On 20.11.2012 19:47, Ján Tomko wrote:
Both generated with qemu-system-x86_64 --help > qemu-1.2.0
qemu-system-x86_64 \ -device ? \ -device pci-assign,? \ -device virtio-blk-pci,? \ -device virtio-net-pci,? \ -device scsi-disk,? \ -device PIIX4_PM,? \ -device usb-redir,? \ -device ide-drive,? \ -device usb-host,? 2> qemu-1.2.0-device
It seems I missed a few -device flags when doing this last time and I mixed up qemu and qemu-kvm. --- tests/qemuhelpdata/qemu-1.2.0 | 1 + tests/qemuhelpdata/qemu-1.2.0-device | 51 +++++-- tests/qemuhelpdata/qemu-kvm-1.2.0 | 276 ++++++++++++++++++++++++++++++ tests/qemuhelpdata/qemu-kvm-1.2.0-device | 222 ++++++++++++++++++++++++ tests/qemuhelptest.c | 106 +++++++++++- 5 files changed, 644 insertions(+), 12 deletions(-) create mode 100644 tests/qemuhelpdata/qemu-kvm-1.2.0 create mode 100644 tests/qemuhelpdata/qemu-kvm-1.2.0-device
diff --git a/tests/qemuhelpdata/qemu-1.2.0 b/tests/qemuhelpdata/qemu-1.2.0 index f52fdcb..78375f3 100644 --- a/tests/qemuhelpdata/qemu-1.2.0 +++ b/tests/qemuhelpdata/qemu-1.2.0 @@ -175,6 +175,7 @@ Character device options: -chardev stdio,id=id[,mux=on|off][,signal=on|off] -chardev tty,id=id,path=path[,mux=on|off] -chardev parport,id=id,path=path[,mux=on|off] +-chardev spicevmc,id=id,name=name[,debug=debug]
-iscsi [user=user][,password=password] [,header-digest=CRC32C|CR32C-NONE|NONE-CRC32C|NONE diff --git a/tests/qemuhelpdata/qemu-1.2.0-device b/tests/qemuhelpdata/qemu-1.2.0-device index 9230a93..5613e00 100644 --- a/tests/qemuhelpdata/qemu-1.2.0-device +++ b/tests/qemuhelpdata/qemu-1.2.0-device @@ -8,6 +8,7 @@ name "esp", bus System name "sysbus-ohci", bus System, desc "OHCI USB Controller" name "virtio-blk-pci", bus PCI, alias "virtio-blk" name "usb-uas", bus usb-bus +name "qxl-vga", bus PCI, desc "Spice QXL GPU (primary, vga compatible)" name "ide-drive", bus IDE, desc "virtual IDE disk or CD-ROM (legacy)" name "x3130-upstream", bus PCI, desc "TI X3130 Upstream Port of PCI Express Switch" name "cirrus-vga", bus PCI, desc "Cirrus CLGD 54xx VGA" @@ -32,6 +33,7 @@ name "pci-ohci", bus PCI, desc "Apple USB Controller" name "nec-usb-xhci", bus PCI name "xio3130-downstream", bus PCI, desc "TI X3130 Downstream Port of PCI Express Switch" name "virtserialport", bus virtio-serial-bus +name "usb-redir", bus usb-bus name "usb-braille", bus usb-bus name "scsi-cd", bus SCSI, desc "virtual SCSI CD-ROM" name "usb-wacom-tablet", bus usb-bus, desc "QEMU PenPartner Tablet" @@ -64,9 +66,9 @@ name "usb-bt-dongle", bus usb-bus name "usb-tablet", bus usb-bus name "isa-vga", bus ISA name "usb-kbd", bus usb-bus -name "kvm-pci-assign", bus PCI, alias "pci-assign", desc "KVM-based PCI passthrough" name "isa-applesmc", bus ISA name "rtl8139", bus PCI +name "qxl", bus PCI, desc "Spice QXL GPU (secondary)" name "i82557a", bus PCI, desc "Intel i82557A Ethernet" name "i82557c", bus PCI, desc "Intel i82557C Ethernet" name "usb-audio", bus usb-bus @@ -95,16 +97,6 @@ name "vt82c686b-usb-uhci", bus PCI name "usb-ehci", bus PCI name "i6300esb", bus PCI name "virtio-scsi-pci", bus PCI -kvm-pci-assign.host=pci-host-devaddr -kvm-pci-assign.prefer_msi=on/off -kvm-pci-assign.share_intx=on/off -kvm-pci-assign.bootindex=int32 -kvm-pci-assign.configfd=string -kvm-pci-assign.addr=pci-devfn -kvm-pci-assign.romfile=string -kvm-pci-assign.rombar=uint32 -kvm-pci-assign.multifunction=on/off -kvm-pci-assign.command_serr_enable=on/off virtio-blk-pci.class=hex32 virtio-blk-pci.drive=drive virtio-blk-pci.logical_block_size=blocksize @@ -179,3 +171,40 @@ scsi-disk.wwn=hex64 scsi-disk.channel=uint32 scsi-disk.scsi-id=uint32 scsi-disk.lun=uint32 +PIIX4_PM.smb_io_base=uint32 +PIIX4_PM.disable_s3=uint8 +PIIX4_PM.disable_s4=uint8 +PIIX4_PM.s4_val=uint8 +PIIX4_PM.addr=pci-devfn +PIIX4_PM.romfile=string +PIIX4_PM.rombar=uint32 +PIIX4_PM.multifunction=on/off +PIIX4_PM.command_serr_enable=on/off +usb-redir.chardev=chr +usb-redir.debug=uint8 +usb-redir.filter=string +usb-redir.bootindex=int32 +usb-redir.port=string +usb-redir.full-path=on/off +ide-drive.drive=drive +ide-drive.logical_block_size=blocksize +ide-drive.physical_block_size=blocksize +ide-drive.min_io_size=uint16 +ide-drive.opt_io_size=uint32 +ide-drive.bootindex=int32 +ide-drive.discard_granularity=uint32 +ide-drive.ver=string +ide-drive.wwn=hex64 +ide-drive.serial=string +ide-drive.model=string +ide-drive.unit=uint32 +usb-host.hostbus=uint32 +usb-host.hostaddr=uint32 +usb-host.hostport=string +usb-host.vendorid=hex32 +usb-host.productid=hex32 +usb-host.isobufs=uint32 +usb-host.bootindex=int32 +usb-host.pipeline=on/off +usb-host.port=string +usb-host.full-path=on/off diff --git a/tests/qemuhelpdata/qemu-kvm-1.2.0 b/tests/qemuhelpdata/qemu-kvm-1.2.0 new file mode 100644 index 0000000..372002a --- /dev/null +++ b/tests/qemuhelpdata/qemu-kvm-1.2.0 @@ -0,0 +1,276 @@ +QEMU emulator version 1.2.0 (qemu-kvm-devel), Copyright (c) 2003-2008 Fabrice Bellard +usage: qemu-system-x86_64 [options] [disk_image] + +'disk_image' is a raw hard disk image for IDE hard disk 0 + +Standard options: +-h or -help display this help and exit +-version display version information and exit +-machine [type=]name[,prop[=value][,...]] + selects emulated machine (-machine ? for list) + property accel=accel1[:accel2[:...]] selects accelerator + supported accelerators are kvm, xen, tcg (default: tcg) + kernel_irqchip=on|off controls accelerated irqchip support + kvm_shadow_mem=size of KVM shadow MMU + dump-guest-core=on|off include guest memory in a core dump (default=on) +-cpu cpu select CPU (-cpu ? for list) +-smp n[,maxcpus=cpus][,cores=cores][,threads=threads][,sockets=sockets] + set the number of CPUs to 'n' [default=1] + maxcpus= maximum number of total cpus, including + offline CPUs for hotplug, etc + cores= number of CPU cores on one socket + threads= number of threads on one CPU core + sockets= number of discrete sockets in the system +-numa node[,mem=size][,cpus=cpu[-cpu]][,nodeid=node] +-fda/-fdb file use 'file' as floppy disk 0/1 image +-hda/-hdb file use 'file' as IDE hard disk 0/1 image +-hdc/-hdd file use 'file' as IDE hard disk 2/3 image +-cdrom file use 'file' as IDE cdrom image (cdrom is ide1 master) +-drive [file=file][,if=type][,bus=n][,unit=m][,media=d][,index=i] + [,cyls=c,heads=h,secs=s[,trans=t]][,snapshot=on|off] + [,cache=writethrough|writeback|none|directsync|unsafe][,format=f] + [,serial=s][,addr=A][,id=name][,aio=threads|native] + [,readonly=on|off][,copy-on-read=on|off] + [[,bps=b]|[[,bps_rd=r][,bps_wr=w]]][[,iops=i]|[[,iops_rd=r][,iops_wr=w]] + use 'file' as a drive image +-set group.id.arg=value + set <arg> parameter for item <id> of type <group> + i.e. -set drive.$id.file=/path/to/image +-global driver.prop=value + set a global default for a driver property +-mtdblock file use 'file' as on-board Flash memory image +-sd file use 'file' as SecureDigital card image +-pflash file use 'file' as a parallel flash image +-boot [order=drives][,once=drives][,menu=on|off] + [,splash=sp_name][,splash-time=sp_time] + 'drives': floppy (a), hard disk (c), CD-ROM (d), network (n) + 'sp_name': the file's name that would be passed to bios as logo picture, if menu=on + 'sp_time': the period that splash picture last if menu=on, unit is ms +-snapshot write to temporary files instead of disk image files +-m megs set virtual RAM size to megs MB [default=128] +-mem-path FILE provide backing storage for guest RAM +-mem-prealloc preallocate guest memory (use with -mem-path) +-k language use keyboard layout (for example 'fr' for French) +-audio-help print list of audio drivers and their options +-soundhw c1,... enable audio support + and only specified sound cards (comma separated list) + use -soundhw ? to get the list of supported cards + use -soundhw all to enable all of them +-balloon none disable balloon device +-balloon virtio[,addr=str] + enable virtio balloon device (default) +-usb enable the USB driver (will be the default soon) +-usbdevice name add the host or guest USB device 'name' +-device driver[,prop[=value][,...]] + add device (based on driver) + prop=value,... sets driver properties + use -device ? to print all possible drivers + use -device driver,? to print all possible properties + +File system options: +-fsdev fsdriver,id=id[,path=path,][security_model={mapped-xattr|mapped-file|passthrough|none}] + [,writeout=immediate][,readonly][,socket=socket|sock_fd=sock_fd] + +Virtual File system pass-through options: +-virtfs local,path=path,mount_tag=tag,security_model=[mapped-xattr|mapped-file|passthrough|none] + [,writeout=immediate][,readonly][,socket=socket|sock_fd=sock_fd] +-virtfs_synth Create synthetic file system image + +-name string1[,process=string2] + set the name of the guest + string1 sets the window title and string2 the process name (on Linux) +-uuid %08x-%04x-%04x-%04x-%012x + specify machine UUID + +Display options: +-display sdl[,frame=on|off][,alt_grab=on|off][,ctrl_grab=on|off] + [,window_close=on|off]|curses|none| + vnc=<display>[,<optargs>] + select display type +-nographic disable graphical output and redirect serial I/Os to console +-curses use a curses/ncurses interface instead of SDL +-no-frame open SDL window without a frame and window decorations +-alt-grab use Ctrl-Alt-Shift to grab mouse (instead of Ctrl-Alt) +-ctrl-grab use Right-Ctrl to grab mouse (instead of Ctrl-Alt) +-no-quit disable SDL window close capability +-sdl enable SDL +-spice <args> enable spice +-portrait rotate graphical output 90 deg left (only PXA LCD) +-rotate <deg> rotate graphical output some deg left (only PXA LCD) +-vga [std|cirrus|vmware|qxl|xenfb|none] + select video card type +-full-screen start in full screen +-vnc display start a VNC server on display + +i386 target only: +-win2k-hack use it when installing Windows 2000 to avoid a disk full bug +-no-fd-bootchk disable boot signature checking for floppy disks +-no-acpi disable ACPI +-no-hpet disable HPET +-acpitable [sig=str][,rev=n][,oem_id=str][,oem_table_id=str][,oem_rev=n][,asl_compiler_id=str][,asl_compiler_rev=n][,{data|file}=file1[:file2]...] + ACPI table description +-smbios file=binary + load SMBIOS entry from binary file +-smbios type=0[,vendor=str][,version=str][,date=str][,release=%d.%d] + specify SMBIOS type 0 fields +-smbios type=1[,manufacturer=str][,product=str][,version=str][,serial=str] + [,uuid=uuid][,sku=str][,family=str] + specify SMBIOS type 1 fields + +Network options: +-net nic[,vlan=n][,macaddr=mac][,model=type][,name=str][,addr=str][,vectors=v] + create a new Network Interface Card and connect it to VLAN 'n' +-net user[,vlan=n][,name=str][,net=addr[/mask]][,host=addr][,restrict=on|off] + [,hostname=host][,dhcpstart=addr][,dns=addr][,tftp=dir][,bootfile=f] + [,hostfwd=rule][,guestfwd=rule][,smb=dir[,smbserver=addr]] + connect the user mode network stack to VLAN 'n', configure its + DHCP server and enabled optional services +-net tap[,vlan=n][,name=str][,fd=h][,ifname=name][,script=file][,downscript=dfile][,helper=helper][,sndbuf=nbytes][,vnet_hdr=on|off][,vhost=on|off][,vhostfd=h][,vhostforce=on|off] + connect the host TAP network interface to VLAN 'n'
This line adds a space at EOL. ACK if that's fixed. Michal