This series adds both riscv32 and riscv64 kvm support, and implements
migration based on riscv.
Because of RISC-V KVM has been merged into the Linux master, so this
series are changed from RFC to patch.
Several steps to use this:
1. Build emulation
$ ./configure --target-list=riscv64-softmmu
$ make -j$(nproc)
2. Build kernel
3. Build QEMU VM
Cross built in riscv toolchain.
$ PKG_CONFIG_LIBDIR=<toolchain pkgconfig path>
$ export PKG_CONFIG_SYSROOT_DIR=<toolchain sysroot path>
$ ./configure --target-list=riscv64-softmmu --enable-kvm \
--cross-prefix=riscv64-linux-gnu- --disable-libiscsi --disable-glusterfs \
--disable-libusb --disable-usb-redir --audio-drv-list= --disable-opengl \
--disable-libxml2
$ make -j$(nproc)
4. Start emulation
$ ./qemu-system-riscv64 -M virt -m 4096M -cpu rv64,x-h=true -nographic \
-name guest=riscv-hyp,debug-threads=on \
-smp 4 \
-bios ./fw_jump.bin \
-kernel ./Image \
-drive file=./hyp.img,format=raw,id=hd0 \
-device virtio-blk-device,drive=hd0 \
-append "root=/dev/vda rw console=ttyS0 earlycon=sbi"
5. Start kvm-acceled QEMU VM in emulation
$ ./qemu-system-riscv64 -M virt,accel=kvm -m 1024M -cpu host -nographic \
-name guest=riscv-guset \
-smp 2 \
-bios none \
-kernel ./Image \
-drive file=./guest.img,format=raw,id=hd0 \
-device virtio-blk-device,drive=hd0 \
-append "root=/dev/vda rw console=ttyS0 earlycon=sbi"
Changes since patch v2
- Create a macro for get and put timer csr.
- Remove M-mode PLIC contexts when kvm is enabled.
- Add get timer frequency.
- Move cpu_host_load to vmstate_kvmtimer.
Changes since patch v1
- Rebase on recent commit a216e7cf119c91ffdf5931834a1a030ebea40d70
- Sync-up headers with Linux-5.16-rc4.
- Fixbug in kvm_arch_init_vcpu.
- Create a macro for get and put regs csr.
- Start kernel directly when kvm_enabled.
- Use riscv_cpu_set_irq to inject KVM interrupts.
- Use the Semihosting Console API for RISC-V kvm handle sbi.
- Update vmstate_riscv_cpu version id.
Placing kvm_timer into a subsection.
Changes since RFC v6
- Rebase on recent commit 8627edfb3f1fca24a96a0954148885c3241c10f8
- Sync-up headers with Linux-5.16-rc1
Changes since RFC v5
- Rebase on QEMU v6.1.0-rc1 and kvm-riscv linux v19.
- Move kvm interrupt setting to riscv_cpu_update_mip().
- Replace __u64 with uint64_t.
Changes since RFC v4
- Rebase on QEMU v6.0.0-rc2 and kvm-riscv linux v17.
- Remove time scaling support as software solution is incomplete.
Because it will cause unacceptable performance degradation. and
We will post a better solution.
- Revise according to Alistair's review comments.
- Remove compile time XLEN checks in kvm_riscv_reg_id
- Surround TYPE_RISCV_CPU_HOST definition by CONFIG_KVM and share
it between RV32 and RV64.
- Add kvm-stub.c for reduce unnecessary compilation checks.
- Add riscv_setup_direct_kernel() to direct boot kernel for KVM.
Changes since RFC v3
- Rebase on QEMU v5.2.0-rc2 and kvm-riscv linux v15.
- Add time scaling support(New patches 13, 14 and 15).
- Fix the bug that guest vm can't reboot.
Changes since RFC v2
- Fix checkpatch error at target/riscv/sbi_ecall_interface.h.
- Add riscv migration support.
Changes since RFC v1
- Add separate SBI ecall interface header.
- Add riscv32 kvm accel support.
Yifei Jiang (12):
update-linux-headers: Add asm-riscv/kvm.h
target/riscv: Add target/riscv/kvm.c to place the public kvm interface
target/riscv: Implement function kvm_arch_init_vcpu
target/riscv: Implement kvm_arch_get_registers
target/riscv: Implement kvm_arch_put_registers
target/riscv: Support start kernel directly by KVM
target/riscv: Support setting external interrupt by KVM
target/riscv: Handle KVM_EXIT_RISCV_SBI exit
target/riscv: Add host cpu type
target/riscv: Add kvm_riscv_get/put_regs_timer
target/riscv: Implement virtual time adjusting with vm state changing
target/riscv: Support virtual time context synchronization
hw/intc/sifive_plic.c | 8 +-
hw/riscv/boot.c | 16 +-
hw/riscv/virt.c | 87 +++--
include/hw/riscv/boot.h | 1 +
linux-headers/asm-riscv/kvm.h | 128 +++++++
meson.build | 2 +
target/riscv/cpu.c | 29 +-
target/riscv/cpu.h | 11 +
target/riscv/kvm-stub.c | 30 ++
target/riscv/kvm.c | 533 +++++++++++++++++++++++++++++
target/riscv/kvm_riscv.h | 25 ++
target/riscv/machine.c | 30 ++
target/riscv/meson.build | 1 +
target/riscv/sbi_ecall_interface.h | 72 ++++
14 files changed, 944 insertions(+), 29 deletions(-)
create mode 100644 linux-headers/asm-riscv/kvm.h
create mode 100644 target/riscv/kvm-stub.c
create mode 100644 target/riscv/kvm.c
create mode 100644 target/riscv/kvm_riscv.h
create mode 100644 target/riscv/sbi_ecall_interface.h
--
2.19.1