Hi all,

 

Please ignore my previous mail..

 

This is my test scenario

 

My test environment

Host os=rhel6.1

Guest os = rhel6.1

Libvirt=0.9.8

Kvm hypervisor

 

I am creating a macvtap interface on host machine at eth0 interface

#ip link show macvtap0

51: macvtap0@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UNKNOWN qlen 500

    link/ether 1e:aa:f7:43:7e:3d brd ff:ff:ff:ff:ff:ff

 

I have made this entry in guest xml file

 

<interface type='direct'>

      <mac address=1e:aa:f7:43:7e:3d’/>

      <source dev='eth0' mode='bridge'/>

      <model type='virtio'/>

      <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/>

    </interface>

 

Now when I start the guest

#virsh start guest

It gives following message

error: Failed to start domain guest

error: Cannot set interface flags on 'macvtap1': Device or resource busy

 

 

 

Please let me know what else we need to do to make macvtap work on kvm.

 

 

From: libvir-list-bounces@redhat.com [mailto:libvir-list-bounces@redhat.com] On Behalf Of Amit Tewari
Sent: Monday, December 12, 2011 3:22 PM
To: libvir-list@redhat.com
Subject: [libvirt] macvtap support in libvirt 0.9.8

 

Hi all,

 

My test environment

Host os=rhel6.1

Guest os = rhel6.1

Libvirt=0.9.8

Kvm hypervisor

 

I am creating a macvtap interface on host machine at eth0 interface

#ip link show macvtap0

51: macvtap0@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UNKNOWN qlen 500

    link/ether 1e:aa:f7:43:7e:3d brd ff:ff:ff:ff:ff:ff

 

I have made this entry in guest xml file

 

<interface type='direct'>

      <mac address=1e:aa:f7:43:7e:3d’/>

      <source dev='eth0' mode='bridge'/>

      <model type='virtio'/>

      <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/>

    </interface>

 

Now when I start the guest

#virsh start guest

It gives following message

“Bringing up interface eth0:  Device eth0 does not seem to be present, delaying initialization.

[FAILED]”

 

Guest eth interface does not create. what is the problem.

 

Please let me know what else we need to do to make macvtap work on kvm.


DISCLAIMER: 
----------------------------------------------------------------------------------------------------------------------- 
The contents of this e-mail and any attachment(s) are confidential and
intended 
for the named recipient(s) only.  
It shall not attach any liability on the originator or NECHCL or its 
affiliates. Any views or opinions presented in  
this email are solely those of the author and may not necessarily reflect the 
opinions of NECHCL or its affiliates.  
Any form of reproduction, dissemination, copying, disclosure, modification, 
distribution and / or publication of  
this message without the prior written consent of the author of this e-mail is 
strictly prohibited. If you have  
received this email in error please delete it and notify the sender 
immediately. . 
-----------------------------------------------------------------------------------------------------------------------

DISCLAIMER: 
----------------------------------------------------------------------------------------------------------------------- 
The contents of this e-mail and any attachment(s) are confidential and
intended 
for the named recipient(s) only.  
It shall not attach any liability on the originator or NECHCL or its 
affiliates. Any views or opinions presented in  
this email are solely those of the author and may not necessarily reflect the 
opinions of NECHCL or its affiliates.  
Any form of reproduction, dissemination, copying, disclosure, modification, 
distribution and / or publication of  
this message without the prior written consent of the author of this e-mail is 
strictly prohibited. If you have  
received this email in error please delete it and notify the sender 
immediately. . 
-----------------------------------------------------------------------------------------------------------------------