[libvirt] [PATCH v6 02/17] qemu: new functions to calculate/set device pciConnectFlags

The lowest level function of this trio (qemuDomainDeviceCalculatePCIConnectFlags()) aims to be the single authority for the virDomainPCIConnectFlags to use for any given device using a particular arch/machinetype/qemu-binary. qemuDomainFillDevicePCIConnectFlags() sets info->pciConnectFlags in a single device (unless it has no virDomainDeviceInfo, in which case it's a NOP). qemuDomainFillAllPCIConnectFlags() sets info->pciConnectFlags in all devices that have a virDomainDeviceInfo The latter two functions aren't called anywhere yet. This commit is just making them available. Later patches will replace all the current hodge-podge of flag settings with calls to this single authority. --- src/conf/device_conf.h | 5 + src/qemu/qemu_domain_address.c | 367 +++++++++++++++++++++++++++++++++++++++++ 2 files changed, 372 insertions(+) diff --git a/src/conf/device_conf.h b/src/conf/device_conf.h index 8443de6..f435fb5 100644 --- a/src/conf/device_conf.h +++ b/src/conf/device_conf.h @@ -142,6 +142,11 @@ typedef struct _virDomainDeviceInfo { /* bootIndex is only used for disk, network interface, hostdev * and redirdev devices */ unsigned int bootIndex; + + /* pciConnectFlags is only used internally during address + * assignment, never saved and never reported. + */ + int pciConnectFlags; /* enum virDomainPCIConnectFlags */ } virDomainDeviceInfo, *virDomainDeviceInfoPtr; diff --git a/src/qemu/qemu_domain_address.c b/src/qemu/qemu_domain_address.c index b35a95f..22cb402 100644 --- a/src/qemu/qemu_domain_address.c +++ b/src/qemu/qemu_domain_address.c @@ -409,6 +409,373 @@ qemuDomainAssignARMVirtioMMIOAddresses(virDomainDefPtr def, } +/** + * qemuDomainDeviceCalculatePCIConnectFlags: + * + * @dev: The device to be checked + * @pcieFlags: flags to use for a known PCI Express device + * @virtioFlags: flags to use for a virtio device (properly vetted + * for the current qemu binary and arch/machinetype) + * + * Lowest level function to determine PCI connectFlags for a + * device. This function relies on the next higher-level function + * determining the value for pcieFlags and virtioFlags in advance - + * this is to make it more efficient to call multiple times. + * + * Returns appropriate virDomainPCIConnectFlags for this device in + * this domain, or 0 if the device doesn't connect using PCI. There + * is no failure. + */ +static virDomainPCIConnectFlags +qemuDomainDeviceCalculatePCIConnectFlags(virDomainDeviceDefPtr dev, + virDomainPCIConnectFlags pcieFlags + ATTRIBUTE_UNUSED, + virDomainPCIConnectFlags virtioFlags + ATTRIBUTE_UNUSED) +{ + virDomainPCIConnectFlags pciFlags = (VIR_PCI_CONNECT_TYPE_PCI_DEVICE | + VIR_PCI_CONNECT_HOTPLUGGABLE); + + switch ((virDomainDeviceType) dev->type) { + case VIR_DOMAIN_DEVICE_CONTROLLER: { + virDomainControllerDefPtr cont = dev->data.controller; + + switch ((virDomainControllerType) cont->type) { + case VIR_DOMAIN_CONTROLLER_TYPE_PCI: + return virDomainPCIControllerModelToConnectType(cont->model); + + case VIR_DOMAIN_CONTROLLER_TYPE_SATA: + return pciFlags; + + case VIR_DOMAIN_CONTROLLER_TYPE_USB: + switch ((virDomainControllerModelUSB) cont->model) { + case VIR_DOMAIN_CONTROLLER_MODEL_USB_NEC_XHCI: + return pciFlags; + + case VIR_DOMAIN_CONTROLLER_MODEL_USB_EHCI: + case VIR_DOMAIN_CONTROLLER_MODEL_USB_ICH9_EHCI1: + case VIR_DOMAIN_CONTROLLER_MODEL_USB_ICH9_UHCI1: + case VIR_DOMAIN_CONTROLLER_MODEL_USB_ICH9_UHCI2: + case VIR_DOMAIN_CONTROLLER_MODEL_USB_ICH9_UHCI3: + case VIR_DOMAIN_CONTROLLER_MODEL_USB_VT82C686B_UHCI: + case VIR_DOMAIN_CONTROLLER_MODEL_USB_PIIX3_UHCI: + case VIR_DOMAIN_CONTROLLER_MODEL_USB_PIIX4_UHCI: + case VIR_DOMAIN_CONTROLLER_MODEL_USB_PCI_OHCI: + return pciFlags; + + case VIR_DOMAIN_CONTROLLER_MODEL_USB_QUSB1: /* xen only */ + case VIR_DOMAIN_CONTROLLER_MODEL_USB_QUSB2: /* xen only */ + case VIR_DOMAIN_CONTROLLER_MODEL_USB_NONE: + case VIR_DOMAIN_CONTROLLER_MODEL_USB_LAST: + /* should be 0 */ + return pciFlags; + } + + case VIR_DOMAIN_CONTROLLER_TYPE_IDE: + case VIR_DOMAIN_CONTROLLER_TYPE_SCSI: + case VIR_DOMAIN_CONTROLLER_TYPE_VIRTIO_SERIAL: + return pciFlags; + + case VIR_DOMAIN_CONTROLLER_TYPE_FDC: + case VIR_DOMAIN_CONTROLLER_TYPE_CCID: + case VIR_DOMAIN_CONTROLLER_TYPE_LAST: + /* should be 0 */ + return pciFlags; + } + } + + case VIR_DOMAIN_DEVICE_FS: + /* the only type of filesystem so far is virtio-9p-pci */ + return pciFlags; + + case VIR_DOMAIN_DEVICE_NET: { + virDomainNetDefPtr net = dev->data.net; + + /* NB: a type='hostdev' will use PCI, but its + * address is assigned when we're assigning the + * addresses for other hostdev devices. + */ + if (net->type == VIR_DOMAIN_NET_TYPE_HOSTDEV || + STREQ(net->model, "usb-net")) { + /* should be 0 */ + return pciFlags; + } + return pciFlags; + } + + case VIR_DOMAIN_DEVICE_SOUND: + switch ((virDomainSoundModel) dev->data.sound->model) { + case VIR_DOMAIN_SOUND_MODEL_ES1370: + case VIR_DOMAIN_SOUND_MODEL_AC97: + case VIR_DOMAIN_SOUND_MODEL_ICH6: + case VIR_DOMAIN_SOUND_MODEL_ICH9: + return pciFlags; + + case VIR_DOMAIN_SOUND_MODEL_SB16: + case VIR_DOMAIN_SOUND_MODEL_PCSPK: + case VIR_DOMAIN_SOUND_MODEL_USB: + case VIR_DOMAIN_SOUND_MODEL_LAST: + /* should be 0 */ + return pciFlags; + } + + case VIR_DOMAIN_DEVICE_DISK: + switch ((virDomainDiskBus) dev->data.disk->bus) { + case VIR_DOMAIN_DISK_BUS_VIRTIO: + return pciFlags; /* only virtio disks use PCI */ + + case VIR_DOMAIN_DISK_BUS_IDE: + case VIR_DOMAIN_DISK_BUS_FDC: + case VIR_DOMAIN_DISK_BUS_SCSI: + case VIR_DOMAIN_DISK_BUS_XEN: + case VIR_DOMAIN_DISK_BUS_USB: + case VIR_DOMAIN_DISK_BUS_UML: + case VIR_DOMAIN_DISK_BUS_SATA: + case VIR_DOMAIN_DISK_BUS_SD: + case VIR_DOMAIN_DISK_BUS_LAST: + /* should be 0 */ + return pciFlags; + } + + case VIR_DOMAIN_DEVICE_HOSTDEV: + return pciFlags; + + case VIR_DOMAIN_DEVICE_MEMBALLOON: + switch ((virDomainMemballoonModel) dev->data.memballoon->model) { + case VIR_DOMAIN_MEMBALLOON_MODEL_VIRTIO: + return pciFlags; + + case VIR_DOMAIN_MEMBALLOON_MODEL_XEN: + case VIR_DOMAIN_MEMBALLOON_MODEL_NONE: + case VIR_DOMAIN_MEMBALLOON_MODEL_LAST: + /* should be 0 (not PCI) */ + return pciFlags; + } + + case VIR_DOMAIN_DEVICE_RNG: + switch ((virDomainRNGModel) dev->data.rng->model) { + case VIR_DOMAIN_RNG_MODEL_VIRTIO: + return pciFlags; + + case VIR_DOMAIN_RNG_MODEL_LAST: + /* should be 0 */ + return pciFlags; + } + + case VIR_DOMAIN_DEVICE_WATCHDOG: + /* only one model connects using PCI */ + switch ((virDomainWatchdogModel) dev->data.watchdog->model) { + case VIR_DOMAIN_WATCHDOG_MODEL_I6300ESB: + return pciFlags; + + case VIR_DOMAIN_WATCHDOG_MODEL_IB700: + case VIR_DOMAIN_WATCHDOG_MODEL_DIAG288: + case VIR_DOMAIN_WATCHDOG_MODEL_LAST: + /* should be 0 */ + return pciFlags; + } + + case VIR_DOMAIN_DEVICE_VIDEO: + switch ((virDomainVideoType) dev->data.video->type) { + case VIR_DOMAIN_VIDEO_TYPE_VIRTIO: + case VIR_DOMAIN_VIDEO_TYPE_VGA: + case VIR_DOMAIN_VIDEO_TYPE_CIRRUS: + case VIR_DOMAIN_VIDEO_TYPE_VMVGA: + case VIR_DOMAIN_VIDEO_TYPE_XEN: + case VIR_DOMAIN_VIDEO_TYPE_VBOX: + case VIR_DOMAIN_VIDEO_TYPE_QXL: + case VIR_DOMAIN_VIDEO_TYPE_PARALLELS: + return pciFlags; + + case VIR_DOMAIN_VIDEO_TYPE_LAST: + /* should be 0 */ + return pciFlags; + } + + + case VIR_DOMAIN_DEVICE_SHMEM: + return pciFlags; + + case VIR_DOMAIN_DEVICE_INPUT: + switch ((virDomainInputBus) dev->data.input->bus) { + case VIR_DOMAIN_INPUT_BUS_VIRTIO: + return pciFlags; + + case VIR_DOMAIN_INPUT_BUS_PS2: + case VIR_DOMAIN_INPUT_BUS_USB: + case VIR_DOMAIN_INPUT_BUS_XEN: + case VIR_DOMAIN_INPUT_BUS_PARALLELS: + case VIR_DOMAIN_INPUT_BUS_LAST: + /* should be 0 */ + return pciFlags; + } + + case VIR_DOMAIN_DEVICE_CHR: + switch ((virDomainChrSerialTargetType) dev->data.chr->targetType) { + case VIR_DOMAIN_CHR_SERIAL_TARGET_TYPE_PCI: + return pciFlags; + + case VIR_DOMAIN_CHR_SERIAL_TARGET_TYPE_ISA: + case VIR_DOMAIN_CHR_SERIAL_TARGET_TYPE_USB: + case VIR_DOMAIN_CHR_SERIAL_TARGET_TYPE_LAST: + /* should be 0 */ + return pciFlags; + } + + /* These devices don't ever connect with PCI */ + case VIR_DOMAIN_DEVICE_NVRAM: + case VIR_DOMAIN_DEVICE_TPM: + case VIR_DOMAIN_DEVICE_PANIC: + case VIR_DOMAIN_DEVICE_MEMORY: + case VIR_DOMAIN_DEVICE_HUB: + case VIR_DOMAIN_DEVICE_REDIRDEV: + case VIR_DOMAIN_DEVICE_SMARTCARD: + /* These devices don't even have a DeviceInfo */ + case VIR_DOMAIN_DEVICE_LEASE: + case VIR_DOMAIN_DEVICE_GRAPHICS: + case VIR_DOMAIN_DEVICE_IOMMU: + case VIR_DOMAIN_DEVICE_LAST: + case VIR_DOMAIN_DEVICE_NONE: + /* should be 0 */ + return pciFlags; + } + + /* We can never get here, because all cases are covered in the + * switch, and they all return, but the compiler will still + * complain "control reaches end of non-void function" unless + * we add the following return. + */ + return 0; +} + + +typedef struct { + virDomainPCIConnectFlags virtioFlags; + virDomainPCIConnectFlags pcieFlags; +} qemuDomainFillDevicePCIConnectFlagsIterData; + + +/** + * qemuDomainFillDevicePCIConnectFlagsIterInit: + * + * Initialize the iterator data that is used when calling + * qemuDomainCalculateDevicePCIConnectFlags(). + */ +static void +qemuDomainFillDevicePCIConnectFlagsIterInit(virDomainDefPtr def, + virQEMUCapsPtr qemuCaps, + qemuDomainFillDevicePCIConnectFlagsIterData *data) +{ + if (qemuDomainMachineHasPCIeRoot(def)) { + data->pcieFlags = (VIR_PCI_CONNECT_TYPE_PCIE_DEVICE | + VIR_PCI_CONNECT_HOTPLUGGABLE); + } else { + data->pcieFlags = (VIR_PCI_CONNECT_TYPE_PCI_DEVICE | + VIR_PCI_CONNECT_HOTPLUGGABLE); + } + + if (virQEMUCapsGet(qemuCaps, QEMU_CAPS_VIRTIO_PCI_DISABLE_LEGACY)) { + data->virtioFlags = data->pcieFlags; + } else { + data->virtioFlags = (VIR_PCI_CONNECT_TYPE_PCI_DEVICE | + VIR_PCI_CONNECT_HOTPLUGGABLE); + } +} + + +/** + * qemuDomainFillDevicePCIConnectFlagsIter: + * + * @def: the entire DomainDef + * @dev: The device to be checked + * @info: virDomainDeviceInfo within the device + * @opaque: points to iterator data setup beforehand. + * + * Sets the pciConnectFlags for a single device's info. Has properly + * formatted arguments to be called by virDomainDeviceInfoIterate(). + * + * Always returns 0 - there is no failure. + */ +static int +qemuDomainFillDevicePCIConnectFlagsIter(virDomainDefPtr def ATTRIBUTE_UNUSED, + virDomainDeviceDefPtr dev, + virDomainDeviceInfoPtr info, + void *opaque) +{ + qemuDomainFillDevicePCIConnectFlagsIterData *data = opaque; + + info->pciConnectFlags + = qemuDomainDeviceCalculatePCIConnectFlags(dev, data->pcieFlags, + data->virtioFlags); + return 0; +} + + +/** + * qemuDomainFillAllPCIConnectFlags: + * + * @def: the entire DomainDef + * @qemuCaps: as you'd expect + * + * Set the info->pciConnectFlags for all devices in the domain. + * + * Returns 0 on success or -1 on failure (the only possibility of + * failure would be some internal problem with + * virDomainDeviceInfoIterate()) + */ +static int ATTRIBUTE_UNUSED +qemuDomainFillAllPCIConnectFlags(virDomainDefPtr def, + virQEMUCapsPtr qemuCaps) +{ + qemuDomainFillDevicePCIConnectFlagsIterData data; + + qemuDomainFillDevicePCIConnectFlagsIterInit(def, qemuCaps, &data); + + return virDomainDeviceInfoIterate(def, + qemuDomainFillDevicePCIConnectFlagsIter, + &data); +} + + +/** + * qemuDomainFillDevicePCIConnectFlags: + * + * @def: the entire DomainDef + * @dev: The device to be checked + * @qemuCaps: as you'd expect + * + * Set the info->pciConnectFlags for a single device. + * + * No return value. + */ +static void ATTRIBUTE_UNUSED +qemuDomainFillDevicePCIConnectFlags(virDomainDefPtr def, + virDomainDeviceDefPtr dev, + virQEMUCapsPtr qemuCaps) +{ + virDomainDeviceInfoPtr info = virDomainDeviceGetInfo(dev); + + if (info) { + /* qemuDomainDeviceCalculatePCIConnectFlags() is called with + * the data setup in the ...IterData by ...IterInit() rather + * than setting the values directly here. It may seem like + * pointless posturing, but it's done this way to eliminate + * duplicated setup code while allowing more efficient + * operation when it's being done repeatedly with the device + * iterator (since qemuDomainFillAllPCIConnectFlags() only + * calls ...IterInit() once for all devices). + */ + qemuDomainFillDevicePCIConnectFlagsIterData data; + + qemuDomainFillDevicePCIConnectFlagsIterInit(def, qemuCaps, &data); + + info->pciConnectFlags + = qemuDomainDeviceCalculatePCIConnectFlags(dev, data.pcieFlags, + data.virtioFlags); + } +} + + static int qemuDomainPCIAddressReserveNextAddr(virDomainPCIAddressSetPtr addrs, virDomainDeviceInfoPtr dev, -- 2.7.4