These APIs are exposed under new virsh command 'domtime' which both gets
and sets (not at the same time of course :)).
Signed-off-by: Michal Privoznik <mprivozn(a)redhat.com>
---
diff to v4:
- changed wording in some help messages
- use VSH_EXCLUSIVE_OPTIONS instead explicit separate code
tools/virsh-domain-monitor.c | 116 +++++++++++++++++++++++++++++++++++++++++++
tools/virsh.pod | 18 +++++++
2 files changed, 134 insertions(+)
diff --git a/tools/virsh-domain-monitor.c b/tools/virsh-domain-monitor.c
index 18d551a..a3b66ed 100644
--- a/tools/virsh-domain-monitor.c
+++ b/tools/virsh-domain-monitor.c
@@ -1356,6 +1356,116 @@ cmdDomstate(vshControl *ctl, const vshCmd *cmd)
}
/*
+ * "domtime" command
+ */
+static const vshCmdInfo info_domtime[] = {
+ {.name = "help",
+ .data = N_("domain time")
+ },
+ {.name = "desc",
+ .data = N_("Gets or sets the domain's system time")
+ },
+ {.name = NULL}
+};
+
+static const vshCmdOptDef opts_domtime[] = {
+ {.name = "domain",
+ .type = VSH_OT_DATA,
+ .flags = VSH_OFLAG_REQ,
+ .help = N_("domain name, id or uuid")
+ },
+ {.name = "now",
+ .type = VSH_OT_BOOL,
+ .help = N_("set to the time of the host running virsh")
+ },
+ {.name = "pretty",
+ .type = VSH_OT_BOOL,
+ .help = N_("print domain's time in human readable form")
+ },
+ {.name = "sync",
+ .type = VSH_OT_BOOL,
+ .help = N_("instead of setting given time, synchronize from domain's
RTC"),
+ },
+ {.name = "time",
+ .type = VSH_OT_INT,
+ .help = N_("time to set")
+ },
+ {.name = NULL}
+};
+
+static bool
+cmdDomTime(vshControl *ctl, const vshCmd *cmd)
+{
+ virDomainPtr dom;
+ bool ret = false;
+ bool now = vshCommandOptBool(cmd, "now");
+ bool pretty = vshCommandOptBool(cmd, "pretty");
+ bool sync = vshCommandOptBool(cmd, "sync");
+ long long seconds = 0;
+ unsigned int nseconds = 0;
+ unsigned int flags = 0;
+ bool doSet = false;
+ int rv;
+
+ VSH_EXCLUSIVE_OPTIONS("time", "now");
+ VSH_EXCLUSIVE_OPTIONS("time", "sync");
+ VSH_EXCLUSIVE_OPTIONS("now", "sync");
+
+ if (!(dom = vshCommandOptDomain(ctl, cmd, NULL)))
+ return false;
+
+ rv = vshCommandOptLongLong(cmd, "time", &seconds);
+
+ if (rv < 0) {
+ /* invalid integer format */
+ vshError(ctl, "%s",
+ _("Unable to parse integer parameter to --time."));
+ goto cleanup;
+ } else if (rv > 0) {
+ /* valid integer to set */
+ doSet = true;
+ }
+
+ if (doSet || now || sync) {
+ if (now && ((seconds = time(NULL)) == (time_t) -1)) {
+ vshError(ctl, _("Unable to get current time"));
+ goto cleanup;
+ }
+
+ if (sync)
+ flags |= VIR_DOMAIN_TIME_SYNC;
+
+ if (virDomainSetTime(dom, seconds, nseconds, flags) < 0)
+ goto cleanup;
+
+ } else {
+ if (virDomainGetTime(dom, &seconds, &nseconds, flags) < 0)
+ goto cleanup;
+
+ if (pretty) {
+ char timestr[100];
+ time_t cur_time = seconds;
+ struct tm time_info;
+
+ if (!gmtime_r(&cur_time, &time_info)) {
+ vshError(ctl, _("Unable to format time"));
+ goto cleanup;
+ }
+ strftime(timestr, sizeof(timestr), "%Y-%m-%d %H:%M:%S",
&time_info);
+
+ vshPrint(ctl, _("Time: %s"), timestr);
+ } else {
+ vshPrint(ctl, _("Time: %lld"), seconds);
+ }
+ }
+
+ ret = true;
+ cleanup:
+ virDomainFree(dom);
+ return ret;
+}
+
+/*
* "list" command
*/
static const vshCmdInfo info_list[] = {
@@ -1911,6 +2021,12 @@ const vshCmdDef domMonitoringCmds[] = {
.info = info_domstate,
.flags = 0
},
+ {.name = "domtime",
+ .handler = cmdDomTime,
+ .opts = opts_domtime,
+ .info = info_domtime,
+ .flags = 0
+ },
{.name = "list",
.handler = cmdList,
.opts = opts_list,
diff --git a/tools/virsh.pod b/tools/virsh.pod
index 22ca196..120715a 100644
--- a/tools/virsh.pod
+++ b/tools/virsh.pod
@@ -1017,6 +1017,24 @@ Returns state of an interface to VMM used to control a domain.
For
states other than "ok" or "error" the command also prints number of
seconds elapsed since the control interface entered its current state.
+=item B<domtime> I<domain> { [I<--now>] [I<--pretty>]
[I<--sync>]
+[I<--time> B<time>] }
+
+Gets or sets the domain's system time. When run without any arguments
+(but I<domain>), the current domain's system time is printed out. The
+I<--pretty> modifier can be used to print the time in more human
+readable form.
+
+When I<--time> B<time> is specified, the domain's time is
+not get but set instead. The I<--now> modifier acts like if it was an
+alias for I<--time> B<$now>, which means it sets the time that is
+currently on the host virsh is running at. In both cases (setting and
+getting), time is in seconds relative to Epoch of 1970-01-01 in UTC.
+The I<--sync> modifies the set behavior a bit: The time passed is
+ignored, but the time to set is read from domain's RTC instead. Please
+note, that some hypervisors may require a guest agent to be configured
+in order to get or set the guest time.
+
=item B<domxml-from-native> I<format> I<config>
Convert the file I<config> in the native guest configuration format
--
1.9.3