This patch adds support that enables passing of file descriptors to the QEMU monitor where they will be stored in specified file descriptor sets. A file descriptor set can be used by a client like libvirt to store file descriptors for the same file. This allows the client to open a file with different access modes (O_RDWR, O_WRONLY, O_RDONLY) and add/remove the passed fds to/from an fd set as needed. This will allow QEMU to (in a later patch in this series) "open" and "reopen" the same file by dup()ing the fd in the fd set that corresponds to the file, where the fd has the matching access mode flag that QEMU requests. The new QMP commands are: add-fd: Add a file descriptor to an fd set remove-fd: Remove a file descriptor from an fd set query-fdsets: Return information describing all fd sets Note: These commands are not compatible with the existing getfd and closefd QMP commands. Signed-off-by: Corey Bryant <coreyb@linux.vnet.ibm.com> --- v5: -This patch is new in v5 and replaces the pass-fd QMP command from v4. -By grouping fds in fd sets, we ease managability with an fd set per file, addressing concerns raised in v4 about handling "reopens" and preventing fd leakage. (eblake@redhat.com, kwolf@redhat.com, dberrange@redhat.com) v6 -Make @fd optional for remove-fd (eblake@redhat.com) -Make @fdset-id optional for add-fd (eblake@redhat.com) v7: -Share fd sets among all monitor connections (kwolf@redhat.com) -Added mon_refcount to keep track of monitor connection count. v8: -Add opaque string to add-fd/query-fdsets. (stefanha@linux.vnet.ibm.com) -Use camel case for structures. (stefanha@linux.vnet.ibm.com) -Don't return in-use and refcount from query-fdsets. (stefanha@linux.vnet.ibm.com) -Don't return removed fd's from query-fdsets. (stefanha@linux.vnet.ibm.com) -Use fdset-id rather than fdset_id. (eblake@redhat.com) -Fix fd leak in qmp_add_fd(). (stefanha@linux.vnet.ibm.com) -Update QMP errors. (stefanha@linux.vnet.ibm.com, eblake@redhat.com) v9: -Use fdset-id rather than fdset_id. (eblake@redhat.com) -Update example for query-fdsets. (eblake@redhat.com) -Close fd immediately on remove-fd. (kwolf@redhat.com, eblake@redhat.com) -Drop fdset refcount, and check dup_fds instead (in a later patch). (eblake@redhat.com) -Move mon_refcount code to a later patch. (kwolf@redhat.com) v10 -No trailing comma in query-fdsets example. (eblake@redhat.com) -Two separate messages in qmp_remove_fd. (eblake@redhat.com) -Modify text in qmp_add_fd invalid parameter error message. (eblake@redhat.com) v11 -No changes monitor.c | 189 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ qapi-schema.json | 98 ++++++++++++++++++++++++++++ qmp-commands.hx | 122 +++++++++++++++++++++++++++++++++++ 3 files changed, 409 insertions(+) diff --git a/monitor.c b/monitor.c index dd63f1d..8d813d5 100644 --- a/monitor.c +++ b/monitor.c @@ -140,6 +140,23 @@ struct mon_fd_t { QLIST_ENTRY(mon_fd_t) next; }; +/* file descriptor associated with a file descriptor set */ +typedef struct MonFdsetFd MonFdsetFd; +struct MonFdsetFd { + int fd; + bool removed; + char *opaque; + QLIST_ENTRY(MonFdsetFd) next; +}; + +/* file descriptor set containing fds passed via SCM_RIGHTS */ +typedef struct MonFdset MonFdset; +struct MonFdset { + int64_t id; + QLIST_HEAD(, MonFdsetFd) fds; + QLIST_ENTRY(MonFdset) next; +}; + typedef struct MonitorControl { QObject *id; JSONMessageParser parser; @@ -181,6 +198,7 @@ struct Monitor { #define QMP_ACCEPT_UNKNOWNS 1 static QLIST_HEAD(mon_list, Monitor) mon_list; +static QLIST_HEAD(mon_fdsets, MonFdset) mon_fdsets; static mon_cmd_t mon_cmds[]; static mon_cmd_t info_cmds[]; @@ -2366,6 +2384,177 @@ int monitor_get_fd(Monitor *mon, const char *fdname) return -1; } +static void monitor_fdset_cleanup(MonFdset *mon_fdset) +{ + MonFdsetFd *mon_fdset_fd; + MonFdsetFd *mon_fdset_fd_next; + + QLIST_FOREACH_SAFE(mon_fdset_fd, &mon_fdset->fds, next, mon_fdset_fd_next) { + if (mon_fdset_fd->removed) { + close(mon_fdset_fd->fd); + g_free(mon_fdset_fd->opaque); + QLIST_REMOVE(mon_fdset_fd, next); + g_free(mon_fdset_fd); + } + } + + if (QLIST_EMPTY(&mon_fdset->fds)) { + QLIST_REMOVE(mon_fdset, next); + g_free(mon_fdset); + } +} + +AddfdInfo *qmp_add_fd(bool has_fdset_id, int64_t fdset_id, bool has_opaque, + const char *opaque, Error **errp) +{ + int fd; + Monitor *mon = cur_mon; + MonFdset *mon_fdset; + MonFdsetFd *mon_fdset_fd; + AddfdInfo *fdinfo; + + fd = qemu_chr_fe_get_msgfd(mon->chr); + if (fd == -1) { + error_set(errp, QERR_FD_NOT_SUPPLIED); + goto error; + } + + if (has_fdset_id) { + QLIST_FOREACH(mon_fdset, &mon_fdsets, next) { + if (mon_fdset->id == fdset_id) { + break; + } + } + if (mon_fdset == NULL) { + error_set(errp, QERR_INVALID_PARAMETER_VALUE, "fdset-id", + "an existing fdset-id"); + goto error; + } + } else { + int64_t fdset_id_prev = -1; + MonFdset *mon_fdset_cur = QLIST_FIRST(&mon_fdsets); + + /* Use first available fdset ID */ + QLIST_FOREACH(mon_fdset, &mon_fdsets, next) { + mon_fdset_cur = mon_fdset; + if (fdset_id_prev == mon_fdset_cur->id - 1) { + fdset_id_prev = mon_fdset_cur->id; + continue; + } + break; + } + + mon_fdset = g_malloc0(sizeof(*mon_fdset)); + mon_fdset->id = fdset_id_prev + 1; + + /* The fdset list is ordered by fdset ID */ + if (mon_fdset->id == 0) { + QLIST_INSERT_HEAD(&mon_fdsets, mon_fdset, next); + } else if (mon_fdset->id < mon_fdset_cur->id) { + QLIST_INSERT_BEFORE(mon_fdset_cur, mon_fdset, next); + } else { + QLIST_INSERT_AFTER(mon_fdset_cur, mon_fdset, next); + } + } + + mon_fdset_fd = g_malloc0(sizeof(*mon_fdset_fd)); + mon_fdset_fd->fd = fd; + mon_fdset_fd->removed = false; + if (has_opaque) { + mon_fdset_fd->opaque = g_strdup(opaque); + } + QLIST_INSERT_HEAD(&mon_fdset->fds, mon_fdset_fd, next); + + fdinfo = g_malloc0(sizeof(*fdinfo)); + fdinfo->fdset_id = mon_fdset->id; + fdinfo->fd = mon_fdset_fd->fd; + + return fdinfo; + +error: + if (fd != -1) { + close(fd); + } + return NULL; +} + +void qmp_remove_fd(int64_t fdset_id, bool has_fd, int64_t fd, Error **errp) +{ + MonFdset *mon_fdset; + MonFdsetFd *mon_fdset_fd; + char fd_str[60]; + + QLIST_FOREACH(mon_fdset, &mon_fdsets, next) { + if (mon_fdset->id != fdset_id) { + continue; + } + QLIST_FOREACH(mon_fdset_fd, &mon_fdset->fds, next) { + if (has_fd) { + if (mon_fdset_fd->fd != fd) { + continue; + } + mon_fdset_fd->removed = true; + break; + } else { + mon_fdset_fd->removed = true; + } + } + if (has_fd && !mon_fdset_fd) { + goto error; + } + monitor_fdset_cleanup(mon_fdset); + return; + } + +error: + if (has_fd) { + snprintf(fd_str, sizeof(fd_str), "fdset-id:%" PRId64 ", fd:%" PRId64, + fdset_id, fd); + } else { + snprintf(fd_str, sizeof(fd_str), "fdset-id:%" PRId64, fdset_id); + } + error_set(errp, QERR_FD_NOT_FOUND, fd_str); +} + +FdsetInfoList *qmp_query_fdsets(Error **errp) +{ + MonFdset *mon_fdset; + MonFdsetFd *mon_fdset_fd; + FdsetInfoList *fdset_list = NULL; + + QLIST_FOREACH(mon_fdset, &mon_fdsets, next) { + FdsetInfoList *fdset_info = g_malloc0(sizeof(*fdset_info)); + FdsetFdInfoList *fdsetfd_list = NULL; + + fdset_info->value = g_malloc0(sizeof(*fdset_info->value)); + fdset_info->value->fdset_id = mon_fdset->id; + + QLIST_FOREACH(mon_fdset_fd, &mon_fdset->fds, next) { + FdsetFdInfoList *fdsetfd_info; + + fdsetfd_info = g_malloc0(sizeof(*fdsetfd_info)); + fdsetfd_info->value = g_malloc0(sizeof(*fdsetfd_info->value)); + fdsetfd_info->value->fd = mon_fdset_fd->fd; + if (mon_fdset_fd->opaque) { + fdsetfd_info->value->has_opaque = true; + fdsetfd_info->value->opaque = g_strdup(mon_fdset_fd->opaque); + } else { + fdsetfd_info->value->has_opaque = false; + } + + fdsetfd_info->next = fdsetfd_list; + fdsetfd_list = fdsetfd_info; + } + + fdset_info->value->fds = fdsetfd_list; + + fdset_info->next = fdset_list; + fdset_list = fdset_info; + } + + return fdset_list; +} + /* mon_cmds and info_cmds would be sorted at runtime */ static mon_cmd_t mon_cmds[] = { #include "hmp-commands.h" diff --git a/qapi-schema.json b/qapi-schema.json index 53bbe46..3d2b2d1 100644 --- a/qapi-schema.json +++ b/qapi-schema.json @@ -2356,3 +2356,101 @@ # Since: 1.2.0 ## { 'command': 'query-cpu-definitions', 'returns': ['CpuDefinitionInfo'] } + +# @AddfdInfo: +# +# Information about a file descriptor that was added to an fd set. +# +# @fdset-id: The ID of the fd set that @fd was added to. +# +# @fd: The file descriptor that was received via SCM rights and +# added to the fd set. +# +# Since: 1.2.0 +## +{ 'type': 'AddfdInfo', 'data': {'fdset-id': 'int', 'fd': 'int'} } + +## +# @add-fd: +# +# Add a file descriptor, that was passed via SCM rights, to an fd set. +# +# @fdset-id: #optional The ID of the fd set to add the file descriptor to. +# +# @opaque: #optional A free-form string that can be used to describe the fd. +# +# Returns: @AddfdInfo on success +# If file descriptor was not received, FdNotSupplied +# If @fdset-id does not exist, InvalidParameterValue +# +# Notes: The list of fd sets is shared by all monitor connections. +# +# If @fdset-id is not specified, a new fd set will be created. +# +# Since: 1.2.0 +## +{ 'command': 'add-fd', 'data': {'*fdset-id': 'int', '*opaque': 'str'}, + 'returns': 'AddfdInfo' } + +## +# @remove-fd: +# +# Remove a file descriptor from an fd set. +# +# @fdset-id: The ID of the fd set that the file descriptor belongs to. +# +# @fd: #optional The file descriptor that is to be removed. +# +# Returns: Nothing on success +# If @fdset-id or @fd is not found, FdNotFound +# +# Since: 1.2.0 +# +# Notes: The list of fd sets is shared by all monitor connections. +# +# If @fd is not specified, all file descriptors in @fdset-id +# will be removed. +## +{ 'command': 'remove-fd', 'data': {'fdset-id': 'int', '*fd': 'int'} } + +## +# @FdsetFdInfo: +# +# Information about a file descriptor that belongs to an fd set. +# +# @fd: The file descriptor value. +# +# @opaque: #optional A free-form string that can be used to describe the fd. +# +# Since: 1.2.0 +## +{ 'type': 'FdsetFdInfo', + 'data': {'fd': 'int', '*opaque': 'str'} } + +## +# @FdsetInfo: +# +# Information about an fd set. +# +# @fdset-id: The ID of the fd set. +# +# @fds: A list of file descriptors that belong to this fd set. +# +# Since: 1.2.0 +## +{ 'type': 'FdsetInfo', + 'data': {'fdset-id': 'int', 'fds': ['FdsetFdInfo']} } + +## +# @query-fdsets: +# +# Return information describing all fd sets. +# +# Returns: A list of @FdsetInfo +# +# Since: 1.2.0 +# +# Note: The list of fd sets is shared by all monitor connections. +# +## +{ 'command': 'query-fdsets', 'returns': ['FdsetInfo'] } diff --git a/qmp-commands.hx b/qmp-commands.hx index 527b9f7..2ce4ce6 100644 --- a/qmp-commands.hx +++ b/qmp-commands.hx @@ -970,6 +970,128 @@ Example: EQMP + { + .name = "add-fd", + .args_type = "fdset-id:i?,opaque:s?", + .params = "add-fd fdset-id opaque", + .help = "Add a file descriptor, that was passed via SCM rights, to an fd set", + .mhandler.cmd_new = qmp_marshal_input_add_fd, + }, + +SQMP +add-fd +------- + +Add a file descriptor, that was passed via SCM rights, to an fd set. + +Arguments: + +- "fdset-id": The ID of the fd set to add the file descriptor to. + (json-int, optional) +- "opaque": A free-form string that can be used to describe the fd. + (json-string, optional) + +Return a json-object with the following information: + +- "fdset-id": The ID of the fd set that the fd was added to. (json-int) +- "fd": The file descriptor that was received via SCM rights and added to the + fd set. (json-int) + +Example: + +-> { "execute": "add-fd", "arguments": { "fdset-id": 1 } } +<- { "return": { "fdset-id": 1, "fd": 3 } } + +Notes: + +(1) The list of fd sets is shared by all monitor connections. +(2) If "fdset-id" is not specified, a new fd set will be created. + +EQMP + + { + .name = "remove-fd", + .args_type = "fdset-id:i,fd:i?", + .params = "remove-fd fdset-id fd", + .help = "Remove a file descriptor from an fd set", + .mhandler.cmd_new = qmp_marshal_input_remove_fd, + }, + +SQMP +remove-fd +--------- + +Remove a file descriptor from an fd set. + +Arguments: + +- "fdset-id": The ID of the fd set that the file descriptor belongs to. + (json-int) +- "fd": The file descriptor that is to be removed. (json-int, optional) + +Example: + +-> { "execute": "remove-fd", "arguments": { "fdset-id": 1, "fd": 3 } } +<- { "return": {} } + +Notes: + +(1) The list of fd sets is shared by all monitor connections. +(2) If "fd" is not specified, all file descriptors in "fdset-id" will be + removed. + +EQMP + + { + .name = "query-fdsets", + .args_type = "", + .help = "Return information describing all fd sets", + .mhandler.cmd_new = qmp_marshal_input_query_fdsets, + }, + +SQMP +query-fdsets +------------- + +Return information describing all fd sets. + +Arguments: None + +Example: + +-> { "execute": "query-fdsets" } +<- { "return": [ + { + "fds": [ + { + "fd": 30, + "opaque": "rdonly:/path/to/file" + }, + { + "fd": 24, + "opaque": "rdwr:/path/to/file" + } + ], + "fdset-id": 1 + }, + { + "fds": [ + { + "fd": 28 + }, + { + "fd": 29 + } + ], + "fdset-id": 0 + } + ] + } + +Note: The list of fd sets is shared by all monitor connections. + +EQMP + { .name = "block_passwd", .args_type = "device:B,password:s", -- 1.7.10.4

This patch converts all block layer open calls to qemu_open. Note that this adds the O_CLOEXEC flag to the changed open paths when the O_CLOEXEC macro is defined. Signed-off-by: Corey Bryant <coreyb@linux.vnet.ibm.com> --- v2: -Convert calls to qemu_open instead of file_open (kwolf@redhat.com) -Mention introduction of O_CLOEXEC (kwolf@redhat.com) v3-v11: -No changes block/raw-posix.c | 18 +++++++++--------- block/raw-win32.c | 4 ++-- block/vdi.c | 5 +++-- block/vmdk.c | 21 +++++++++------------ block/vpc.c | 2 +- block/vvfat.c | 4 ++-- 6 files changed, 26 insertions(+), 28 deletions(-) diff --git a/block/raw-posix.c b/block/raw-posix.c index f606211..08b997e 100644 --- a/block/raw-posix.c +++ b/block/raw-posix.c @@ -572,8 +572,8 @@ static int raw_create(const char *filename, QEMUOptionParameter *options) options++; } - fd = open(filename, O_WRONLY | O_CREAT | O_TRUNC | O_BINARY, - 0644); + fd = qemu_open(filename, O_WRONLY | O_CREAT | O_TRUNC | O_BINARY, + 0644); if (fd < 0) { result = -errno; } else { @@ -846,7 +846,7 @@ static int hdev_open(BlockDriverState *bs, const char *filename, int flags) if ( bsdPath[ 0 ] != '\0' ) { strcat(bsdPath,"s0"); /* some CDs don't have a partition 0 */ - fd = open(bsdPath, O_RDONLY | O_BINARY | O_LARGEFILE); + fd = qemu_open(bsdPath, O_RDONLY | O_BINARY | O_LARGEFILE); if (fd < 0) { bsdPath[strlen(bsdPath)-1] = '1'; } else { @@ -903,7 +903,7 @@ static int fd_open(BlockDriverState *bs) #endif return -EIO; } - s->fd = open(bs->filename, s->open_flags & ~O_NONBLOCK); + s->fd = qemu_open(bs->filename, s->open_flags & ~O_NONBLOCK); if (s->fd < 0) { s->fd_error_time = get_clock(); s->fd_got_error = 1; @@ -977,7 +977,7 @@ static int hdev_create(const char *filename, QEMUOptionParameter *options) options++; } - fd = open(filename, O_WRONLY | O_BINARY); + fd = qemu_open(filename, O_WRONLY | O_BINARY); if (fd < 0) return -errno; @@ -1057,7 +1057,7 @@ static int floppy_probe_device(const char *filename) prio = 50; } - fd = open(filename, O_RDONLY | O_NONBLOCK); + fd = qemu_open(filename, O_RDONLY | O_NONBLOCK); if (fd < 0) { goto out; } @@ -1110,7 +1110,7 @@ static void floppy_eject(BlockDriverState *bs, bool eject_flag) close(s->fd); s->fd = -1; } - fd = open(bs->filename, s->open_flags | O_NONBLOCK); + fd = qemu_open(bs->filename, s->open_flags | O_NONBLOCK); if (fd >= 0) { if (ioctl(fd, FDEJECT, 0) < 0) perror("FDEJECT"); @@ -1160,7 +1160,7 @@ static int cdrom_probe_device(const char *filename) int prio = 0; struct stat st; - fd = open(filename, O_RDONLY | O_NONBLOCK); + fd = qemu_open(filename, O_RDONLY | O_NONBLOCK); if (fd < 0) { goto out; } @@ -1284,7 +1284,7 @@ static int cdrom_reopen(BlockDriverState *bs) */ if (s->fd >= 0) close(s->fd); - fd = open(bs->filename, s->open_flags, 0644); + fd = qemu_open(bs->filename, s->open_flags, 0644); if (fd < 0) { s->fd = -1; return -EIO; diff --git a/block/raw-win32.c b/block/raw-win32.c index e4b0b75..8d7838d 100644 --- a/block/raw-win32.c +++ b/block/raw-win32.c @@ -255,8 +255,8 @@ static int raw_create(const char *filename, QEMUOptionParameter *options) options++; } - fd = open(filename, O_WRONLY | O_CREAT | O_TRUNC | O_BINARY, - 0644); + fd = qemu_open(filename, O_WRONLY | O_CREAT | O_TRUNC | O_BINARY, + 0644); if (fd < 0) return -EIO; set_sparse(fd); diff --git a/block/vdi.c b/block/vdi.c index 57325d6..c4f1529 100644 --- a/block/vdi.c +++ b/block/vdi.c @@ -653,8 +653,9 @@ static int vdi_create(const char *filename, QEMUOptionParameter *options) options++; } - fd = open(filename, O_WRONLY | O_CREAT | O_TRUNC | O_BINARY | O_LARGEFILE, - 0644); + fd = qemu_open(filename, + O_WRONLY | O_CREAT | O_TRUNC | O_BINARY | O_LARGEFILE, + 0644); if (fd < 0) { return -errno; } diff --git a/block/vmdk.c b/block/vmdk.c index 18e9b4c..557dc1b 100644 --- a/block/vmdk.c +++ b/block/vmdk.c @@ -1161,10 +1161,9 @@ static int vmdk_create_extent(const char *filename, int64_t filesize, VMDK4Header header; uint32_t tmp, magic, grains, gd_size, gt_size, gt_count; - fd = open( - filename, - O_WRONLY | O_CREAT | O_TRUNC | O_BINARY | O_LARGEFILE, - 0644); + fd = qemu_open(filename, + O_WRONLY | O_CREAT | O_TRUNC | O_BINARY | O_LARGEFILE, + 0644); if (fd < 0) { return -errno; } @@ -1484,15 +1483,13 @@ static int vmdk_create(const char *filename, QEMUOptionParameter *options) (flags & BLOCK_FLAG_COMPAT6 ? 6 : 4), total_size / (int64_t)(63 * 16 * 512)); if (split || flat) { - fd = open( - filename, - O_WRONLY | O_CREAT | O_TRUNC | O_BINARY | O_LARGEFILE, - 0644); + fd = qemu_open(filename, + O_WRONLY | O_CREAT | O_TRUNC | O_BINARY | O_LARGEFILE, + 0644); } else { - fd = open( - filename, - O_WRONLY | O_BINARY | O_LARGEFILE, - 0644); + fd = qemu_open(filename, + O_WRONLY | O_BINARY | O_LARGEFILE, + 0644); } if (fd < 0) { return -errno; diff --git a/block/vpc.c b/block/vpc.c index 5cd13d1..60ebf5a 100644 --- a/block/vpc.c +++ b/block/vpc.c @@ -678,7 +678,7 @@ static int vpc_create(const char *filename, QEMUOptionParameter *options) } /* Create the file */ - fd = open(filename, O_WRONLY | O_CREAT | O_TRUNC | O_BINARY, 0644); + fd = qemu_open(filename, O_WRONLY | O_CREAT | O_TRUNC | O_BINARY, 0644); if (fd < 0) { return -EIO; } diff --git a/block/vvfat.c b/block/vvfat.c index 7b1dcee..22b586a 100644 --- a/block/vvfat.c +++ b/block/vvfat.c @@ -1162,7 +1162,7 @@ static int open_file(BDRVVVFATState* s,mapping_t* mapping) if(!s->current_mapping || strcmp(s->current_mapping->path,mapping->path)) { /* open file */ - int fd = open(mapping->path, O_RDONLY | O_BINARY | O_LARGEFILE); + int fd = qemu_open(mapping->path, O_RDONLY | O_BINARY | O_LARGEFILE); if(fd<0) return -1; vvfat_close_current_file(s); @@ -2221,7 +2221,7 @@ static int commit_one_file(BDRVVVFATState* s, for (i = s->cluster_size; i < offset; i += s->cluster_size) c = modified_fat_get(s, c); - fd = open(mapping->path, O_RDWR | O_CREAT | O_BINARY, 0666); + fd = qemu_open(mapping->path, O_RDWR | O_CREAT | O_BINARY, 0666); if (fd < 0) { fprintf(stderr, "Could not open %s... (%s, %d)\n", mapping->path, strerror(errno), errno); -- 1.7.10.4

When qemu_open is passed a filename of the "/dev/fdset/nnn" format (where nnn is the fdset ID), an fd with matching access mode flags will be searched for within the specified monitor fd set. If the fd is found, a dup of the fd will be returned from qemu_open. Signed-off-by: Corey Bryant <coreyb@linux.vnet.ibm.com> --- v2: -Get rid of file_open and move dup code to qemu_open (kwolf@redhat.com) -Use strtol wrapper instead of atoi (kwolf@redhat.com) v3: -Add note about fd leakage (eblake@redhat.com) v4 -Moved patch to be later in series (lcapitulino@redhat.com) -Update qemu_open to check access mode flags and set flags that can be set (eblake@redhat.com, kwolf@redhat.com) v5: -This patch was overhauled quite a bit in this version, with the addition of fd set and refcount support. -Use qemu_set_cloexec() on dup'd fd (eblake@redhat.com) -Modify flags set by fcntl on dup'd fd (eblake@redhat.com) -Reduce syscalls when setting flags for dup'd fd (eblake@redhat.com) -Fix O_RDWR, O_RDONLY, O_WRONLY checks (eblake@redhat.com) v6: -Pass only the fd to qemu_close() and keep track of dup fds per fd set. (kwolf@redhat.com, eblake@redhat.com) -Handle refcount incr/decr in new dup_fd_add/remove fd functions. -Use qemu_set_cloexec() appropriately in qemu_dup() (kwolf@redhat.com) -Simplify setting of setfl_flags in qemu_dup() (kwolf@redhat.com) -Add preprocessor checks for F_DUPFD_CLOEXEC (eblake@redhat.com) -Simplify flag checking in monitor_fdset_get_fd() (kwolf@redhat.com) v7: -Minor updates to reference global mon_fdsets, and to remove default_mon usage in osdep.c. (kwolf@redhat.com) v8: -Use camel case for structures. (stefanha@linux.vnet.ibm.com) v9: -Drop fdset refcount and check dup_fds instead. (eblake@redhat.com) -Fix dupfd leak in qemu_dup(). (eblake@redhat.com) -Always set O_CLOEXEC in qemu_dup(). (kwolf@redhat.com) -Change name of qemu_dup() to qemu_dup_flags(). (kwolf@redhat.com) v10: -Don't use underscore prefix on functions. (blauwirbel@gmail.com) -Set errno if monitor_fdset_dup_fd_add() fails. (eblake@redhat.com) -Check dupfd for -1 on qemu_dup_flags() call. (eblake@redhat.com) v11: -Fix build issues with Makefile and qemu-user.c updates. (kwolf@redhat.com) Makefile | 2 +- cutils.c | 5 +++ monitor.c | 83 +++++++++++++++++++++++++++++++++++++++++- monitor.h | 5 +++ osdep.c | 109 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ qemu-common.h | 1 + qemu-tool.c | 20 +++++++++++ qemu-user.c | 20 +++++++++++ tests/Makefile | 2 +- 9 files changed, 244 insertions(+), 3 deletions(-) diff --git a/Makefile b/Makefile index d736ea5..624ff8d 100644 --- a/Makefile +++ b/Makefile @@ -148,7 +148,7 @@ install-libcacard: libcacard.la $(call quiet-command,$(MAKE) $(SUBDIR_MAKEFLAGS) -C libcacard V="$(V)" TARGET_DIR="$*/" install-libcacard,) endif -vscclient$(EXESUF): $(libcacard-y) $(oslib-obj-y) $(trace-obj-y) qemu-timer-common.o libcacard/vscclient.o +vscclient$(EXESUF): $(libcacard-y) $(oslib-obj-y) $(trace-obj-y) $(tools-obj-y) qemu-timer-common.o libcacard/vscclient.o $(call quiet-command,$(CC) $(LDFLAGS) -o $@ $^ $(libcacard_libs) $(LIBS)," LINK $@") ###################################################################### diff --git a/cutils.c b/cutils.c index ee4614d..8ef648f 100644 --- a/cutils.c +++ b/cutils.c @@ -383,6 +383,11 @@ int qemu_parse_fd(const char *param) return fd; } +int qemu_parse_fdset(const char *param) +{ + return qemu_parse_fd(param); +} + /* round down to the nearest power of 2*/ int64_t pow2floor(int64_t value) { diff --git a/monitor.c b/monitor.c index 8d813d5..c2652b4 100644 --- a/monitor.c +++ b/monitor.c @@ -154,6 +154,7 @@ typedef struct MonFdset MonFdset; struct MonFdset { int64_t id; QLIST_HEAD(, MonFdsetFd) fds; + QLIST_HEAD(, MonFdsetFd) dup_fds; QLIST_ENTRY(MonFdset) next; }; @@ -2398,7 +2399,7 @@ static void monitor_fdset_cleanup(MonFdset *mon_fdset) } } - if (QLIST_EMPTY(&mon_fdset->fds)) { + if (QLIST_EMPTY(&mon_fdset->fds) && QLIST_EMPTY(&mon_fdset->dup_fds)) { QLIST_REMOVE(mon_fdset, next); g_free(mon_fdset); } @@ -2555,6 +2556,86 @@ FdsetInfoList *qmp_query_fdsets(Error **errp) return fdset_list; } +int monitor_fdset_get_fd(int64_t fdset_id, int flags) +{ + MonFdset *mon_fdset; + MonFdsetFd *mon_fdset_fd; + int mon_fd_flags; + + QLIST_FOREACH(mon_fdset, &mon_fdsets, next) { + if (mon_fdset->id != fdset_id) { + continue; + } + QLIST_FOREACH(mon_fdset_fd, &mon_fdset->fds, next) { + mon_fd_flags = fcntl(mon_fdset_fd->fd, F_GETFL); + if (mon_fd_flags == -1) { + return -1; + } + + if ((flags & O_ACCMODE) == (mon_fd_flags & O_ACCMODE)) { + return mon_fdset_fd->fd; + } + } + errno = EACCES; + return -1; + } + errno = ENOENT; + return -1; +} + +int monitor_fdset_dup_fd_add(int64_t fdset_id, int dup_fd) +{ + MonFdset *mon_fdset; + MonFdsetFd *mon_fdset_fd_dup; + + QLIST_FOREACH(mon_fdset, &mon_fdsets, next) { + if (mon_fdset->id != fdset_id) { + continue; + } + QLIST_FOREACH(mon_fdset_fd_dup, &mon_fdset->dup_fds, next) { + if (mon_fdset_fd_dup->fd == dup_fd) { + return -1; + } + } + mon_fdset_fd_dup = g_malloc0(sizeof(*mon_fdset_fd_dup)); + mon_fdset_fd_dup->fd = dup_fd; + QLIST_INSERT_HEAD(&mon_fdset->dup_fds, mon_fdset_fd_dup, next); + return 0; + } + return -1; +} + +static int monitor_fdset_dup_fd_find_remove(int dup_fd, bool remove) +{ + MonFdset *mon_fdset; + MonFdsetFd *mon_fdset_fd_dup; + + QLIST_FOREACH(mon_fdset, &mon_fdsets, next) { + QLIST_FOREACH(mon_fdset_fd_dup, &mon_fdset->dup_fds, next) { + if (mon_fdset_fd_dup->fd == dup_fd) { + if (remove) { + QLIST_REMOVE(mon_fdset_fd_dup, next); + if (QLIST_EMPTY(&mon_fdset->dup_fds)) { + monitor_fdset_cleanup(mon_fdset); + } + } + return mon_fdset->id; + } + } + } + return -1; +} + +int monitor_fdset_dup_fd_find(int dup_fd) +{ + return monitor_fdset_dup_fd_find_remove(dup_fd, false); +} + +int monitor_fdset_dup_fd_remove(int dup_fd) +{ + return monitor_fdset_dup_fd_find_remove(dup_fd, true); +} + /* mon_cmds and info_cmds would be sorted at runtime */ static mon_cmd_t mon_cmds[] = { #include "hmp-commands.h" diff --git a/monitor.h b/monitor.h index 4ef9a04..47d556b 100644 --- a/monitor.h +++ b/monitor.h @@ -87,4 +87,9 @@ int qmp_qom_set(Monitor *mon, const QDict *qdict, QObject **ret); int qmp_qom_get(Monitor *mon, const QDict *qdict, QObject **ret); +int monitor_fdset_get_fd(int64_t fdset_id, int flags); +int monitor_fdset_dup_fd_add(int64_t fdset_id, int dup_fd); +int monitor_fdset_dup_fd_remove(int dup_fd); +int monitor_fdset_dup_fd_find(int dup_fd); + #endif /* !MONITOR_H */ diff --git a/osdep.c b/osdep.c index 7f876ae..2688af5 100644 --- a/osdep.c +++ b/osdep.c @@ -48,6 +48,7 @@ extern int madvise(caddr_t, size_t, int); #include "qemu-common.h" #include "trace.h" #include "qemu_socket.h" +#include "monitor.h" static bool fips_enabled = false; @@ -78,6 +79,64 @@ int qemu_madvise(void *addr, size_t len, int advice) #endif } +/* + * Dups an fd and sets the flags + */ +static int qemu_dup_flags(int fd, int flags) +{ + int ret; + int serrno; + int dup_flags; + int setfl_flags; + +#ifdef F_DUPFD_CLOEXEC + ret = fcntl(fd, F_DUPFD_CLOEXEC, 0); +#else + ret = dup(fd); + if (ret != -1) { + qemu_set_cloexec(ret); + } +#endif + if (ret == -1) { + goto fail; + } + + dup_flags = fcntl(ret, F_GETFL); + if (dup_flags == -1) { + goto fail; + } + + if ((flags & O_SYNC) != (dup_flags & O_SYNC)) { + errno = EINVAL; + goto fail; + } + + /* Set/unset flags that we can with fcntl */ + setfl_flags = O_APPEND | O_ASYNC | O_DIRECT | O_NOATIME | O_NONBLOCK; + dup_flags &= ~setfl_flags; + dup_flags |= (flags & setfl_flags); + if (fcntl(ret, F_SETFL, dup_flags) == -1) { + goto fail; + } + + /* Truncate the file in the cases that open() would truncate it */ + if (flags & O_TRUNC || + ((flags & (O_CREAT | O_EXCL)) == (O_CREAT | O_EXCL))) { + if (ftruncate(ret, 0) == -1) { + goto fail; + } + } + + return ret; + +fail: + serrno = errno; + if (ret != -1) { + close(ret); + } + errno = serrno; + return -1; +} /* * Opens a file with FD_CLOEXEC set @@ -87,6 +146,41 @@ int qemu_open(const char *name, int flags, ...) int ret; int mode = 0; +#ifndef _WIN32 + const char *fdset_id_str; + + /* Attempt dup of fd from fd set */ + if (strstart(name, "/dev/fdset/", &fdset_id_str)) { + int64_t fdset_id; + int fd, dupfd; + + fdset_id = qemu_parse_fdset(fdset_id_str); + if (fdset_id == -1) { + errno = EINVAL; + return -1; + } + + fd = monitor_fdset_get_fd(fdset_id, flags); + if (fd == -1) { + return -1; + } + + dupfd = qemu_dup_flags(fd, flags); + if (dupfd == -1) { + return -1; + } + + ret = monitor_fdset_dup_fd_add(fdset_id, dupfd); + if (ret == -1) { + close(dupfd); + errno = EINVAL; + return -1; + } + + return dupfd; + } +#endif + if (flags & O_CREAT) { va_list ap; @@ -109,6 +203,21 @@ int qemu_open(const char *name, int flags, ...) int qemu_close(int fd) { + int64_t fdset_id; + + /* Close fd that was dup'd from an fdset */ + fdset_id = monitor_fdset_dup_fd_find(fd); + if (fdset_id != -1) { + int ret; + + ret = close(fd); + if (ret == 0) { + monitor_fdset_dup_fd_remove(fd); + } + + return ret; + } + return close(fd); } diff --git a/qemu-common.h b/qemu-common.h index b388c5c..e5c2bcd 100644 --- a/qemu-common.h +++ b/qemu-common.h @@ -167,6 +167,7 @@ int qemu_fls(int i); int qemu_fdatasync(int fd); int fcntl_setfl(int fd, int flag); int qemu_parse_fd(const char *param); +int qemu_parse_fdset(const char *param); /* * strtosz() suffixes used to specify the default treatment of an diff --git a/qemu-tool.c b/qemu-tool.c index 64b5e88..18205ba 100644 --- a/qemu-tool.c +++ b/qemu-tool.c @@ -62,6 +62,26 @@ void monitor_protocol_event(MonitorEvent event, QObject *data) { } +int monitor_fdset_get_fd(int64_t fdset_id, int flags) +{ + return -1; +} + +int monitor_fdset_dup_fd_add(int64_t fdset_id, int dup_fd) +{ + return -1; +} + +int monitor_fdset_dup_fd_remove(int dup_fd) +{ + return -1; +} + +int monitor_fdset_dup_fd_find(int dup_fd) +{ + return -1; +} + int64_t cpu_get_clock(void) { return qemu_get_clock_ns(rt_clock); diff --git a/qemu-user.c b/qemu-user.c index 08ccb0f..13fb9ae 100644 --- a/qemu-user.c +++ b/qemu-user.c @@ -35,3 +35,23 @@ void monitor_vprintf(Monitor *mon, const char *fmt, va_list ap) void monitor_set_error(Monitor *mon, QError *qerror) { } + +int monitor_fdset_get_fd(int64_t fdset_id, int flags) +{ + return -1; +} + +int monitor_fdset_dup_fd_add(int64_t fdset_id, int dup_fd) +{ + return -1; +} + +int monitor_fdset_dup_fd_remove(int dup_fd) +{ + return -1; +} + +int monitor_fdset_dup_fd_find(int dup_fd) +{ + return -1; +} diff --git a/tests/Makefile b/tests/Makefile index f3f4159..26a67ce 100644 --- a/tests/Makefile +++ b/tests/Makefile @@ -81,7 +81,7 @@ TARGETS=$(patsubst %-softmmu,%, $(filter %-softmmu,$(TARGET_DIRS))) QTEST_TARGETS=$(foreach TARGET,$(TARGETS), $(if $(check-qtest-$(TARGET)-y), $(TARGET),)) check-qtest-$(CONFIG_POSIX)=$(foreach TARGET,$(TARGETS), $(check-qtest-$(TARGET)-y)) -qtest-obj-y = tests/libqtest.o $(oslib-obj-y) +qtest-obj-y = tests/libqtest.o $(oslib-obj-y) $(tools-obj-y) $(check-qtest-y): $(qtest-obj-y) .PHONY: check-help -- 1.7.10.4