[libvirt] "Connection does not support host device enumeration"
Hi, I have "20:04.0 Network controller: Sangoma Technologies Corp. A104d QUAD T1/E1 AFT card" on Host OS, Its not visible on guest OS using linux KVM application. I did open the window for guest from virt-manager on my Ubuntu Linux Desktop 11.04, shut down the guest, then select the "Details" view from the menu on that window, and click "Add Hardware" at the bottom, select "PCI Host Device" in the selections on the left, and find your device in the list of host devices on the right. Then click "Finish". Finally, start your guest up again, and the device should appear. I get "Connection does not support host device enumeration" Any clue ? libvirt-0.8.2-22.el5 version running on CentOS Linux Server version 5.6 Please let me know if you need any additional information Regards, Kaushal
On Thu, Sep 22, 2011 at 9:41 AM, Osier Yang <jyang@redhat.com> wrote:
于 2011年09月22日 09:11, Kaushal Shriyan 写道:
does not support host device enumeration
Seems your libvirt is compiled without --with-hal and --with-udev
Regards Osier
Hi Osier Thanks for the reply. Please let me know how do i enable this feature since its a binary package installed on CentOS 5.6 x86_64 architecture. Regards Kaushal
于 2011年09月22日 12:41, Kaushal Shriyan 写道:
On Thu, Sep 22, 2011 at 9:41 AM, Osier Yang <jyang@redhat.com> wrote:
于 2011年09月22日 09:11, Kaushal Shriyan 写道:
does not support host device enumeration Seems your libvirt is compiled without --with-hal and --with-udev
Regards Osier
Hi Osier
Thanks for the reply. Please let me know how do i enable this feature since its a binary package installed on CentOS 5.6 x86_64 architecture.
You need to re-compile from the source if that's true. http://libvirt.org/compiling.html Regards, Osier
? 2011?09?22? 12:46, Osier Yang ??:
? 2011?09?22? 12:41, Kaushal Shriyan ??:
On Thu, Sep 22, 2011 at 9:41 AM, Osier Yang<jyang@redhat.com> wrote:
? 2011?09?22? 09:11, Kaushal Shriyan ??:
does not support host device enumeration Seems your libvirt is compiled without --with-hal and --with-udev
Regards Osier
Hi Osier
Thanks for the reply. Please let me know how do i enable this feature since its a binary package installed on CentOS 5.6 x86_64 architecture.
You need to re-compile from the source if that's true.
To make sure get your wanted, specifying --with-hal/--with-udev explicitly with "yes" will help.
Regards, Osier
-- libvir-list mailing list libvir-list@redhat.com https://www.redhat.com/mailman/listinfo/libvir-list
Hi Osier Can you please point me to the rpm version which has hal and udev flags enabled by default for CentOS 5.6 ? Regards Kaushal On Thu, Sep 22, 2011 at 10:22 AM, Osier Yang <jyang@redhat.com> wrote:
于 2011年09月22日 12:46, Osier Yang 写道:
于 2011年09月22日 12:41, Kaushal Shriyan 写道:
On Thu, Sep 22, 2011 at 9:41 AM, Osier Yang <jyang@redhat.com> wrote:
于 2011年09月22日 09:11, Kaushal Shriyan 写道:
does not support host device enumeration
Seems your libvirt is compiled without --with-hal and --with-udev
Regards Osier
Hi Osier
Thanks for the reply. Please let me know how do i enable this feature since its a binary package installed on CentOS 5.6 x86_64 architecture.
You need to re-compile from the source if that's true.
http://libvirt.org/compiling.html
To make sure get your wanted, specifying --with-hal/--with-udev explicitly with "yes" will help.
Regards, Osier
-- libvir-list mailing list libvir-list@redhat.com https://www.redhat.com/mailman/listinfo/libvir-list
于 2011年09月27日 01:13, Kaushal Shriyan 写道: Hi, Kaushal I don't use CentOS, so don't known it, though I guess it's the intention or mistake of the packager. you can compile from the source code youself. # rpm -qi libvirt You will see the version you use currently, and get the same source tarball fromhttp://libvirt.org/sources/ to compile. Of course, you can download newer source to compile, but it may also need newer dependency packages. So compiling from the same version is the easiest way. :-) If you really don't want to compile yourself, just file a bug to CentOS, guess the packger will help you do it. Regards, Osier
Hi Osier
Can you please point me to the rpm version which has hal and udev flags enabled by default for CentOS 5.6 ?
Regards
Kaushal
On Thu, Sep 22, 2011 at 10:22 AM, Osier Yang <jyang@redhat.com> wrote:
于 2011年09月22日 12:46, Osier Yang 写道:
于 2011年09月22日 12:41, Kaushal Shriyan 写道:
On Thu, Sep 22, 2011 at 9:41 AM, Osier Yang <jyang@redhat.com> wrote:
于 2011年09月22日 09:11, Kaushal Shriyan 写道:
does not support host device enumeration
Seems your libvirt is compiled without --with-hal and --with-udev
Regards Osier
Hi Osier
Thanks for the reply. Please let me know how do i enable this feature since its a binary package installed on CentOS 5.6 x86_64 architecture.
You need to re-compile from the source if that's true.
http://libvirt.org/compiling.html
To make sure get your wanted, specifying --with-hal/--with-udev explicitly with "yes" will help.
Regards, Osier
-- libvir-list mailing list libvir-list@redhat.com https://www.redhat.com/mailman/listinfo/libvir-list
2011/9/27 Osier Yang <jyang@redhat.com>:
于 2011年09月27日 01:13, Kaushal Shriyan 写道:
Hi, Kaushal
I don't use CentOS, so don't known it, though I guess it's the intention or mistake of the packager.
you can compile from the source code youself.
# rpm -qi libvirt
You will see the version you use currently, and get the same source tarball from http://libvirt.org/sources/ to compile.
Of course, you can download newer source to compile, but it may also need newer dependency packages. So compiling from the same version is the easiest way. :-)
If you really don't want to compile yourself, just file a bug to CentOS, guess the packger will help you do it.
Regards, Osier
Hi Osier
Can you please point me to the rpm version which has hal and udev flags enabled by default for CentOS 5.6 ?
Regards
Kaushal
On Thu, Sep 22, 2011 at 10:22 AM, Osier Yang <jyang@redhat.com> wrote:
于 2011年09月22日 12:46, Osier Yang 写道:
于 2011年09月22日 12:41, Kaushal Shriyan 写道:
On Thu, Sep 22, 2011 at 9:41 AM, Osier Yang <jyang@redhat.com> wrote:
于 2011年09月22日 09:11, Kaushal Shriyan 写道:
does not support host device enumeration
Seems your libvirt is compiled without --with-hal and --with-udev
Regards Osier
Hi Osier
Thanks for the reply. Please let me know how do i enable this feature since its a binary package installed on CentOS 5.6 x86_64 architecture.
You need to re-compile from the source if that's true.
http://libvirt.org/compiling.html
To make sure get your wanted, specifying --with-hal/--with-udev explicitly with "yes" will help.
Regards, Osier
-- libvir-list mailing list libvir-list@redhat.com https://www.redhat.com/mailman/listinfo/libvir-list
Hi Osier, Is there libudev-devel or udev-devel package available on CentOS 5.6 ? [root@~]# yum search udev-devel Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile * base: centos.aol.in * extras: centos.aol.in * updates: centos.aol.in base | 1.1 kB 00:00 extras | 2.1 kB 00:00 updates | 1.9 kB 00:00 Warning: No matches found for: udev-devel No Matches found [root@~]# yum search libudev-devel Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile * base: centos.aol.in * extras: centos.aol.in * updates: centos.aol.in Warning: No matches found for: libudev-devel No Matches found [root@~]# Please suggest further and also it seems like this package is not available in CentOS 5.6 Regards Kaushal
2011/9/29 Kaushal Shriyan <kaushalshriyan@gmail.com>:
2011/9/27 Osier Yang <jyang@redhat.com>:
于 2011年09月27日 01:13, Kaushal Shriyan 写道:
Hi, Kaushal
I don't use CentOS, so don't known it, though I guess it's the intention or mistake of the packager.
you can compile from the source code youself.
# rpm -qi libvirt
You will see the version you use currently, and get the same source tarball from http://libvirt.org/sources/ to compile.
Of course, you can download newer source to compile, but it may also need newer dependency packages. So compiling from the same version is the easiest way. :-)
If you really don't want to compile yourself, just file a bug to CentOS, guess the packger will help you do it.
Regards, Osier
Hi Osier
Can you please point me to the rpm version which has hal and udev flags enabled by default for CentOS 5.6 ?
Regards
Kaushal
On Thu, Sep 22, 2011 at 10:22 AM, Osier Yang <jyang@redhat.com> wrote:
于 2011年09月22日 12:46, Osier Yang 写道:
于 2011年09月22日 12:41, Kaushal Shriyan 写道:
On Thu, Sep 22, 2011 at 9:41 AM, Osier Yang <jyang@redhat.com> wrote:
于 2011年09月22日 09:11, Kaushal Shriyan 写道:
does not support host device enumeration
Seems your libvirt is compiled without --with-hal and --with-udev
Regards Osier
Hi Osier
Thanks for the reply. Please let me know how do i enable this feature since its a binary package installed on CentOS 5.6 x86_64 architecture.
You need to re-compile from the source if that's true.
http://libvirt.org/compiling.html
To make sure get your wanted, specifying --with-hal/--with-udev explicitly with "yes" will help.
Regards, Osier
-- libvir-list mailing list libvir-list@redhat.com https://www.redhat.com/mailman/listinfo/libvir-list
Hi Osier,
Is there libudev-devel or udev-devel package available on CentOS 5.6 ?
[root@~]# yum search udev-devel Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile * base: centos.aol.in * extras: centos.aol.in * updates: centos.aol.in base
| 1.1 kB 00:00 extras
| 2.1 kB 00:00 updates
| 1.9 kB 00:00 Warning: No matches found for: udev-devel No Matches found [root@~]# yum search libudev-devel Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile * base: centos.aol.in * extras: centos.aol.in * updates: centos.aol.in Warning: No matches found for: libudev-devel No Matches found [root@~]#
Please suggest further and also it seems like this package is not available in CentOS 5.6
Regards
Kaushal
Hi, Please suggest/comment on my earlier post to this mailing list. Regards Kaushal
2011/10/1 Kaushal Shriyan <kaushalshriyan@gmail.com>:
2011/9/29 Kaushal Shriyan <kaushalshriyan@gmail.com>:
2011/9/27 Osier Yang <jyang@redhat.com>:
于 2011年09月27日 01:13, Kaushal Shriyan 写道:
Hi, Kaushal
I don't use CentOS, so don't known it, though I guess it's the intention or mistake of the packager.
you can compile from the source code youself.
# rpm -qi libvirt
You will see the version you use currently, and get the same source tarball from http://libvirt.org/sources/ to compile.
Of course, you can download newer source to compile, but it may also need newer dependency packages. So compiling from the same version is the easiest way. :-)
If you really don't want to compile yourself, just file a bug to CentOS, guess the packger will help you do it.
Regards, Osier
Hi Osier
Can you please point me to the rpm version which has hal and udev flags enabled by default for CentOS 5.6 ?
Regards
Kaushal
On Thu, Sep 22, 2011 at 10:22 AM, Osier Yang <jyang@redhat.com> wrote:
于 2011年09月22日 12:46, Osier Yang 写道:
于 2011年09月22日 12:41, Kaushal Shriyan 写道:
On Thu, Sep 22, 2011 at 9:41 AM, Osier Yang <jyang@redhat.com> wrote:
于 2011年09月22日 09:11, Kaushal Shriyan 写道:
does not support host device enumeration
Seems your libvirt is compiled without --with-hal and --with-udev
Regards Osier
Hi Osier
Thanks for the reply. Please let me know how do i enable this feature since its a binary package installed on CentOS 5.6 x86_64 architecture.
You need to re-compile from the source if that's true.
http://libvirt.org/compiling.html
To make sure get your wanted, specifying --with-hal/--with-udev explicitly with "yes" will help.
Regards, Osier
-- libvir-list mailing list libvir-list@redhat.com https://www.redhat.com/mailman/listinfo/libvir-list
Hi Osier,
Is there libudev-devel or udev-devel package available on CentOS 5.6 ?
[root@~]# yum search udev-devel Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile * base: centos.aol.in * extras: centos.aol.in * updates: centos.aol.in base
| 1.1 kB 00:00 extras
| 2.1 kB 00:00 updates
| 1.9 kB 00:00 Warning: No matches found for: udev-devel No Matches found [root@~]# yum search libudev-devel Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile * base: centos.aol.in * extras: centos.aol.in * updates: centos.aol.in Warning: No matches found for: libudev-devel No Matches found [root@~]#
Please suggest further and also it seems like this package is not available in CentOS 5.6
Regards
Kaushal
Hi,
Please suggest/comment on my earlier post to this mailing list.
Regards
Kaushal
Hi Osier, Checking in again. Please suggest/comment on my earlier post to this mailing list. Regards, Kaushal
On Wed, Oct 05, 2011 at 04:10:07AM +0530, Kaushal Shriyan wrote:
2011/10/1 Kaushal Shriyan <kaushalshriyan@gmail.com>:
2011/9/29 Kaushal Shriyan <kaushalshriyan@gmail.com>:
2011/9/27 Osier Yang <jyang@redhat.com>:
于 2011年09月27日 01:13, Kaushal Shriyan 写道:
Hi, Kaushal
I don't use CentOS, so don't known it, though I guess it's the intention or mistake of the packager.
you can compile from the source code youself.
# rpm -qi libvirt
You will see the version you use currently, and get the same source tarball from http://libvirt.org/sources/ to compile.
Of course, you can download newer source to compile, but it may also need newer dependency packages. So compiling from the same version is the easiest way. :-)
If you really don't want to compile yourself, just file a bug to CentOS, guess the packger will help you do it.
Regards, Osier
Hi Osier
Can you please point me to the rpm version which has hal and udev flags enabled by default for CentOS 5.6 ?
Regards
Kaushal
On Thu, Sep 22, 2011 at 10:22 AM, Osier Yang <jyang@redhat.com> wrote:
于 2011年09月22日 12:46, Osier Yang 写道:
于 2011年09月22日 12:41, Kaushal Shriyan 写道:
On Thu, Sep 22, 2011 at 9:41 AM, Osier Yang <jyang@redhat.com> wrote:
于 2011年09月22日 09:11, Kaushal Shriyan 写道:
does not support host device enumeration
Seems your libvirt is compiled without --with-hal and --with-udev
Regards Osier
Hi Osier
Thanks for the reply. Please let me know how do i enable this feature since its a binary package installed on CentOS 5.6 x86_64 architecture.
You need to re-compile from the source if that's true.
http://libvirt.org/compiling.html
To make sure get your wanted, specifying --with-hal/--with-udev explicitly with "yes" will help.
Regards, Osier
-- libvir-list mailing list libvir-list@redhat.com https://www.redhat.com/mailman/listinfo/libvir-list
Hi Osier,
Is there libudev-devel or udev-devel package available on CentOS 5.6 ?
[root@~]# yum search udev-devel Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile * base: centos.aol.in * extras: centos.aol.in * updates: centos.aol.in base
| 1.1 kB 00:00 extras
| 2.1 kB 00:00 updates
| 1.9 kB 00:00 Warning: No matches found for: udev-devel No Matches found [root@~]# yum search libudev-devel Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile * base: centos.aol.in * extras: centos.aol.in * updates: centos.aol.in Warning: No matches found for: libudev-devel No Matches found [root@~]#
Please suggest further and also it seems like this package is not available in CentOS 5.6
Regards
Kaushal
Hi,
Please suggest/comment on my earlier post to this mailing list.
Regards
Kaushal
Hi Osier,
Checking in again. Please suggest/comment on my earlier post to this mailing list.
You need to read his advice to you carefully: you need either hal or udev; you're using Centos 5.x, so you need hal. Dave
participants (3)
-
Dave Allan -
Kaushal Shriyan -
Osier Yang