12:48 p.m.
A patch submitted by Steven Malin last week pointed out a problem with
libvirt's DNS SRV record configuration:
https://www.redhat.com/archives/libvir-list/2014-March/msg00536.html
When searching for that message later, I found another series that had
been posted by Guannan Ren back in 2012 that somehow slipped between
the cracks:
https://www.redhat.com/archives/libvir-list/2012-July/msg00236.html
That patch was very much out of date, but also pointed out some real
problems.
This patch fixes all the noted problems by refactoring
virNetworkDNSSrvDefParseXML() and networkDnsmasqConfContents(), then
verifies those fixes by added several new records to the test case.
Problems fixed:
* both service and protocol now have an underscore ("_") prepended on
the commandline, as required by RFC2782.
<srv service='sip' protocol='udp' domain='example.com'
target='tests.example.com' port='5060' priority='10'
weight='150'/>
before: srv-host=sip.udp.example.com,tests.example.com,5060,10,150
after: srv-host=_sip._udp.example.com,tests.example.com,5060,10,150
* if "domain" wasn't specified in the <srv> element, the extra
trailing "." will no longer be added to the dnsmasq commandline.
<srv service='sip' protocol='udp' target='tests.example.com'
port='5060' priority='10' weight='150'/>
before: srv-host=sip.udp.,tests.example.com,5060,10,150
after: srv-host=_sip._udp,tests.example.com,5060,10,150
* when optional attributes aren't specified, the separating comma is
also now not placed on the dnsmasq commandline. If optional
attributes in the middle of the line are not specified, they are
replaced with a default value in the commandline (1 for port, 0 for
priority and weight).
<srv service='sip' protocol='udp' target='tests.example.com'
port='5060'/>
before: srv-host=sip.udp.,tests.example.com,5060,,
after: srv-host=_sip._udp,tests.example.com,5060
(actually the would have generated an error, because "optional"
attributes weren't really optional.)
* The allowed characters for both service and protocol are now limited
to alphanumerics, plus a few special characters that are found in
existing names in /etc/services and /etc/protocols. (One exception
is that both of these files contain names with an embedded ".", but
"." can't be used in these fields of an SRV record because it is
used as a field separator and there is no method to escape a "."
into a field.) (Previously only the strings "tcp" and "udp" were
allowed for protocol, but this restriction has been removed, since
RFC2782 specifically says that it isn't limited to those, and that
anyway it is case insensitive.)
* the "domain" attribute is no longer required in order to recognize
the port, priority, and weight attributes during parsing. Only
"target" is required for this.
* if "target" isn't specified, port, priority, and weight are not
allowed (since they are meaningless - an empty target means "this
service is *not available* for this domain").
* port, priority, and weight are now truly optional, as the comments
originally suggested, but which was not actually true.
---
Changes from V1:
https://www.redhat.com/archives/libvir-list/2014-March/msg01172.html
src/conf/network_conf.c | 129 ++++++++++++++-------
src/network/bridge_driver.c | 80 ++++++++-----
.../nat-network-dns-srv-record-minimal.conf | 2 +-
.../nat-network-dns-srv-record.conf | 8 +-
.../nat-network-dns-srv-record.xml | 8 +-
5 files changed, 149 insertions(+), 78 deletions(-)
diff --git a/src/conf/network_conf.c b/src/conf/network_conf.c
index 9be06d3..f1e6243 100644
--- a/src/conf/network_conf.c
+++ b/src/conf/network_conf.c
@@ -924,6 +924,21 @@ error:
return -1;
}
+/* This includes all characters used in the names of current
+ * /etc/services and /etc/protocols files (on Fedora 20), except ".",
+ * which we can't allow because it would conflict with the use of "."
+ * as a field separator in the SRV record, there appears to be no way
+ * to escape it in, and the protocols/services that use "." in the
+ * name are obscure and unlikely to be used anyway.
+ */
+#define PROTOCOL_CHARS \
+ "abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789" \
+ "-+/"
+
+#define SERVICE_CHARS \
+ "abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789" \
+ "_-+/*"
+
static int
virNetworkDNSSrvDefParseXML(const char *networkName,
xmlNodePtr node,
@@ -931,80 +946,108 @@ virNetworkDNSSrvDefParseXML(const char *networkName,
virNetworkDNSSrvDefPtr def,
bool partialOkay)
{
+ int ret;
+ xmlNodePtr save_ctxt = ctxt->node;
+
+ ctxt->node = node;
+
if (!(def->service = virXMLPropString(node, "service")) &&
!partialOkay) {
virReportError(VIR_ERR_XML_DETAIL,
_("Missing required service attribute in DNS SRV record
"
"of network %s"), networkName);
goto error;
}
- if (def->service && strlen(def->service) > DNS_RECORD_LENGTH_SRV) {
- virReportError(VIR_ERR_XML_DETAIL,
- _("Service name '%s' in network %s is too long, limit
is %d bytes"),
- def->service, networkName, DNS_RECORD_LENGTH_SRV);
- goto error;
+ if (def->service) {
+ if (strlen(def->service) > DNS_RECORD_LENGTH_SRV) {
+ virReportError(VIR_ERR_XML_DETAIL,
+ _("service attribute '%s' in network %s is too
long, "
+ "limit is %d bytes"),
+ def->service, networkName, DNS_RECORD_LENGTH_SRV);
+ goto error;
+ }
+ if (strspn(def->service, SERVICE_CHARS) < strlen(def->service)) {
+ virReportError(VIR_ERR_XML_DETAIL,
+ _("invalid character in service attribute '%s'
"
+ "in network %s DNS SRV record"),
+ def->service, networkName);
+ goto error;
+ }
}
if (!(def->protocol = virXMLPropString(node, "protocol")) &&
!partialOkay) {
virReportError(VIR_ERR_XML_DETAIL,
_("Missing required protocol attribute "
- "in dns srv record '%s' of network %s"),
+ "in DNS SRV record '%s' of network %s"),
def->service, networkName);
goto error;
}
-
- /* Check whether protocol value is the supported one */
- if (def->protocol && STRNEQ(def->protocol, "tcp") &&
- (STRNEQ(def->protocol, "udp"))) {
+ if (def->protocol &&
+ strspn(def->protocol, PROTOCOL_CHARS) < strlen(def->protocol)) {
virReportError(VIR_ERR_XML_DETAIL,
- _("Invalid protocol attribute value '%s' "
- "in DNS SRV record of network %s"),
+ _("invalid character in protocol attribute '%s'
"
+ "in network %s DNS SRV record"),
def->protocol, networkName);
goto error;
}
/* Following attributes are optional */
- if ((def->target = virXMLPropString(node, "target")) &&
- (def->domain = virXMLPropString(node, "domain"))) {
- xmlNodePtr save_ctxt = ctxt->node;
-
- ctxt->node = node;
- if (virXPathUInt("string(./@port)", ctxt, &def->port) < 0 ||
- def->port > 65535) {
- virReportError(VIR_ERR_XML_DETAIL,
- _("Missing or invalid port attribute "
- "in network %s"), networkName);
- goto error;
- }
-
- if (virXPathUInt("string(./@priority)", ctxt, &def->priority)
< 0 ||
- def->priority > 65535) {
- virReportError(VIR_ERR_XML_DETAIL,
- _("Missing or invalid priority attribute "
- "in network %s"), networkName);
- goto error;
- }
+ def->domain = virXMLPropString(node, "domain");
+ def->target = virXMLPropString(node, "target");
- if (virXPathUInt("string(./@weight)", ctxt, &def->weight) < 0
||
- def->weight > 65535) {
- virReportError(VIR_ERR_XML_DETAIL,
- _("Missing or invalid weight attribute "
- "in network %s"), networkName);
- goto error;
- }
+ ret = virXPathUInt("string(./@port)", ctxt, &def->port);
+ if (ret >= 0 && !def->target) {
+ virReportError(VIR_ERR_XML_DETAIL,
+ _("DNS SRV port attribute not permitted without "
+ "target for service %s in network %s"),
+ def->service, networkName);
+ goto error;
+ }
+ if (ret == -2 || (ret >= 0 && (def->port < 1 || def->port >
65535))) {
+ virReportError(VIR_ERR_XML_DETAIL,
+ _("Invalid DNS SRV port attribute "
+ "for service %s in network %s"),
+ def->service, networkName);
+ goto error;
+ }
- ctxt->node = save_ctxt;
+ ret = virXPathUInt("string(./@priority)", ctxt, &def->priority);
+ if (ret >= 0 && !def->target) {
+ virReportError(VIR_ERR_XML_DETAIL,
+ _("DNS SRV priority attribute not permitted without "
+ "target for service %s in network %s"),
+ def->service, networkName);
+ goto error;
+ }
+ if (ret == -2 || (ret >= 0 && def->priority > 65535)) {
+ virReportError(VIR_ERR_XML_DETAIL,
+ _("Invalid DNS SRV priority attribute "
+ "for service %s in network %s"),
+ def->service, networkName);
+ goto error;
}
- if (!(def->service || def->protocol)) {
+ ret = virXPathUInt("string(./@weight)", ctxt, &def->weight);
+ if (ret >= 0 && !def->target) {
virReportError(VIR_ERR_XML_DETAIL,
- _("Missing required service attribute or protocol "
- "in DNS SRV record of network %s"), networkName);
+ _("DNS SRV weight attribute not permitted without "
+ "target for service %s in network %s"),
+ def->service, networkName);
+ goto error;
+ }
+ if (ret == -2 || (ret >= 0 && def->weight > 65535)) {
+ virReportError(VIR_ERR_XML_DETAIL,
+ _("Invalid DNS SRV weight attribute "
+ "for service %s in network %s"),
+ def->service, networkName);
goto error;
}
+
+ ctxt->node = save_ctxt;
return 0;
error:
virNetworkDNSSrvDefClear(def);
+ ctxt->node = save_ctxt;
return -1;
}
diff --git a/src/network/bridge_driver.c b/src/network/bridge_driver.c
index 59b6c09..e256dba 100644
--- a/src/network/bridge_driver.c
+++ b/src/network/bridge_driver.c
@@ -736,10 +736,6 @@ networkDnsmasqConfContents(virNetworkObjPtr network,
int r, ret = -1;
int nbleases = 0;
size_t i;
- char *record = NULL;
- char *recordPort = NULL;
- char *recordWeight = NULL;
- char *recordPriority = NULL;
virNetworkDNSDefPtr dns = &network->def->dns;
virNetworkIpDefPtr tmpipdef, ipdef, ipv4def, ipv6def;
bool ipv6SLAAC;
@@ -880,33 +876,57 @@ networkDnsmasqConfContents(virNetworkObjPtr network,
}
for (i = 0; i < dns->nsrvs; i++) {
- if (dns->srvs[i].service && dns->srvs[i].protocol) {
- if (dns->srvs[i].port &&
- virAsprintf(&recordPort, "%d", dns->srvs[i].port) <
0)
- goto cleanup;
- if (dns->srvs[i].priority &&
- virAsprintf(&recordPriority, "%d",
dns->srvs[i].priority) < 0)
- goto cleanup;
- if (dns->srvs[i].weight &&
- virAsprintf(&recordWeight, "%d", dns->srvs[i].weight)
< 0)
- goto cleanup;
+ /* service/protocol are required, and should have been validated
+ * by the parser.
+ */
+ if (!dns->srvs[i].service) {
+ virReportError(VIR_ERR_INTERNAL_ERROR,
+ _("Missing required 'service' "
+ "attribute in SRV record of network
'%s'"),
+ network->def->name);
+ goto cleanup;
+ }
+ if (!dns->srvs[i].protocol) {
+ virReportError(VIR_ERR_INTERNAL_ERROR,
+ _("Missing required 'service' "
+ "attribute in SRV record of network
'%s'"),
+ network->def->name);
+ goto cleanup;
+ }
+ /* RFC2782 requires that service and protocol be preceded by
+ * an underscore.
+ */
+ virBufferAsprintf(&configbuf, "srv-host=_%s._%s",
+ dns->srvs[i].service, dns->srvs[i].protocol);
- if (virAsprintf(&record, "%s.%s.%s,%s,%s,%s,%s",
- dns->srvs[i].service,
- dns->srvs[i].protocol,
- dns->srvs[i].domain ? dns->srvs[i].domain :
"",
- dns->srvs[i].target ? dns->srvs[i].target :
"",
- recordPort ? recordPort : "",
- recordPriority ? recordPriority : "",
- recordWeight ? recordWeight : "")
< 0)
- goto cleanup;
+ /* domain is optional - it defaults to the domain of this network */
+ if (dns->srvs[i].domain)
+ virBufferAsprintf(&configbuf, ".%s", dns->srvs[i].domain);
- virBufferAsprintf(&configbuf, "srv-host=%s\n", record);
- VIR_FREE(record);
- VIR_FREE(recordPort);
- VIR_FREE(recordWeight);
- VIR_FREE(recordPriority);
+ /* If target is empty or ".", that means "the service is
+ * decidedly not available at this domain" (RFC2782). In that
+ * case, any port, priority, or weight is irrelevant.
+ */
+ if (dns->srvs[i].target && STRNEQ(dns->srvs[i].target,
".")) {
+
+ virBufferAsprintf(&configbuf, ",%s", dns->srvs[i].target);
+ /* port, priority, and weight are optional, but are
+ * identified by their position in the line. If an item is
+ * unspecified, but something later in the line *is*
+ * specified, we need to give the default value for the
+ * unspecified item. (According to the dnsmasq manpage,
+ * the default for port is 1).
+ */
+ if (dns->srvs[i].port ||
+ dns->srvs[i].priority || dns->srvs[i].weight)
+ virBufferAsprintf(&configbuf, ",%d",
+ dns->srvs[i].port ? dns->srvs[i].port : 1);
+ if (dns->srvs[i].priority || dns->srvs[i].weight)
+ virBufferAsprintf(&configbuf, ",%d",
dns->srvs[i].priority);
+ if (dns->srvs[i].weight)
+ virBufferAsprintf(&configbuf, ",%d",
dns->srvs[i].weight);
}
+ virBufferAddLit(&configbuf, "\n");
}
/* Find the first dhcp for both IPv4 and IPv6 */
@@ -1082,10 +1102,6 @@ networkDnsmasqConfContents(virNetworkObjPtr network,
cleanup:
virBufferFreeAndReset(&configbuf);
- VIR_FREE(record);
- VIR_FREE(recordPort);
- VIR_FREE(recordWeight);
- VIR_FREE(recordPriority);
return ret;
}
diff --git a/tests/networkxml2confdata/nat-network-dns-srv-record-minimal.conf
b/tests/networkxml2confdata/nat-network-dns-srv-record-minimal.conf
index ce4dd6f..e60411b 100644
--- a/tests/networkxml2confdata/nat-network-dns-srv-record-minimal.conf
+++ b/tests/networkxml2confdata/nat-network-dns-srv-record-minimal.conf
@@ -12,7 +12,7 @@ listen-address=192.168.123.1
listen-address=fc00:db8:ac10:fe01::1
listen-address=fc00:db8:ac10:fd01::1
listen-address=10.24.10.1
-srv-host=name.tcp.,,,,
+srv-host=_name._tcp
dhcp-range=192.168.122.2,192.168.122.254
dhcp-no-override
dhcp-leasefile=/var/lib/libvirt/dnsmasq/default.leases
diff --git a/tests/networkxml2confdata/nat-network-dns-srv-record.conf
b/tests/networkxml2confdata/nat-network-dns-srv-record.conf
index b47cbe7..16e7dca 100644
--- a/tests/networkxml2confdata/nat-network-dns-srv-record.conf
+++ b/tests/networkxml2confdata/nat-network-dns-srv-record.conf
@@ -8,7 +8,13 @@ strict-order
except-interface=lo
bind-dynamic
interface=virbr0
-srv-host=name.tcp.test-domain-name,.,1024,10,10
+srv-host=_name._tcp.test-domain-name.com,test.example.com,1111,11,111
+srv-host=_name2._udp,test2.example.com,2222,22,222
+srv-host=_name3._tcp.test3.com,test3.example.com,3333,33
+srv-host=_name4._tcp.test4.com,test4.example.com,4444
+srv-host=_name5._udp,test5.example.com,1,55,555
+srv-host=_name6._tcp.test6.com,test6.example.com,6666,0,666
+srv-host=_name7._tcp.test7.com,test7.example.com,1,0,777
dhcp-range=192.168.122.2,192.168.122.254
dhcp-no-override
dhcp-leasefile=/var/lib/libvirt/dnsmasq/default.leases
diff --git a/tests/networkxml2confdata/nat-network-dns-srv-record.xml
b/tests/networkxml2confdata/nat-network-dns-srv-record.xml
index 3dd19e6..d01b331 100644
--- a/tests/networkxml2confdata/nat-network-dns-srv-record.xml
+++ b/tests/networkxml2confdata/nat-network-dns-srv-record.xml
@@ -6,7 +6,13 @@
</forward>
<bridge name='virbr0' stp='on' delay='0'/>
<dns>
- <srv service='name' protocol='tcp'
domain='test-domain-name' target='.' port='1024'
priority='10' weight='10'/>
+ <srv service='name' protocol='tcp'
domain='test-domain-name.com' target='test.example.com'
port='1111' priority='11' weight='111'/>
+ <srv service='name2' protocol='udp'
target='test2.example.com' port='2222' priority='22'
weight='222'/>
+ <srv service='name3' protocol='tcp' domain='test3.com'
target='test3.example.com' port='3333' priority='33'/>
+ <srv service='name4' protocol='tcp' domain='test4.com'
target='test4.example.com' port='4444'/>
+ <srv service='name5' protocol='udp'
target='test5.example.com' priority='55' weight='555'/>
+ <srv service='name6' protocol='tcp' domain='test6.com'
target='test6.example.com' port='6666' weight='666'/>
+ <srv service='name7' protocol='tcp' domain='test7.com'
target='test7.example.com' weight='777'/>
</dns>
<ip address='192.168.122.1' netmask='255.255.255.0'>
<dhcp>
--
1.8.5.3