Re: [libvirt] SPAM-LOW: Re: Re: Node.GetInfo error
?:S I'm far away from a git expert :S Maybe anyone on the list can help us ? Arnaud From: 黄亮 Sent: Monday, November 01, 2010 2:42 PM To: arnaud.champion@devatom.fr Subject: Re: Re: Re: SPAM-LOW: Re: Re: Node.GetInfo error Hi Arnaud, I tried GitExtension, but while applying patch, it returns "Patch format detection failed. " Should I change some settings or is there something not right in the patch file? Regards 2010-11-01 -------------------------------------------------------------------------------- Lancer -------------------------------------------------------------------------------- 发件人： arnaud.champion@devatom.fr 发送时间： 2010-11-01 16:55:51 收件人： 黄亮 抄送： libvir-list@redhat.com 主题： Re: Re: SPAM-LOW: Re: Re: Node.GetInfo error Ok, if you are under windows (like me), use GitExtension (http://sourceforge.net/projects/gitextensions/) It works, not perfect, but it works. Arnaud From: 黄亮 Sent: Monday, November 01, 2010 9:52 AM To: arnaud.champion@devatom.fr Subject: Re: Re: SPAM-LOW: Re: Re: Node.GetInfo error Hi Arnaud, The NodeInfoStructure you sent to me yesterday works, thank you. I saw your patch file, should I manually apply it to the source code or is there some tools I can use to automatically apply the changes? Regards 2010-11-01 -------------------------------------------------------------------------------- Lancer -------------------------------------------------------------------------------- 发件人： arnaud.champion@devatom.fr 发送时间： 2010-11-01 16:37:17 收件人： 黄亮 抄送： libvir-list 主题： Re: SPAM-LOW: Re: Re: Node.GetInfo error Hi, I think the solution is in the last patches I have send (which are not yet in the git). Have you tried the NodeInfoStructure I have sended yesterday ? Arnaud From: 黄亮 Sent: Monday, November 01, 2010 3:01 AM To: arnaud.champion@devatom.fr Cc: libvir-list Subject: SPAM-LOW: Re: Re: Node.GetInfo error HI, I tried Errors.Error err = Errors.GetLastError(); MessageBox.Show(err.Message); But IDE shows compilation errors that there is no "Error" defination in "Errors", and "Errors.GetLastError()" returns int. I made a guess that maybe it was like this: Error err = Errors.SaveLastError(); MessageBox.Show("Get Info error: " + err.Message); It can be compiled but "err.Message" has nothing in it. Did I make a wrong assumption? Regards 2010-11-01 -------------------------------------------------------------------------------- Lancer -------------------------------------------------------------------------------- 发件人： arnaud.champion@devatom.fr 发送时间： 2010-10-31 16:48:15 收件人： 黄亮 抄送： libvir-list@redhat.com 主题： Re: Node.GetInfo error Ok, at first GetLastError return an Error object. So you should anything like : Errors.Error err = Errors.GetLastError(); MessageBox.Show(err.Message); For the NodeInfo structure, I think the problem is the same that was for DomainInfo, I'll check marshaling. Then respond you with the correct infos. Arnaud PS : can you also put libvirt-list@redhat.com in copy of your mails, to keep everyone in the loop ? From: 黄亮 Sent: Sunday, October 31, 2010 8:20 AM To: arnaud.champion Subject: Node.GetInfo error Hi, Sorry for disturbing again. But I get error while using Node.GetInfo. Code: NodeInfo aNodeInfo = new NodeInfo(); if (Node.GetInfo(con, aNodeInfo) < 0) { //MessageBox.Show("Node Info Error"); MessageBox.Show(Errors.GetLastError().ToString()); return 0f; } I'm sure con != IntPtr.Zero. I tried to use Errors.GetLastError(), it returns int. But I don't know what to do with it. So, any suggestions ? Thanks Regards 2010-10-31 -------------------------------------------------------------------------------- Lancer __________ Information from ESET Smart Security, version of virus signature database 5577 (20101030) __________ The message was checked by ESET Smart Security. http://www.eset.com __________ Information from ESET Smart Security, version of virus signature database 5580 (20101031) __________ The message was checked by ESET Smart Security. http://www.eset.com
I sometimes get a similar error with git patches from email, if I use Thunderbird to save them. Thunderbird spreads the header information into several lines, so I need to manually adjust that after saving, with a text editor. Maybe that's the problem here too? :) On 02/11/2010, at 3:00 AM, <arnaud.champion@devatom.fr> wrote:
:S I'm far away from a git expert :S
Maybe anyone on the list can help us ?
Arnaud
From: 黄亮 Sent: Monday, November 01, 2010 2:42 PM To: arnaud.champion@devatom.fr Subject: Re: Re: Re: SPAM-LOW: Re: Re: Node.GetInfo error
Hi Arnaud,
I tried GitExtension, but while applying patch, it returns "Patch format detection failed. "
Should I change some settings or is there something not right in the patch file?
Regards
2010-11-01 Lancer 发件人： arnaud.champion@devatom.fr 发送时间： 2010-11-01 16:55:51 收件人： 黄亮 抄送： libvir-list@redhat.com 主题： Re: Re: SPAM-LOW: Re: Re: Node.GetInfo error Ok,
if you are under windows (like me), use GitExtension (http://sourceforge.net/projects/gitextensions/) It works, not perfect, but it works.
Arnaud
From: 黄亮 Sent: Monday, November 01, 2010 9:52 AM To: arnaud.champion@devatom.fr Subject: Re: Re: SPAM-LOW: Re: Re: Node.GetInfo error
Hi Arnaud,
The NodeInfoStructure you sent to me yesterday works, thank you. I saw your patch file, should I manually apply it to the source code or is there some tools I can use to automatically apply the changes?
Regards
2010-11-01 Lancer 发件人： arnaud.champion@devatom.fr 发送时间： 2010-11-01 16:37:17 收件人： 黄亮 抄送： libvir-list 主题： Re: SPAM-LOW: Re: Re: Node.GetInfo error Hi, I think the solution is in the last patches I have send (which are not yet in the git). Have you tried the NodeInfoStructure I have sended yesterday ?
Arnaud
From: 黄亮 Sent: Monday, November 01, 2010 3:01 AM To: arnaud.champion@devatom.fr Cc: libvir-list Subject: SPAM-LOW: Re: Re: Node.GetInfo error
HI,
I tried
Errors.Error err = Errors.GetLastError(); MessageBox.Show(err.Message);
But IDE shows compilation errors that there is no "Error" defination in "Errors", and "Errors.GetLastError()" returns int. I made a guess that maybe it was like this:
Error err = Errors.SaveLastError(); MessageBox.Show("Get Info error: " + err.Message);
It can be compiled but "err.Message" has nothing in it.
Did I make a wrong assumption?
Regards
2010-11-01 Lancer 发件人： arnaud.champion@devatom.fr 发送时间： 2010-10-31 16:48:15 收件人： 黄亮 抄送： libvir-list@redhat.com 主题： Re: Node.GetInfo error Ok,
at first GetLastError return an Error object. So you should anything like :
Errors.Error err = Errors.GetLastError(); MessageBox.Show(err.Message);
For the NodeInfo structure, I think the problem is the same that was for DomainInfo, I'll check marshaling. Then respond you with the correct infos.
Arnaud
PS : can you also put libvirt-list@redhat.com in copy of your mails, to keep everyone in the loop ?
From: 黄亮 Sent: Sunday, October 31, 2010 8:20 AM To: arnaud.champion Subject: Node.GetInfo error
Hi,
Sorry for disturbing again. But I get error while using Node.GetInfo.
Code:
NodeInfo aNodeInfo = new NodeInfo(); if (Node.GetInfo(con, aNodeInfo) < 0) { //MessageBox.Show("Node Info Error"); MessageBox.Show(Errors.GetLastError().ToString()); return 0f; }
I'm sure con != IntPtr.Zero. I tried to use Errors.GetLastError(), it returns int. But I don't know what to do with it. So, any suggestions ? Thanks
Regards 2010-10-31 Lancer
__________ Information from ESET Smart Security, version of virus signature database 5577 (20101030) __________
The message was checked by ESET Smart Security.
__________ Information from ESET Smart Security, version of virus signature database 5580 (20101031) __________
The message was checked by ESET Smart Security.
http://www.eset.com -- libvir-list mailing list libvir-list@redhat.com https://www.redhat.com/mailman/listinfo/libvir-list
Ah, now I get what Arnaud meant in his other mail. For some reason the first line in his patches has ">" in front of the "From". Manually removing that ">" helps. Matthias 2010/11/1 <jclift@redhat.com>:
I sometimes get a similar error with git patches from email, if I use Thunderbird to save them. Thunderbird spreads the header information into several lines, so I need to manually adjust that after saving, with a text editor. Maybe that's the problem here too? :) On 02/11/2010, at 3:00 AM, <arnaud.champion@devatom.fr> wrote:
:S I'm far away from a git expert :S
Maybe anyone on the list can help us ?
Arnaud From: 黄亮 Sent: Monday, November 01, 2010 2:42 PM To: arnaud.champion@devatom.fr Subject: Re: Re: Re: SPAM-LOW: Re: Re: Node.GetInfo error Hi Arnaud,
I tried GitExtension, but while applying patch, it returns "Patch format detection failed. "
Should I change some settings or is there something not right in the patch file?
Regards
2010-11-01 ________________________________ Lancer ________________________________ 发件人： arnaud.champion@devatom.fr 发送时间： 2010-11-01 16:55:51 收件人： 黄亮 抄送： libvir-list@redhat.com 主题： Re: Re: SPAM-LOW: Re: Re: Node.GetInfo error Ok,
if you are under windows (like me), use GitExtension (http://sourceforge.net/projects/gitextensions/) It works, not perfect, but it works.
Arnaud From: 黄亮 Sent: Monday, November 01, 2010 9:52 AM To: arnaud.champion@devatom.fr Subject: Re: Re: SPAM-LOW: Re: Re: Node.GetInfo error Hi Arnaud,
The NodeInfoStructure you sent to me yesterday works, thank you. I saw your patch file, should I manually apply it to the source code or is there some tools I can use to automatically apply the changes?
Regards
2010-11-01 ________________________________ Lancer ________________________________ 发件人： arnaud.champion@devatom.fr 发送时间： 2010-11-01 16:37:17 收件人： 黄亮 抄送： libvir-list 主题： Re: SPAM-LOW: Re: Re: Node.GetInfo error Hi, I think the solution is in the last patches I have send (which are not yet in the git). Have you tried the NodeInfoStructure I have sended yesterday ?
Arnaud From: 黄亮 Sent: Monday, November 01, 2010 3:01 AM To: arnaud.champion@devatom.fr Cc: libvir-list Subject: SPAM-LOW: Re: Re: Node.GetInfo error HI,
I tried
Errors.Error err = Errors.GetLastError(); MessageBox.Show(err.Message);
But IDE shows compilation errors that there is no "Error" defination in "Errors", and "Errors.GetLastError()" returns int. I made a guess that maybe it was like this:
Error err = Errors.SaveLastError(); MessageBox.Show("Get Info error: " + err.Message);
It can be compiled but "err.Message" has nothing in it.
Did I make a wrong assumption?
Regards
2010-11-01 ________________________________ Lancer ________________________________ 发件人： arnaud.champion@devatom.fr 发送时间： 2010-10-31 16:48:15 收件人： 黄亮 抄送： libvir-list@redhat.com 主题： Re: Node.GetInfo error Ok,
at first GetLastError return an Error object. So you should anything like :
Errors.Error err = Errors.GetLastError(); MessageBox.Show(err.Message);
For the NodeInfo structure, I think the problem is the same that was for DomainInfo, I'll check marshaling. Then respond you with the correct infos.
Arnaud
PS : can you also put libvirt-list@redhat.com in copy of your mails, to keep everyone in the loop ? From: 黄亮 Sent: Sunday, October 31, 2010 8:20 AM To: arnaud.champion Subject: Node.GetInfo error Hi,
Sorry for disturbing again. But I get error while using Node.GetInfo.
Code:
NodeInfo aNodeInfo = new NodeInfo(); if (Node.GetInfo(con, aNodeInfo) < 0) { //MessageBox.Show("Node Info Error"); MessageBox.Show(Errors.GetLastError().ToString()); return 0f; }
I'm sure con != IntPtr.Zero. I tried to use Errors.GetLastError(), it returns int. But I don't know what to do with it. So, any suggestions ? Thanks
Regards 2010-10-31 ________________________________ Lancer
__________ Information from ESET Smart Security, version of virus signature database 5577 (20101030) __________
The message was checked by ESET Smart Security.
__________ Information from ESET Smart Security, version of virus signature database 5580 (20101031) __________
The message was checked by ESET Smart Security.
-- libvir-list mailing list libvir-list@redhat.com https://www.redhat.com/mailman/listinfo/libvir-list
-- libvir-list mailing list libvir-list@redhat.com https://www.redhat.com/mailman/listinfo/libvir-list
Well, I removed the ">", and yes it goes a few steps further but it still fail to apply the error msg is : fatal: sha1 information is lacking or useless (Domain.cs). Repository lacks necessary blobs to fall back on 3-way merge. Cannot fall back to three-way merge. so what can I do? Regards 2010-11-02 Lancer 发件人： Matthias Bolte 发送时间： 2010-11-02 04:12:50 收件人： jclift 抄送： arnaud.champion; libvir-list; lancerhuang 主题： Re: [libvirt] SPAM-LOW: Re: Re: Node.GetInfo error Ah, now I get what Arnaud meant in his other mail. For some reason the first line in his patches has ">" in front of the "From". Manually removing that ">" helps. Matthias 2010/11/1 <jclift@redhat.com>:
I sometimes get a similar error with git patches from email, if I use Thunderbird to save them. Thunderbird spreads the header information into several lines, so I need to manually adjust that after saving, with a text editor. Maybe that's the problem here too? :) On 02/11/2010, at 3:00 AM, <arnaud.champion@devatom.fr> wrote:
:S I'm far away from a git expert :S
Maybe anyone on the list can help us ?
Arnaud From: 黄亮 Sent: Monday, November 01, 2010 2:42 PM To: arnaud.champion@devatom.fr Subject: Re: Re: Re: SPAM-LOW: Re: Re: Node.GetInfo error Hi Arnaud,
I tried GitExtension, but while applying patch, it returns "Patch format detection failed. "
Should I change some settings or is there something not right in the patch file?
Regards
2010-11-01 ________________________________ Lancer ________________________________ 发件人： arnaud.champion@devatom.fr 发送时间： 2010-11-01 16:55:51 收件人： 黄亮 抄送： libvir-list@redhat.com 主题： Re: Re: SPAM-LOW: Re: Re: Node.GetInfo error Ok,
if you are under windows (like me), use GitExtension (http://sourceforge.net/projects/gitextensions/) It works, not perfect, but it works.
Arnaud From: 黄亮 Sent: Monday, November 01, 2010 9:52 AM To: arnaud.champion@devatom.fr Subject: Re: Re: SPAM-LOW: Re: Re: Node.GetInfo error Hi Arnaud,
The NodeInfoStructure you sent to me yesterday works, thank you. I saw your patch file, should I manually apply it to the source code or is there some tools I can use to automatically apply the changes?
Regards
2010-11-01 ________________________________ Lancer ________________________________ 发件人： arnaud.champion@devatom.fr 发送时间： 2010-11-01 16:37:17 收件人： 黄亮 抄送： libvir-list 主题： Re: SPAM-LOW: Re: Re: Node.GetInfo error Hi, I think the solution is in the last patches I have send (which are not yet in the git). Have you tried the NodeInfoStructure I have sended yesterday ?
Arnaud From: 黄亮 Sent: Monday, November 01, 2010 3:01 AM To: arnaud.champion@devatom.fr Cc: libvir-list Subject: SPAM-LOW: Re: Re: Node.GetInfo error HI,
I tried
Errors.Error err = Errors.GetLastError(); MessageBox.Show(err.Message);
But IDE shows compilation errors that there is no "Error" defination in "Errors", and "Errors.GetLastError()" returns int. I made a guess that maybe it was like this:
Error err = Errors.SaveLastError(); MessageBox.Show("Get Info error: " + err.Message);
It can be compiled but "err.Message" has nothing in it.
Did I make a wrong assumption?
Regards
2010-11-01 ________________________________ Lancer ________________________________ 发件人： arnaud.champion@devatom.fr 发送时间： 2010-10-31 16:48:15 收件人： 黄亮 抄送： libvir-list@redhat.com 主题： Re: Node.GetInfo error Ok,
at first GetLastError return an Error object. So you should anything like :
Errors.Error err = Errors.GetLastError(); MessageBox.Show(err.Message);
For the NodeInfo structure, I think the problem is the same that was for DomainInfo, I'll check marshaling. Then respond you with the correct infos.
Arnaud
PS : can you also put libvirt-list@redhat.com in copy of your mails, to keep everyone in the loop ? From: 黄亮 Sent: Sunday, October 31, 2010 8:20 AM To: arnaud.champion Subject: Node.GetInfo error Hi,
Sorry for disturbing again. But I get error while using Node.GetInfo.
Code:
NodeInfo aNodeInfo = new NodeInfo(); if (Node.GetInfo(con, aNodeInfo) < 0) { //MessageBox.Show("Node Info Error"); MessageBox.Show(Errors.GetLastError().ToString()); return 0f; }
I'm sure con != IntPtr.Zero. I tried to use Errors.GetLastError(), it returns int. But I don't know what to do with it. So, any suggestions ? Thanks
Regards 2010-10-31 ________________________________ Lancer
__________ Information from ESET Smart Security, version of virus signature database 5577 (20101030) __________
The message was checked by ESET Smart Security.
__________ Information from ESET Smart Security, version of virus signature database 5580 (20101031) __________
The message was checked by ESET Smart Security.
-- libvir-list mailing list libvir-list@redhat.com https://www.redhat.com/mailman/listinfo/libvir-list
-- libvir-list mailing list libvir-list@redhat.com https://www.redhat.com/mailman/listinfo/libvir-list
__________ Information from ESET Smart Security, version of virus signature database 5583 (20101101) __________ The message was checked by ESET Smart Security. http://www.eset.com
:S Can't you help you here... I hope the patches will be in the git today... Arnaud From: 黄亮 Sent: Tuesday, November 02, 2010 2:32 AM To: Matthias Bolte ; jclift Cc: arnaud.champion ; libvir-list Subject: SPAM-LOW: Re: Re: [libvirt] SPAM-LOW: Re: Re: Node.GetInfo error Well, I removed the ">", and yes it goes a few steps further but it still fail to apply the error msg is : fatal: sha1 information is lacking or useless (Domain.cs). Repository lacks necessary blobs to fall back on 3-way merge. Cannot fall back to three-way merge. so what can I do? Regards 2010-11-02 -------------------------------------------------------------------------------- Lancer -------------------------------------------------------------------------------- 发件人： Matthias Bolte 发送时间： 2010-11-02 04:12:50 收件人： jclift 抄送： arnaud.champion; libvir-list; lancerhuang 主题： Re: [libvirt] SPAM-LOW: Re: Re: Node.GetInfo error Ah, now I get what Arnaud meant in his other mail. For some reason the first line in his patches has ">" in front of the "From". Manually removing that ">" helps. Matthias 2010/11/1 <jclift@redhat.com>:
I sometimes get a similar error with git patches from email, if I use Thunderbird to save them. Thunderbird spreads the header information into several lines, so I need to manually adjust that after saving, with a text editor. Maybe that's the problem here too? :) On 02/11/2010, at 3:00 AM, <arnaud.champion@devatom.fr> wrote:
:S I'm far away from a git expert :S
Maybe anyone on the list can help us ?
Arnaud From: 黄亮 Sent: Monday, November 01, 2010 2:42 PM To: arnaud.champion@devatom.fr Subject: Re: Re: Re: SPAM-LOW: Re: Re: Node.GetInfo error Hi Arnaud,
I tried GitExtension, but while applying patch, it returns "Patch format detection failed. "
Should I change some settings or is there something not right in the patch file?
Regards
2010-11-01 ________________________________ Lancer ________________________________ 发件人： arnaud.champion@devatom.fr 发送时间： 2010-11-01 16:55:51 收件人： 黄亮 抄送： libvir-list@redhat.com 主题： Re: Re: SPAM-LOW: Re: Re: Node.GetInfo error Ok,
if you are under windows (like me), use GitExtension (http://sourceforge.net/projects/gitextensions/) It works, not perfect, but it works.
Arnaud From: 黄亮 Sent: Monday, November 01, 2010 9:52 AM To: arnaud.champion@devatom.fr Subject: Re: Re: SPAM-LOW: Re: Re: Node.GetInfo error Hi Arnaud,
The NodeInfoStructure you sent to me yesterday works, thank you. I saw your patch file, should I manually apply it to the source code or is there some tools I can use to automatically apply the changes?
Regards
2010-11-01 ________________________________ Lancer ________________________________ 发件人： arnaud.champion@devatom.fr 发送时间： 2010-11-01 16:37:17 收件人： 黄亮 抄送： libvir-list 主题： Re: SPAM-LOW: Re: Re: Node.GetInfo error Hi, I think the solution is in the last patches I have send (which are not yet in the git). Have you tried the NodeInfoStructure I have sended yesterday ?
Arnaud From: 黄亮 Sent: Monday, November 01, 2010 3:01 AM To: arnaud.champion@devatom.fr Cc: libvir-list Subject: SPAM-LOW: Re: Re: Node.GetInfo error HI,
I tried
Errors.Error err = Errors.GetLastError(); MessageBox.Show(err.Message);
But IDE shows compilation errors that there is no "Error" defination in "Errors", and "Errors.GetLastError()" returns int. I made a guess that maybe it was like this:
Error err = Errors.SaveLastError(); MessageBox.Show("Get Info error: " + err.Message);
It can be compiled but "err.Message" has nothing in it.
Did I make a wrong assumption?
Regards
2010-11-01 ________________________________ Lancer ________________________________ 发件人： arnaud.champion@devatom.fr 发送时间： 2010-10-31 16:48:15 收件人： 黄亮 抄送： libvir-list@redhat.com 主题： Re: Node.GetInfo error Ok,
at first GetLastError return an Error object. So you should anything like :
Errors.Error err = Errors.GetLastError(); MessageBox.Show(err.Message);
For the NodeInfo structure, I think the problem is the same that was for DomainInfo, I'll check marshaling. Then respond you with the correct infos.
Arnaud
PS : can you also put libvirt-list@redhat.com in copy of your mails, to keep everyone in the loop ? From: 黄亮 Sent: Sunday, October 31, 2010 8:20 AM To: arnaud.champion Subject: Node.GetInfo error Hi,
Sorry for disturbing again. But I get error while using Node.GetInfo.
Code:
NodeInfo aNodeInfo = new NodeInfo(); if (Node.GetInfo(con, aNodeInfo) < 0) { //MessageBox.Show("Node Info Error"); MessageBox.Show(Errors.GetLastError().ToString()); return 0f; }
I'm sure con != IntPtr.Zero. I tried to use Errors.GetLastError(), it returns int. But I don't know what to do with it. So, any suggestions ? Thanks
Regards 2010-10-31 ________________________________ Lancer
__________ Information from ESET Smart Security, version of virus signature database 5577 (20101030) __________
The message was checked by ESET Smart Security.
__________ Information from ESET Smart Security, version of virus signature database 5580 (20101031) __________
The message was checked by ESET Smart Security.
-- libvir-list mailing list libvir-list@redhat.com https://www.redhat.com/mailman/listinfo/libvir-list
-- libvir-list mailing list libvir-list@redhat.com https://www.redhat.com/mailman/listinfo/libvir-list
__________ Information from ESET Smart Security, version of virus signature database 5583 (20101101) __________ The message was checked by ESET Smart Security. http://www.eset.com
Maybe this is because DOmain.cs has been modified :S From: 黄亮 Sent: Tuesday, November 02, 2010 2:32 AM To: Matthias Bolte ; jclift Cc: arnaud.champion ; libvir-list Subject: SPAM-LOW: Re: Re: [libvirt] SPAM-LOW: Re: Re: Node.GetInfo error Well, I removed the ">", and yes it goes a few steps further but it still fail to apply the error msg is : fatal: sha1 information is lacking or useless (Domain.cs). Repository lacks necessary blobs to fall back on 3-way merge. Cannot fall back to three-way merge. so what can I do? Regards 2010-11-02 -------------------------------------------------------------------------------- Lancer -------------------------------------------------------------------------------- 发件人： Matthias Bolte 发送时间： 2010-11-02 04:12:50 收件人： jclift 抄送： arnaud.champion; libvir-list; lancerhuang 主题： Re: [libvirt] SPAM-LOW: Re: Re: Node.GetInfo error Ah, now I get what Arnaud meant in his other mail. For some reason the first line in his patches has ">" in front of the "From". Manually removing that ">" helps. Matthias 2010/11/1 <jclift@redhat.com>:
I sometimes get a similar error with git patches from email, if I use Thunderbird to save them. Thunderbird spreads the header information into several lines, so I need to manually adjust that after saving, with a text editor. Maybe that's the problem here too? :) On 02/11/2010, at 3:00 AM, <arnaud.champion@devatom.fr> wrote:
:S I'm far away from a git expert :S
Maybe anyone on the list can help us ?
Arnaud From: 黄亮 Sent: Monday, November 01, 2010 2:42 PM To: arnaud.champion@devatom.fr Subject: Re: Re: Re: SPAM-LOW: Re: Re: Node.GetInfo error Hi Arnaud,
I tried GitExtension, but while applying patch, it returns "Patch format detection failed. "
Should I change some settings or is there something not right in the patch file?
Regards
2010-11-01 ________________________________ Lancer ________________________________ 发件人： arnaud.champion@devatom.fr 发送时间： 2010-11-01 16:55:51 收件人： 黄亮 抄送： libvir-list@redhat.com 主题： Re: Re: SPAM-LOW: Re: Re: Node.GetInfo error Ok,
if you are under windows (like me), use GitExtension (http://sourceforge.net/projects/gitextensions/) It works, not perfect, but it works.
Arnaud From: 黄亮 Sent: Monday, November 01, 2010 9:52 AM To: arnaud.champion@devatom.fr Subject: Re: Re: SPAM-LOW: Re: Re: Node.GetInfo error Hi Arnaud,
The NodeInfoStructure you sent to me yesterday works, thank you. I saw your patch file, should I manually apply it to the source code or is there some tools I can use to automatically apply the changes?
Regards
2010-11-01 ________________________________ Lancer ________________________________ 发件人： arnaud.champion@devatom.fr 发送时间： 2010-11-01 16:37:17 收件人： 黄亮 抄送： libvir-list 主题： Re: SPAM-LOW: Re: Re: Node.GetInfo error Hi, I think the solution is in the last patches I have send (which are not yet in the git). Have you tried the NodeInfoStructure I have sended yesterday ?
Arnaud From: 黄亮 Sent: Monday, November 01, 2010 3:01 AM To: arnaud.champion@devatom.fr Cc: libvir-list Subject: SPAM-LOW: Re: Re: Node.GetInfo error HI,
I tried
Errors.Error err = Errors.GetLastError(); MessageBox.Show(err.Message);
But IDE shows compilation errors that there is no "Error" defination in "Errors", and "Errors.GetLastError()" returns int. I made a guess that maybe it was like this:
Error err = Errors.SaveLastError(); MessageBox.Show("Get Info error: " + err.Message);
It can be compiled but "err.Message" has nothing in it.
Did I make a wrong assumption?
Regards
2010-11-01 ________________________________ Lancer ________________________________ 发件人： arnaud.champion@devatom.fr 发送时间： 2010-10-31 16:48:15 收件人： 黄亮 抄送： libvir-list@redhat.com 主题： Re: Node.GetInfo error Ok,
at first GetLastError return an Error object. So you should anything like :
Errors.Error err = Errors.GetLastError(); MessageBox.Show(err.Message);
For the NodeInfo structure, I think the problem is the same that was for DomainInfo, I'll check marshaling. Then respond you with the correct infos.
Arnaud
PS : can you also put libvirt-list@redhat.com in copy of your mails, to keep everyone in the loop ? From: 黄亮 Sent: Sunday, October 31, 2010 8:20 AM To: arnaud.champion Subject: Node.GetInfo error Hi,
Sorry for disturbing again. But I get error while using Node.GetInfo.
Code:
NodeInfo aNodeInfo = new NodeInfo(); if (Node.GetInfo(con, aNodeInfo) < 0) { //MessageBox.Show("Node Info Error"); MessageBox.Show(Errors.GetLastError().ToString()); return 0f; }
I'm sure con != IntPtr.Zero. I tried to use Errors.GetLastError(), it returns int. But I don't know what to do with it. So, any suggestions ? Thanks
Regards 2010-10-31 ________________________________ Lancer
__________ Information from ESET Smart Security, version of virus signature database 5577 (20101030) __________
The message was checked by ESET Smart Security.
__________ Information from ESET Smart Security, version of virus signature database 5580 (20101031) __________
The message was checked by ESET Smart Security.
-- libvir-list mailing list libvir-list@redhat.com https://www.redhat.com/mailman/listinfo/libvir-list
-- libvir-list mailing list libvir-list@redhat.com https://www.redhat.com/mailman/listinfo/libvir-list
__________ Information from ESET Smart Security, version of virus signature database 5583 (20101101) __________ The message was checked by ESET Smart Security. http://www.eset.com
Hi Lancer, As a general thought, it still looks like there's a problem with the way the patch is getting saved by your email client. It *might* work, if Arnaud was to email the patch to you as a file, which your email client shouldn't (in theory) break when it saves. However, it might just be easier in this case to wait until his patches are reviewed, then added to the main git repository. It shouldn't be able to go wrong that way. :) Regards and best wishes, Justin Clift On 11/02/2010 12:32 PM, 黄亮 wrote:
Well, I removed the ">", and yes it goes a few steps further but it still fail to apply the error msg is :
fatal: sha1 information is lacking or useless (Domain.cs). Repository lacks necessary blobs to fall back on 3-way merge. Cannot fall back to three-way merge.
so what can I do?
Regards
2010-11-02 Lancer
Hi Justin Ok, I'll just wait until its pushed :-) Thank you for your reply 2010-11-02 Lancer 发件人： Justin Clift 发送时间： 2010-11-02 15:59:41 收件人： 黄亮 抄送： libvir-list 主题： Re: [libvirt] SPAM-LOW: Re: Re: Node.GetInfo error Hi Lancer, As a general thought, it still looks like there's a problem with the way the patch is getting saved by your email client. It *might* work, if Arnaud was to email the patch to you as a file, which your email client shouldn't (in theory) break when it saves. However, it might just be easier in this case to wait until his patches are reviewed, then added to the main git repository. It shouldn't be able to go wrong that way. :) Regards and best wishes, Justin Clift On 11/02/2010 12:32 PM, 黄亮 wrote:
Well, I removed the ">", and yes it goes a few steps further but it still fail to apply the error msg is :
fatal: sha1 information is lacking or useless (Domain.cs). Repository lacks necessary blobs to fall back on 3-way merge. Cannot fall back to three-way merge.
so what can I do?
Regards
2010-11-02 Lancer
__________ Information from ESET Smart Security, version of virus signature database 5583 (20101101) __________ The message was checked by ESET Smart Security. http://www.eset.com
participants (5)
-
arnaud.champion＠devatom.fr -
jclift＠redhat.com -
Justin Clift
-
Matthias Bolte -
黄亮