[libvirt PATCH v2 0/1] Ignore EPERM on attempts to clear a VF VLAN ID

SmartNIC DPUs may not expose some privileged eswitch operations to the hypervisor hosts. For example, this happens with Bluefield devices running in the ECPF (default) mode [1] for security reasons. While VF MAC address programming is possible via an RTM_SETLINK operation, trying to set a VLAN ID in the same operation will fail with EPERM. In the kernel a relevant call chain may look like do_setlink -> do_setvfinfo -> dev->netdev_ops->set_vf_vlan which calls a driver-specific function like [2] eventually. The equivalent ip link commands below provide an illustration: 1. This works: sudo ip link set enp130s0f0 vf 2 mac de:ad:be:ef:ca:fe 2. Setting (or clearing) a VLAN fails with EPERM: sudo ip link set enp130s0f0 vf 2 vlan 0 RTNETLINK answers: Operation not permitted 3. This is what Libvirt attempts to do today (when trying to clear a VF VLAN at the same time as programming a VF MAC). sudo ip link set enp130s0f0 vf 2 vlan 0 mac de:ad:be:ef:ca:fe RTNETLINK answers: Operation not permitted If setting an explicit VLAN ID results in an EPERM, clearing a VLAN (setting a VLAN ID to 0) can be handled gracefully by ignoring the EPERM error with the rationale being that if we cannot set this state in the first place, we cannot clear it either. Thus, virNetDevSetVfConfig is split into two distinct functions. If clearing a VLAN ID fails with EPERM, the error is simply ignored. Both new functions rely virNetDevSendVfSetLinkRequest that implements common functionality related to formatting a request, sending it and handling error conditions and returns 0 or an error since in both cases the payload is either NLMSG_DONE (no error) or NLMSG_ERROR where an error message is needed by the caller to handle known cases appropriately. This function allows the conditional code to be unit tested. An alternative to this could be providing a higher level control plane mechanism that would provide metadata about a device being remotely managed in which case Libvirt would avoid trying to set or clear a VLAN ID. This would be more complicated since other software (like Nova in the OpenStack case) would have to annotate every guest device with an attribute indicating whether a device is remotely managed or not based on operator provided configuration so that Libvirt can act on this and avoid VLAN programming. https://gitlab.com/dmitriis/libvirt/-/pipelines/406528913 [1] https://docs.mellanox.com/display/BlueFieldSWv35111601/Modes+of+Operation... [2] https://github.com/torvalds/linux/blob/v5.15/drivers/net/ethernet/mellano... Dmitrii Shcherbakov (1): Ignore EPERM on attempts to clear VF VLAN ID src/libvirt_private.syms | 7 ++ src/util/virnetdev.c | 199 ++++++++++++++++++++++------------- src/util/virnetdevpriv.h | 44 ++++++++ tests/virnetdevtest.c | 222 ++++++++++++++++++++++++++++++++++++++- 4 files changed, 396 insertions(+), 76 deletions(-) create mode 100644 src/util/virnetdevpriv.h -- 2.32.0