Re: [libvirt] Fwd: Running the test fails virnetmessagetest with libvirt 1.2.8

hello To better define the problem I launched the test that fails virnetmessagetest with the option VIR_TEST_DEBUG = 1 and attach the result: # VIR_TEST_DEBUG=1 ./virnetmessagetest TEST: virnetmessagetest 1) Message Header Encode ... libvirt: XML-RPC error : Unable to encode message header FAILED 2) Message Header Decode ... libvirt: XML-RPC error : Unable to decode message length FAILED 3) Message Payload Encode ... libvirt: XML-RPC error : Unable to encode message header FAILED 4) Message Payload Decode ... libvirt: XML-RPC error : Unable to decode message length FAILED 5) Message Payload Stream Encode ... libvirt: XML-RPC error : Unable to encode message header FAILED Is there anyone who can give me a hand to solve the problem?

thanks Stefano ---------- Forwarded message ---------- From: Stefano Ricci <sfn.rcc(a)gmail.com&gt; Date: 2014-09-23 18:59 GMT+02:00 Subject: Running the test fails virnetmessagetest with libvirt 1.2.8 To: libvir-list(a)redhat.com Hello I apologize in advance for my English. I compiled the new version of libvirt 1.2.8 on an environment Development Linux from Scratch with the following configure: configure: Configuration summary configure: ===================== configure: configure: Drivers configure: configure: Xen: no configure: QEMU: yes configure: UML: yes configure: OpenVZ: no configure: VMware: no configure: VBox: yes configure: XenAPI: no configure: xenlight: no configure: LXC: no configure: PHYP: yes configure: ESX: no configure: Hyper-V: no configure: Parallels: no configure: Bhyve: no configure: Test: yes configure: Remote: yes configure: Network: yes configure: Libvirtd: yes configure: Interface: yes configure: macvtap: yes configure: virtport: yes configure: configure: Storage Drivers configure: configure: Dir: yes configure: FS: no configure: NetFS: no configure: LVM: yes configure: iSCSI: yes configure: SCSI: yes configure: mpath: yes configure: Disk: no configure: RBD: no configure: Sheepdog: no configure: Gluster: no configure: ZFS: no configure: configure: Security Drivers configure: configure: SELinux: yes (/sys/fs/selinux) configure: AppArmor: no (install profiles: no) configure: configure: Driver Loadable Modules configure: configure: dlopen: -ldl configure: configure: Libraries configure: configure: apparmor: no configure: attr: yes (CFLAGS='' LIBS='-lattr') configure: audit: no configure: avahi: no configure: blkid: yes (CFLAGS='-I/install/include/blkid -I/install/include/uuid ' LIBS='-L/install/lib -lblkid ') configure: capng: no configure: curl: no configure: dbus: yes (CFLAGS='-I/usr/include/dbus-1.0 -I/usr/lib/dbus-1.0/include ' LIBS='-ldbus-1 ') configure: fuse: yes (CFLAGS='-D_FILE_OFFSET_BITS=64 -I/usr/include/fuse ' LIBS='-lfuse -pthread ') configure: glusterfs: no configure: hal: no configure: netcf: no configure: numactl: no configure: openwsman: no configure: pciaccess: yes (CFLAGS='' LIBS='-lpciaccess ') configure: readline: yes (CFLAGS='' LIBS='-lreadline') configure: sanlock: no configure: sasl: yes (CFLAGS='' LIBS='-lsasl2') configure: selinux: yes (CFLAGS='' LIBS='-lselinux') configure: ssh2: yes (CFLAGS='' LIBS='-lssh2 ') configure: systemd_daemon: no configure: udev: yes (CFLAGS='' LIBS='-ludev ') configure: yajl: yes (CFLAGS='' LIBS='-lyajl') configure: libxml: -I/usr/include/libxml2 -lxml2 configure: dlopen: -ldl configure: openwsman: no configure: gnutls: -lgnutls configure: firewalld: no configure: polkit: no configure: xen: no configure: xenapi: no configure: xenlight: no configure: pcap: -I/usr/include -L/usr/lib -lpcap configure: nl: -I/usr/include/libnl3 -I/usr/include/libnl3 -lnl-3 -lnl-route-3 -lnl-3 configure: mscom: no configure: xdr: configure: rbd: no configure: pm-utils: yes configure: configure: Test suite configure: configure: Coverage: no configure: Alloc OOM: no configure: configure: Miscellaneous configure: configure: Debug: yes configure: Use -Werror: no configure: Warning Flags: -W -Waddress -Waggressive-loop-optimizations -Wall -Warray-bounds -Wattributes -Wbad-function-cast -Wbuiltin-macro-redefined -Wcast-align -Wchar-subscripts -Wclobbered -Wcomment -Wcomments -Wcoverage-mismatch -Wcpp -Wdeprecated-declarations -Wdisabled-optimization -Wdiv-by-zero -Wdouble-promotion -Wempty-body -Wendif-labels -Wextra -Wformat-contains-nul -Wformat-extra-args -Wformat-security -Wformat-y2k -Wformat-zero-length -Wfree-nonheap-object -Wignored-qualifiers -Wimplicit -Wimplicit-function-declaration -Wimplicit-int -Winit-self -Winline -Wint-to-pointer-cast -Winvalid-memory-model -Winvalid-pch -Wjump-misses-init -Wlogical-op -Wmain -Wmaybe-uninitialized -Wmissing-braces -Wmissing-declarations -Wmissing-field-initializers -Wmissing-include-dirs -Wmissing-parameter-type -Wmissing-prototypes -Wmultichar -Wnarrowing -Wnested-externs -Wnonnull -Wnormalized=nfc -Wold-style-declaration -Wold-style-definition -Woverflow -Woverride-init -Wpacked-bitfield-compat -Wparentheses -Wpointer-arith -Wpointer-sign -Wpointer-to-int-cast -Wpragmas -Wreturn-local-addr -Wreturn-type -Wsequence-point -Wshadow -Wsizeof-pointer-memaccess -Wstrict-aliasing -Wstrict-prototypes -Wsuggest-attribute=const -Wsuggest-attribute=format -Wsuggest-attribute=noreturn -Wsuggest-attribute=pure -Wswitch -Wsync-nand -Wtrampolines -Wtrigraphs -Wtype-limits -Wuninitialized -Wunknown-pragmas -Wunused -Wunused-but-set-parameter -Wunused-but-set-variable -Wunused-function -Wunused-label -Wunused-local-typedefs -Wunused-parameter -Wunused-result -Wunused-value -Wunused-variable -Wvarargs -Wvariadic-macros -Wvector-operation-performance -Wvolatile-register-var -Wwrite-strings -fdiagnostics-show-option -funit-at-a-time -Wno-sign-compare -Wjump-misses-init -Wno-format-nonliteral -Wframe-larger-than=4096 -fstack-protector-strong -fexceptions -fasynchronous-unwind-tables -fipa-pure-const -Wno-suggest-attribute=pure -Wno-suggest-attribute=const configure: DTrace: no configure: numad: no configure: XML Catalog: /etc/xml/catalog configure: Init script: check configure: Char device locks: /var/lock configure: configure: Developer Tools configure: configure: Wireshark dissector: no configure: configure: Privileges configure: configure: QEMU: root:root The compilation finishes without any problems but in the execution of the tests fails virnetmessagetest. When i tried using the libvirtd running without any problems but I can not run the Connection with the virsh command virsh -c qemu:///system that returns the following error: "Unable to encode message header" and the log shows the error: "virNetSocketReadWire: 1523: End of file while reading dates: Error of input / output". There 's someone who can give me a hand to solve the problem? thanks Stefano

-- libvir-list mailing list libvir-list(a)redhat.com https://www.redhat.com/mailman/listinfo/libvir-list