7:38 a.m.
This adds a new flag, VIR_MIGRATE_PAUSED, that mandates pausing
the migrated VM before starting it.
* include/libvirt/libvirt.h.in (virDomainMigrateFlags): Add
VIR_MIGRATE_PAUSED.
* src/qemu/qemu_driver.c (qemudDomainMigrateFinish2): Handle
VIR_MIGRATE_PAUSED.
* tools/virsh.c (opts_migrate): Add --suspend.
(cmdMigrate): Handle it.
* tools/virsh.pod (migrate): Document it.
---
include/libvirt/libvirt.h.in | 1 +
src/libvirt.c | 1 +
src/qemu/qemu_driver.c | 33 +++++++++++++++++++++------------
tools/virsh.c | 5 ++++-
tools/virsh.pod | 7 ++++---
5 files changed, 31 insertions(+), 16 deletions(-)
diff --git a/include/libvirt/libvirt.h.in b/include/libvirt/libvirt.h.in
index 5bc7694..0488cbf 100644
--- a/include/libvirt/libvirt.h.in
+++ b/include/libvirt/libvirt.h.in
@@ -341,6 +341,7 @@ typedef enum {
VIR_MIGRATE_TUNNELLED = (1 << 2), /* tunnel migration data over
libvirtd connection */
VIR_MIGRATE_PERSIST_DEST = (1 << 3), /* persist the VM on the destination
*/
VIR_MIGRATE_UNDEFINE_SOURCE = (1 << 4), /* undefine the VM on the source */
+ VIR_MIGRATE_PAUSED = (1 << 5), /* pause on remote side */
} virDomainMigrateFlags;
/* Domain migration. */
diff --git a/src/libvirt.c b/src/libvirt.c
index 05e45f3..2ced604 100644
--- a/src/libvirt.c
+++ b/src/libvirt.c
@@ -3179,6 +3179,7 @@ virDomainMigrateDirect (virDomainPtr domain,
* on the destination host.
* VIR_MIGRATE_UNDEFINE_SOURCE If the migration is successful, undefine the
* domain on the source host.
+ * VIR_MIGRATE_PAUSED Leave the domain suspended on the remote side.
*
* VIR_MIGRATE_TUNNELLED requires that VIR_MIGRATE_PEER2PEER be set.
* Applications using the VIR_MIGRATE_PEER2PEER flag will probably
diff --git a/src/qemu/qemu_driver.c b/src/qemu/qemu_driver.c
index b7bc677..4569998 100644
--- a/src/qemu/qemu_driver.c
+++ b/src/qemu/qemu_driver.c
@@ -7528,24 +7528,33 @@ qemudDomainMigrateFinish2 (virConnectPtr dconn,
qemuDomainObjPrivatePtr priv = vm->privateData;
dom = virGetDomain (dconn, vm->def->name, vm->def->uuid);
- /* run 'cont' on the destination, which allows migration on qemu
- * >= 0.10.6 to work properly. This isn't strictly necessary on
- * older qemu's, but it also doesn't hurt anything there
- */
- qemuDomainObjEnterMonitorWithDriver(driver, vm);
- if (qemuMonitorStartCPUs(priv->mon, dconn) < 0) {
- if (virGetLastError() == NULL)
- qemudReportError(dconn, NULL, NULL, VIR_ERR_INTERNAL_ERROR,
- "%s", _("resume operation
failed"));
+ if (!(flags & VIR_MIGRATE_PAUSED)) {
+ /* run 'cont' on the destination, which allows migration on qemu
+ * >= 0.10.6 to work properly. This isn't strictly necessary on
+ * older qemu's, but it also doesn't hurt anything there
+ */
+ qemuDomainObjEnterMonitorWithDriver(driver, vm);
+ if (qemuMonitorStartCPUs(priv->mon, dconn) < 0) {
+ if (virGetLastError() == NULL)
+ qemudReportError(dconn, NULL, NULL, VIR_ERR_INTERNAL_ERROR,
+ "%s", _("resume operation
failed"));
+ qemuDomainObjExitMonitorWithDriver(driver, vm);
+ goto endjob;
+ }
qemuDomainObjExitMonitorWithDriver(driver, vm);
- goto endjob;
+
+ vm->state = VIR_DOMAIN_RUNNING;
}
- qemuDomainObjExitMonitorWithDriver(driver, vm);
- vm->state = VIR_DOMAIN_RUNNING;
event = virDomainEventNewFromObj(vm,
VIR_DOMAIN_EVENT_RESUMED,
VIR_DOMAIN_EVENT_RESUMED_MIGRATED);
+ if (vm->state == VIR_DOMAIN_PAUSED) {
+ qemuDomainEventQueue(driver, event);
+ event = virDomainEventNewFromObj(vm,
+ VIR_DOMAIN_EVENT_SUSPENDED,
+ VIR_DOMAIN_EVENT_SUSPENDED_PAUSED);
+ }
virDomainSaveStatus(dconn, driver->caps, driver->stateDir, vm);
} else {
qemudShutdownVMDaemon (dconn, driver, vm);
diff --git a/tools/virsh.c b/tools/virsh.c
index 9faac35..9871b4b 100644
--- a/tools/virsh.c
+++ b/tools/virsh.c
@@ -2478,6 +2478,7 @@ static const vshCmdOptDef opts_migrate[] = {
{"tunnelled", VSH_OT_BOOL, 0, gettext_noop("tunnelled
migration")},
{"persistent", VSH_OT_BOOL, 0, gettext_noop("persist VM on
destination")},
{"undefinesource", VSH_OT_BOOL, 0, gettext_noop("undefine VM on
source")},
+ {"suspend", VSH_OT_BOOL, 0, gettext_noop("do not restart the domain on
the destination host")},
{"domain", VSH_OT_DATA, VSH_OFLAG_REQ, gettext_noop("domain name, id
or uuid")},
{"desturi", VSH_OT_DATA, VSH_OFLAG_REQ, gettext_noop("connection URI
of the destination host")},
{"migrateuri", VSH_OT_DATA, 0, gettext_noop("migration URI, usually
can be omitted")},
@@ -2519,10 +2520,12 @@ cmdMigrate (vshControl *ctl, const vshCmd *cmd)
if (vshCommandOptBool (cmd, "persistent"))
flags |= VIR_MIGRATE_PERSIST_DEST;
-
if (vshCommandOptBool (cmd, "undefinesource"))
flags |= VIR_MIGRATE_UNDEFINE_SOURCE;
+ if (vshCommandOptBool (cmd, "suspend"))
+ flags |= VIR_MIGRATE_PAUSED;
+
if ((flags & VIR_MIGRATE_PEER2PEER) ||
vshCommandOptBool (cmd, "direct")) {
/* For peer2peer migration or direct migration we only expect one URI
diff --git a/tools/virsh.pod b/tools/virsh.pod
index 6ff0151..3830464 100644
--- a/tools/virsh.pod
+++ b/tools/virsh.pod
@@ -302,10 +302,11 @@ except that it does some error checking.
The editor used can be supplied by the C<$EDITOR> environment
variable, or if that is not defined defaults to C<vi>.
-=item B<migrate> optional I<--live> I<domain-id> I<desturi>
I<migrateuri>
+=item B<migrate> optional I<--live> I<--suspend> I<domain-id>
I<desturi> I<migrateuri>
-Migrate domain to another host. Add --live for live migration. The I<desturi>
-is the connection URI of the destination host, and I<migrateuri> is the
+Migrate domain to another host. Add --live for live migration; --suspend
+leaves the domain paused on the destination host. The I<desturi> is the
+connection URI of the destination host, and I<migrateuri> is the
migration URI, which usually can be omitted.
=item B<reboot> I<domain-id>
--
1.6.5.2