12:09 p.m.
From: Ashish Mittal <Ashish.Mittal(a)veritas.com>
Add a new TLS X.509 certificate type - "vxhs". This will handle the
creation of a TLS certificate capability for properly configured
VxHS network block device clients.
The following describes the behavior of TLS for VxHS block device:
(1) Two new options have been added in /etc/libvirt/qemu.conf
to control TLS behavior with VxHS block devices
"vxhs_tls" and "vxhs_tls_x509_cert_dir".
(2) Setting "vxhs_tls=1" in /etc/libvirt/qemu.conf will enable
TLS for VxHS block devices.
(3) "vxhs_tls_x509_cert_dir" can be set to the full path where the
TLS CA certificate and the client certificate and keys are saved.
If this value is missing, the "default_tls_x509_cert_dir" will be
used instead. If the environment is not configured properly the
authentication to the VxHS server will fail.
Signed-off-by: Ashish Mittal <Ashish.Mittal(a)veritas.com>
Signed-off-by: John Ferlan <jferlan(a)redhat.com>
---
src/qemu/libvirtd_qemu.aug | 4 ++++
src/qemu/qemu.conf | 34 ++++++++++++++++++++++++++++++++++
src/qemu/qemu_conf.c | 16 ++++++++++++++++
src/qemu/qemu_conf.h | 3 +++
src/qemu/test_libvirtd_qemu.aug.in | 2 ++
5 files changed, 59 insertions(+)
diff --git a/src/qemu/libvirtd_qemu.aug b/src/qemu/libvirtd_qemu.aug
index e1983d1..c19bf3a 100644
--- a/src/qemu/libvirtd_qemu.aug
+++ b/src/qemu/libvirtd_qemu.aug
@@ -115,6 +115,9 @@ module Libvirtd_qemu =
let memory_entry = str_entry "memory_backing_dir"
+ let vxhs_entry = bool_entry "vxhs_tls"
+ | str_entry "vxhs_tls_x509_cert_dir"
+
(* Each entry in the config is one of the following ... *)
let entry = default_tls_entry
| vnc_entry
@@ -133,6 +136,7 @@ module Libvirtd_qemu =
| nvram_entry
| gluster_debug_level_entry
| memory_entry
+ | vxhs_entry
let comment = [ label "#comment" . del /#[ \t]*/ "# " . store
/([^ \t\n][^\n]*)?/ . del /\n/ "\n" ]
let empty = [ label "#empty" . eol ]
diff --git a/src/qemu/qemu.conf b/src/qemu/qemu.conf
index f977e3b..2d20d79 100644
--- a/src/qemu/qemu.conf
+++ b/src/qemu/qemu.conf
@@ -258,6 +258,40 @@
#chardev_tls_x509_secret_uuid = "00000000-0000-0000-0000-000000000000"
+# Enable use of TLS encryption for all VxHS network block devices that
+# don't specifically disable.
+#
+# When the VxHS network block device server is set up appropriately,
+# x509 certificates are required for authentication between the clients
+# (qemu processes) and the remote VxHS server.
+#
+# It is necessary to setup CA and issue the client certificate before
+# enabling this.
+#
+#vxhs_tls = 1
+
+
+# In order to override the default TLS certificate location for VxHS
+# device TCP certificates, supply a valid path to the certificate directory.
+# This is used to authenticate the VxHS block device clients to the VxHS
+# server.
+#
+# If the provided path does not exist then the default_tls_x509_cert_dir
+# path will be used.
+#
+# VxHS block device clients expect the client certificate and key to be
+# present in the certificate directory along with the CA master certificate.
+# If using the default environment, default_tls_x509_verify must be configured.
+# The server key as well as secret UUID that would decrypt it is not used.
+# Thus a VxHS directory must contain the following:
+#
+# ca-cert.pem - the CA master certificate
+# client-cert.pem - the client certificate signed with the ca-cert.pem
+# client-key.pem - the client private key
+#
+#vxhs_tls_x509_cert_dir = "/etc/pki/libvirt-vxhs"
+
+
# In order to override the default TLS certificate location for migration
# certificates, supply a valid path to the certificate directory. If the
# provided path does not exist then the default_tls_x509_cert_dir path
diff --git a/src/qemu/qemu_conf.c b/src/qemu/qemu_conf.c
index ab5f7cc..bcf798d 100644
--- a/src/qemu/qemu_conf.c
+++ b/src/qemu/qemu_conf.c
@@ -283,6 +283,7 @@ virQEMUDriverConfigPtr virQEMUDriverConfigNew(bool privileged)
SET_TLS_X509_CERT_DEFAULT(spice);
SET_TLS_X509_CERT_DEFAULT(chardev);
SET_TLS_X509_CERT_DEFAULT(migrate);
+ SET_TLS_X509_CERT_DEFAULT(vxhs);
#undef SET_TLS_X509_CERT_DEFAULT
@@ -380,6 +381,8 @@ static void virQEMUDriverConfigDispose(void *obj)
VIR_FREE(cfg->chardevTLSx509certdir);
VIR_FREE(cfg->chardevTLSx509secretUUID);
+ VIR_FREE(cfg->vxhsTLSx509certdir);
+
VIR_FREE(cfg->migrateTLSx509certdir);
VIR_FREE(cfg->migrateTLSx509secretUUID);
@@ -457,6 +460,7 @@ virQEMUDriverConfigTLSDirResetDefaults(virQEMUDriverConfigPtr cfg)
CHECK_RESET_CERT_DIR_DEFAULT(spice);
CHECK_RESET_CERT_DIR_DEFAULT(chardev);
CHECK_RESET_CERT_DIR_DEFAULT(migrate);
+ CHECK_RESET_CERT_DIR_DEFAULT(vxhs);
return 0;
}
@@ -556,6 +560,10 @@ int virQEMUDriverConfigLoadFile(virQEMUDriverConfigPtr cfg,
goto cleanup;
if (virConfGetValueBool(conf, "spice_auto_unix_socket",
&cfg->spiceAutoUnixSocket) < 0)
goto cleanup;
+ if (virConfGetValueBool(conf, "vxhs_tls", &cfg->vxhsTLS) < 0)
+ goto cleanup;
+ if (virConfGetValueString(conf, "vxhs_tls_x509_cert_dir",
&cfg->vxhsTLSx509certdir) < 0)
+ goto cleanup;
#define GET_CONFIG_TLS_CERTINFO(val) \
do { \
@@ -976,6 +984,14 @@ virQEMUDriverConfigValidate(virQEMUDriverConfigPtr cfg)
return -1;
}
+ if (STRNEQ(cfg->vxhsTLSx509certdir, SYSCONFDIR "/pki/qemu") &&
+ !virFileExists(cfg->vxhsTLSx509certdir)) {
+ virReportError(VIR_ERR_CONF_SYNTAX,
+ _("vxhs_tls_x509_cert_dir directory '%s' does not
exist"),
+ cfg->vxhsTLSx509certdir);
+ return -1;
+ }
+
return 0;
}
diff --git a/src/qemu/qemu_conf.h b/src/qemu/qemu_conf.h
index d469b50..13b6f81 100644
--- a/src/qemu/qemu_conf.h
+++ b/src/qemu/qemu_conf.h
@@ -203,6 +203,9 @@ struct _virQEMUDriverConfig {
unsigned int glusterDebugLevel;
char *memoryBackingDir;
+
+ bool vxhsTLS;
+ char *vxhsTLSx509certdir;
};
/* Main driver state */
diff --git a/src/qemu/test_libvirtd_qemu.aug.in b/src/qemu/test_libvirtd_qemu.aug.in
index 676d48c..688e5b9 100644
--- a/src/qemu/test_libvirtd_qemu.aug.in
+++ b/src/qemu/test_libvirtd_qemu.aug.in
@@ -25,6 +25,8 @@ module Test_libvirtd_qemu =
{ "chardev_tls_x509_cert_dir" = "/etc/pki/libvirt-chardev" }
{ "chardev_tls_x509_verify" = "1" }
{ "chardev_tls_x509_secret_uuid" =
"00000000-0000-0000-0000-000000000000" }
+{ "vxhs_tls" = "1" }
+{ "vxhs_tls_x509_cert_dir" = "/etc/pki/libvirt-vxhs" }
{ "migrate_tls_x509_cert_dir" = "/etc/pki/libvirt-migrate" }
{ "migrate_tls_x509_verify" = "1" }
{ "migrate_tls_x509_secret_uuid" =
"00000000-0000-0000-0000-000000000000" }
--
2.9.5