6:42 a.m.
Snapshot deletion is implemented as a three-phase process - first we
collect specifications of blockcommits used to perform the deletion and
run sanity checks to verify that the whole operation is reasonably safe,
then we launch the blockcommits and finally we wait for them to finish and
check the results.
This commit implements the first phase. All information necessary to
launch and finish a blockcommit job per disk included in the snapshot is
collected in a blockcommit descriptor structure and checked to verify the
job makes sense and has a reasonable chance to succeed. Broadly speaking,
the checks aim to ensure that the disks in the current running VM are the
same as they were when the snapshot was created.
Signed-off-by: Pavel Mores <pmores(a)redhat.com>
---
src/qemu/qemu_driver.c | 154 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 154 insertions(+)
diff --git a/src/qemu/qemu_driver.c b/src/qemu/qemu_driver.c
index 6ffd53503b..dc1176bd9c 100644
--- a/src/qemu/qemu_driver.c
+++ b/src/qemu/qemu_driver.c
@@ -16752,6 +16752,160 @@ qemuDomainMomentReparentChildren(void *payload,
}
+/* Blockcommit operation descriptor. Holds data required to launch and
+ * conclude an individual blockcommit job. Generic parameters
+ * (virDomainObjPtr, virQEMUDriverPtr) are not stored as they are assumed to be
+ * available at the point of blockcommit invocation. */
+
+typedef struct {
+ virDomainDiskDefPtr disk;
+ virStorageSourcePtr baseSource;
+ virStorageSourcePtr topSource;
+ virStorageSourcePtr topParentSource;
+ int blockCommitFlags;
+ bool isActive; /* used to find out if pivot is needed to finish the job */
+} virBlockCommitDesc;
+
+/* Transforms a snapshot into an array of descriptors of blockcommit jobs
+ * required to delete the snapshot, one descriptor per affected disk. Also
+ * runs sanity checks for each affected disk and each individual job to make
+ * sure the deletion is safe to perform. Returns NULL if safety cannot be
+ * guaranteed.
+ *
+ * (A snapshot is considered safe to delete if, loosely speaking, we can be
+ * reasonably sure that all disks it touches are still those that were there
+ * when the snapshot was created. For instance, a different disk might be
+ * attached to the VM under the same target name, or a disk included in the
+ * snapshot might be reattached to the VM under a different target name. If
+ * any such thing happens between the times of snapshot creation and deletion,
+ * that shapshot would not be considered safe to delete.) */
+
+static virBlockCommitDesc *
+qemuDomainSnapshotDeleteExternalGetJobDescriptors(virDomainObjPtr vm,
+ virDomainMomentObjPtr snap,
+ unsigned int flags)
+{
+ size_t i;
+ bool isActive;
+ virDomainSnapshotDefPtr snapdef = virDomainSnapshotObjGetDef(snap);
+ virDomainMomentObjPtr parent = snap->parent;
+ virDomainSnapshotDefPtr parentdef = virDomainSnapshotObjGetDef(parent);
+ g_autofree virBlockCommitDesc *blockCommitDescs = g_new(virBlockCommitDesc,
snapdef->ndisks);
+ int blockCommitFlags = VIR_DOMAIN_BLOCK_COMMIT_DELETE;
+
+ if (flags & (VIR_DOMAIN_SNAPSHOT_DELETE_CHILDREN |
+ VIR_DOMAIN_SNAPSHOT_DELETE_CHILDREN_ONLY)) {
+ isActive = true;
+ } else {
+ isActive = snap == virDomainSnapshotGetCurrent(vm->snapshots);
+ }
+
+ if (isActive)
+ blockCommitFlags |= VIR_DOMAIN_BLOCK_COMMIT_ACTIVE;
+
+ for (i = 0; i < snapdef->ndisks; i++) {
+ virDomainSnapshotDiskDefPtr snapDisk = &(snapdef->disks[i]);
+ const char *diskName = snapDisk->name;
+ virStorageSourcePtr baseSource = NULL;
+ virStorageSourcePtr topSource = NULL;
+ virStorageSourcePtr topParentSource = NULL;
+ virDomainDiskDefPtr domDiskNow;
+ virDomainDiskDefPtr domDiskThen = virDomainDiskByTarget(snapdef->parent.dom,
diskName);
+ virStorageSourcePtr snapSource = NULL;
+ virStorageSourcePtr snapParentSource = NULL;
+ unsigned int snapIndex;
+
+ if (!(domDiskNow = qemuDomainDiskByName(vm->def, diskName))) {
+ virReportError(VIR_ERR_OPERATION_INVALID,
+ _("can't delete %s, disk '%s' not found in
running VM"),
+ snapdef->parent.name, diskName);
+ return NULL;
+ }
+ if (snapDisk->src->type != VIR_STORAGE_TYPE_FILE ||
+ domDiskNow->src->type != VIR_STORAGE_TYPE_FILE) {
+ virReportError(VIR_ERR_OPERATION_UNSUPPORTED,
+ _("can't delete %s, only storage type 'file'
is supported"),
+ snapdef->parent.name);
+ return NULL;
+ }
+
+ /* TODO Apr 24, 2020: this is not great long-term as it still looks up
+ * essentially just by path (or target[index]), far from a full
+ * comparison operator for virStorageSources */
+ if (virStorageFileParseChainIndex(domDiskNow->dst, snapDisk->src->path,
&snapIndex) < 0 ||
+ !(snapSource = virStorageFileChainLookup(domDiskNow->src, NULL,
+ snapDisk->src->path,
snapIndex,
+ &snapParentSource)))
+ return NULL;
+
+ if (flags & VIR_DOMAIN_SNAPSHOT_DELETE_CHILDREN_ONLY) {
+ baseSource = snapSource;
+ } else {
+ if (parentdef == NULL) {
+ baseSource = virStorageFileChainLookup(domDiskNow->src, NULL, NULL, 0,
NULL);
+ if (!baseSource)
+ return NULL;
+ } else {
+ baseSource = snapSource->backingStore;
+ }
+ }
+
+ if (flags & (VIR_DOMAIN_SNAPSHOT_DELETE_CHILDREN |
VIR_DOMAIN_SNAPSHOT_DELETE_CHILDREN_ONLY)) {
+ topSource = domDiskNow->src;
+ } else {
+ topSource = snapSource;
+ topParentSource = snapParentSource;
+ }
+
+ if (topSource == NULL) {
+ virReportError(VIR_ERR_OPERATION_INVALID,
+ _("can't delete %s, couldn't find top (TODO
improve this message)"),
+ snapdef->parent.name);
+ return NULL;
+ }
+
+ if (baseSource == NULL) {
+ virReportError(VIR_ERR_OPERATION_INVALID,
+ _("can't delete %s, couldn't find base (TODO
improve this message)"),
+ snapdef->parent.name);
+ return NULL;
+ }
+
+ /* Check if the disk called 'diskName' is the same as it was at the
+ * point 'snap' was created. This is more of a heuristic test as
+ * virStorageSources don't seem to be well equipped for establishing
+ * identity. The idea is based on the assumption that snapshots can
+ * only be removed mid-chain, not added. If that holds, the currently
+ * running chain has to be the same as it was when 'snap' was created
+ * *minus* the snapshots that were deleted in the meantime, if any. In
+ * other words, the chain back at the time of 'snap's creation has to
+ * be an ordered superset of the currently running disk's chain. */
+ virStorageSourcePtr chainNow = snapSource->backingStore;
+ virStorageSourcePtr chainThen = NULL;
+ for (; virStorageSourceIsBacking(chainNow); chainNow = chainNow->backingStore)
{
+ chainThen = virStorageFileChainLookup(domDiskThen->src,
+ chainThen, chainNow->path, 0,
NULL);
+ if (!chainThen) {
+ virReportError(VIR_ERR_OPERATION_INVALID,
+ _("can't delete %s, disk '%s' doesn't
seem the same as when it was created (%s is in %s's backing chain now but it
wasn't when the snapshot was created)"),
+ snapdef->parent.name, diskName, chainNow->path,
+ snapdef->parent.name);
+ return NULL;
+ }
+ }
+
+ blockCommitDescs[i].disk = domDiskNow;
+ blockCommitDescs[i].baseSource = baseSource;
+ blockCommitDescs[i].topSource = topSource;
+ blockCommitDescs[i].topParentSource = topParentSource;
+ blockCommitDescs[i].blockCommitFlags = blockCommitFlags;
+ blockCommitDescs[i].isActive = isActive;
+ }
+
+ return g_steal_pointer(&blockCommitDescs);
+}
+
+
static int
qemuDomainSnapshotDelete(virDomainSnapshotPtr snapshot,
unsigned int flags)
--
2.24.1