[RFC v2 PATCH 3/4] Enable vlan support for standard linux bridges
Adjust domain and network validation to permit standard linux bridges
to allow vlan configuration.
Update calls to virNetDevBridgeAddPort to pass the vlan configuration.
Signed-off-by: Leigh Brown <leigh(a)solinno.co.uk>
---
src/conf/domain_validate.c | 3 ++-
src/lxc/lxc_process.c | 3 ++-
src/network/bridge_driver.c | 13 ++++++++-----
src/util/virnetdevtap.c | 2 +-
4 files changed, 13 insertions(+), 8 deletions(-)
diff --git a/src/conf/domain_validate.c b/src/conf/domain_validate.c
index 1034bb57f5..c7a79a0277 100644
--- a/src/conf/domain_validate.c
+++ b/src/conf/domain_validate.c
@@ -2077,7 +2077,8 @@ virDomainActualNetDefValidate(const virDomainNetDef *net)
(actualType == VIR_DOMAIN_NET_TYPE_DIRECT &&
virDomainNetGetActualDirectMode(net) == VIR_NETDEV_MACVLAN_MODE_PASSTHRU)
||
(actualType == VIR_DOMAIN_NET_TYPE_BRIDGE &&
- vport && vport->virtPortType ==
VIR_NETDEV_VPORT_PROFILE_OPENVSWITCH))) {
+ vport && vport->virtPortType ==
VIR_NETDEV_VPORT_PROFILE_OPENVSWITCH) ||
+ (actualType == VIR_DOMAIN_NET_TYPE_BRIDGE && !vport))) {
virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
_("interface %1$s - vlan tag not supported for this
connection type"),
macstr);
diff --git a/src/lxc/lxc_process.c b/src/lxc/lxc_process.c
index 2a91896328..7c8dc703ca 100644
--- a/src/lxc/lxc_process.c
+++ b/src/lxc/lxc_process.c
@@ -290,7 +290,8 @@ virLXCProcessSetupInterfaceTap(virDomainDef *vm,
vport, virDomainNetGetActualVlan(net)) <
0)
return NULL;
} else {
- if (virNetDevBridgeAddPort(brname, parentVeth, NULL) < 0)
+ if (virNetDevBridgeAddPort(brname, parentVeth,
+ virDomainNetGetActualVlan(net)) < 0)
return NULL;
if (virDomainNetGetActualPortOptionsIsolated(net) == VIR_TRISTATE_BOOL_YES
&&
diff --git a/src/network/bridge_driver.c b/src/network/bridge_driver.c
index e700a614a9..7ce943aabc 100644
--- a/src/network/bridge_driver.c
+++ b/src/network/bridge_driver.c
@@ -2997,7 +2997,8 @@ networkValidate(virNetworkDriverState *driver,
/* The only type of networks that currently support transparent
* vlan configuration are those using hostdev sr-iov devices from
- * a pool, and those using an Open vSwitch bridge.
+ * a pool, those using an Open vSwitch bridge, and standard linux
+ * bridges.
*/
vlanAllowed = (def->forward.type == VIR_NETWORK_FORWARD_HOSTDEV ||
@@ -3005,15 +3006,17 @@ networkValidate(virNetworkDriverState *driver,
(def->forward.type == VIR_NETWORK_FORWARD_BRIDGE &&
def->virtPortProfile &&
def->virtPortProfile->virtPortType
- == VIR_NETDEV_VPORT_PROFILE_OPENVSWITCH));
+ == VIR_NETDEV_VPORT_PROFILE_OPENVSWITCH) ||
+ (def->forward.type == VIR_NETWORK_FORWARD_BRIDGE &&
+ !def->virtPortProfile));
vlanUsed = def->vlan.nTags > 0;
for (i = 0; i < def->nPortGroups; i++) {
if (vlanUsed || def->portGroups[i].vlan.nTags > 0) {
/* anyone using this portgroup will get a vlan tag. Verify
- * that they will also be using an openvswitch connection,
- * as that is the only type of network that currently
- * supports a vlan tag.
+ * that they will also be using an openvswitch connection
+ * or a standard linux bridge as they are the only types of
+ * network that currently support a vlan tag.
*/
if (def->portGroups[i].virtPortProfile) {
if (def->forward.type != VIR_NETWORK_FORWARD_BRIDGE ||
diff --git a/src/util/virnetdevtap.c b/src/util/virnetdevtap.c
index a9573eb8e1..1dc77f0f5c 100644
--- a/src/util/virnetdevtap.c
+++ b/src/util/virnetdevtap.c
@@ -483,7 +483,7 @@ virNetDevTapAttachBridge(const char *tapname,
return -1;
}
} else {
- if (virNetDevBridgeAddPort(brname, tapname, NULL) < 0)
+ if (virNetDevBridgeAddPort(brname, tapname, virtVlan) < 0)
return -1;
if (isolatedPort == VIR_TRISTATE_BOOL_YES &&
--
2.39.5