2:52 a.m.
virsh: inherit qos from network definition when attaching an interface
Resolved: https://bugzilla.redhat.com/show_bug.cgi?id=1826168
jx8zjs (1):
virsh: inherit qos from network definition when attaching an interface
tools/virsh-domain.c | 34 +++++++++++++++++++++++++++++++---
1 file changed, 31 insertions(+), 3 deletions(-)
--
2.30.2.windows.1
2:52 a.m.
New subject: [PATCH 1/1] virsh: inherit qos from network definition when attaching an interface
Fix bug 1826168: bridge type network with ovs bridge can start with Qos
setting which do not take any effect
Resolves:https://bugzilla.redhat.com/show_bug.cgi?id=1826168
Signed-off-by: jx8zjs <jx8zjs(a)126.com>
---
tools/virsh-domain.c | 34 +++++++++++++++++++++++++++++++---
1 file changed, 31 insertions(+), 3 deletions(-)
diff --git a/tools/virsh-domain.c b/tools/virsh-domain.c
index 7f3356a536..b809a0e30f 100644
--- a/tools/virsh-domain.c
+++ b/tools/virsh-domain.c
@@ -32,6 +32,7 @@
#include "virbitmap.h"
#include "virbuffer.h"
#include "conf/domain_conf.h"
+#include "conf/network_conf.h"
#include "viralloc.h"
#include "vircommand.h"
#include "virfile.h"
@@ -907,6 +908,7 @@ cmdAttachInterface(vshControl *ctl, const vshCmd *cmd)
g_auto(virBuffer) buf = VIR_BUFFER_INITIALIZER;
g_autofree char *xml = NULL;
unsigned int flags = VIR_DOMAIN_AFFECT_CURRENT;
+ bool sourceQos = false;
bool current = vshCommandOptBool(cmd, "current");
bool config = vshCommandOptBool(cmd, "config");
bool live = vshCommandOptBool(cmd, "live");
@@ -971,6 +973,32 @@ cmdAttachInterface(vshControl *ctl, const vshCmd *cmd)
}
}
+ if (!inboundStr && !outboundStr) {
+ virNetworkPtr network = NULL;
+ virshControl *priv = ctl->privData;
+ g_autofree char *networkDump = NULL;
+ g_autoptr(virNetworkDef) netdef = NULL;
+
+ network = virNetworkLookupByName(priv->conn, source);
+
+ if (network) {
+ networkDump = virNetworkGetXMLDesc(network, VIR_NETWORK_XML_INACTIVE);
+ netdef = virNetworkDefParseString(networkDump, NULL, false);
+ if (netdef->bandwidth) {
+ sourceQos = true;
+ memset(&inbound, 0, sizeof(inbound));
+ inbound = *netdef->bandwidth->in;
+ memset(&outbound, 0, sizeof(outbound));
+ outbound = *netdef->bandwidth->out;
+ }
+ } else {
+ vshDebug(ctl, VSH_ERR_DEBUG, "failed to get network '%s'",
source);
+ }
+
+ virObjectUnref(network);
+ virObjectUnref(priv);
+ }
+
/* Make XML of interface */
virBufferAsprintf(&buf, "<interface type='%s'", type);
@@ -1045,10 +1073,10 @@ cmdAttachInterface(vshControl *ctl, const vshCmd *cmd)
if (alias != NULL)
virBufferAsprintf(&buf, "<alias name='%s'/>\n",
alias);
- if (inboundStr || outboundStr) {
+ if (inboundStr || outboundStr || sourceQos) {
virBufferAddLit(&buf, "<bandwidth>\n");
virBufferAdjustIndent(&buf, 2);
- if (inboundStr && (inbound.average || inbound.floor)) {
+ if ((inboundStr || sourceQos) && (inbound.average || inbound.floor)) {
virBufferAddLit(&buf, "<inbound");
if (inbound.average > 0)
virBufferAsprintf(&buf, " average='%llu'",
inbound.average);
@@ -1060,7 +1088,7 @@ cmdAttachInterface(vshControl *ctl, const vshCmd *cmd)
virBufferAsprintf(&buf, " floor='%llu'",
inbound.floor);
virBufferAddLit(&buf, "/>\n");
}
- if (outboundStr && outbound.average > 0) {
+ if ((outboundStr || sourceQos) && outbound.average > 0) {
virBufferAsprintf(&buf, "<outbound average='%llu'",
outbound.average);
if (outbound.peak > 0)
virBufferAsprintf(&buf, " peak='%llu'",
outbound.peak);
--
2.30.2.windows.1
10:55 a.m.
New subject: [PATCH 1/1] virsh: inherit qos from network definition when attaching an interface
On 11/1/21 8:52 AM, jx8zjs wrote:
Fix bug 1826168: bridge type network with ovs bridge can start with
Qos
setting which do not take any effect
Resolves:https://bugzilla.redhat.com/show_bug.cgi?id=1826168
Signed-off-by: jx8zjs <jx8zjs(a)126.com>
---
tools/virsh-domain.c | 34 +++++++++++++++++++++++++++++++---
1 file changed, 31 insertions(+), 3 deletions(-)
I don't think this is right. The bug is about setting QoS on the bridge
itself not TAP devices plugged into it. From the bug, this is the QoS
setting:
<bandwidth>
<inbound average='1000' peak='5000' burst='5120'/>
<outbound average='128' peak='256' burst='256'/>
</bandwidth>
And this is the resulting tc setting:
# tc qdisc show dev virbr0
qdisc htb 1: root refcnt 2 r2q 10 default 0x2 direct_packets_stat 0 direct_qlen 1000
qdisc sfq 2: parent 1:2 limit 127p quantum 1514b depth 127 divisor 1024 perturb 10sec
qdisc ingress ffff: parent ffff:fff1 ----------------
# tc class show dev virbr0
class htb 1:1 root rate 8Mbit ceil 40Mbit burst 1600b cburst 1600b
class htb 1:2 parent 1:1 leaf 2: prio 0 rate 8Mbit ceil 40Mbit burst 5Mb cburst 1600b
# tc filter show dev virbr0
filter parent 1: protocol all pref 1 fw chain 0
filter parent 1: protocol all pref 1 fw chain 0 handle 0x1 classid :1
# tc filter show dev virbr0 ingress
filter parent ffff: protocol all pref 49152 u32 chain 0
filter parent ffff: protocol all pref 49152 u32 chain 0 fh 800: ht divisor 1
filter parent ffff: protocol all pref 49152 u32 chain 0 fh 800::800 order 2048 key ht 800
bkt 0 flowid :1 not_in_hw
match 00000000/00000000 at 0
police 0x1 rate 1024Kbit burst 256Kb mtu 64Kb action drop overhead 0b
ref 1 bind 1
what this does is when there's an <interface/> from this network
(without its own QoS) in a guest, it is rate limited by default.
Moreover, if there are two interfaces, with no QoS set, then they share
the same rate, which means in this case that they both share 1mbps
bandwidth. It does NOT mean that each <interface/> has its own 1mbps
bandwidth to spare. The only way to achieve this behaviour is to set QoS
on the bridge itself and not individual interfaces.
Michal
3:43 a.m.
New subject: 答复: [PATCH 1/1] virsh: inherit qos from network definition when attaching an interface
Hi Michal,
Thank you for the explanation. I misunderstood the setting QoS on the bridge and
interfaces.
I will try to use ovs-vsctl to set up bandwidth when using an OVS bridge.
-------
Best Regards,
Jinsheng Zhang
-----邮件原件-----
发件人: Michal Prívozník [mailto:mprivozn@redhat.com]
发送时间: 2021年11月1日 23:56
收件人: jx8zjs; libvir-list(a)redhat.com
抄送: Norman Shen(申嘉童); Jinsheng Zhang (张金生)-云服务集团
主题: Re: [PATCH 1/1] virsh: inherit qos from network definition when attaching an
interface
On 11/1/21 8:52 AM, jx8zjs wrote:
Fix bug 1826168: bridge type network with ovs bridge can start with
Qos setting which do not take any effect
Resolves:https://bugzilla.redhat.com/show_bug.cgi?id=1826168
Signed-off-by: jx8zjs <jx8zjs(a)126.com>
---
tools/virsh-domain.c | 34 +++++++++++++++++++++++++++++++---
1 file changed, 31 insertions(+), 3 deletions(-)
I don't think this is right. The bug is about setting QoS on the bridge itself not TAP
devices plugged into it. From the bug, this is the QoS
setting:
<bandwidth>
<inbound average='1000' peak='5000' burst='5120'/>
<outbound average='128' peak='256' burst='256'/>
</bandwidth>
And this is the resulting tc setting:
# tc qdisc show dev virbr0
qdisc htb 1: root refcnt 2 r2q 10 default 0x2 direct_packets_stat 0 direct_qlen 1000 qdisc
sfq 2: parent 1:2 limit 127p quantum 1514b depth 127 divisor 1024 perturb 10sec qdisc
ingress ffff: parent ffff:fff1 ----------------
# tc class show dev virbr0
class htb 1:1 root rate 8Mbit ceil 40Mbit burst 1600b cburst 1600b class htb 1:2 parent
1:1 leaf 2: prio 0 rate 8Mbit ceil 40Mbit burst 5Mb cburst 1600b
# tc filter show dev virbr0
filter parent 1: protocol all pref 1 fw chain 0 filter parent 1: protocol all pref 1 fw
chain 0 handle 0x1 classid :1
# tc filter show dev virbr0 ingress
filter parent ffff: protocol all pref 49152 u32 chain 0 filter parent ffff: protocol all
pref 49152 u32 chain 0 fh 800: ht divisor 1 filter parent ffff: protocol all pref 49152
u32 chain 0 fh 800::800 order 2048 key ht 800 bkt 0 flowid :1 not_in_hw
match 00000000/00000000 at 0
police 0x1 rate 1024Kbit burst 256Kb mtu 64Kb action drop overhead 0b
ref 1 bind 1
what this does is when there's an <interface/> from this network (without its
own QoS) in a guest, it is rate limited by default.
Moreover, if there are two interfaces, with no QoS set, then they share the same rate,
which means in this case that they both share 1mbps bandwidth. It does NOT mean that each
<interface/> has its own 1mbps bandwidth to spare. The only way to achieve this
behaviour is to set QoS on the bridge itself and not individual interfaces.
Michal
1148
days inactive
1149
days old
3 comments
3 participants
participants (3)
-
Jinsheng Zhang (张金生)-云服务集团 -
jx8zjs -
Michal Prívozník