-autostart" command */ @@ -11093,6 +11216,9 @@ static const vshCmdDef domManagementCmds[] = { info_attach_interface, 0}, {"autostart", cmdAutostart, opts_autostart, info_autostart, 0}, {"blkiotune", cmdBlkiotune, opts_blkiotune, info_blkiotune, 0}, + {"blockpull", cmdBlockPull, opts_block_pull, info_block_pull, 0}, + {"blockpullall", cmdBlockPullAll, opts_block_pull_all, info_block_pull_all, 0}, + {"blockpullinfo", cmdBlockPullInfo, opts_block_pull_info, info_block_pull_info, 0}, #ifndef WIN32 {"console", cmdConsole, opts_console, info_console, 0}, #endif -- 1.7.3
On Thu, Jun 09, 2011 at 12:10:11PM -0500, Adam Litke wrote:
Define three new virsh commands: * blockpull: Perform incremental block pull * blockpull: Start/stop full device block pull * blockpullinfo: Retrieve progress info for full device block pull
Share print_job_progress() with the migration code.
* tools/virsh.c: implement the new commands
Signed-off-by: Adam Litke <agl@us.ibm.com> --- tools/virsh.c | 134 +++++++++++++++++++++++++++++++++++++++++++++++++++++++-- 1 files changed, 130 insertions(+), 4 deletions(-)
diff --git a/tools/virsh.c b/tools/virsh.c index 123781f..81c2e71 100644 --- a/tools/virsh.c +++ b/tools/virsh.c @@ -4095,7 +4095,8 @@ out_sig: }
static void -print_job_progress(unsigned long long remaining, unsigned long long total) +print_job_progress(const char *label, unsigned long long remaining, + unsigned long long total) { int progress;
@@ -4115,7 +4116,7 @@ print_job_progress(unsigned long long remaining, unsigned long long total) } }
- fprintf(stderr, "\rMigration: [%3d %%]", progress); + fprintf(stderr, "\r%s: [%3d %%]", label, progress); }
static bool @@ -4202,7 +4203,7 @@ repoll: functionReturn = true; if (verbose) { /* print [100 %] */ - print_job_progress(0, 1); + print_job_progress("Migration", 0, 1); } } else functionReturn = false; @@ -4241,7 +4242,8 @@ repoll: pthread_sigmask(SIG_SETMASK, &oldsigmask, NULL); #endif if (ret == 0) - print_job_progress(jobinfo.dataRemaining, jobinfo.dataTotal); + print_job_progress("Migration", jobinfo.dataRemaining, + jobinfo.dataTotal); } }
@@ -4344,6 +4346,127 @@ done: return ret; }
+typedef enum { + VSH_CMD_BLOCK_PULL_ONE = 0, + VSH_CMD_BLOCK_PULL_ALL = 1, + VSH_CMD_BLOCK_PULL_ABORT = 2, + VSH_CMD_BLOCK_PULL_INFO = 3 +} VSH_CMD_BLOCK_PULL_MODE; + +static int +blockPullImpl(vshControl *ctl, const vshCmd *cmd, + virDomainBlockPullInfoPtr info, int mode) +{ + virDomainPtr dom; + const char *name, *path; + int ret = -1; + + if (!vshConnectionUsability(ctl, ctl->conn)) + return false; + + if (!(dom = vshCommandOptDomain(ctl, cmd, &name))) + return false; + + if (vshCommandOptString(cmd, "path", &path) < 0) + return false; + + if (mode == VSH_CMD_BLOCK_PULL_ONE) + ret = virDomainBlockPull(dom, path, info, 0); + else if (mode == VSH_CMD_BLOCK_PULL_ALL) + ret = virDomainBlockPullAll(dom, path, 0); + else if (mode == VSH_CMD_BLOCK_PULL_ABORT) + ret = virDomainBlockPullAbort(dom, path, 0); + else if (mode == VSH_CMD_BLOCK_PULL_INFO) + ret = virDomainGetBlockPullInfo(dom, path, info, 0); + + virDomainFree(dom); + return ret; +} + +/* + * "blockpull" command + */ +static const vshCmdInfo info_block_pull[] = { + {"help", N_("Iteratively populate a disk from its backing image.")}, + {"desc", N_("Iteratively populate a disk from its backing image.")}, + {NULL, NULL} +}; + +static const vshCmdOptDef opts_block_pull[] = { + {"domain", VSH_OT_DATA, VSH_OFLAG_REQ, N_("domain name, id or uuid")}, + {"path", VSH_OT_DATA, VSH_OFLAG_REQ, N_("Fully-qualified path of disk")}, + {NULL, 0, 0, NULL} +}; + +static bool +cmdBlockPull(vshControl *ctl, const vshCmd *cmd) +{ + virDomainBlockPullInfo info; + + if (blockPullImpl(ctl, cmd, &info, VSH_CMD_BLOCK_PULL_ONE) != 0) + return false; + print_job_progress("Block pull", info.end - info.cur, info.end); + return true; +} + +/* + * "blockpullall" command + */ +static const vshCmdInfo info_block_pull_all[] = { + {"help", N_("Start or stop populating a disk from its backing image.")}, + {"desc", N_("Start or stop populating a disk from its backing image.")}, + {NULL, NULL} +}; + +static const vshCmdOptDef opts_block_pull_all[] = { + {"domain", VSH_OT_DATA, VSH_OFLAG_REQ, N_("domain name, id or uuid")}, + {"path", VSH_OT_DATA, VSH_OFLAG_REQ, N_("Fully-qualified path of disk")}, + {"abort", VSH_OT_BOOL, VSH_OFLAG_NONE, N_("Abort the current operation")}, + {NULL, 0, 0, NULL} +}; + +static bool +cmdBlockPullAll(vshControl *ctl, const vshCmd *cmd) +{ + int mode; + + if (vshCommandOptBool (cmd, "abort")) + mode = VSH_CMD_BLOCK_PULL_ABORT; + else + mode = VSH_CMD_BLOCK_PULL_ALL; + + if (blockPullImpl(ctl, cmd, NULL, mode) != 0) + return false; + return true; +}
In constrast to the API, I think it might be worth merging this command with "blockpull", just having a '--all' flag for it.
+/* + * "blockpullinfo" command + */ +static const vshCmdInfo info_block_pull_info[] = { + {"help", N_("Check progress of an active block pull operation.")}, + {"desc", N_("Check progress of an active block pull operation.")}, + {NULL, NULL} +}; + +static const vshCmdOptDef opts_block_pull_info[] = { + {"domain", VSH_OT_DATA, VSH_OFLAG_REQ, N_("domain name, id or uuid")}, + {"path", VSH_OT_DATA, VSH_OFLAG_REQ, N_("Fully-qualified path of disk")}, + {NULL, 0, 0, NULL} +}; + +static bool +cmdBlockPullInfo(vshControl *ctl, const vshCmd *cmd) +{ + virDomainBlockPullInfo info; + + if (blockPullImpl(ctl, cmd, &info, VSH_CMD_BLOCK_PULL_INFO) != 0) + return false; + print_job_progress("Block pull", info.end - info.cur, info.end); + return true; +} + + /* * "net-autostart" command */ @@ -11093,6 +11216,9 @@ static const vshCmdDef domManagementCmds[] = { info_attach_interface, 0}, {"autostart", cmdAutostart, opts_autostart, info_autostart, 0}, {"blkiotune", cmdBlkiotune, opts_blkiotune, info_blkiotune, 0}, + {"blockpull", cmdBlockPull, opts_block_pull, info_block_pull, 0}, + {"blockpullall", cmdBlockPullAll, opts_block_pull_all, info_block_pull_all, 0}, + {"blockpullinfo", cmdBlockPullInfo, opts_block_pull_info, info_block_pull_info, 0}, #ifndef WIN32 {"console", cmdConsole, opts_console, info_console, 0}, #endif
Daniel -- |: http://berrange.com -o- http://www.flickr.com/photos/dberrange/ :| |: http://libvirt.org -o- http://virt-manager.org :| |: http://autobuild.org -o- http://search.cpan.org/~danberr/ :| |: http://entangle-photo.org -o- http://live.gnome.org/gtk-vnc :|
On 06/14/2011 04:59 AM, Daniel P. Berrange wrote:
+static bool +cmdBlockPullAll(vshControl *ctl, const vshCmd *cmd) +{ + int mode; + + if (vshCommandOptBool (cmd, "abort")) + mode = VSH_CMD_BLOCK_PULL_ABORT; + else + mode = VSH_CMD_BLOCK_PULL_ALL; + + if (blockPullImpl(ctl, cmd, NULL, mode) != 0) + return false; + return true; +}
In constrast to the API, I think it might be worth merging this command with "blockpull", just having a '--all' flag for it.
This was an easy change to make. You'll see it in the next posting. I've added the flags '--all' and '--abort' to the blockpull command. Now we have just two virsh commands: blockpull and blockpullinfo. -- Adam Litke IBM Linux Technology Center
virDomainBlockPullAll and virDomainBlockPullAbort are handled automatically. virDomainBlockPull and virDomainBlockPullInfo require manual overrides since they return a custom type. * python/generator.py: reenable bindings for this entry point * python/libvirt-override-api.xml python/libvirt-override.c: manual overrides Signed-off-by: Adam Litke <agl@us.ibm.com> --- python/generator.py | 5 +-- python/libvirt-override-api.xml | 14 ++++++++++ python/libvirt-override.c | 53 +++++++++++++++++++++++++++++++++++++++ 3 files changed, 69 insertions(+), 3 deletions(-) diff --git a/python/generator.py b/python/generator.py index 43e7414..be8419d 100755 --- a/python/generator.py +++ b/python/generator.py @@ -178,8 +178,6 @@ def enum(type, name, value): functions_failed = [] functions_skipped = [ "virConnectListDomains", - 'virDomainBlockPull', - 'virDomainGetBlockPullInfo', ] skipped_modules = { @@ -194,7 +192,6 @@ skipped_types = { 'virConnectDomainEventIOErrorCallback': "No function types in python", 'virConnectDomainEventGraphicsCallback': "No function types in python", 'virEventAddHandleFunc': "No function types in python", - 'virDomainBlockPullInfoPtr': "Not implemented yet", } ####################################################################### @@ -359,6 +356,8 @@ skip_impl = ( 'virNodeDeviceListCaps', 'virConnectBaselineCPU', 'virDomainRevertToSnapshot', + 'virDomainBlockPull', + 'virDomainGetBlockPullInfo', ) diff --git a/python/libvirt-override-api.xml b/python/libvirt-override-api.xml index ec08e69..4bdd5de 100644 --- a/python/libvirt-override-api.xml +++ b/python/libvirt-override-api.xml @@ -314,5 +314,19 @@ <arg name='flags' type='unsigned int' info='flags, curently unused'/> <return type='int' info="0 on success, -1 on error"/> </function> + <function name='virDomainBlockPull' file='python'> + <info>Initiate an incremental BlockPull for the given disk</info> + <arg name='dom' type='virDomainPtr' info='pointer to the domain'/> + <arg name='path' type='const char *' info='Fully-qualified filename of disk'/> + <arg name='flags' type='unsigned int' info='fine-tuning flags, currently unused, pass 0.'/> + <return type='virDomainBlockPullInfo' info='A dictionary containing progress information.' /> + </function> + <function name='virDomainGetBlockPullInfo' file='python'> + <info>Get progress information for a background BlockPull operation</info> + <arg name='dom' type='virDomainPtr' info='pointer to the domain'/> + <arg name='path' type='const char *' info='Fully-qualified filename of disk'/> + <arg name='flags' type='unsigned int' info='fine-tuning flags, currently unused, pass 0.'/> + <return type='virDomainBlockPullInfo' info='A dictionary containing progress information.' /> + </function> </symbols> </api> diff --git a/python/libvirt-override.c b/python/libvirt-override.c index 974decb..cbdbc54 100644 --- a/python/libvirt-override.c +++ b/python/libvirt-override.c @@ -2382,6 +2382,57 @@ libvirt_virDomainGetJobInfo(PyObject *self ATTRIBUTE_UNUSED, PyObject *args) { return(py_retval); } +static PyObject * +libvirt_virDomainBlockPullImpl(PyObject *self ATTRIBUTE_UNUSED, + PyObject *args, int infoOnly) { + virDomainPtr domain; + PyObject *pyobj_domain; + const char *path; + unsigned int flags; + virDomainBlockPullInfo info; + int c_ret; + PyObject *ret; + + if (!PyArg_ParseTuple(args, (char *)"Ozi:virDomainStreamDiskInfo", + &pyobj_domain, &path, &flags)) + return(NULL); + domain = (virDomainPtr) PyvirDomain_Get(pyobj_domain); + +LIBVIRT_BEGIN_ALLOW_THREADS; + if (infoOnly) + c_ret = virDomainGetBlockPullInfo(domain, path, &info, flags); + else + c_ret = virDomainBlockPull(domain, path, &info, flags); +LIBVIRT_END_ALLOW_THREADS; + + if (c_ret == -1) + return VIR_PY_NONE; + + if ((ret = PyDict_New()) == NULL) + return VIR_PY_NONE; + + PyDict_SetItem(ret, libvirt_constcharPtrWrap("cur"), + libvirt_ulonglongWrap(info.cur)); + PyDict_SetItem(ret, libvirt_constcharPtrWrap("end"), + libvirt_ulonglongWrap(info.end)); + + return ret; +} + +static PyObject * +libvirt_virDomainBlockPull(PyObject *self ATTRIBUTE_UNUSED, + PyObject *args) +{ + return libvirt_virDomainBlockPullImpl(self, args, 0); +} + +static PyObject * +libvirt_virDomainGetBlockPullInfo(PyObject *self ATTRIBUTE_UNUSED, + PyObject *args) +{ + return libvirt_virDomainBlockPullImpl(self, args, 1); +} + /******************************************* * Helper functions to avoid importing modules @@ -3613,6 +3664,8 @@ static PyMethodDef libvirtMethods[] = { {(char *) "virDomainGetJobInfo", libvirt_virDomainGetJobInfo, METH_VARARGS, NULL}, {(char *) "virDomainSnapshotListNames", libvirt_virDomainSnapshotListNames, METH_VARARGS, NULL}, {(char *) "virDomainRevertToSnapshot", libvirt_virDomainRevertToSnapshot, METH_VARARGS, NULL}, + {(char *) "virDomainBlockPull", libvirt_virDomainBlockPull, METH_VARARGS, NULL}, + {(char *) "virDomainGetBlockPullInfo", libvirt_virDomainGetBlockPullInfo, METH_VARARGS, NULL}, {NULL, NULL, 0, NULL} }; -- 1.7.3
On Thu, Jun 09, 2011 at 12:10:12PM -0500, Adam Litke wrote:
virDomainBlockPullAll and virDomainBlockPullAbort are handled automatically. virDomainBlockPull and virDomainBlockPullInfo require manual overrides since they return a custom type.
* python/generator.py: reenable bindings for this entry point * python/libvirt-override-api.xml python/libvirt-override.c: manual overrides
Signed-off-by: Adam Litke <agl@us.ibm.com> --- python/generator.py | 5 +-- python/libvirt-override-api.xml | 14 ++++++++++ python/libvirt-override.c | 53 +++++++++++++++++++++++++++++++++++++++ 3 files changed, 69 insertions(+), 3 deletions(-)
diff --git a/python/generator.py b/python/generator.py index 43e7414..be8419d 100755 --- a/python/generator.py +++ b/python/generator.py @@ -178,8 +178,6 @@ def enum(type, name, value): functions_failed = [] functions_skipped = [ "virConnectListDomains", - 'virDomainBlockPull', - 'virDomainGetBlockPullInfo', ]
skipped_modules = { @@ -194,7 +192,6 @@ skipped_types = { 'virConnectDomainEventIOErrorCallback': "No function types in python", 'virConnectDomainEventGraphicsCallback': "No function types in python", 'virEventAddHandleFunc': "No function types in python", - 'virDomainBlockPullInfoPtr': "Not implemented yet", }
####################################################################### @@ -359,6 +356,8 @@ skip_impl = ( 'virNodeDeviceListCaps', 'virConnectBaselineCPU', 'virDomainRevertToSnapshot', + 'virDomainBlockPull', + 'virDomainGetBlockPullInfo', )
diff --git a/python/libvirt-override-api.xml b/python/libvirt-override-api.xml index ec08e69..4bdd5de 100644 --- a/python/libvirt-override-api.xml +++ b/python/libvirt-override-api.xml @@ -314,5 +314,19 @@ <arg name='flags' type='unsigned int' info='flags, curently unused'/> <return type='int' info="0 on success, -1 on error"/> </function> + <function name='virDomainBlockPull' file='python'> + <info>Initiate an incremental BlockPull for the given disk</info> + <arg name='dom' type='virDomainPtr' info='pointer to the domain'/> + <arg name='path' type='const char *' info='Fully-qualified filename of disk'/> + <arg name='flags' type='unsigned int' info='fine-tuning flags, currently unused, pass 0.'/> + <return type='virDomainBlockPullInfo' info='A dictionary containing progress information.' /> + </function> + <function name='virDomainGetBlockPullInfo' file='python'> + <info>Get progress information for a background BlockPull operation</info> + <arg name='dom' type='virDomainPtr' info='pointer to the domain'/> + <arg name='path' type='const char *' info='Fully-qualified filename of disk'/> + <arg name='flags' type='unsigned int' info='fine-tuning flags, currently unused, pass 0.'/> + <return type='virDomainBlockPullInfo' info='A dictionary containing progress information.' /> + </function> </symbols> </api> diff --git a/python/libvirt-override.c b/python/libvirt-override.c index 974decb..cbdbc54 100644 --- a/python/libvirt-override.c +++ b/python/libvirt-override.c @@ -2382,6 +2382,57 @@ libvirt_virDomainGetJobInfo(PyObject *self ATTRIBUTE_UNUSED, PyObject *args) { return(py_retval); }
+static PyObject * +libvirt_virDomainBlockPullImpl(PyObject *self ATTRIBUTE_UNUSED, + PyObject *args, int infoOnly) { + virDomainPtr domain; + PyObject *pyobj_domain; + const char *path; + unsigned int flags; + virDomainBlockPullInfo info; + int c_ret; + PyObject *ret; + + if (!PyArg_ParseTuple(args, (char *)"Ozi:virDomainStreamDiskInfo", + &pyobj_domain, &path, &flags)) + return(NULL); + domain = (virDomainPtr) PyvirDomain_Get(pyobj_domain); + +LIBVIRT_BEGIN_ALLOW_THREADS; + if (infoOnly) + c_ret = virDomainGetBlockPullInfo(domain, path, &info, flags); + else + c_ret = virDomainBlockPull(domain, path, &info, flags); +LIBVIRT_END_ALLOW_THREADS; + + if (c_ret == -1) + return VIR_PY_NONE; + + if ((ret = PyDict_New()) == NULL) + return VIR_PY_NONE; + + PyDict_SetItem(ret, libvirt_constcharPtrWrap("cur"), + libvirt_ulonglongWrap(info.cur)); + PyDict_SetItem(ret, libvirt_constcharPtrWrap("end"), + libvirt_ulonglongWrap(info.end)); + + return ret; +} + +static PyObject * +libvirt_virDomainBlockPull(PyObject *self ATTRIBUTE_UNUSED, + PyObject *args) +{ + return libvirt_virDomainBlockPullImpl(self, args, 0); +} + +static PyObject * +libvirt_virDomainGetBlockPullInfo(PyObject *self ATTRIBUTE_UNUSED, + PyObject *args) +{ + return libvirt_virDomainBlockPullImpl(self, args, 1); +} +
/******************************************* * Helper functions to avoid importing modules @@ -3613,6 +3664,8 @@ static PyMethodDef libvirtMethods[] = { {(char *) "virDomainGetJobInfo", libvirt_virDomainGetJobInfo, METH_VARARGS, NULL}, {(char *) "virDomainSnapshotListNames", libvirt_virDomainSnapshotListNames, METH_VARARGS, NULL}, {(char *) "virDomainRevertToSnapshot", libvirt_virDomainRevertToSnapshot, METH_VARARGS, NULL}, + {(char *) "virDomainBlockPull", libvirt_virDomainBlockPull, METH_VARARGS, NULL}, + {(char *) "virDomainGetBlockPullInfo", libvirt_virDomainGetBlockPullInfo, METH_VARARGS, NULL}, {NULL, NULL, 0, NULL} };
ACK Daniel -- |: http://berrange.com -o- http://www.flickr.com/photos/dberrange/ :| |: http://libvirt.org -o- http://virt-manager.org :| |: http://autobuild.org -o- http://search.cpan.org/~danberr/ :| |: http://entangle-photo.org -o- http://live.gnome.org/gtk-vnc :|
When an operation started by virDomainBlockPullAll completes (either with success or with failure), raise an event to indicate the final status. This allows an API user to avoid polling on virDomainBlockPullInfo if they would prefer to use the event mechanism. * daemon/remote.c: Dispatch events to client * include/libvirt/libvirt.h.in: Define event ID and callback signature * src/conf/domain_event.c, src/conf/domain_event.h, src/libvirt_private.syms: Extend API to handle the new event * src/qemu/qemu_driver.c: Connect to the QEMU monitor event for block_stream completion and emit a libvirt block pull event * src/remote/remote_driver.c: Receive and dispatch events to application * src/remote/remote_protocol.x: Wire protocol definition for the event * src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h, src/qemu/qemu_monitor_json.c: Watch for BLOCK_STREAM_COMPLETED event from QEMU monitor Signed-off-by: Adam Litke <agl@us.ibm.com> --- daemon/remote.c | 32 ++++++++++++++++++++ include/libvirt/libvirt.h.in | 27 +++++++++++++++++ python/libvirt-override-virConnect.py | 12 ++++++++ python/libvirt-override.c | 51 +++++++++++++++++++++++++++++++++ src/conf/domain_event.c | 50 ++++++++++++++++++++++++++++++++ src/conf/domain_event.h | 7 ++++- src/libvirt_private.syms | 2 + src/qemu/qemu_monitor.c | 12 ++++++++ src/qemu/qemu_monitor.h | 8 +++++ src/qemu/qemu_monitor_json.c | 30 +++++++++++++++++++ src/qemu/qemu_process.c | 28 ++++++++++++++++++ src/remote/remote_driver.c | 30 +++++++++++++++++++ src/remote/remote_protocol.x | 9 +++++- src/remote_protocol-structs | 5 +++ 14 files changed, 301 insertions(+), 2 deletions(-) diff --git a/daemon/remote.c b/daemon/remote.c index e0b681c..a8ac276 100644 --- a/daemon/remote.c +++ b/daemon/remote.c @@ -396,6 +396,37 @@ static int remoteRelayDomainEventGraphics(virConnectPtr conn ATTRIBUTE_UNUSED, return 0; } +static int remoteRelayDomainEventBlockPull(virConnectPtr conn ATTRIBUTE_UNUSED, + virDomainPtr dom, + const char *path, + int status, + void *opaque) +{ + struct qemud_client *client = opaque; + remote_domain_event_block_pull_msg data; + + if (!client) + return -1; + + VIR_DEBUG("Relaying domain block pull event %s %d %s %i", dom->name, dom->id, path, status); + + virMutexLock(&client->lock); + + /* build return data */ + memset(&data, 0, sizeof data); + make_nonnull_domain(&data.dom, dom); + data.path = (char*)path; + data.status = status; + + remoteDispatchDomainEventSend(client, + REMOTE_PROC_DOMAIN_EVENT_BLOCK_PULL, + (xdrproc_t)xdr_remote_domain_event_block_pull_msg, &data); + + virMutexUnlock(&client->lock); + + return 0; +} + static int remoteRelayDomainEventControlError(virConnectPtr conn ATTRIBUTE_UNUSED, virDomainPtr dom, @@ -434,6 +465,7 @@ static virConnectDomainEventGenericCallback domainEventCallbacks[] = { VIR_DOMAIN_EVENT_CALLBACK(remoteRelayDomainEventGraphics), VIR_DOMAIN_EVENT_CALLBACK(remoteRelayDomainEventIOErrorReason), VIR_DOMAIN_EVENT_CALLBACK(remoteRelayDomainEventControlError), + VIR_DOMAIN_EVENT_CALLBACK(remoteRelayDomainEventBlockPull), }; verify(ARRAY_CARDINALITY(domainEventCallbacks) == VIR_DOMAIN_EVENT_ID_LAST); diff --git a/include/libvirt/libvirt.h.in b/include/libvirt/libvirt.h.in index ba547c1..86b6d69 100644 --- a/include/libvirt/libvirt.h.in +++ b/include/libvirt/libvirt.h.in @@ -2470,6 +2470,32 @@ typedef void (*virConnectDomainEventGraphicsCallback)(virConnectPtr conn, void *opaque); /** + * virConnectDomainEventBlockPullStatus: + * + * The final status of a virDomainBlockPullAll() operation + */ +typedef enum { + VIR_DOMAIN_BLOCK_PULL_COMPLETED = 0, + VIR_DOMAIN_BLOCK_PULL_FAILED = 1, +} virConnectDomainEventBlockPullStatus; + +/** + * virConnectDomainEventBlockPullCallback: + * @conn: connection object + * @dom: domain on which the event occurred + * @path: fully-qualified filename of the affected disk + * @status: final status of the operation (virConnectDomainEventBlockPullStatus) + * + * The callback signature to use when registering for an event of type + * VIR_DOMAIN_EVENT_ID_BLOCK_PULL with virConnectDomainEventRegisterAny() + */ +typedef void (*virConnectDomainEventBlockPullCallback)(virConnectPtr conn, + virDomainPtr dom, + const char *path, + int status, + void *opaque); + +/** * VIR_DOMAIN_EVENT_CALLBACK: * * Used to cast the event specific callback into the generic one @@ -2487,6 +2513,7 @@ typedef enum { VIR_DOMAIN_EVENT_ID_GRAPHICS = 5, /* virConnectDomainEventGraphicsCallback */ VIR_DOMAIN_EVENT_ID_IO_ERROR_REASON = 6, /* virConnectDomainEventIOErrorReasonCallback */ VIR_DOMAIN_EVENT_ID_CONTROL_ERROR = 7, /* virConnectDomainEventGenericCallback */ + VIR_DOMAIN_EVENT_ID_BLOCK_PULL = 8, /* virConnectDomainEventBlockPullCallback */ /* * NB: this enum value will increase over time as new events are diff --git a/python/libvirt-override-virConnect.py b/python/libvirt-override-virConnect.py index e344303..362be75 100644 --- a/python/libvirt-override-virConnect.py +++ b/python/libvirt-override-virConnect.py @@ -124,6 +124,18 @@ except AttributeError: pass + def dispatchDomainEventBlockPullCallback(self, dom, path, status, cbData): + """Dispatches events to python user domain blockPull event callbacks + """ + try: + cb = cbData["cb"] + opaque = cbData["opaque"] + + cb(self, virDomain(self, _obj=dom), path, status, opaque) + return 0 + except AttributeError: + pass + def domainEventDeregisterAny(self, callbackID): """Removes a Domain Event Callback. De-registering for a domain callback will disable delivery of this event type """ diff --git a/python/libvirt-override.c b/python/libvirt-override.c index cbdbc54..61d5b7d 100644 --- a/python/libvirt-override.c +++ b/python/libvirt-override.c @@ -3476,6 +3476,54 @@ libvirt_virConnectDomainEventGraphicsCallback(virConnectPtr conn ATTRIBUTE_UNUSE return ret; } +static int +libvirt_virConnectDomainEventBlockPullCallback(virConnectPtr conn ATTRIBUTE_UNUSED, + virDomainPtr dom, + const char *path, + int status, + void *opaque) +{ + PyObject *pyobj_cbData = (PyObject*)opaque; + PyObject *pyobj_dom; + PyObject *pyobj_ret; + PyObject *pyobj_conn; + PyObject *dictKey; + int ret = -1; + + LIBVIRT_ENSURE_THREAD_STATE; + + /* Create a python instance of this virDomainPtr */ + virDomainRef(dom); + pyobj_dom = libvirt_virDomainPtrWrap(dom); + Py_INCREF(pyobj_cbData); + + dictKey = libvirt_constcharPtrWrap("conn"); + pyobj_conn = PyDict_GetItem(pyobj_cbData, dictKey); + Py_DECREF(dictKey); + + /* Call the Callback Dispatcher */ + pyobj_ret = PyObject_CallMethod(pyobj_conn, + (char*)"dispatchDomainEventBlockPullCallback", + (char*)"OsiO", + pyobj_dom, path, status, pyobj_cbData); + + Py_DECREF(pyobj_cbData); + Py_DECREF(pyobj_dom); + + if(!pyobj_ret) { +#if DEBUG_ERROR + printf("%s - ret:%p\n", __FUNCTION__, pyobj_ret); +#endif + PyErr_Print(); + } else { + Py_DECREF(pyobj_ret); + ret = 0; + } + + LIBVIRT_RELEASE_THREAD_STATE; + return ret; +} + static PyObject * libvirt_virConnectDomainEventRegisterAny(ATTRIBUTE_UNUSED PyObject * self, PyObject * args) @@ -3534,6 +3582,9 @@ libvirt_virConnectDomainEventRegisterAny(ATTRIBUTE_UNUSED PyObject * self, case VIR_DOMAIN_EVENT_ID_CONTROL_ERROR: cb = VIR_DOMAIN_EVENT_CALLBACK(libvirt_virConnectDomainEventGenericCallback); break; + case VIR_DOMAIN_EVENT_ID_BLOCK_PULL: + cb = VIR_DOMAIN_EVENT_CALLBACK(libvirt_virConnectDomainEventBlockPullCallback); + break; } if (!cb) { diff --git a/src/conf/domain_event.c b/src/conf/domain_event.c index fabc1a5..90c2b32 100644 --- a/src/conf/domain_event.c +++ b/src/conf/domain_event.c @@ -84,6 +84,10 @@ struct _virDomainEvent { char *authScheme; virDomainEventGraphicsSubjectPtr subject; } graphics; + struct { + char *path; + int status; + } blockPull; } data; }; @@ -500,6 +504,11 @@ void virDomainEventFree(virDomainEventPtr event) } VIR_FREE(event->data.graphics.subject); } + break; + + case VIR_DOMAIN_EVENT_ID_BLOCK_PULL: + VIR_FREE(event->data.blockPull.path); + break; } VIR_FREE(event->dom.name); @@ -875,6 +884,40 @@ virDomainEventPtr virDomainEventGraphicsNewFromObj(virDomainObjPtr obj, return ev; } +static virDomainEventPtr +virDomainEventBlockPullNew(int id, const char *name, unsigned char *uuid, + const char *path, int status) +{ + virDomainEventPtr ev = + virDomainEventNewInternal(VIR_DOMAIN_EVENT_ID_BLOCK_PULL, + id, name, uuid); + + if (ev) { + if (!(ev->data.blockPull.path = strdup(path))) { + virDomainEventFree(ev); + return NULL; + } + ev->data.blockPull.status = status; + } + + return ev; +} + +virDomainEventPtr virDomainEventBlockPullNewFromObj(virDomainObjPtr obj, + const char *path, + int status) +{ + return virDomainEventBlockPullNew(obj->def->id, obj->def->name, + obj->def->uuid, path, status); +} + +virDomainEventPtr virDomainEventBlockPullNewFromDom(virDomainPtr dom, + const char *path, + int status) +{ + return virDomainEventBlockPullNew(dom->id, dom->name, dom->uuid, + path, status); +} virDomainEventPtr virDomainEventControlErrorNewFromDom(virDomainPtr dom) { @@ -1028,6 +1071,13 @@ void virDomainEventDispatchDefaultFunc(virConnectPtr conn, cbopaque); break; + case VIR_DOMAIN_EVENT_ID_BLOCK_PULL: + ((virConnectDomainEventBlockPullCallback)cb)(conn, dom, + event->data.blockPull.path, + event->data.blockPull.status, + cbopaque); + break; + default: VIR_WARN("Unexpected event ID %d", event->eventID); break; diff --git a/src/conf/domain_event.h b/src/conf/domain_event.h index 68dc8a8..a80868b 100644 --- a/src/conf/domain_event.h +++ b/src/conf/domain_event.h @@ -170,7 +170,12 @@ virDomainEventPtr virDomainEventGraphicsNewFromObj(virDomainObjPtr obj, virDomainEventPtr virDomainEventControlErrorNewFromDom(virDomainPtr dom); virDomainEventPtr virDomainEventControlErrorNewFromObj(virDomainObjPtr obj); - +virDomainEventPtr virDomainEventBlockPullNewFromObj(virDomainObjPtr obj, + const char *path, + int status); +virDomainEventPtr virDomainEventBlockPullNewFromDom(virDomainPtr dom, + const char *path, + int status); int virDomainEventQueuePush(virDomainEventQueuePtr evtQueue, virDomainEventPtr event); diff --git a/src/libvirt_private.syms b/src/libvirt_private.syms index 9d4e163..514d5ab 100644 --- a/src/libvirt_private.syms +++ b/src/libvirt_private.syms @@ -375,6 +375,8 @@ virDomainWatchdogModelTypeToString; # domain_event.h +virDomainEventBlockPullNewFromObj; +virDomainEventBlockPullNewFromDom; virDomainEventCallbackListAdd; virDomainEventCallbackListAddID; virDomainEventCallbackListCount; diff --git a/src/qemu/qemu_monitor.c b/src/qemu/qemu_monitor.c index dee354e..517a2bb 100644 --- a/src/qemu/qemu_monitor.c +++ b/src/qemu/qemu_monitor.c @@ -956,6 +956,18 @@ int qemuMonitorEmitGraphics(qemuMonitorPtr mon, return ret; } +int qemuMonitorEmitBlockPull(qemuMonitorPtr mon, + const char *diskAlias, + int status) +{ + int ret = -1; + VIR_DEBUG("mon=%p", mon); + + QEMU_MONITOR_CALLBACK(mon, ret, domainBlockPull, mon->vm, + diskAlias, status); + return ret; +} + int qemuMonitorSetCapabilities(qemuMonitorPtr mon) diff --git a/src/qemu/qemu_monitor.h b/src/qemu/qemu_monitor.h index 6fea700..3bb0269 100644 --- a/src/qemu/qemu_monitor.h +++ b/src/qemu/qemu_monitor.h @@ -117,6 +117,10 @@ struct _qemuMonitorCallbacks { const char *authScheme, const char *x509dname, const char *saslUsername); + int (*domainBlockPull)(qemuMonitorPtr mon, + virDomainObjPtr vm, + const char *diskAlias, + int status); }; @@ -179,6 +183,10 @@ int qemuMonitorEmitGraphics(qemuMonitorPtr mon, const char *authScheme, const char *x509dname, const char *saslUsername); +int qemuMonitorEmitBlockPull(qemuMonitorPtr mon, + const char *diskAlias, + int status); + int qemuMonitorStartCPUs(qemuMonitorPtr mon, diff --git a/src/qemu/qemu_monitor_json.c b/src/qemu/qemu_monitor_json.c index 38b6e78..fd89f20 100644 --- a/src/qemu/qemu_monitor_json.c +++ b/src/qemu/qemu_monitor_json.c @@ -56,6 +56,7 @@ static void qemuMonitorJSONHandleIOError(qemuMonitorPtr mon, virJSONValuePtr dat static void qemuMonitorJSONHandleVNCConnect(qemuMonitorPtr mon, virJSONValuePtr data); static void qemuMonitorJSONHandleVNCInitialize(qemuMonitorPtr mon, virJSONValuePtr data); static void qemuMonitorJSONHandleVNCDisconnect(qemuMonitorPtr mon, virJSONValuePtr data); +static void qemuMonitorJSONHandleBlockPull(qemuMonitorPtr mon, virJSONValuePtr data); struct { const char *type; @@ -71,6 +72,7 @@ struct { { "VNC_CONNECTED", qemuMonitorJSONHandleVNCConnect, }, { "VNC_INITIALIZED", qemuMonitorJSONHandleVNCInitialize, }, { "VNC_DISCONNECTED", qemuMonitorJSONHandleVNCDisconnect, }, + { "BLOCK_STREAM_COMPLETED", qemuMonitorJSONHandleBlockPull, }, }; @@ -679,6 +681,34 @@ static void qemuMonitorJSONHandleVNCDisconnect(qemuMonitorPtr mon, virJSONValueP qemuMonitorJSONHandleVNC(mon, data, VIR_DOMAIN_EVENT_GRAPHICS_DISCONNECT); } +static void qemuMonitorJSONHandleBlockPull(qemuMonitorPtr mon, virJSONValuePtr data) +{ + const char *device; + unsigned long long offset, len; + int status = VIR_DOMAIN_BLOCK_PULL_FAILED; + + if ((device = virJSONValueObjectGetString(data, "device")) == NULL) { + VIR_WARN("missing device in disk io error event"); + goto out; + } + + if (virJSONValueObjectGetNumberUlong(data, "offset", &offset) < 0) { + VIR_WARN("missing offset in block pull event"); + goto out; + } + + if (virJSONValueObjectGetNumberUlong(data, "len", &len) < 0) { + VIR_WARN("missing len in block pull event"); + goto out; + } + + if (offset != 0 && offset == len) + status = VIR_DOMAIN_BLOCK_PULL_COMPLETED; + +out: + qemuMonitorEmitBlockPull(mon, device, status); +} + int qemuMonitorJSONHumanCommandWithFd(qemuMonitorPtr mon, diff --git a/src/qemu/qemu_process.c b/src/qemu/qemu_process.c index 1efe024..a291fd8 100644 --- a/src/qemu/qemu_process.c +++ b/src/qemu/qemu_process.c @@ -561,6 +561,33 @@ qemuProcessHandleIOError(qemuMonitorPtr mon ATTRIBUTE_UNUSED, return 0; } +static int +qemuProcessHandleBlockPull(qemuMonitorPtr mon ATTRIBUTE_UNUSED, + virDomainObjPtr vm, + const char *diskAlias, + int status) +{ + struct qemud_driver *driver = qemu_driver; + virDomainEventPtr blockPullEvent = NULL; + const char *path; + virDomainDiskDefPtr disk; + + virDomainObjLock(vm); + disk = qemuProcessFindDomainDiskByAlias(vm, diskAlias); + + if (disk) + path = disk->src; + else + path = ""; + blockPullEvent = virDomainEventBlockPullNewFromObj(vm, path, status); + + virDomainObjUnlock(vm); + qemuDriverLock(driver); + qemuDomainEventQueue(driver, blockPullEvent); + qemuDriverUnlock(driver); + + return 0; +} static int qemuProcessHandleGraphics(qemuMonitorPtr mon ATTRIBUTE_UNUSED, @@ -678,6 +705,7 @@ static qemuMonitorCallbacks monitorCallbacks = { .domainWatchdog = qemuProcessHandleWatchdog, .domainIOError = qemuProcessHandleIOError, .domainGraphics = qemuProcessHandleGraphics, + .domainBlockPull = qemuProcessHandleBlockPull, }; static int diff --git a/src/remote/remote_driver.c b/src/remote/remote_driver.c index de9359d..4ae507f 100644 --- a/src/remote/remote_driver.c +++ b/src/remote/remote_driver.c @@ -3727,6 +3727,32 @@ remoteDomainReadEventIOErrorReason(virConnectPtr conn, XDR *xdr) return event; } +static virDomainEventPtr +remoteDomainReadEventBlockPull(virConnectPtr conn, XDR *xdr) +{ + remote_domain_event_block_pull_msg msg; + virDomainPtr dom; + virDomainEventPtr event = NULL; + memset (&msg, 0, sizeof msg); + + /* unmarshall parameters, and process it*/ + if (! xdr_remote_domain_event_block_pull_msg(xdr, &msg) ) { + remoteError(VIR_ERR_RPC, "%s", + _("unable to demarshall block_pull event")); + return NULL; + } + + dom = get_nonnull_domain(conn,msg.dom); + if (!dom) + return NULL; + + event = virDomainEventBlockPullNewFromDom(dom, msg.path, msg.status); + xdr_free ((xdrproc_t) &xdr_remote_domain_event_block_pull_msg, (char *) &msg); + + virDomainFree(dom); + return event; +} + static virDomainEventPtr remoteDomainReadEventGraphics(virConnectPtr conn, XDR *xdr) @@ -5451,6 +5477,10 @@ processCallDispatchMessage(virConnectPtr conn, struct private_data *priv, event = remoteDomainReadEventControlError(conn, xdr); break; + case REMOTE_PROC_DOMAIN_EVENT_BLOCK_PULL: + event = remoteDomainReadEventBlockPull(conn, xdr); + break; + default: VIR_DEBUG("Unexpected event proc %d", hdr->proc); break; diff --git a/src/remote/remote_protocol.x b/src/remote/remote_protocol.x index 33669c2..447687e 100644 --- a/src/remote/remote_protocol.x +++ b/src/remote/remote_protocol.x @@ -1865,6 +1865,12 @@ struct remote_domain_event_graphics_msg { remote_domain_event_graphics_identity subject<REMOTE_DOMAIN_EVENT_GRAPHICS_IDENTITY_MAX>; }; +struct remote_domain_event_block_pull_msg { + remote_nonnull_domain dom; + remote_nonnull_string path; + int status; +}; + struct remote_domain_managed_save_args { remote_nonnull_domain dom; unsigned int flags; @@ -2335,7 +2341,8 @@ enum remote_procedure { REMOTE_PROC_DOMAIN_BLOCK_PULL = 225, /* skipgen skipgen */ REMOTE_PROC_DOMAIN_BLOCK_PULL_ALL = 226, /* autogen autogen */ REMOTE_PROC_DOMAIN_BLOCK_PULL_ABORT = 227, /* autogen autogen */ - REMOTE_PROC_DOMAIN_GET_BLOCK_PULL_INFO = 228 /* skipgen skipgen */ + REMOTE_PROC_DOMAIN_GET_BLOCK_PULL_INFO = 228, /* skipgen skipgen */ + REMOTE_PROC_DOMAIN_EVENT_BLOCK_PULL = 229 /* skipgen skipgen */ /* * Notice how the entries are grouped in sets of 10 ? diff --git a/src/remote_protocol-structs b/src/remote_protocol-structs index 547f6e2..8e5e8d0 100644 --- a/src/remote_protocol-structs +++ b/src/remote_protocol-structs @@ -1370,6 +1370,11 @@ struct remote_domain_event_graphics_msg { remote_domain_event_graphics_identity * subject_val; } subject; }; +struct remote_domain_event_block_pull_msg { + remote_nonnull_domain dom; + remote_nonnull_string path; + int status; +}; struct remote_domain_managed_save_args { remote_nonnull_domain dom; u_int flags; -- 1.7.3
On Thu, Jun 09, 2011 at 12:10:13PM -0500, Adam Litke wrote:
When an operation started by virDomainBlockPullAll completes (either with success or with failure), raise an event to indicate the final status. This allows an API user to avoid polling on virDomainBlockPullInfo if they would prefer to use the event mechanism.
* daemon/remote.c: Dispatch events to client * include/libvirt/libvirt.h.in: Define event ID and callback signature * src/conf/domain_event.c, src/conf/domain_event.h, src/libvirt_private.syms: Extend API to handle the new event * src/qemu/qemu_driver.c: Connect to the QEMU monitor event for block_stream completion and emit a libvirt block pull event * src/remote/remote_driver.c: Receive and dispatch events to application * src/remote/remote_protocol.x: Wire protocol definition for the event * src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h, src/qemu/qemu_monitor_json.c: Watch for BLOCK_STREAM_COMPLETED event from QEMU monitor
Signed-off-by: Adam Litke <agl@us.ibm.com>
diff --git a/src/conf/domain_event.c b/src/conf/domain_event.c index fabc1a5..90c2b32 100644 --- a/src/conf/domain_event.c +++ b/src/conf/domain_event.c @@ -84,6 +84,10 @@ struct _virDomainEvent { char *authScheme; virDomainEventGraphicsSubjectPtr subject; } graphics; + struct { + char *path; + int status; + } blockPull; } data; };
@@ -500,6 +504,11 @@ void virDomainEventFree(virDomainEventPtr event) } VIR_FREE(event->data.graphics.subject); } + break; + + case VIR_DOMAIN_EVENT_ID_BLOCK_PULL: + VIR_FREE(event->data.blockPull.path); + break; }
VIR_FREE(event->dom.name); @@ -875,6 +884,40 @@ virDomainEventPtr virDomainEventGraphicsNewFromObj(virDomainObjPtr obj, return ev; }
+static virDomainEventPtr +virDomainEventBlockPullNew(int id, const char *name, unsigned char *uuid, + const char *path, int status) +{ + virDomainEventPtr ev = + virDomainEventNewInternal(VIR_DOMAIN_EVENT_ID_BLOCK_PULL, + id, name, uuid); + + if (ev) { + if (!(ev->data.blockPull.path = strdup(path))) { + virDomainEventFree(ev); + return NULL;
You want a virReportOOMError() call there.
+ } + ev->data.blockPull.status = status; + } + + return ev; +} + +virDomainEventPtr virDomainEventBlockPullNewFromObj(virDomainObjPtr obj, + const char *path, + int status) +{ + return virDomainEventBlockPullNew(obj->def->id, obj->def->name, + obj->def->uuid, path, status); +} + +virDomainEventPtr virDomainEventBlockPullNewFromDom(virDomainPtr dom, + const char *path, + int status) +{ + return virDomainEventBlockPullNew(dom->id, dom->name, dom->uuid, + path, status); +}
virDomainEventPtr virDomainEventControlErrorNewFromDom(virDomainPtr dom) {
+static int +qemuProcessHandleBlockPull(qemuMonitorPtr mon ATTRIBUTE_UNUSED, + virDomainObjPtr vm, + const char *diskAlias, + int status) +{ + struct qemud_driver *driver = qemu_driver; + virDomainEventPtr blockPullEvent = NULL; + const char *path; + virDomainDiskDefPtr disk; + + virDomainObjLock(vm); + disk = qemuProcessFindDomainDiskByAlias(vm, diskAlias); + + if (disk) + path = disk->src; + else + path = "";
If we can't find the disk associated with the alias, then I think we should just discard the event rather than emitting one with a zero-length path.
+ blockPullEvent = virDomainEventBlockPullNewFromObj(vm, path, status); + + virDomainObjUnlock(vm); + qemuDriverLock(driver); + qemuDomainEventQueue(driver, blockPullEvent); + qemuDriverUnlock(driver); + + return 0; +}
Regards, Daniel -- |: http://berrange.com -o- http://www.flickr.com/photos/dberrange/ :| |: http://libvirt.org -o- http://virt-manager.org :| |: http://autobuild.org -o- http://search.cpan.org/~danberr/ :| |: http://entangle-photo.org -o- http://live.gnome.org/gtk-vnc :|
On 06/14/2011 05:03 AM, Daniel P. Berrange wrote:
+static virDomainEventPtr +virDomainEventBlockPullNew(int id, const char *name, unsigned char *uuid, + const char *path, int status) +{ + virDomainEventPtr ev = + virDomainEventNewInternal(VIR_DOMAIN_EVENT_ID_BLOCK_PULL, + id, name, uuid); + + if (ev) { + if (!(ev->data.blockPull.path = strdup(path))) { + virDomainEventFree(ev); + return NULL;
You want a virReportOOMError() call there.
Yes, of course.
+static int +qemuProcessHandleBlockPull(qemuMonitorPtr mon ATTRIBUTE_UNUSED, + virDomainObjPtr vm, + const char *diskAlias, + int status) +{ + struct qemud_driver *driver = qemu_driver; + virDomainEventPtr blockPullEvent = NULL; + const char *path; + virDomainDiskDefPtr disk; + + virDomainObjLock(vm); + disk = qemuProcessFindDomainDiskByAlias(vm, diskAlias); + + if (disk) + path = disk->src; + else + path = "";
If we can't find the disk associated with the alias, then I think we should just discard the event rather than emitting one with a zero-length path.
Yes, this makes sense. Dome for the next series. -- Adam Litke IBM Linux Technology Center
*** Please do not consider for merging, example tests only *** Here are the testcases I am currently running to verify the correctness of this API. These are continuing to evolve. Signed-off-by: Adam Litke <agl@us.ibm.com> --- blockPull-test.py | 301 +++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 files changed, 301 insertions(+), 0 deletions(-) create mode 100755 blockPull-test.py diff --git a/blockPull-test.py b/blockPull-test.py new file mode 100755 index 0000000..d9ccfb6 --- /dev/null +++ b/blockPull-test.py @@ -0,0 +1,301 @@ +#!/usr/bin/env python + +import sys +import subprocess +import time +import unittest +import re +import threading +import libvirt + +qemu_img_bin = "/home/aglitke/src/qemu/qemu-img" +virsh_bin = "/home/aglitke/src/libvirt/tools/virsh" + +dom_xml = """ +<domain type='kvm'> + <name>blockPull-test</name> + <memory>131072</memory> + <currentMemory>131072</currentMemory> + <vcpu>1</vcpu> + <os> + <type arch='x86_64' machine='pc-0.13'>hvm</type> + <boot dev='hd'/> + </os> + <features> + <acpi/> + <apic/> + <pae/> + </features> + <clock offset='utc'/> + <on_poweroff>destroy</on_poweroff> + <on_reboot>restart</on_reboot> + <on_crash>restart</on_crash> + <devices> + <emulator>/home/aglitke/src/qemu/x86_64-softmmu/qemu-system-x86_64</emulator> + <disk type='file' device='disk'> + <driver name='qemu' type='qed'/> + <source file='/tmp/disk1.qed' /> + <target dev='vda' bus='virtio'/> + </disk> + <disk type='file' device='disk'> + <driver name='qemu' type='qed'/> + <source file='/tmp/disk2.qed' /> + <target dev='vdb' bus='virtio'/> + </disk> + <disk type='file' device='disk'> + <driver name='qemu' type='raw'/> + <source file='/tmp/disk3.raw' /> + <target dev='vdc' bus='virtio'/> + </disk> + <graphics type='vnc' port='-1' autoport='yes'/> + </devices> +</domain> +""" + +def qemu_img(*args): + global qemu_img_bin + + devnull = open('/dev/null', 'r+') + return subprocess.call([qemu_img_bin] + list(args), stdin=devnull, stdout=devnull) + +def virsh(*args): + global virsh_bin + + devnull = open('/dev/null', 'r+') + return subprocess.call([virsh_bin] + list(args), + stdin=devnull, stdout=devnull, stderr=devnull) + +def make_baseimage(name, size_mb): + devnull = open('/dev/null', 'r+') + return subprocess.call(['dd', 'if=/dev/zero', "of=%s" % name, 'bs=1M', + 'count=%i' % size_mb], stdin=devnull, stdout=devnull, stderr=devnull) + +def has_backing_file(path): + global qemu_img_bin + p1 = subprocess.Popen([qemu_img_bin, "info", path], + stdout=subprocess.PIPE).communicate()[0] + matches = re.findall("^backing file:", p1, re.M) + if len(matches) > 0: + return True + return False + +class BlockPullTestCase(unittest.TestCase): + def _error_handler(self, ctx, error, dummy=None): + pass + + def create_disks(self, sparse): + self.disks = [ '/tmp/disk1.qed', '/tmp/disk2.qed', '/tmp/disk3.raw' ] + if sparse: + qemu_img('create', '-f', 'raw', '/tmp/backing1.img', '100M') + qemu_img('create', '-f', 'raw', '/tmp/backing2.img', '100M') + else: + make_baseimage('/tmp/backing1.img', 100) + make_baseimage('/tmp/backing2.img', 100) + qemu_img('create', '-f', 'qed', '-o', 'backing_file=/tmp/backing1.img,copy_on_read=on', self.disks[0]) + qemu_img('create', '-f', 'qed', '-o', 'backing_file=/tmp/backing2.img,copy_on_read=on', self.disks[1]) + qemu_img('create', '-f', 'raw', self.disks[2], '100M') + + def begin(self, sparse=True): + global dom_xml + + libvirt.registerErrorHandler(self._error_handler, None) + self.create_disks(sparse) + self.conn = libvirt.open('qemu:///system') + self.dom = self.conn.createXML(dom_xml, 0) + + def end(self): + self.dom.destroy() + self.conn.close() + +class TestBasicErrors(BlockPullTestCase): + def setUp(self): + self.begin() + + def tearDown(self): + self.end() + + def test_bad_path(self): + try: + self.dom.blockPull('/dev/null', 0) + except libvirt.libvirtError, e: + self.assertEqual(libvirt.VIR_ERR_INVALID_ARG, e.get_error_code()) + else: + e = self.conn.virConnGetLastError() + self.assertEqual(libvirt.VIR_ERR_INVALID_ARG, e[0]) + + def test_abort_no_stream(self): + try: + self.dom.blockPullAbort(self.disks[0], 0) + except libvirt.libvirtError, e: + self.assertEqual(libvirt.VIR_ERR_OPERATION_INVALID, e.get_error_code()) + else: + e = self.conn.virConnGetLastError() + self.assertEqual(libvirt.VIR_ERR_OPERATION_INVALID, e[0]) + + def test_start_same_twice(self): + self.dom.blockPullAll(self.disks[0], 0) + try: + self.dom.blockPullAll(self.disks[0], 0) + except libvirt.libvirtError, e: + self.assertEqual(libvirt.VIR_ERR_OPERATION_FAILED, e.get_error_code()) + else: + e = self.conn.virConnGetLastError() + self.assertEqual(libvirt.VIR_ERR_OPERATION_FAILED, e[0]) + + def test_unsupported_disk(self): + try: + self.dom.blockPull(self.disks[2], 0) + except libvirt.libvirtError, e: + self.assertEqual(libvirt.VIR_ERR_OPERATION_INVALID, e.get_error_code()) + else: + e = self.conn.virConnGetLastError() + self.assertEqual(libvirt.VIR_ERR_OPERATION_INVALID, e[0]) + +class TestBasicCommands(BlockPullTestCase): + def setUp(self): + pass + + def tearDown(self): + self.end() + + def test_start_stop(self): + self.begin(sparse=False) + self.dom.blockPullAll(self.disks[0], 0) + time.sleep(1) + self.assertIsNot(None, self.dom.blockPullInfo(self.disks[0], 0)) + self.dom.blockPullAbort(self.disks[0], 0) + time.sleep(1) + self.assertIs(None, self.dom.blockPullInfo(self.disks[0], 0)) + + # Restarting the stream as incremental should not show up in + # blockPullInfo + self.dom.blockPull(self.disks[0], 0) + self.assertIs(None, self.dom.blockPullInfo(self.disks[0], 0)) + + def test_whole_disk(self): + self.begin() + self.assertTrue(has_backing_file(self.disks[0])) + self.dom.blockPullAll(self.disks[0], 0) + for i in xrange(1, 5): + if self.dom.blockPullInfo(self.disks[0], 0) is None: + break + time.sleep(1) + self.assertFalse(has_backing_file(self.disks[0])) + + def test_incremental(self): + self.begin() + last_cur = -1 + while True: + info = self.dom.blockPull(self.disks[0], 0) + if info is None or info['cur'] == info['end']: + break + self.assertGreater(info['cur'], last_cur) + last_cur = info['cur'] + self.assertFalse(has_backing_file(self.disks[0])) + + def test_interleaved(self): + self.begin() + disk_list = range(2) + while True: + for i in disk_list: + info = self.dom.blockPull(self.disks[i], 0) + if info is None or info['cur'] == info['end']: + disk_list.remove(i) + if len(disk_list) == 0: + break + for i in range(2): + self.assertFalse(has_backing_file(self.disks[i])) + + def test_two_disks_at_once(self): + self.begin() + disk_list = range(2) + for d in disk_list: + self.dom.blockPullAll(self.disks[d], 0) + + for i in xrange(5): + for d in disk_list: + info = self.dom.blockPullInfo(self.disks[d], 0) + if info is None: + disk_list.remove(d) + if len(disk_list) == 0: + break + time.sleep(1) + for d in range(2): + self.assertFalse(has_backing_file(self.disks[d])) + +class TestEvents(BlockPullTestCase): + def eventLoopRun(self): + while self.do_events: + libvirt.virEventRunDefaultImpl() + + def eventLoopStart(self): + libvirt.virEventRegisterDefaultImpl() + self.eventLoopThread = threading.Thread(target=self.eventLoopRun, name="libvirtEventLoop") + self.eventLoopThread.setDaemon(True) + self.do_events = True + self.eventLoopThread.start() + + def eventLoopStop(self): + self.do_events = False + + def setUp(self): + self.eventLoopStart() + + def tearDown(self): + self.end() + + @staticmethod + def recordBlockPullEvent(conn, dom, path, status, inst): + inst.event = (dom, path, status) + + def test_event_complete(self): + self.begin() + self.event = None + self.conn.domainEventRegisterAny(self.dom, libvirt.VIR_DOMAIN_EVENT_ID_BLOCK_PULL, + TestEvents.recordBlockPullEvent, self) + self.dom.blockPullAll(self.disks[0], 0) + for i in xrange(1, 5): + if self.event is not None: + break + time.sleep(1) + self.eventLoopStop() + self.assertIsNot(None, self.event) + self.assertFalse(has_backing_file(self.disks[0])) + self.assertEqual(self.event[1], self.disks[0]) + self.assertEqual(self.event[2], libvirt.VIR_DOMAIN_BLOCK_PULL_COMPLETED) + +class TestVirsh(BlockPullTestCase): + def setUp(self): + pass + + def tearDown(self): + self.end() + + def test_blockpull(self): + self.begin() + info1 = self.dom.blockPull(self.disks[0], 0) + virsh('blockpull', self.dom.name(), self.disks[0]) + info2 = self.dom.blockPull(self.disks[0], 0) + self.assertGreater(info2['cur'], info1['cur']) + + def test_blockpullall(self): + self.begin() + virsh('blockpullall', self.dom.name(), self.disks[0]) + for i in xrange(1, 5): + if self.dom.blockPullInfo(self.disks[0], 0) is None: + break + time.sleep(1) + self.assertFalse(has_backing_file(self.disks[0])) + + def test_blockpullabort(self): + self.begin(sparse=False) + self.dom.blockPullAll(self.disks[0], 0) + time.sleep(1) + self.assertIsNot(None, self.dom.blockPullInfo(self.disks[0], 0)) + virsh('blockpullall', self.dom.name(), '--abort', self.disks[0]) + time.sleep(1) + self.assertIs(None, self.dom.blockPullInfo(self.disks[0], 0)) + self.assertTrue(has_backing_file(self.disks[0])) + +if __name__ == '__main__': + unittest.main() -- 1.7.3
On Thu, Jun 09, 2011 at 12:10:14PM -0500, Adam Litke wrote:
*** Please do not consider for merging, example tests only ***
Here are the testcases I am currently running to verify the correctness of this API. These are continuing to evolve.
Signed-off-by: Adam Litke <agl@us.ibm.com> --- blockPull-test.py | 301 +++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 files changed, 301 insertions(+), 0 deletions(-) create mode 100755 blockPull-test.py
This is the kind of thing that could usefully go into the libvirt-tck test suite, though you'd need to provide patches for the libvirt-perl binding for the new APIs first. Regards, Daniel -- |: http://berrange.com -o- http://www.flickr.com/photos/dberrange/ :| |: http://libvirt.org -o- http://virt-manager.org :| |: http://autobuild.org -o- http://search.cpan.org/~danberr/ :| |: http://entangle-photo.org -o- http://live.gnome.org/gtk-vnc :|
participants (3)
-
Adam Litke -
Daniel P. Berrange -
Eric Blake