Re: [PATCH] lxc: Add TPM passthrough option for LXC driver
On 8/16/20 1:16 PM, Julio Faracco wrote:
There is no support to use TPM for passthrough for LXC libvirt
driver
this commit adds the option to use host TPM inside containers.
".... for LXC libvirt driver. This commit adds the option ..."
Signed-off-by: Julio Faracco <jcfaracco(a)gmail.com>
---
src/lxc/lxc_cgroup.c | 27 +++++++++++++++++++
src/lxc/lxc_controller.c | 56 ++++++++++++++++++++++++++++++++++++++++
2 files changed, 83 insertions(+)
diff --git a/src/lxc/lxc_cgroup.c b/src/lxc/lxc_cgroup.c
index d13f2adde5..955d2b4fc1 100644
--- a/src/lxc/lxc_cgroup.c
+++ b/src/lxc/lxc_cgroup.c
@@ -374,6 +374,33 @@ static int virLXCCgroupSetupDeviceACL(virDomainDefPtr def,
return -1;
}
+ for (i = 0; i < def->ntpms; i++) {
+ virDomainTPMDefPtr tpm = def->tpms[i];
+ const char *dev = NULL;
+
+ switch (tpm->type) {
+ case VIR_DOMAIN_TPM_TYPE_EMULATOR:
+ case VIR_DOMAIN_TPM_TYPE_LAST:
+ break;
+ case VIR_DOMAIN_TPM_TYPE_PASSTHROUGH:
+ dev = "/dev/tpm0";
+ break;
+ }
+
+ if (!dev)
+ continue;
Tou're making an assumption here that the host TPM will always be in /dev/tpm0.
This is most likely to be the case but it has some potential for backfiring.
I don't have access to an LXC env to see how much of a disaster this could
case, so I'll take your word for it.
That said, since 'dev' doesn't change value and you only about TPM
PASSTHROUGH,
you can roll something like this (ps: I didn't compile it):
for (i = 0; i < def->ntpms; i++) {
virDomainTPMDefPtr tpm = def->tpms[i];
const char *dev = "/dev/tpm0";
if (tpm->type != VIR_DOMAIN_TPM_TYPE_PASSTHROUGH)
continue;
// if /dev/tpm0 does not exist the whole loop can be skipped
if (!virFileExists(dev))
break;
if (virCgroupAllowDevicePath(cgroup, dev,
VIR_CGROUP_DEVICE_READ,
false) < 0)
return -1;
// even if there are more than one TPM passthrough dev, you just
// care about /dev/tpm0 and you already set the cgroup for it,
// so break out the loop.
break;
}
+
+ if (!virFileExists(dev)) {
+ VIR_DEBUG("Ignoring non-existent device %s", dev);
+ continue;
+ }
+
+ if (virCgroupAllowDevicePath(cgroup, dev,
+ VIR_CGROUP_DEVICE_READ,
+ false) < 0)
+ return -1;
+ }
+
VIR_DEBUG("Device ACL setup complete");
return 0;
diff --git a/src/lxc/lxc_controller.c b/src/lxc/lxc_controller.c
index ae6b737b60..70ca773bbf 100644
--- a/src/lxc/lxc_controller.c
+++ b/src/lxc/lxc_controller.c
@@ -1644,6 +1644,59 @@ virLXCControllerSetupHostdevSubsysUSB(virDomainDefPtr vmDef,
}
+static int
+virLXCControllerSetupTPM(virLXCControllerPtr ctrl)
+{
+ virDomainDefPtr def = ctrl->def;
+ size_t i;
+
+ for (i = 0; i < def->ntpms; i++) {
+ virDomainTPMDefPtr tpm = def->tpms[i];
+ g_autofree char *path = NULL;
+ const char *tpm_dev = NULL;
+ struct stat sb;
+ dev_t dev;
+
+ switch (tpm->type) {
+ case VIR_DOMAIN_TPM_TYPE_EMULATOR:
+ case VIR_DOMAIN_TPM_TYPE_LAST:
+ virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
+ _("unsupported timer type (name) '%s'"),
I believe you meant "unsupported TPM device" instead of timer.
+
virDomainTPMBackendTypeToString(tpm->type));
+ return -1;
+ case VIR_DOMAIN_TPM_TYPE_PASSTHROUGH:
+ tpm_dev = "/dev/tpm0";
+ path = g_strdup_printf("/%s/%s.dev/%s", LXC_STATE_DIR,
+ def->name, "/rtc");
+ break;
+ }
+
+ if (!tpm_dev)
+ continue;
I believe this code can be simplified in a similar fashion like I mentioned
up there for virLXCCgroupSetupDeviceACL.
Thanks,
DHB