3:02 p.m.
This is the first try of the new -no-user-config option.
Patches 1 to 3 just move some code around, patch 4 just adds the new option
without adding any new config file. Patch 5 finally creates a /usr/share/qemu
/cpus-x86_64.conf file, with the CPU models we currently have on Qemu.
Reference to previous discussion:
- http://marc.info/?l=qemu-devel&m=133278877315665
This series depends on the following:
Subject: [PATCH v5 00/14] configure: --with-confsuffix option
Message-Id: <1334778950-18660-1-git-send-email-ehabkost(a)redhat.com>
Eduardo Habkost (5):
move code to read default config files to a separate function
eliminate arch_config_name variable
move list of default config files to an array
implement -no-user-config command-line option
move CPU definitions to /usr/share/qemu/cpus-x86_64.conf
Makefile | 12 +++-
arch_init.c | 31 ++++++++-
arch_init.h | 6 +-
qemu-options.hx | 16 ++++-
sysconfigs/target/cpus-x86_64.conf | 128 ++++++++++++++++++++++++++++++++++
sysconfigs/target/target-x86_64.conf | 128 ----------------------------------
vl.c | 14 ++--
7 files changed, 190 insertions(+), 145 deletions(-)
create mode 100644 sysconfigs/target/cpus-x86_64.conf
--
1.7.3.2
3:02 p.m.
New subject: [libvirt] [PATCH 1/5] move code to read default config files to a separate function
Function added to arch_init.c because it depends on arch-specific
settings.
Signed-off-by: Eduardo Habkost <ehabkost(a)redhat.com>
---
arch_init.c | 18 ++++++++++++++++++
arch_init.h | 4 ++++
vl.c | 10 ++--------
3 files changed, 24 insertions(+), 8 deletions(-)
diff --git a/arch_init.c b/arch_init.c
index 9a35aee..4008115 100644
--- a/arch_init.c
+++ b/arch_init.c
@@ -112,6 +112,24 @@ const uint32_t arch_type = QEMU_ARCH;
#define ALL_EQ(v1, v2) ((v1) == (v2))
#endif
+
+int qemu_read_default_config_files(void)
+{
+ int ret;
+
+ ret = qemu_read_config_file(CONFIG_QEMU_CONFDIR "/qemu.conf");
+ if (ret < 0 && ret != -ENOENT) {
+ return ret;
+ }
+
+ ret = qemu_read_config_file(arch_config_name);
+ if (ret < 0 && ret != -ENOENT) {
+ return ret;
+ }
+
+ return 0;
+}
+
static int is_dup_page(uint8_t *page)
{
VECTYPE *p = (VECTYPE *)page;
diff --git a/arch_init.h b/arch_init.h
index 828256c..329faf7 100644
--- a/arch_init.h
+++ b/arch_init.h
@@ -32,4 +32,8 @@ int tcg_available(void);
int kvm_available(void);
int xen_available(void);
+/* Read default Qemu config files
+ */
+int qemu_read_default_config_files(void);
+
#endif
diff --git a/vl.c b/vl.c
index ae91a8a..1e5e593 100644
--- a/vl.c
+++ b/vl.c
@@ -2354,14 +2354,8 @@ int main(int argc, char **argv, char **envp)
if (defconfig) {
int ret;
-
- ret = qemu_read_config_file(CONFIG_QEMU_CONFDIR "/qemu.conf");
- if (ret < 0 && ret != -ENOENT) {
- exit(1);
- }
-
- ret = qemu_read_config_file(arch_config_name);
- if (ret < 0 && ret != -ENOENT) {
+ ret = qemu_read_default_config_files();
+ if (ret < 0) {
exit(1);
}
}
--
1.7.3.2
3:02 p.m.
New subject: [libvirt] [PATCH 2/5] eliminate arch_config_name variable
Not needed anymore, as the code that uses the variable is already inside
arch_init.c.
Signed-off-by: Eduardo Habkost <ehabkost(a)redhat.com>
---
arch_init.c | 3 +--
arch_init.h | 2 --
2 files changed, 1 insertions(+), 4 deletions(-)
diff --git a/arch_init.c b/arch_init.c
index 4008115..152cbbb 100644
--- a/arch_init.c
+++ b/arch_init.c
@@ -54,7 +54,6 @@ int graphic_height = 600;
int graphic_depth = 15;
#endif
-const char arch_config_name[] = CONFIG_QEMU_CONFDIR "/target-" TARGET_ARCH
".conf";
#if defined(TARGET_ALPHA)
#define QEMU_ARCH QEMU_ARCH_ALPHA
@@ -122,7 +121,7 @@ int qemu_read_default_config_files(void)
return ret;
}
- ret = qemu_read_config_file(arch_config_name);
+ ret = qemu_read_config_file(CONFIG_QEMU_CONFDIR "/target-" TARGET_ARCH
".conf");
if (ret < 0 && ret != -ENOENT) {
return ret;
}
diff --git a/arch_init.h b/arch_init.h
index 329faf7..495871b 100644
--- a/arch_init.h
+++ b/arch_init.h
@@ -1,8 +1,6 @@
#ifndef QEMU_ARCH_INIT_H
#define QEMU_ARCH_INIT_H
-extern const char arch_config_name[];
-
enum {
QEMU_ARCH_ALL = -1,
QEMU_ARCH_ALPHA = 1,
--
1.7.3.2
3:02 p.m.
New subject: [libvirt] [PATCH 3/5] move list of default config files to an array
More files will be added to the list, with additional attributes, later.
Signed-off-by: Eduardo Habkost <ehabkost(a)redhat.com>
---
arch_init.c | 25 ++++++++++++++++---------
1 files changed, 16 insertions(+), 9 deletions(-)
diff --git a/arch_init.c b/arch_init.c
index 152cbbb..62332e9 100644
--- a/arch_init.c
+++ b/arch_init.c
@@ -112,20 +112,27 @@ const uint32_t arch_type = QEMU_ARCH;
#endif
+static struct defconfig_file {
+ const char *filename;
+} default_config_files[] = {
+ { CONFIG_QEMU_CONFDIR "/qemu.conf" },
+ { CONFIG_QEMU_CONFDIR "/target-" TARGET_ARCH ".conf" },
+ { NULL }, /* end of list */
+};
+
+
int qemu_read_default_config_files(void)
{
int ret;
-
- ret = qemu_read_config_file(CONFIG_QEMU_CONFDIR "/qemu.conf");
- if (ret < 0 && ret != -ENOENT) {
- return ret;
- }
+ struct defconfig_file *f;
- ret = qemu_read_config_file(CONFIG_QEMU_CONFDIR "/target-" TARGET_ARCH
".conf");
- if (ret < 0 && ret != -ENOENT) {
- return ret;
+ for (f = default_config_files; f->filename; f++) {
+ ret = qemu_read_config_file(f->filename);
+ if (ret < 0 && ret != -ENOENT) {
+ return ret;
+ }
}
-
+
return 0;
}
--
1.7.3.2
3:02 p.m.
New subject: [libvirt] [PATCH 4/5] implement -no-user-config command-line option
Signed-off-by: Eduardo Habkost <ehabkost(a)redhat.com>
---
arch_init.c | 10 +++++++---
arch_init.h | 2 +-
qemu-options.hx | 16 +++++++++++++---
vl.c | 6 +++++-
4 files changed, 26 insertions(+), 8 deletions(-)
diff --git a/arch_init.c b/arch_init.c
index 62332e9..c5fc00f 100644
--- a/arch_init.c
+++ b/arch_init.c
@@ -114,19 +114,23 @@ const uint32_t arch_type = QEMU_ARCH;
static struct defconfig_file {
const char *filename;
+ /* If non-zero, this is a user config file (disabled by -no-user-config) */
+ int userconfig;
} default_config_files[] = {
- { CONFIG_QEMU_CONFDIR "/qemu.conf" },
- { CONFIG_QEMU_CONFDIR "/target-" TARGET_ARCH ".conf" },
+ { CONFIG_QEMU_CONFDIR "/qemu.conf", 1 },
+ { CONFIG_QEMU_CONFDIR "/target-" TARGET_ARCH ".conf", 1 },
{ NULL }, /* end of list */
};
-int qemu_read_default_config_files(void)
+int qemu_read_default_config_files(int userconfig)
{
int ret;
struct defconfig_file *f;
for (f = default_config_files; f->filename; f++) {
+ if (!userconfig && f->userconfig)
+ continue;
ret = qemu_read_config_file(f->filename);
if (ret < 0 && ret != -ENOENT) {
return ret;
diff --git a/arch_init.h b/arch_init.h
index 495871b..07510cf 100644
--- a/arch_init.h
+++ b/arch_init.h
@@ -32,6 +32,6 @@ int xen_available(void);
/* Read default Qemu config files
*/
-int qemu_read_default_config_files(void);
+int qemu_read_default_config_files(int userconfig);
#endif
diff --git a/qemu-options.hx b/qemu-options.hx
index a169792..7d0b054 100644
--- a/qemu-options.hx
+++ b/qemu-options.hx
@@ -2685,9 +2685,19 @@ DEF("nodefconfig", 0, QEMU_OPTION_nodefconfig,
STEXI
@item -nodefconfig
@findex -nodefconfig
-Normally QEMU loads a configuration file from @var{sysconfdir}/qemu.conf and
-@var{sysconfdir}/target-(a)var{ARCH}.conf on startup. The @code{-nodefconfig}
-option will prevent QEMU from loading these configuration files at startup.
+Normally QEMU loads configuration files from @var{sysconfdir} and @var{datadir} at
startup.
+The @code{-nodefconfig} option will prevent QEMU from loading any of those config files.
+ETEXI
+DEF("no-user-config", 0, QEMU_OPTION_nouserconfig,
+ "-no-user-config\n"
+ " do not load user-provided config files at startup\n",
+ QEMU_ARCH_ALL)
+STEXI
+@item -no-user-config
+@findex -no-user-config
+The @code{-no-user-config} option makes QEMU not load any of the user-provided
+config files on @var{sysconfdir}, but won't make it skip the QEMU-provided config
+files from @var{datadir}.
ETEXI
DEF("trace", HAS_ARG, QEMU_OPTION_trace,
"-trace [events=<file>][,file=<file>]\n"
diff --git a/vl.c b/vl.c
index 1e5e593..347dadd 100644
--- a/vl.c
+++ b/vl.c
@@ -2280,6 +2280,7 @@ int main(int argc, char **argv, char **envp)
int show_vnc_port = 0;
#endif
int defconfig = 1;
+ int userconfig = 1;
const char *log_mask = NULL;
const char *log_file = NULL;
GMemVTable mem_trace = {
@@ -2348,13 +2349,16 @@ int main(int argc, char **argv, char **envp)
case QEMU_OPTION_nodefconfig:
defconfig=0;
break;
+ case QEMU_OPTION_nouserconfig:
+ userconfig=0;
+ break;
}
}
}
if (defconfig) {
int ret;
- ret = qemu_read_default_config_files();
+ ret = qemu_read_default_config_files(userconfig);
if (ret < 0) {
exit(1);
}
--
1.7.3.2
9:34 a.m.
New subject: [libvirt] [Qemu-devel] [PATCH 4/5] implement -no-user-config command-line option
On 04/18/2012 03:02 PM, Eduardo Habkost wrote:
Signed-off-by: Eduardo Habkost<ehabkost(a)redhat.com>
---
arch_init.c | 10 +++++++---
arch_init.h | 2 +-
qemu-options.hx | 16 +++++++++++++---
vl.c | 6 +++++-
4 files changed, 26 insertions(+), 8 deletions(-)
diff --git a/arch_init.c b/arch_init.c
index 62332e9..c5fc00f 100644
--- a/arch_init.c
+++ b/arch_init.c
@@ -114,19 +114,23 @@ const uint32_t arch_type = QEMU_ARCH;
static struct defconfig_file {
const char *filename;
+ /* If non-zero, this is a user config file (disabled by -no-user-config) */
+ int userconfig;
} default_config_files[] = {
- { CONFIG_QEMU_CONFDIR "/qemu.conf" },
- { CONFIG_QEMU_CONFDIR "/target-" TARGET_ARCH ".conf" },
+ { CONFIG_QEMU_CONFDIR "/qemu.conf", 1 },
+ { CONFIG_QEMU_CONFDIR "/target-" TARGET_ARCH ".conf", 1 },
{ NULL }, /* end of list */
};
-int qemu_read_default_config_files(void)
+int qemu_read_default_config_files(int userconfig)
{
int ret;
struct defconfig_file *f;
for (f = default_config_files; f->filename; f++) {
+ if (!userconfig&& f->userconfig)
+ continue;
Coding style is off here. While you're at it, you should make userconfig a bool.
ret = qemu_read_config_file(f->filename);
if (ret< 0&& ret != -ENOENT) {
return ret;
diff --git a/arch_init.h b/arch_init.h
index 495871b..07510cf 100644
--- a/arch_init.h
+++ b/arch_init.h
@@ -32,6 +32,6 @@ int xen_available(void);
/* Read default Qemu config files
*/
-int qemu_read_default_config_files(void);
+int qemu_read_default_config_files(int userconfig);
Let's use a bool here and move this to qemu-config.h. The declaration can live
there even if the definition is in arch_init.c
Regards,
Anthony Liguori
3:02 p.m.
New subject: [libvirt] [PATCH 5/5] move CPU definitions to /usr/share/qemu/cpus-x86_64.conf
Signed-off-by: Eduardo Habkost <ehabkost(a)redhat.com>
---
Makefile | 12 +++-
arch_init.c | 1 +
sysconfigs/target/cpus-x86_64.conf | 128 ++++++++++++++++++++++++++++++++++
sysconfigs/target/target-x86_64.conf | 128 ----------------------------------
4 files changed, 138 insertions(+), 131 deletions(-)
create mode 100644 sysconfigs/target/cpus-x86_64.conf
diff --git a/Makefile b/Makefile
index 4f43793..6c20f27 100644
--- a/Makefile
+++ b/Makefile
@@ -280,11 +280,18 @@ ifdef CONFIG_VIRTFS
$(INSTALL_DIR) "$(DESTDIR)$(mandir)/man1"
$(INSTALL_DATA) fsdev/virtfs-proxy-helper.1 "$(DESTDIR)$(mandir)/man1"
endif
-install-sysconfig:
+
+install-datadir:
+ $(INSTALL_DIR) "$(DESTDIR)$(qemu_datadir)"
+
+install-confdir:
$(INSTALL_DIR) "$(DESTDIR)$(qemu_confdir)"
+
+install-sysconfig: install-datadir install-confdir
$(INSTALL_DATA) $(SRC_PATH)/sysconfigs/target/target-x86_64.conf
"$(DESTDIR)$(qemu_confdir)"
+ $(INSTALL_DATA) $(SRC_PATH)/sysconfigs/target/cpus-x86_64.conf
"$(DESTDIR)$(qemu_datadir)"
-install: all $(if $(BUILD_DOCS),install-doc) install-sysconfig
+install: all $(if $(BUILD_DOCS),install-doc) install-sysconfig install-datadir
$(INSTALL_DIR) "$(DESTDIR)$(bindir)"
ifneq ($(TOOLS),)
$(INSTALL_PROG) $(STRIP_OPT) $(TOOLS) "$(DESTDIR)$(bindir)"
@@ -294,7 +301,6 @@ ifneq ($(HELPERS-y),)
$(INSTALL_PROG) $(STRIP_OPT) $(HELPERS-y) "$(DESTDIR)$(libexecdir)"
endif
ifneq ($(BLOBS),)
- $(INSTALL_DIR) "$(DESTDIR)$(qemu_datadir)"
set -e; for x in $(BLOBS); do \
$(INSTALL_DATA) $(SRC_PATH)/pc-bios/$$x "$(DESTDIR)$(qemu_datadir)"; \
done
diff --git a/arch_init.c b/arch_init.c
index c5fc00f..1d7f43d 100644
--- a/arch_init.c
+++ b/arch_init.c
@@ -117,6 +117,7 @@ static struct defconfig_file {
/* If non-zero, this is a user config file (disabled by -no-user-config) */
int userconfig;
} default_config_files[] = {
+ { CONFIG_QEMU_DATADIR "/cpus-" TARGET_ARCH ".conf", 0 },
{ CONFIG_QEMU_CONFDIR "/qemu.conf", 1 },
{ CONFIG_QEMU_CONFDIR "/target-" TARGET_ARCH ".conf", 1 },
{ NULL }, /* end of list */
diff --git a/sysconfigs/target/cpus-x86_64.conf b/sysconfigs/target/cpus-x86_64.conf
new file mode 100644
index 0000000..cee0ea9
--- /dev/null
+++ b/sysconfigs/target/cpus-x86_64.conf
@@ -0,0 +1,128 @@
+# x86 CPU MODELS
+
+[cpudef]
+ name = "Conroe"
+ level = "2"
+ vendor = "GenuineIntel"
+ family = "6"
+ model = "2"
+ stepping = "3"
+ feature_edx = "sse2 sse fxsr mmx clflush pse36 pat cmov mca pge mtrr sep apic cx8
mce pae msr tsc pse de fpu"
+ feature_ecx = "ssse3 sse3"
+ extfeature_edx = "i64 xd syscall"
+ extfeature_ecx = "lahf_lm"
+ xlevel = "0x8000000A"
+ model_id = "Intel Celeron_4x0 (Conroe/Merom Class Core 2)"
+
+[cpudef]
+ name = "Penryn"
+ level = "2"
+ vendor = "GenuineIntel"
+ family = "6"
+ model = "2"
+ stepping = "3"
+ feature_edx = "sse2 sse fxsr mmx clflush pse36 pat cmov mca pge mtrr sep apic cx8
mce pae msr tsc pse de fpu"
+ feature_ecx = "sse4.1 cx16 ssse3 sse3"
+ extfeature_edx = "i64 xd syscall"
+ extfeature_ecx = "lahf_lm"
+ xlevel = "0x8000000A"
+ model_id = "Intel Core 2 Duo P9xxx (Penryn Class Core 2)"
+
+[cpudef]
+ name = "Nehalem"
+ level = "2"
+ vendor = "GenuineIntel"
+ family = "6"
+ model = "2"
+ stepping = "3"
+ feature_edx = "sse2 sse fxsr mmx clflush pse36 pat cmov mca pge mtrr sep apic cx8
mce pae msr tsc pse de fpu"
+ feature_ecx = "popcnt sse4.2 sse4.1 cx16 ssse3 sse3"
+ extfeature_edx = "i64 syscall xd"
+ extfeature_ecx = "lahf_lm"
+ xlevel = "0x8000000A"
+ model_id = "Intel Core i7 9xx (Nehalem Class Core i7)"
+
+[cpudef]
+ name = "Westmere"
+ level = "11"
+ vendor = "GenuineIntel"
+ family = "6"
+ model = "44"
+ stepping = "1"
+ feature_edx = "sse2 sse fxsr mmx clflush pse36 pat cmov mca pge mtrr sep apic cx8
mce pae msr tsc pse de fpu"
+ feature_ecx = "aes popcnt sse4.2 sse4.1 cx16 ssse3 sse3"
+ extfeature_edx = "i64 syscall xd"
+ extfeature_ecx = "lahf_lm"
+ xlevel = "0x8000000A"
+ model_id = "Westmere E56xx/L56xx/X56xx (Nehalem-C)"
+
+[cpudef]
+ name = "SandyBridge"
+ level = "0xd"
+ vendor = "GenuineIntel"
+ family = "6"
+ model = "42"
+ stepping = "1"
+ feature_edx = " sse2 sse fxsr mmx clflush pse36 pat cmov mca pge mtrr sep apic
cx8 mce pae msr tsc pse de fpu"
+ feature_ecx = "avx xsave aes tsc-deadline popcnt x2apic sse4.2 sse4.1 cx16 ssse3
pclmulqdq sse3"
+ extfeature_edx = "i64 rdtscp nx syscall "
+ extfeature_ecx = "lahf_lm"
+ xlevel = "0x8000000A"
+ model_id = "Intel Xeon E312xx (Sandy Bridge)"
+
+[cpudef]
+ name = "Opteron_G1"
+ level = "5"
+ vendor = "AuthenticAMD"
+ family = "15"
+ model = "6"
+ stepping = "1"
+ feature_edx = "sse2 sse fxsr mmx clflush pse36 pat cmov mca pge mtrr sep apic cx8
mce pae msr tsc pse de fpu"
+ feature_ecx = "sse3"
+ extfeature_edx = "lm fxsr mmx nx pse36 pat cmov mca pge mtrr syscall apic cx8 mce
pae msr tsc pse de fpu"
+ extfeature_ecx = " "
+ xlevel = "0x80000008"
+ model_id = "AMD Opteron 240 (Gen 1 Class Opteron)"
+
+[cpudef]
+ name = "Opteron_G2"
+ level = "5"
+ vendor = "AuthenticAMD"
+ family = "15"
+ model = "6"
+ stepping = "1"
+ feature_edx = "sse2 sse fxsr mmx clflush pse36 pat cmov mca pge mtrr sep apic cx8
mce pae msr tsc pse de fpu"
+ feature_ecx = "cx16 sse3"
+ extfeature_edx = "lm rdtscp fxsr mmx nx pse36 pat cmov mca pge mtrr syscall apic
cx8 mce pae msr tsc pse de fpu"
+ extfeature_ecx = "svm lahf_lm"
+ xlevel = "0x80000008"
+ model_id = "AMD Opteron 22xx (Gen 2 Class Opteron)"
+
+[cpudef]
+ name = "Opteron_G3"
+ level = "5"
+ vendor = "AuthenticAMD"
+ family = "15"
+ model = "6"
+ stepping = "1"
+ feature_edx = "sse2 sse fxsr mmx clflush pse36 pat cmov mca pge mtrr sep apic cx8
mce pae msr tsc pse de fpu"
+ feature_ecx = "popcnt cx16 monitor sse3"
+ extfeature_edx = "lm rdtscp fxsr mmx nx pse36 pat cmov mca pge mtrr syscall apic
cx8 mce pae msr tsc pse de fpu"
+ extfeature_ecx = "misalignsse sse4a abm svm lahf_lm"
+ xlevel = "0x80000008"
+ model_id = "AMD Opteron 23xx (Gen 3 Class Opteron)"
+
+[cpudef]
+ name = "Opteron_G4"
+ level = "0xd"
+ vendor = "AuthenticAMD"
+ family = "21"
+ model = "1"
+ stepping = "2"
+ feature_edx = "sse2 sse fxsr mmx clflush pse36 pat cmov mca pge mtrr sep apic cx8
mce pae msr tsc pse de fpu"
+ feature_ecx = "avx xsave aes popcnt sse4.2 sse4.1 cx16 ssse3 pclmulqdq
sse3"
+ extfeature_edx = "lm rdtscp pdpe1gb fxsr mmx nx pse36 pat cmov mca pge mtrr
syscall apic cx8 mce pae msr tsc pse de fpu"
+ extfeature_ecx = " fma4 xop 3dnowprefetch misalignsse sse4a abm svm
lahf_lm"
+ xlevel = "0x8000001A"
+ model_id = "AMD Opteron 62xx class CPU"
+
diff --git a/sysconfigs/target/target-x86_64.conf b/sysconfigs/target/target-x86_64.conf
index cee0ea9..e69de29 100644
--- a/sysconfigs/target/target-x86_64.conf
+++ b/sysconfigs/target/target-x86_64.conf
@@ -1,128 +0,0 @@
-# x86 CPU MODELS
-
-[cpudef]
- name = "Conroe"
- level = "2"
- vendor = "GenuineIntel"
- family = "6"
- model = "2"
- stepping = "3"
- feature_edx = "sse2 sse fxsr mmx clflush pse36 pat cmov mca pge mtrr sep apic cx8
mce pae msr tsc pse de fpu"
- feature_ecx = "ssse3 sse3"
- extfeature_edx = "i64 xd syscall"
- extfeature_ecx = "lahf_lm"
- xlevel = "0x8000000A"
- model_id = "Intel Celeron_4x0 (Conroe/Merom Class Core 2)"
-
-[cpudef]
- name = "Penryn"
- level = "2"
- vendor = "GenuineIntel"
- family = "6"
- model = "2"
- stepping = "3"
- feature_edx = "sse2 sse fxsr mmx clflush pse36 pat cmov mca pge mtrr sep apic cx8
mce pae msr tsc pse de fpu"
- feature_ecx = "sse4.1 cx16 ssse3 sse3"
- extfeature_edx = "i64 xd syscall"
- extfeature_ecx = "lahf_lm"
- xlevel = "0x8000000A"
- model_id = "Intel Core 2 Duo P9xxx (Penryn Class Core 2)"
-
-[cpudef]
- name = "Nehalem"
- level = "2"
- vendor = "GenuineIntel"
- family = "6"
- model = "2"
- stepping = "3"
- feature_edx = "sse2 sse fxsr mmx clflush pse36 pat cmov mca pge mtrr sep apic cx8
mce pae msr tsc pse de fpu"
- feature_ecx = "popcnt sse4.2 sse4.1 cx16 ssse3 sse3"
- extfeature_edx = "i64 syscall xd"
- extfeature_ecx = "lahf_lm"
- xlevel = "0x8000000A"
- model_id = "Intel Core i7 9xx (Nehalem Class Core i7)"
-
-[cpudef]
- name = "Westmere"
- level = "11"
- vendor = "GenuineIntel"
- family = "6"
- model = "44"
- stepping = "1"
- feature_edx = "sse2 sse fxsr mmx clflush pse36 pat cmov mca pge mtrr sep apic cx8
mce pae msr tsc pse de fpu"
- feature_ecx = "aes popcnt sse4.2 sse4.1 cx16 ssse3 sse3"
- extfeature_edx = "i64 syscall xd"
- extfeature_ecx = "lahf_lm"
- xlevel = "0x8000000A"
- model_id = "Westmere E56xx/L56xx/X56xx (Nehalem-C)"
-
-[cpudef]
- name = "SandyBridge"
- level = "0xd"
- vendor = "GenuineIntel"
- family = "6"
- model = "42"
- stepping = "1"
- feature_edx = " sse2 sse fxsr mmx clflush pse36 pat cmov mca pge mtrr sep apic
cx8 mce pae msr tsc pse de fpu"
- feature_ecx = "avx xsave aes tsc-deadline popcnt x2apic sse4.2 sse4.1 cx16 ssse3
pclmulqdq sse3"
- extfeature_edx = "i64 rdtscp nx syscall "
- extfeature_ecx = "lahf_lm"
- xlevel = "0x8000000A"
- model_id = "Intel Xeon E312xx (Sandy Bridge)"
-
-[cpudef]
- name = "Opteron_G1"
- level = "5"
- vendor = "AuthenticAMD"
- family = "15"
- model = "6"
- stepping = "1"
- feature_edx = "sse2 sse fxsr mmx clflush pse36 pat cmov mca pge mtrr sep apic cx8
mce pae msr tsc pse de fpu"
- feature_ecx = "sse3"
- extfeature_edx = "lm fxsr mmx nx pse36 pat cmov mca pge mtrr syscall apic cx8 mce
pae msr tsc pse de fpu"
- extfeature_ecx = " "
- xlevel = "0x80000008"
- model_id = "AMD Opteron 240 (Gen 1 Class Opteron)"
-
-[cpudef]
- name = "Opteron_G2"
- level = "5"
- vendor = "AuthenticAMD"
- family = "15"
- model = "6"
- stepping = "1"
- feature_edx = "sse2 sse fxsr mmx clflush pse36 pat cmov mca pge mtrr sep apic cx8
mce pae msr tsc pse de fpu"
- feature_ecx = "cx16 sse3"
- extfeature_edx = "lm rdtscp fxsr mmx nx pse36 pat cmov mca pge mtrr syscall apic
cx8 mce pae msr tsc pse de fpu"
- extfeature_ecx = "svm lahf_lm"
- xlevel = "0x80000008"
- model_id = "AMD Opteron 22xx (Gen 2 Class Opteron)"
-
-[cpudef]
- name = "Opteron_G3"
- level = "5"
- vendor = "AuthenticAMD"
- family = "15"
- model = "6"
- stepping = "1"
- feature_edx = "sse2 sse fxsr mmx clflush pse36 pat cmov mca pge mtrr sep apic cx8
mce pae msr tsc pse de fpu"
- feature_ecx = "popcnt cx16 monitor sse3"
- extfeature_edx = "lm rdtscp fxsr mmx nx pse36 pat cmov mca pge mtrr syscall apic
cx8 mce pae msr tsc pse de fpu"
- extfeature_ecx = "misalignsse sse4a abm svm lahf_lm"
- xlevel = "0x80000008"
- model_id = "AMD Opteron 23xx (Gen 3 Class Opteron)"
-
-[cpudef]
- name = "Opteron_G4"
- level = "0xd"
- vendor = "AuthenticAMD"
- family = "21"
- model = "1"
- stepping = "2"
- feature_edx = "sse2 sse fxsr mmx clflush pse36 pat cmov mca pge mtrr sep apic cx8
mce pae msr tsc pse de fpu"
- feature_ecx = "avx xsave aes popcnt sse4.2 sse4.1 cx16 ssse3 pclmulqdq
sse3"
- extfeature_edx = "lm rdtscp pdpe1gb fxsr mmx nx pse36 pat cmov mca pge mtrr
syscall apic cx8 mce pae msr tsc pse de fpu"
- extfeature_ecx = " fma4 xop 3dnowprefetch misalignsse sse4a abm svm
lahf_lm"
- xlevel = "0x8000001A"
- model_id = "AMD Opteron 62xx class CPU"
-
--
1.7.3.2
9:17 a.m.
On Wed, Apr 18, 2012 at 17:02:35 -0300, Eduardo Habkost wrote:
This is the first try of the new -no-user-config option.
Patches 1 to 3 just move some code around, patch 4 just adds the new option
without adding any new config file. Patch 5 finally creates a /usr/share/qemu
/cpus-x86_64.conf file, with the CPU models we currently have on Qemu.
Reference to previous discussion:
- http://marc.info/?l=qemu-devel&m=133278877315665
This series depends on the following:
Subject: [PATCH v5 00/14] configure: --with-confsuffix option
Message-Id: <1334778950-18660-1-git-send-email-ehabkost(a)redhat.com>
Eduardo Habkost (5):
move code to read default config files to a separate function
eliminate arch_config_name variable
move list of default config files to an array
implement -no-user-config command-line option
move CPU definitions to /usr/share/qemu/cpus-x86_64.conf
This is a huge improvement from libvirt point of view. Thanks Eduadro. I'll
prepare corresponding libvirt patches.
Jirka
4688
days inactive
4694
days old
7 comments
3 participants
participants (3)
-
Anthony Liguori -
Eduardo Habkost -
Jiri Denemark