10:17 a.m.
On 08/08/2013 02:43 AM, John Ferlan wrote:
Add more iSCSI examples including having a secret attached. There are
4 new
examples one for each way to have an iSCSI - a network disk using virtio,
^
Missing punctuation.
a passthrough network lun using scsi, a volume disk using
"mode='host'",
and a volume disk using "mode='direct'"
---
docs/formatdomain.html.in | 57 ++++++++++++++++++++++++++++++++++++++++-------
1 file changed, 49 insertions(+), 8 deletions(-)
diff --git a/docs/formatdomain.html.in b/docs/formatdomain.html.in
index dd22b6d..01253ef 100644
--- a/docs/formatdomain.html.in
+++ b/docs/formatdomain.html.in
@@ -1514,6 +1514,42 @@
<source pool='blk-pool0' volume='blk-pool0-vol0'/>
<target dev='hda' bus='ide'/>
</disk>
+ <disk type='network' device='disk'>
+ <driver name='qemu' type='raw'/>
+ <source protocol='iscsi'
name='iqn.2013-06.com.example:iscsi/2'>
+ <host name='example.com' port='3260'/>
+ <source>
^
Missing slash.
+ <auth username='myuser'>
+ <secret type='chap' usage='libvirtiscsi'/>
+ </auth>
+ <target dev='vda' bus='virtio'/>
+ </disk>
+ <disk type='network' device='lun'>
+ <driver name='qemu' type='raw'/>
+ <source protocol='iscsi'
name='iqn.2013-06.com.example:iscsi/1'>
+ <host name='example.com' port='3260'/>
+ <source>
^
Here too.
+ <auth username='myuser'>
+ <secret type='chap' usage='libvirtiscsi'/>
+ </auth>
+ <target dev='sda' bus='scsi'/>
+ </disk>
+ <disk type='volume' device='disk'>
+ <driver name='qemu' type='raw'/>
+ <source pool='iscsi-pool' volume='unit:0:0:1'
mode='host'/>
+ <auth username='myuser'>
+ <secret type='chap' usage='libvirtiscsi'/>
+ </auth>
+ <target dev='vda' bus='virtio'/>
+ </disk>
+ <disk type='volume' device='disk'>
+ <driver name='qemu' type='raw'/>
+ <source pool='iscsi-pool' volume='unit:0:0:2'
mode='direct'/>
+ <auth username='myuser'>
+ <secret type='chap' usage='libvirtiscsi'/>
+ </auth>
+ <target dev='vda' bus='virtio'/>
+ </disk>
</devices>
...</pre>
@@ -1602,15 +1638,20 @@
specifies the name of storage pool (managed by libvirt) where the disk
source resides, and attribute <code>volume</code> specifies the name
of
storage volume (managed by libvirt) used as the disk source. For a
- "volume" type disk, if the underlying storage pool is
"iscsi", attribute
- <code>mode</code> (<span class="since">since
1.1.1</span>) can be used
- to indicate how to represent the LUN as the disk source. The value
- "host" indicates to use the LUN's path as it shows up on host,
e.g.
- /dev/disk/by-path/ip-10.11.12.9:3260-iscsi-iqn.2013-06.fc:iscsi.iscsi0-lun-1).
- The value "direct" indicates to use the storage pool's
- <code>source</code> element <code>host</code> attribute
as the
- disk source for the libiscsi URI, e.g.
+ "volume" <code>type</code> disk, if the underlying storage
pool is
+ "iscsi", then use the output of the value from the "Name"
column of
+ the <code>virsh vol-list [pool-name]</code> command for the
+ <code>volume</code> attribute field.
Isn't this true for all storage pools and mentioned just a few sentences earlier?
Use the attribute
+ <code>mode</code> (<span class="since">since
1.1.1</span>) to
+ indicate how to represent the LUN as the disk source.
+ Using "direct" as the <code>mode</code> value indicates to
use the
+ storage pool's <code>source</code> element
<code>host</code>
+ attribute as the disk source to generate the libiscsi URI, e.g.
file=iscsi://demo.org:6000/iqn.1992-01.com.example/1.
+ Using "host" as the <code>mode</code> value indicates to
use the
+ LUN's path as it shows up on host, e.g.
+ /dev/disk/by-path/ip-10.11.12.9:3260-iscsi-iqn.2013-06.fc:iscsi.iscsi0-lun-1).
It would be nicer if the URI and the path were for the same disk.
+ If <code>mode</code> is not specified, the
default is to use "host".
<span class="since">Since 0.0.3;
<code>type='dir'</code> since
0.7.5; <code>type='network'</code> since
0.8.7; <code>protocol='iscsi'</code> since 1.0.4;
ACK with the "Name" column reference removed.
Jan