8:49 a.m.
The lowest level function of this trio
(qemuDomainDeviceCalculatePCIConnectFlags()) aims to be the single
authority for the virDomainPCIConnectFlags to use for any given device
using a particular arch/machinetype/qemu-binary.
qemuDomainFillDevicePCIConnectFlags() sets info->pciConnectFlags in a
single device (unless it has no virDomainDeviceInfo, in which case
it's a NOP).
qemuDomainFillAllPCIConnectFlags() sets info->pciConnectFlags in all
devices that have a virDomainDeviceInfo
The latter two functions aren't called anywhere yet. This commit is
just making them available. Later patches will replace all the current
hodge-podge of flag settings with calls to this single authority.
---
src/conf/device_conf.h | 5 +
src/qemu/qemu_domain_address.c | 367 +++++++++++++++++++++++++++++++++++++++++
2 files changed, 372 insertions(+)
diff --git a/src/conf/device_conf.h b/src/conf/device_conf.h
index 8443de6..f435fb5 100644
--- a/src/conf/device_conf.h
+++ b/src/conf/device_conf.h
@@ -142,6 +142,11 @@ typedef struct _virDomainDeviceInfo {
/* bootIndex is only used for disk, network interface, hostdev
* and redirdev devices */
unsigned int bootIndex;
+
+ /* pciConnectFlags is only used internally during address
+ * assignment, never saved and never reported.
+ */
+ int pciConnectFlags; /* enum virDomainPCIConnectFlags */
} virDomainDeviceInfo, *virDomainDeviceInfoPtr;
diff --git a/src/qemu/qemu_domain_address.c b/src/qemu/qemu_domain_address.c
index e206b9f..602179c 100644
--- a/src/qemu/qemu_domain_address.c
+++ b/src/qemu/qemu_domain_address.c
@@ -407,6 +407,373 @@ qemuDomainAssignARMVirtioMMIOAddresses(virDomainDefPtr def,
}
+/**
+ * qemuDomainDeviceCalculatePCIConnectFlags:
+ *
+ * @dev: The device to be checked
+ * @pcieFlags: flags to use for a known PCI Express device
+ * @virtioFlags: flags to use for a virtio device (properly vetted
+ * for the current qemu binary and arch/machinetype)
+ *
+ * Lowest level function to determine PCI connectFlags for a
+ * device. This function relies on the next higher-level function
+ * determining the value for pcieFlags and virtioFlags in advance -
+ * this is to make it more efficient to call multiple times.
+ *
+ * Returns appropriate virDomainPCIConnectFlags for this device in
+ * this domain, or 0 if the device doesn't connect using PCI. There
+ * is no failure.
+ */
+static virDomainPCIConnectFlags
+qemuDomainDeviceCalculatePCIConnectFlags(virDomainDeviceDefPtr dev,
+ virDomainPCIConnectFlags pcieFlags
+ ATTRIBUTE_UNUSED,
+ virDomainPCIConnectFlags virtioFlags
+ ATTRIBUTE_UNUSED)
+{
+ virDomainPCIConnectFlags pciFlags = (VIR_PCI_CONNECT_TYPE_PCI_DEVICE |
+ VIR_PCI_CONNECT_HOTPLUGGABLE);
+
+ switch ((virDomainDeviceType)dev->type) {
+ case VIR_DOMAIN_DEVICE_CONTROLLER: {
+ virDomainControllerDefPtr cont = dev->data.controller;
+
+ switch ((virDomainControllerType)cont->type) {
+ case VIR_DOMAIN_CONTROLLER_TYPE_PCI:
+ return virDomainPCIControllerModelToConnectType(cont->model);
+
+ case VIR_DOMAIN_CONTROLLER_TYPE_SATA:
+ return pciFlags;
+
+ case VIR_DOMAIN_CONTROLLER_TYPE_USB:
+ switch ((virDomainControllerModelUSB)cont->model) {
+ case VIR_DOMAIN_CONTROLLER_MODEL_USB_NEC_XHCI:
+ return pciFlags;
+
+ case VIR_DOMAIN_CONTROLLER_MODEL_USB_EHCI:
+ case VIR_DOMAIN_CONTROLLER_MODEL_USB_ICH9_EHCI1:
+ case VIR_DOMAIN_CONTROLLER_MODEL_USB_ICH9_UHCI1:
+ case VIR_DOMAIN_CONTROLLER_MODEL_USB_ICH9_UHCI2:
+ case VIR_DOMAIN_CONTROLLER_MODEL_USB_ICH9_UHCI3:
+ case VIR_DOMAIN_CONTROLLER_MODEL_USB_VT82C686B_UHCI:
+ case VIR_DOMAIN_CONTROLLER_MODEL_USB_PIIX3_UHCI:
+ case VIR_DOMAIN_CONTROLLER_MODEL_USB_PIIX4_UHCI:
+ case VIR_DOMAIN_CONTROLLER_MODEL_USB_PCI_OHCI:
+ return pciFlags;
+
+ case VIR_DOMAIN_CONTROLLER_MODEL_USB_QUSB1: /* xen only */
+ case VIR_DOMAIN_CONTROLLER_MODEL_USB_QUSB2: /* xen only */
+ case VIR_DOMAIN_CONTROLLER_MODEL_USB_NONE:
+ case VIR_DOMAIN_CONTROLLER_MODEL_USB_LAST:
+ /* should be 0 */
+ return pciFlags;
+ }
+
+ case VIR_DOMAIN_CONTROLLER_TYPE_IDE:
+ case VIR_DOMAIN_CONTROLLER_TYPE_SCSI:
+ case VIR_DOMAIN_CONTROLLER_TYPE_VIRTIO_SERIAL:
+ return pciFlags;
+
+ case VIR_DOMAIN_CONTROLLER_TYPE_FDC:
+ case VIR_DOMAIN_CONTROLLER_TYPE_CCID:
+ case VIR_DOMAIN_CONTROLLER_TYPE_LAST:
+ /* should be 0 */
+ return pciFlags;
+ }
+ }
+
+ case VIR_DOMAIN_DEVICE_FS:
+ /* the only type of filesystem so far is virtio-9p-pci */
+ return pciFlags;
+
+ case VIR_DOMAIN_DEVICE_NET: {
+ virDomainNetDefPtr net = dev->data.net;
+
+ /* NB: a type='hostdev' will use PCI, but its
+ * address is assigned when we're assigning the
+ * addresses for other hostdev devices.
+ */
+ if (net->type == VIR_DOMAIN_NET_TYPE_HOSTDEV ||
+ STREQ(net->model, "usb-net")) {
+ /* should be 0 */
+ return pciFlags;
+ }
+ return pciFlags;
+ }
+
+ case VIR_DOMAIN_DEVICE_SOUND:
+ switch ((virDomainSoundModel)dev->data.sound->model) {
+ case VIR_DOMAIN_SOUND_MODEL_ES1370:
+ case VIR_DOMAIN_SOUND_MODEL_AC97:
+ case VIR_DOMAIN_SOUND_MODEL_ICH6:
+ case VIR_DOMAIN_SOUND_MODEL_ICH9:
+ return pciFlags;
+
+ case VIR_DOMAIN_SOUND_MODEL_SB16:
+ case VIR_DOMAIN_SOUND_MODEL_PCSPK:
+ case VIR_DOMAIN_SOUND_MODEL_USB:
+ case VIR_DOMAIN_SOUND_MODEL_LAST:
+ /* should be 0 */
+ return pciFlags;
+ }
+
+ case VIR_DOMAIN_DEVICE_DISK:
+ switch ((virDomainDiskBus)dev->data.disk->bus) {
+ case VIR_DOMAIN_DISK_BUS_VIRTIO:
+ return pciFlags; /* only virtio disks use PCI */
+
+ case VIR_DOMAIN_DISK_BUS_IDE:
+ case VIR_DOMAIN_DISK_BUS_FDC:
+ case VIR_DOMAIN_DISK_BUS_SCSI:
+ case VIR_DOMAIN_DISK_BUS_XEN:
+ case VIR_DOMAIN_DISK_BUS_USB:
+ case VIR_DOMAIN_DISK_BUS_UML:
+ case VIR_DOMAIN_DISK_BUS_SATA:
+ case VIR_DOMAIN_DISK_BUS_SD:
+ case VIR_DOMAIN_DISK_BUS_LAST:
+ /* should be 0 */
+ return pciFlags;
+ }
+
+ case VIR_DOMAIN_DEVICE_HOSTDEV:
+ return pciFlags;
+
+ case VIR_DOMAIN_DEVICE_MEMBALLOON:
+ switch ((virDomainMemballoonModel)dev->data.memballoon->model) {
+ case VIR_DOMAIN_MEMBALLOON_MODEL_VIRTIO:
+ return pciFlags;
+
+ case VIR_DOMAIN_MEMBALLOON_MODEL_XEN:
+ case VIR_DOMAIN_MEMBALLOON_MODEL_NONE:
+ case VIR_DOMAIN_MEMBALLOON_MODEL_LAST:
+ /* should be 0 (not PCI) */
+ return pciFlags;
+ }
+
+ case VIR_DOMAIN_DEVICE_RNG:
+ switch ((virDomainRNGModel)dev->data.rng->model) {
+ case VIR_DOMAIN_RNG_MODEL_VIRTIO:
+ return pciFlags;
+
+ case VIR_DOMAIN_RNG_MODEL_LAST:
+ /* should be 0 */
+ return pciFlags;
+ }
+
+ case VIR_DOMAIN_DEVICE_WATCHDOG:
+ /* only one model connects using PCI */
+ switch ((virDomainWatchdogModel)dev->data.watchdog->model) {
+ case VIR_DOMAIN_WATCHDOG_MODEL_I6300ESB:
+ return pciFlags;
+
+ case VIR_DOMAIN_WATCHDOG_MODEL_IB700:
+ case VIR_DOMAIN_WATCHDOG_MODEL_DIAG288:
+ case VIR_DOMAIN_WATCHDOG_MODEL_LAST:
+ /* should be 0 */
+ return pciFlags;
+ }
+
+ case VIR_DOMAIN_DEVICE_VIDEO:
+ switch ((virDomainVideoType)dev->data.video->type) {
+ case VIR_DOMAIN_VIDEO_TYPE_VIRTIO:
+ case VIR_DOMAIN_VIDEO_TYPE_VGA:
+ case VIR_DOMAIN_VIDEO_TYPE_CIRRUS:
+ case VIR_DOMAIN_VIDEO_TYPE_VMVGA:
+ case VIR_DOMAIN_VIDEO_TYPE_XEN:
+ case VIR_DOMAIN_VIDEO_TYPE_VBOX:
+ case VIR_DOMAIN_VIDEO_TYPE_QXL:
+ case VIR_DOMAIN_VIDEO_TYPE_PARALLELS:
+ return pciFlags;
+
+ case VIR_DOMAIN_VIDEO_TYPE_LAST:
+ /* should be 0 */
+ return pciFlags;
+ }
+
+
+ case VIR_DOMAIN_DEVICE_SHMEM:
+ return pciFlags;
+
+ case VIR_DOMAIN_DEVICE_INPUT:
+ switch ((virDomainInputBus)dev->data.input->bus) {
+ case VIR_DOMAIN_INPUT_BUS_VIRTIO:
+ return pciFlags;
+
+ case VIR_DOMAIN_INPUT_BUS_PS2:
+ case VIR_DOMAIN_INPUT_BUS_USB:
+ case VIR_DOMAIN_INPUT_BUS_XEN:
+ case VIR_DOMAIN_INPUT_BUS_PARALLELS:
+ case VIR_DOMAIN_INPUT_BUS_LAST:
+ /* should be 0 */
+ return pciFlags;
+ }
+
+ case VIR_DOMAIN_DEVICE_CHR:
+ switch ((virDomainChrSerialTargetType)dev->data.chr->targetType) {
+ case VIR_DOMAIN_CHR_SERIAL_TARGET_TYPE_PCI:
+ return pciFlags;
+
+ case VIR_DOMAIN_CHR_SERIAL_TARGET_TYPE_ISA:
+ case VIR_DOMAIN_CHR_SERIAL_TARGET_TYPE_USB:
+ case VIR_DOMAIN_CHR_SERIAL_TARGET_TYPE_LAST:
+ /* should be 0 */
+ return pciFlags;
+ }
+
+ /* These devices don't ever connect with PCI */
+ case VIR_DOMAIN_DEVICE_NVRAM:
+ case VIR_DOMAIN_DEVICE_TPM:
+ case VIR_DOMAIN_DEVICE_PANIC:
+ case VIR_DOMAIN_DEVICE_MEMORY:
+ case VIR_DOMAIN_DEVICE_HUB:
+ case VIR_DOMAIN_DEVICE_REDIRDEV:
+ case VIR_DOMAIN_DEVICE_SMARTCARD:
+ /* These devices don't even have a DeviceInfo */
+ case VIR_DOMAIN_DEVICE_LEASE:
+ case VIR_DOMAIN_DEVICE_GRAPHICS:
+ case VIR_DOMAIN_DEVICE_IOMMU:
+ case VIR_DOMAIN_DEVICE_LAST:
+ case VIR_DOMAIN_DEVICE_NONE:
+ /* should be 0 */
+ return pciFlags;
+ }
+
+ /* We can never get here, because all cases are covered in the
+ * switch, and they all return, but the compiler will still
+ * complain "control reaches end of non-void function" unless
+ * we add the following return.
+ */
+ return 0;
+}
+
+
+typedef struct {
+ virDomainPCIConnectFlags virtioFlags;
+ virDomainPCIConnectFlags pcieFlags;
+} qemuDomainFillDevicePCIConnectFlagsIterData;
+
+/**
+ * qemuDomainFillDevicePCIConnectIterInit:
+ *
+ * Initialize the iterator data that is used when calling
+ * qemuDomainCalculateDevicePCIConnectFlags().
+ */
+static void
+qemuDomainFillDevicePCIConnectIterInit(virDomainDefPtr def,
+ virQEMUCapsPtr qemuCaps,
+ qemuDomainFillDevicePCIConnectFlagsIterData
*data)
+{
+ if (qemuDomainMachineHasPCIeRoot(def)) {
+ data->pcieFlags = (VIR_PCI_CONNECT_TYPE_PCIE_DEVICE |
+ VIR_PCI_CONNECT_HOTPLUGGABLE);
+ } else {
+ data->pcieFlags = (VIR_PCI_CONNECT_TYPE_PCI_DEVICE |
+ VIR_PCI_CONNECT_HOTPLUGGABLE);
+ }
+
+ if (virQEMUCapsGet(qemuCaps, QEMU_CAPS_VIRTIO_PCI_DISABLE_LEGACY)) {
+ data->virtioFlags = data->pcieFlags;
+ } else {
+ data->virtioFlags = (VIR_PCI_CONNECT_TYPE_PCI_DEVICE |
+ VIR_PCI_CONNECT_HOTPLUGGABLE);
+ }
+}
+
+
+/**
+ * qemuDomainFillDevicePCIConnectFlagsIter:
+ *
+ * @def: the entire DomainDef
+ * @dev: The device to be checked
+ * @info: virDomainDeviceInfo within the device
+ * @opaque: points to iterator data setup beforehand.
+ *
+ * A function with properly formatted arguments to be called by
+ * virDomainDeviceInfoIterate(). Sets the pciConnectFlags for a single
+ * device's info.
+ *
+ * Always returns 0 - there is no failure.
+ */
+static int
+qemuDomainFillDevicePCIConnectFlagsIter(virDomainDefPtr def ATTRIBUTE_UNUSED,
+ virDomainDeviceDefPtr dev,
+ virDomainDeviceInfoPtr info,
+ void *opaque)
+{
+ qemuDomainFillDevicePCIConnectFlagsIterData *data = opaque;
+
+ info->pciConnectFlags
+ = qemuDomainDeviceCalculatePCIConnectFlags(dev, data->pcieFlags,
+ data->virtioFlags);
+ return 0;
+}
+
+
+/**
+ * qemuDomainFillAllPCIConnectFlags:
+ *
+ * @def: the entire DomainDef
+ * @qemuCaps: as you'd expect
+ *
+ * Set the info->pciConnectFlags for all devices in the domain.
+ *
+ * Returns 0 on success or -1 on failure (the only possibility of
+ * failure would be some internal problem with
+ * virDomainDeviceInfoIterate())
+ */
+static int ATTRIBUTE_UNUSED
+qemuDomainFillAllPCIConnectFlags(virDomainDefPtr def,
+ virQEMUCapsPtr qemuCaps)
+{
+ qemuDomainFillDevicePCIConnectFlagsIterData data;
+
+ qemuDomainFillDevicePCIConnectIterInit(def, qemuCaps, &data);
+
+ return virDomainDeviceInfoIterate(def,
+ qemuDomainFillDevicePCIConnectFlagsIter,
+ &data);
+}
+
+
+/**
+ * qemuDomainFillDevicePCIConnectFlags:
+ *
+ * @def: the entire DomainDef
+ * @dev: The device to be checked
+ * @qemuCaps: as you'd expect
+ *
+ * Set the info->pciConnectFlags for a single device.
+ *
+ * No return value.
+ */
+static void ATTRIBUTE_UNUSED
+qemuDomainFillDevicePCIConnectFlags(virDomainDefPtr def,
+ virDomainDeviceDefPtr dev,
+ virQEMUCapsPtr qemuCaps)
+{
+ virDomainDeviceInfoPtr info = virDomainDeviceGetInfo(dev);
+
+ if (info) {
+ /* qemuDomainDeviceCalculatePCIConnectFlags() is called with
+ * the data setup in the ...IterData by ...IterInit() rather
+ * than setting the values directly here. It may seem like
+ * pointless posturing, but it's done this way to eliminate
+ * duplicated setup code while allowing more efficient
+ * operation when it's being done repeatedly with the device
+ * iterator (since qemuDomainFillAllPCIConnectFlags() only
+ * calls ...IterInit() once for all devices).
+ */
+ qemuDomainFillDevicePCIConnectFlagsIterData data;
+
+ qemuDomainFillDevicePCIConnectIterInit(def, qemuCaps, &data);
+
+ info->pciConnectFlags
+ = qemuDomainDeviceCalculatePCIConnectFlags(dev, data.pcieFlags,
+ data.virtioFlags);
+ }
+}
+
+
static int
qemuDomainPCIAddressReserveNextAddr(virDomainPCIAddressSetPtr addrs,
virDomainDeviceInfoPtr dev,
--
2.7.4