7:23 a.m.
v3: Add skip for block_pull not implemented
v2: Add skip block for qemu only and 120s timeout for test
v1: Add tests for block job lifecyle and the test flow is as follows:
create 50M qed img with qed backing img->
block pull->abort block job->resume block pull->set block job speed->
wait to finish
---
scripts/qemu/300-blockjob-lifecycle.t | 146 +++++++++++++++++++++++++++++++++
1 files changed, 146 insertions(+), 0 deletions(-)
create mode 100644 scripts/qemu/300-blockjob-lifecycle.t
diff --git a/scripts/qemu/300-blockjob-lifecycle.t
b/scripts/qemu/300-blockjob-lifecycle.t
new file mode 100644
index 0000000..e43dfe2
--- /dev/null
+++ b/scripts/qemu/300-blockjob-lifecycle.t
@@ -0,0 +1,146 @@
+# -*- perl -*-
+#
+# Copyright (C) 2011-2012 Red Hat, Inc.
+# Copyright (C) 2011 Xiaoqiang Hu <xhu redhat com>
+#
+# This program is free software; You can redistribute it and/or modify
+# it under the GNU General Public License as published by the Free
+# Software Foundation; either version 2, or (at your option) any
+# later version
+#
+# The file "LICENSE" distributed along with this file provides full
+# details of the terms and conditions
+#
+
+=pod
+
+=head1 NAME
+
+qemu/300-blockjob-lifecycle.t - verify the lifecycle of block job:
+block pull, set block job speed, get block job info and abort block job
+
+=head1 DESCRIPTION
+
+The test case validates that it is possible to block pull, set block job
+speed, get block job info and abort block job for domain using qed img
+with qed backing img
+
+=cut
+
+use strict;
+use warnings;
+
+use Test::More tests => 16;
+
+use Sys::Virt::TCK;
+use Test::Exception;
+use File::Spec::Functions qw(catfile);
+use File::stat;
+
+my $tck = Sys::Virt::TCK->new();
+my $conn = eval { $tck->setup(); };
+BAIL_OUT "failed to setup test harness: $@" if $@;
+END {
+ $tck->cleanup if $tck;
+}
+
+SKIP:{
+ skip "Only relevant to QEMU driver", 16 unless $conn->get_type() eq
"QEMU";
+ my $xml = $tck->generic_pool("dir")
+ ->mode("0755")->as_xml;
+
+ diag "Defining transient storage pool $xml";
+ my $pool;
+
+ ok_pool(sub { $pool = $conn->define_storage_pool($xml) }, "define transient
storage pool");
+ lives_ok(sub { $pool->build(0) }, "built storage pool");
+ lives_ok(sub { $pool->create }, "started storage pool");
+
+ my $volbackxml = $tck->generic_volume("tck-back", "qed",
1024*1024*50)->allocation(0)->as_xml;
+
+ my ($volback, $pathback);
+ diag "back $volbackxml";
+ ok_volume(sub { $volback = $pool->create_volume($volbackxml) }, "create qed
backing file volume");
+
+ my $st;
+ $pathback = xpath($volback, "string(/volume/target/path)");
+ $st = stat($pathback);
+
+ ok($st, "path $pathback exists");
+
+ ok($st->size < 1024*1024, "size is < 1M");
+
+ my $volmainxml = $tck->generic_volume("tck-main", "qed",
1024*1024*50)
+ ->backing_file($pathback)
+ ->backing_format("qed")
+ ->allocation(0)->as_xml;
+
+ my ($volmain, $pathmain);
+ diag "main $volmainxml";
+ ok_volume(sub { $volmain = $pool->create_volume($volmainxml) }, "create qed
backing file volume");
+
+ $pathmain = xpath($volmain, "string(/volume/target/path)");
+ $st = stat($pathmain);
+
+ ok($st, "path $pathmain exists");
+
+ ok($st->size < 1024*1024, "size is < 1M");
+
+ # define the guest at a qed image
+ # and the backing store in this qed image.
+ $xml = $tck->generic_domain("tck")
+ ->disk(format => { name => "qemu", type => "qed"
},
+ type => "file",
+ src => $pathmain,
+ dst => "vdb")
+ ->as_xml;
+
+ diag "Defining an inactive domain config $xml";
+ my $dom;
+ ok_domain(sub { $dom = $conn->define_domain($xml) }, "defined persistent
domain config");
+
+ diag "Starting inactive domain config";
+ $dom->create;
+ ok($dom->get_id() > 0, "running domain has an ID > 0");
+
+ # start to block pull and bandwidth is 1MB/S
+ my ($bandwidth, $flags, $jobinfo, $timeout);
+ # 1MB/S
+ $bandwidth = 1;
+ $flags=0;
+ eval { $dom->block_pull($pathmain, $bandwidth, $flags); };
+ SKIP: {
+ skip "block_pull not implemented", 5 if $@ && $@->code() ==
55;
+
+ # $jobinfo is a hash reference summarising the execution state of the block job
+ # and it has four keys:cur, end, bandwidth, type
+ $jobinfo = $dom->get_block_job_info($pathmain, $flags);
+ ok($jobinfo->{bandwidth} == $bandwidth, "start to block pull and block
job bandwidth is $bandwidth"."MB/S");
+
+ $dom->abort_block_job($pathmain, $flags);
+ $jobinfo = $dom->get_block_job_info($pathmain, $flags);
+ ok($jobinfo->{type} == 0, "abort block job");
+
+ $dom->block_pull($pathmain, $bandwidth, $flags);
+ $jobinfo = $dom->get_block_job_info($pathmain, $flags);
+ ok($jobinfo->{bandwidth} == $bandwidth, "continue to block pull and block
job bandwidth is $bandwidth"."MB/S");
+
+ # set block job bandwidth to 2MB/S
+ $bandwidth = 2;
+ $dom->set_block_job_speed($pathmain, $bandwidth, $flags);
+ $jobinfo = $dom->get_block_job_info($pathmain, $flags);
+ ok($jobinfo->{bandwidth} == $bandwidth, "block job bandwidth is set to
$bandwidth"."MB/S");
+
+ # wait for the end of block pull and timeout is 120s
+ $timeout = 120;
+ while($jobinfo->{cur} < $jobinfo->{end} && $jobinfo->{type}
== 1 && $timeout > 0) {
+ sleep(1);
+ $jobinfo = $dom->get_block_job_info($pathmain, $flags);
+ $timeout--;
+ }
+
+ diag "block pull is not finished in 120S" if $jobinfo->{type} == 1
&& $timeout == 0;
+ ok($jobinfo->{type} == 0, "block pull is finished");
+ }
+}
+# end
--
1.7.1