[libvirt] [PATCH 6/8] qemu: process: Drop !QEMU_CAPS_DEVICE code

Nowadays we only support qemu 0.12.0+ which provides QEMU_CAPS_DEVICE, so this is all dead code. --- src/qemu/qemu_process.c | 471 +++--------------------------------------------- 1 file changed, 27 insertions(+), 444 deletions(-) diff --git a/src/qemu/qemu_process.c b/src/qemu/qemu_process.c index f083f3f..625e74c 100644 --- a/src/qemu/qemu_process.c +++ b/src/qemu/qemu_process.c @@ -2404,31 +2404,29 @@ qemuProcessInitPasswords(virConnectPtr conn, goto cleanup; } - if (virQEMUCapsGet(priv->qemuCaps, QEMU_CAPS_DEVICE)) { - for (i = 0; i < vm->def->ndisks; i++) { - size_t secretLen; + for (i = 0; i < vm->def->ndisks; i++) { + size_t secretLen; - if (!vm->def->disks[i]->src->encryption || - !virDomainDiskGetSource(vm->def->disks[i])) - continue; + if (!vm->def->disks[i]->src->encryption || + !virDomainDiskGetSource(vm->def->disks[i])) + continue; - VIR_FREE(secret); - if (qemuProcessGetVolumeQcowPassphrase(conn, - vm->def->disks[i], - &secret, &secretLen) < 0) - goto cleanup; + VIR_FREE(secret); + if (qemuProcessGetVolumeQcowPassphrase(conn, + vm->def->disks[i], + &secret, &secretLen) < 0) + goto cleanup; - VIR_FREE(alias); - if (VIR_STRDUP(alias, vm->def->disks[i]->info.alias) < 0) - goto cleanup; - if (qemuDomainObjEnterMonitorAsync(driver, vm, asyncJob) < 0) - goto cleanup; - ret = qemuMonitorSetDrivePassphrase(priv->mon, alias, secret); - if (qemuDomainObjExitMonitor(driver, vm) < 0) - ret = -1; - if (ret < 0) - goto cleanup; - } + VIR_FREE(alias); + if (VIR_STRDUP(alias, vm->def->disks[i]->info.alias) < 0) + goto cleanup; + if (qemuDomainObjEnterMonitorAsync(driver, vm, asyncJob) < 0) + goto cleanup; + ret = qemuMonitorSetDrivePassphrase(priv->mon, alias, secret); + if (qemuDomainObjExitMonitor(driver, vm) < 0) + ret = -1; + if (ret < 0) + goto cleanup; } cleanup: @@ -2439,400 +2437,6 @@ qemuProcessInitPasswords(virConnectPtr conn, } -#define QEMU_PCI_VENDOR_INTEL 0x8086 -#define QEMU_PCI_VENDOR_LSI_LOGIC 0x1000 -#define QEMU_PCI_VENDOR_REDHAT 0x1af4 -#define QEMU_PCI_VENDOR_CIRRUS 0x1013 -#define QEMU_PCI_VENDOR_REALTEK 0x10ec -#define QEMU_PCI_VENDOR_AMD 0x1022 -#define QEMU_PCI_VENDOR_ENSONIQ 0x1274 -#define QEMU_PCI_VENDOR_VMWARE 0x15ad -#define QEMU_PCI_VENDOR_QEMU 0x1234 - -#define QEMU_PCI_PRODUCT_DISK_VIRTIO 0x1001 - -#define QEMU_PCI_PRODUCT_BALLOON_VIRTIO 0x1002 - -#define QEMU_PCI_PRODUCT_NIC_NE2K 0x8029 -#define QEMU_PCI_PRODUCT_NIC_PCNET 0x2000 -#define QEMU_PCI_PRODUCT_NIC_RTL8139 0x8139 -#define QEMU_PCI_PRODUCT_NIC_E1000 0x100E -#define QEMU_PCI_PRODUCT_NIC_VIRTIO 0x1000 - -#define QEMU_PCI_PRODUCT_VGA_CIRRUS 0x00b8 -#define QEMU_PCI_PRODUCT_VGA_VMWARE 0x0405 -#define QEMU_PCI_PRODUCT_VGA_STDVGA 0x1111 - -#define QEMU_PCI_PRODUCT_AUDIO_AC97 0x2415 -#define QEMU_PCI_PRODUCT_AUDIO_ES1370 0x5000 - -#define QEMU_PCI_PRODUCT_CONTROLLER_PIIX 0x7010 -#define QEMU_PCI_PRODUCT_CONTROLLER_LSI 0x0012 - -#define QEMU_PCI_PRODUCT_WATCHDOG_I63000ESB 0x25ab - -static int -qemuProcessAssignNextPCIAddress(virDomainDeviceInfo *info, - int vendor, - int product, - qemuMonitorPCIAddress *addrs, - int naddrs) -{ - bool found = false; - size_t i; - - VIR_DEBUG("Look for %x:%x out of %d", vendor, product, naddrs); - - for (i = 0; i < naddrs; i++) { - VIR_DEBUG("Maybe %x:%x", addrs[i].vendor, addrs[i].product); - if (addrs[i].vendor == vendor && - addrs[i].product == product) { - VIR_DEBUG("Match %zu", i); - found = true; - break; - } - } - if (!found) - return -1; - - /* Blank it out so this device isn't matched again */ - addrs[i].vendor = 0; - addrs[i].product = 0; - - if (info->type == VIR_DOMAIN_DEVICE_ADDRESS_TYPE_NONE) - info->type = VIR_DOMAIN_DEVICE_ADDRESS_TYPE_PCI; - - if (info->type == VIR_DOMAIN_DEVICE_ADDRESS_TYPE_PCI) { - info->addr.pci.domain = addrs[i].addr.domain; - info->addr.pci.bus = addrs[i].addr.bus; - info->addr.pci.slot = addrs[i].addr.slot; - info->addr.pci.function = addrs[i].addr.function; - } - - return 0; -} - -static int -qemuProcessGetPCIDiskVendorProduct(virDomainDiskDefPtr def, - unsigned *vendor, - unsigned *product) -{ - switch (def->bus) { - case VIR_DOMAIN_DISK_BUS_VIRTIO: - *vendor = QEMU_PCI_VENDOR_REDHAT; - *product = QEMU_PCI_PRODUCT_DISK_VIRTIO; - break; - - default: - return -1; - } - - return 0; -} - -static int -qemuProcessGetPCINetVendorProduct(virDomainNetDefPtr def, - unsigned *vendor, - unsigned *product) -{ - if (!def->model) - return -1; - - if (STREQ(def->model, "ne2k_pci")) { - *vendor = QEMU_PCI_VENDOR_REALTEK; - *product = QEMU_PCI_PRODUCT_NIC_NE2K; - } else if (STREQ(def->model, "pcnet")) { - *vendor = QEMU_PCI_VENDOR_AMD; - *product = QEMU_PCI_PRODUCT_NIC_PCNET; - } else if (STREQ(def->model, "rtl8139")) { - *vendor = QEMU_PCI_VENDOR_REALTEK; - *product = QEMU_PCI_PRODUCT_NIC_RTL8139; - } else if (STREQ(def->model, "e1000")) { - *vendor = QEMU_PCI_VENDOR_INTEL; - *product = QEMU_PCI_PRODUCT_NIC_E1000; - } else if (STREQ(def->model, "virtio")) { - *vendor = QEMU_PCI_VENDOR_REDHAT; - *product = QEMU_PCI_PRODUCT_NIC_VIRTIO; - } else { - VIR_INFO("Unexpected NIC model %s, cannot get PCI address", - def->model); - return -1; - } - return 0; -} - -static int -qemuProcessGetPCIControllerVendorProduct(virDomainControllerDefPtr def, - unsigned *vendor, - unsigned *product) -{ - switch (def->type) { - case VIR_DOMAIN_CONTROLLER_TYPE_SCSI: - *vendor = QEMU_PCI_VENDOR_LSI_LOGIC; - *product = QEMU_PCI_PRODUCT_CONTROLLER_LSI; - break; - - case VIR_DOMAIN_CONTROLLER_TYPE_FDC: - /* XXX we could put in the ISA bridge address, but - that's not technically the FDC's address */ - return -1; - - case VIR_DOMAIN_CONTROLLER_TYPE_IDE: - *vendor = QEMU_PCI_VENDOR_INTEL; - *product = QEMU_PCI_PRODUCT_CONTROLLER_PIIX; - break; - - default: - VIR_INFO("Unexpected controller type %s, cannot get PCI address", - virDomainControllerTypeToString(def->type)); - return -1; - } - - return 0; -} - -static int -qemuProcessGetPCIVideoVendorProduct(virDomainVideoDefPtr def, - unsigned *vendor, - unsigned *product) -{ - switch (def->type) { - case VIR_DOMAIN_VIDEO_TYPE_CIRRUS: - *vendor = QEMU_PCI_VENDOR_CIRRUS; - *product = QEMU_PCI_PRODUCT_VGA_CIRRUS; - break; - - case VIR_DOMAIN_VIDEO_TYPE_VGA: - *vendor = QEMU_PCI_VENDOR_QEMU; - *product = QEMU_PCI_PRODUCT_VGA_STDVGA; - break; - - case VIR_DOMAIN_VIDEO_TYPE_VMVGA: - *vendor = QEMU_PCI_VENDOR_VMWARE; - *product = QEMU_PCI_PRODUCT_VGA_VMWARE; - break; - - default: - return -1; - } - return 0; -} - -static int -qemuProcessGetPCISoundVendorProduct(virDomainSoundDefPtr def, - unsigned *vendor, - unsigned *product) -{ - switch (def->model) { - case VIR_DOMAIN_SOUND_MODEL_ES1370: - *vendor = QEMU_PCI_VENDOR_ENSONIQ; - *product = QEMU_PCI_PRODUCT_AUDIO_ES1370; - break; - - case VIR_DOMAIN_SOUND_MODEL_AC97: - *vendor = QEMU_PCI_VENDOR_INTEL; - *product = QEMU_PCI_PRODUCT_AUDIO_AC97; - break; - - default: - return -1; - } - - return 0; -} - -static int -qemuProcessGetPCIWatchdogVendorProduct(virDomainWatchdogDefPtr def, - unsigned *vendor, - unsigned *product) -{ - switch (def->model) { - case VIR_DOMAIN_WATCHDOG_MODEL_I6300ESB: - *vendor = QEMU_PCI_VENDOR_INTEL; - *product = QEMU_PCI_PRODUCT_WATCHDOG_I63000ESB; - break; - - default: - return -1; - } - - return 0; -} - - -static int -qemuProcessGetPCIMemballoonVendorProduct(virDomainMemballoonDefPtr def, - unsigned *vendor, - unsigned *product) -{ - switch (def->model) { - case VIR_DOMAIN_MEMBALLOON_MODEL_VIRTIO: - *vendor = QEMU_PCI_VENDOR_REDHAT; - *product = QEMU_PCI_PRODUCT_BALLOON_VIRTIO; - break; - - default: - return -1; - } - - return 0; -} - - -/* - * This entire method assumes that PCI devices in 'info pci' - * match ordering of devices specified on the command line - * wrt to devices of matching vendor+product - * - * XXXX this might not be a valid assumption if we assign - * some static addrs on CLI. Have to check that... - */ -static int -qemuProcessDetectPCIAddresses(virDomainObjPtr vm, - qemuMonitorPCIAddress *addrs, - int naddrs) -{ - unsigned int vendor = 0, product = 0; - size_t i; - - /* XXX should all these vendor/product IDs be kept in the - * actual device data structure instead ? - */ - - for (i = 0; i < vm->def->ndisks; i++) { - if (qemuProcessGetPCIDiskVendorProduct(vm->def->disks[i], &vendor, &product) < 0) - continue; - - if (qemuProcessAssignNextPCIAddress(&(vm->def->disks[i]->info), - vendor, product, - addrs, naddrs) < 0) { - virReportError(VIR_ERR_INTERNAL_ERROR, - _("cannot find PCI address for VirtIO disk %s"), - vm->def->disks[i]->dst); - return -1; - } - } - - for (i = 0; i < vm->def->nnets; i++) { - if (qemuProcessGetPCINetVendorProduct(vm->def->nets[i], &vendor, &product) < 0) - continue; - - if (qemuProcessAssignNextPCIAddress(&(vm->def->nets[i]->info), - vendor, product, - addrs, naddrs) < 0) { - virReportError(VIR_ERR_INTERNAL_ERROR, - _("cannot find PCI address for %s NIC"), - vm->def->nets[i]->model); - return -1; - } - } - - for (i = 0; i < vm->def->ncontrollers; i++) { - if (qemuProcessGetPCIControllerVendorProduct(vm->def->controllers[i], &vendor, &product) < 0) - continue; - - if (qemuProcessAssignNextPCIAddress(&(vm->def->controllers[i]->info), - vendor, product, - addrs, naddrs) < 0) { - virReportError(VIR_ERR_INTERNAL_ERROR, - _("cannot find PCI address for controller %s"), - virDomainControllerTypeToString(vm->def->controllers[i]->type)); - return -1; - } - } - - for (i = 0; i < vm->def->nvideos; i++) { - if (qemuProcessGetPCIVideoVendorProduct(vm->def->videos[i], &vendor, &product) < 0) - continue; - - if (qemuProcessAssignNextPCIAddress(&(vm->def->videos[i]->info), - vendor, product, - addrs, naddrs) < 0) { - virReportError(VIR_ERR_INTERNAL_ERROR, - _("cannot find PCI address for video adapter %s"), - virDomainVideoTypeToString(vm->def->videos[i]->type)); - return -1; - } - } - - for (i = 0; i < vm->def->nsounds; i++) { - if (qemuProcessGetPCISoundVendorProduct(vm->def->sounds[i], &vendor, &product) < 0) - continue; - - if (qemuProcessAssignNextPCIAddress(&(vm->def->sounds[i]->info), - vendor, product, - addrs, naddrs) < 0) { - virReportError(VIR_ERR_INTERNAL_ERROR, - _("cannot find PCI address for sound adapter %s"), - virDomainSoundModelTypeToString(vm->def->sounds[i]->model)); - return -1; - } - } - - - if (vm->def->watchdog && - qemuProcessGetPCIWatchdogVendorProduct(vm->def->watchdog, &vendor, &product) == 0) { - if (qemuProcessAssignNextPCIAddress(&(vm->def->watchdog->info), - vendor, product, - addrs, naddrs) < 0) { - virReportError(VIR_ERR_INTERNAL_ERROR, - _("cannot find PCI address for watchdog %s"), - virDomainWatchdogModelTypeToString(vm->def->watchdog->model)); - return -1; - } - } - - if (vm->def->memballoon && - qemuProcessGetPCIMemballoonVendorProduct(vm->def->memballoon, &vendor, &product) == 0) { - if (qemuProcessAssignNextPCIAddress(&(vm->def->memballoon->info), - vendor, product, - addrs, naddrs) < 0) { - virReportError(VIR_ERR_INTERNAL_ERROR, - _("cannot find PCI address for balloon %s"), - virDomainMemballoonModelTypeToString(vm->def->memballoon->model)); - return -1; - } - } - - /* XXX console (virtio) */ - - - /* ... and now things we don't have in our xml */ - - /* XXX USB controller ? */ - - /* XXX what about other PCI devices (ie bridges) */ - - return 0; -} - -static int -qemuProcessInitPCIAddresses(virQEMUDriverPtr driver, - virDomainObjPtr vm, - int asyncJob) -{ - qemuDomainObjPrivatePtr priv = vm->privateData; - int naddrs; - int ret = -1; - qemuMonitorPCIAddress *addrs = NULL; - - if (qemuDomainObjEnterMonitorAsync(driver, vm, asyncJob) < 0) - return -1; - naddrs = qemuMonitorGetAllPCIAddresses(priv->mon, - &addrs); - if (qemuDomainObjExitMonitor(driver, vm) < 0) - goto cleanup; - - if (naddrs > 0) - ret = qemuProcessDetectPCIAddresses(vm, addrs, naddrs); - - cleanup: - VIR_FREE(addrs); - - return ret; -} - - static int qemuProcessPrepareChardevDevice(virDomainDefPtr def ATTRIBUTE_UNUSED, virDomainChrDefPtr dev, @@ -3600,9 +3204,8 @@ qemuProcessReconnect(void *opaque) goto cleanup; } - if (virQEMUCapsGet(priv->qemuCaps, QEMU_CAPS_DEVICE)) - if ((qemuDomainAssignAddresses(obj->def, priv->qemuCaps, obj)) < 0) - goto error; + if ((qemuDomainAssignAddresses(obj->def, priv->qemuCaps, obj)) < 0) + goto error; /* if domain requests security driver we haven't loaded, report error, but * do not kill the domain @@ -4750,11 +4353,9 @@ qemuProcessLaunch(virConnectPtr conn, * we also need to populate the PCI address set cache for later * use in hotplug */ - if (virQEMUCapsGet(priv->qemuCaps, QEMU_CAPS_DEVICE)) { - VIR_DEBUG("Assigning domain PCI addresses"); - if ((qemuDomainAssignAddresses(vm->def, priv->qemuCaps, vm)) < 0) - goto cleanup; - } + VIR_DEBUG("Assigning domain PCI addresses"); + if ((qemuDomainAssignAddresses(vm->def, priv->qemuCaps, vm)) < 0) + goto cleanup; VIR_DEBUG("Checking for any possible (non-fatal) issues"); @@ -5006,14 +4607,6 @@ qemuProcessLaunch(virConnectPtr conn, if (qemuProcessInitPasswords(conn, driver, vm, asyncJob) < 0) goto cleanup; - /* If we have -device, then addresses are assigned explicitly. - * If not, then we have to detect dynamic ones here */ - if (!virQEMUCapsGet(priv->qemuCaps, QEMU_CAPS_DEVICE)) { - VIR_DEBUG("Determining domain device PCI addresses"); - if (qemuProcessInitPCIAddresses(driver, vm, asyncJob) < 0) - goto cleanup; - } - /* set default link states */ /* qemu doesn't support setting this on the command line, so * enter the monitor */ @@ -5652,11 +5245,9 @@ int qemuProcessAttach(virConnectPtr conn ATTRIBUTE_UNUSED, * we also need to populate the PCI address set cache for later * use in hotplug */ - if (virQEMUCapsGet(priv->qemuCaps, QEMU_CAPS_DEVICE)) { - VIR_DEBUG("Assigning domain PCI addresses"); - if ((qemuDomainAssignAddresses(vm->def, priv->qemuCaps, vm)) < 0) + VIR_DEBUG("Assigning domain PCI addresses"); + if ((qemuDomainAssignAddresses(vm->def, priv->qemuCaps, vm)) < 0) goto error; - } if ((timestamp = virTimeStringNow()) == NULL) goto error; @@ -5689,14 +5280,6 @@ int qemuProcessAttach(virConnectPtr conn ATTRIBUTE_UNUSED, if (qemuProcessDetectIOThreadPIDs(driver, vm, QEMU_ASYNC_JOB_NONE) < 0) goto error; - /* If we have -device, then addresses are assigned explicitly. - * If not, then we have to detect dynamic ones here */ - if (!virQEMUCapsGet(priv->qemuCaps, QEMU_CAPS_DEVICE)) { - VIR_DEBUG("Determining domain device PCI addresses"); - if (qemuProcessInitPCIAddresses(driver, vm, QEMU_ASYNC_JOB_NONE) < 0) - goto error; - } - VIR_DEBUG("Getting initial memory amount"); qemuDomainObjEnterMonitor(driver, vm); if (qemuMonitorGetBalloonInfo(priv->mon, &vm->def->mem.cur_balloon) < 0) -- 2.5.0