[PATCH v5 24/30] network: add an nftables backend for network driver's firewall construction

Support using nftables to setup the firewall for each virtual network, rather than iptables. The initial implementation of the nftables backend creates (almost) exactly the same ruleset as the iptables backend, determined by running the following commands on a host that has an active virtual network: iptables-save >iptables.txt iptables-restore-translate -f iptables.txt (and the similar ip6tables-save/ip6tables-restore-translate for an IPv6 network). Correctness of the new backend was checked by comparing the output of: nft list ruleset when the backend is set to iptables and when it is set to nftables. This page was used as a guide: https://wiki.nftables.org/wiki-nftables/index.php/Moving_from_iptables_to... The only differences between the rules created by the nftables backed vs. the iptables backend (aside from a few inconsequential changes in display order of some chains/options) are: 1) When we add nftables rules, rather than adding them in the system-created "filter" and "nat" tables, we add them in a private table (ie only we should be using it) created by us called "libvirt" (the system-created "filter" and "nat" tables can't be used because adding any rules to those tables directly with nft will cause failure of any legacy application attempting to use iptables when it tries to list the iptables rules (e.g. "iptables -S"). (NB: in nftables only a single table is required for both nat and filter rules - the chains for each are differentiated by specifying different "hook" locations for the toplevel chain of each) 2) Since the rules that were added to allow tftp/dns/dhcp traffic from the guests to the host are unnecessary in the context of nftables, those rules aren't added. (Longer explanation: In the case of iptables, all rules were in a single table, and it was always assumed that there would be some "catch-all" REJECT rule added by "someone else" in the case that a packet didn't match any specific rules, so libvirt added these specific rules to ensure that, no matter what other rules were added by any other subsystem, the guests would still have functional tftp/dns/dhcp. For nftables though, the rules added by each subsystem are in a separate table, and in order for traffic to be accepted, it must be accepted by *all* tables, so just adding the specific rules to libvirt's table doesn't help anything (as the default for the libvirt table is ACCEPT anyway) and it just isn't practical/possible for libvirt to find *all* other tables and add rules in all of them to make sure the traffic is accepted. libvirt does this for firewalld (it creates a "libvirt" zone that allows tftp/dns/dhcp, and adds all virtual network bridges to that zone), however, so in that case no extra work is required of the sysadmin.) 3) nftables doesn't support the "checksum mangle" rule (or any equivalent functionality) that we have historically added to our iptables rules, so the nftables rules we add have nothing related to checksum mangling. (NB: The result of (3) is that if you a) have a very old guest (RHEL5 era or earlier) and b) that guest is using a virtio-net network device, and c) the virtio-net device is using vhost packet processing (the default) then DHCP on the guest will fail. You can work around this by adding <driver name='qemu'/> to the <interface> XML for the guest). There are certainly much better nftables rulesets that could be used instead of those implemented here, and everything is in place to make future changes to the rules that are used simple and free of surprises (e.g. the rules that are added have coresponding "removal" commands added to the network status so that we will always remove exactly the rules that were previously added rather than trying to remove the rules that "the current build of libvirt would have added" (which will be incorrect the first time we run a libvirt with a newly modified ruleset). For this initial implementation though, I wanted the nftables rules to be as identical to the iptables rules as possible, just to make it easier to verify that everything is working. The backend can be manually chosen using the firewall_backend setting in /etc/libvirt/network.conf. libvirtd/virtnetworkd will read this setting when it starts; if there is no explicit setting, it will check for availability of FIREWALL_BACKEND_DEFAULT_1 and then FIREWALL_BACKEND_DEFAULT_2 (which are set at build time in meson_options.txt or by adding -Dfirewall_backend_default_n=blah to the meson commandline), and use the first backend that is available (ie, that has the necessary programs installed). The standard meson_options.txt is set to check for nftables first, and then iptables. Although it should be very safe to change the default backend from iptables to nftables, that change is left for a later patch, to show how the change in default can be undone if someone really needs to do that. Signed-off-by: Laine Stump <laine(a)redhat.com&gt; --- meson.build | 5 + meson_options.txt | 1 + po/POTFILES | 1 + src/network/bridge_driver_conf.c | 11 +- src/network/bridge_driver_linux.c | 17 +- src/network/meson.build | 1 + src/network/network.conf.in | 21 +- src/network/network_nftables.c | 940 ++++++++++++++++++++++++++++++ src/network/network_nftables.h | 28 + src/util/virfirewall.c | 167 +++++- src/util/virfirewall.h | 2 + 11 files changed, 1188 insertions(+), 6 deletions(-) create mode 100644 src/network/network_nftables.c create mode 100644 src/network/network_nftables.h diff --git a/meson.build b/meson.build index 91211d7964..f67c3d2724 100644 --- a/meson.build +++ b/meson.build @@ -1639,6 +1639,11 @@ if not get_option('driver_network').disabled() and conf.has('WITH_LIBVIRTD') firewall_backend_default_conf = firewall_backend_default_1 firewall_backend_default_1 = 'VIR_FIREWALL_BACKEND_' + firewall_backend_default_1.to_upper() conf.set('FIREWALL_BACKEND_DEFAULT_1', firewall_backend_default_1) + + firewall_backend_default_2 = get_option('firewall_backend_default_2') + firewall_backend_default_2 = 'VIR_FIREWALL_BACKEND_' + firewall_backend_default_2.to_upper() + conf.set('FIREWALL_BACKEND_DEFAULT_2', firewall_backend_default_2) + elif get_option('driver_network').enabled() error('libvirtd must be enabled to build the network driver') endif diff --git a/meson_options.txt b/meson_options.txt index 41342793bc..cd2b9acc79 100644 --- a/meson_options.txt +++ b/meson_options.txt @@ -116,6 +116,7 @@ option('firewalld', type: 'feature', value: 'auto', description: 'firewalld supp # dep:firewalld option('firewalld_zone', type: 'feature', value: 'auto', description: 'whether to install firewalld libvirt zone') option('firewall_backend_default_1', type: 'string', value: 'iptables', description: 'first firewall backend to try when none is specified') +option('firewall_backend_default_2', type: 'string', value: 'nftables', description: 'second firewall backend to try when none is specified (and first is unavailable)') option('host_validate', type: 'feature', value: 'auto', description: 'build virt-host-validate') option('init_script', type: 'combo', choices: ['systemd', 'openrc', 'check', 'none'], value: 'check', description: 'Style of init script to install') option('loader_nvram', type: 'string', value: '', description: 'Pass list of pairs of <loader>:<nvram> paths. Both pairs and list items are separated by a colon.') diff --git a/po/POTFILES b/po/POTFILES index 0542d342d6..4ad7e19e08 100644 --- a/po/POTFILES +++ b/po/POTFILES @@ -145,6 +145,7 @@ src/network/bridge_driver_conf.c src/network/bridge_driver_linux.c src/network/leaseshelper.c src/network/network_iptables.c +src/network/network_nftables.c src/node_device/node_device_driver.c src/node_device/node_device_udev.c src/nwfilter/nwfilter_dhcpsnoop.c diff --git a/src/network/bridge_driver_conf.c b/src/network/bridge_driver_conf.c index d0135fb12a..a083fa68e6 100644 --- a/src/network/bridge_driver_conf.c +++ b/src/network/bridge_driver_conf.c @@ -67,7 +67,7 @@ virNetworkLoadDriverConfig(virNetworkDriverConfig *cfg G_GNUC_UNUSED, g_autofree char *fwBackendStr = NULL; bool fwBackendSelected = false; size_t i; - int fwBackends[] = { FIREWALL_BACKEND_DEFAULT_1 }; + int fwBackends[] = { FIREWALL_BACKEND_DEFAULT_1, FIREWALL_BACKEND_DEFAULT_2 }; G_STATIC_ASSERT(G_N_ELEMENTS(fwBackends) == VIR_FIREWALL_BACKEND_LAST); if (access(filename, R_OK) == 0) { @@ -105,6 +105,15 @@ virNetworkLoadDriverConfig(virNetworkDriverConfig *cfg G_GNUC_UNUSED, fwBackendSelected = true; break; } + + case VIR_FIREWALL_BACKEND_NFTABLES: { + g_autofree char *nftablesInPath = virFindFileInPath(NFT); + + if (nftablesInPath) + fwBackendSelected = true; + break; + } + case VIR_FIREWALL_BACKEND_LAST: virReportEnumRangeError(virFirewallBackend, fwBackends[i]); return -1; diff --git a/src/network/bridge_driver_linux.c b/src/network/bridge_driver_linux.c index b488600989..35e6bd1154 100644 --- a/src/network/bridge_driver_linux.c +++ b/src/network/bridge_driver_linux.c @@ -27,6 +27,7 @@ #include "virfirewall.h" #include "virfirewalld.h" #include "network_iptables.h" +#include "network_nftables.h" #define VIR_FROM_THIS VIR_FROM_NONE @@ -49,6 +50,9 @@ networkFirewallSetupPrivateChains(virFirewallBackend backend, case VIR_FIREWALL_BACKEND_IPTABLES: return iptablesSetupPrivateChains(layer); + case VIR_FIREWALL_BACKEND_NFTABLES: + return nftablesSetupPrivateChains(layer); + case VIR_FIREWALL_BACKEND_LAST: virReportEnumRangeError(virFirewallBackend, backend); return -1; @@ -412,7 +416,18 @@ networkAddFirewallRules(virNetworkDef *def, } } - return iptablesAddFirewallRules(def, fwRemoval); + switch (firewallBackend) { + case VIR_FIREWALL_BACKEND_IPTABLES: + return iptablesAddFirewallRules(def, fwRemoval); + + case VIR_FIREWALL_BACKEND_NFTABLES: + return nftablesAddFirewallRules(def, fwRemoval); + + case VIR_FIREWALL_BACKEND_LAST: + virReportEnumRangeError(virFirewallBackend, firewallBackend); + return -1; + } + return 0; } diff --git a/src/network/meson.build b/src/network/meson.build index c1934d2e68..bf2893accc 100644 --- a/src/network/meson.build +++ b/src/network/meson.build @@ -3,6 +3,7 @@ network_driver_sources = [ 'bridge_driver_conf.c', 'bridge_driver_platform.c', 'network_iptables.c', + 'network_nftables.c', ] driver_source_files += files(network_driver_sources) diff --git a/src/network/network.conf.in b/src/network/network.conf.in index ec75e125d8..f579f39fcd 100644 --- a/src/network/network.conf.in +++ b/src/network/network.conf.in @@ -5,7 +5,24 @@ # firewall_backend: # # determines which subsystem to use to setup firewall packet -# filtering rules for virtual networks. Currently the only supported -# selection is "iptables". +# filtering rules for virtual networks. +# +# Supported settings: +# +# iptables - use iptables commands to construct the firewall +# nftables - use nft commands to construct the firewall +# +# If firewall_backend isn't set in this file, libvirt will +# prefer the @FIREWALL_BACKEND@ backend *if the necessary package. +# binary is installed*, otherwise it will look for the package/binary +# needed for the other backend and use that if available. If neither +# is available on the host, then the network driver will fail to +# start, and an error will be logged. +# +# (NB: switching from one backend to another while there are active +# virtual networks *is* supported. The change will take place the +# next time that libvirtd/virtnetworkd is restarted - all existing +# virtual networks will have their old firewalls removed, and then +# reloaded using the new backend.) # #firewall_backend = "@FIREWALL_BACKEND@" diff --git a/src/network/network_nftables.c b/src/network/network_nftables.c new file mode 100644 index 0000000000..c8cee98df5 --- /dev/null +++ b/src/network/network_nftables.c @@ -0,0 +1,940 @@ +/* + * network_nftables.c: nftables-based firewall implementation for + * virtual networks. + * + * Copyright (C) 2007-2014 Red Hat, Inc. + * + * This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public + * License as published by the Free Software Foundation; either + * version 2.1 of the License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this library. If not, see + * <http://www.gnu.org/licenses/>;. + */ + +#include <config.h> + +#include <stdarg.h> +#include <unistd.h> +#include <fcntl.h> +#include <sys/types.h> +#include <sys/stat.h> + +#include "internal.h" +#include "virfirewalld.h" +#include "virerror.h" +#include "virlog.h" +#include "virhash.h" +#include "virenum.h" +#include "virstring.h" +#include "network_nftables.h" + +VIR_LOG_INIT("network.nftables"); + +#define VIR_FROM_THIS VIR_FROM_NONE + +#define VIR_NFTABLES_INPUT_CHAIN "LIBVIRT_INP" +#define VIR_NFTABLES_OUTPUT_CHAIN "LIBVIRT_OUT" +#define VIR_NFTABLES_FWD_IN_CHAIN "LIBVIRT_FWI" +#define VIR_NFTABLES_FWD_OUT_CHAIN "LIBVIRT_FWO" +#define VIR_NFTABLES_FWD_X_CHAIN "LIBVIRT_FWX" +#define VIR_NFTABLES_NAT_POSTROUTE_CHAIN "LIBVIRT_PRT" + +/* we must avoid using the standard "filter" table as used by + * iptables, as any subsequent attempts to use iptables commands will + * fail (due to the "filter" table having rules that are unexpected by + * the iptables-compat + */ + +#define VIR_NFTABLES_PRIVATE_TABLE "libvirt" + +/* nftables backend uses the same binary (nft) for all layers, but + * IPv4 and IPv6 have their rules in separate classes of tables, + * either "ip" or "ip6". (there is also an "inet" class of tables that + * would examined for both IPv4 and IPv6 traffic, but since we want + * different rules for each family, we only use the family-specific + * table classes). + */ +VIR_ENUM_DECL(nftablesLayer); +VIR_ENUM_IMPL(nftablesLayer, + VIR_FIREWALL_LAYER_LAST, + "", + "ip", + "ip6", +); + + +typedef struct { + const char *parent; + const char *child; + const char *extraArgs; +} nftablesGlobalChain; + +typedef struct { + virFirewallLayer layer; + nftablesGlobalChain *chains; + size_t nchains; + bool *changed; +} nftablesGlobalChainData; + + +nftablesGlobalChain nftablesChains[] = { + /* chains for filter rules */ + {NULL, "INPUT", "{ type filter hook input priority 0; policy accept; }"}, + {NULL, "FORWARD", "{ type filter hook forward priority 0; policy accept; }"}, + {NULL, "OUTPUT", "{ type filter hook output priority 0; policy accept; }"}, + {"INPUT", VIR_NFTABLES_INPUT_CHAIN, NULL}, + {"OUTPUT", VIR_NFTABLES_OUTPUT_CHAIN, NULL}, + {"FORWARD", VIR_NFTABLES_FWD_OUT_CHAIN, NULL}, + {"FORWARD", VIR_NFTABLES_FWD_IN_CHAIN, NULL}, + {"FORWARD", VIR_NFTABLES_FWD_X_CHAIN, NULL}, + + /* chains for NAT rules */ + {NULL, "POSTROUTING", "{ type nat hook postrouting priority 100; policy accept; }"}, + {"POSTROUTING", VIR_NFTABLES_NAT_POSTROUTE_CHAIN, NULL}, +}; + + +static int +nftablesPrivateChainCreate(virFirewall *fw, + virFirewallLayer layer, + const char *const *lines, + void *opaque) +{ + nftablesGlobalChainData *data = opaque; + g_autoptr(GHashTable) chains = virHashNew(NULL); + g_autoptr(GHashTable) links = virHashNew(NULL); + const char *const *line; + const char *chain = NULL; + size_t i; + bool tableMatch = false; + const char *layerStr = nftablesLayerTypeToString(layer); + g_autofree char *tableStr = g_strdup_printf("table %s %s {", + layerStr, + VIR_NFTABLES_PRIVATE_TABLE); + + line = lines; + while (line && *line) { + const char *pos = *line; + + virSkipSpaces(&pos); + if (STREQ(pos, tableStr)) { + /* "table ip libvirt {" */ + + tableMatch = true; + + } else if (STRPREFIX(pos, "chain ")) { + /* "chain LIBVIRT_OUT {" */ + + chain = pos + 6; + pos = strchr(chain, ' '); + if (pos) { + *(char *)pos = '\0'; + if (virHashUpdateEntry(chains, chain, (void *)0x1) < 0) + return -1; + } + + } else if ((pos = strstr(pos, "jump "))) { + /* "counter packets 20189046 bytes 3473108889 jump LIBVIRT_OUT" */ + + pos += 5; + if (chain) { + if (virHashUpdateEntry(links, pos, (char *)chain) < 0) + return -1; + } + + } + line++; + } + + if (!tableMatch) { + virFirewallAddCmd(fw, layer, "add", "table", + layerStr, VIR_NFTABLES_PRIVATE_TABLE, NULL); + } + + for (i = 0; i < data->nchains; i++) { + if (!(tableMatch && virHashLookup(chains, data->chains[i].child))) { + virFirewallAddCmd(fw, layer, "add", "chain", + layerStr, VIR_NFTABLES_PRIVATE_TABLE, + data->chains[i].child, + data->chains[i].extraArgs, NULL); + *data->changed = true; + } + + if (data->chains[i].parent) { + const char *from = virHashLookup(links, data->chains[i].child); + + if (!from || STRNEQ(from, data->chains[i].parent)) { + virFirewallAddCmd(fw, layer, "insert", "rule", + layerStr, VIR_NFTABLES_PRIVATE_TABLE, + data->chains[i].parent, "counter", + "jump", data->chains[i].child, NULL); + } + } + } + + return 0; +} + + +int +nftablesSetupPrivateChains(virFirewallLayer layer) +{ + bool changed = false; + g_autoptr(virFirewall) fw = virFirewallNew(VIR_FIREWALL_BACKEND_NFTABLES); + const char *layerStr = nftablesLayerTypeToString(layer); + nftablesGlobalChainData data = { layer, nftablesChains, G_N_ELEMENTS(nftablesChains), &changed }; + + virFirewallStartTransaction(fw, 0); + + /* the output of "nft list table ip[6] libvirt" will be parsed by + * the callback nftablesPrivateChainCreate which will add any + * needed commands to add missing chains (or possibly even add the + * "ip[6] libvirt" table itself + */ + virFirewallAddCmdFull(fw, layer, false, + nftablesPrivateChainCreate, &data, + "list", "table", + layerStr, VIR_NFTABLES_PRIVATE_TABLE, NULL); + + if (virFirewallApply(fw) < 0) + return -1; + + return changed ? 1 : 0; +} + + +static void +nftablesAddInput(virFirewall *fw, + virFirewallLayer layer, + const char *iface, + int port, + int tcp) +{ + g_autofree char *portstr = g_strdup_printf("%d", port); + const char *layerStr = nftablesLayerTypeToString(layer); + + virFirewallAddCmd(fw, layer, "insert", "rule", + layerStr, VIR_NFTABLES_PRIVATE_TABLE, + VIR_NFTABLES_INPUT_CHAIN, + "iifname", iface, + tcp ? "tcp" : "udp", + "dport", portstr, + "counter", "accept", + NULL); +} + + +static void +nftablesAddOutput(virFirewall *fw, + virFirewallLayer layer, + const char *iface, + int port, + int tcp) +{ + g_autofree char *portstr = g_strdup_printf("%d", port); + const char *layerStr = nftablesLayerTypeToString(layer); + + virFirewallAddCmd(fw, layer, "insert", "rule", + layerStr, VIR_NFTABLES_PRIVATE_TABLE, + VIR_NFTABLES_OUTPUT_CHAIN, + "oifname", iface, + tcp ? "tcp" : "udp", + "dport", portstr, + "counter", "accept", + NULL); +} + + +/** + * nftablesAddTcpInput: + * + * Add a rule to @fw that will allow incoming TCP sessions to port + * @port on @iface with protocol @layer. + */ +static void +nftablesAddTcpInput(virFirewall *fw, + virFirewallLayer layer, + const char *iface, + int port) +{ + nftablesAddInput(fw, layer, iface, port, 1); +} + + +/** + * nftablesAddUdpInput: + * + * Add a rule to @fw that will allow incoming UDP sessions to port + * @port on @iface with protocol @layer. + */ +static void +nftablesAddUdpInput(virFirewall *fw, + virFirewallLayer layer, + const char *iface, + int port) +{ + nftablesAddInput(fw, layer, iface, port, 0); +} + + +/** + * nftablesAddTcpOutput: + * + * Add a rule to @fw that will allow outbound TCP sessions to port + * @port on @iface with protocol @layer. + */ +static void +nftablesAddTcpOutput(virFirewall *fw, + virFirewallLayer layer, + const char *iface, + int port) +{ + nftablesAddOutput(fw, layer, iface, port, 1); +} + + +/** + * nftablesAddUdpOutput: + * + * Add a rule to @fw that will allow outbound UDP sessions to port + * @port on @iface with protocol @layer. + */ +static void +nftablesAddUdpOutput(virFirewall *fw, + virFirewallLayer layer, + const char *iface, + int port) +{ + nftablesAddOutput(fw, layer, iface, port, 0); +} + + +/** + * nftablesAddForwardAllowOut: + * + * Add a rule to @fw that allows all outbound traffic coming from + * @iface (the virtual network's bridge) to be forwarded out @physdev, + * as long as its source address is in @netaddr/@prefix. + */ +static int +nftablesAddForwardAllowOut(virFirewall *fw, + virSocketAddr *netaddr, + unsigned int prefix, + const char *iface, + const char *physdev) +{ + g_autofree char *networkstr = NULL; + virFirewallLayer layer = VIR_SOCKET_ADDR_FAMILY(netaddr) == AF_INET ? + VIR_FIREWALL_LAYER_IPV4 : VIR_FIREWALL_LAYER_IPV6; + const char *layerStr = nftablesLayerTypeToString(layer); + virFirewallCmd *fwCmd; + + if (!(networkstr = virSocketAddrFormatWithPrefix(netaddr, prefix, true))) + return -1; + + fwCmd = virFirewallAddCmd(fw, layer, "insert", "rule", + layerStr, VIR_NFTABLES_PRIVATE_TABLE, + VIR_NFTABLES_FWD_OUT_CHAIN, + layerStr, "saddr", networkstr, + "iifname", iface, NULL); + + if (physdev && physdev[0]) + virFirewallCmdAddArgList(fw, fwCmd, "oifname", physdev, NULL); + + virFirewallCmdAddArgList(fw, fwCmd, "counter", "accept", NULL); + + return 0; +} + +/** + * nftablesAddForwardAllowRelatedIn: + * + * Add a rule to @fw that allows all traffic coming in from @physdev + * and destined to @iface (the virtual network's bridge) that has a + * destination within @netaddr/@prefix and is associated with an + * existing connection. + */ +static int +nftablesAddForwardAllowRelatedIn(virFirewall *fw, + virSocketAddr *netaddr, + unsigned int prefix, + const char *iface, + const char *physdev) +{ + virFirewallLayer layer = VIR_SOCKET_ADDR_FAMILY(netaddr) == AF_INET ? + VIR_FIREWALL_LAYER_IPV4 : VIR_FIREWALL_LAYER_IPV6; + const char *layerStr = nftablesLayerTypeToString(layer); + g_autofree char *networkstr = NULL; + virFirewallCmd *fwCmd; + + if (!(networkstr = virSocketAddrFormatWithPrefix(netaddr, prefix, true))) + return -1; + + fwCmd = virFirewallAddCmd(fw, layer, "insert", "rule", + layerStr, VIR_NFTABLES_PRIVATE_TABLE, + VIR_NFTABLES_FWD_IN_CHAIN, NULL); + + if (physdev && physdev[0]) + virFirewallCmdAddArgList(fw, fwCmd, "iifname", physdev, NULL); + + virFirewallCmdAddArgList(fw, fwCmd, "oifname", iface, + layerStr, "daddr", networkstr, + "ct", "state", "related,established", + "counter", "accept", NULL); + return 0; +} + + +/** + * nftablesAddForwardAllowIn: + * + * Add a rule to @fw that allows all traffic coming in from @physdev + * and destined to @iface (the virtual network's bridge) that has a + * destination within @netaddr/@prefix. + */ +static int +nftablesAddForwardAllowIn(virFirewall *fw, + virSocketAddr *netaddr, + unsigned int prefix, + const char *iface, + const char *physdev) +{ + virFirewallLayer layer = VIR_SOCKET_ADDR_FAMILY(netaddr) == AF_INET ? + VIR_FIREWALL_LAYER_IPV4 : VIR_FIREWALL_LAYER_IPV6; + const char *layerStr = nftablesLayerTypeToString(layer); + g_autofree char *networkstr = NULL; + virFirewallCmd *fwCmd; + + if (!(networkstr = virSocketAddrFormatWithPrefix(netaddr, prefix, true))) + return -1; + + fwCmd = virFirewallAddCmd(fw, layer, "insert", "rule", + layerStr, VIR_NFTABLES_PRIVATE_TABLE, + VIR_NFTABLES_FWD_IN_CHAIN, + layerStr, "daddr", networkstr, NULL); + + if (physdev && physdev[0]) + virFirewallCmdAddArgList(fw, fwCmd, "iifname", physdev, NULL); + + virFirewallCmdAddArgList(fw, fwCmd, "oifname", iface, + "counter", "accept", NULL); + return 0; +} + + +/** + * nftablesAddForwardAllowCross: + * + * Add a rule to @fw to allow traffic to go across @iface (the virtual + * network's bridge) from one port to another. This allows all traffic + * between guests on the same virtual network. + */ +static void +nftablesAddForwardAllowCross(virFirewall *fw, + virFirewallLayer layer, + const char *iface) +{ + virFirewallAddCmd(fw, layer, "insert", "rule", + nftablesLayerTypeToString(layer), + VIR_NFTABLES_PRIVATE_TABLE, + VIR_NFTABLES_FWD_X_CHAIN, + "iifname", iface, + "oifname", iface, + "counter", "accept", + NULL); +} + + +/** + * nftablesAddForwardRejectOut: + * + * Add a rule to @fw to forbid all outbound traffic through @iface + * (the virtual network's bridge). This is used as a catchall rule to + * reject traffic that hasn't already been explicitly allowed by + * another rule. + */ +static void +nftablesAddForwardRejectOut(virFirewall *fw, + virFirewallLayer layer, + const char *iface) +{ + virFirewallAddCmd(fw, layer, "insert", "rule", + nftablesLayerTypeToString(layer), + VIR_NFTABLES_PRIVATE_TABLE, + VIR_NFTABLES_FWD_OUT_CHAIN, + "iifname", iface, + "counter", "reject", + NULL); +} + + +/** + * nftablesAddForwardRejectIn: + * + * Add a rule to @fw to forbid all inbound traffic through @iface (the + * virtual network's bridge). This is used as a catchall rule to + * reject traffic that hasn't already been explicitly allowed by + * another rule. + */ +static void +nftablesAddForwardRejectIn(virFirewall *fw, + virFirewallLayer layer, + const char *iface) +{ + virFirewallAddCmd(fw, layer, "insert", "rule", + nftablesLayerTypeToString(layer), + VIR_NFTABLES_PRIVATE_TABLE, + VIR_NFTABLES_FWD_IN_CHAIN, + "oifname", iface, + "counter", "reject", + NULL); +} + + +/** + * nftablesAddForwardMasquerade: + * + * Add a rule to @fw that will masquerade outbound traffic from + * @netaddr/@prefix @iface to have the source IP/port from one of the + * range of @addr:@port (or something appropriate for the interface + * used for egress, if no address/port range is given) + */ +static int +nftablesAddForwardMasquerade(virFirewall *fw, + virSocketAddr *netaddr, + unsigned int prefix, + const char *physdev, + virSocketAddrRange *addr, + virPortRange *port, + const char *protocol) +{ + g_autofree char *networkstr = NULL; + g_autofree char *addrStartStr = NULL; + g_autofree char *addrEndStr = NULL; + g_autofree char *portRangeStr = NULL; + g_autofree char *natRangeStr = NULL; + virFirewallCmd *fwCmd; + int af = VIR_SOCKET_ADDR_FAMILY(netaddr); + virFirewallLayer layer = af == AF_INET ? + VIR_FIREWALL_LAYER_IPV4 : VIR_FIREWALL_LAYER_IPV6; + const char *layerStr = nftablesLayerTypeToString(layer); + + if (!(networkstr = virSocketAddrFormatWithPrefix(netaddr, prefix, true))) + return -1; + + if (VIR_SOCKET_ADDR_IS_FAMILY(&addr->start, af)) { + if (!(addrStartStr = virSocketAddrFormat(&addr->start))) + return -1; + if (VIR_SOCKET_ADDR_IS_FAMILY(&addr->end, af)) { + if (!(addrEndStr = virSocketAddrFormat(&addr->end))) + return -1; + } + } + + fwCmd = virFirewallAddCmd(fw, layer, "insert", "rule", + layerStr, VIR_NFTABLES_PRIVATE_TABLE, + VIR_NFTABLES_NAT_POSTROUTE_CHAIN, NULL); + + if (protocol && protocol[0]) + virFirewallCmdAddArgList(fw, fwCmd, "meta", "l4proto", protocol, NULL); + + virFirewallCmdAddArgList(fw, fwCmd, + layerStr, "saddr", networkstr, + layerStr, "daddr", "!=", networkstr, NULL); + + if (physdev && physdev[0]) + virFirewallCmdAddArgList(fw, fwCmd, "oifname", physdev, NULL); + + if (protocol && protocol[0]) { + if (port->start == 0 && port->end == 0) { + port->start = 1024; + port->end = 65535; + } + + if (port->start < port->end && port->end < 65536) { + portRangeStr = g_strdup_printf(":%u-%u", port->start, port->end); + } else { + virReportError(VIR_ERR_INTERNAL_ERROR, + _("Invalid port range '%1$u-%2$u'."), + port->start, port->end); + return -1; + } + } + + /* Use snat if public address is specified */ + if (addrStartStr && addrStartStr[0]) { + if (addrEndStr && addrEndStr[0]) { + natRangeStr = g_strdup_printf("%s-%s%s", addrStartStr, addrEndStr, + portRangeStr ? portRangeStr : ""); + } else { + natRangeStr = g_strdup_printf("%s%s", addrStartStr, + portRangeStr ? portRangeStr : ""); + } + + virFirewallCmdAddArgList(fw, fwCmd, "counter", "snat", "to", natRangeStr, NULL); + } else { + virFirewallCmdAddArgList(fw, fwCmd, "counter", "masquerade", NULL); + + if (portRangeStr && portRangeStr[0]) + virFirewallCmdAddArgList(fw, fwCmd, "to", portRangeStr, NULL); + } + + return 0; +} + + +/** + * nftablesAddDontMasquerade: + * + * Add a rule to @fw that prevents masquerading traffic coming from + * the network associated with the bridge if said traffic targets + * @destaddr. + */ +static int +nftablesAddDontMasquerade(virFirewall *fw, + virSocketAddr *netaddr, + unsigned int prefix, + const char *physdev, + const char *destaddr) +{ + g_autofree char *networkstr = NULL; + virFirewallLayer layer = VIR_SOCKET_ADDR_FAMILY(netaddr) == AF_INET ? + VIR_FIREWALL_LAYER_IPV4 : VIR_FIREWALL_LAYER_IPV6; + const char *layerStr = nftablesLayerTypeToString(layer); + virFirewallCmd *fwCmd; + + if (!(networkstr = virSocketAddrFormatWithPrefix(netaddr, prefix, true))) + return -1; + + fwCmd = virFirewallAddCmd(fw, layer, "insert", "rule", + layerStr, VIR_NFTABLES_PRIVATE_TABLE, + VIR_NFTABLES_NAT_POSTROUTE_CHAIN, NULL); + + if (physdev && physdev[0]) + virFirewallCmdAddArgList(fw, fwCmd, "oifname", physdev, NULL); + + virFirewallCmdAddArgList(fw, fwCmd, + layerStr, "saddr", networkstr, + layerStr, "daddr", destaddr, + "counter", "return", NULL); + return 0; +} + + +static const char networkLocalMulticastIPv4[] = "224.0.0.0/24"; +static const char networkLocalMulticastIPv6[] = "ff02::/16"; +static const char networkLocalBroadcast[] = "255.255.255.255/32"; + + +static int +nftablesAddMasqueradingFirewallRules(virFirewall *fw, + virNetworkDef *def, + virNetworkIPDef *ipdef) +{ + int prefix = virNetworkIPDefPrefix(ipdef); + const char *forwardIf = virNetworkDefForwardIf(def, 0); + bool isIPv4 = VIR_SOCKET_ADDR_IS_FAMILY(&ipdef->address, AF_INET); + + if (prefix < 0) { + virReportError(VIR_ERR_INTERNAL_ERROR, + _("Invalid prefix or netmask for '%1$s'"), + def->bridge); + return -1; + } + + /* allow forwarding packets from the bridge interface */ + if (nftablesAddForwardAllowOut(fw, + &ipdef->address, + prefix, + def->bridge, + forwardIf) < 0) + return -1; + + /* allow forwarding packets to the bridge interface if they are + * part of an existing connection + */ + if (nftablesAddForwardAllowRelatedIn(fw, + &ipdef->address, + prefix, + def->bridge, + forwardIf) < 0) + return -1; + + /* + * Enable masquerading. + * + * We need to end up with 5 rules in the table in this order + * + * 1. do not masquerade packets targeting 224.0.0.0/24 + * 2. do not masquerade packets targeting 255.255.255.255/32 + * 3. masquerade protocol=tcp with sport mapping restriction + * 4. masquerade protocol=udp with sport mapping restriction + * 5. generic, masquerade any protocol + * + * 224.0.0.0/24 is the local network multicast range. Packets are not + * forwarded outside. + * + * 255.255.255.255/32 is the broadcast address of any local network. Again, + * such packets are never forwarded, but strict DHCP clients don't accept + * DHCP replies with changed source ports. + * + * The sport mappings are required, because default Nftables + * MASQUERADE maintain port numbers unchanged where possible. + * + * NFS can be configured to only "trust" port numbers < 1023. + * + * Guests using NAT thus need to be prevented from having port + * numbers < 1023, otherwise they can bypass the NFS "security" + * check on the source port number. + * + * Since we use '--insert' to add rules to the header of the + * chain, we actually need to add them in the reverse of the + * order just mentioned ! + */ + + /* First the generic masquerade rule for other protocols */ + if (nftablesAddForwardMasquerade(fw, + &ipdef->address, + prefix, + forwardIf, + &def->forward.addr, + &def->forward.port, + NULL) < 0) + return -1; + + /* UDP with a source port restriction */ + if (nftablesAddForwardMasquerade(fw, + &ipdef->address, + prefix, + forwardIf, + &def->forward.addr, + &def->forward.port, + "udp") < 0) + return -1; + + /* TCP with a source port restriction */ + if (nftablesAddForwardMasquerade(fw, + &ipdef->address, + prefix, + forwardIf, + &def->forward.addr, + &def->forward.port, + "tcp") < 0) + return -1; + + /* exempt local network broadcast address as destination */ + if (isIPv4 && + nftablesAddDontMasquerade(fw, + &ipdef->address, + prefix, + forwardIf, + networkLocalBroadcast) < 0) + return -1; + + /* exempt local multicast range as destination */ + if (nftablesAddDontMasquerade(fw, + &ipdef->address, + prefix, + forwardIf, + isIPv4 ? networkLocalMulticastIPv4 : + networkLocalMulticastIPv6) < 0) + return -1; + + return 0; +} + + +static int +nftablesAddRoutingFirewallRules(virFirewall *fw, + virNetworkDef *def, + virNetworkIPDef *ipdef) +{ + int prefix = virNetworkIPDefPrefix(ipdef); + const char *forwardIf = virNetworkDefForwardIf(def, 0); + + if (prefix < 0) { + virReportError(VIR_ERR_INTERNAL_ERROR, + _("Invalid prefix or netmask for '%1$s'"), + def->bridge); + return -1; + } + + /* allow routing packets from the bridge interface */ + if (nftablesAddForwardAllowOut(fw, + &ipdef->address, + prefix, + def->bridge, + forwardIf) < 0) + return -1; + + /* allow routing packets to the bridge interface */ + if (nftablesAddForwardAllowIn(fw, + &ipdef->address, + prefix, + def->bridge, + forwardIf) < 0) + return -1; + + return 0; +} + + +static void +nftablesAddGeneralIPv4FirewallRules(virFirewall *fw, + virNetworkDef *def) +{ + size_t i; + virNetworkIPDef *ipv4def; + + /* First look for first IPv4 address that has dhcp or tftpboot defined. */ + /* We support dhcp config on 1 IPv4 interface only. */ + for (i = 0; + (ipv4def = virNetworkDefGetIPByIndex(def, AF_INET, i)); + i++) { + if (ipv4def->nranges || ipv4def->nhosts || ipv4def->tftproot) + break; + } + + /* allow DHCP requests through to dnsmasq & back out */ + nftablesAddTcpInput(fw, VIR_FIREWALL_LAYER_IPV4, def->bridge, 67); + nftablesAddUdpInput(fw, VIR_FIREWALL_LAYER_IPV4, def->bridge, 67); + nftablesAddTcpOutput(fw, VIR_FIREWALL_LAYER_IPV4, def->bridge, 68); + nftablesAddUdpOutput(fw, VIR_FIREWALL_LAYER_IPV4, def->bridge, 68); + + /* allow DNS requests through to dnsmasq & back out */ + nftablesAddTcpInput(fw, VIR_FIREWALL_LAYER_IPV4, def->bridge, 53); + nftablesAddUdpInput(fw, VIR_FIREWALL_LAYER_IPV4, def->bridge, 53); + nftablesAddTcpOutput(fw, VIR_FIREWALL_LAYER_IPV4, def->bridge, 53); + nftablesAddUdpOutput(fw, VIR_FIREWALL_LAYER_IPV4, def->bridge, 53); + + /* allow TFTP requests through to dnsmasq if necessary & back out */ + if (ipv4def && ipv4def->tftproot) { + nftablesAddUdpInput(fw, VIR_FIREWALL_LAYER_IPV4, def->bridge, 69); + nftablesAddUdpOutput(fw, VIR_FIREWALL_LAYER_IPV4, def->bridge, 69); + } + + /* Catch all rules to block forwarding to/from bridges */ + nftablesAddForwardRejectOut(fw, VIR_FIREWALL_LAYER_IPV4, def->bridge); + nftablesAddForwardRejectIn(fw, VIR_FIREWALL_LAYER_IPV4, def->bridge); + + /* Allow traffic between guests on the same bridge */ + nftablesAddForwardAllowCross(fw, VIR_FIREWALL_LAYER_IPV4, def->bridge); +} + + +/* Add all once/network rules required for IPv6. + * If no IPv6 addresses are defined and <network ipv6='yes'> is + * specified, then allow IPv6 communications between virtual systems. + * If any IPv6 addresses are defined, then add the rules for regular operation. + */ +static void +nftablesAddGeneralIPv6FirewallRules(virFirewall *fw, + virNetworkDef *def) +{ + if (!virNetworkDefGetIPByIndex(def, AF_INET6, 0) && + !def->ipv6nogw) { + return; + } + + /* Catch all rules to block forwarding to/from bridges */ + nftablesAddForwardRejectOut(fw, VIR_FIREWALL_LAYER_IPV6, def->bridge); + nftablesAddForwardRejectIn(fw, VIR_FIREWALL_LAYER_IPV6, def->bridge); + + /* Allow traffic between guests on the same bridge */ + nftablesAddForwardAllowCross(fw, VIR_FIREWALL_LAYER_IPV6, def->bridge); + + if (virNetworkDefGetIPByIndex(def, AF_INET6, 0)) { + /* allow DNS over IPv6 & back out */ + nftablesAddTcpInput(fw, VIR_FIREWALL_LAYER_IPV6, def->bridge, 53); + nftablesAddUdpInput(fw, VIR_FIREWALL_LAYER_IPV6, def->bridge, 53); + nftablesAddTcpOutput(fw, VIR_FIREWALL_LAYER_IPV6, def->bridge, 53); + nftablesAddUdpOutput(fw, VIR_FIREWALL_LAYER_IPV6, def->bridge, 53); + /* allow DHCPv6 & back out */ + nftablesAddUdpInput(fw, VIR_FIREWALL_LAYER_IPV6, def->bridge, 547); + nftablesAddUdpOutput(fw, VIR_FIREWALL_LAYER_IPV6, def->bridge, 546); + } +} + + +static void +nftablesAddGeneralFirewallRules(virFirewall *fw, + virNetworkDef *def) +{ + nftablesAddGeneralIPv4FirewallRules(fw, def); + nftablesAddGeneralIPv6FirewallRules(fw, def); +} + + +static int +nftablesAddIPSpecificFirewallRules(virFirewall *fw, + virNetworkDef *def, + virNetworkIPDef *ipdef) +{ + /* NB: in the case of IPv6, routing rules are added when the + * forward mode is NAT. This is because IPv6 has no NAT. + */ + + if (def->forward.type == VIR_NETWORK_FORWARD_NAT) { + if (VIR_SOCKET_ADDR_IS_FAMILY(&ipdef->address, AF_INET) || + def->forward.natIPv6 == VIR_TRISTATE_BOOL_YES) + return nftablesAddMasqueradingFirewallRules(fw, def, ipdef); + else if (VIR_SOCKET_ADDR_IS_FAMILY(&ipdef->address, AF_INET6)) + return nftablesAddRoutingFirewallRules(fw, def, ipdef); + } else if (def->forward.type == VIR_NETWORK_FORWARD_ROUTE) { + return nftablesAddRoutingFirewallRules(fw, def, ipdef); + } + return 0; +} + + +/* nftablesAddFirewallrules: + * + * @def - the network that needs an nftables firewall added + * @fwRemoval - if this is not NULL, it points to a pointer + * that should be filled in with a virFirewall object containing + * all the commands needed to remove this firewall at a later time. + * + * Add all rules for all ip addresses (and general rules) on a + * network, and optionally return a virFirewall object containing all + * the rules needed to later remove the firewall that has been added. + */ +int +nftablesAddFirewallRules(virNetworkDef *def, virFirewall **fwRemoval) +{ + size_t i; + virNetworkIPDef *ipdef; + g_autoptr(virFirewall) fw = virFirewallNew(VIR_FIREWALL_BACKEND_NFTABLES); + + virFirewallStartTransaction(fw, VIR_FIREWALL_TRANSACTION_AUTO_ROLLBACK); + + nftablesAddGeneralFirewallRules(fw, def); + + for (i = 0; + (ipdef = virNetworkDefGetIPByIndex(def, AF_UNSPEC, i)); + i++) { + if (nftablesAddIPSpecificFirewallRules(fw, def, ipdef) < 0) + return -1; + } + + if (virFirewallApply(fw) < 0) + return -1; + + if (fwRemoval) { + /* caller wants us to create a virFirewall object that can be + * applied to undo everything that was just done by * virFirewallApply() + */ + + if (virFirewallNewFromRollback(fw, fwRemoval) < 0) + return -1; + } + + return 0; +} diff --git a/src/network/network_nftables.h b/src/network/network_nftables.h new file mode 100644 index 0000000000..5abae3a423 --- /dev/null +++ b/src/network/network_nftables.h @@ -0,0 +1,28 @@ +/* + * network_nftables.h: helper APIs for managing nftables in network driver + * + * Copyright (C) 2024 Red Hat, Inc. + * + * This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public + * License as published by the Free Software Foundation; either + * version 2.1 of the License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this library. If not, see + * <http://www.gnu.org/licenses/>;. + */ + +#pragma once + +#include "virfirewall.h" +#include "network_conf.h" + +int nftablesAddFirewallRules(virNetworkDef *def, virFirewall **fwRemoval); + +int nftablesSetupPrivateChains(virFirewallLayer layer); diff --git a/src/util/virfirewall.c b/src/util/virfirewall.c index 649b2289c0..2219506b18 100644 --- a/src/util/virfirewall.c +++ b/src/util/virfirewall.c @@ -37,7 +37,8 @@ VIR_LOG_INIT("util.firewall"); VIR_ENUM_IMPL(virFirewallBackend, VIR_FIREWALL_BACKEND_LAST, - "iptables"); + "iptables", + "nftables"); VIR_ENUM_DECL(virFirewallLayer); VIR_ENUM_IMPL(virFirewallLayer, @@ -653,6 +654,153 @@ virFirewallCmdIptablesApply(virFirewall *firewall, } +#define VIR_NFTABLES_ARG_IS_CREATE(arg) \ + (STREQ(arg, "insert") || STREQ(arg, "add") || STREQ(arg, "create")) + +static int +virFirewallCmdNftablesApply(virFirewall *firewall G_GNUC_UNUSED, + virFirewallCmd *fwCmd, + char **output) +{ + bool needRollback = false; + size_t cmdIdx = 0; + const char *objectType = NULL; + g_autoptr(virCommand) cmd = NULL; + g_autofree char *cmdStr = NULL; + g_autofree char *error = NULL; + size_t i; + int status; + + cmd = virCommandNew(NFT); + + if ((virFirewallTransactionGetFlags(firewall) & VIR_FIREWALL_TRANSACTION_AUTO_ROLLBACK) && + fwCmd->argsLen > 1) { + /* skip any leading options to get to command verb */ + for (i = 0; i < fwCmd->argsLen - 1; i++) { + if (fwCmd->args[i][0] != '-') + break; + } + + if (i + 1 < fwCmd->argsLen && + VIR_NFTABLES_ARG_IS_CREATE(fwCmd->args[i])) { + + cmdIdx = i; + objectType = fwCmd->args[i + 1]; + + /* we currently only handle auto-rollback for rules, + * chains, and tables, and those all can be "rolled + * back" by a delete command using the handle that is + * returned when "-ae" is added to the add/insert + * command. + */ + if (STREQ_NULLABLE(objectType, "rule") || + STREQ_NULLABLE(objectType, "chain") || + STREQ_NULLABLE(objectType, "table")) { + + needRollback = true; + /* this option to nft instructs it to add the + * "handle" of the created object to stdout + */ + virCommandAddArg(cmd, "-ae"); + } + } + } + + for (i = 0; i < fwCmd->argsLen; i++) + virCommandAddArg(cmd, fwCmd->args[i]); + + cmdStr = virCommandToString(cmd, false); + VIR_INFO("Applying '%s'", NULLSTR(cmdStr)); + + virCommandSetOutputBuffer(cmd, output); + virCommandSetErrorBuffer(cmd, &error); + + if (virCommandRun(cmd, &status) < 0) + return -1; + + if (status != 0) { + if (STREQ_NULLABLE(fwCmd->args[0], "list")) { + /* nft returns error status when the target of a "list" + * command doesn't exist, but we always want to just have + * an empty result, so this is not actually an error. + */ + } else if (fwCmd->ignoreErrors) { + VIR_DEBUG("Ignoring error running command"); + } else { + virReportError(VIR_ERR_INTERNAL_ERROR, + _("Failed to apply firewall command '%1$s': %2$s"), + NULLSTR(cmdStr), NULLSTR(error)); + VIR_FREE(*output); + return -1; + } + + /* there was an error, so we won't be building any rollback command, + * but the error should be ignored, so we return success + */ + return 0; + } + + if (needRollback) { + virFirewallCmd *rollback = virFirewallAddRollbackCmd(firewall, fwCmd->layer, NULL); + const char *handleStart = NULL; + size_t handleLen = 0; + g_autofree char *handleStr = NULL; + g_autofree char *rollbackStr = NULL; + + /* Search for "# handle n" in stdout of the nft add command - + * that is the handle of the table/rule/chain that will later + * need to be deleted. + */ + + if ((handleStart = strstr(*output, "# handle "))) { + handleStart += 9; /* move past "# handle " */ + handleLen = strspn(handleStart, "0123456789"); + } + + if (!handleLen) { + virReportError(VIR_ERR_INTERNAL_ERROR, + _("couldn't register rollback command - command '%1$s' had no valid handle in output ('%2$s')"), + NULLSTR(cmdStr), NULLSTR(*output)); + return -1; + } + + handleStr = g_strdup_printf("%.*s", (int)handleLen, handleStart); + + /* The rollback command is created from the original command like this: + * + * 1) skip any leading options + * 2) replace add/insert with delete + * 3) keep the type of item being added (rule/chain/table) + * 4) keep the class (ip/ip6/inet) + * 5) for chain/rule, keep the table name + * 6) for rule, keep the chain name + * 7) add "handle n" where "n" is parsed from the + * stdout of the original nft command + */ + virFirewallCmdAddArgList(firewall, rollback, "delete", objectType, + fwCmd->args[cmdIdx + 2], /* ip/ip6/inet */ + NULL); + + if (STREQ_NULLABLE(objectType, "rule") || + STREQ_NULLABLE(objectType, "chain")) { + /* include table name in command */ + virFirewallCmdAddArg(firewall, rollback, fwCmd->args[cmdIdx + 3]); + } + + if (STREQ_NULLABLE(objectType, "rule")) { + /* include chain name in command */ + virFirewallCmdAddArg(firewall, rollback, fwCmd->args[cmdIdx + 4]); + } + + virFirewallCmdAddArgList(firewall, rollback, "handle", handleStr, NULL); + + rollbackStr = virFirewallCmdToString(NFT, rollback); + VIR_DEBUG("Recording Rollback command '%s'", NULLSTR(rollbackStr)); + } + return 0; +} + + static int virFirewallApplyCmd(virFirewall *firewall, virFirewallCmd *fwCmd) @@ -666,8 +814,23 @@ virFirewallApplyCmd(virFirewall *firewall, return -1; } - if (virFirewallCmdIptablesApply(firewall, fwCmd, &output) < 0) + switch (virFirewallGetBackend(firewall)) { + case VIR_FIREWALL_BACKEND_IPTABLES: + if (virFirewallCmdIptablesApply(firewall, fwCmd, &output) < 0) + return -1; + break; + + case VIR_FIREWALL_BACKEND_NFTABLES: + if (virFirewallCmdNftablesApply(firewall, fwCmd, &output) < 0) + return -1; + break; + + case VIR_FIREWALL_BACKEND_LAST: + default: + virReportEnumRangeError(virFirewallBackend, + virFirewallGetBackend(firewall)); return -1; + } if (fwCmd->queryCB && output) { if (!(lines = g_strsplit(output, "\n", -1))) diff --git a/src/util/virfirewall.h b/src/util/virfirewall.h index 4ac16f02b3..302a6a4e5b 100644 --- a/src/util/virfirewall.h +++ b/src/util/virfirewall.h @@ -29,6 +29,7 @@ #define EBTABLES "ebtables" #define IPTABLES "iptables" #define IP6TABLES "ip6tables" +#define NFT "nft" typedef struct _virFirewall virFirewall; @@ -44,6 +45,7 @@ typedef enum { typedef enum { VIR_FIREWALL_BACKEND_IPTABLES, + VIR_FIREWALL_BACKEND_NFTABLES, VIR_FIREWALL_BACKEND_LAST, } virFirewallBackend; -- 2.45.0