Re: [libvirt] Error starting domain: internal error: missing IFLA_VF_INFO in netlink response

Hi Laine, Sorry to disturb you. It seemed this issue had been fixed in libvirt-1.2.2/libnl-3.2.22/linux-3.12. But we still got the error on PowerPC platform. I'll appreciate if you could give any suggestion. We are not sure if any netlink implementation in kernel space is missed. The scenario is a little complicated. We installed internal PF and VF kernel modules and want to use <interface type="hostdev" managed="yes"> syntax to start a guest domain with MAC address. # insmod fslinic.ko max_vfs=2 Freescale 10 Gigabit PCI Express Network Driver fslinic 0000:01:00.0: Multiqueue Enabled: Rx Queue count = 1, Tx Queue count = 1 fslinic 0000:01:00.0: Freescale (R) 10 Gigabit Network Connection fslinic 0000:01:00.1: Multiqueue Enabled: Rx Queue count = 1, Tx Queue count = 1 fslinic 0000:01:00.1: Freescale (R) 10 Gigabit Network Connection # insmod fslinicvf.ko Freescale 10 Gigabit PCI Express Network Driver # lspci -mk 00:00.0 "PCI bridge" "Freescale Semiconductor Inc" "Device 0440" -r20 "" "" 01:00.0 "Power PC" "Freescale Semiconductor Inc" "Device 0440" -r20 "" "" 01:00.1 "Power PC" "Freescale Semiconductor Inc" "Device 0440" -r20 "" "" 01:00.4 "Power PC" "Freescale Semiconductor Inc" "Device 0000" -r20 "" "" 01:00.5 "Power PC" "Freescale Semiconductor Inc" "Device 1957" -r20 "" "" 01:01.0 "Power PC" "Freescale Semiconductor Inc" "Device 0000" -r20 "" "" 01:01.1 "Power PC" "Freescale Semiconductor Inc" "Device 1957" -r20 "" "" 0001:00:00.0 "PCI bridge" "Freescale Semiconductor Inc" "Device 0440" -r20 "" "" 0002:00:00.0 "PCI bridge" "Freescale Semiconductor Inc" "Device 0440" -r20 "" "" # echo 1957 0000 > /sys/bus/pci/drivers/vfio-pci/new_id # echo 1957 1957 > /sys/bus/pci/drivers/vfio-pci/new_id # cat interface.xml <domain type='kvm'> <name>interface</name> <memory unit='KiB'>524288</memory> <currentMemory unit='KiB'>524288</currentMemory> <vcpu placement='static'>1</vcpu> <os> <type arch='ppc64' machine='ppce500'>hvm</type> <kernel>/dev/shm/uImage</kernel> <initrd>/dev/shm/ramdisk</initrd> <cmdline>root=/dev/ram rw console=ttyS0,115200</cmdline> </os> <clock offset='utc'/> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>destroy</on_crash> <devices> <emulator>/usr/bin/qemu-system-ppc64</emulator> <controller type='usb' index='0'/> <controller type='pci' index='0' model='pci-root'/> <serial type='pty'> <target port='0'/> </serial> <console type='pty'> <target type='serial' port='0'/> </console> <interface type="hostdev" managed="yes"> <mac address="00:e0:0c:00:20:01"/> <source> <address type="pci" domain="0x0000" bus="0x01" slot="0x00" function="0x04"/> </source> </interface> <memballoon model='virtio'/> </devices> </domain> root@t4240rdb:/var/volatile# virsh start interface error: Failed to start domain interface error: internal error: missing IFLA_VF_INFO in netlink response The debug message is as below: error : virNetClientProgramDispatchError:175 : internal error: missing IFLA_VF_INFO in netlink response Do you have any suggestion to investigate/debug this error? Wish you could reply. Thank you in advance. Best Regards, Olivia