1:30 p.m.
On 10/8/21 12:33 PM, Marc-André Lureau wrote:
Hi On Fri, Oct 8, 2021 at 6:44 PM Stefan Berger
<stefanb(a)linux.ibm.com> wrote: Using swtpm v0.7.0 we can run
swtpm_setup to create default config files for swtpm_setup and
swtpm-localca in session mode. Now a user can start a VM with
ZjQcmQRYFpfptBannerStart
This Message Is From an External Sender
This message came from outside your organization.
ZjQcmQRYFpfptBannerEnd
Hi
On Fri, Oct 8, 2021 at 6:44 PM Stefan Berger <stefanb(a)linux.ibm.com
<mailto:stefanb@linux.ibm.com>> wrote:
Using swtpm v0.7.0 we can run swtpm_setup to create default config
files
for swtpm_setup and swtpm-localca in session mode. Now a user can
start
a VM with an attached TPM without having to run this program on the
command line before. This program needs to run once.
This patch addresses the issue raised in
https://bugzilla.redhat.com/show_bug.cgi?id=2010649
<https://bugzilla.redhat.com/show_bug.cgi?id=2010649>
Signed-off-by: Stefan Berger <stefanb(a)linux.ibm.com
<mailto:stefanb@linux.ibm.com>>
---
v3:
- Removed logfile parameter
I guess it's redirected to libvirt log then?
So you are saying it should capture the stderr output ?
v2:
- fixed return code if swtpm_setup doesn't support the option
---
src/qemu/qemu_tpm.c | 39 +++++++++++++++++++++++++++++++++++++++
src/util/virtpm.c | 1 +
src/util/virtpm.h | 1 +
3 files changed, 41 insertions(+)
diff --git a/src/qemu/qemu_tpm.c b/src/qemu/qemu_tpm.c
index 100481503c..434c357c24 100644
--- a/src/qemu/qemu_tpm.c
+++ b/src/qemu/qemu_tpm.c
@@ -385,6 +385,42 @@ qemuTPMSetupEncryption(const unsigned char
*secretuuid,
return virCommandSetSendBuffer(cmd, g_steal_pointer(&secret),
secret_len);
}
+
+/*
+ * qemuTPMCreateConfigFiles: run swtpm_setup
--create-config-files skip-if-exist
+ */
+static int
+qemuTPMCreateConfigFiles(void)
+{
+ g_autofree char *swtpm_setup = virTPMGetSwtpmSetup();
+ g_autoptr(virCommand) cmd = NULL;
+ int exitstatus;
+
+ if (!swtpm_setup)
+ return -1;
I think what Daniel was saying is that this shouldn't fail suddenly
for users with older swtpm that already have the configuration setup.
The above only fails if swtm_setup is not installed, if that's what you
mean. That's when swtpm_setup is NULL.
If you run `swptm_setup --create-config-files skip-if-exist` when any
one of the 3 config files already exist, it will do nothing and exit with 0.
+
+ if (!virTPMSwtpmSetupCapsGet(
+ VIR_TPM_SWTPM_SETUP_FEATURE_CMDARG_CREATE_CONFIG_FILES))
+ return 0;
This is the case when swtpm_setup doesn't support --create-config-files.
That's when the user has to use the old
/usr/share/swtpm/swptm-create-user-config-files to create the config
files, which will then be located at the same place that `swptm_setup
--create-config-files skip-if-exist` would create them or check whether
any one of them exist and skip.
3 config files will be created and if the user then removes 1 or 2 of
them he created an invalid configuration and the start of the next VM
will fail due to a bad configuration with missing config files. The
config files would only be created again if all 3 were missing.
+
+ cmd = virCommandNew(swtpm_setup);
+ if (!cmd)
+ return -1;
+
+ virCommandAddArgList(cmd, "--create-config-files",
"skip-if-exist", NULL);
+ virCommandClearCaps(cmd);
+
+ if (virCommandRun(cmd, &exitstatus) < 0 || exitstatus != 0) {
+ virReportError(VIR_ERR_INTERNAL_ERROR,
+ _("Could not run '%s' to create config
files. exitstatus: %d",
+ swtpm_setup, exitstatus);
+ return -1;
In the error case the stderr output of swtpm_setup should probably show
up here?
+ }
+
+ return 0;
+}
+
+
/*
* qemuTPMEmulatorRunSetup
*
@@ -432,6 +468,9 @@ qemuTPMEmulatorRunSetup(const char *storagepath,
"this requires privileged mode
for a "
"TPM 1.2\n"), 0600);
+ if (!privileged && qemuTPMCreateConfigFiles())
+ return -1;
+
cmd = virCommandNew(swtpm_setup);
if (!cmd)
return -1;
diff --git a/src/util/virtpm.c b/src/util/virtpm.c
index 1a567139b4..0f50de866c 100644
--- a/src/util/virtpm.c
+++ b/src/util/virtpm.c
@@ -45,6 +45,7 @@ VIR_ENUM_IMPL(virTPMSwtpmFeature,
VIR_ENUM_IMPL(virTPMSwtpmSetupFeature,
VIR_TPM_SWTPM_SETUP_FEATURE_LAST,
"cmdarg-pwdfile-fd",
+ "cmdarg-create-config-files",
);
/**
diff --git a/src/util/virtpm.h b/src/util/virtpm.h
index d021a083b4..3bb03b3b33 100644
--- a/src/util/virtpm.h
+++ b/src/util/virtpm.h
@@ -38,6 +38,7 @@ typedef enum {
typedef enum {
VIR_TPM_SWTPM_SETUP_FEATURE_CMDARG_PWDFILE_FD,
+ VIR_TPM_SWTPM_SETUP_FEATURE_CMDARG_CREATE_CONFIG_FILES,
VIR_TPM_SWTPM_SETUP_FEATURE_LAST
} virTPMSwtpmSetupFeature;
--
2.31.1