11:03 a.m.
Add support for a new <pool type='gluster'>, similar to
RBD and Sheepdog. Terminology wise, a gluster volume
forms a libvirt storage pool, within the gluster volume,
individual files are treated as libvirt storage volumes.
* docs/schemas/storagepool.rng (poolgluster): New pool type.
* docs/formatstorage.html.in: Document gluster.
* docs/storage.html.in: Likewise, and contrast it with netfs.
* tests/storagepoolxml2xmlin/pool-gluster.xml: New test.
* tests/storagepoolxml2xmlout/pool-gluster.xml: Likewise.
* tests/storagepoolxml2xmltest.c (mymain): Likewise.
Signed-off-by: Eric Blake <eblake(a)redhat.com>
---
docs/formatstorage.html.in | 11 ++--
docs/schemas/storagepool.rng | 21 +++++++
docs/storage.html.in | 90 +++++++++++++++++++++++++++-
tests/storagepoolxml2xmlin/pool-gluster.xml | 8 +++
tests/storagepoolxml2xmlout/pool-gluster.xml | 11 ++++
tests/storagepoolxml2xmltest.c | 1 +
6 files changed, 136 insertions(+), 6 deletions(-)
create mode 100644 tests/storagepoolxml2xmlin/pool-gluster.xml
create mode 100644 tests/storagepoolxml2xmlout/pool-gluster.xml
diff --git a/docs/formatstorage.html.in b/docs/formatstorage.html.in
index 90eeaa3..e74ad27 100644
--- a/docs/formatstorage.html.in
+++ b/docs/formatstorage.html.in
@@ -21,8 +21,10 @@
<code>iscsi</code>, <code>logical</code>,
<code>scsi</code>
(all <span class="since">since 0.4.1</span>),
<code>mpath</code>
(<span class="since">since 0.7.1</span>),
<code>rbd</code>
- (<span class="since">since 0.9.13</span>), or
<code>sheepdog</code>
- (<span class="since">since 0.10.0</span>). This corresponds
to the
+ (<span class="since">since 0.9.13</span>),
<code>sheepdog</code>
+ (<span class="since">since 0.10.0</span>),
+ or <code>gluster</code> (<span class="since">since
+ 1.1.4</span>). This corresponds to the
storage backend drivers listed further along in this document.
</p>
<h3><a name="StoragePoolFirst">General
metadata</a></h3>
@@ -129,7 +131,7 @@
<dt><code>host</code></dt>
<dd>Provides the source for pools backed by storage from a
remote server (pool types <code>netfs</code>,
<code>iscsi</code>,
- <code>rbd</code>, <code>sheepdog</code>). Will be
+ <code>rbd</code>, <code>sheepdog</code>,
<code>gluster</code>). Will be
used in combination with a <code>directory</code>
or <code>device</code> element. Contains an attribute
<code>name</code>
which is the hostname or IP address of the server. May optionally
@@ -160,7 +162,8 @@
<dt><code>name</code></dt>
<dd>Provides the source for pools backed by storage from a
named element (pool types <code>logical</code>,
<code>rbd</code>,
- <code>sheepdog</code>). Contains a string identifier.
+ <code>sheepdog</code>, <code>gluster</code>). Contains
a
+ string identifier.
<span class="since">Since 0.4.5</span></dd>
<dt><code>format</code></dt>
<dd>Provides information about the format of the pool (pool
diff --git a/docs/schemas/storagepool.rng b/docs/schemas/storagepool.rng
index 66d3c22..17a3ae8 100644
--- a/docs/schemas/storagepool.rng
+++ b/docs/schemas/storagepool.rng
@@ -21,6 +21,7 @@
<ref name='poolmpath'/>
<ref name='poolrbd'/>
<ref name='poolsheepdog'/>
+ <ref name='poolgluster'/>
</choice>
</element>
</define>
@@ -145,6 +146,17 @@
</interleave>
</define>
+ <define name='poolgluster'>
+ <attribute name='type'>
+ <value>gluster</value>
+ </attribute>
+ <interleave>
+ <ref name='commonmetadata'/>
+ <ref name='sizing'/>
+ <ref name='sourcegluster'/>
+ </interleave>
+ </define>
+
<define name='sourceinfovendor'>
<interleave>
<optional>
@@ -555,6 +567,15 @@
</element>
</define>
+ <define name='sourcegluster'>
+ <element name='source'>
+ <interleave>
+ <ref name='sourceinfohost'/>
+ <ref name='sourceinfoname'/>
+ </interleave>
+ </element>
+ </define>
+
<define name='IscsiQualifiedName'>
<data type='string'>
<param
name="pattern">iqn\.[0-9]{4}-(0[1-9]|1[0-2])\.[a-zA-Z0-9\.\-]+(:.+)?</param>
diff --git a/docs/storage.html.in b/docs/storage.html.in
index 1181444..339759d 100644
--- a/docs/storage.html.in
+++ b/docs/storage.html.in
@@ -114,6 +114,9 @@
<li>
<a href="#StorageBackendSheepdog">Sheepdog backend</a>
</li>
+ <li>
+ <a href="#StorageBackendGluster">Gluster backend</a>
+ </li>
</ul>
<h2><a name="StorageBackendDir">Directory
pool</a></h2>
@@ -275,10 +278,12 @@
<code>nfs</code>
</li>
<li>
- <code>glusterfs</code>
+ <code>glusterfs</code> - use the glusterfs FUSE file system
+ (to bypass the file system completely, see
+ the <a href="#StorageBackendGluster">gluster</a> pool).
</li>
<li>
- <code>cifs</code>
+ <code>cifs</code> - use the SMB (samba) or CIFS file system
</li>
</ul>
@@ -647,5 +652,86 @@
The Sheepdog pool does not use the volume format type element.
</p>
+ <h2><a name="StorageBackendGluster">Gluster
pools</a></h2>
+ <p>
+ This provides a pool based on native Gluster access. Gluster is
+ a distributed file system that can be exposed to the user via
+ FUSE, NFS or SMB (see the <a
href="#StorageBackendNetfs">netfs</a>
+ pool for that usage); but for minimal overhead, the ideal access
+ is via native access (only possible for QEMU/KVM compiled with
+ libgfapi support).
+
+ The cluster and storage volume must already be running, and it
+ is recommended that the volume be configured with <code>gluster
+ volume set $volname storage.owner-uid=$uid</code>
+ and <code>gluster volume set $volname
+ storage.owner-gid=$gid</code> for the uid and gid that qemu will
+ be run as. It may also be necessary to
+ set <code>rpc-auth-allow-insecure on</code> for the glusterd
+ service, as well as <code>gluster set $volname
+ server.allow-insecure on</code>, to allow access to the gluster
+ volume.
+
+ <span class="since">Since 1.1.4</span>
+ </p>
+
+ <h3>Example pool input</h3>
+ <p>A gluster volume corresponds to a libvirt storage pool. If a
+ gluster volume could be mounted as <code>mount -t glusterfs
+ localhost:/volname /some/path</code>, then the following example
+ will describe the same pool without having to create a local
+ mount point. Remember that with gluster, the mount point can be
+ through any machine in the cluster, and gluster will
+ automatically pick the ideal transport to the actual bricks
+ backing the gluster volume, even if on a different host than the
+ one named in the <code>host</code> designation. It is also
+ permitted to
+ use <code><name>volume/dir</name></code> to
limit
+ the pool to a subdirectory within the gluster volume.</p>
+ <pre>
+ <pool type="gluster">
+ <name>myglusterpool</name>
+ <source>
+ <name>volname</name>
+ <host name='localhost'/>
+ </source>
+ </pool></pre>
+
+ <h3>Example volume output</h3>
+ <p>Libvirt storage volumes associated with a gluster pool
+ correspond to the files that can be found when mounting the
+ gluster volume. The <code>name</code> is the path relative to
+ the effective mount specified for the pool; and
+ the <code>key</code> is the path including the gluster volume
+ name and any subdirectories specified by the pool.</p>
+ <pre>
+ <volume>
+ <name>myfile</name>
+ <key>volname/myfile</key>
+ <source>
+ </source>
+ <capacity
unit='bytes'>53687091200</capacity>
+ <allocation
unit='bytes'>53687091200</allocation>
+ </volume></pre>
+
+ <h3>Example disk attachment</h3>
+ <p>Files within a gluster volume can be attached to Qemu guests.
+ Information about attaching a Gluster image to a
+ guest can be found
+ at the <a href="formatdomain.html#elementsDisks">format
domain</a>
+ page.</p>
+
+ <h3>Valid pool format types</h3>
+ <p>
+ The Gluster pool does not use the pool format type element.
+ </p>
+
+ <h3>Valid volume format types</h3>
+ <p>
+ The Gluster pool does not use the volume format type element;
+ for now, all files within a gluster pool are assumed to have raw
+ format.
+ </p>
+
</body>
</html>
diff --git a/tests/storagepoolxml2xmlin/pool-gluster.xml
b/tests/storagepoolxml2xmlin/pool-gluster.xml
new file mode 100644
index 0000000..ae9401f
--- /dev/null
+++ b/tests/storagepoolxml2xmlin/pool-gluster.xml
@@ -0,0 +1,8 @@
+<pool type='gluster'>
+ <source>
+ <name>volume</name>
+ <host name='localhost'/>
+ </source>
+ <name>mygluster</name>
+ <uuid>65fcba04-5b13-bd93-cff3-52ce48e11ad8</uuid>
+</pool>
diff --git a/tests/storagepoolxml2xmlout/pool-gluster.xml
b/tests/storagepoolxml2xmlout/pool-gluster.xml
new file mode 100644
index 0000000..5844c1a
--- /dev/null
+++ b/tests/storagepoolxml2xmlout/pool-gluster.xml
@@ -0,0 +1,11 @@
+<pool type='gluster'>
+ <name>mygluster</name>
+ <uuid>65fcba04-5b13-bd93-cff3-52ce48e11ad8</uuid>
+ <capacity unit='bytes'>0</capacity>
+ <allocation unit='bytes'>0</allocation>
+ <available unit='bytes'>0</available>
+ <source>
+ <host name='localhost'/>
+ <name>volume</name>
+ </source>
+</pool>
diff --git a/tests/storagepoolxml2xmltest.c b/tests/storagepoolxml2xmltest.c
index 0ae9b29..0ab72e4 100644
--- a/tests/storagepoolxml2xmltest.c
+++ b/tests/storagepoolxml2xmltest.c
@@ -100,6 +100,7 @@ mymain(void)
DO_TEST("pool-iscsi-multiiqn");
DO_TEST("pool-iscsi-vendor-product");
DO_TEST("pool-sheepdog");
+ DO_TEST("pool-gluster");
return ret==0 ? EXIT_SUCCESS : EXIT_FAILURE;
}
--
1.8.3.1