8:52 a.m.
My results are a bit inconclusive. I have a machine here which
supposedly supports NUMA (2 socket, 2 core AMD with hypertransport and
two separate banks of RAM).
BIOS is _not_ configured to interleave memory. Other BIOS settings lead
me to suppose that NUMA is enabled (or at least not disabled).
Booting with Daniel's Xen & kernel does not give any messages about NUMA
enabled or disabled. (See attached messages).
# numactl --show
physcpubind: 0 1 2 3
No NUMA support available on this system.
$ grep -i numa /boot/config-2.6.18-numa.52.el5xen
[ no configuration lines shown ]
Nevertheless, with Beth's patch I see:
# src/virsh freecell 0
0: 133292032 kB
# src/virsh freecell 1
libvir: Xen error : invalid argument in
xenHypervisorNodeGetCellsFreeMemory: invalid argument
# src/virsh freecell
Total: 133292032 kB
# src/virsh freecell -2
-2: 0 kB
(Negative numbers should be returning an error).
# src/virsh capabilities
[...]
<topology>
<cells num='1'>
<cell id='0'>
<cpus num='4'>
<cpu id='0'/>
<cpu id='1'/>
<cpu id='2'/>
<cpu id='3'/>
</cpus>
</cell>
</cells>
</topology>
[...]
Rich.
--
Emerging Technologies, Red Hat - http://et.redhat.com/~rjones/
Registered Address: Red Hat UK Ltd, Amberley Place, 107-111 Peascod
Street, Windsor, Berkshire, SL4 1TE, United Kingdom. Registered in
England and Wales under Company Registration No. 03798903
__ __
\ \/ /___ _ __
\ // _ \ \047_ \
/ \ __/ | | |
/_/\_\___|_| |_|
_____ _ ___ ____ ____ _ ____
|___ / / | / _ \ _ __ _ _ _ __ ___ __ _ | ___|___ \ ___| | ___|
|_ \ | || | | |__| \047_ \| | | | \047_ ` _ \ / _` | |___ \ __) | / _ \ |___ \
___) || || |_| |__| | | | |_| | | | | | | (_| |_ ___) / __/ | __/ |___) |
|____(_)_(_)___/ |_| |_|\__,_|_| |_| |_|\__,_(_)____/_____(_)___|_|____/
http://www.cl.cam.ac.uk/netos/xen
University of Cambridge Computer Laboratory
Xen version 3.1.0-numa.52.el5 (veillard@) (gcc version 4.1.2 20070626 (Red Hat 4.1.2-14))
Thu Sep 27 14:51:13 CEST 2007
Latest ChangeSet: unavailable
(XEN) Command line: (hd0,5)/xen.gz-2.6.18-numa.52.el5 noreboot
(XEN) 0000000000000000 - 000000000009a000 (usable)
(XEN) 000000000009ac00 - 00000000000a0000 (reserved)
(XEN) 00000000000d2000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 00000000adf00000 (usable)
(XEN) 00000000adf00000 - 00000000adf0d000 (ACPI data)
(XEN) 00000000adf0d000 - 00000000adf80000 (ACPI NVS)
(XEN) 00000000adf80000 - 00000000ae000000 (reserved)
(XEN) 00000000e0000000 - 00000000f0000000 (reserved)
(XEN) 00000000fec00000 - 00000000fec10000 (reserved)
(XEN) 00000000fee00000 - 00000000fee01000 (reserved)
(XEN) 00000000fff00000 - 0000000100000000 (reserved)
(XEN) 0000000100000000 - 0000000152000000 (usable)
(XEN) System RAM: 4094MB (4192872kB)
(XEN) Xen heap: 13MB (14104kB)
(XEN) Domain heap initialised: DMA width 32 bits
(XEN) Processor #0 15:1 APIC version 16
(XEN) Processor #1 15:1 APIC version 16
(XEN) Processor #2 15:1 APIC version 16
(XEN) Processor #3 15:1 APIC version 16
(XEN) IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
(XEN) IOAPIC[1]: apic_id 5, version 17, address 0xd0000000, GSI 24-47
(XEN) Enabling APIC mode: Flat. Using 2 I/O APICs
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 2814.461 MHz processor.
(XEN) AMD SVM: ASIDs disabled.
(XEN) HVM: SVM enabled
(XEN) CPU0: AMD Dual-Core AMD Opteron(tm) Processor 2220 stepping 03
(XEN) Mapping cpu 0 to node 255
(XEN) Booting processor 1/1 eip 90000
(XEN) Mapping cpu 1 to node 255
(XEN) AMD: Disabling C1 Clock Ramping Node #0
(XEN) AMD: Disabling C1 Clock Ramping Node #1
(XEN) AMD SVM: ASIDs disabled.
(XEN) CPU1: AMD Dual-Core AMD Opteron(tm) Processor 2220 stepping 03
(XEN) Booting processor 2/2 eip 90000
(XEN) Mapping cpu 2 to node 255
(XEN) AMD SVM: ASIDs disabled.
(XEN) CPU2: AMD Dual-Core AMD Opteron(tm) Processor 2220 stepping 03
(XEN) Booting processor 3/3 eip 90000
(XEN) Mapping cpu 3 to node 255
(XEN) AMD SVM: ASIDs disabled.
(XEN) CPU3: AMD Dual-Core AMD Opteron(tm) Processor 2220 stepping 03
(XEN) Total of 4 processors activated.
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using new ACK method
(XEN) Platform timer is 25.000MHz HPET
(XEN) Brought up 4 CPUs
(XEN) *** LOADING DOMAIN 0 ***
(XEN) elf_parse_binary: phdr: paddr=0xffffffff80200000 memsz=0x2c3c58
(XEN) elf_parse_binary: phdr: paddr=0xffffffff804c3c80 memsz=0x113270
(XEN) elf_parse_binary: phdr: paddr=0xffffffff805d7000 memsz=0xc08
(XEN) elf_parse_binary: phdr: paddr=0xffffffff805d8000 memsz=0x10af04
(XEN) elf_parse_binary: memory: 0xffffffff80200000 -> 0xffffffff806e2f04
(XEN) elf_xen_parse_note: GUEST_OS = "linux"
(XEN) elf_xen_parse_note: GUEST_VERSION = "2.6"
(XEN) elf_xen_parse_note: XEN_VERSION = "xen-3.0"
(XEN) elf_xen_parse_note: VIRT_BASE = 0xffffffff80000000
(XEN) elf_xen_parse_note: PADDR_OFFSET = 0xffffffff80000000
(XEN) elf_xen_parse_note: ENTRY = 0xffffffff80200000
(XEN) elf_xen_parse_note: HYPERCALL_PAGE = 0xffffffff80206000
(XEN) elf_xen_parse_note: FEATURES =
"writable_page_tables|writable_descriptor_tables|auto_translated_physmap|pae_pgdir_above_4gb|supervisor_mode_kernel"
(XEN) elf_xen_parse_note: LOADER = "generic"
(XEN) elf_xen_addr_calc_check: addresses:
(XEN) virt_base = 0xffffffff80000000
(XEN) elf_paddr_offset = 0xffffffff80000000
(XEN) virt_offset = 0x0
(XEN) virt_kstart = 0xffffffff80200000
(XEN) virt_kend = 0xffffffff806e2f04
(XEN) virt_entry = 0xffffffff80200000
(XEN) Xen kernel: 64-bit, lsb, compat32
(XEN) Dom0 kernel: 64-bit, lsb, paddr 0xffffffff80200000 -> 0xffffffff806e2f04
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 000000014a000000->000000014c000000 (985118 pages to be
allocated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: ffffffff80200000->ffffffff806e2f04
(XEN) Init. ramdisk: ffffffff806e3000->ffffffff80e38000
(XEN) Phys-Mach map: ffffffff80e38000->ffffffff815cc0f0
(XEN) Start info: ffffffff815cd000->ffffffff815cd49c
(XEN) Page tables: ffffffff815ce000->ffffffff815dd000
(XEN) Boot stack: ffffffff815dd000->ffffffff815de000
(XEN) TOTAL: ffffffff80000000->ffffffff81800000
(XEN) ENTRY ADDRESS: ffffffff80200000
(XEN) Dom0 has maximum 4 VCPUs
(XEN) elf_load_binary: phdr 0 at 0xffffffff80200000 -> 0xffffffff804c3c58
(XEN) elf_load_binary: phdr 1 at 0xffffffff804c3c80 -> 0xffffffff805d6ef0
(XEN) elf_load_binary: phdr 2 at 0xffffffff805d7000 -> 0xffffffff805d7c08
(XEN) elf_load_binary: phdr 3 at 0xffffffff805d8000 -> 0xffffffff80611388
(XEN) Initrd len 0x755000, start at 0xffffffff806e3000
(XEN) Scrubbing Free RAM: .done.
(XEN) Xen trace buffers: disabled
(XEN) Std. Loglevel: Errors and warnings
(XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings)
(XEN) Xen is relinquishing VGA console.
(XEN) *** Serial input -> DOM0 (type \047CTRL-a\047 three times to switch input to
Xen).
(XEN) traps.c:1698:d0 Domain attempted WRMSR 0000000000000410 from 00000000:00000000 to
00000000:00043bff.
(XEN) traps.c:1698:d0 Domain attempted WRMSR 0000000000000410 from 00000000:00000000 to
00000000:00043bff.
(XEN) traps.c:1698:d0 Domain attempted WRMSR 0000000000000410 from 00000000:00000000 to
00000000:00043bff.
(XEN) traps.c:1698:d0 Domain attempted WRMSR 0000000000000410 from 00000000:00000000 to
00000000:00043bff.
Bootdata ok (command line is root=/dev/OS/RHEL5 ro)
Linux version 2.6.18-numa.52.el5xen (veillard@test2) (gcc version 4.1.2 20070626 (Red Hat
4.1.2-14)) #1 SMP Thu Sep 27 15:18:40 CEST 2007
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 00000000f301e000 (usable)
On node 0 totalpages: 995358
DMA zone: 995358 pages, LIFO batch:31
DMI present.
ACPI: RSDP (v000 PTLTD ) @ 0x00000000000f7b00
ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x00000000adf070e8
ACPI: FADT (v001 NVIDIA CK8S 0x06040000 PTL_ 0x000f4240) @ 0x00000000adf0cce6
ACPI: SPCR (v001 PTLTD $UCRTBL$ 0x06040000 PTL 0x00000001) @ 0x00000000adf0cd5a
ACPI: MCFG (v001 PTLTD MCFG 0x06040000 LTP 0x00000000) @ 0x00000000adf0cdaa
ACPI: HPET (v001 PTLTD HPETTBL 0x06040000 LTP 0x00000001) @ 0x00000000adf0cdf6
ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0x00000000adf0ce2e
ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x00000000adf0cec8
ACPI: SRAT (v001 AMD HAMMER 0x06040000 AMD 0x00000001) @ 0x00000000adf0cef0
ACPI: DSDT (v001 NVIDIA CK8 0x06040000 MSFT 0x0100000e) @ 0x0000000000000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x05] address[0xd0000000] gsi_base[24])
IOAPIC[1]: apic_id 5, version 17, address 0xd0000000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to xen
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at b0000000 (gap: ae000000:32000000)
Built 1 zonelists. Total pages: 995358
Kernel command line: root=/dev/OS/RHEL5 ro
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Xen reported: 2814.460 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Software IO TLB enabled:
Aperture: 64 megabytes
Kernel range: 0xffff880005c86000 - 0xffff880009c86000
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Memory: 3817216k/3981432k available (2357k kernel code, 155508k reserved, 1326k data, 172k
init)
Calibrating delay using timer specific routine.. 7037.82 BogoMIPS (lpj=14075647)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
(SMP-)alternatives turned off
ACPI: Core revision 20060707
Initializing CPU#1
Initializing CPU#2
Brought up 4 CPUs
sizeof(vma)=168 bytes
sizeof(page)=56 bytes
sizeof(inode)=560 bytes
sizeof(dentry)=216 bytes
sizeof(ext3inode)=760 bytes
sizeof(buffer_head)=96 bytes
sizeof(skbuff)=240 bytes
Initializing CPU#3
migration_cost=501
checking if image is initramfs... it is
Grant table initialized
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
PCI: Not using MMCONFIG.
PCI: Using configuration type 1
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Transparent bridge - 0000:00:06.0
Boot video device is 0000:05:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2.NECA._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 16 17 18 19 20 21 22 23) *11
ACPI: PCI Interrupt Link [LNK2] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LNK3] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LNK4] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LK1E] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LK2E] (IRQs 16 17 18 19 20 21 22 23) *11
ACPI: PCI Interrupt Link [LK3E] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LK4E] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LUS0] (IRQs 16 17 18 19 20 21 22 23) *10
ACPI: PCI Interrupt Link [LMA2] (IRQs 16 17 18 19 20 21 22 23) *10
ACPI: PCI Interrupt Link [LUS2] (IRQs 16 17 18 19 20 21 22 23) *11
ACPI: PCI Interrupt Link [LMAC] (IRQs 16 17 18 19 20 21 22 23) *11
ACPI: PCI Interrupt Link [LAZA] (IRQs 16 17 18 19 20 21 22 23) *10
ACPI: PCI Interrupt Link [LPID] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LTID] (IRQs 16 17 18 19 20 21 22 23) *7
ACPI: PCI Interrupt Link [LSI1] (IRQs 16 17 18 19 20 21 22 23) *5
ACPI: PCI Interrupt Link [LSI2] (IRQs 16 17 18 19 20 21 22 23) *10
ACPI: PCI Root Bridge [PCI1] (0000:80)
PCI: Probing PCI hardware (bus 80)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.XVR2._PRT]
ACPI: PCI Interrupt Link [LK1E] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
ACPI: PCI Interrupt Link [LK2E] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
ACPI: PCI Interrupt Link [LK3E] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
ACPI: PCI Interrupt Link [LK4E] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
ACPI: PCI Interrupt Link [LUS0] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
ACPI: PCI Interrupt Link [LMA2] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
ACPI: PCI Interrupt Link [LUS2] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
ACPI: PCI Interrupt Link [LMAC] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
ACPI: PCI Interrupt Link [LPID] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
ACPI: PCI Interrupt Link [LTID] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
ACPI: PCI Interrupt Link [LSI1] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
ACPI: PCI Interrupt Link [LSI2] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 16 devices
xen_mem: Initialising balloon driver.
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
pnp: 00:03: ioport range 0x1000-0x107f could not be reserved
pnp: 00:03: ioport range 0x1080-0x10ff has been reserved
pnp: 00:03: ioport range 0x1400-0x147f has been reserved
pnp: 00:03: ioport range 0x1480-0x14ff has been reserved
pnp: 00:03: ioport range 0x1800-0x187f has been reserved
pnp: 00:03: ioport range 0x1880-0x18ff has been reserved
pnp: 00:03: ioport range 0x3440-0x347f has been reserved
pnp: 00:03: ioport range 0x3400-0x343f has been reserved
pnp: 00:0f: ioport range 0xf000-0xf07f has been reserved
pnp: 00:0f: ioport range 0xf080-0xf0ff has been reserved
pnp: 00:0f: ioport range 0xf400-0xf47f has been reserved
pnp: 00:0f: ioport range 0xf480-0xf4ff has been reserved
pnp: 00:0f: ioport range 0xf800-0xf87f has been reserved
pnp: 00:0f: ioport range 0xf880-0xf8ff has been reserved
PCI: Bridge: 0000:00:06.0
IO window: disabled.
MEM window: b0100000-b01fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:02:00.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:02:00.1
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0d.0
IO window: disabled.
MEM window: b0200000-b02fffff
PREFETCH window: disabled.
PCI: Failed to allocate mem resource #6:20000@d0000000 for 0000:05:00.0
PCI: Bridge: 0000:00:0f.0
IO window: disabled.
MEM window: b1000000-b2ffffff
PREFETCH window: c0000000-cfffffff
PCI: Setting latency timer of device 0000:00:06.0 to 64
PCI: Setting latency timer of device 0000:00:0d.0 to 64
PCI: Setting latency timer of device 0000:02:00.0 to 64
ACPI: PCI Interrupt Link [LK4E] enabled at IRQ 23
GSI 16 sharing vector 0xA0 and IRQ 16
ACPI: PCI Interrupt 0000:02:00.1[A] -> Link [LK4E] -> GSI 23 (level, high) -> IRQ
16
PCI: Setting latency timer of device 0000:02:00.1 to 64
PCI: Setting latency timer of device 0000:00:0f.0 to 64
PCI: Bridge: 0000:80:0d.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:80:0d.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
Simple Boot Flag at 0x36 set to 0x1
audit: initializing netlink socket (disabled)
audit(1190986601.880:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 6162A2834A3D6D8
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Setting latency timer of device 0000:00:0d.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0d.0:pcie00]
PCI: Setting latency timer of device 0000:00:0f.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0f.0:pcie00]
PCI: Setting latency timer of device 0000:80:0d.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:80:0d.0:pcie00]
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
Xen virtual console successfully installed as ttyS0
Event-channel device installed.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE-MCP55: IDE controller at PCI slot 0000:00:04.0
NFORCE-MCP55: chipset revision 161
NFORCE-MCP55: not 100% native mode: will probe irqs later
NFORCE-MCP55: 0000:00:04.0 (rev a1) UDMA133 controller
ide0: BM-DMA at 0x3480-0x3487, BIOS settings: hda:DMA, hdb:pio
Probing IDE interface ide0...
hda: LITE-ON DVDRW LH-18A1P, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Write protecting the kernel read-only data: 445k
input: AT Translated Set 2 keyboard as /class/input/input0
USB Universal Host Controller Interface driver v3.0
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 22
GSI 17 sharing vector 0xA8 and IRQ 17
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUS0] -> GSI 22 (level, high) -> IRQ
17
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:02.0: irq 17, io mem 0xb0004000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 21
GSI 18 sharing vector 0xB0 and IRQ 18
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUS2] -> GSI 21 (level, high) -> IRQ
18
PCI: Setting latency timer of device 0000:00:02.1 to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:02.1: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:02.1
ehci_hcd 0000:00:02.1: irq 18, io mem 0xb0005000
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
SCSI subsystem initialized
libata version 2.21 loaded.
sata_nv 0000:00:05.0: version 3.4
ACPI: PCI Interrupt Link [LTID] enabled at IRQ 20
GSI 19 sharing vector 0xB8 and IRQ 19
ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LTID] -> GSI 20 (level, high) -> IRQ
19
PCI: Setting latency timer of device 0000:00:05.0 to 64
scsi0 : sata_nv
scsi1 : sata_nv
ata1: SATA max UDMA/133 cmd 0x00000000000134d0 ctl 0x00000000000134c6 bmdma
0x0000000000013490 irq 19
ata2: SATA max UDMA/133 cmd 0x00000000000134c8 ctl 0x00000000000134c2 bmdma
0x0000000000013498 irq 19
ohci_hcd 0000:00:02.0: wakeup
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-7: WDC WD1200JS-22MHB0, 02.01C03, max UDMA/133
ata1.00: 234441648 sectors, multi 16: LBA48
ata1.00: configured for UDMA/133
usb 1-6: new low speed USB device using ohci_hcd and address 2
usb 1-6: configuration #1 chosen from 1 choice
input: Logitech USB-PS/2 Optical Mouse as /class/input/input1
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:02.0-6
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-7: WDC WD3200YS-01PGB0, 21.00M21, max UDMA/133
ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/1)
ata2.00: configured for UDMA/133
Vendor: ATA Model: WDC WD1200JS-22M Rev: 02.0
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
sda: sda1 < sda5 sda6 sda7 sda8 > sda2 sda3
sd 0:0:0:0: Attached scsi disk sda
Vendor: ATA Model: WDC WD3200YS-01P Rev: 21.0
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: drive cache: write back
SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: drive cache: write back
sdb: sdb1
sd 1:0:0:0: Attached scsi disk sdb
ACPI: PCI Interrupt Link [LSI1] enabled at IRQ 19
GSI 20 sharing vector 0xC0 and IRQ 20
ACPI: PCI Interrupt 0000:00:05.1[B] -> Link [LSI1] -> GSI 19 (level, high) -> IRQ
20
PCI: Setting latency timer of device 0000:00:05.1 to 64
scsi2 : sata_nv
scsi3 : sata_nv
ata3: SATA max UDMA/133 cmd 0x00000000000134e8 ctl 0x00000000000134de bmdma
0x00000000000134a0 irq 20
ata4: SATA max UDMA/133 cmd 0x00000000000134e0 ctl 0x00000000000134da bmdma
0x00000000000134a8 irq 20
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ACPI: PCI Interrupt Link [LSI2] enabled at IRQ 18
GSI 21 sharing vector 0xC8 and IRQ 21
ACPI: PCI Interrupt 0000:00:05.2[C] -> Link [LSI2] -> GSI 18 (level, high) -> IRQ
21
PCI: Setting latency timer of device 0000:00:05.2 to 64
scsi4 : sata_nv
scsi5 : sata_nv
ata5: SATA max UDMA/133 cmd 0x0000000000013800 ctl 0x00000000000134f6 bmdma
0x00000000000134b0 irq 21
ata6: SATA max UDMA/133 cmd 0x00000000000134f8 ctl 0x00000000000134f2 bmdma
0x00000000000134b8 irq 21
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
device-mapper: ioctl: 4.11.0-ioctl (2006-09-14) initialised: dm-devel(a)redhat.com
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
security: 3 users, 6 roles, 1658 types, 210 bools, 1 sens, 1024 cats
security: 61 classes, 57664 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev dm-0, type ext3), uses xattr
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev cpuset, type cpuset), not configured for labeling
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
audit(1190986610.688:2): policy loaded auid=4294967295
input: PC Speaker as /class/input/input2
shpchp: HPC vendor_id 1033 device_id 125 ss_vid 0 ss_did 0
shpchp: Can't get msi for the hotplug controller
shpchp: Use INTx for the hotplug controller
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
8250_pnp: Unknown symbol serial8250_unregister_port
8250_pnp: Unknown symbol serial8250_register_port
EDAC MC: Ver: 2.0.1 Sep 27 2007
hda: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
EDAC MC0: Giving out device to k8_edac Athlon64/Opteron: DEV 0000:00:18.2
EDAC MC1: Giving out device to k8_edac Athlon64/Opteron: DEV 0000:00:19.2
i2c_adapter i2c-0: nForce2 SMBus adapter at 0x3440
i2c_adapter i2c-1: nForce2 SMBus adapter at 0x3400
i2c_adapter i2c-2: nForce2 SMBus adapter at 0x4440
i2c_adapter i2c-3: nForce2 SMBus adapter at 0x4400
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 17
GSI 22 sharing vector 0xD0 and IRQ 22
ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LMAC] -> GSI 17 (level, high) -> IRQ
22
PCI: Setting latency timer of device 0000:00:08.0 to 64
forcedeth: using HIGHDMA
device_create does not work yet for NULL parents
device_create does not work yet for NULL parents
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: Attached scsi generic sg1 type 0
eth0: forcedeth.c: subsystem: 010f1:2915 bound to 0000:00:08.0
ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 16
GSI 23 sharing vector 0xD8 and IRQ 23
ACPI: PCI Interrupt 0000:00:06.1[B] -> Link [LAZA] -> GSI 16 (level, high) -> IRQ
23
PCI: Setting latency timer of device 0000:00:06.1 to 64
hda_codec: Unknown model for ALC262, trying auto-probe from BIOS...
device_create does not work yet for NULL parents
device_create does not work yet for NULL parents
device_create does not work yet for NULL parents
device_create does not work yet for NULL parents
ACPI: PCI Interrupt Link [LMA2] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LMA2] -> GSI 23 (level, high) -> IRQ
16
PCI: Setting latency timer of device 0000:00:09.0 to 64
forcedeth: using HIGHDMA
eth1: forcedeth.c: subsystem: 010f1:2915 bound to 0000:00:09.0
lp: driver loaded but no devices found
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ibm_acpi: ec object not found
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: multipath: version 1.0.5 loaded
loop: loaded (max 8 devices)
EXT3 FS on dm-0, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev sda6, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev dm-2, type ext3), uses xattr
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev dm-5, type ext3), uses xattr
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev dm-1, type ext3), uses xattr
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev dm-6, type ext3), uses xattr
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
ip6_tables: (C) 2000-2006 Netfilter Core Team
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
ip_conntrack version 2.4 (8192 buckets, 65536 max) - 304 bytes per conntrack
process `sysctl' is using deprecated sysctl (syscall) net.ipv6.neigh.lo.retrans_time;
Use net.ipv6.neigh.lo.retrans_time_ms instead.
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
Bluetooth: Core ver 2.10
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
Bluetooth: HIDP (Human Interface Emulation) ver 1.1
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
eth0: no IPv6 routers present
Bridge firewalling registered
virbr0: no IPv6 routers present
device vif0.0 entered promiscuous mode
xenbr0: port 1(vif0.0) entering learning state
xenbr0: topology change detected, propagating
xenbr0: port 1(vif0.0) entering forwarding state
device peth0 entered promiscuous mode
xenbr0: port 2(peth0) entering learning state
xenbr0: topology change detected, propagating
xenbr0: port 2(peth0) entering forwarding state
eth0: no IPv6 routers present