[libvirt] [PATCH 1/5] qemu: Fix hyperv features with QEMU 4.1
Originally the names of the hyperv CPU features were only used
internally for looking up their CPUID bits. So we used "__kvm_hv_"
prefix for them to make sure the names do not collide with normal CPU
features stored in our CPU map.
But with QEMU 4.1 we check which features were enabled or disabled by a
freshly started QEMU process using their names rather than their CPUID
bits (mostly because of MSR features). Thus we need to change our made
up internal names into the actual names used by QEMU. Most of the names
are only used with QEMU 4.1 and newer and the reset was introduced with
QEMU recently enough to already support spelling with "-". Thus we don't
need to define them as "hv_*" with a translation to "hv-*" for new
QEMU.
Without this patch libvirt would mistakenly report all hyperv features
as unavailable and refuse to start any domain using them with QEMU 4.1.
Reported-by: Vitaly Kuznetsov <vkuznets(a)redhat.com>
Signed-off-by: Jiri Denemark <jdenemar(a)redhat.com>
---
src/cpu/cpu_x86_data.h | 28 ++++++++++++++--------------
src/qemu/qemu_process.c | 2 +-
2 files changed, 15 insertions(+), 15 deletions(-)
diff --git a/src/cpu/cpu_x86_data.h b/src/cpu/cpu_x86_data.h
index f3f4d7ab9c..bb781707aa 100644
--- a/src/cpu/cpu_x86_data.h
+++ b/src/cpu/cpu_x86_data.h
@@ -56,21 +56,21 @@ struct _virCPUx86MSR {
/*
* The following HyperV feature names suffixes must exactly match corresponding
* ones defined for virDomainHyperv in domain_conf.c.
- * E.g "__kvm_runtime" -> "runtime",
"__kvm_hv_spinlocks" -> "spinlocks" etc.
+ * E.g "hv-runtime" -> "runtime", "hv-spinlocks" ->
"spinlocks" etc.
*/
-#define VIR_CPU_x86_KVM_HV_RUNTIME "__kvm_hv_runtime"
-#define VIR_CPU_x86_KVM_HV_SYNIC "__kvm_hv_synic"
-#define VIR_CPU_x86_KVM_HV_STIMER "__kvm_hv_stimer"
-#define VIR_CPU_x86_KVM_HV_RELAXED "__kvm_hv_relaxed"
-#define VIR_CPU_x86_KVM_HV_SPINLOCKS "__kvm_hv_spinlocks"
-#define VIR_CPU_x86_KVM_HV_VAPIC "__kvm_hv_vapic"
-#define VIR_CPU_x86_KVM_HV_VPINDEX "__kvm_hv_vpindex"
-#define VIR_CPU_x86_KVM_HV_RESET "__kvm_hv_reset"
-#define VIR_CPU_x86_KVM_HV_FREQUENCIES "__kvm_hv_frequencies"
-#define VIR_CPU_x86_KVM_HV_REENLIGHTENMENT "__kvm_hv_reenlightenment"
-#define VIR_CPU_x86_KVM_HV_TLBFLUSH "__kvm_hv_tlbflush"
-#define VIR_CPU_x86_KVM_HV_IPI "__kvm_hv_ipi"
-#define VIR_CPU_x86_KVM_HV_EVMCS "__kvm_hv_evmcs"
+#define VIR_CPU_x86_KVM_HV_RUNTIME "hv-runtime"
+#define VIR_CPU_x86_KVM_HV_SYNIC "hv-synic"
+#define VIR_CPU_x86_KVM_HV_STIMER "hv-stimer"
+#define VIR_CPU_x86_KVM_HV_RELAXED "hv-relaxed"
+#define VIR_CPU_x86_KVM_HV_SPINLOCKS "hv-spinlocks"
+#define VIR_CPU_x86_KVM_HV_VAPIC "hv-vapic"
+#define VIR_CPU_x86_KVM_HV_VPINDEX "hv-vpindex"
+#define VIR_CPU_x86_KVM_HV_RESET "hv-reset"
+#define VIR_CPU_x86_KVM_HV_FREQUENCIES "hv-frequencies"
+#define VIR_CPU_x86_KVM_HV_REENLIGHTENMENT "hv-reenlightenment"
+#define VIR_CPU_x86_KVM_HV_TLBFLUSH "hv-tlbflush"
+#define VIR_CPU_x86_KVM_HV_IPI "hv-ipi"
+#define VIR_CPU_x86_KVM_HV_EVMCS "hv-evmcs"
#define VIR_CPU_X86_DATA_INIT { 0 }
diff --git a/src/qemu/qemu_process.c b/src/qemu/qemu_process.c
index 75205bc121..7561781848 100644
--- a/src/qemu/qemu_process.c
+++ b/src/qemu/qemu_process.c
@@ -4104,7 +4104,7 @@ qemuProcessVerifyHypervFeatures(virDomainDefPtr def,
if (def->hyperv_features[i] != VIR_TRISTATE_SWITCH_ON)
continue;
- if (virAsprintf(&cpuFeature, "__kvm_hv_%s",
+ if (virAsprintf(&cpuFeature, "hv-%s",
virDomainHypervTypeToString(i)) < 0)
return -1;
--
2.22.0