On 6/8/20 5:19 PM, Laine Stump wrote:
On 6/8/20 2:39 PM, Daniel Henrique Barboza wrote:
>
>
> On 6/5/20 2:56 PM, Laine Stump wrote:
>> Juan Quintela noticed that when he restarted libvirt he was getting
>> extra iptables rules added by libvirt even though he didn't have any
>> libvirt networks that used iptables rules. It turns out this also
>> happens if the firewalld service is restarted. The extra rules are
>> just the private chains, and they're sometimes being added
>> unnecessarily because they are added separately in a global
>> networkPreReloadFirewallRules() that does the init if there are any
>> active networks, regardless of whether or not any of those networks
>> will actually add rules to the host firewall.
>>
>> The fix is to change the check for "any active networks" to instead
>> check for "any active networks that add firewall rules".
>>
>> (NB: although the timing seems suspicious, this isn't a new regression
>> caused by the recently pushed f5418b427 (which forces recreation of
>> private chains when firewalld is restarted); it was an existing bug
>> since iptables rules were first put into private chains, even after
>> commit c6cbe18771 delayed creation of the private chains. The
>> implication is that any downstream based on v5.1.0 or later that cares
>> about these extraneous (but harmless) private chains would want to
>> backport this patch (along with the other two if they aren't already
>> there))
>>
>> Signed-off-by: Laine Stump <laine(a)redhat.com>
>> ---
>> src/network/bridge_driver_linux.c | 49 ++++++++++++++++++++++++-------
>> 1 file changed, 38 insertions(+), 11 deletions(-)
>>
>> diff --git a/src/network/bridge_driver_linux.c
b/src/network/bridge_driver_linux.c
>> index b0bd207250..4145411b4b 100644
>> --- a/src/network/bridge_driver_linux.c
>> +++ b/src/network/bridge_driver_linux.c
>> @@ -91,28 +91,55 @@ static void networkSetupPrivateChains(void)
>> static int
>> -networkHasRunningNetworksHelper(virNetworkObjPtr obj,
>> +networkHasRunningNetworksWithFWHelper(virNetworkObjPtr obj,
>> void *opaque)
>> {
>> - bool *running = opaque;
>> + bool *activeWithFW = opaque;
>> virObjectLock(obj);
>> - if (virNetworkObjIsActive(obj))
>> - *running = true;
>> + if (virNetworkObjIsActive(obj)) {
>> + virNetworkDefPtr def = virNetworkObjGetDef(obj);
>> +
>> + switch ((virNetworkForwardType) def->forward.type) {
>> + case VIR_NETWORK_FORWARD_NONE:
>> + case VIR_NETWORK_FORWARD_NAT:
>> + case VIR_NETWORK_FORWARD_ROUTE:
>> + *activeWithFW = true;
>> + break;
>> +
>
>
> What's the rationale of "VIR_NETWORK_FORWARD_NONE" changing firewall
rules? Is
> this a corner case that the NONE type covers? Functions such as
> networkAddIPSpecificFirewallRules() are operating just with the NAT and ROUTE
> forward types.
For historical reasons, a libvirt network that has no <forward> element is an
"isolated" network, and libvirt adds rules to prevent any traffic from guests
connected to that network from being forwarded anywhere else. These include 1) rules to
allow incoming dhcp and dns requests (and possibly tftp) from guests on the network to the
host, 2) allow traffic between guests on the isolated bridge (this rule would only be
necessary in the case that the br_netfilter kernel module is loaded and there was some
other lower priority rule that would otherwise block this traffic), and 3) reject
forwarding of all packets to/from guests connected to this network and anywhere else
outside the network (including a endpoints connected to a different network on the same
host). Details are in
https://libvirt.org/firewall.html
Thanks for the explanation!
>
> (side note: there is no "firewall" string in formatdomain.html.in docs. I
think
> it's a good idea to mention that certain <forward> types will change
firewall
> settings of the host)
Sure. With maybe a pointer from there to firewall.html, which explains this all in
excruciating detail. Patches welcome :-)
Patch sent :)