[libvirt] [qemu PATCH] docs/interop: add "firmware.json"

Add a schema that describes the different uses and properties of virtual machine firmware. Each firmware executable installed on a host system should come with at least one JSON file that conforms to this schema. Each file informs the management applications about - the firmware's properties and one possible use case / feature set, - configuration bits that are required to run the firmware binary. In addition, define rules for management apps for picking the highest priority firmware JSON file when multiple such files match the search criteria. Cc: "Daniel P. Berrange" <berrange(a)redhat.com&gt; Cc: David Gibson <dgibson(a)redhat.com&gt; Cc: Eric Blake <eblake(a)redhat.com&gt; Cc: Gerd Hoffmann <kraxel(a)redhat.com&gt; Cc: Kashyap Chamarthy <kchamart(a)redhat.com&gt; Cc: Markus Armbruster <armbru(a)redhat.com&gt; Cc: Paolo Bonzini <pbonzini(a)redhat.com&gt; Cc: Thomas Huth <thuth(a)redhat.com&gt; Signed-off-by: Laszlo Ersek <lersek(a)redhat.com&gt; --- Notes: PATCH: - previous version (RFCv3) was posted at: <http://mid.mail-archive.com/20180420231246.23130-4-lersek@redhat.com> - move "firmware.json" under docs/interop/; drop earlier development artifacts - no changes to the schema (received no comments on RFCv3) RFCv3: - Previous version (RFCv2) was posted at: <http://mid.mail-archive.com/20180417224054.26363-1-lersek@redhat.com> - Trim the CC list a little. - Wrap to a 72-char margin, for an easier reading. [Markus] - Run spell-checker. [Markus] - Rename @FirmwareType to @FirmwareOSInterface, to better express the concept. Update the enum constants accordingly (incl. documentation); in particular replace @slof with @openfirmware. Rename the @type field in @Firmware to @interface-type. [David, Gerd, Paolo, Thomas] - Better yet, rename @interface-type to @interface-types (plural), and turn it into a list of @FirmwareOSInterface entries, to express an ordered compat list with multiple firmware<->OS interface types. [Dan, Eric, Gerd, Paolo] - Drop @FirmwareArchitecture, and switch the type of @FirmwareTarget.@architecture to @SysEmuTarget (now defined in "common.json"). [Dan, Gerd, Markus] - Switch elements of @FirmwareTarget.@machines from aliases ("pc", "q35", "virt") to concrete machine types, with glob patterns understood. [Dan, Gerd] - Rename @secure-boot-enrolled-keys to @enrolled-keys, and drop the dependency on @secure-boot in its documentation. [Gerd] - Describe the firmware JSON directories and the search rules to management apps, under the @Firmware element. Relatedly, remove the language on any concrete certificates under @enrolled-keys, as these can be customized through the overrides. Also refresh the commit message. [Dan, Gerd] - Rename @pathname fields to @filename. [Markus] - Don't replace &quot;@executable.(a)filename&quot; with &quot;(a)executable.filename&quot; (that is, keep the second @ sign), because removing the 2nd @ sign messes up the documentation ("filename" stops being type-set in monospace in the HTML, for example). [Markus] - Rename @nvram_template to @nvram-template. [Thomas] - Keep @x-check-firmware for a while longer. [Dan, Gerd, Markus, Paolo] RFCv2: - previous version (RFCv1) was posted at <http://mid.mail-archive.com/20180407000117.25640-1-lersek@redhat.com> - v2 is basically a rewrite from scratch, starting out with Dan's definitions from <http://mid.mail-archive.com/20180410102033.GL5155@redhat.com> and <http://mid.mail-archive.com/20180410110357.GP5155@redhat.com>;, hopefully addressing others' feedback as well RFCv1: - Folks on the CC list, please try to see if the suggested schema is flexible enough to describe the virtual firmware(s) that you are familiar with. Thanks! docs/interop/firmware.json | 554 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 554 insertions(+) create mode 100644 docs/interop/firmware.json diff --git a/docs/interop/firmware.json b/docs/interop/firmware.json new file mode 100644 index 000000000000..2add6fd8afe7 --- /dev/null +++ b/docs/interop/firmware.json @@ -0,0 +1,554 @@ +# -*- Mode: Python -*- +# +# Copyright (C) 2018 Red Hat, Inc. +# +# Authors: +# Daniel P. Berrange <berrange(a)redhat.com&gt; +# Laszlo Ersek <lersek(a)redhat.com&gt; +# +# This work is licensed under the terms of the GNU GPL, version 2 or +# later. See the COPYING file in the top-level directory. + +## +# = Firmware +## + +{ 'include' : 'common.json' } +{ 'include' : 'block-core.json' } + +## +# @FirmwareOSInterface: +# +# Lists the firmware-OS interface types provided by various firmware +# that is commonly used with QEMU virtual machines. +# +# @bios: Traditional x86 BIOS interface. For example, firmware built +# from the SeaBIOS project usually provides this interface. +# +# @openfirmware: The interface is defined by the (historical) IEEE +# 1275-1994 standard. Examples for firmware projects that +# provide this interface are: OpenBIOS, OpenHackWare, +# SLOF. +# +# @uboot: Firmware interface defined by the U-Boot project. +# +# @uefi: Firmware interface defined by the UEFI specification. For +# example, firmware built from the edk2 (EFI Development Kit II) +# project usually provides this interface. +# +# Since: 2.13 +## +{ 'enum' : 'FirmwareOSInterface', + 'data' : [ 'bios', 'openfirmware', 'uboot', 'uefi' ] } + +## +# @FirmwareDevice: +# +# Defines the device types that firmware can be mapped into. +# +# @flash: The firmware executable and its accompanying NVRAM file are to +# be mapped into a pflash chip each. +# +# @kernel: The firmware is to be loaded like a Linux kernel. This is +# similar to @memory but may imply additional processing that +# is specific to the target architecture and machine type. +# +# @memory: The firmware is to be mapped into memory. +# +# Since: 2.13 +## +{ 'enum' : 'FirmwareDevice', + 'data' : [ 'flash', 'kernel', 'memory' ] } + +## +# @FirmwareTarget: +# +# Defines the machine types that firmware may execute on. +# +# @architecture: Determines the emulation target (the QEMU system +# emulator) that can execute the firmware. +# +# @machines: Lists the machine types (known by the emulator that is +# specified through @architecture) that can execute the +# firmware. Elements of @machines are supposed to be concrete +# machine types, not aliases. Glob patterns are understood, +# which is especially useful for versioned machine types. +# (For example, the glob pattern "pc-i440fx-*" matches +# "pc-i440fx-2.12".) On the QEMU command line, "-machine +# type=..." specifies the requested machine type (but that +# option does not accept glob patterns). +# +# Since: 2.13 +## +{ 'struct' : 'FirmwareTarget', + 'data' : { 'architecture' : 'SysEmuTarget', + 'machines' : [ 'str' ] } } + +## +# @FirmwareFeature: +# +# Defines the features that firmware may support, and the platform +# requirements that firmware may present. +# +# @acpi-s3: The firmware supports S3 sleep (suspend to RAM), as defined +# in the ACPI specification. On the "pc-i440fx-*" machine +# types of the @i386 and @x86_64 emulation targets, S3 can be +# enabled with "-global PIIX4_PM.disable_s3=0" and disabled +# with "-global PIIX4_PM.disable_s3=1". On the "pc-q35-*" +# machine types of the @i386 and @x86_64 emulation targets, S3 +# can be enabled with "-global ICH9-LPC.disable_s3=0" and +# disabled with "-global ICH9-LPC.disable_s3=1". +# +# @acpi-s4: The firmware supports S4 hibernation (suspend to disk), as +# defined in the ACPI specification. On the "pc-i440fx-*" +# machine types of the @i386 and @x86_64 emulation targets, S4 +# can be enabled with "-global PIIX4_PM.disable_s4=0" and +# disabled with "-global PIIX4_PM.disable_s4=1". On the +# "pc-q35-*" machine types of the @i386 and @x86_64 emulation +# targets, S4 can be enabled with "-global +# ICH9-LPC.disable_s4=0" and disabled with "-global +# ICH9-LPC.disable_s4=1". +# +# @amd-sev: The firmware supports running under AMD Secure Encrypted +# Virtualization, as specified in the AMD64 Architecture +# Programmer's Manual. QEMU command line options related to +# this feature are documented in +# "docs/amd-memory-encryption.txt". +# +# @enrolled-keys: The variable store (NVRAM) template associated with +# the firmware binary has the UEFI Secure Boot +# operational mode turned on, with certificates +# enrolled. +# +# @requires-smm: The firmware requires the platform to emulate SMM +# (System Management Mode), as defined in the AMD64 +# Architecture Programmer's Manual, and in the Intel(R)64 +# and IA-32 Architectures Software Developer's Manual. On +# the "pc-q35-*" machine types of the @i386 and @x86_64 +# emulation targets, SMM emulation can be enabled with +# "-machine smm=on". (On the "pc-q35-*" machine types of +# the @i386 emulation target, @requires-smm presents +# further CPU requirements; one combination known to work +# is "-cpu coreduo,-nx".) If the firmware is marked as +# both @secure-boot and @requires-smm, then write +# accesses to the pflash chip (NVRAM) that holds the UEFI +# variable store must be restricted to code that executes +# in SMM, using the additional option "-global +# driver=cfi.pflash01,property=secure,value=on". +# Furthermore, a large guest-physical address space +# (comprising guest RAM, memory hotplug range, and 64-bit +# PCI MMIO aperture), and/or a high VCPU count, may +# present high SMRAM requirements from the firmware. On +# the "pc-q35-*" machine types of the @i386 and @x86_64 +# emulation targets, the SMRAM size may be increased +# above the default 16MB with the "-global +# mch.extended-tseg-mbytes=uint16" option. As a rule of +# thumb, the default 16MB size suffices for 1TB of +# guest-phys address space and a few tens of VCPUs; for +# every further TB of guest-phys address space, add 8MB +# of SMRAM. 48MB should suffice for 4TB of guest-phys +# address space and 2-3 hundred VCPUs. +# +# @secure-boot: The firmware implements the software interfaces for UEFI +# Secure Boot, as defined in the UEFI specification. Note +# that without @requires-smm, guest code running with +# kernel privileges can undermine the security of Secure +# Boot. +# +# @verbose-dynamic: When firmware log capture is enabled, the firmware +# logs a large amount of debug messages, which may +# impact boot performance. With log capture disabled, +# there is no boot performance impact. On the +# "pc-i440fx-*" and "pc-q35-*" machine types of the +# @i386 and @x86_64 emulation targets, firmware log +# capture can be enabled with the QEMU command line +# options "-chardev file,id=fwdebug,path=LOGFILEPATH +# -device isa-debugcon,iobase=0x402,chardev=fwdebug". +# @verbose-dynamic is mutually exclusive with +# @verbose-static. +# +# @verbose-static: The firmware unconditionally produces a large amount +# of debug messages, which may impact boot performance. +# This feature may typically be carried by certain UEFI +# firmware for the "virt-*" machine types of the @arm +# and @aarch64 emulation targets, where the debug +# messages are written to the first (always present) +# PL011 UART. @verbose-static is mutually exclusive +# with @verbose-dynamic. +# +# Since: 2.13 +## +{ 'enum' : 'FirmwareFeature', + 'data' : [ 'acpi-s3', 'acpi-s4', 'amd-sev', 'enrolled-keys', + 'requires-smm', 'secure-boot', 'verbose-dynamic', + 'verbose-static' ] } + +## +# @FirmwareFlashFile: +# +# Defines common properties that are necessary for loading a firmware +# file into a pflash chip. The corresponding QEMU command line option is +# "-drive file=@filename,format=@format". Note however that the +# option-argument shown here is incomplete; it is completed under +# @FirmwareMappingFlash. +# +# @filename: Specifies the filename on the host filesystem where the +# firmware file can be found. +# +# @format: Specifies the block format of the file pointed-to by +# @filename, such as @raw or @qcow2. +# +# Since: 2.13 +## +{ 'struct' : 'FirmwareFlashFile', + 'data' : { 'filename' : 'str', + 'format' : 'BlockdevDriver' } } + +## +# @FirmwareMappingFlash: +# +# Describes loading and mapping properties for the firmware executable +# and its accompanying NVRAM file, when @FirmwareDevice is @flash. +# +# @executable: Identifies the firmware executable. The firmware +# executable may be shared by multiple virtual machine +# definitions. The corresponding QEMU command line option +# is "-drive +# if=pflash,unit=0,readonly=on,file=@executable.@filename,format=@executable.(a)format&quot;. +# +# @nvram-template: Identifies the NVRAM template compatible with +# @executable. Management software instantiates an +# individual copy -- a specific NVRAM file -- from +# @nvram-template.@filename for each new virtual +# machine definition created. @nvram-template.@filename +# itself is never mapped into virtual machines, only +# individual copies of it are. An NVRAM file is +# typically used for persistently storing the +# non-volatile UEFI variables of a virtual machine +# definition. The corresponding QEMU command line +# option is "-drive +# if=pflash,unit=1,readonly=off,file=FILENAME_OF_PRIVATE_NVRAM_FILE,format=@nvram-template.(a)format&quot;. +# +# Since: 2.13 +## +{ 'struct' : 'FirmwareMappingFlash', + 'data' : { 'executable' : 'FirmwareFlashFile', + 'nvram-template' : 'FirmwareFlashFile' } } + +## +# @FirmwareMappingKernel: +# +# Describes loading and mapping properties for the firmware executable, +# when @FirmwareDevice is @kernel. +# +# @filename: Identifies the firmware executable. The firmware executable +# may be shared by multiple virtual machine definitions. The +# corresponding QEMU command line option is "-kernel +# @filename". +# +# Since: 2.13 +## +{ 'struct' : 'FirmwareMappingKernel', + 'data' : { 'filename' : 'str' } } + +## +# @FirmwareMappingMemory: +# +# Describes loading and mapping properties for the firmware executable, +# when @FirmwareDevice is @memory. +# +# @filename: Identifies the firmware executable. The firmware executable +# may be shared by multiple virtual machine definitions. The +# corresponding QEMU command line option is "-bios +# @filename". +# +# Since: 2.13 +## +{ 'struct' : 'FirmwareMappingMemory', + 'data' : { 'filename' : 'str' } } + +## +# @FirmwareMapping: +# +# Provides a discriminated structure for firmware to describe its +# loading / mapping properties. +# +# @device: Selects the device type that the firmware must be mapped +# into. +# +# Since: 2.13 +## +{ 'union' : 'FirmwareMapping', + 'base' : { 'device' : 'FirmwareDevice' }, + 'discriminator' : 'device', + 'data' : { 'flash' : 'FirmwareMappingFlash', + 'kernel' : 'FirmwareMappingKernel', + 'memory' : 'FirmwareMappingMemory' } } + +## +# @Firmware: +# +# Describes a firmware (or a firmware use case) to management software. +# +# It is possible for multiple @Firmware elements to match the search +# criteria of management software. Applications thus need rules to pick +# one of the many matches, and users need the ability to override distro +# defaults. +# +# It is recommended to create firmware JSON files (each containing a +# single @Firmware root element) with a double-digit prefix, for example +# "50-ovmf.json", "50-seabios-256k.json", etc, so they can be sorted in +# predictable order. The firmware JSON files should be searched for in +# three directories: +# +# - /usr/share/qemu/firmware -- populated by distro-provided firmware +# packages (XDG_DATA_DIRS covers +# /usr/share by default), +# +# - /etc/qemu/firmware -- exclusively for sysadmins' local additions, +# +# - $XDG_CONFIG_HOME/qemu/firmware -- exclusively for per-user local +# additions (XDG_CONFIG_HOME +# defaults to $HOME/.config). +# +# Top-down, the list of directories goes from general to specific. +# +# Management software should build a list of files from all three +# locations, then sort the list by filename (i.e., last pathname +# component). Management software should choose the first JSON file on +# the sorted list that matches the search criteria. If a more specific +# directory has a file with same name as a less specific directory, then +# the file in the more specific directory takes effect. If the more +# specific file is zero length, it hides the less specific one. +# +# For example, if a distro ships +# +# - /usr/share/qemu/firmware/50-ovmf.json +# +# - /usr/share/qemu/firmware/50-seabios-256k.json +# +# then the sysadmin can prevent the default OVMF being used at all with +# +# $ touch /etc/qemu/firmware/50-ovmf.json +# +# The sysadmin can replace/alter the distro default OVMF with +# +# $ vim /etc/qemu/firmware/50-ovmf.json +# +# or they can provide a parallel OVMF with higher priority +# +# $ vim /etc/qemu/firmware/10-ovmf.json +# +# or they can provide a parallel OVMF with lower priority +# +# $ vim /etc/qemu/firmware/99-ovmf.json +# +# @description: Provides a human-readable description of the firmware. +# Management software may or may not display @description. +# +# @interface-types: Lists the types of interfaces that the firmware can +# expose to the guest OS. This is a non-empty, ordered +# list; entries near the beginning of @interface-types +# are considered more native to the firmware, and/or +# to have a higher quality implementation in the +# firmware, than entries near the end of +# @interface-types. +# +# @mapping: Describes the loading / mapping properties of the firmware. +# +# @targets: Collects the target architectures (QEMU system emulators) +# and their machine types that may execute the firmware. +# +# @features: Lists the features that the firmware supports, and the +# platform requirements it presents. +# +# @tags: A list of auxiliary strings associated with the firmware for +# which @description is not appropriate, due to the latter's +# possible exposure to the end-user. @tags serves development and +# debugging purposes only, and management software shall +# explicitly ignore it. +# +# Since: 2.13 +# +# Examples: +# +# { +# "description": "SeaBIOS", +# "interface-types": [ +# "bios" +# ], +# "mapping": { +# "device": "memory", +# "filename": "/usr/share/seabios/bios-256k.bin" +# }, +# "targets": [ +# { +# "architecture": "i386", +# "machines": [ +# "pc-i440fx-*", +# "pc-q35-*" +# ] +# }, +# { +# "architecture": "x86_64", +# "machines": [ +# "pc-i440fx-*", +# "pc-q35-*" +# ] +# } +# ], +# "features": [ +# "acpi-s3", +# "acpi-s4" +# ], +# "tags": [ +# "CONFIG_BOOTSPLASH=n", +# "CONFIG_ROM_SIZE=256", +# "CONFIG_USE_SMM=n" +# ] +# } +# +# { +# "description": "OVMF with SB+SMM, empty varstore", +# "interface-types": [ +# "uefi" +# ], +# "mapping": { +# "device": "flash", +# "executable": { +# "filename": "/usr/share/OVMF/OVMF_CODE.secboot.fd", +# "format": "raw" +# }, +# "nvram-template": { +# "filename": "/usr/share/OVMF/OVMF_VARS.fd", +# "format": "raw" +# } +# }, +# "targets": [ +# { +# "architecture": "x86_64", +# "machines": [ +# "pc-q35-*" +# ] +# } +# ], +# "features": [ +# "acpi-s3", +# "amd-sev", +# "requires-smm", +# "secure-boot", +# "verbose-dynamic" +# ], +# "tags": [ +# "-a IA32", +# "-a X64", +# "-p OvmfPkg/OvmfPkgIa32X64.dsc", +# "-t GCC48", +# "-b DEBUG", +# "-D SMM_REQUIRE", +# "-D SECURE_BOOT_ENABLE", +# "-D FD_SIZE_4MB" +# ] +# } +# +# { +# "description": "OVMF with SB+SMM, SB enabled, MS certs enrolled", +# "interface-types": [ +# "uefi" +# ], +# "mapping": { +# "device": "flash", +# "executable": { +# "filename": "/usr/share/OVMF/OVMF_CODE.secboot.fd", +# "format": "raw" +# }, +# "nvram-template": { +# "filename": "/usr/share/OVMF/OVMF_VARS.secboot.fd", +# "format": "raw" +# } +# }, +# "targets": [ +# { +# "architecture": "x86_64", +# "machines": [ +# "pc-q35-*" +# ] +# } +# ], +# "features": [ +# "acpi-s3", +# "amd-sev", +# "enrolled-keys", +# "requires-smm", +# "secure-boot", +# "verbose-dynamic" +# ], +# "tags": [ +# "-a IA32", +# "-a X64", +# "-p OvmfPkg/OvmfPkgIa32X64.dsc", +# "-t GCC48", +# "-b DEBUG", +# "-D SMM_REQUIRE", +# "-D SECURE_BOOT_ENABLE", +# "-D FD_SIZE_4MB" +# ] +# } +# +# { +# "description": "UEFI firmware for ARM64 virtual machines", +# "interface-types": [ +# "uefi" +# ], +# "mapping": { +# "device": "flash", +# "executable": { +# "filename": "/usr/share/AAVMF/AAVMF_CODE.fd", +# "format": "raw" +# }, +# "nvram-template": { +# "filename": "/usr/share/AAVMF/AAVMF_VARS.fd", +# "format": "raw" +# } +# }, +# "targets": [ +# { +# "architecture": "aarch64", +# "machines": [ +# "virt-*" +# ] +# } +# ], +# "features": [ +# +# ], +# "tags": [ +# "-a AARCH64", +# "-p ArmVirtPkg/ArmVirtQemu.dsc", +# "-t GCC48", +# "-b DEBUG", +# "-D DEBUG_PRINT_ERROR_LEVEL=0x80000000" +# ] +# } +## +{ 'struct' : 'Firmware', + 'data' : { 'description' : 'str', + 'interface-types' : [ 'FirmwareOSInterface' ], + 'mapping' : 'FirmwareMapping', + 'targets' : [ 'FirmwareTarget' ], + 'features' : [ 'FirmwareFeature' ], + 'tags' : [ 'str' ] } } + +## +# @x-check-firmware: +# +# Accept a @Firmware object and do nothing, successfully. This command +# can be used in the QMP shell to validate @Firmware JSON against the +# schema. +# +# @fw: ignored +# +# Since: 2.13 +## +{ 'command' : 'x-check-firmware', + 'data' : { 'fw' : 'Firmware' } } -- 2.14.1.3.gb7cf6e02401b